The ITE IT5202 is a USB Type-C Alternate Mode Passive MUX, used for
muxing the SBU lines of a Type-C port with DisplayPort altmode and
also providing an orientation switch.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240122110446.140226-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a binding for the ITE IT5205 Alternate Mode Passive MUX,
used for connecting, disconnecting and switching orientation and
control the SBU signals for alternate modes on USB Type-C ports.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240122110446.140226-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In sddr55_{read|write}_data(), the address variables are needlessly typed
as *unsigned long* -- which is 32-bit type on the 32-bit arches and 64-bit
type on the 64-bit arches; those variables' value should fit into just 3
command bytes and consists of 10-bit block # (or at least the max block #
seems to be 1023) and 4-/5-bit page # within a block, so 32-bit *unsigned*
*int* type should be more than enough...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[Sergey: rewrote the patch subject/description]
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/4c9485f2-0bfc-591b-bfe7-2059289b554e@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM core now gives us a primitive that does not touch
the counter in an error case. Use it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240118202300.1616-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When write UDC to empty and unbind gadget driver from gadget device, it is
possible that there are many queue failures for mass storage function.
The root cause is mass storage main thread alaways try to queue request to
receive a command from host if running flag is on, on platform like dwc3,
if pull down called, it will not queue request again and return
-ESHUTDOWN, but it not affect running flag of mass storage function.
Check return code from mass storage function and clear running flag if it
is -ESHUTDOWN, also indicate start in/out transfer failure to break loops.
Cc: stable <stable@kernel.org>
Signed-off-by: yuan linyu <yuanlinyu@hihonor.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240123034829.3848409-1-yuanlinyu@hihonor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OTG 1.3 spec has the feature A_ALT_HNP_SUPPORT, which tells
a device that it is connected to the wrong port. Some devices
refuse to operate if you enable that feature, because it indicates
to them that they ought to request to be connected to another port.
According to the spec this feature may be used based only the following
three conditions:
6.5.3 a_alt_hnp_support
Setting this feature indicates to the B-device that it is connected to
an A-device port that is not capable of HNP, but that the A-device does
have an alternate port that is capable of HNP.
The A-device is required to set this feature under the following conditions:
• the A-device has multiple receptacles
• the A-device port that connects to the B-device does not support HNP
• the A-device has another port that does support HNP
A check for the third and first condition is missing. Add it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Fixes: 7d2d641c44 ("usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 device")
Link: https://lore.kernel.org/r/20240122153545.12284-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When power is recycled in usb controller during system power management,
the controller will recognize it and switch role if role has been changed
during power lost. In current design, it will be completed in resume()
function. However, this may bring issues since usb class devices have
their pm operations too and these device's resume() functions are still
not being called at this point. When usb controller recognized host role
should be stopped, these usb class devices will be removed at this point.
But these usb class devices can't be removed in some cases, such as scsi
devices. Since scsi driver may sync data to U-disk, however it will block
there because scsi drvier can only handle pm request when is in suspended
state. Therefore, there may exist a dependency between ci_resume() and usb
class device's resume(). To break this potential dependency, we need to
handle power lost work in a workqueue.
Fixes: 74494b3321 ("usb: chipidea: core: add controller resume support when controller is powered off")
cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240119123537.3614838-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current scenario if Plug-out and Plug-In performed continuously
there could be a chance while checking for dwc->gadget_driver in
dwc3_gadget_suspend, a NULL pointer dereference may occur.
Call Stack:
CPU1: CPU2:
gadget_unbind_driver dwc3_suspend_common
dwc3_gadget_stop dwc3_gadget_suspend
dwc3_disconnect_gadget
CPU1 basically clears the variable and CPU2 checks the variable.
Consider CPU1 is running and right before gadget_driver is cleared
and in parallel CPU2 executes dwc3_gadget_suspend where it finds
dwc->gadget_driver which is not NULL and resumes execution and then
CPU1 completes execution. CPU2 executes dwc3_disconnect_gadget where
it checks dwc->gadget_driver is already NULL because of which the
NULL pointer deference occur.
Cc: stable@vger.kernel.org
Fixes: 9772b47a4c ("usb: dwc3: gadget: Fix suspend/resume during device mode")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Link: https://lore.kernel.org/r/20240119094825.26530-1-quic_uaggarwa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the function update_port_device_state gets the usb_hub from
udev->parent by calling usb_hub_to_struct_hub.
