Even if BLK_CGROUP is enabled, it does not work for passthrough io.
So skip setting up blkg for passthrough bio.
Reduced processing gives ~5% hike in peak-performance workload.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231218152722.1768-1-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For aux reads, the value `msg->size` indicates the size of the buffer
provided by `msg->buffer`. We should never in any circumstances write
more bytes to the buffer since it may overflow the buffer.
In the ti-sn65dsi86 driver there is one code path that reads the
transfer length from hardware. Even though it's never been seen to be
a problem, we should make extra sure that the hardware isn't
increasing the length since doing so would cause us to overrun the
buffer.
Fixes: 982f589bde ("drm/bridge: ti-sn65dsi86: Update reply on aux failures")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.2.I7b83c0f31aeedc6b1dc98c7c741d3e1f94f040f8@changeid
While testing, I happened to notice a random crash that looked like:
Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: drm_dp_dpcd_probe+0x120/0x120
Analysis of drm_dp_dpcd_probe() shows that we pass in a 1-byte buffer
(allocated on the stack) to the aux->transfer() function. Presumably
if the aux->transfer() writes more than one byte to this buffer then
we're in a bad shape.
Dropping into kgdb, I noticed that "aux->transfer" pointed at
ps8640_aux_transfer().
Reading through ps8640_aux_transfer(), I can see that there are cases
where it could write more bytes to msg->buffer than were specified by
msg->size. This could happen if the hardware reported back something
bogus to us. Let's fix this so we never write more than msg->size
bytes. We'll still read all the bytes from the hardware just in case
the hardware requires it since the aux transfer data comes through an
auto-incrementing register.
NOTE: I have no actual way to reproduce this issue but it seems likely
this is what was happening in the crash I looked at.
Fixes: 13afcdd727 ("drm/bridge: parade-ps8640: Add support for AUX channel")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.1.I9d1afcaad76a3e2c0ca046dc4adbc2b632c22eda@changeid
On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.
Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.
Fixes: 37fb29bd1f ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
These panels are used by Mediatek MT8173 Chromebooks, and they used to
work with the downstream v4.19 kernel without any specified delay.
Back in the v4.19 kernel, they used the "little white lie" approach,
which is making the devicetree claim a specific panel's compatible
string for many different panels. That was a common solution before the
generic edp-panel driver.
After we uprevved the device to a newer kernel and used the edp-panel
driver, we saw multiple devices reporting warnings of using an unknown
panel and falling back to the conservative timings, which means that
they turn on/off much more slowly than they should. We tried to fill in
the timings for those panels, but we failed to find all the data sheets
for them.
Therefore, instead of having them use the default conservative timings,
update them with less-conservative timings from other panels of the same
vendor. The panels should still work under those timings, and we can
save some delays and suppress the warnings.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-4-treapking@chromium.org
Add the support of powered_on_to_enable delay as the minimum time that
needs to have passed between the panel powered on and enable may begin.
This delay is seen in BOE panels as the minimum delay of T3+T4+T5+T6+T8
in the eDP timing diagrams.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-2-treapking@chromium.org
There's nothing wrong with this commit, but this is dead code now
that nothing triggers a CB_GETATTR callback. It can be re-introduced
once the issues with handling conflicting GETATTRs are resolved.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For some reason, the wait_on_bit() in nfsd4_deleg_getattr_conflict()
is waiting forever, preventing a clean server shutdown. The
requesting client might also hang waiting for a reply to the
conflicting GETATTR.
Invoking wait_on_bit() in an nfsd thread context is a hazard. The
correct fix is to replace this wait_on_bit() call site with a
mechanism that defers the conflicting GETATTR until the CB_GETATTR
completes or is known to have failed.
That will require some surgery and extended testing and it's late
in the v6.7-rc cycle, so I'm reverting now in favor of trying again
in a subsequent kernel release.
This is my fault: I should have recognized the ramifications of
calling wait_on_bit() in here before accepting this patch.
Thanks to Dai Ngo <dai.ngo@oracle.com> for diagnosing the issue.
