Commit graph

1,264,895 commits

Author SHA1 Message Date
Eric Dumazet
577e4432f3 tcp: add sanity checks to rx zerocopy
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.

This patch adds to can_map_frag() these additional checks:

- Page must not be a compound one.
- page->mapping must be NULL.

This fixes the panic reported by ZhangPeng.

syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.

r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
    0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
    &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
    0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
    0x181e42, 0x0)

Fixes: 93ab6cc691 ("tcp: implement mmap() for zero copy receive")
Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/
Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:07:35 +00:00
Fedor Pchelkin
bfb007aebe nfc: nci: free rx_data_reassembly skb on NCI device cleanup
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.

As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:05:31 +00:00
Nikita Zhandarovich
37e8c97e53 net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame()
Syzkaller reported [1] hitting a warning after failing to allocate
resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will
not help much in this case, it might be prudent to switch to
netdev_warn_once(). At the very least it will suppress syzkaller
reports such as [1].

Just in case, use netdev_warn_once() in send_prp_supervision_frame()
for similar reasons.

[1]
HSR: Could not send supervision frame
WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
...
Call Trace:
 <IRQ>
 hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382
 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700
 expire_timers kernel/time/timer.c:1751 [inline]
 __run_timers+0x764/0xb20 kernel/time/timer.c:2022
 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035
 __do_softirq+0x21a/0x8de kernel/softirq.c:553
 invoke_softirq kernel/softirq.c:427 [inline]
 __irq_exit_rcu kernel/softirq.c:632 [inline]
 irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644
 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649
...

This issue is also found in older kernels (at least up to 5.10).

Cc: stable@vger.kernel.org
Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com
Fixes: 121c33b07b ("net: hsr: introduce common code for skb initialization")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 11:29:55 +00:00
Suman Ghosh
c57e32fb29 octeontx2-af: Add filter profiles in hardware to extract packet headers
This patch adds hardware profile supports for extracting packet headers.
It makes sure that hardware is capabale of extracting ICMP, CPT, ERSPAN
headers.

Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 11:28:41 +00:00
Bartosz Golaszewski
6933ba529d gpio: improve the API contract for setting direction
If a GPIO driver returns a positive integer from one of the direction
setter callbacks, we'll end up propagating it to user-space. Whether we
should sanitize the values returned by callbacks is a different question
but let's first improve the documentation and fortify the contract with
GPIO providers.

Reported-by: José Guilherme de Castro Rodrigues <joseguilhermebh@hotmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
2024-01-29 11:45:49 +01:00
Bartosz Golaszewski
88b7049635 gpio: unexport GPIO irq domain functions only used internally
There are no external users for the irq domain helpers so unexport them
and remove the prototypes from the driver header.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-29 11:45:49 +01:00
Bartosz Golaszewski
83a517c777 gpio: cdev: remove leftover function pointer typedefs
The locking wrappers were replaces with lock guards. These typedefs are
no longer needed.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
2024-01-29 11:45:49 +01:00
Qiuxu Zhuo
8eed4e00a3 x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.

  mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
  mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
  mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
  mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
  mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
  Kernel panic - not syncing: Fatal local machine check

The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.

ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.

Therefore, commit

  b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")

replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.

Commit

  6014bc2756 ("x86-64: make access_ok() independent of LAM")

added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.

With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.

  [ bp: Massage commit message. ]

Fixes: b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
2024-01-29 11:40:41 +01:00
Primoz Fiser
aeb262c353 drm/panel: simple: Add EDT ETML1010G3DRA panel
Add support for the EDT ETML1010G3DRA 10.1" 1280x800 LVDS panel.
Datasheet can be found at [1].

[1] https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/Specifications/Active%20Displays/ETML1010G3DRA%20Ver.3-RoHS.pdf

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de
2024-01-29 11:36:04 +01:00
Yannic Moog
7a61bbc10a dt-bindings: display: panel-simple: add ETML1010G3DRA
Add Emerging Display Technology Corp. etml1010g3dra 10.1" LCD-TFT LVDS
panel compatible string.

