Commit graph

1,264,895 commits

Author SHA1 Message Date
Dave Jiang
69b789b644 acpi: numa: Create enum for memory_target access coordinates indexing
Create enums to provide named indexing for the access coordinate array.
This is in preparation for adding generic port support which will add a
third index in the array to keep the generic port attributes separate from
the memory attributes.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319616332.2212653.3872789279950567889.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22 14:23:13 -08:00
Dave Jiang
6a954e94d0 base/node / acpi: Change 'node_hmem_attrs' to 'access_coordinates'
Dan Williams suggested changing the struct 'node_hmem_attrs' to
'access_coordinates' [1]. The struct is a container of r/w-latency and
r/w-bandwidth numbers. Moving forward, this container will also be used by
CXL to store the performance characteristics of each link hop in
the PCIE/CXL topology. So, where node_hmem_attrs is just the access
parameters of a memory-node, access_coordinates applies more broadly
to hardware topology characteristics. The observation is that seemed like
an exercise in having the application identify "where" it falls on a
spectrum of bandwidth and latency needs. For the tuple of
read/write-latency and read/write-bandwidth, "coordinates" is not a perfect
fit. Sometimes it is just conveying values in isolation and not a
"location" relative to other performance points, but in the end this data
is used to identify the performance operation point of a given memory-node.
[2]

Link: http://lore.kernel.org/r/64471313421f7_1b66294d5@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://lore.kernel.org/linux-cxl/645e6215ee0de_1e6f2945e@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/170319615734.2212653.15319394025985499185.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22 14:23:13 -08:00
Dave Jiang
60e43fe528 lib/firmware_table: tables: Add CDAT table parsing support
The CDAT table is very similar to ACPI tables when it comes to sub-table
and entry structures. The helper functions can be also used to parse the
CDAT table. Add support to the helper functions to deal with an external
CDAT table, and also handle the endieness since CDAT can be processed by a
BE host. Export a function cdat_table_parse() for CXL driver to parse
a CDAT table.

In order to minimize ACPICA code changes, __force is being utilized to deal
with the case of a big endian (BE) host parsing a CDAT. All CDAT data
structure variables are being force casted to __leX as appropriate.

Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319615131.2212653.10932785667981494238.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22 14:23:13 -08:00
David S. Miller
5f12303528 Merge branch 'tcp-refactor-bhash2'
Kuniyuki Iwashima says:

====================
tcp: Refactor bhash2 and remove sk_bind2_node.

This series refactors code around bhash2 and remove some bhash2-specific
fields; sock.sk_bind2_node, and inet_timewait_sock.tw_bind2_node.

  patch 1      : optimise bind() for non-wildcard v4-mapped-v6 address
  patch 2 -  4 : optimise bind() conflict tests
  patch 5 - 12 : Link bhash2 to bhash and unlink sk from bhash2 to
                 remove sk_bind2_node

The patch 8 will trigger a false-positive error by checkpatch.

v2: resend of https://lore.kernel.org/netdev/20231213082029.35149-1-kuniyu@amazon.com/
  * Rebase on latest net-next
  * Patch 11
    * Add change in inet_diag_dump_icsk() for recent bhash dump patch

v1: https://lore.kernel.org/netdev/20231023190255.39190-1-kuniyu@amazon.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
8191792c18 tcp: Remove dead code and fields for bhash2.
Now all sockets including TIME_WAIT are linked to bhash2 using
sock_common.skc_bind_node.

We no longer use inet_bind2_bucket.deathrow, sock.sk_bind2_node,
and inet_timewait_sock.tw_bind2_node.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
770041d337 tcp: Link sk and twsk to tb2->owners using skc_bind_node.
Now we can use sk_bind_node/tw_bind_node for bhash2, which means
we need not link TIME_WAIT sockets separately.

The dead code and sk_bind2_node will be removed in the next patch.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
b2cb9f9ef2 tcp: Unlink sk from bhash.
Now we do not use tb->owners and can unlink sockets from bhash.

sk_bind_node/tw_bind_node are available for bhash2 and will be
used in the following patch.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
8002d44fe8 tcp: Check hlist_empty(&tb->bhash2) instead of hlist_empty(&tb->owners).
We use hlist_empty(&tb->owners) to check if the bhash bucket has a socket.
We can check the child bhash2 buckets instead.

For this to work, the bhash2 bucket must be freed before the bhash bucket.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
b82ba728cc tcp: Iterate tb->bhash2 in inet_csk_bind_conflict().
Sockets in bhash are also linked to bhash2, but TIME_WAIT sockets
are linked separately in tb2->deathrow.

Let's replace tb->owners iteration in inet_csk_bind_conflict() with
two iterations over tb2->owners and tb2->deathrow.

This can be done safely under bhash's lock because socket insertion/
deletion in bhash2 happens with bhash's lock held.

Note that twsk_for_each_bound_bhash() will be removed later.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
58655bc0ad tcp: Rearrange tests in inet_csk_bind_conflict().
The following patch adds code in the !inet_use_bhash2_on_bind(sk)
case in inet_csk_bind_conflict().

