Commit graph

1,264,895 commits

Author SHA1 Message Date
Johannes Berg
47cde09429 wifi: iwlwifi: make TB reallocation a debug message
There's no need to print this, it's a known issue and
the workaround works just fine. Make the reallocation
message just a debug message.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.329d5f2ee7f7.I0bfc6dde17fe2c738129f3aba746c6cba57589f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:47:33 +01:00
Mukesh Sisodiya
099a47dbe7 wifi: iwlwifi: Add support for new 802.11be device
Add support for the new 802.11be device with limites capabilities:
- 320 MHz isn't supported
- MCSs 12 and 13 are not supported

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.8529bd2acedf.I25dccb7bbeb21b8df2123fad51dde7fcf137a508@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:47:25 +01:00
Johannes Berg
cf74ce02e3 wifi: iwlwifi: add kunit test for devinfo ordering
We used to have a test built into the code for this internally,
but now we can put that into kunit and let everyone run it, to
verify the devinfo table ordering if it's changed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.a4a8af7c091f.I0fb09083317b331168b99b8db39656a126a5cc4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:47:11 +01:00
Michael-CY Lee
d60277ac3f wifi: mac80211: apply duration for SW scan
This patch makes duration in scan request be applicable when using
SW scan, but only accepts durations greater than the default value for
the following reasons:
1. Most APs have a beacoon interval of 100ms.
2. Sending and receiving probe require some delay.
3. Setting channel to HW also requires some delays

Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://msgid.link/20240123054752.22833-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:40:42 +01:00
Benjamin Berg
e10322810c wifi: mac80211: use deflink and fix typo in link ID check
This does not change anything effectively, but it is closer to what the
code is trying to achieve here. i.e. select the link data if it is an
MLD and fall back to using the deflink otherwise.

Fixes: 0f99f08783 ("wifi: mac80211: Print local link address during authentication")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.4c4b1c40eb3c.I2771621dee328c618536596b7e56232df42a79c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:50 +01:00
Johannes Berg
bc8a0fac86 wifi: mac80211: don't set bss_conf in parsing
When parsing 6 GHz operation, don't set the bss_conf
values. We only commit to that later in association,
so move the code there. Also clear it later.

While at it, handle IEEE80211_6GHZ_CTRL_REG_VLP_AP.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.c2da4bc515e8.I219ca40e15c0fbaff0e7c3e83ca4b92ecbc1f8ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:50 +01:00
Johannes Berg
f04d2c247e wifi: mac80211: disallow drivers with HT wider than HE
To simplify the code in the next patch, disallow drivers
supporting 40 MHz in HT but not HE, since we'd otherwise
have to track local maximum bandwidth per mode there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.da15fe3214d2.I4df51ad2f4c844615c168bf9bdb498925b3c77d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:50 +01:00
Johannes Berg
6593c7aec7 wifi: mac80211: simplify HE capability access
For verifying the required HE capabilities are supported
locally, we access the HE capability element of the AP.
Simplify that access, we've already parsed and validated
it when parsing elements.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.2ef62b43caeb.I8baa604dd3f3399e08b86c99395a2c6a1185d35d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:50 +01:00
Johannes Berg
f73ef56c94 wifi: mac80211: remove extra element parsing
We already parse all the BSS elements into elems, there's
really no need to separately find EHT/ML again. Remove the
extra code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.c4a55da9f778.I112b1ef00904c4183ac7644800f8daa8a4449875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:50 +01:00
Johannes Berg
d1155f2873 wifi: mac80211: simplify ieee80211_config_bw() prototype
The only user of this function passes a lot of pointers
directly from the parsed elements, so it's simpler to
just pass the entire elements parsing struct. This also
shows that the ht_cap is actually unused.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.f0653cd5e7dd.I8bd5ee848074029a9f0495c95e4339546ad8fe15@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:50 +01:00
Johannes Berg
2b3e35d98b wifi: mac80211_hwsim: advertise 15 simultaneous links
Advertise MLD capabilities and operations in AP mode that
say that up to 15 links are supported simultaneously.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.52a1d48b67e6.Ie459df742944d24d6401683d54d2f3ac44834803@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Johannes Berg
ccb964b4ab wifi: cfg80211: validate MLO connections better
When going into an MLO connection, validate that the link IDs
match what userspace indicated, and that the AP MLD addresses
and capabilities are all matching between the links.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.ff83c034cb9a.I9962db0bfa8c73b37b8d5b59a3fad7f02f2129ae@changeid
[roll in extra fix from Miri to actually check the return value]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Johannes Berg
a8b652604e wifi: mac80211: take EML/MLD capa from assoc response
The association response is more likely to be correct
than a random scan result, which really also should be
correct, but we generally prefer to take data from the
association response, so do that here as well.