Signed-off-by: Yannic Moog <y.moog@phytec.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-1-8ec5b48eec05@phytec.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-1-8ec5b48eec05@phytec.de
2024-01-29 11:36:03 +01:00
William-tw Lin
423a54da3c
soc: mediatek: mtk-socinfo: Add driver for getting chip information
Add driver for socinfo retrieval. This patch includes the following:
1. mtk-socinfo driver for chip info retrieval
2. Related changes to Makefile and Kconfig

Signed-off-by: William-tw Lin <william-tw.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231222080739.21706-3-william-tw.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-01-29 11:16:10 +01:00
Bartosz Golaszewski
aafd753555 genirq/irq_sim: Shrink code by using <linux/cleanup.h> helpers
Use the new __free() mechanism to remove all gotos and simplify the error
paths.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240122124243.44002-5-brgl@bgdev.pl
2024-01-29 11:07:57 +01:00
Muralidhara M K
453f0ae797 RAS/AMD/ATL: Add MI300 support
AMD MI300 systems include on-die HBM3 memory and a unique topology. And
they fall under Data Fabric version 4.5 in overall design.

Generally, topology information (IDs, etc.) is gathered from Data Fabric
registers. However, the unique topology for MI300 means that some
topology information is fixed in hardware and follows arbitrary
mappings. Furthermore, not all hardware instances are software-visible,
so register accesses must be adjusted.

Recognize and add helper functions for the new MI300 interleave modes.
Add lookup tables for fixed values where appropriate. Adjust how Die and
Node IDs are found and used.

Also, fix some register bitmasks that were mislabeled.

Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240128155950.1434067-1-yazen.ghannam@amd.com
2024-01-29 10:22:41 +01:00
Christophe JAILLET
622cd3daa8
fs/ntfs3: Slightly simplify ntfs_inode_printk()
The size passed to snprintf() includes the space for the trailing space.
So there is no reason here not to use all the available space.

So remove the -1 when computing 'name_len'.
While at it, use the size of the array directly instead of the intermediate
'name_len' variable.

snprintf() also guaranties that the buffer if NULL terminated, so there is
no need to write an additional trailing NULL "To be sure".

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 12:05:09 +03:00
Nekun
1f5fa4b3b8
fs/ntfs3: Add ioctl operation for directories (FITRIM)
While ntfs3 supports discards, FITRIM ioctl() command has defined
only for regular files. This may confuse users trying to invoke
`fstrim` utility with the directory argument (for example, call
`fstrim <mountpoint>` which is the common practice). In this case,
ioctl() returns -ENOTTY without any error messages in kernel ring
buffer, this may be easily interpreted as no support for discards
in ntfs3 driver.

Currently only FITRIM command implemented in ntfs_ioctl() and
passed inode used only for dereferencing NTFS superblock, so
no need for separate ioctl() handler for directories, just add
existing ntfs_ioctl() handler to ntfs_dir_operations.

Signed-off-by: Nekun <nekokun@firemail.cc>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 12:05:09 +03:00
Edward Adam Davis
731ab1f982
fs/ntfs3: Fix oob in ntfs_listxattr
The length of name cannot exceed the space occupied by ea.

Reported-and-tested-by: syzbot+65e940cfb8f99a97aca7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 12:05:08 +03:00
Dan Carpenter
b2dd7b953c
fs/ntfs3: Fix an NULL dereference bug
The issue here is when this is called from ntfs_load_attr_list().  The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero.  This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line.

Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 12:05:08 +03:00
Alexandre Ghiti
ebd4acc0cb riscv: Fix wrong size passed to local_flush_tlb_range_asid()
local_flush_tlb_range_asid() takes the size as argument, not the end of
the range to flush, so fix this by computing the size from the end and
the start of the range.

Fixes: 7a92fc8b4d ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
2024-01-29 00:53:19 -08:00
Sebastian Ott
9c64e749ce drm/virtio: Set segment size for virtio_gpu device
Set the segment size of the virtio_gpu device to the value
used by the drm helpers when allocating sg lists to fix the
following complaint from DMA_API debug code:

DMA-API: virtio-pci 0000:07:00.0: mapping sg segment longer than
device claims to support [len=262144] [max=65536]

Cc: stable@vger.kernel.org
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7258a4cc-da16-5c34-a042-2a23ee396d56@redhat.com
2024-01-29 11:44:34 +03:00
Andrey Albershteyn
82ef1a5356 xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.

The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.

Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.

Fixes: fdaf1bb3ca ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-01-29 13:48:10 +05:30
Alexander Tsoy
c0787fcff8 Revert "ALSA: usb-audio: Skip setting clock selector for single connections"
This reverts commit 67794f882a.

We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f64125
("ALSA: usb-audio: Explicitly set up the clock selector")

The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29 09:07:57 +01:00
Luka Guzenko
f0d78972f2 ALSA: hda/realtek: Enable Mute LED on HP Laptop 14-fq0xxx
This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.

Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29 09:06:41 +01:00
David Senoner
efb56d84dd ALSA: hda/realtek: Fix the external mic not being recognised for Acer Swift 1 SF114-32
If you connect an external headset/microphone to the 3.5mm jack on the
Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes
that and gives the user the ability to choose between internal and
headset mic.

Signed-off-by: David Senoner <seda18@rolmail.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29 09:06:02 +01:00
Takashi Sakamoto
6d5a2dda9b ALSA: firewire-motu: add support for MOTU 896 mk3 FireWire and Hybrid
Mark of the Unicorn released 896 mk3 FireWire in 2008 as part of the third
generation of its FireWire series. In 2011, 896 mk3 hybrid was released to
support USB protocol.

It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in optical interfaces. The model supports
transmission of PCM frames as well as MIDI messages.

The 896 mk3 FireWire consists of below ICs:

 * Texas Instruments TSB41AB2
 * Xilinx Spartan-3A FPGA, XC3S500E
 * Texas Instruments TMS320C6722
 * Microchip (Atmel) AT91SAM SAM7S256

It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in two pairs of optical interfaces. The model
supports transmission of PCM frames, while has no port for MIDi messages.

The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.

This commit adds support for it. The 896 mk3 FireWire is just tested, but
the 896 mk3 Hybrid is not yet.

$ config-rom-pretty-printer < motu-896mk3fw.img
               ROM header and bus information block
               -----------------------------------------------------------------
1024  04100ce1  bus_info_length 4, crc_length 16, crc 3297
1028  31333934  bus_name "1394"
1032  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
1036  0001f200  company_id 0001f2     |
1040  00093add  device_id 0000604893  | EUI-64 0547556791237341

               root directory
               -----------------------------------------------------------------
1044  0004ef04  directory_length 4, crc 61188
1048  030001f2  vendor
1052  0c0083c0  node capabilities: per IEEE 1394
1056  d1000002  --> unit directory at 1064
1060  8d000005  --> eui-64 leaf at 1080

               unit directory at 1064
               -----------------------------------------------------------------
1064  0003998d  directory_length 3, crc 39309
1068  120001f2  specifier id
1072  13000017  version
1076  17101800  model

               eui-64 leaf at 1080
               -----------------------------------------------------------------
1080  0002cc82  leaf_length 2, crc 52354
1084  0001f200  company_id 0001f2     |
1088  00093add  device_id 0000604893  | EUI-64 0547556791237341

$ config-rom-pretty-printer < motu-896mk3hybrid.img
               ROM header and bus information block
               -----------------------------------------------------------------
1024  04103cbe  bus_info_length 4, crc_length 16, crc 15550
1028  31333934  bus_name "1394"
1032  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
1036  0001f200  company_id 0001f2     |
1040  000ae601  device_id 0000714241  | EUI-64 0547556791346689

               root directory
               -----------------------------------------------------------------
1044  0004ef04  directory_length 4, crc 61188
1048  030001f2  vendor
1052  0c0083c0  node capabilities: per IEEE 1394
1056  d1000002  --> unit directory at 1064
1060  8d000005  --> eui-64 leaf at 1080

               unit directory at 1064
               -----------------------------------------------------------------
1064  000394ac  directory_length 3, crc 38060
1068  120001f2  specifier id
1072  13000037  version
1076  17102800  model

               eui-64 leaf at 1080
               -----------------------------------------------------------------
1080  0002cf69  leaf_length 2, crc 53097
1084  0001f200  company_id 0001f2     |
1088  000ae601  device_id 0000714241  | EUI-64 0547556791346689

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240129022711.254383-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29 09:04:30 +01:00
Hans Verkuil
c8282f7b85 Linux 6.8-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmW2+NgeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNMoH/RbwRC7SpkT55lsD
 lIpaUrIYLuXkPKJa/3eD75cOtOv4Yi+aHGXfdTbo+JwWBKg4zY8X2pr7IZrvfpp5
 TZD+PADQtFAReWlQtVsaNM7om8k+2ltm+nkso1G+FpHljqqHgl3gc95UrVlmM70r
 iEScR0KbHkJ2Yv5H8C6ardcA87JYMaex6USK9GWSoylBN3R+Z49YEC9q07IQatAA
 Do8i6jDtw3O9OF2PpnhIPXxQZkwsn15pY1HwZxUEDMPXteMZa6NogvFsj6kSIudo
 YTF3FK+oX5CXNATL49OY4ibJ701mPCKqsuY3z6SuoYtvhI6wR96sIGFjEWV9tHvU
 VhPBvCI=
 =BKso
 -----END PGP SIGNATURE-----

Merge tag 'v6.8-rc2'

