Qcom SoCs doesn't support the legacy PCI, but only PCIe. So use the correct
node name for the controller instances.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231206135540.17068-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qcom SoCs doesn't support the legacy PCI, but only PCIe. So use the correct
node name for the controller instances.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231206135540.17068-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sparse reports the following:
% ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make C=2 W=1 drivers/soc/qcom/pmic_pdcharger_ulog.o
...
CC drivers/soc/qcom/pmic_pdcharger_ulog.o
CHECK drivers/soc/qcom/pmic_pdcharger_ulog.c
drivers/soc/qcom/pmic_pdcharger_ulog.c:57:34: warning: incorrect type in initializer (different base types)
drivers/soc/qcom/pmic_pdcharger_ulog.c:57:34: expected restricted __le32 [usertype] owner
drivers/soc/qcom/pmic_pdcharger_ulog.c:57:34: got int
drivers/soc/qcom/pmic_pdcharger_ulog.c:58:33: warning: incorrect type in initializer (different base types)
drivers/soc/qcom/pmic_pdcharger_ulog.c:58:33: expected restricted __le32 [usertype] type
drivers/soc/qcom/pmic_pdcharger_ulog.c:58:33: got int
drivers/soc/qcom/pmic_pdcharger_ulog.c:59:35: warning: incorrect type in initializer (different base types)
drivers/soc/qcom/pmic_pdcharger_ulog.c:59:35: expected restricted __le32 [usertype] opcode
drivers/soc/qcom/pmic_pdcharger_ulog.c:59:35: got int
Let's deal with endianness conversion in the rare case this ever runs
on a big-endian machine (and to quiet down sparse for this file).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312060355.M0eJtq4X-lkp@intel.com/
Fixes: 086fdb48bc ("soc: qcom: add ADSP PDCharger ULOG driver")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231205-pmicpdcharger-ulog-fixups-v1-3-71c95162cb84@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As specified in samples/trace_events/trace-events-sample.h:
* Notice that TRACE_SYSTEM should be defined outside of #if
* protection, just like TRACE_INCLUDE_FILE.
Fixes: 086fdb48bc ("soc: qcom: add ADSP PDCharger ULOG driver")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231205-pmicpdcharger-ulog-fixups-v1-2-71c95162cb84@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As specified in samples/trace_events/Makefile:
If you include a trace header outside of include/trace/events
then the file that does the #define CREATE_TRACE_POINTS must
have that tracer file in its main search path. This is because
define_trace.h will include it, and must be able to find it from
the include/trace directory.
Without this the following compilation error is seen:
CC drivers/soc/qcom/pmic_pdcharger_ulog.o
In file included from drivers/soc/qcom/pmic_pdcharger_ulog.h:36,
from drivers/soc/qcom/pmic_pdcharger_ulog.c:15:
./include/trace/define_trace.h:95:42: fatal error: ./pmic_pdcharger_ulog.h: No such file or directory
95 | #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
| ^
compilation terminated.
Fixes: 086fdb48bc ("soc: qcom: add ADSP PDCharger ULOG driver")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231205-pmicpdcharger-ulog-fixups-v1-1-71c95162cb84@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This laptop has two i2s speakers; an i2s audio codec for the headset
jack; two DMIC microphones in the lid and the displayport audio channel.
This commit adds the audio node that describes all of the above with the
exception of the DMICs that require in-SoC digital codec to be brought
up, which will be done later.
Note that the displayport channel is connected here for completeness,
but the displayport can't be used yet since the HPD signal is created by
the embedded controller, which will be added later.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-3-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When initially added, a mistake was made in the definition of the codec.
Despite the fact that the DMIC line is connected on the side of the
codec chip, and relevant passive components, including 0-ohm resistors
connecting the dmics, are present, the dmic line is still cut in
another place on the board, which was overlooked.
Correct this by replacing the dmic configuration with a comment
describing this hardware detail.
While at it, also add missing regulators definitions. This is not a
functional change as all the relevant regulators were already added via
the other rail supplies.
Fixes: 4a9f8f8f2a ("arm64: dts: qcom: Add Acer Aspire 1")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-2-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
pm6150 has a read-only RTC that can be used to keep the time with some
extra userspace tools. Enable it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-1-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support to get image details from SMEM for DSPs like
DSPS (Sensors DSP), CDSP (Compute DSP), GPDSP (General purpose DSP)
while also supporting this for more than one DSP of certain types.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Link: https://lore.kernel.org/r/20231205101018.6079-1-quic_namajain@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the GPU and provide a path for the ZAP blob.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-4-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the required nodes to support the A740 GPU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-3-2a437588e563@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.
Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L866-872
Cc: stable@vger.kernel.org # 6.5
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-2-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.
Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472
Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb1031 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Looks like not all firmware versions used for MSM8939 program the timer
frequency for both broadcast/MMIO timers, causing a WARNING at runtime:
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:38 cev_delta2ns+0x74/0x90
pc : cev_delta2ns+0x74/0x90
lr : clockevents_config.part.0+0x64/0x8c
Call trace:
cev_delta2ns+0x74/0x90
clockevents_config_and_register+0x20/0x34
arch_timer_mem_of_init+0x374/0x534
timer_probe+0x88/0x110
time_init+0x14/0x4c
start_kernel+0x2c0/0x640
Unfortunately there is no way to fix the firmware on most of these
devices since it's proprietary and signed. As a workaround, specify the
clock-frequency explicitly in the DT to fix the warning.
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Reported-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8939-timer-v1-1-a2486c625786@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add node to support the QUP5 SPI controller inside of IPQ6018.
Some routers use this bus to connect SPI TPM chips.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203154003.532765-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add node to support all the QUP UART node controller inside of IPQ6018.
Some routers use these bus to connect Bluetooth chips.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203153914.532654-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add runtime PM support to ensure the supply rails are enabled
when necessary.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-4-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the driver was ported upstream, PLL test_ctl_hi1 register value
was omitted. Add it to ensure the PLLs are fully configured.
Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add all the available resets for the video clock controller
on sm8150.
Fixes: 5658e8cf1a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-2-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add all the available resets for the video clock controller
on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable global clock controller and pinctrl for support the Qualcomm
SM4450 platform to boot to UART console.
The serial engine depends on some global clock controller and pinctrl, but
as the serial console driver is only available as built-in, so the global
clock controller and pinctrl also needs be built-in for the UART device to
probe and register the console.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-7-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Arm CMN perf: fix the DTC allocation failure path which can end up
erroneously clearing live counters
- arm64/mm: fix hugetlb handling of the dirty page state leading to a
continuous fault loop in user on hardware without dirty bit management
(DBM). That's caused by the dirty+writeable information not being
properly preserved across a series of mprotect(PROT_NONE),
mprotect(PROT_READ|PROT_WRITE)
-----BEGIN PGP SIGNATURE-----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=wq2L
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Arm CMN perf: fix the DTC allocation failure path which can end up
erroneously clearing live counters
- arm64/mm: fix hugetlb handling of the dirty page state leading to a
continuous fault loop in user on hardware without dirty bit
management (DBM). That's caused by the dirty+writeable information
not being properly preserved across a series of mprotect(PROT_NONE),
mprotect(PROT_READ|PROT_WRITE)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
perf/arm-cmn: Fail DTC counter allocation correctly
-----BEGIN PGP SIGNATURE-----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=4BWR
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Limit Max_Read_Request_Size (MRRS) on some MIPS Loongson systems
because they don't all support MRRS > 256, and firmware doesn't
always initialize it correctly, which meant some PCIe devices didn't
work (Jiaxun Yang)
- Add and use pci_enable_link_state_locked() to prevent potential
deadlocks in vmd and qcom drivers (Johan Hovold)
- Revert recent (v6.5) acpiphp resource assignment changes that fixed
issues with hot-adding devices on a root bus or with large BARs, but
introduced new issues with GPU initialization and hot-adding SCSI
disks in QEMU VMs and (Bjorn Helgaas)
* tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert
PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter
PCI: qcom: Clean up ASPM comment
PCI: qcom: Fix potential deadlock when enabling ASPM
PCI: vmd: Fix potential deadlock when enabling ASPM
PCI/ASPM: Add pci_enable_link_state_locked()
PCI: loongson: Limit MRRS to 256
XFS stores quota records and free space bitmap information in files.
Add the necessary infrastructure to enable repairing metadata inodes and
their forks, and then make it so that we can repair the file metadata
for the rtbitmap. Repairing the bitmap contents (and the summary file)
is left for subsequent patchsets.
We also add the ability to repair file metadata the quota files. As
part of these repairs, we also reinitialize the ondisk dquot records as
necessary to get the incore dquots working. We can also correct
obviously bad dquot record attributes, but we leave checking the
resource usage counts for the next patchsets.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKBAAKCRBKO3ySh0YR
pq7JAPwM5CRyw09Ys4iy1QO3iX6y4awKVONO/qIWKzGi56RRggEAoDYNXtx8Kvd8
gQS/PdrDBdQrwdu5W2stUyPt6xPxqwM=
=DNHN
-----END PGP SIGNATURE-----
Merge tag 'repair-quota-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB
xfs: online repair of quota and rt metadata files
XFS stores quota records and free space bitmap information in files.
