Commit graph

1,264,895 commits

Author SHA1 Message Date
Jan Glaza
b8ab885819 ice: ice_base.c: Add const modifier to params and vars
Add const modifier to function parameters and variables where appropriate
in ice_base.c and corresponding declarations in ice_base.h.

The reason for starting the change is that read-only pointers should be
marked as const when possible to allow for smoother and more optimal code
generation and optimization as well as allowing the compiler to warn the
developer about potentially unwanted modifications, while not carrying
noticeable negative impact.

Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Sachin Bahadur <sachin.bahadur@intel.com>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Jan Sokolowski
f9f9de23dc ice: remove rx_len_errors statistic
It was found that this statistic is incorrectly
reported by HW and thus, useless.

As RX length error statistics are shown to the
end user when requested, the values reported
are misleading.

Thus, that value is no longer reported and
doesn't count anymore when adding all rx errors.

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Jacob Keller
2a2cb4c6c1 ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()
The ice_vf_create_vsi() function and its VF ops helper introduced by commit
a4c785e8162e ("ice: convert vf_ops .vsi_rebuild to .create_vsi") are used
during an individual VF reset to re-create the VSI. This was done in order
to ensure that the VSI gets properly reconfigured within the hardware.

This is somewhat heavy handed as we completely release the VSI memory and
structure, and then create a new VSI. This can also potentially force a
change of the VSI index as we will re-use the first open slot in the VSI
array which may not be the same.

As part of implementing devlink reload, commit 6624e780a5 ("ice: split
ice_vsi_setup into smaller functions") split VSI setup into smaller
functions, introducing both ice_vsi_cfg() and ice_vsi_decfg() which can be
used to configure or deconfigure an existing software VSI structure.

Rather than completely removing the VSI and adding a new one using the
.create_vsi() VF operation, simply use ice_vsi_decfg() to remove the
current configuration. Save the VSI type and then call ice_vsi_cfg() to
reconfigure the VSI as the same type that it was before.

The existing reset logic assumes that all hardware filters will be removed,
so also call ice_fltr_remove_all() before re-configuring the VSI.

This new operation does not re-create the VSI, so rename it to
ice_vf_reconfig_vsi().

The new approach can safely share the exact same flow for both SR-IOV VFs
as well as the Scalable IOV VFs being worked on. This uses less code and is
a better abstraction over fully deleting the VSI and adding a new one.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Andrii Staikov
aa4967d852 ice: Add support for packet mirroring using hardware in switchdev mode
Switchdev mode allows to add mirroring rules to mirror incoming and
outgoing packets to the interface's port representor. Previously, this was
available only using software functionality. Add possibility to offload
this functionality to the NIC hardware.

Introduce ICE_MIRROR_PACKET filter action to the ice_sw_fwd_act_type enum
to identify the desired action and pass it to the hardware as well as the
VSI to mirror.

Example of tc mirror command using hardware:
  tc filter add dev ens1f0np0 ingress protocol ip prio 1 flower src_mac
  b4:96:91:a5:c7:a7 skip_sw action mirred egress mirror dev eth1

ens1f0np0 - PF
b4:96:91:a5:c7:a7 - source MAC address
eth1 - PR of a VF to mirror to

Co-developed-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Karol Kolacinski
82e71b226e ice: Enable SW interrupt from FW for LL TS
Introduce new capability - Low Latency Timestamping with Interrupt.
On supported devices, driver can request a single timestamp from FW
without polling the register afterwards. Instead, FW can issue
a dedicated interrupt when the timestamp was read from the PHY register
and its value is available to read from the register.
This eliminates the need of bottom half scheduling, which results in
minimal delay for timestamping.

For this mode, allocate TS indices sequentially, so that timestamps are
always completed in FIFO manner.

Co-developed-by: Yochai Hagvi <yochai.hagvi@intel.com>
Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Karol Kolacinski
00d5000144 ice: Schedule service task in IRQ top half
Schedule service task and EXTTS in the top half to avoid bottom half
scheduling if possible, which significantly reduces timestamping delay.

Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:31 -08:00
Dan Williams
11c8393202 Merge branch 'for-6.8/cxl-cdat' into for-6.8/cxl
Pick up the CDAT parsing and QOS class infrastructure for v6.8.
2024-01-02 11:03:04 -08:00
Randy Dunlap
58f1e9d3a3 cxl/region: use %pap format to print resource_size_t
Use "%pap" to print a resource_size_t (phys_addr_t derived type)
to prevent build warnings on 32-bit arches (seen on i386 and
riscv-32).

../drivers/cxl/core/region.c: In function 'alloc_hpa':
../drivers/cxl/core/region.c:556:25: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 5 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
  556 |                         "HPA allocation error (%ld) for size:%#llx in %s %pr\n",

Fixes: 7984d22f13 ("cxl/region: Add dev_dbg() detail on failure to allocate HPA space")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc:  <linux-cxl@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102173917.19718-1-rdunlap@infradead.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2024-01-02 11:02:49 -08:00
Paolo Bonzini
9cc52627c7 KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
 - Generate ISA extension reg_list using macros in get-reg-list selftest
 - Steal time account support along with selftest
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmWQ+cgACgkQrUjsVaLH
 LAckBA//R4X9L5ugfPdDunp3ntjZXmNtBS5pM2jD+UvaoFn2kOA1o5kOD5mXluuh
 0imNjVuzlrX7XoAATQ4BoeoXg0whDbnv/8TE13KqSl1PfNziH2p5YD2DuHXPST3B
 V2VHrGACZ4wN074Whztl0oYI72obGnmpcsiglifkeCvRPerghHuDu40eUaWvCmgD
 DPwT+bjBgxkDZ4IheyytUrPql6reALh1Qo1vfj0FsJAgj+MAqQeD8n6rixSPnOdE
 9XXa4jdu7ycDp675VX/DVEWsNBQGPrsRK/uCiMksO36td+wLCKpAkvX95mE0w/L8
 qFJ+dN1c+1ZkjooHdVLfq2MjxaIRwmIowk7SeJbpvGIf/zG3r7eany7eXJT0+NjO
 22j5FY2z1NqcSG6Fazx76Qp2vVBVbxHShP9h7d6VTZYS7XENjmV6IWHpTSuSF8+n
 puj8Nf5C7WuqbySirSgQndDuKawn9myqfXXEoAuSiZ+kVyYEl8QnXm2gAIcxRDHX
 x+NDPMv0DpMBRO9qa/tXeqgNue/XOTJwgbmXzAlCNff3U7hPIHJ/5aZiJ/Re5TeE
 DxiU9AmIsNN2Bh0csS/wQbdScIqkOdOiDYEwT1DXOJWpmhiyCW7vR8ltaIuMJ4vP
 DtlfuUlSe4aml957nAiqqyjQAY/7gqmpoaGwu+lmrOX1K7fdtF0=
 =FeiG
 -----END PGP SIGNATURE-----

Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.8 part #1

- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
2024-01-02 13:19:40 -05:00
Paolo Bonzini
731859dde8 - uvdevice fixed additional data return length
- stfle (feature indication) vsie fixes and minor cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmWUBE8ACgkQ41TmuOI4
 ufg9jA//YjZ725t0nTIMa1SzmFRJRvuAI6JBSnKhJI0/Z+aXiuUZm5tyFOVrZNLB
 tLTlTbTNA5ZzpyrvdNPTVfRKzK5nA7XtHY50Id3leyjsmhSPMWyiOZOn46mlCSAS
 UB9Fxu54RqEu4qiEkFFq4OVhMq0nYldK7pTSfQZW0FfnU4bC0mwg/qQ+u1v0GTRN
 dGmzhpqf2CTT8x7YhzAvOViVgMxQghb34Pfhar/mf0n3LCP0Shx5qOqLyja/+M/+
 EXk4vGF4vHYUB0HJkuAEAiLeyqztE5kty5u/hSQ2bk2dImBdeCg9eN6JMTzZKn6t
 yAdMdaNUpR769MnckKKG1qVKxuggzaB4toY9EVPLTHk42ZiqZPHo8avPCEsxnz+n
 rJKtxy0EPm74TPGG9Z2/v8dIB1VOBQ3V9KLu+hnR6BDw5DZJc/1GylEW6NyuVhZq
 Ak8XjFcY2Zx2tFWNwppoPziTRpsnbgevhAomyDvVelAO2buU6SXR/Rv7AsY97dEj
 2YTCHaBY1j2TjioQJm/AjOvBy0JhWGx9Wdni+ZyAdNG2xX7/JUbp1jKHHXp7Eolj
 7/driKHsNeqw2pRulEoLGQeTlx6GoabXb8HVqwPX8fC69WzJ7YQi4giQTX7rZR4B
 Mg6AMGl24iNjaHSIXrNbg9JrYjgOS45sZ2BBRybdhTmKBwbNGSk=
 =IY7z
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- uvdevice fixed additional data return length
- stfle (feature indication) vsie fixes and minor cleanup
2024-01-02 13:18:30 -05:00
Paolo Bonzini
136292522e LoongArch KVM changes for v6.8
1. Optimization for memslot hugepage checking.
 2. Cleanup and fix some HW/SW timer issues.
 3. Add LSX/LASX (128bit/256bit SIMD) support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmWGu+0WHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImesO7D/wOdYP96R+mRzpLBeuTtFxU8e4A
 3n2luxOeP8v1WYtQ9H8M01Wgly+9u6cJ2pgAlv79BQHfmCfC0aWQLmpnCZmk/mYW
 wtQ75ASA3Qg6zOBWEksCkA0LUdPDHfQuaaUXT7RYZ7QtHKSNkkhsw2nMCq6fgrXU
 RnZjGctjuxgYSqQtwzfYO2AjSBAfAq1MjSzCTULJ0KkE8o5Bg0KOoGj8ijC1U+ua
 QWBnqTNzeKmYmqAFfhXoiiFYcuBUq7DEk5RtwDU7SeqqJEV3a8AbbsrWfz+wMemG
 gri95uRxvnhpPZ+6/PrVjIezqexPJmQ9+tjY6mxh/bPRnS5ICFygjV3lt050JUK8
 xIaJEFvl7g88RIz5mnTeM9tU4ibIsCLgA9zj33ps2H7QP5NazUm1dzk1YGAgqPdw
 m5hjwtTFQEujQM6cz1DLfhoi15VDNcYUonJIvGFZMhl7InitDpB3u9sI+AVGIVUG
 yKzBkqGB1L1vbJGnuWmspEqSUo7Z9iYzuVGbOnjc9LKQ/8OpLxj0brymYheA+CKG
 CIdULximQFVEHc2lbE+H+bW4hnrFP4sN9hlTng7KN7ommCIg+FltisM8Nt5NLWID
 9ywLj4Qa0Qrc5vB3FJ8+ksuDe2nD83uVLj247R7B0wxQcYw4ocyW/YU+gayF4EjY
 6azutwllW5ZB+I3hyw==
 =phol
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-kvm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.8

1. Optimization for memslot hugepage checking.
2. Cleanup and fix some HW/SW timer issues.
3. Add LSX/LASX (128bit/256bit SIMD) support.
2024-01-02 13:16:29 -05:00
Shuicheng Lin
835e4d9bb3 drm/i915/guc: Change wa and EU_PERF_CNTL registers to MCR type
Some of the wa registers are MCR register, and EU_PERF_CNTL registers
are MCR register.
MCR register needs extra process for read/write.
As normal MMIO register also could work with the MCR register process,
change all wa registers to MCR type for code simplicity.

Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102010231.843778-1-shuicheng.lin@intel.com
2024-01-02 10:09:26 -08:00
Uwe Kleine-König
d642ef7111 virt: sev-guest: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/52826a50250304ab0af14c594009f7b901c2cd31.1703596577.git.u.kleine-koenig@pengutronix.de
2024-01-02 19:07:18 +01:00
Ilpo Järvinen
ac4f1897fa PCI: Fix 64GT/s effective data rate calculation
Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PCIe r6.1 sec 1.2, Table 1-1).  Correct the PCIE_SPEED2MBS_ENC()
calculation to reflect that.

Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-01-02 12:06:47 -06:00
Qiuxu Zhuo
1e92af09fa EDAC/skx_common: Filter out the invalid address
Decoding an invalid address with certain firmware decoders could
cause a #PF (Page Fault) in the EFI runtime context, which could
subsequently hang the system. To make {i10nm,skx}_edac more robust
against such bogus firmware decoders, filter out invalid addresses
before allowing the firmware decoder to process them.

Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20231207014512.78564-1-qiuxu.zhuo@intel.com
2024-01-02 09:20:08 -08:00
Kevin Hao
a280c9ceec jfs: Add missing set_freezable() for freezable kthread
The kernel thread function jfs_lazycommit() and jfs_sync() invoke the
try_to_freeze() in its loop. But all the kernel threads are no-freezable
by default. So if we want to make a kernel thread to be freezable, we have
to invoke set_freezable() explicitly.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2024-01-02 11:06:52 -06:00
Edward Adam Davis
49f9637aaf jfs: fix array-index-out-of-bounds in diNewExt
[Syz report]
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2
index -878706688 is out of range for type 'struct iagctl[128]'
CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:217 [inline]
 __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
 diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360
 diAllocExt fs/jfs/jfs_imap.c:1949 [inline]
 diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666
 diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587
 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
 jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225
 vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106
 do_mkdirat+0x264/0x3a0 fs/namei.c:4129
 __do_sys_mkdir fs/namei.c:4149 [inline]
 __se_sys_mkdir fs/namei.c:4147 [inline]
 __x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fcb7e6a0b57
Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57
RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140
RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

[Analysis]
When the agstart is too large, it can cause agno overflow.

[Fix]
After obtaining agno, if the value is invalid, exit the subsequent process.

Reported-and-tested-by: syzbot+553d90297e6d2f50dbc7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>

Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next
report by kernel test robot (Dan Carpenter).

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2024-01-02 11:02:30 -06:00
Mengqi Zhang
77e01b49e3 mmc: core: Add HS400 tuning in HS400es initialization
During the initialization to HS400es stage, add a HS400 tuning flow as an
optional process. For Mediatek IP, the HS400es mode requires a specific
tuning to ensure the correct HS400 timing setting.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Peter Robinson
09f164d393 mmc: sdhci_omap: Fix TI SoC dependencies
The sdhci_omap is specific to  older TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.

Fixes: 7d326930d3 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Peter Robinson
cb052da7f0 mmc: sdhci_am654: Fix TI SoC dependencies
The sdhci_am654 is specific to recent TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.

Fixes: 41fd4caeb0 ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Lin Gui
e4df56ad0b mmc: core: Add wp_grp_size sysfs node
The eMMC card can be set into write-protected mode to prevent data from
being accidentally modified or deleted. Wp_grp_size (Write Protect Group
Size) refers to an attribute of the eMMC card, used to manage write
protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size
(Write Protect Group Size) indicates how many eMMC blocks are contained in
each write protection group on the eMMC card.

To allow userspace easy access of the CSD register bits, let's add sysfs
node "wp_grp_size".

Signed-off-by: Lin Gui <lin.gui@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Adrian Hunter
b062136d0d mmc: mmc_test: Add re-tuning test
Add a test to repeatedly re-tune in between random reads. The test is
non-destructive of data on the card and runs for 30 seconds. It can be
repeated to test for longer durations.

If re-tuning is not supported, the test is skipped.