However, in case the actconfig or the maxchild is 0, the usb_hub would
be NULL and upon further accessing to get port_dev would result in null
pointer dereference.
Fix this by introducing an if check after the usb_hub is populated.
Fixes: 83cb2604f6 ("usb: core: add sysfs entry for usb device state")
Cc: stable@vger.kernel.org
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240110095814.7626-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Regular expression used to match the unit address part should not allow
non-hex numbers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123083511.21063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.
The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.
Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.
Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last TRB of a isoc TD might not trigger an event if there was
an error event for a TRB mid TD. This is seen on a NEC Corporation
uPD720200 USB 3.0 Host
After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1
generate events for passed TRBs with IOC flag set if it proceeds to the
next TD. This event is either a copy of the original error, or a
"success" transfer event.
If that event is missing then the driver and xHC host get out of sync as
the driver is still expecting a transfer event for that first TD, while
xHC host is already sending events for the next TD in the list.
This leads to
"Transfer event TRB DMA ptr not part of current TD" messages.
As a solution we tag the isoc TDs that get error events mid TD.
If an event doesn't match the first TD, then check if the tag is
set, and event points to the next TD.
In that case give back the fist TD and process the next TD normally
Make sure TD status and transferred length stay valid in both cases
with and without final TD completion event.
Reported-by: Michał Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20240112235205.1259f60c@foxbook/
Tested-by: Michał Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sanity check of interrupter index when adding a new interrupter is
off by one. intr_num needs to be smaller than xhci->max_interrupter to
fit the array of interrupters.
Luckily this doesn't cause any real word harm as xhci_add_interrupter()
is always called with a intr_num value smaller than xhci->max_interrupters
in any current kernel.
Should not be needed for stable as 6.7 kernel and older only supports
one interrupter, with intr_num always being zero.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/e9771296-586d-456a-ac24-a82de79bb2e6@moroto.mountain/
Fixes: 4bf398e15a ("xhci: split allocate interrupter into separate alloacte and add parts")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240125152737.2983959-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent commit [1] added support for changing max segment size of the NCM
interface via configfs. But the value of segment size value stored in
ncm_opts need to be converted to little endian before saving it in
ecm_desc. Also while initialising the value of segment size in opts during
instance allocation, the value ETH_FRAME_LEN needs to be assigned directly
without any conversion as ETH_FRAME_LEN and the variable max_segment_size
are native endian. The current implementaion modifies it into little endian
thus breaking things for big endian targets.
Fix endianness while assigning these variables.
While at it, fix up some stray spaces in comments added in code.
[1]: https://lore.kernel.org/all/20231221153216.18657-1-quic_kriskura@quicinc.com/
Fixes: 1900daeefd ("usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240118154910.8765-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit bac1ec5514 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. Currently this quirk can only be set using
xhci private data. But there are some drivers like dwc3/host.c
which adds adds quirks using software node for xhci device.
Hence set this xhci quirk by iterating over device properties.
Cc: stable@vger.kernel.org # 5.11
Fixes: bac1ec5514 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit bac1ec5514 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.
We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci device property since its needed for DWC3 controller.
In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR.
Cc: stable@vger.kernel.org #5.11
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240119181909.7079-1-erick.archer@gmx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add new emmc groups in the pinctrl driver for the
MediaTek MT7981 SoC:
* emmc reset, with pin 15.
* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25.
* emmc 8-bit bus-width, with pins 16 to 25.
The existing emmc_45 group is kept for legacy reasons, even
if this is the union of emmc_reset and emmc_8 groups.
Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117145547.3354242-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add uart1_3 (pins 26, 27) group to the pinctrl driver for the
MediaTek MT7981 SoC.
