Commit graph

1,264,895 commits

Author SHA1 Message Date
Pasha Tatashin
ab78ffe1ff vhost-vdpa: account iommu allocations
iommu allocations should be accounted in order to allow admins to
monitor and limit the amount of iommu memory.

Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231226182827.294158-1-pasha.tatashin@soleen.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
2023-12-27 15:50:36 -05:00
Attreyee Mukherjee
5cb23af389 Documentation/i2c: fix spelling error in i2c-address-translators
Correct to "stretched" from "streched" in "keeps clock streched on bus A
waiting for reply".

Signed-off-by: Attreyee Mukherjee <tintinm2017@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-12-27 20:05:44 +01:00
Kurt Kanzenbach
7afd49a38e igc: Check VLAN EtherType mask
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.

For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
|             m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x8100 mask: 0x0
|        VLAN: 0x0 mask: 0xffff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 0

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
|             m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported

Fixes: 2b477d057e ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:26:04 -08:00
Kurt Kanzenbach
b5063cbe14 igc: Check VLAN TCI mask
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.

There are two ways to handle the VLAN TCI mask:

 1. Match on the PCP field using a VLAN prio filter
 2. Match on complete TCI field using a flex filter

Therefore, add checks and code for that.

For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
|             action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x0 mask: 0xffff
|        VLAN: 0x1 mask: 0x1fff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 1

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
|             action 1
|rmgr: Cannot insert RX class rule: Operation not supported

Fixes: 7991487ecb ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:26:04 -08:00
Kurt Kanzenbach
088464abd4 igc: Report VLAN EtherType matching back to user
Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.

Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        Action: Direct to queue 0

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x8100 mask: 0x0
|        VLAN: 0x0 mask: 0xffff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 0

Fixes: 2b477d057e ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:26:04 -08:00
Sudheer Mogilappagari
3e48041d98 i40e: Fix filter input checks to prevent config with invalid values
Prevent VF from configuring filters with unsupported actions or use
REDIRECT action with invalid tc number. Current checks could cause
out of bounds access on PF side.

Fixes: e284fc2804 ("i40e: Add and delete cloud filter")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:07:11 -08:00
Arkadiusz Kubalewski
8278a6a43d ice: dpll: fix phase offset value
Stop dividing the phase_offset value received from firmware. This fault
is present since the initial implementation.
The phase_offset value received from firmware is in 0.01ps resolution.
Dpll subsystem is using the value in 0.001ps, raw value is adjusted
before providing it to the user.

The user can observe the value of phase offset with response to
`pin-get` netlink message of dpll subsystem for an active pin:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
	--do pin-get --json '{"id":2}'

Where example of correct response would be:
{'board-label': 'C827_0-RCLKA',
 'capabilities': 6,
 'clock-id': 4658613174691613800,
 'frequency': 1953125,
 'id': 2,
 'module-name': 'ice',
 'parent-device': [{'direction': 'input',
                    'parent-id': 6,
                    'phase-offset': -216839550,
                    'prio': 9,
                    'state': 'connected'},
                   {'direction': 'input',
                    'parent-id': 7,
                    'phase-offset': -42930,
                    'prio': 8,
                    'state': 'connected'}],
 'phase-adjust': 0,
 'phase-adjust-max': 16723,
 'phase-adjust-min': -16723,
 'type': 'mux'}

Provided phase-offset value (-42930) shall be divided by the user with
DPLL_PHASE_OFFSET_DIVIDER to get actual value of -42.930 ps.

Before the fix, the response was not correct:
{'board-label': 'C827_0-RCLKA',
 'capabilities': 6,
 'clock-id': 4658613174691613800,
 'frequency': 1953125,
 'id': 2,
 'module-name': 'ice',
 'parent-device': [{'direction': 'input',
                    'parent-id': 6,
                    'phase-offset': -216839,
                    'prio': 9,
                    'state': 'connected'},
                   {'direction': 'input',
                    'parent-id': 7,
                    'phase-offset': -42,
                    'prio': 8,
                    'state': 'connected'}],
 'phase-adjust': 0,
 'phase-adjust-max': 16723,
 'phase-adjust-min': -16723,
 'type': 'mux'}

Where phase-offset value (-42), after division
(DPLL_PHASE_OFFSET_DIVIDER) would be: -0.042 ps.

Fixes: 8a3a565ff2 ("ice: add admin commands to access cgu configuration")
Fixes: 90e1c90750 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:07:11 -08:00
Ngai-Mint Kwan
6d05ff55ef ice: Shut down VSI with "link-down-on-close" enabled
Disabling netdev with ethtool private flag "link-down-on-close" enabled
can cause NULL pointer dereference bug. Shut down VSI regardless of
"link-down-on-close" state.