Linux 6.8-rc2

The vb2 fixes from v6.8-rc2 are needed for the work on the new
vb2 delete buffers feature.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-01-29 08:59:23 +01:00
Mohammad Rahimi
ec4d82f855 thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
The bit 23, CM TBT3 Not Supported (CNS), in ROUTER_CS_5 indicates
whether a USB4 Connection Manager is TBT3-Compatible and should be:
    0b for TBT3-Compatible
    1b for Not TBT3-Compatible

Fixes: b04079837b ("thunderbolt: Add initial support for USB4")
Cc: stable@vger.kernel.org
Signed-off-by: Mohammad Rahimi <rahimi.mhmmd@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-01-29 09:48:40 +02:00
Konstantin Komarov
d68968440b
fs/ntfs3: Update inode->i_size after success write into compressed file
Reported-by: Giovanni Santini <giovannisantini93@yahoo.it>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 10:48:35 +03:00
Konstantin Komarov
652cfeb43d
fs/ntfs3: Fixed overflow check in mi_enum_attr()
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 10:48:34 +03:00
Konstantin Komarov
1b7dd28e14
fs/ntfs3: Correct function is_rst_area_valid
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 10:48:34 +03:00
Konstantin Komarov
4fd6c08a16
fs/ntfs3: Use i_size_read and i_size_write
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 10:48:33 +03:00
Konstantin Komarov
5ca87d01eb
fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
It used in test environment.

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 10:48:33 +03:00
Ism Hong
d6d33f03ba
fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
Since the buffer cache for ntfs3 metadata is not released until the file
system is unmounted, allocating from the movable zone may result in cma
allocation failures. This is due to the page still being used by ntfs3,
leading to migration failures.

To address this, this commit use sb_bread_umovable() instead of
sb_bread(). This change prevents allocation from the movable zone,
ensuring compatibility with scenarios where the buffer head is not
released until unmount. This patch is inspired by commit
a8ac900b8163("ext4: use non-movable memory for the ext4 superblock").

The issue is found when playing video files stored in NTFS on the
Android TV platform. During this process, the media parser reads the
video file, causing ntfs3 to allocate buffer cache from the CMA area.
Subsequently, the hardware decoder attempts to allocate memory from the
same CMA area. However, the page is still in use by ntfs3, resulting in
a migrate failure in alloc_contig_range().

The pinned page and allocating stacktrace reported by page owner shows
below:

page:ffffffff00b68880 refcount:3 mapcount:0 mapping:ffffff80046aa828
        index:0xc0040 pfn:0x20fa4
    aops:def_blk_aops ino:0
    flags: 0x2020(active|private)
    page dumped because: migration failure
    page last allocated via order 0, migratetype Movable,
        gfp_mask 0x108c48
        (GFP_NOFS|__GFP_NOFAIL|__GFP_HARDWALL|__GFP_MOVABLE),
    page_owner tracks the page as allocated
     prep_new_page
     get_page_from_freelist
     __alloc_pages_nodemask
     pagecache_get_page
     __getblk_gfp
     __bread_gfp
     ntfs_read_run_nb
     ntfs_read_bh
     mi_read
     ntfs_iget5
     dir_search_u
     ntfs_lookup
     __lookup_slow
     lookup_slow
     walk_component
     path_lookupat

Signed-off-by: Ism Hong <ism.hong@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2024-01-29 10:48:33 +03:00
Nícolas F. R. A. Prado
eaffb10b51 cpufreq: mediatek-hw: Don't error out if supply is not found
devm_regulator_get_optional() returns -ENODEV if no supply can be found.
By introducing its usage, commit 788715b5f2 ("cpufreq: mediatek-hw:
Wait for CPU supplies before probing") caused the driver to fail probe
if no supply was present in any of the CPU DT nodes.

Use devm_regulator_get() instead since the CPUs do require supplies
even if not described in the DT. It will gracefully return a dummy
regulator if none is found in the DT node, allowing probe to succeed.

Fixes: 788715b5f2 ("cpufreq: mediatek-hw: Wait for CPU supplies before probing")
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/case/id/65b0b169710edea22852a3fa/
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-01-29 10:34:17 +05:30
Jens Axboe
c79f52f065 io_uring/rw: ensure poll based multishot read retries appropriately
io_read_mshot() always relies on poll triggering retries, and this works
fine as long as we do a retry per size of the buffer being read. The
buffer size is given by the size of the buffer(s) in the given buffer
group ID.