To avoid adding nest and make the change cleaner, this patch
rearranges tests in inet_csk_bind_conflict().

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:35 +00:00
Kuniyuki Iwashima
822fb91fc7 tcp: Link bhash2 to bhash.
bhash2 added a new member sk_bind2_node in struct sock to link
sockets to bhash2 in addition to bhash.

bhash is still needed to search conflicting sockets efficiently
from a port for the wildcard address.  However, bhash itself need
not have sockets.

If we link each bhash2 bucket to the corresponding bhash bucket,
we can iterate the same set of the sockets from bhash2 via bhash.

This patch links bhash2 to bhash only, and the actual use will be
in the later patches.  Finally, we will remove sk_bind2_node.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:34 +00:00
Kuniyuki Iwashima
4dd7108854 tcp: Rename tb in inet_bind2_bucket_(init|create)().
Later, we no longer link sockets to bhash.  Instead, each bhash2
bucket is linked to the corresponding bhash bucket.

Then, we pass the bhash bucket to bhash2 allocation functions as
tb.  However, tb is already used in inet_bind2_bucket_create() and
inet_bind2_bucket_init() as the bhash2 bucket.

To make the following diff clear, let's use tb2 for the bhash2 bucket
there.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:34 +00:00
Kuniyuki Iwashima
5a22bba13d tcp: Save address type in inet_bind2_bucket.
inet_bind2_bucket_addr_match() and inet_bind2_bucket_match_addr_any()
are called for each bhash2 bucket to check conflicts.  Thus, we call
ipv6_addr_any() and ipv6_addr_v4mapped() over and over during bind().

Let's avoid calling them by saving the address type in inet_bind2_bucket.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:34 +00:00
Kuniyuki Iwashima
06a8c04f89 tcp: Save v4 address as v4-mapped-v6 in inet_bind2_bucket.v6_rcv_saddr.
In bhash2, IPv4/IPv6 addresses are saved in two union members,
which complicate address checks in inet_bind2_bucket_addr_match()
and inet_bind2_bucket_match_addr_any() considering uninitialised
memory and v4-mapped-v6 conflicts.

Let's simplify that by saving IPv4 address as v4-mapped-v6 address
and defining tb2.rcv_saddr as tb2.v6_rcv_saddr.s6_addr32[3].

Then, we can compare v6 address as is, and after checking v4-mapped-v6,
we can compare v4 address easily.  Also, we can remove tb2->family.

Note these functions will be further refactored in the next patch.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:34 +00:00
Kuniyuki Iwashima
56f3e3f01f tcp: Rearrange tests in inet_bind2_bucket_(addr_match|match_addr_any)().
The protocol family tests in inet_bind2_bucket_addr_match() and
inet_bind2_bucket_match_addr_any() are ordered as follows.

  if (sk->sk_family != tb2->family)
  else if (sk->sk_family == AF_INET6)
  else

This patch rearranges them so that AF_INET6 socket is handled first
to make the following patch tidy, where tb2->family will be removed.

  if (sk->sk_family == AF_INET6)
  else if (tb2->family == AF_INET6)
  else

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:34 +00:00
Kuniyuki Iwashima
5e07e67241 tcp: Use bhash2 for v4-mapped-v6 non-wildcard address.
While checking port availability in bind() or listen(), we used only
bhash for all v4-mapped-v6 addresses.  But there is no good reason not
to use bhash2 for v4-mapped-v6 non-wildcard addresses.

Let's do it by returning true in inet_use_bhash2_on_bind().  Then, we
also need to add a test in inet_bind2_bucket_match_addr_any() so that
::ffff:X.X.X.X will match with 0.0.0.0.

Note that sk->sk_rcv_saddr is initialised for v4-mapped-v6 sk in
__inet6_bind().

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:15:34 +00:00
Colin Ian King
67f440c05d selftests/net: Fix various spelling mistakes in TCP-AO tests
There are a handful of spelling mistakes in test messages in the
TCP-AIO selftests. Fix these.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22 22:13:00 +00:00
Linus Torvalds
c0f65a7c11 printk changes for 6.8
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmWFxecACgkQUqAMR0iA
 lPLq0RAAg0YQxIltUuR1/IcsVB6rMz8eekmR62sQlmsM2mYRHiEX4ffvM2aSuoMW
 1ikAqtfDCFpjIg2dxlirIIA1bkCj7P9wUDShwZispPmjiAag1Woj3E02Q7enxljF
 LwkdBP0rm/59jGj3u/HKqQ/vwbusg6cezoCXXUqf9BMc7AaD9w4wyF4LbdyqVdcS
 B1ngNvqyONH7LS2rp3sixowbO0KDgtaPKFg3kC9r5Aqhz0pvJtmrdQhssx5jQzJ3
 emnKdSPvrtbeLMa+/mYO9OsYa2PnqkotLRq5ulW4b/9QNluPmVqQbkyqiFJGldFo
 /jHLIIYM9CwaOhvqLY5o1uBq8jXQH6dyfE8Yv2aOcVGN8loTR3eG77h+ZgDAsIXL
 6p5Twx4zCYlI80R8H5nVdpPa0MUjLBK7bG/oT7pmGnxK9pqtKNdejXqhrPzUcH0i
 sVbR9BfOTcWXQlL1CcQRc5sfoikv0Qp6TQbpaE+qyHogWZI3oOaJBo2ietvYx0Lp
 E73amdvkJ2q55rEspTdLxLDQCd7hov2zkQMtIHzLBybk7i9QaMLnzzjmUe7yy9yc
 il/8Ma+8PtYsPfC77PjMp7shI94Ldps0383I/NAon8DrUG7bV6CXd3QAPB1c7P/b
 AN7Qjig1udk7yZDHCm5TbX/niB3/sfiBWJINHG764+iUa3lkJ8E=
 =m5F8
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk fix from Petr Mladek:

