The timeslots checked in qmc_check_chans() are the timeslots used.
With the introduction of the available timeslots, the used timeslots
are a subset of the available timeslots. The timeslots checked during
the qmc_check_chans() call should be the available ones.
Simply update and check the available timeslots instead of the used
timeslots in qmc_check_chans().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-12-herve.codina@bootlin.com
The newly introduced qmc_chan_setup_tsa* functions check that the
channel entries are not already used.
These checks are also performed by qmc_check_chans() and are no more
needed.
Remove them from qmc_check_chans().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-11-herve.codina@bootlin.com
Introduce the qmc_chan_setup_tsa* functions to setup entries related
to the given channel.
Use them during QMC channels setup.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-10-herve.codina@bootlin.com
qmc_setup_tsa* are called once at initialisation.
They initialize the QMC TSA table.
In order to introduce setup function later on for dynamic timeslots
management, rename the function to avoid later confusion.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-9-herve.codina@bootlin.com
Available timeslots masks define timeslots available for the related
channel. These timeslots are defined by the QMC binding.
Timeslots used are initialized to available timeslots but can be a
subset of available timeslots.
This prepares the dynamic timeslots management (ie. changing timeslots
at runtime).
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-8-herve.codina@bootlin.com
QMC child devices support is needed to avoid orphan DT nodes that use a
simple DT phandle to reference a QMC channel.
Allow to instantiate child devices and also extend the API to get the
qmc_chan using a child device.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231205152116.122512-7-herve.codina@bootlin.com
The inline function specifier is present on some functions but it is
better to let the compiler decide inlining or not these functions.
Remove inline specifiers.
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-6-herve.codina@bootlin.com
In HDLC mode, some status flags related to the data read transfer can be
set by the hardware and need to be known by a QMC consumer for further
analysis.
Extend the API in order to provide these transfer status flags at the
read complete() call.
In TRANSPARENT mode, these flags have no meaning. Keep only one read
complete() API and update the consumers working in transparent mode.
In this case, the newly introduced flags parameter is simply unused.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com
The qmc_chan_reset_rx() set the is_rx_stopped flag. This leads to an
inconsistent state in the following sequence.
qmc_chan_stop()
qmc_chan_reset()
Indeed, after the qmc_chan_reset() call, the channel must still be
stopped. Only a qmc_chan_start() call can move the channel from stopped
state to started state.
Fix the issue removing the is_rx_stopped flag setting from
qmc_chan_reset()
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-4-herve.codina@bootlin.com
Running sparse (make C=1) on qmc.c raises a lot of warning such as:
...
warning: incorrect type in assignment (different address spaces)
expected struct cpm_buf_desc [usertype] *[noderef] __iomem bd
got struct cpm_buf_desc [noderef] [usertype] __iomem *txbd_free
...
Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.
Use the correct declaration to remove these warnings.
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-3-herve.codina@bootlin.com
Running sparse (make C=1) on tsa.c raises a lot of warning such as:
--- 8< ---
warning: incorrect type in assignment (different address spaces)
expected void *[noderef] si_regs
got void [noderef] __iomem *
--- 8< ---
Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.
Use the correct declaration to remove these warnings.
Fixes: 1d4ba0b81c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312051959.9YdRIYbg-lkp@intel.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-2-herve.codina@bootlin.com
For some reason, the Arm DSU PMU driver uses kerneldoc-style comment
syntax (i.e. /** ) for non-kerneldoc comments. This makes the robots
very angry indeed, so just revert these to normal comments to stop
the noise.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312092000.8ltwotjt-lkp@intel.com/
Signed-off-by: Will Deacon <will@kernel.org>
This API was defined to formalize the access to internal iommu details on
some Tegra SOCs, but a few callers got missed. Add them.
The helper already masks by 0xFFFF so remove this code from the callers.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A perfect driver would only call dev_iommu_priv_set() from its probe
callback. We've made it functionally correct to call it from the of_xlate
by adding a lock around that call.
lockdep assert that iommu_probe_device_lock is held to discourage misuse.
Exclude PPC kernels with CONFIG_FSL_PAMU turned on because FSL_PAMU uses a
global static for its priv and abuses priv for its domain.
Remove the pointless stores of NULL, all these are on paths where the core
code will free dev->iommu after the op returns.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allocation of dev->iommu must be done under the
iommu_probe_device_lock. Mark this with lockdep to discourage future
mistakes.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of returning 1 and trying to handle positive error codes just
stick to the convention of returning -ENODEV. Remove references to ops
from of_iommu_configure(), a NULL ops will already generate an error code.