Fixes: 8ac7132704 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:07:11 -08:00
Katarzyna Wieczerzycka
6a8d8bb55e ice: Fix link_down_on_close message
The driver should not report an error message when for a medialess port
the link_down_on_close flag is enabled and the physical link cannot be
set down.

Fixes: 8ac7132704 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27 10:07:11 -08:00
Christoph Hellwig
d6b9f4e6f7 block: rename and document BLK_DEF_MAX_SECTORS
Give BLK_DEF_MAX_SECTORS a _CAP postfix and document what it is used for.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27 10:46:01 -07:00
Christoph Hellwig
3d77976c3a loop: don't abuse BLK_DEF_MAX_SECTORS
BLK_DEF_MAX_SECTORS despite the confusing name is the default cap for
the max_sectors limits.  Don't use it to initialize max_hw_setors, which
is a hardware / driver capacility.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27 10:46:01 -07:00
Christoph Hellwig
3888b2ee62 aoe: don't abuse BLK_DEF_MAX_SECTORS
BLK_DEF_MAX_SECTORS despite the confusing name is the default cap for
the max_sectors limits.  Don't use it to initialize max_hw_setors, which
is a hardware / driver capacility.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27 10:46:01 -07:00
Christoph Hellwig
9a9525de86 null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
null_blk has some rather odd capping of the max_hw_sectors value to
BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the
hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the
default cap for the max_sectors field used for normal file system I/O.

Remove all the capping, and simply leave it to the block layer or
user to take up or not all of that for file system I/O.

Fixes: ea17fd354c ("null_blk: Allow controlling max_hw_sectors limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27 10:46:01 -07:00
Christoph Hellwig
34c7db44b4 loop: don't update discard limits from loop_set_status
loop_set_status doesn't change anything relevant to the discard and
write_zeroes setting, so don't bother calling loop_config_discard.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227082020.249427-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-27 10:43:46 -07:00
Kent Overstreet
1e2f2d3199 Kill sched.h dependency on rcupdate.h
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big
sched.h dependency.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27 11:50:20 -05:00
Kent Overstreet
e717ceb529 kill unnecessary thread_info.h include
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27 11:49:56 -05:00
Kent Overstreet
30094208cd Kill unnecessary kernel.h include
More trimming down unnecessary includes.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27 11:49:56 -05:00
Kent Overstreet
2b010a6935 preempt.h: Kill dependency on list.h
We really only need types.h, list.h is big.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27 11:49:56 -05:00
Kent Overstreet
932562a604 rseq: Split out rseq.h from sched.h
We're trying to get sched.h down to more or less just types only, not
code - rseq can live in its own header.

This helps us kill the dependency on preempt.h in sched.h.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27 11:49:56 -05:00
Randy Dunlap
c968b99f86 LoongArch: signal.c: add header file to fix build error
loongarch's signal.c uses rseq_signal_deliver() so it should
pull in the appropriate header to prevent a build error:

../arch/loongarch/kernel/signal.c: In function 'handle_signal':
../arch/loongarch/kernel/signal.c:1034:9: error: implicit declaration of function 'rseq_signal_deliver' [-Werror=implicit-function-declaration]
 1034 |         rseq_signal_deliver(ksig, regs);
      |         ^~~~~~~~~~~~~~~~~~~

Fixes: b74baf4ad0 ("LoongArch: Add signal handling support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: loongarch@lists.linux.dev
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27 11:49:56 -05:00
Bartosz Golaszewski
513246a34b gpio: sysfs: drop tabs from local variable declarations
Older code has an annoying habit of putting tabs between the type and the
name of the variable. This doesn't really add to readability and newer
code doesn't do it so make the entire file consistent.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-27 16:01:37 +01:00
Bartosz Golaszewski
0338f6a6fb gpiolib: drop tabs from local variable declarations
Older code has an annoying habit of putting tabs between the type and the
name of the variable. This doesn't really add to readability and newer
code doesn't do it so make the entire file consistent.

While at it: convert 'unsigned' to 'unsigned int'.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-27 16:00:17 +01:00
Bartosz Golaszewski
5d5dfc50e5 gpiolib: remove extra_checks
extra_checks is only used in a few places. It also depends on
a non-standard DEBUG define one needs to add to the source file. The
overhead of removing it should be minimal (we already use pure
might_sleep() in the code anyway) so drop it.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27 15:58:39 +01:00
Bartosz Golaszewski
7dd1871e50 gpio: tps65219: don't use CONFIG_DEBUG_GPIO
CONFIG_DEBUG_GPIO should only be used to enable debug log messages and
for core GPIOLIB debugging. Don't use it to control the execution of
potentially buggy code. Just put it under an always-false #if.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27 15:56:48 +01:00
Andy Shevchenko
ad5575eb62 MAINTAINERS: Add a missing file to the INTEL GPIO section
When gpio-tangier was split the new born headers had been missed
in the MAINTAINERS. Add it there.