Also reset the data so it doesn't hang around from an
old connection to a non-MLO connection, drivers would
hopefully not look at it, but less surprise this way.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.1d10f1d1dbab.I545e955675e2269a52496a22ae7822d95b40235e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Johannes Berg
6a19031da9 wifi: mac80211_hwsim: advertise AP-side EMLSR/EMLMR capa
Advertise EMLSR and EMLMR capability on the AP side to be
a better compliant AP MLD.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.dc8786efa787.Ic460c13a91d770c208ac16d0b3e94941bab9b8eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Johannes Berg
3b220ed8b2 wifi: mac80211: add support for SPP A-MSDUs
If software crypto is used, simply add support for SPP A-MSDUs
(and use it whenever enabled as required by the cfg80211 API).

If hardware crypto is used, leave it up to the driver to set
the NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT flag and then check
sta->spp_amsdu or the IEEE80211_KEY_FLAG_SPP_AMSDU key flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.b8ada4514e2b.I1ac25d5f158165b5a88062a5a5e4c4fbeecf9a5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Johannes Berg
2518e89d5b wifi: cfg80211: add support for SPP A-MSDUs
Add SPP (signaling and payload protected) AMSDU support.

Since userspace has to build the RSNX element, add an extended
feature flag to indicate that this is supported.

In order to avoid downgrade/mismatch attacks, add a flag to the assoc
command on the station side, so that we can be sure that the value of
the flag comes from the same RSNX element that will be validated by
the supplicant against the 4-way-handshake. If we just pulled the
data out of a beacon/probe response, we could theoretically look an
RSNX element from a different frame, with a different value for this
flag, than the supplicant is using to validate in the
4-way-handshake.

Note that this patch is only geared towards software crypto
implementations or hardware ones that can perfectly implement SPP
A-MSDUs, i.e. are able to switch the AAD construction on the fly for
each TX/RX frame.

For more limited hardware implementations, more capability
advertisement  would be required, e.g. if the hardware has no way
to switch this on the fly but has only a global configuration that
must apply to all stations.