There is no reason to check dev->bus, if err=0 at this point then the
called configure functions thought there was an iommu and we should try to
probe it. Remove it.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is not being used to pass ops, it is just a way to tell if an
iommu driver was probed. These days this can be detected directly via
device_iommu_mapped(). Call device_iommu_mapped() in the two places that
need to check it and remove the iommu parameter everywhere.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit a9c362db39 ("iommu: Validate that devices match domains") added
an owner token to the iommu_domain. This token is checked during domain
attachment to RID or PASID through the generic iommu interfaces.
The SVA domains are attached to PASIDs through those iommu interfaces.
Therefore, they require the owner token to be set during allocation.
Otherwise, they fail to attach.
Set the owner token for SVA domains.
Fixes: a9c362db39 ("iommu: Validate that devices match domains")
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231208015314.320663-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee802_11_parse_elems() can return NULL, so we must
check for the return value.
Fixes: 5d24828d05 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.93dea364f3d3.Ie87781c6c48979fb25a744b90af4a33dc2d83a28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need to check that cfg80211_defragment_element()
didn't return an error, since it can fail due to bad
input, and we didn't catch that before.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.8595a6b67fc0.I1225edd8f98355e007f96502e358e476c7971d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we're doing reconfig, then we cannot add the debugfs
files that are already there from before the reconfig.
Skip that in drv_change_sta_links() during reconfig.
Fixes: d2caad527c ("wifi: mac80211: add API to show the link STAs in debugfs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.88a950f43e16.Id71181780994649219685887c0fcad33d387cc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.
This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.
Fixes: b2f750c3a8 ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq->lock as well.
Fixes: 25edc8f259 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drop the pasid field, as all the information needed for sva domain
management has been moved to the newly added iommu_mm field.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-7-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Each mm bound to devices gets a PASID and corresponding sva domains
allocated in iommu_sva_bind_device(), which are referenced by iommu_mm
field of the mm. The PASID is released in __mmdrop(), while a sva domain
is released when no one is using it (the reference count is decremented
in iommu_sva_unbind_device()). However, although sva domains and their
PASID are separate objects such that their own life cycles could be
handled independently, an enqcmd use case may require releasing the
PASID in releasing the mm (i.e., once a PASID is allocated for a mm, it
will be permanently used by the mm and won't be released until the end
of mm) and only allows to drop the PASID after the sva domains are
released. To this end, mmgrab() is called in iommu_sva_domain_alloc() to
increment the mm reference count and mmdrop() is invoked in
iommu_domain_free() to decrement the mm reference count.
Since the required info of PASID and sva domains is kept in struct
iommu_mm_data of a mm, use mm->iommu_mm field instead of the old pasid
field in mm struct. The sva domain list is protected by iommu_sva_lock.
Besides, this patch removes mm_pasid_init(), as with the introduced
iommu_mm structure, initializing mm pasid in mm_init() is unnecessary.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-6-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce iommu_mm_data structure to keep sva information (pasid and the
related sva domains). Add iommu_mm pointer, pointing to an instance of
iommu_mm_data structure, to mm.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-5-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mm_get_enqcmd_pasid() should be used by architecture code and closely
related to learn the PASID value that the x86 ENQCMD operation should
use for the mm.
For the moment SMMUv3 uses this without any connection to ENQCMD, it
will be cleaned up similar to how the prior patch made VT-d use the
PASID argument of set_dev_pasid().
The motivation is to replace mm->pasid with an iommu private data
structure that is introduced in a later patch.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-4-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid is passed in as a parameter through .set_dev_pasid() callback.
Thus, intel_sva_bind_mm() can directly use it instead of retrieving the
pasid value from mm->pasid.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-3-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Linus suggested that the kconfig here is confusing:
https://lore.kernel.org/all/CAHk-=wgUiAtiszwseM1p2fCJ+sC4XWQ+YN4TanFhUgvUqjr9Xw@mail.gmail.com/
Let's break it into three kconfigs controlling distinct things:
- CONFIG_IOMMU_MM_DATA controls if the mm_struct has the additional
fields for the IOMMU. Currently only PASID, but later patches store
a struct iommu_mm_data *
- CONFIG_ARCH_HAS_CPU_PASID controls if the arch needs the scheduling bit
for keeping track of the ENQCMD instruction. x86 will select this if
IOMMU_SVA is enabled
- IOMMU_SVA controls if the IOMMU core compiles in the SVA support code
for iommu driver use and the IOMMU exported API
This way ARM will not enable CONFIG_ARCH_HAS_CPU_PASID
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-2-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Usual mixed bunch of driver bugs. The core bug probably isn't hit
with upstream drivers, but good to get fix in place anyway.
iio-core
- Fix potential freeing of wrong iio buffer when multiple buffers used.
adi,adis16475
- Add missing spi_device_id table need for module auto-loading
- Fix untended BIT(BIT()) due to wrong macro definitions.
amlogic,meson
- Add a chip specific config for AXG soc familly which needs
a vref_select to work.
freescale,mp6050
- Fix eating of error code on failure to read from sensor.
kionixq,kx022a
- Fix scaling to comply with ABI (m/s^2 rather than micro m/s^2)
measspec,ms_sensors
- Fix wrong conversion times due to strange value mapping.
microchip,mcp3564
- Fix previously impossible to fail check on limits.