Fixes: d2c19e89e0 ("gpio: tangier: Introduce Intel Tangier GPIO driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27 15:55:44 +01:00
Andy Shevchenko
d4c139ca7c MAINTAINERS: Remove Andy from GPIO maintainers
Too many things are going on, and reviewing GPIO related code
seems not the best I can do, hence I step down as a reviewer of
the GPIO subsystem.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27 15:53:11 +01:00
Bartosz Golaszewski
7cf4e68315 MAINTAINERS: split out the uAPI into a new section
Kent Gibson is the author of the character device uAPI v2 and should be
Cc'ed on all patches aimed for it. Unfortunately this is not the case as
he's not listed in MAINTAINERS. Split the uAPI files into their own
section and make Kent the reviewer.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27 15:51:30 +01:00
Kent Gibson
20bddcb40b gpiolib: cdev: replace locking wrappers for gpio_device with guards
Replace the wrapping functions that inhibit removal of the gpio chip
with equivalent guards.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27 15:45:45 +01:00
Kent Gibson
32d8e3b645 gpiolib: cdev: replace locking wrappers for config_mutex with guards
After the adoption of guard(), the locking wrappers that hold the
config_mutex for linereq_set_values() and linereq_set_config() no
longer add value, so combine them into the functions they wrap.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27 15:45:30 +01:00
Kent Gibson
b718fbfea9 gpiolib: cdev: allocate linereq using kvzalloc()
The size of struct linereq may exceed a page, so allocate space for
it using kvzalloc() instead of kzalloc() to handle the case where
memory is heavily fragmented and kzalloc() cannot find a sufficient
contiguous region.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27 15:43:56 +01:00
Kent Gibson
ede7511e7c gpiolib: cdev: include overflow.h
struct_size() is used to calculate struct linereq size, so explicitly
include overflow.h.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27 15:43:40 +01:00
Bartosz Golaszewski
4ccdaba5ab Linux 6.7-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmWHepQeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGm6YH/0b9hMQ1f2DbMjEq
 w8h0bIMkc+Jv9fLVgCMA8nTuAQsYNp+MJ8PKA9t8CCtG1BTs+lXr6DsN2GpoODEj
 fMCXzyHTlMgg5S0iXAXHcxX1t1gRDgxoOeBvUY8YZw1JZriNsO+dF3U7rRdrmg1n
 7jq6WFxJfuB2NMlmys7vk/0c3t193AKxkWyDFBmiim3MX0IYxGlD5DVadaxA6Vx7
 Pqjt9ljVG11jJWeQ9ZFLd5RmZkdmY/JVlPagEr5rPDsJrbL23sLUu4bRHGBWcipU
 BgBUdj7K6tahuwKeg2KENxCGjvQOaFIti1l1CvHMWKPgFFlhE30DD6x7nZldPSj6
 m52I1xE=
 =tLIr
 -----END PGP SIGNATURE-----

Merge tag 'v6.7-rc7' into gpio/for-next

Linux 6.7-rc7
2023-12-27 15:41:04 +01:00
Arnd Bergmann
c0c4579d79 clocksource/drivers/ep93xx: Fix error handling during probe
When the interrupt property fails to be parsed, ep93xx_timer_of_init()
return code ends up uninitialized:

drivers/clocksource/timer-ep93xx.c:160:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (irq < 0) {
            ^~~~~~~
drivers/clocksource/timer-ep93xx.c:188:9: note: uninitialized use occurs here
        return ret;
               ^~~
drivers/clocksource/timer-ep93xx.c:160:2: note: remove the 'if' if its condition is always false
        if (irq < 0) {
        ^~~~~~~~~~~~~~

Simplify this portion to use the normal construct of just checking
whether a valid interrupt was returned. Note that irq_of_parse_and_map()
never returns a negative value and no other callers check for that either.