 - Prevent refcount warning from code releasing a fwnode

* tag 'printk-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  lib/vsprintf: Fix %pfwf when current node refcount == 0
2023-12-22 13:41:29 -08:00
Yauhen Kharuzhy
8e2f79f41a HID: sensor-hub: Enable hid core report processing for all devices
After the commit 666cf30a58 ("HID: sensor-hub: Allow multi-function
sensor devices") hub devices are claimed by hidraw driver in hid_connect().
This causes stoppping of processing HID reports by hid core due to
optimization.

In such case, the hid-sensor-custom driver cannot match a known custom
sensor in hid_sensor_custom_get_known() because it try to check custom
properties which weren't filled from the report because hid core didn't
parsed it.

As result, custom sensors like hinge angle sensor and LISS sensors
don't work.

Mark the sensor hub devices claimed by some driver to avoid hidraw-related
optimizations.

Fixes: 666cf30a58 ("HID: sensor-hub: Allow multi-function sensor devices")
Cc: stable@vger.kernel.org
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231219231503.1506801-1-jekhor@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2023-12-22 19:16:33 +01:00
Gui-Dong Han
da9065caa5 Bluetooth: Fix atomicity violation in {min,max}_key_size_set
In min_key_size_set():
    if (val > hdev->le_max_key_size || val < SMP_MIN_ENC_KEY_SIZE)
        return -EINVAL;
    hci_dev_lock(hdev);
    hdev->le_min_key_size = val;
    hci_dev_unlock(hdev);

In max_key_size_set():
    if (val > SMP_MAX_ENC_KEY_SIZE || val < hdev->le_min_key_size)
        return -EINVAL;
    hci_dev_lock(hdev);
    hdev->le_max_key_size = val;
    hci_dev_unlock(hdev);

The atomicity violation occurs due to concurrent execution of set_min and
set_max funcs.Consider a scenario where setmin writes a new, valid 'min'
value, and concurrently, setmax writes a value that is greater than the
old 'min' but smaller than the new 'min'. In this case, setmax might check
against the old 'min' value (before acquiring the lock) but write its
value after the 'min' has been updated by setmin. This leads to a
situation where the 'max' value ends up being smaller than the 'min'
value, which is an inconsistency.

This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 5.17.

To resolve this issue, it is suggested to encompass the validity checks
within the locked sections in both set_min and set_max funcs. The
modification ensures that the validation of 'val' against the
current min/max values is atomic, thus maintaining the integrity of the
settings. With this patch applied, our tool no longer reports the bug,
with the kernel configuration allyesconfig for x86_64. Due to the lack of
associated hardware, we cannot test the patch in runtime testing, and just
verify it according to the code logic.

[1] https://sites.google.com/view/basscheck/

Fixes: 18f81241b7 ("Bluetooth: Move {min,max}_key_size debugfs ...")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 13:00:36 -05:00
Jagan Teki
3600860a71 Bluetooth: Add device 13d3:3572 IMC Networks Bluetooth Radio
This 13d3:3572 is part of  Realtek RTW8852BE chip.

The device table is:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3572 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 13:00:11 -05:00
Frédéric Danis
96a3398b46 Bluetooth: L2CAP: Fix possible multiple reject send
In case of an incomplete command or a command with a null identifier 2
reject packets will be sent, one with the identifier and one with 0.
Consuming the data of the command will prevent it.
This allows to send a reject packet for each corrupted command in a
multi-command packet.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:59:46 -05:00
clancy shang
d4b70ba1ea Bluetooth: hci_sync: fix BR/EDR wakeup bug
when Bluetooth set the event mask and enter suspend, the controller
has hci mode change event coming, it cause controller can not enter
sleep mode. so it should to set the hci mode change event mask before
enter suspend.

Signed-off-by: clancy shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:59:22 -05:00
Francesco Dolcini
3c83800a6c Bluetooth: btnxpuart: remove useless assignment
Remove useless assignment of rx_skb to NULL in case the skb is in error,
this is already done in h4_recv_buf() that is executed a few lines
before.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:58:57 -05:00
Francesco Dolcini
64057f051f Bluetooth: btmtkuart: fix recv_buf() return value
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return negative number in case of issue, just print an error and
return count. This fixes a WARN in ttyport_receive_buf().

Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/
Fixes: 7237c4c9ec ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:58:35 -05:00
Francesco Dolcini
94d0539425 Bluetooth: btnxpuart: fix recv_buf() return value
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return a negative number in case of issue, just print an error
and return count. Before this change, in case of error, the returned
negative number was internally converted to 0 in ttyport_receive_buf,
now when the receive buffer is corrupted we return the size of the whole
received data (`count`). This should allow for better recovery in case
receiver/transmitter get out of sync if some data is lost.

This fixes a WARN in ttyport_receive_buf().

  Bluetooth: hci0: Frame reassembly failed (-84)
  ------------[ cut here ]------------
  serial serial0: receive_buf returns -84 (count = 6)
  WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
  Modules linked in: mwifiex_sdio(+) ...
  CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
  Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
  Workqueue: events_unbound flush_to_ldisc
  pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : ttyport_receive_buf+0xd8/0xf8
  lr : ttyport_receive_buf+0xd8/0xf8
...
  Call trace:
   ttyport_receive_buf+0xd8/0xf8
   flush_to_ldisc+0xbc/0x1a4
   process_scheduled_works+0x16c/0x28c

Closes: https://lore.kernel.org/all/ZWEIhcUXfutb5SY6@francesco-nb.int.toradex.com/
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:58:11 -05:00
Zijun Hu
ca6d2adf8d Bluetooth: qca: Support HFP offload for QCA2066
For QCA2066 HFP offload, HCI_Configure_Data_Path is not required since
present HCI_Enhanced_Setup_Synchronous_Connection is enough to configure
non-HCI data transport path when set both Input_Data_Path and
Output_Data_Path parameters as 0x01, as is implemented by this change.

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:57:47 -05:00
Zijun Hu
132d0fd0b8 Bluetooth: hci_conn: Check non NULL function before calling for HFP offload
For some controllers such as QCA2066, it does not need to send
HCI_Configure_Data_Path to configure non-HCI data transport path to support
HFP offload, their device drivers may set hdev->get_codec_config_data as
NULL, so Explicitly add this non NULL checking before calling the function.

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:57:24 -05:00
Iulia Tanasescu
9f150019f1 Bluetooth: ISO: Avoid creating child socket if PA sync is terminating
When a PA sync socket is closed, the associated hcon is also unlinked
and cleaned up. If there are no other hcons marked with the
HCI_CONN_PA_SYNC flag, HCI_OP_LE_PA_TERM_SYNC is sent to controller.

Between the time of the command and the moment PA sync is terminated
in controller, residual BIGInfo reports might continue to come.
This causes a new PA sync hcon to be added, and a new socket to be
notified to user space.

This commit fixs this by adding a flag on a Broadcast listening
socket to mark when the PA sync child has been closed.

This flag is checked when BIGInfo reports are indicated in
iso_connect_ind, to avoid recreating a hcon and socket if
residual reports arrive before PA sync is terminated.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:57:00 -05:00
Luiz Augusto von Dentz
d03376c185 Bluetooth: Fix bogus check for re-auth no supported with non-ssp
This reverts 19f8def031
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.

Fixes: 19f8def031 ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:56:21 -05:00
Kiran K
a2e7707bba Bluetooth: btintel: Print firmware SHA1
Intel Read Version event contains a TLV(0x32) having firmware sha1 in
operational image.

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:55:56 -05:00
Luiz Augusto von Dentz
78db544b5d Bluetooth: hci_core: Remove le_restart_scan work
This removes le_restart_scan work and instead just disables controller
duplicate filtering when discovery result_filtering is enabled and
HCI_QUIRK_STRICT_DUPLICATE_FILTER is set.

Link: https://github.com/bluez/bluez/issues/573
Link: https://github.com/bluez/bluez/issues/572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:55:17 -05:00
Yuran Pereira
ba9e401493 Bluetooth: Add documentation to exported functions in lib
Most functions in `net/bluetooth/lib.c` lack propper
documentation.

This patch adds documentation to all exported functions
in `net/bluetooth/lib.c`.
Unnecessary or redundant comments are also removed to
ensure the file looks clean.

Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:54:55 -05:00
Luiz Augusto von Dentz
4e0a1d8b06 Bluetooth: btusb: Don't suspend when there are connections
This checks if there are connections before suspending since that may
disrupt the connections making it stop receiving any data if remote
wakeup is not enabled.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:54:30 -05:00
Zijun Hu
5d192b697c Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066
Set both WIDEBAND_SPEECH_SUPPORTED and VALID_LE_STATES quirks
for QCA2066.

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:54:08 -05:00
Iulia Tanasescu
fa224d0c09 Bluetooth: ISO: Reassociate a socket with an active BIS
For ISO Broadcast, all BISes from a BIG have the same lifespan - they
cannot be created or terminated independently from each other.