Example:

  # echo 'mmc1:0001' >  /sys/bus/mmc/drivers/mmcblk/unbind
  # echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmc_test/bind
  [   36.642257] mmc_test mmc1:0001: Card claimed for testing.
  # cat /sys/kernel/debug/mmc1/mmc1\:0001/testlist | grep tuning
  52:     Re-tuning reliability
  # echo 52 > /sys/kernel/debug/mmc1/mmc1\:0001/test
  [   91.522555] mmc1: Starting tests of card mmc1:0001...
  [   91.528425] mmc1: Test case 52. Re-tuning reliability...
  [  121.536682] mmc1: Result: OK
  [  121.539572] mmc1: Tests completed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231214090902.43628-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Andy Shevchenko
84a6be7db9 mmc: mmc_spi: remove custom DMA mapped buffers
There is no need to duplicate what SPI core or individual controller
drivers already do, i.e. mapping the buffers for DMA capable transfers.

Note, that the code, besides its redundancy, was buggy: strictly speaking
there is no guarantee, while it's true for those which can use this code
(see below), that the SPI host controller _is_ the device which does DMA.

Also see the Link tags below.

Additional notes. Currently only two SPI host controller drivers may use
premapped (by the user) DMA buffers:

  - drivers/spi/spi-au1550.c

  - drivers/spi/spi-fsl-spi.c

Both of them have DMA mapping support code. I don't expect that SPI host
controller code is worse than what has been done in mmc_spi. Hence I do
not expect any regressions here. Otherwise, I'm pretty much sure these
regressions have to be fixed in the respective drivers, and not here.

That said, remove all related pieces of DMA mapping code from mmc_spi.

Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/
Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Abdel Alkuor
4b6358e1fe hwmon: (lm75) Add AMS AS6200 temperature sensor
as6200 is a temperature sensor with 0.0625°C resolution and a
range between -40°C to 125°C.

By default, the driver configures as6200 as following:
- Converstion rate: 8 Hz
- Conversion mode: continuous
- Consecutive fault counts: 4 samples
- Alert state: high polarity
- Alert mode: comparator mode

Interrupt is supported for the alert pin.

Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Link: https://lore.kernel.org/r/d1686678991bf8ee0d00cb08ca046798f37ca4b3.1703127334.git.alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Abdel Alkuor
de9c6033fb dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
as6200 is a temperature sensor with a range between -40°C to
125°C degrees and an accuracy of ±0.4°C degree between 0
and 65°C and ±1°C for the other ranges.

Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/17ba2dfdb3d25bf1b5b4ed9f858b6e28902bedbe.1703127334.git.alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Luca Ceresoli
cfe0956446 hwmon: (lm75) remove now-unused include
Including hwmon-sysfs.h is not needed since sysfs code got removed from
this file in commit 08b0243381 ("hwmon: (lm75) Convert to use new hwmon
registration API").

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231228-hwmon-cleanup-include-v1-1-e36f65aee1f0@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Peter Yin
f9e5f289b6 hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a dual-loop, digital, multi-phase,
modulation controller.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com
[groeck: Fix checkpatch issues, use i2c_get_match_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Peter Yin
956cf0986a dt-bindings: Add MP2856/MP2857 voltage regulator device
Monolithic Power Systems, Inc. (MPS) MP2856/MP2857
dual-loop, digital, multi-phase controller.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231211160519.21254-2-potin.lai.pt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Aleksa Savic
f60b9d405f hwmon: (aquacomputer_d5next) Remove unneeded CONFIG_DEBUG_FS #ifdef
Remove the #ifdef check for CONFIG_DEBUG_FS and the empty variant
of aqc_debugfs_init(), because the debugfs functions already do nothing
if debugfs isn't enabled.

Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231216140754.336775-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
David Heidelberg
4ec21eeac4 dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
Convert fan devices connected to GPIOs to the YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231209171653.85468-1-david@ixit.cz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Jami Kurki
06f34bcc9a hwmon: (k10temp) Add support for AMD Family 19h Model 8h
Add support for AMD Family 19h Model 8h CPUs, which appear to
be the Zen 3 based AMD Threadripper 5000WX series (Chagall).