Fixes: c28ca80ba3 ("clocksource: ep93xx: Add driver for Cirrus Logic EP93xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231212214616.193098-1-arnd@kernel.org
2023-12-27 15:37:11 +01:00
Randy Dunlap
0515c73467 clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
Fix some function kernel-doc warnings to placate scripts/kernel-doc.

timer-cadence-ttc.c:79: warning: Function parameter or member 'clk_rate_change_nb' not described in 'ttc_timer'
timer-cadence-ttc.c:158: warning: Function parameter or member 'cs' not described in '__ttc_clocksource_read'
timer-cadence-ttc.c:194: warning: expecting prototype for ttc_set_{shutdown|oneshot|periodic}(). Prototype was for ttc_shutdown() instead
timer-cadence-ttc.c:196: warning: No description found for return value of 'ttc_shutdown'
timer-cadence-ttc.c:212: warning: No description found for return value of 'ttc_set_periodic'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231205230448.772-1-rdunlap@infradead.org
2023-12-27 15:37:11 +01:00
Tony Lindgren
b99a212a76 clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
Kernel test robot reports of kerneldoc related warnings that happen with
make W=n for "parameter or member not described".

These were caused by changes to function parameter names with
earlier commits where the kerneldoc parts were not updated.

Fixes: 49cd16bb57 ("clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()")
Fixes: a6e543f615 ("clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040403.DzIiBuwU-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311040606.XL5OcR9O-lkp@intel.com/
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231114072930.40615-1-tony@atomide.com
2023-12-27 15:37:11 +01:00
Joshua Yeong
6a902b118e clocksource/timer-riscv: Add riscv_clock_shutdown callback
Add clocksource detach/shutdown callback to disable RISC-V timer interrupt when
switching out riscv timer as clock source

Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231116105312.4800-1-joshua.yeong@starfivetech.com
2023-12-27 15:37:11 +01:00
Sia Jee Heng
e0cf60151e dt-bindings: timer: Add StarFive JH8100 clint
Add compatible string for the StarFive JH8100 clint.

Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201121410.95298-4-jeeheng.sia@starfivetech.com
2023-12-27 15:37:11 +01:00
Inochi Amaoto
b91cf01cf3 dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
The timer registers of aclint don't follow the clint layout and can
be mapped on any different offset. As sg2042 uses separated timer
and mswi for its clint, it should follow the aclint spec and have
separated registers.

The previous patch introduced a new type of T-HEAD aclint timer which
has clint timer layout. Although it has the clint timer layout, it
should follow the aclint spec and uses the separated mtime and mtimecmp
regs. So a ABI change is needed to make the timer fit the aclint spec.

To make T-HEAD aclint timer more closer to the aclint spec, use
regs-names to represent the mtimecmp register, which can avoid hack
for unsupport mtime register of T-HEAD aclint timer.

Also, as T-HEAD aclint only supports mtimecmp, it is unnecessary to
implement the whole aclint spec. To make this binding T-HEAD specific,
only add reg-name for existed register. For details, see the discussion
in the last link.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Fixes: 4734449f73 ("dt-bindings: timer: Add Sophgo sg2042 CLINT timer")
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005693.html
Link: https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc
Link: https://lore.kernel.org/all/IA1PR20MB4953F9D77FFC76A9D236922DBBB6A@IA1PR20MB4953.namprd20.prod.outlook.com/
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/IA1PR20MB49531ED1BCC00D6B265C2D10BB86A@IA1PR20MB4953.namprd20.prod.outlook.com
2023-12-27 15:37:11 +01:00
Kevin Hao
3fb65f6bc7 net: pktgen: Use wait_event_freezable_timeout() for freezable kthread
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
  wait_event_interruptible_timeout();
  try_to_freeze();

We can change it to a simple wait_event_freezable_timeout() and then
eliminate a function call.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 14:34:52 +00:00
David S. Miller
49fcf34ac9 Just a couple of things:
* debugfs fixes
  * rfkill fix in iwlwifi
  * remove mostly-not-working list
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmWCGOsACgkQ10qiO8sP
 aABpQQ/8DX872Tt7fhFKDOqiRAHiEL6Poh5OiJ8uROS4Q7+9SE/HaKXVNZ5kPGNB
 WeGH+tmXeECEC431Hya3dYXV71FZITS4SS/aztqpLQRw4/c/ZK7Isn/rhmN3ao5O
 /+s/QNvAvL9wLwvNT2O5QMDadXaSPVVRD3L2qIZ3Qfh/Bq4PMu6+3SZ4BuzYSEiB
 tsqcQvWeBOnBi3UFT4G+V1kMnZq6FfdltCZ91KNk0Yjjk4jpdDHKuoS3c2yxZqzA
 ck/9GqZg70/a3zUGSI34b5SgPH8R5JI+C3fIn/BMu7/3PZnJPktzYR0P7n+ZmIeC
 kYSEYX18qB8kmZIAaQiMMBOMEkJrgWlAoXoyZ6DtOS2v2xwm8HY4DnS8K3k2ErmQ
 q+EXBr3d4OnRErHu1Jv2KKPNJD2h+h//560tJQGsHn5XR2ps3gWW7V8p7jf/pnWm
 gYgxnO9VcaEl3RqUoV2exSiuCtoezTK1Xwz2RzAkupCoZ5GWLehASHi3NBtiEgjv
 Oy3eLRvTe4TjElid39L/oL9V3TRb9LBhn4U0JFlkaw/eYQqqFvqAjY2ScVkY8nPz
 i+MaSaoO43thdnGKfZU++JzECYeh+tVrr+NdMH2ar5OkRySNirL6LsTF/vns/K+K
 nlS8kpYzpvOdmeZQ/AeXZnzlcJZ8voIa2G/C4QGkv8n2dOys9ak=
 =LzdK
 -----END PGP SIGNATURE-----