This links together all BIS hcons that are part of the same BIG, so all
hcons are kept alive as long as the BIG is active.

If multiple BIS sockets are opened for a BIG handle, and only part of
them are closed at some point, the associated hcons will be marked as
open. If new sockets will later be opened for the same BIG, they will
be reassociated with the open BIS hcons.

All BIS hcons will be cleaned up and the BIG will be terminated when
the last BIS socket is closed from userspace.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:53:29 -05:00
Iulia Tanasescu
80837140c1 Bluetooth: ISO: Allow binding a PA sync socket
This makes it possible to bind a PA sync socket to a number of BISes
before issuing the BIG Create Sync command.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22 12:47:15 -05:00
Steven Rostedt (Google)
ee9793be08 tracing/selftests: Add ownership modification tests for eventfs
As there were bugs found with the ownership of eventfs dynamic file
creation. Add a test to test it.

It will remount tracefs with a different gid and check the ownership of
the eventfs directory, as well as the system and event directories. It
will also check the event file directories.

It then does a chgrp on each of these as well to see if they all get
updated as expected.

Then it remounts the tracefs file system back to the original group and
makes sure that all the updated files and directories were reset back to
the original ownership.

It does the same for instances that change the ownership of he instance
directory.

Note, because the uid is not reset by a remount, it is tested for every
file by switching it to a new owner and then back again.

Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-22 10:01:41 -07:00
Linus Torvalds
5414aea7b7 sound fixes for 6.7-rc7
Apparently there were so many kids wishing bug fixes that made Santa
 busy; here we have lots of fixes although it's a bit late.
 But all changes are device-specific, hence it should be relatively
 safe to apply.
 
 Most of changes are for Cirrus codecs (for both ASoC and HD-audio),
 while the remaining are fixes for TI codecs, HD-audio and USB-audio
 quirks.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmWFuhMOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8hhw/+Pgazo/uYRbm9UdkhU/h65Jt1mwk9cNxhGoBw
 wI4PORTcFMYz2sY/IFtVdHL2ljG00ffaiQnHV4Ifi+/KobojI/PpyUkvA5c1/L3c
 4i8BdwfWu4cEr7zSNtA3p18PY/8Ka1o6rRLPHHKX/AnGuzx4gv/chbOUCLkDuD96
 Yq6W4X6YuT0Sb9xPa9nZRQHxw4OrAc7XbV0yswnvEBgKAzpSNwOM3RxiUncwL2xK
 UMX7gIBEIg38I5T5hGIZtiAJapoCSOmOXgunJrR9XB3LYQm7QZM30YGeAjYordhq
 z05qFiv03GLRAhnS1smn4udhjloSDNb/4Vz1kg5u2VV+6SOFjjfA7N6/P+rbXXEA
 45UzQY5tf/oqDfuAzVUJ2Tbjdzs4Rxzi9k3Zr9Ig5sXPGkyQA30Iy9OQZxDFsSbR
 kToEVNJWflf/BXfHhOl/DcKniXmeJD3FYCmCQFXPK8t3JOcjXB6UM5qqkZBfl0A5
 QCKGBudgGbsDbIPeiYS//l+VTWXUU02wVIr8jn0YltVbatOQI1RoDqg9KTT9ISi3
 kfIGhtLAoHgqPe2DCmONinZr3cDGtG8M3czTr2aZBgLLv3tHP/QfIUbq6T1aYbD0
 kolo9jmBDcK2V1t/mWhZh3LsGwNx1qcIIkEaVsh7nsicSyGpkRjpedL1A+XwY/fT
 izGrIE4=
 =KNH2
 -----END PGP SIGNATURE-----

Merge tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Apparently there were so many kids wishing bug fixes that made Santa
  busy; here we have lots of fixes although it's a bit late. But all
  changes are device-specific, hence it should be relatively safe to
  apply.

  Most of changes are for Cirrus codecs (for both ASoC and HD-audio),
  while the remaining are fixes for TI codecs, HD-audio and USB-audio
  quirks"

* tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel
  ALSA: hda: cs35l41: Do not allow uninitialised variables to be freed
  ASoC: fsl_sai: Fix channel swap issue on i.MX8MP
  ASoC: hdmi-codec: fix missing report for jack initial status
  ALSA: hda/realtek: Add quirks for ASUS Zenbook 2023 Models
  ALSA: hda: cs35l41: Support additional ASUS Zenbook 2023 Models
  ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models
  ALSA: hda: cs35l41: Support additional ASUS Zenbook 2022 Models
  ALSA: hda/realtek: Add quirks for ASUS ROG 2023 models
  ALSA: hda: cs35l41: Support additional ASUS ROG 2023 models
  ALSA: hda: cs35l41: Add config table to support many laptops without _DSD
  ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk
  ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346
  kselftest: alsa: fixed a print formatting warning
  ALSA: usb-audio: Increase delay in MOTU M quirk
  ASoC: tas2781: check the validity of prm_no/cfg_no
  ALSA: hda/tas2781: select program 0, conf 0 by default
  ALSA: hda/realtek: Add quirk for ASUS ROG GV302XA
  ASoC: cs42l43: Don't enable bias sense during type detect
  ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
  ...
2023-12-22 08:46:44 -08:00
Linus Torvalds
2618280ded i2c-qcom-geni gets error path fixes, i2c-rk3x fixes polling mode,
i2c-aspeed gets state machine fixes in target mode
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmWFaxUACgkQFA3kzBSg
 KbYz/w/9HTDZuMCD9zgFNORW/w1fC/2ricglFALXW0x0j0pzDk9LtwcxKXREcHBR
 oM8CSpbxygoDoMZ0cKoZH7DFWLgivTZt2uRXtlkzjbzHB5pXX3v8xh5E/KMG6zJd
 IfTtn9hn4YOYGo4zT7SmS33S2JuG6/eaa/YNkicPH+pBLu8T7CpQ9ZyOdI6cOwG7
 llr5y5qPLJ+RhRu1fEMCVdZ1kuYWnRkCYTuYytKuYoPK9N2PbJFqiN13irKZWD7C
 8O/Eb/FhoV4+8D0S6ALIYVB1pinQ8O7XV/EM1NArHtxngVQA2n+gJZu291O8oXhF
 rqAMFsexV/eSSiuChnt2jJ1fzaavKsPgqJh9s6jspG/kmUs9OLbtKB6XW2OZPpKN
 hqzoidOXyJqgoBNe6DCYo2a/yHEIq0ruPRxX3ta262cJKHtl7mO12M2TzrLJgljb
 PmfDaN9Z7Ko0OyOnbEpCS6j+M6MBf829XFZyUQMkkRWYJuuYmQNqXZ34ZkJy35n6
 0dWtdnwaC4rT335CKU3ILWdR+7bBAMXzhe0TM9leW5Hc7BT9eRnImycQLqaxQ0gQ
 rEaQSo+8VVUCa5UlgBsvsxMdTXwoH1Qy9Rg6pBSpdTqeyl8SUTqNq+UFk89fOThi
 LDmv3OUaDYRc7i+HCjICiZGINIw01utuRFPGJ5jkVpuUCEy1pb0=
 =+sTM
 -----END PGP SIGNATURE-----

Merge tag 'i2c-for-6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

 - error path fixes (qcom-geni)

 - polling mode fix (rk3x)

 - target mode state machine fix (aspeed)

* tag 'i2c-for-6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  i2c: rk3x: fix potential spinlock recursion on poll
  i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()
2023-12-22 08:42:55 -08:00
Linus Torvalds
a9ca0330d2 gpio fixes for v6.7-rc7
- add protection against GPIO device removal to an overlooked ioctl()
 - synchronize the interrupt mask register manually in gpio-dwapb
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmWFXYkACgkQEacuoBRx
 13IsAA/+K6QiKybX9tWQ6jSSWwrye3mu/mT7UHCmVOFDhmbvCUfFMnIBPAqf5cad
 r1dgsEofRYCSkQm3e+lackkx+JrJfYOzOLkIvrXSOktePUAA1ZhP7FLZOtQ2Dm4B
 08hV5v9LQOw/HoXJiDHqohQcn/JKie/sE74wiCJiUmANml5nfbr8cirMJ69QMYJW
 Ua6kjglaNroWCEOvz+q3/0hMVJtAq4ND7BSkk70aMPXa11UUVmoD3k2CHQAXtjX+
 w66L8HbVliAxnWaale6kXB83ST8qxQ9UBnA/2z03hunD7VfJuN1wFEs6HzxMV4pm
 vZE84X3/GHFBqJ2VG/u5GJuaZvYltuTmFmsEjVbKBsm/ZkCPpGEAsTnAmjUvb+tu
 MvT+cfhHOHW0BAgFf4T/tyxmeumE1T5zYyXiH+x49g7VaxLWcu37pUKwPtiRSEBy
 XC4FrXMsMQ2brIYnSZJWaGd8PFNaAyOycSLhe59xpOrZriDXWhvPXjjwz7KEUtNB
 FNceb67HKYZ/ZQErqCPFUj3OvJql4T3VaRTswJEemo9SVUUELW+UioECpjrid4zk
 cxKlZ/uffNwfBVXNCdac91lIkTWAKvReruna4sta/CZwAr4YtAbFz1DrA5Q11iBL
 nD2DxIItY3Lb0G3S6FRGOjIU84zd9r72+jlXzHcO1fLnVIqnyRM=
 =sKPW
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
 "Here's another round of fixes from the GPIO subsystem for this release
  cycle.

  There's one commit adding synchronization to an ioctl() we overlooked
  previously and another synchronization changeset for one of the
  drivers:

   - add protection against GPIO device removal to an overlooked ioctl()

   - synchronize the interrupt mask register manually in gpio-dwapb"

* tag 'gpio-fixes-for-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: dwapb: mask/unmask IRQ when disable/enale it
  gpiolib: cdev: add gpio_device locking wrapper around gpio_ioctl()
2023-12-22 08:41:04 -08:00
Steven Rostedt (Google)
2654769110 tracing/selftests: Remove exec permissions from trace_marker.tc test
The tests in the selftests should not have the exec permissions set. The
trace_marker.tc test accidentally was committed with the exec permission.