Signed-off-by: Jean Thomas <jean.thomas@wifirst.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240117124234.3137050-1-jean.thomas@wifirst.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix kernel-doc warnings for enum (anonymous): the enum values are not
documented, so don't indicate that the comment contains kernel-doc
notation.
pinctrl-mt7986.c:68: warning: Enum value 'GPIO_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_RB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LT_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_LB_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TR_BASE' not described in enum '(anonymous)'
pinctrl-mt7986.c:68: warning: Enum value 'IOCFG_TL_BASE' not described in enum '(anonymous)'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312110210.x3vxq42A-lkp@intel.com/
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-gpio@vger.kernel.org>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lore.kernel.org/r/20240111045126.13768-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document the new following device tree bindings used in their
device trees:
- samsung,fortuna3g
- samsung,gprimeltecan
- samsung,grandprimelte
- samsung,rossa
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240120095715.13689-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to lack of documentation the AMIC4 and AMIC5 analogue microphones
were never actually working, so the audio routing for them was added
hoping it is correct. It turned out not correct - their routing should
point to SWR_INPUT0 (so audio mixer TX SMIC MUX0 = SWR_MIC0) and
SWR_INPUT1 (so audio mixer TX SMIC MUX0 = SWR_MIC1), respectively. With
proper mixer settings and fixed LPASS TX macr codec TX SMIC MUXn
widgets, this makes all microphones working on HDK8450.
Cc: stable@vger.kernel.org
Fixes: f20cf2bc3f ("arm64: dts: qcom: sm8450-hdk: add other analogue microphones")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124121855.162730-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-12-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, unify the naming scheme of the
thermal zones across the tree while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-11-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-10-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-9-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-8-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-7-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If the GPU ever reaches this temperature, the "critical" signal shuold
definitely be propagated. Fix the wrong type.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-6-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-5-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-4-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-3-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-2-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-1-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The RPMh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being committed.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-4-70723e08d5f6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Previous Qualcomm SoCs over the past couple years have used the Arm DSU
architecture, which basically unified the meaning of the "cluster" and
"system". This is however clearly not the case on X1E, as can be seen
by three separate cluster power domains.
Add the lacking system-level power domain. For now it's going to be
always-on, as no system-wide idle states are defined at the moment.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-3-70723e08d5f6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "qcom,rpm-msg-ram" is
the former and needs to constrain each entry to a single phandle value.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190744.1554625-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Return pinctrl_gpio_direction_output() in order to transfer the error
if it fails.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240103085058.3771653-1-nichen@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For qcs404 and ipq5332, certain interrupts are missing in DT.
Add them to ensure they are in accordance to bindings.
The interrupts added enable remote wakeup functionality for these SoCs.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For sm6350/sdm670/sdm845, although they are qusb2 phy targets, dp/dm
interrupts are used for wakeup instead of qusb2_phy irq. These targets
were part of a generation that were the last ones to implement QUSB2 PHY
and the design incorporated dedicated DP/DM interrupts which eventually
carried forward to the newer femto based targets.
Add the missing pwr_event irq for these targets. Also modify order of
interrupts in accordance to bindings update. Modifying the order of these
interrupts is harmless as the driver tries to get these interrupts from DT
by name and not by index.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On non-QUSB2 targets (like the ones that use femto phys, M31 phy, eusb2
phy), many of the QCOM DTs are missing the IRQ for either hs_phy_irq or
pwr_event. In one case, the hs_phy_irq was incorrectly defined with the
latter's IRQ number. Since the DT must describe the hw whether or not
the driver uses these interrupts, fix and add the missing entries in order
to describe the HW completely and accurately.
Also modify order of interrupts in accordance to bindings update.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On several QUSB2 Targets, the hs_phy_irq mentioned is actually
qusb2_phy interrupt specific to QUSB2 PHY's. Rename hs_phy_irq
to qusb2_phy for such targets.
In actuality, the hs_phy_irq is also present in these targets, but
kept in for debug purposes in hw test environments. This is not
triggered by default and its functionality is mutually exclusive
to that of qusb2_phy interrupt.
Add missing hs_phy_irq's, pwr_event irq's for QUSB2 PHY targets.
Add missing ss_phy_irq on some targets which allows for remote
wakeup to work on a Super Speed link.
Also modify order of interrupts in accordance to bindings update.
Since driver looks up for interrupts by name and not by index, it
is safe to modify order of these interrupts in the DT.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20240125185921.5062-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As events are deduplicated by name, ensure PMU prefixes are always
used in metrics. Previously they may be missed on the first event in a
formula.
Update metric constraints for architectures with topdown l2 events.
Conversion script updated in:
https://github.com/intel/perfmon/pull/128
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZZam-EG-UepcXtWw@kernel.org/
Link: https://lore.kernel.org/r/20240104231903.775717-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>