Merge tag 'wireless-2023-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Just a couple of things:
 * debugfs fixes
 * rfkill fix in iwlwifi
 * remove mostly-not-working list
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:09:11 +00:00
David S. Miller
2f7ccf1d88 Merge branch 'net-tja11xx-macsec-support'
Radu Pirea says:

====================
Add MACsec support for TJA11XX C45 PHYs

This is the MACsec support for TJA11XX PHYs. The MACsec block encrypts
the ethernet frames on the fly and has no buffering. This operation will
grow the frames by 32 bytes. If the frames are sent back to back, the
MACsec block will not have enough room to insert the SecTAG and the ICV
and the frames will be dropped.

To mitigate this, the PHY can parse a specific ethertype with some
padding bytes and replace them with the SecTAG and ICV. These padding
bytes might be dummy or might contain information about TX SC that must
be used to encrypt the frame.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:10 +00:00
Radu Pirea (NXP OSS)
dc1a00380a net: phy: nxp-c45-tja11xx: implement mdo_insert_tx_tag
Implement mdo_insert_tx_tag to insert the TLV header in the ethernet
frame.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:10 +00:00
Radu Pirea (NXP OSS)
31a99fc06b net: phy: nxp-c45-tja11xx: add MACsec statistics
Add MACsec statistics callbacks.
The statistic registers must be set to 0 if the SC/SA is
deleted to read relevant values next time when the SC/SA is used.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:10 +00:00
Radu Pirea (NXP OSS)
a868b486cb net: phy: nxp-c45-tja11xx: add MACsec support
Add MACsec support.
The MACsec block has four TX SCs and four RX SCs. The driver supports up
to four SecY. Each SecY with one TX SC and one RX SC.
The RX SCs can have two keys, key A and key B, written in hardware and
enabled at the same time.
The TX SCs can have two keys written in hardware, but only one can be
active at a given time.
On TX, the SC is selected using the MAC source address. Due of this
selection mechanism, each offloaded netdev must have a unique MAC
address.
On RX, the SC is selected by SCI(found in SecTAG or calculated using MAC
SA), or using RX SC 0 as implicit.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:10 +00:00
Radu Pirea (NXP OSS)
a73d8779d6 net: macsec: introduce mdo_insert_tx_tag
Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in
the ethernet frame. This operation will increase the frame size with up
to 32 bytes. If the frames are sent at line rate, the PHY will not have
enough room to insert the SecTAG and the ICV.

Some PHYs use a hardware buffer to store a number of ethernet frames and,
if it fills up, a pause frame is sent to the MAC to control the flow.
This HW implementation does not need any modification in the stack.

Other PHYs might offer to use a specific ethertype with some padding
bytes present in the ethernet frame. This ethertype and its associated
bytes will be replaced by the SecTAG and ICV.

mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the
skb.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:10 +00:00
Radu Pirea (NXP OSS)
25a00d0cd6 net: macsec: revert the MAC address if mdo_upd_secy fails
Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device
might be left in an inconsistent state.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:10 +00:00
Radu Pirea (NXP OSS)
eb97b9bd38 net: macsec: documentation for macsec_context and macsec_ops
Add description for fields of struct macsec_context and struct
macsec_ops.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:09 +00:00
Radu Pirea (NXP OSS)
b1c036e835 net: macsec: move sci_to_cpu to macsec header
Move sci_to_cpu to the MACsec header to use it in drivers.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:09 +00:00
Radu Pirea (NXP OSS)
b34ab3527b net: macsec: use skb_ensure_writable_head_tail to expand the skb
Use skb_ensure_writable_head_tail to expand the skb if needed instead of
reimplementing a similar operation.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:09 +00:00
Radu Pirea (NXP OSS)
90abde49ea net: rename dsa_realloc_skb to skb_ensure_writable_head_tail
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:09 +00:00