But if we're reading less than what is available, then we don't always
get to read everything that is available. For example, if the buffers
available are 32 bytes and we have 64 bytes to read, then we'll
correctly read the first 32 bytes and then wait for another poll trigger
before we attempt the next read. This next poll trigger may never
happen, in which case we just sit forever and never make progress, or it
may trigger at some point in the future, and now we're just delivering
the available data much later than we should have.

io_read_mshot() could do retries itself, but that is wasteful as we'll
be going through all of __io_read() again, and most likely in vain.
Rather than do that, bump our poll reference count and have
io_poll_check_events() do one more loop and check with vfs_poll() if we
have more data to read. If we do, io_read_mshot() will get invoked again
directly and we'll read the next chunk.

io_poll_multishot_retry() must only get called from inside
io_poll_issue(), which is our multishot retry handler, as we know we
already "own" the request at this point.

Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/1041
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-28 20:37:11 -07:00
Guoyu Ou
6bb3f7f4c3 bcachefs: unlock parent dir if entry is not found in subvolume deletion
Parent dir is locked by user_path_locked_at() before validating the
required dentry. It should be unlocked if we can not perform the
deletion.

This fixes the problem:

$ bcachefs subvolume delete not-exist-entry
BCH_IOCTL_SUBVOLUME_DESTROY ioctl error: No such file or directory
$ bcachefs subvolume delete not-exist-entry

the second will stuck because the parent dir is locked in the previous
deletion.

Signed-off-by: Guoyu Ou <benogy@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-28 21:41:09 -05:00
Helge Deller
eba38cc757 bcachefs: Fix build on parisc by avoiding __multi3()
The gcc compiler on paric does support the __int128 type, although the
architecture does not have native 128-bit support.

The effect is, that the bcachefs u128_square() function will pull in the
libgcc __multi3() helper, which breaks the kernel build when bcachefs is
built as module since this function isn't currently exported in
arch/parisc/kernel/parisc_ksyms.c.
The build failure can be seen in the latest debian kernel build at:
https://buildd.debian.org/status/fetch.php?pkg=linux&arch=hppa&ver=6.7.1-1%7Eexp1&stamp=1706132569&raw=0

We prefer to not export that symbol, so fall back to the optional 64-bit
implementation provided by bcachefs and thus avoid usage of __multi3().

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-28 21:29:23 -05:00
Linus Torvalds
41bccc98fb Linux 6.8-rc2 v6.8-rc2 2024-01-28 17:01:12 -08:00
Hsiao Chien Sung
b82a2a4b85 drm/mediatek: Support MT8188 VDOSYS1 in display driver
- The mmsys_dev_num in MT8188 VDOSYS0 was set to 1 since
  VDOSYS1 was not available before. Increase it to support
  VDOSYS1 in display driver.
- Add compatible name for MT8188 VDOSYS1
  (shares the same driver data with MT8195 VDOSYS1)

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-24-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-01-29 00:30:06 +00:00
Hsiao Chien Sung
15ef04e2b6 drm/mediatek: Add Padding to OVL adaptor
Add MT8188 Padding to OVL adaptor to probe the driver.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-20-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-01-29 00:27:42 +00:00
Linus Torvalds
3eb5ca857d cxl fixes for 6.8-rc2
- Fix unit test build regression fallout from global
   "missing-prototypes" change
 
 - Fix compatibility with devices that do not support interrupts
 
 - Fix overflow when calculating the capacity of large interleave sets
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZbahQwAKCRDfioYZHlFs
 Z1VNAP0dz0rhIriILaAvRidYQWt/qtmhoaZswrVvEtY+q/orogD/d6eHChpRQKM2
 Bg8ofjqLkaEEszx7VBVhOGodgaQnBA8=
 =RUzU
 -----END PGP SIGNATURE-----

Merge tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull cxl fixes from Dan Williams:
 "A build regression fix, a device compatibility fix, and an original
  bug preventing creation of large (16 device) interleave sets:

   - Fix unit test build regression fallout from global
     "missing-prototypes" change

   - Fix compatibility with devices that do not support interrupts

   - Fix overflow when calculating the capacity of large interleave sets"

* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/region:Fix overflow issue in alloc_hpa()
  cxl/pci: Skip irq features if MSI/MSI-X are not supported
  tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
  tools/testing/cxl: Disable "missing prototypes / declarations" warnings
2024-01-28 13:55:56 -08:00
Linus Torvalds
29142dc92c tracefs: remove stale 'update_gid' code
The 'eventfs_update_gid()' function is no longer called, so remove it
(and the helper function it uses).