The driver could of course *reject* mismatches, but the supplicant
must know so it can do things like not negotiating SPP A-MSDUs on
a T-DLS link when connected to an AP that doesn't support it, or
similar.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.fadac8df7030.I9240aebcba1be49636a73c647ed0af862713fc6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Ilan Peer
34b5ff4617 wifi: mac80211_hwsim: Declare support for negotiated TTLM
Advertise support for negotiated TTLM in AP mode for testing
purposes. In addition, declare support for some extended
capabilities that are globally advertised by mac80211.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.3f54382f8449.I42b2f7c52f7574448cc8da3ad3db45075e4e0baa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Ayala Beker
f7660b3f58 wifi: mac80211: add support for negotiated TTLM request
Update neg_ttlm and active_links according to the new mapping,
and send a negotiated TID-to-link map request with the new mapping.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.eeb385d771df.I2a5441c14421de884dbd93d1624ce7bb2c944833@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Ayala Beker
9362fabced wifi: mac80211_hwsim: handle BSS_CHANGED_MLD_TTLM
Same as in BSS_CHANGED_VALID_LINKS, set the active
links to all the usable links.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.3c28da3534e9.I76846c5dd693f930d4828e411c734639708b5a1a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:49 +01:00
Ayala Beker
03d5110241 wifi: mac80211_hwsim: handle TID to link mapping neg request
Accept the request if all TIDs are mapped to the same link set,
otherwise reject it.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.dfa8e132d0cd.I5fbec1fef933980819ea39c1227f37d307ab1145@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:48 +01:00
Ayala Beker
8f500fbc6c wifi: mac80211: process and save negotiated TID to Link mapping request
An MLD may send TID-to-Link mapping request frame to negotiate
TID to link mapping with a peer MLD.
Support handling negotiated TID-to-Link mapping request frame
by parsing the frame, asking the driver whether it supports the
received mapping or not, and sending a TID-to-Link mapping response
to the AP MLD.
Theoretically, links that became inactive due to the received TID-to-Link
mapping request, can be selected to be activated but this would require
tearing down the negotiated TID-to-Link mapping, which is still not
supported.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.0bc1a24fcc9d.Ie72e47dc6f8c77d4a2f0947b775ef6367fe0edac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:48 +01:00
Ayala Beker
83e897a961 wifi: ieee80211: add definitions for negotiated TID to Link map
Add the relevant definitions and structures for TID to Link mapping
negotiation request/response/teardown according to P802.11be_D4.0.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.9ef2b866c8c7.Ieaf7dadea9961e0edc55d19c99f0f9fbae591de6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:48 +01:00
Joachim Vandersmissen
8203695ca5 crypto: testmgr - remove unused xts4096 and xts512 algorithms from testmgr.c
Commit a93492cae3 ("crypto: ccree - remove data unit size support")
removed support for the xts512 and xts4096 algorithms, but left them
defined in testmgr.c. This patch removes those definitions.

Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:33 +08:00
Erick Archer
4da3bc65d2 crypto: qat - use kcalloc_node() instead of kzalloc_node()
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific kcalloc_node() function instead of the
argument count * size in the kzalloc_node() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:33 +08:00
Erick Archer
1dc0c1389d crypto: sun8i-ce - Use kcalloc() instead of kzalloc()
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:33 +08:00
Benjamin Berg
4d1d6b3f45 wifi: cfg80211: add RNR with reporting AP information
If the reporting AP is part of the same MLD, then an entry in the RNR is
required in order to discover it again from the BSS generated from the
per-STA profile in the Multi-Link Probe Response.

We need this because we do not have a direct concept of an MLD AP and
just do the lookup from one to the other on the fly if needed. As such,
we need to ensure that this lookup will work both ways.

Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.4cb3dbb1d84f.I7c74edec83c5d7598cdd578929fd0876d67aef7f@changeid
[roll in off-by-one fix and test updates from Benjamin]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:39:32 +01:00
Wenkai Lin
61909cc831 crypto: hisilicon - Fix smp_processor_id() warnings
Switch to raw_smp_processor_id() to prevent a number of
warnings from kernel debugging. We do not care about
preemption here, as the CPU number is only used as a
poor mans load balancing or device selection. If preemption
happens during an encrypt/decrypt operation a small performance
hit will occur but everything will continue to work, so just
ignore it. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").