Reported-by: Wolfgang Walter <linux-nfs@stwm.de>
Closes: https://lore.kernel.org/linux-nfs/e3d43ecdad554fbdcaa7181833834f78@stwm.de/
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* Use RAII for locking in the Tangier family of drivers (Raag)
* Update Tangier family of drivers to use new PM helpers (Raag)
The following is an automated git shortlog grouped by driver:
elkhartlake:
- reuse pm_ops from Intel Tangier driver
tangier:
- simplify locking using cleanup helpers
- unexport suspend/resume handles
- use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper
-----BEGIN PGP SIGNATURE-----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=TW/S
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.8-1
* Use RAII for locking in the Tangier family of drivers (Raag)
* Update Tangier family of drivers to use new PM helpers (Raag)
The following is an automated git shortlog grouped by driver:
elkhartlake:
- reuse pm_ops from Intel Tangier driver
tangier:
- simplify locking using cleanup helpers
- unexport suspend/resume handles
- use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper
The mtk_dp driver registers a phy device which is handled by the
phy_mtk_dp driver and assumes that the phy probe will complete
synchronously, proceeding to make use of functionality exposed by that
driver right away. This assumption however is false when the phy driver
is built as a module, causing the mtk_dp driver to fail probe in this
case.
Add the phy_mtk_dp module as a pre-dependency to the mtk_dp module to
ensure the phy module has been loaded before the dp, so that the phy
probe happens synchrounously and the mtk_dp driver can probe
successfully even with the phy driver built as a module.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231121142938.460846-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
1. New hardware: Add pin controllers for Samsung ExynosAutov920 and
Google Tensor GS101.
2. Few DT bindings cleanups: add specific compatibles for each device
using generic compatible as fallback. This affects only DTS, no
driver changes are needed.
3. Allow setting affinity on non wake-up external GPIO interrupts.
-----BEGIN PGP SIGNATURE-----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=hlN6
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.8
1. New hardware: Add pin controllers for Samsung ExynosAutov920 and
Google Tensor GS101.
2. Few DT bindings cleanups: add specific compatibles for each device
using generic compatible as fallback. This affects only DTS, no
driver changes are needed.
3. Allow setting affinity on non wake-up external GPIO interrupts.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pinmux groups, power source, and input/output enable support for
Ethernet pins on RZ/G2L SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZXxCWwAKCRCKwlD9ZEnx
cGH/APsEC7rILFNMeP4o25rQHbqf/xIx+6KBZIXjH+ia+4uFJwEAkljmLIupZ7BB
L3QlxtdIk87wvzh5ZLfL9g4IK+ig2gk=
=5+7i
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.8 (take two)
- Add pinmux groups, power source, and input/output enable support for
Ethernet pins on RZ/G2L SoCs,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add bindings for Qualcomm X1E80100 SoC Low Power Audio SubSystem (LPASS)
WSA macro codec, which looks like compatible with earlier SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211123104.72963-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm X1E80100 SoC Low Power Audio SubSystem (LPASS)
VA macro codec, which looks like compatible with earlier SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211123104.72963-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm X1E80100 SoC Low Power Audio SubSystem (LPASS)
TX macro codec, which looks like compatible with earlier SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211123104.72963-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm X1E80100 SoC Low Power Audio SubSystem (LPASS)
RX macro codec, which looks like compatible with earlier SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211123104.72963-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix few trivial code style issues, pointed out by checkpatch, so they do
not get copied to new code (when old code is used as template):
WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
WARNING: function definition argument 'struct platform_device *' should also have an identifier name
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: Missing a blank line after declarations
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100048.211800-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some components like platforms don't have DAIs. If the active count of
these components is ignored pinctrl may be wrongly selected between
default and sleep state. So need to increment or decrement the active
count for components without DAIs to avoid it.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20231204111532.3165-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document bindings for the Qualcomm X1E80100 SoC sound card. The
bindings are the same as for other newer Qualcomm ADSP sound cards, thus
keep them in existing qcom,sm8250.yaml file, even though Linux driver is
separate.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20231204100116.211898-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sound machine driver for the soundcards on Qualcomm X1E80100 SoC,
supporting up to four channel audio playback over Soundwire bus. The
driver is based on existing sc8280xp.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100116.211898-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable support for dual MAX98390 amplifiers on the mt8188-rt5682s board.