Link: https://lore.kernel.org/all/CAHk-=wj+DsZZ=2iTUkJ-Nojs9fjYMvPs1NuoM3yK7aTDtJfPYQ@mail.gmail.com/

Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-01-28 15:30:36 -05:00
Alice Ryhl
f090f0d0ee rust: sync: update integer types in CondVar
Reduce the chances of compilation failures due to integer type
mismatches in `CondVar`.

When an integer is defined using a #define in C, bindgen doesn't know
which integer type it is supposed to be, so it will just use `u32` by
default (if it fits in an u32). Whenever the right type is something
else, we insert a cast in Rust. However, this means that the code has a
lot of extra casts, and sometimes the code will be missing casts if u32
happens to be correct on the developer's machine, even though the type
might be something else on a different platform.

This patch updates all uses of such constants in
`rust/kernel/sync/condvar.rs` to use constants defined with the right
type. This allows us to remove various unnecessary casts, while also
future-proofing for the case where `unsigned int != u32` (even though
that is unlikely to ever happen in the kernel).

I wrote this patch at the suggestion of Benno in [1].

Link: https://lore.kernel.org/all/nAEg-6vbtX72ZY3oirDhrSEf06TBWmMiTt73EklMzEAzN4FD4mF3TPEyAOxBZgZtjzoiaBYtYr3s8sa9wp1uYH9vEWRf2M-Lf4I0BY9rAgk=@proton.me/ [1]
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-4-88e0c871cc05@google.com
[ Added note on the unlikeliness of `sizeof(int)` changing. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-01-28 20:55:28 +01:00
Alice Ryhl
e7b9b1ff1d rust: sync: add CondVar::wait_timeout
Sleep on a condition variable with a timeout.

This is used by Rust Binder for process freezing. There, we want to
sleep until the freeze operation completes, but we want to be able to
abort the process freezing if it doesn't complete within some timeout.

Note that it is not enough to avoid jiffies by introducing a variant of
`CondVar::wait_timeout` that takes the timeout in msecs because we need
to be able to restart the sleep with the remaining sleep duration if it
is interrupted, and if the API takes msecs rather than jiffies, then
that would require a conversion roundtrip jiffies->msecs->jiffies that
is best avoided.

Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-3-88e0c871cc05@google.com
[ Added `CondVarTimeoutResult` re-export and fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-01-28 20:54:35 +01:00
Alice Ryhl
82e1708748 rust: time: add msecs to jiffies conversion
Defines type aliases and conversions for msecs and jiffies.

This is used by Rust Binder for process freezing. There, we want to
sleep until the freeze operation completes, but we want to be able to
abort the process freezing if it doesn't complete within some timeout.
The freeze timeout is supplied in msecs.

Note that we need to convert to jiffies in Binder. It is not enough to
introduce a variant of `CondVar::wait_timeout` that takes the timeout in
msecs because we need to be able to restart the sleep with the remaining
sleep duration if it is interrupted, and if the API takes msecs rather
than jiffies, then that would require a conversion roundtrip jiffies->
msecs->jiffies that is best avoided.

Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-2-88e0c871cc05@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-01-28 19:50:48 +01:00
Alice Ryhl
3e6454177f rust: sync: add CondVar::notify_sync
Wake up another thread synchronously.

This method behaves like `notify_one`, except that it hints to the
scheduler that the current thread is about to go to sleep, so it should
schedule the target thread on the same CPU.

This is used by Rust Binder as a performance optimization. When sending
a transaction to a different process, we usually know which thread will
handle it, so we can schedule that thread for execution next on this
CPU for better cache locality.

Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-1-88e0c871cc05@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-01-28 19:50:35 +01:00
Linus Torvalds
4854cf9c61 - fix for boot issue on single core Lantiq Danube devices
- fix for boot issue on Loongson64 platforms
 - fix for improper FPU setup
 - fix missing prototypes issues
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmW2VbEaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDeSw/8DYQJnpUogDZXBhDaxNUE
 ovVjz+7cqXB7kQJvJbqht66TWCdJp9MMFp8v5SHlQZhSwysiobroomMQHIkWcP6i
 TXMsDTEGlWTj3Gie8/bsV9FMpTI7tlC9A8o7FwAj1DOUNL0MBU8aq2/rQJ+/KKD7
 dXpwCsXRn0rnit/1INEc7wBX3OBISwkV2mkYnFQiYI8zzs96YNcMxHTlicuIYnhj
 OKCJL6lE+ntnlKdBFoSWSqbIPh2MTpCg+nOcc+NIltDiEOK14mVxAAgoh8XHI9HD
 Zevxno79GYTadFHE5YthxrzQL+PU1tsoHR/ykRvJS6JkbgFY+Tqinax6Z/Eiy1L9
 u+XYkRjdGKvyB7VXdaarVd1MT8KESIXOoXs2Ohv+7KDZjtR1BUVEV5db4eY3cBhd
 5BfcDXe16SLbdZ3uP3WRua46H1kemjIfVw9ypC7NPWtyPbyGbJ37vGpl/umVgvfz
 Rj0gujnhnl50Dzf5ACX+DSCjuaMQ6+3XUqDR8uOciwhlH+JDl6JmkpEkraBfjigv
 pdZ8zAkPztIXbMt0cQ3W6Xd/+ZNHeyFRo9Y9tt7HrhkJyvoNeDXZebR8wFYhw2iN
 UauVP+BtOehozdgQgQw8F1EJfS4T8EbBcpUST/qbtbMLJAgQWSPxuZkHnQ/yOoti
 m7kCVyBAx+/PFIV+QDLqBpo=
 =ZSEK
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix boot issue on single core Lantiq Danube devices