- Fix identification logic.
nxp,imx93
- Add missing channels for i.mx95.
ti,am335x
- Fix handling of error for tiadc_request_dma().
ti,tmag5273
- Fix incorrect temperature offset.
-----BEGIN PGP SIGNATURE-----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=KeZH
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
First set of IIO fixes for the 6.7 cycle.
Usual mixed bunch of driver bugs. The core bug probably isn't hit
with upstream drivers, but good to get fix in place anyway.
iio-core
- Fix potential freeing of wrong iio buffer when multiple buffers used.
adi,adis16475
- Add missing spi_device_id table need for module auto-loading
- Fix untended BIT(BIT()) due to wrong macro definitions.
amlogic,meson
- Add a chip specific config for AXG soc familly which needs
a vref_select to work.
freescale,mp6050
- Fix eating of error code on failure to read from sensor.
kionixq,kx022a
- Fix scaling to comply with ABI (m/s^2 rather than micro m/s^2)
measspec,ms_sensors
- Fix wrong conversion times due to strange value mapping.
microchip,mcp3564
- Fix previously impossible to fail check on limits.
- Fix identification logic.
nxp,imx93
- Add missing channels for i.mx95.
ti,am335x
- Fix handling of error for tiadc_request_dma().
ti,tmag5273
- Fix incorrect temperature offset.
* tag 'iio-fixes-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
iio: kx022a: Fix acceleration value scaling
This contains fixes for reported issues. One fix is in framework code to
explicitly treat returned NULL nodes as error when the device-tree data
is translated into endpoint nodes.
The other two fixes are in driver code. One is expected to improve the
power consumption on the sm8250 platforms and the other one is fixing a
bandwidth calculation formula that was introduced during this cycle.
- interconnect: Treat xlate() returning NULL node as an error
- interconnect: qcom: sm8250: Enable sync_state
- interconnect: qcom: icc-rpm: Fix peak rate calculation
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XH0j
-----END PGP SIGNATURE-----
Merge tag 'icc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.7-rc
This contains fixes for reported issues. One fix is in framework code to
explicitly treat returned NULL nodes as error when the device-tree data
is translated into endpoint nodes.
The other two fixes are in driver code. One is expected to improve the
power consumption on the sm8250 platforms and the other one is fixing a
bandwidth calculation formula that was introduced during this cycle.
- interconnect: Treat xlate() returning NULL node as an error
- interconnect: qcom: sm8250: Enable sync_state
- interconnect: qcom: icc-rpm: Fix peak rate calculation
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: icc-rpm: Fix peak rate calculation
interconnect: qcom: sm8250: Enable sync_state
interconnect: Treat xlate() returning NULL node as an error
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmV26S0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xhrggAndnZ23OehAMs+Tl5usEm/9RE6Al2
M9i/P3s2uzBUg4cRTAY0BLsNHIg9zvLv8unrJ0xoPQuoV/vI0864PMLQ1miVyvIa
V99/Cz/eCH0wZp9ADE1dL7EYI76aj5TXGgAxExTJ3EKVg5j/jWMkLLrsMZNT/23Z
YDPcDEPpaAGaKmJf0sJd+TRMn5hyJCVmkre9CEXJGDaogsX0BJGIhJ3nA2GzAwQ+
1oMxlkzMoECQ3U5ilzRtdREvmZtO1mjwUmwGMDZBKGwEvm0B8CrxDGmQjjMJcqTW
a85EeS/C3q+U7Pexq6/Wkixmv2pIuNzbQ1SV0P+qky8lPd6Rzp2fSmnnOg==
=UXod
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into wireless-next
Merge the platform drivers tag for WRBF. Hans says:
Immutable branch between pdx86 amd wbrf branch and wifi / amdgpu due for the v6.8 merge window
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
Merge it so we can apply the wifi tie-in for this feature.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Releasing the `priv->lock` while iterating the `priv->multicast_list` in
`ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to
remove the items while in the middle of iteration. If the mcast is removed
while the lock was dropped, the for loop spins forever resulting in a hard
lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel):
Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below)
-----------------------------------+-----------------------------------
ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work)
spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...)
list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev)
&priv->multicast_list, list) |
ipoib_mcast_join(dev, mcast) |
spin_unlock_irq(&priv->lock) |
| spin_lock_irqsave(&priv->lock, flags)
| list_for_each_entry_safe(mcast, tmcast,
| &priv->multicast_list, list)
| list_del(&mcast->list);
| list_add_tail(&mcast->list, &remove_list)
| spin_unlock_irqrestore(&priv->lock, flags)
spin_lock_irq(&priv->lock) |
| ipoib_mcast_remove_list(&remove_list)
(Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast,
`priv->multicast_list` and we keep | remove_list, list)
spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done)
the other thread which is blocked |
and the list is still valid on |
it's stack.)
Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent
eventual sleeps.
Unfortunately we could not reproduce the lockup and confirm this fix but
based on the code review I think this fix should address such lockups.
crash> bc 31
PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2"
--
[exception RIP: ipoib_mcast_join_task+0x1b1]
RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002
RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000
work (&priv->mcast_task{,.work})
RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000
&mcast->list
RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000
R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00
mcast
R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8
dev priv (&priv->lock) &priv->multicast_list (aka head)
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
--- <NMI exception stack> ---
#5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib]
#6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967
crash> rx ff646f199a8c7e68
ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work
crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000
(empty)
crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000
mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>,
mcast_mutex.owner.counter = 0xff1c69998efec000
crash> b 8
PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0"
--
#3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646
#4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib]
#5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib]
#6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib]
#7 [ff646f1980153e98] process_one_work+0x1a7 at ffffffff9bf10967
crash> rx ff646f1980153e68
ff646f1980153e68: ff1c6a1a04dc83f0 <<< work = &priv->flush_light
crash> ipoib_dev_priv.flush_light.func,broadcast ff1c6a1a04dc8000
flush_light.func = 0xffffffffc0943820 <ipoib_ib_dev_flush_light>,
broadcast = 0x0,
The mcast(s) on the `remove_list` (the remaining part of the ex `priv->multicast_list`):
crash> list -s ipoib_mcast.done.done ipoib_mcast.list -H ff646f1980153e10 | paste - -
ff1c6a192bd0c200 done.done = 0x0,
ff1c6a192d60ac00 done.done = 0x0,
Reported-by: Yuya Fujita-bishamonten <fj-lsoft-rh-driver@dl.jp.fujitsu.com>
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Link: https://lore.kernel.org/all/20231212080746.1528802-1-neelx@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.
Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.
Fixes: 91535613b6 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Not all SC7280 devices ship with ChromeOS firmware. Other devices need
PAS for image authentication. That requires the predefined virtual
address ranges to be passed via scm calls. Define them to enable Venus
on non-CrOS SC7280 devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of having a comment indicating the need to hold slots_lock
when calling kvm_io_bus_register_dev(), make it explicit with
a lockdep assertion.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Although we implicitly depend on slots_lock being held when registering
IO devices with the IO bus infrastructure, we don't enforce this
requirement. Make it explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When failing to create a vcpu because (for example) it has a
duplicate vcpu_id, we destroy the vcpu. Amusingly, this leaves
the redistributor registered with the KVM_MMIO bus.
This is no good, and we should properly clean the mess. Force
a teardown of the vgic vcpu interface, including the RD device
before returning to the caller.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As we are going to need to call into kvm_vgic_vcpu_destroy() without
prior holding of the slots_lock, introduce __kvm_vgic_vcpu_destroy()
as a non-locking primitive of kvm_vgic_vcpu_destroy().
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When destroying a vgic, we have rather cumbersome rules about
when slots_lock and config_lock are held, resulting in fun
buglets.
The first port of call is to simplify kvm_vgic_map_resources()
so that there is only one call to kvm_vgic_destroy() instead of
two, with the second only holding half of the locks.
For that, we kill the non-locking primitive and move the call
outside of the locking altogether. This doesn't change anything
(we re-acquire the locks and teardown the whole vgic), and
simplifies the code significantly.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
These two series from Mark and Shun extend RDMA mlx5 API.
Mark's series provides c0 register used to match egress
traffic sent by local device.
Shun's series adds new type for ICM area.
Link: https://lore.kernel.org/all/cover.1701871118.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This patch introduces improvements for matching egress traffic sent by the
local device. When applicable, all egress traffic from the local vport is
now tagged with the provided value. This enhancement is particularly useful
for FDB steering purposes.
The primary focus of this update is facilitating the transmission of
traffic from the hypervisor to a VF. To achieve this, one must initiate an
SQ on the hypervisor and subsequently create a rule in the FDB that matches
on the eswitch manager vport and the SQN of the aforementioned SQ.
Obtaining the SQN can be had from SQ opened, and the eswitch manager vport
match can be substituted with the register c0 value exposed by this patch.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/aa4120a91c98ff1c44f1213388c744d4cb0324d6.1701871118.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>