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Link: https://msgid.link/r/20231212123050.4080083-5-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To use ES8326 as the codec, add a new sound card
named mt8186_es8326.
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20231212123050.4080083-4-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reduce code duplication, unify the headset codec init/exit api.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Link: https://msgid.link/r/20231212123050.4080083-3-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "mediatek,mt8188-es8326" to support new board
with es8326 codec.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Link: https://msgid.link/r/20231212123050.4080083-2-zhourui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a MODULE_DESCRIPTION() in the generic ACP machine driver to avoid
the following warning when building with W=1:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/acp/snd-acp-mach.o
Fixes: d4c750f2c7 ("ASoC: amd: acp: Add generic machine driver support for ACP cards")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing MODULE_DESCRIPTION() to avoid the following warning when
building with W=1:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/amd/snd-acp-config.o
Fixes: f1bdd8d385 ("ASoC: amd: Add module to determine ACP configuration")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the old SET_{RUNTIME,SYSTEM_SLEEP}_PM_OPS() helpers with their
modern alternatives and drop the now unnecessary __maybe_unused
qualifier in the suspend and resume functions.
Additionally, make use of pm_ptr() to ensure the PM ops are dropped when
building with CONFIG_PM disabled.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config
flags in vangogh platform"), the Vangogh ACP PCI driver could not be used
anymore for boards which happen to have a matching entry in acp-config
list.
Commit f18818eb0d ("ASoC: amd: vangogh: Add condition check for acp
config flag") slightly changed the behaviour to permit loading the
driver if AMD_LEGACY flag is set. However, for AMD_SOF flag the probing
is still denied, even if SOF support is disabled in kernel
configuration.
While this helps preventing conflicts between SOF and generic ACP
drivers, there are cases where a fallback to the generic non-SOF support
would still be needed or useful, e.g. SOF firmware is not available or
doesn't work properly, SOF driver is broken or doesn't provide full
support for a particular hardware, or simply for testing/debugging the
alternative solution. A real-life example is Steam Deck OLED, which
works with both drivers.
Prevent returning from probe() when ACP config indicates SOF support for
the current board *and* the Vangogh SOF driver is not enabled in kernel
configuration.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Vangogh machine driver variant based on the MAX98388 amplifier, as
found on Valve's Steam Deck OLED, relies on probing via an ACPI match
table. This worked fine until commit 197b1f7f0d ("ASoC: amd: Add new
dmi entries to config entry") enabled SOF support for the target machine
(i.e. Galileo product), causing the sound card to enter the deferred
probe state indefinitely:
$ cat /sys/kernel/debug/devices_deferred
AMDI8821:00 acp5x_mach: Register card (acp5x-max98388) failed
The issue is related to commit e89f45edb7 ("ASoC: amd: vangogh: Add
check for acp config flags in vangogh platform"), which tries to
mitigate potential conflicts between SOF and generic ACP Vangogh
drivers, due to sharing the PCI device IDs.
However, the solution is effective only if the machine driver is
directly probed by pci-acp5x through platform_device_register_full().
Hence, remove the conflicting ACPI based probing and rely exclusively on
DMI quirks for sound card setup.
Fixes: dba22efd0d ("ASoC: amd: vangogh: Add support for NAU8821/MAX98388 variant")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Tegra20 AC97 driver is using the legacy GPIO APIs in
<linux/of_gpio.h> and <linux/gpio.h> to obtain GPIOs for reset
and sync.
Convert it over and fix the polarity error on the RESET line
in the process: this reset line is clearly active low. Just
fix the one in-tree device tree site using it at the same
time.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20231214-gpio-descriptors-sound-misc-v1-4-e3004176bd8b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>