[ 7538.874350] BUG: using smp_processor_id() in preemptible [00000000] code: af_alg06/8438
[ 7538.874368] caller is debug_smp_processor_id+0x1c/0x28
[ 7538.874373] CPU: 50 PID: 8438 Comm: af_alg06 Kdump: loaded Not tainted 5.10.0.pc+ #18
[ 7538.874377] Call trace:
[ 7538.874387]  dump_backtrace+0x0/0x210
[ 7538.874389]  show_stack+0x2c/0x38
[ 7538.874392]  dump_stack+0x110/0x164
[ 7538.874394]  check_preemption_disabled+0xf4/0x108
[ 7538.874396]  debug_smp_processor_id+0x1c/0x28
[ 7538.874406]  sec_create_qps+0x24/0xe8 [hisi_sec2]
[ 7538.874408]  sec_ctx_base_init+0x20/0x4d8 [hisi_sec2]
[ 7538.874411]  sec_aead_ctx_init+0x68/0x180 [hisi_sec2]
[ 7538.874413]  sec_aead_sha256_ctx_init+0x28/0x38 [hisi_sec2]
[ 7538.874421]  crypto_aead_init_tfm+0x54/0x68
[ 7538.874423]  crypto_create_tfm_node+0x6c/0x110
[ 7538.874424]  crypto_alloc_tfm_node+0x74/0x288
[ 7538.874426]  crypto_alloc_aead+0x40/0x50
[ 7538.874431]  aead_bind+0x50/0xd0
[ 7538.874433]  alg_bind+0x94/0x148
[ 7538.874439]  __sys_bind+0x98/0x118
[ 7538.874441]  __arm64_sys_bind+0x28/0x38
[ 7538.874445]  do_el0_svc+0x88/0x258
[ 7538.874447]  el0_svc+0x1c/0x28
[ 7538.874449]  el0_sync_handler+0x8c/0xb8
[ 7538.874452]  el0_sync+0x148/0x180

Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
f691d444f9 crypto: arm64/aes-ccm - Merge finalization into en/decrypt asm helpers
The C glue code already infers whether or not the current iteration is
the final one, by comparing walk.nbytes with walk.total. This means we
can easily inform the asm helpers of this as well, by conditionally
passing a pointer to the original IV, which is used in the finalization
of the MAC. This removes the need for a separate call into the asm code
to perform the finalization.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
7150528849 crypto: arm64/aes-ccm - Merge encrypt and decrypt tail handling
The encryption and decryption code paths are mostly identical, except
for a small difference where the plaintext input into the MAC is taken
from either the input or the output block.

We can factor this in quite easily using a vector bit select, and a few
additional XORs, without the need for branches. This way, we can use the
same tail handling logic on the encrypt and decrypt code paths, allowing
further consolidation of the asm helpers in a subsequent patch.

(In the main loop, adding just a handful of ALU instructions results in
a noticeable performance hit [around 5% on Apple M2], so those routines
are kept separate)

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
565def1542 crypto: arm64/aes-ccm - Cache round keys and unroll AES loops
The CCM code as originally written attempted to use as few NEON
registers as possible, to avoid having to eagerly preserve/restore the
entire NEON register file at every call to kernel_neon_begin/end. At
that time, this API took a number of NEON registers as a parameter, and
only preserved that many registers.

Today, the NEON register file is restored lazily, and the old API is
long gone. This means we can use as many NEON registers as we can make
meaningful use of, which means in the AES case that we can keep all
round keys in registers rather than reloading each of them for each AES
block processed.

On Cortex-A53, this results in a speedup of more than 50%. (From 4
cycles per byte to 2.6 cycles per byte)

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
948ffc66e5 crypto: arm64/aes-ccm - Reuse existing MAC update for AAD input
CCM combines the counter (CTR) encryption mode with a MAC based on the
same block cipher. This MAC construction is a bit clunky: it invokes the
block cipher in a way that cannot be parallelized, resulting in poor CPU
pipeline efficiency.

The arm64 CCM code mitigates this by interleaving the encryption and MAC
at the AES round level, resulting in a substantial speedup. But this
approach does not apply to the additional authenticated data (AAD) which
is not encrypted.