Add the necessary infrastructure to enable repairing metadata inodes and
their forks, and then make it so that we can repair the file metadata
for the rtbitmap. Repairing the bitmap contents (and the summary file)
is left for subsequent patchsets.
We also add the ability to repair file metadata the quota files. As
part of these repairs, we also reinitialize the ondisk dquot records as
necessary to get the incore dquots working. We can also correct
obviously bad dquot record attributes, but we leave checking the
resource usage counts for the next patchsets.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-quota-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: repair quotas
xfs: improve dquot iteration for scrub
xfs: check dquot resource timers
xfs: check the ondisk space mapping behind a dquot
Add in the necessary infrastructure to check the inode and data forks of
metadata files, then apply that to the realtime bitmap file. We won't
be able to reconstruct the contents of the rtbitmap file until rmapbt is
added for realtime volumes, but we can at least get the basics started.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
pilcAP9Zuwcc01Wsll9bWHEOLVPmZbGkatLQfq3kx1f0AjIJ2gEArPaKRfNNwLdY
lxCgSdJbCFBKW1oQR+k+W07Om7d3Zww=
=B5sk
-----END PGP SIGNATURE-----
Merge tag 'repair-rtbitmap-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB
xfs: online repair of rt bitmap file
Add in the necessary infrastructure to check the inode and data forks of
metadata files, then apply that to the realtime bitmap file. We won't
be able to reconstruct the contents of the rtbitmap file until rmapbt is
added for realtime volumes, but we can at least get the basics started.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-rtbitmap-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: online repair of realtime bitmaps
xfs: create a new inode fork block unmap helper
xfs: repair the inode core and forks of a metadata inode
xfs: always check the rtbitmap and rtsummary files
xfs: check rt summary file geometry more thoroughly
xfs: check rt bitmap file geometry more thoroughly
In this series, online repair gains the ability to rebuild data and attr
fork mappings from the reverse mapping information. It is at this point
where we reintroduce the ability to reap file extents.
Repair of CoW forks is a little different -- on disk, CoW staging
extents are owned by the refcount btree and cannot be mapped back to
individual files. Hence we can only detect staging extents that don't
quite look right (missing reverse mappings, shared staging extents) and
replace them with fresh allocations.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
prEyAP95FTXnn0pe08gcyzICmcnMM762VNleDRawhAj+LU2J4AEAj4eOC5AelmYo
MHwdRYJzug539fliCF8m6a+id+aeCQo=
=cONL
-----END PGP SIGNATURE-----
Merge tag 'repair-file-mappings-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB
xfs: online repair of file fork mappings
In this series, online repair gains the ability to rebuild data and attr
fork mappings from the reverse mapping information. It is at this point
where we reintroduce the ability to reap file extents.
Repair of CoW forks is a little different -- on disk, CoW staging
extents are owned by the refcount btree and cannot be mapped back to
individual files. Hence we can only detect staging extents that don't
quite look right (missing reverse mappings, shared staging extents) and
replace them with fresh allocations.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-file-mappings-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: repair problems in CoW forks
xfs: create a ranged query function for refcount btrees
xfs: refactor repair forcing tests into a repair.c helper
xfs: repair inode fork block mapping data structures
xfs: reintroduce reaping of file metadata blocks to xrep_reap_extents
In this series, online repair gains the ability to repair inode records.
To do this, we must repair the ondisk inode and fork information enough
to pass the iget verifiers and hence make the inode igettable again.
Once that's done, we can perform higher level repairs on the incore
inode. The fstests counterpart of this patchset implements stress
testing of repair.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
ppnbAP9zh9hc4Lr+3EMMZMsFXNxScP8iV7kCmHoorgMhHI9z8AEApBxkILxLjbwC
TJtoSmbnBhQWXR/my0MBPpLgD7v3ugk=
=lwKw
-----END PGP SIGNATURE-----
Merge tag 'repair-inodes-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB
xfs: online repair of inodes and forks
In this series, online repair gains the ability to repair inode records.
To do this, we must repair the ondisk inode and fork information enough
to pass the iget verifiers and hence make the inode igettable again.