 - fix boot issue on Loongson64 platforms

 - fix improper FPU setup

 - fix missing prototypes issues

* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
  MIPS: loongson64: set nid for reserved memblock region
  Revert "MIPS: loongson64: set nid for reserved memblock region"
  MIPS: lantiq: register smp_ops on non-smp platforms
  MIPS: loongson64: set nid for reserved memblock region
  MIPS: reserve exception vector space ONLY ONCE
  MIPS: BCM63XX: Fix missing prototypes
  MIPS: sgi-ip32: Fix missing prototypes
  MIPS: sgi-ip30: Fix missing prototypes
  MIPS: fw arc: Fix missing prototypes
  MIPS: sgi-ip27: Fix missing prototypes
  MIPS: Alchemy: Fix missing prototypes
  MIPS: Cobalt: Fix missing prototypes
2024-01-28 10:43:06 -08:00
Linus Torvalds
648f575d5e - Prevent an inconsistent futex operation leading to stale state
exposure
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmW2LAgACgkQEsHwGGHe
 VUqowBAAiW9aPQmp401DSXLX+bX0oS5IQVEZnAEE3hQTWxdvDoIdmX+SBReSutXy
 PDm8mZgVtIiUg3V5bu7/9Dgpu7ovRuChJPjjkYFUDcEmzmsMI11W6u8+8eyt8yRd
 X9LuGUeXPJSI1kadYudhFUhl6X6KcXj4Y+XUqNcyp8yClSEcLriYeiumNApSEzj6
 BneO5VBbXTpJq1b7GOlC4MNhNXhx+WlUdJUb3VPLlxy/akxrNs9x0ASdOuqslCq8
 X9SJPnKeRh0mpezmWDgU72eQ/3vpvWQzwyXvp2pQGbjArCx7IwwD765NDu0P6651
 C/+4ruXmcd+Jp3wuobdHG8/J2NlZQy8tZQm284YkS5vyBQDi4s17hycXw/aeUFpu
 /3LR1Hppl//u7hkaHszE8vE5l6in4a2XAbk9EozChVj/aHRJqIaLn8TGQRquK4Tg
 uRjIC3O2ubJCsIlNIczysjCobSCO+cELwUuFVHh7cdmQAgUwF3efDab0+pJ7MHFb
 ZEcqQbIt4FGea4BGzvRYCYj6W9bkhzttnH+68ef+mDA3BcdGoYnHcQ143M8duNhe
 0inWCibQXMFC9EGPjC8Sz8WvzF/L5KL9bPQmO1sitIzH6kbU3o7PBk2Fe4V6+KP9
 THK865SJ/9QirjXrGmp9Sle6dqJRUylmt1ts8reOWACZ98LKeWU=
 =ibuM
 -----END PGP SIGNATURE-----

Merge tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fix from Borislav Petkov:

 - Prevent an inconsistent futex operation leading to stale state
   exposure

* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Prevent the reuse of stale pi_state
2024-01-28 10:38:16 -08:00
Linus Torvalds
0e4363ac1a - Initialize the resend node of each IRQ descriptor, not only the first one
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmW2KrEACgkQEsHwGGHe
 VUr1WA//Qsi2JkxO1lyUQgnyuXqs0+oVZJxFyH2dFYzWkfSaxgsyPZ0H+wsweDfP
 OgoNzwwDf1IaNbVz2voV6lSM/30ujJMx4aAucT5WTEXa12cJsvipxRiNd8WU8GqQ
 buBz+vnS9IJ2WfM7UxhIVevYFU8H/ERcSO9WCII0YjlcVxmlwMK3B7kFdpBPdT5Q
 m5hvBorZzIa9wD3TI7e+VvEVbCx0WjsYYEpXDXM/yCf1Juc9952pjjunzx3YmJES
 5JG2WpnEvmNdWwIPO0NAjs7Shw/MNViXTy5Ls5jcbswiAcBoUxNHQlUsvNVDaVyv
 8eMCkPzuSipY8HSoetQSTJl+mr3LyYRvevKahuTgwbS8K+kxgClqHFoLZVqolWnk
 2IDo63R6Ex6lb1Xpb/Rpg/4j4NqUVWcvPHf6Z2CmMRq/XbSk2DIFl1Wxjgy/Cjnu
 +nNLw2FYayEBrKF3VlYgERGoCfBrEsksxzljjeHFn5XWr+G2x1ykF37xaWjQ2+oV
 sFl6UYwIsdqPCjHmpT6R1lwCdeEC3o3Zc2Kf5uEVj+pXacKJkxZU0L6ZneO8UiEc
 rtc0gTgm9ZNd8oDsjsaBU1A3KxH9lOfVz82ZV0tipz94dcN4zrB9Qag0Yw+64YOC
 cQ9cRKiFiCVCeD1ksDLZe1IUX++T2Y9O8MZv06ZDrbaFC56+lU8=
 =IgON
 -----END PGP SIGNATURE-----

Merge tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fix from Borislav Petkov:

 - Initialize the resend node of each IRQ descriptor, not only the first
   one

* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Initialize resend_node hlist for all interrupt descriptors
2024-01-28 10:34:55 -08:00
Linus Torvalds
90db544eba - Preserve the number of idle calls and sleep entries across CPU hotplug
events in order to be able to compute correct averages
 
 - Limit the duration of the clocksource watchdog checking interval as
   too long intervals lead to wrongly marking the TSC as unstable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmW2KYEACgkQEsHwGGHe
 VUoX7w//Ulls1tp3m1oiejTBtUmkewSmnhNAfkHJv3MlKNe+ttG6LvQVh9g2bf1Z
 FOu2M2se0ge8G5xf3+I5E4rpqlJZSuhPmNmIET+aj+2a61UJq/6zE1Zw6mxjrJOK
 emjOYKTxZ/HxvKJJGO6NiH8Iv5Aj3nQR3Y6oyb/FyP5TLJ6MCT21iEaqyqU7P+Ix
 AHIS3cL97M5R/tFtP2CY3PV2M6hJ0lqapSi9t75hT8DfJN1TNQ5SvFkKgmOIrGFw
 2WxPTSTEZAnXlvI4cC3Nru9i64QQRw9S05FFelX2pwxE/7wVzBvfh8cjuGZJBve/
 KQhNnQ4/fzv6E/hUcavKuOyk1lx5XonfCuG4RFoLl67LjLbLh+Q55RBdXflBPF4T
 Ow9BSyQNFu391C2Bl5gJUYVd2JMv+IVpi2wUiwrXJ/Mxj+A2J7Fj0jz7hMbNCmsU
 EaA+QyfkAGsoa99xP3UDhPzxoCr2s5YTAxH+IUeSWeI25PMq9f+6fifXBwG+GaVa
 FS6Ei1VI0GCNmcYFYawHJbdM2ui5h7lZ96aEpOBSVcAv/2yBNgqxuYZ+icO/wI6N
 JM0DSEEOrWcytfxftl7LmglJauhXSKZH4UTG4RCz0IkDgR72Wn0QF4cqm4wWQ5yh
 n5/xO+SbkzE57bltsnAkvpu0a110fdK5ec+vkFIy4PrxyO83XhY=
 =9RXx
 -----END PGP SIGNATURE-----

Merge tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fixes from Borislav Petkov:

 - Preserve the number of idle calls and sleep entries across CPU
   hotplug events in order to be able to compute correct averages

 - Limit the duration of the clocksource watchdog checking interval as
   too long intervals lead to wrongly marking the TSC as unstable

* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/sched: Preserve number of idle sleeps across CPU hotplug events
  clocksource: Skip watchdog check for large watchdog intervals
2024-01-28 10:33:14 -08:00
Luca Weiss
410dd97e3f arm64: dts: qcom: sm7225-fairphone-fp4: Switch firmware ext to .mbn
Specify the file name for the squashed/non-split firmware with the .mbn
extension instead of the split .mdt. The kernel can load both but the
squashed version is preferred in dts nowadays.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240110-fp4-mbn-v1-1-45e7e33b1834@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-28 12:04:00 -06:00