The patch was tested with an AMD Threadripper 5955WX.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218244
Tested-by: Jami Kurki <bindkeys@gmail.com>
Signed-off-by: Jami Kurki <bindkeys@gmail.com>
Co-developed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231211210206.11060-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Aleksa Savic
42ac68e3d4 hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers
This driver exposes hardware sensors of the Gigabyte AORUS Waterforce
all-in-one CPU liquid coolers, which communicate through a proprietary
USB HID protocol. Report offsets were initially discovered in [1] and
confirmed by me on a Waterforce X240 by observing the sent reports from
the official software.

Available sensors are pump and fan speed in RPM, as well as coolant
temperature. Also available through debugfs is the firmware version.

Attaching a fan is optional and allows it to be controlled from the
device. If it's not connected, the fan-related sensors will report
zeroes.

The addressable RGB LEDs and LCD screen are not supported in this
driver and should be controlled through userspace tools.

[1]: https://github.com/liquidctl/liquidctl/issues/167

Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231207122402.107032-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Uwe Kleine-König
7ae587eb16 hwmon: (smsc47m1) Rename global platform device variable
pdev is a bad name for a global variable. Still more as the driver has
functions where pdev is a local variable. Rename it to smsc47m1_pdev.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/68a959b56da7f9452557d08c72249182364b0dd0.1701957841.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Uwe Kleine-König
581076958e hwmon: (smsc47m1) Simplify device registration
Use platform_device_register_full() instead of open coding this
function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/ab326fb9b1ad2191583b4cb3a8bd624dfedb908e.1701957841.git.u.kleine-koenig@pengutronix.de
[groeck: Removed double empty line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Uwe Kleine-König
5c2833c882 hwmon: (smsc47m1) Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a732270539ef63094a32d0ff582f78e640caf3e4.1701957841.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Uwe Kleine-König
3b018391b6 hwmon: (smsc47m1) Mark driver struct with __refdata to prevent section mismatch
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning

	WARNING: modpost: drivers/hwmon/smsc47m1: section mismatch in reference: smsc47m1_driver+0x8 (section: .data) -> smsc47m1_remove (section: .exit.text)

that triggers on an allmodconfig W=1 build.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/57977a88a9b99b6555b227aa4994ac3df10c6490.1701957840.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Serge Semin
4359b7d254 MAINTAINERS: Add maintainer for Baikal-T1 PVT hwmon driver
Add myself as a maintainer of the Baikal-T1 PVT sensors driver.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20231122170506.27267-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Stefan Gloor
6ec09effb2 hwmon: (sht3x) add sts3x support
Add information regarding the existing support for sts3x series and
update the datasheet links.

Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Link: https://lore.kernel.org/r/20231204165004.8491-2-code@stefan-gloor.ch
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:56 -08:00
Delphine CC Chiu
0c459759ca hwmon: (pmbus) Add ltc4286 driver
Add a driver to support ltc4286 chip

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Link: https://lore.kernel.org/r/20231123015440.199822-3-Delphine_CC_Chiu@Wiwynn.com
[groeck: Fixed formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:55 -08:00
Yuntao Wang
01638431c4 efi/x86: Fix the missing KASLR_FLAG bit in boot_params->hdr.loadflags
When KASLR is enabled, the KASLR_FLAG bit in boot_params->hdr.loadflags
should be set to 1 to propagate KASLR status from compressed kernel to
kernel, just as the choose_random_location() function does.

Currently, when the kernel is booted via the EFI stub, the KASLR_FLAG
bit in boot_params->hdr.loadflags is not set, even though it should be.
This causes some functions, such as kernel_randomize_memory(), not to
execute as expected. Fix it.

Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ardb: drop 'else' branch clearing KASLR_FLAG]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-02 16:51:28 +01:00
Stefan Wahren
643fe70e7b ARM: sun9i: smp: fix return code check of of_property_match_string
of_property_match_string returns an int; either an index from 0 or
greater if successful or negative on failure. Even it's very
unlikely that the DT CPU node contains multiple enable-methods
these checks should be fixed.