This means the special asm routine dealing with the AAD is not any
better than the MAC update routine used by the arm64 AES block
encryption driver, so let's reuse that, and drop the special AES-CCM
version.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
c131098d6d crypto: arm64/aes-ccm - Replace bytewise tail handling with NEON permute
Implement the CCM tail handling using a single sequence that uses
permute vectors and overlapping loads and stores, rather than going over
the tail byte by byte in a loop, and using scalar operations. This is
more efficient, even though the measured speedup is only around 1-2% on
the CPUs I have tried.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
97c4c10daf crypto: arm64/aes-ccm - Pass short inputs via stack buffer
In preparation for optimizing the CCM core asm code using permutation
vectors and overlapping loads and stores, ensure that inputs shorter
than the size of a AES block are passed via a buffer on the stack, in a
way that positions the data at the end of a 16 byte buffer. This removes
the need for the asm code to reason about a rare corner case where the
tail of the data cannot be read/written using a single NEON load/store
instruction.

While at it, tweak the copyright header and authorship to bring it up to
date.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
88c6d50f64 crypto: arm64/aes-ccm - Keep NEON enabled during skcipher walk
Now that kernel mode NEON no longer disables preemption, we no longer
have to take care to disable and re-enable use of the NEON when calling
into the skcipher walk API. So just keep it enabled until done.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Ard Biesheuvel
f722002441 crypto: arm64/aes-ccm - Revert "Rewrite skcipher walker loop"
This reverts commit 57ead1bf1c, which updated the CCM code to only
rely on walk.nbytes to check for failures returned from the skcipher
walk API, mostly for the common good rather than to fix a particular
problem in the code.

This change introduces a problem of its own: the skcipher walk is
started with the 'atomic' argument set to false, which means that the
skcipher walk API is permitted to sleep. Subsequently, it invokes
skcipher_walk_done() with preemption disabled on the final iteration of
the loop. This appears to work by accident, but it is arguably a bad
example, and providing a better example was the point of the original
patch.

Given that future changes to the CCM code will rely on the original
behavior of entering the loop even for zero sized inputs, let's just
revert this change entirely, and proceed from there.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Colin Ian King
f18483c987 crypto: asymmetric_keys - remove redundant pointer secs
The pointer secs is being assigned a value however secs is never
read afterwards. The pointer secs is redundant and can be removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'secs' is used in the enclosing
expression, the value is never actually read from 'secs'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Colin Ian King
1bfde2c572 crypto: pcbc - remove redundant assignment to nbytes
The assignment to nbytes is redundant, the while loop needs
to just refer to the value in walk.nbytes and the value of
nbytes is being re-assigned inside the loop on both paths
of the following if-statement.  Remove redundant assignment.

Cleans up clang scan build warning:
warning: Although the value stored to 'nbytes' is used in
the enclosing expression, the value is never actually read
from 'nbytes' [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Weili Qian
8db78dd6cc crypto: hisilicon/qm - dump important registers values before resetting
Read the values of some device registers before the device
is reset, these values help analyze the cause of the device exception.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Weili Qian
8413fe3e7f crypto: hisilicon/qm - support get device state
Support get device current state. The value 0 indicates that
the device is busy, and the value 1 indicates that the
device is idle. When the device is in suspended, 1 is returned.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Minjie Du
cc342dba0d crypto: iaa - Remove unnecessary debugfs_create_dir() error check in iaa_crypto_debugfs_init()
This patch removes the debugfs_create_dir() error checking in
iaa_crypto_debugfs_init(). Because the debugfs_create_dir() is developed
in a way that the caller can safely handle the errors that
occur during the creation of DebugFS nodes.

Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Tom Zanussi
3274819b3c crypto: iaa - Remove header table code
The header table and related code is currently unused - it was
included and used for canned mode, but canned mode has been removed,
so this code can be safely removed as well.

This indirectly fixes a bug reported by Dan Carpenter.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-crypto/b2e0bd974981291e16882686a2b9b1db3986abe4.camel@linux.intel.com/T/#m4403253d6a4347a925fab4fc1cdb4ef7c095fb86
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Clay Chang
4bb439e856 KEYS: include header for EINVAL definition
This patch includes linux/errno.h to address the issue of 'EINVAL' being
undeclared.