Set the permission to that file back to just read/write.

No functional nor code changes.

Link: https://lore.kernel.org/linux-trace-kernel/20231222112831.4c7fa500@gandalf.local.home/

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-22 11:38:53 -05:00
Linus Torvalds
b7bc7bce88 xen: branch for v6.7-rc7
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZYUtLwAKCRCAXGG7T9hj
 vvAkAQDJED+V3e3adOpkt1xjLyftY2kzHbX9i0koIg7ivbBYEwD/c3yfPz2L8SXK
 IgU0LgxIMgGnjMRrBOuW9kY5FtDGPQQ=
 =EUSt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.7a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fix from Juergen Gross:
 "A single patch fixing a build issue for x86 32-bit configurations with
  CONFIG_XEN, which was introduced in the 6.7 development cycle"

* tag 'for-linus-6.7a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: add CPU dependencies for 32-bit build
2023-12-22 08:37:48 -08:00
Linus Torvalds
8afe6f0e0e drm fixes for 6.7-rc7
amdgpu:
 - DCN 3.5 fixes
 - DCN 3.2 SubVP fix
 - GPUVM fix
 
 amdkfd:
 - SVM fix for APUs
 
 i915:
 - Fix state readout and check for DSC and bigjoiner combo
 - Fix a potential integer overflow
 - Reject async flips with bigjoiner
 - Fix MTL HDMI/DP PLL clock selection
 - Fix various issues by disabling pipe DMC events
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmWFF0cACgkQDHTzWXnE
 hr7TKw/+IIaYJRFv2WY/4YM0uiJY7KDDIidHH+2UI3vN5HNLU37+uA+qJtCvkHJI
 a/m8YQ2sjBah1dfF7GnH+poo3M7CsvI7yWtFcLkLI1lUKuiU+Yc/uqaoVV5t7Efj
 9VYKo5MUDH4f4ZZOitrLlnX3/u7LJ3E7vFCkQX2CSSWPchaKD2i07QUiL04XCN7N
 vuVCCN3ymLmfbwWWLLoSmnWViBiFhlbBXe4hBz9c7gZLeeMIX69tQOY3XDAMHXvw
 iQ33m/EfJ20LHGqnVh5IXNOb2WdFXdLkipu16lUHthDmzbLQLqOWZMsZ7RKuEAv8
 dHjfGi6DhunxVUjLNEu/K/4h40xSFsfeEv/uWC98o4kNCw652vVHcSHG+t82wMwF
 5oyt8gq9rnGHKoJ15GzsFhlNJuwrZWqghdutF4H5/UiVxFeDBru0eP818XaZRO5F
 FyHRYyH/dCczQ6aD73WvLQFYJesiKODy6a09twEEhrEQFHGa7UqhgT6gwJH92gIb
 tIiHpSwiG1z3fwYg8MdSIUrJM98blmjQZWkVfY9+EaYDgVF3zpwFc80U+QEdV6xY
 dkZuhjF+oq08z1h/w1HIayVyTb9qGH0cPKs1yvnGfukaVk7EcQGvVCfYM57/RKHh
 MJOJZn4tqRVPEdDnzOpBAv2S1iDOHTSUC5QPddTHuapkWxm6DMU=
 =jMRA
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2023-12-22' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Pretty quiet for this week, just i915 and amdgpu fixes,

  I think the misc tree got lost this week, but didn't seem to have too
  much in it, so it can wait. I've also got a bunch of nouveau GSP fixes
  sailing around that'll probably land next time as well.

  amdgpu:
   - DCN 3.5 fixes
   - DCN 3.2 SubVP fix
   - GPUVM fix

  amdkfd:
   - SVM fix for APUs

  i915:
   - Fix state readout and check for DSC and bigjoiner combo
   - Fix a potential integer overflow
   - Reject async flips with bigjoiner
   - Fix MTL HDMI/DP PLL clock selection
   - Fix various issues by disabling pipe DMC events"