This patch was inspired by the work of Nick Desaulniers.

Link: https://lore.kernel.org/lkml/20230516-sunxi-v1-1-ac4b9651a8c1@google.com/T/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-2-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-02 16:45:16 +01:00
Stefan Wahren
72ad3b772b ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:

 UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
 index 2 is out of range for type 'sunxi_mc_smp_data [2]'
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
 Hardware name: BCM2835
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x40/0x4c
  dump_stack_lvl from ubsan_epilogue+0x8/0x34
  ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
  __ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
  sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
  do_one_initcall from kernel_init_freeable+0xf4/0x2f4
  kernel_init_freeable from kernel_init+0x18/0x158
  kernel_init from ret_from_fork+0x14/0x28

Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.

Fixes: 1631090e34 ("ARM: sun9i: smp: Add is_a83t field")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-1-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-02 16:45:07 +01:00
Gergo Koteles
b5cb53fd32 ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
The 14ARB7 has two tas2563 amplifier on i2c.
Connect it to the tas2781 driver.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-02 16:15:42 +01:00
Gergo Koteles
c3ca4458cc ALSA: hda/tas2781: add TAS2563 support for 14ARB7
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7
laptop. It has two TAS2563 amplifier. Add the PNP ID
and calibration functions to handle them.

ACPI excerpt:

Scope (_SB.I2CD)
{
    Device (TAS)
    {
        Name (_HID, "INT8866")  // _HID: Hardware ID
        Name (_UID, Zero)  // _UID: Unique ID
        Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
        {
            Name (RBUF, ResourceTemplate ()
            {
                I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
                    AddressingMode7Bit, "\\_SB.I2CD",
                    0x00, ResourceConsumer, , Exclusive,
                    )
                I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80,
                    AddressingMode7Bit, "\\_SB.I2CD",
                    0x00, ResourceConsumer, , Exclusive,
                    )
                GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000,
                    "\\_SB.GPIO", 0x00, ResourceConsumer, ,
                    )
                    {   // Pin list
                        0x0020
                    }
             })
             Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
        }

        Method (_STA, 0, NotSerialized)  // _STA: Status
        {
            Return (0x0F)
        }
    }
}

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-02 16:15:28 +01:00
Gergo Koteles
c021ca729f ALSA: hda/tas2781: add configurable global i2c address
Make the global i2c address configurable to support compatible amplifiers
with different global i2c address.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-02 16:15:09 +01:00
Gergo Koteles
76f5f55c45 ALSA: hda/tas2781: add ptrs to calibration functions
Make calibration functions configurable to support different calibration
data storage modes.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-02 16:14:01 +01:00
Andy Chi
18a434f32f ALSA: hda/realtek: fix mute/micmute LEDs for a HP ZBook
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.

[ confirmed that the new entries are for new models that have no
  proper name, so the strings are left as "HP" which will be updated
  eventually later -- tiwai ]

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-02 15:56:01 +01:00
David S. Miller
954fb2d2d4 Merge branch 'remove-retired-tc-uapi'
Jamal Hadi Salim says:

====================
net/sched: Remove UAPI support for retired TC qdiscs and classifiers

Classifiers RSVP and tcindex as well as qdiscs dsmark, CBQ and ATM have already
been deleted. This patchset removes their UAPI support.

User space - with a focus on iproute2 - typically copies these UAPI headers for
different kernels.
These deletion patches are coordinated with the iproute2 maintainers to make
sure that they delete any user space code referencing removed objects at their
leisure.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-02 14:25:51 +00:00
Jamal Hadi Salim
33241dca48 net/sched: Remove uapi support for CBQ qdisc
Commit 051d442098 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.

Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-02 14:25:51 +00:00
Jamal Hadi Salim
26cc8714fc net/sched: Remove uapi support for ATM qdisc
Commit fb38306ceb ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.

Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-02 14:25:51 +00:00