Signed-off-by: Clay Chang <clayc@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Luca Weiss
5d7e1c411c dt-bindings: qcom-qce: Add compatible for SM6350
Add a compatible for the crypto block found on the SM6350 SoC.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:39:32 +08:00
Arnd Bergmann
23a22e831e crypto: qat - avoid memcpy() overflow warning
The use of array_size() leads gcc to assume the memcpy() can have a larger
limit than actually possible, which triggers a string fortification warning:

In file included from include/linux/string.h:296,
                 from include/linux/bitmap.h:12,
                 from include/linux/cpumask.h:12,
                 from include/linux/sched.h:16,
                 from include/linux/delay.h:23,
                 from include/linux/iopoll.h:12,
                 from drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:3:
In function 'fortify_memcpy_chk',
    inlined from 'adf_gen4_init_thd2arb_map' at drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:401:3:
include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  579 |    __write_overflow_field(p_size_field, size);
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fortify-string.h:588:4: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
  588 |    __read_overflow2_field(q_size_field, size);
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Add an explicit range check to avoid this.

Fixes: 5da6a2d535 ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:36:57 +08:00
Danny Tsen
109303336a crypto: vmx - Move to arch/powerpc/crypto
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.

drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c

deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl

This patch has been tested has passed the selftest.  The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.

Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:36:57 +08:00
Markus Elfring
e01966e643 crypto: virtio - Less function calls in __virtio_crypto_akcipher_do_req() after error detection
The kfree() function was called in up to two cases by the
__virtio_crypto_akcipher_do_req() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.

* Adjust jump targets.

* Delete two initialisations which became unnecessary
  with this refactoring.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:36:57 +08:00
Gaurav Jain
c5a2f74db7 crypto: caam - fix asynchronous hash
ahash_alg->setkey is updated to ahash_nosetkey in ahash.c
so checking setkey() function to determine hmac algorithm is not valid.

to fix this added is_hmac variable in structure caam_hash_alg to determine
whether the algorithm is hmac or not.

Fixes: 2f1f34c1bf ("crypto: ahash - optimize performance when wrapping shash")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:35:55 +08:00
Damian Muszynski
e1d54d153f crypto: qat - fix arbiter mapping generation algorithm for QAT 402xx
The commit "crypto: qat - generate dynamically arbiter mappings"
introduced a regression on qat_402xx devices.
This is reported when the driver probes the device, as indicated by
the following error messages:

  4xxx 0000:0b:00.0: enabling device (0140 -> 0142)
  4xxx 0000:0b:00.0: Generate of the thread to arbiter map failed
  4xxx 0000:0b:00.0: Direct firmware load for qat_402xx_mmp.bin failed with error -2

The root cause of this issue was the omission of a necessary function
pointer required by the mapping algorithm during the implementation.
Fix it by adding the missing function pointer.

Fixes: 5da6a2d535 ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26 16:31:45 +08:00
Dmitry Antipov
7f78840cf4 wifi: wireless: avoid strlen() in cfg80211_michael_mic_failure()
In 'cfg80211_michael_mic_failure()', avoid extra call to 'strlen()'
by using the value returned by 'sprintf()'. Compile tested only.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240110054246.371651-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26 09:28:26 +01:00
Randy Dunlap
c6e33edb02 ARM: OMAP2+: fix kernel-doc warnings
Use the correct function name in a comment.
Add the return value documentation for one function.

These changes prevent these warnings:

wd_timer.c:76: warning: expecting prototype for omap2_wdtimer_reset(). Prototype was for omap2_wd_timer_reset() instead
wd_timer.c:76: warning: No description found for return value of 'omap2_wd_timer_reset'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Message-ID: <20240117011004.22669-14-rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2024-01-26 10:28:07 +02:00