* tag 'drm-fixes-2023-12-22' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: re-create idle bo's PTE during VM state machine reset
  drm/amd/display: dereference variable before checking for zero
  drm/amd/display: get dprefclk ss info from integration info table
  drm/amd/display: Add case for dcn35 to support usb4 dmub hpd event
  drm/amd/display: disable FPO and SubVP for older DMUB versions on DCN32x
  drm/amdkfd: svm range always mapped flag not working on APU
  drm/amd/display: Revert " drm/amd/display: Use channel_width = 2 for vram table 3.0"
  drm/i915/dmc: Don't enable any pipe DMC events
  drm/i915/mtl: Fix HDMI/DP PLL clock selection
  drm/i915: Reject async flips with bigjoiner
  drm/i915/hwmon: Fix static analysis tool reported issues
  drm/i915/display: Get bigjoiner config before dsc config during readout
2023-12-22 07:59:25 -08:00
Linus Torvalds
93a165cb9a Two small fixes scheduled for stable trees
A tracepoint fix that's been reading past the end of messages forever,
 but semi-recently also went over the end of the buffer.
 And a potential incorrectly freeing garbage in pdu parsing error path
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE/IPbcYBuWt0zoYhOq06b7GqY5nAFAmWE4HEACgkQq06b7GqY
 5nBiaw//VKYbPnx+4wtyT17BnvamwEQH88kdIFLjcmGfCKJyBL1UrBfNoV+azzUa
 x4ob+M82zkRgfsQ0bDW1A4OWmRWXWngr/VJ53HpQA0FYff6dFGULXzHwQnz2Sn16
 Lhn7D0FhZZ12skIcCCDRADZIT9ydh7fEfaI3F2goDuvwopwAoOZnYQjIwVhjNuVo
 EIHO3VJShHh/sDMxdyurCkiv+PszIqUgeVW3FH9KNlFC/8hdKpMPGzVHpd1S72wP
 9rex+9yIWb5+o6zpxIB4K6lRWJg0itPKMRDGbey3BR1U7YAQlsGXJ54I6lMRSJ8N
 penT0ztpBSEVWauPvWt0cmkb/ccBFWml4uncT9WK47ExwtbmOhqsk/wOWon8Jho/
 i09lB/Uk5jHSvjong6BbKZ8rYhHdOK9lXfr8UWoJ+jWAilMHqt6Yxb61MRizfe60
 nsVNExBNr78gP/k2U0Fd1++27nB48jvvXN07lVM6uWqyjzaLXahVAb6moz9O7/PD
 ntZVocPCL+XLoByOhRrLNgpyrWiR3ClurpQCsR8d4AE3H7D0CyKLbdLBUBH6fkul
 RErrolev90AKNYthOf6MFWpZuyWnTpK4RooaB0D6KNsIfMUOhfAaIqaM2u50RK/T
 B7hWbFCSPfXkpAM9XcYayVnaJp2dj9MBu6ioQIns4DqqHB//M8U=
 =jdEx
 -----END PGP SIGNATURE-----

Merge tag '9p-for-6.7-rc7' of https://github.com/martinetd/linux

Pull 9p fixes from Dominique Martinet:
 "Two small fixes scheduled for stable trees:

  A tracepoint fix that's been reading past the end of messages forever,
  but semi-recently also went over the end of the buffer. And a
  potential incorrectly freeing garbage in pdu parsing error path"

* tag '9p-for-6.7-rc7' of https://github.com/martinetd/linux:
  net: 9p: avoid freeing uninit memory in p9pdu_vreadf
  9p: prevent read overrun in protocol dump tracepoint
2023-12-22 07:50:34 -08:00
Chintan Vankar
2029e71482 phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4
Enable full rate divider configuration support for J784S4_WIZ_10G
for SGMII.

Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231221102956.754617-2-c-vankar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22 21:20:08 +05:30
Chintan Vankar
d719915ad9 phy: ti: gmii-sel: Enable SGMII mode for J784S4
TI's J784S4 SoC supports SGMII mode with the CPSW9G instance of the CPSW
Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the
corresponding extra_modes member.

Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231221102956.754617-1-c-vankar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22 21:20:08 +05:30
Vinod Koul
3d0b2176e0 dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
xdma_prep_interleaved_dma() was local to file but not declared static,
leading to warning:

drivers/dma/xilinx/xdma.c:729:1: warning: no previous prototype for 'xdma_prep_interleaved_dma' [-Wmissing-prototypes]
  729 | xdma_prep_interleaved_dma(struct dma_chan *chan

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231222094001.731889-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22 21:17:52 +05:30
Vinod Koul
bbcd7b588b dmaengine: xilinx: xdma: Workaround truncation compilation error
Increase length to be copied to be large enough to overcome the
following compilation error. The buf is large enough for this purpose.

drivers/dma/xilinx/xilinx_dpdma.c: In function ‘xilinx_dpdma_debugfs_desc_done_irq_read’:
drivers/dma/xilinx/xilinx_dpdma.c:313:39: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  313 |         snprintf(buf, out_str_len, "%d",
      |                                       ^
drivers/dma/xilinx/xilinx_dpdma.c:313:9: note: ‘snprintf’ output between 2 and 6 bytes into a destination of size 5
  313 |         snprintf(buf, out_str_len, "%d",
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  314 |                  dpdma_debugfs.xilinx_dpdma_irq_done_count);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231222094017.731917-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22 21:17:52 +05:30
Mickaël Salaün
e2780a0b95
selftests/landlock: Add tests to check unhandled rule's access rights
Add two tests to make sure that we cannot add a rule to a ruleset if the
rule's access rights that are not handled by the ruleset:
* fs: layout1.rule_with_unhandled_access
* net: mini.rule_with_unhandled_access

Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231130093616.67340-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
2023-12-22 16:35:22 +01:00