Once that's done, we can perform higher level repairs on the incore
inode. The fstests counterpart of this patchset implements stress
testing of repair.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-inodes-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: skip the rmapbt search on an empty attr fork unless we know it was zapped
xfs: abort directory parent scrub scans if we encounter a zapped directory
xfs: zap broken inode forks
xfs: repair inode records
xfs: set inode sick state flags when we zap either ondisk fork
xfs: dont cast to char * for XFS_DFORK_*PTR macros
xfs: add missing nrext64 inode flag check to scrub
xfs: try to attach dquots to files before repairing them
xfs: disable online repair quota helpers when quota not enabled
Now that we've spent a lot of time reworking common code in online fsck,
we're ready to start rebuilding the AG space btrees. This series
implements repair functions for the free space, inode, and refcount
btrees. Rebuilding the reverse mapping btree is much more intense and
is left for a subsequent patchset. The fstests counterpart of this
patchset implements stress testing of repair.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
pkAeAQCM8fCc4T777ZOSE+RchXESmXeIKX3fAtgqTFa5dumauAEA1CSgTHnCASmL
9K5zdFwRyH2jFeFrxCMAqwNn+X2Z0gg=
=Cv+u
-----END PGP SIGNATURE-----
Merge tag 'repair-ag-btrees-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB
xfs: online repair of AG btrees
Now that we've spent a lot of time reworking common code in online fsck,
we're ready to start rebuilding the AG space btrees. This series
implements repair functions for the free space, inode, and refcount
btrees. Rebuilding the reverse mapping btree is much more intense and
is left for a subsequent patchset. The fstests counterpart of this
patchset implements stress testing of repair.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-ag-btrees-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: repair refcount btrees
xfs: repair inode btrees
xfs: repair free space btrees
xfs: remove trivial bnobt/inobt scrub helpers
xfs: roll the scrub transaction after completing a repair
xfs: move the per-AG datatype bitmaps to separate files
xfs: create separate structures and code for u32 bitmaps
Before we start merging the online repair functions, let's improve the
bulk loading code a bit. First, we need to fix a misinteraction between
the AIL and the btree bulkloader wherein the delwri at the end of the
bulk load fails to queue a buffer for writeback if it happens to be on
the AIL list.
Second, we introduce a defer ops barrier object so that the process of
reaping blocks after a repair cannot queue more than two extents per EFI
log item. This increases our exposure to leaking blocks if the system
goes down during a reap, but also should prevent transaction overflows,
which result in the system going down.
Third, we change the bulkloader itself to copy multiple records into a
block if possible, and add some debugging knobs so that developers can
control the slack factors, just like they can do for xfs_repair.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXzKAwAKCRBKO3ySh0YR
pkcvAP0SEt4VLGrWQJqlWZ5e4sWnqDqVPyT/CQMvG86Qm9VcYwEAzbE0/DaA7uN0
DnceMdho49kTo6FC7+z/lQyGKbl89As=
=8FAT
-----END PGP SIGNATURE-----
Merge tag 'repair-prep-for-bulk-loading-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeB
xfs: prepare repair for bulk loading
Before we start merging the online repair functions, let's improve the
bulk loading code a bit. First, we need to fix a misinteraction between
the AIL and the btree bulkloader wherein the delwri at the end of the
bulk load fails to queue a buffer for writeback if it happens to be on
the AIL list.
Second, we introduce a defer ops barrier object so that the process of
reaping blocks after a repair cannot queue more than two extents per EFI
log item. This increases our exposure to leaking blocks if the system
goes down during a reap, but also should prevent transaction overflows,
which result in the system going down.
Third, we change the bulkloader itself to copy multiple records into a
block if possible, and add some debugging knobs so that developers can
control the slack factors, just like they can do for xfs_repair.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-prep-for-bulk-loading-6.8_2023-12-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: constrain dirty buffers while formatting a staged btree
xfs: move btree bulkload record initialization to ->get_record implementations
xfs: add debug knobs to control btree bulk load slack factors
xfs: read leaf blocks when computing keys for bulkloading into node blocks
xfs: set XBF_DONE on newly formatted btree block that are ready for writing
xfs: force all buffers to be written during btree bulk load
Eric Dumazet says:
====================
tcp/dccp: refine source port selection
This patch series leverages IP_LOCAL_PORT_RANGE option
to no longer favor even source port selection at connect() time.
This should lower time taken by connect() for hosts having
many active connections to the same destination.
====================
Link: https://lore.kernel.org/r/20231214192939.1962891-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 1580ab63fc ("tcp/dccp: better use of ephemeral ports in connect()")
we added an heuristic to select even ports for connect() and odd ports for bind().
This was nice because no applications changes were needed.
But it added more costs when all even ports are in use,
when there are few listeners and many active connections.
Since then, IP_LOCAL_PORT_RANGE has been added to permit an application
to partition ephemeral port range at will.
This patch extends the idea so that if IP_LOCAL_PORT_RANGE is set on
a socket before accept(), port selection no longer favors even ports.
This means that connect() can find a suitable source port faster,
and applications can use a different split between connect() and bind()
users.
This should give more entropy to Toeplitz hash used in RSS: Using even
ports was wasting one bit from the 16bit sport.
A similar change can be done in inet_csk_find_open_port() if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change inet_sk_get_local_port_range() to return a boolean,
telling the callers if the port range was provided by
IP_LOCAL_PORT_RANGE socket option.
Adds documentation while we are at it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>