Commit graph

1,264,895 commits

Author SHA1 Message Date
Colin Ian King
b6b2264ba2 iommu/apple-dart: Fix spelling mistake "grups" -> "groups"
There is a spelling mistake in a dev_err message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231209231240.4056082-1-colin.i.king@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:42:06 +01:00
Stuart Lee
b6961d187f drm/mediatek: Fix access violation in mtk_drm_crtc_dma_dev_get
Add error handling to check NULL input in
mtk_drm_crtc_dma_dev_get function.

While display path is not configured correctly, none of crtc is
established. So the caller of mtk_drm_crtc_dma_dev_get may pass
input parameter *crtc as NULL, Which may cause coredump when
we try to get the container of NULL pointer.

Fixes: cb1d6bcca5 ("drm/mediatek: Add dma dev get function")
Signed-off-by: Stuart Lee <stuart.lee@mediatek.com>
Cc: stable@vger.kernel.org
Reviewed-by: AngeloGioacchino DEl Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231110012914.14884-2-stuart.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-11 14:40:05 +00:00
Richard Fitzgerald
02a914ed47
ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
Change the ALSA prefix for the CS35L56 to "AMPn".

This keeps them consistent with the CS35L56 HDA driver. It also
avoids coding the chip ID into the control name, so that other
Cirrus amps with the same controls can have the same control
names.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 05fe628428 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c")
Link: https://msgid.link/r/20231205115715.2460386-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-11 14:27:46 +00:00
Vasant Hegde
c7fc12354b iommu/amd/pgtbl_v2: Invalidate updated page ranges only
Enhance __domain_flush_pages() to detect domain page table mode and use
that info to build invalidation commands. So that we can use
amd_iommu_domain_flush_pages() to invalidate v2 page table.

Also pass PASID, gn variable to device_flush_iotlb() so that it can build
IOTLB invalidation command for both v1 and v2 page table.

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:38 +01:00
Vasant Hegde
2c535dd37d iommu/amd: Make domain_flush_pages as global function
- Rename domain_flush_pages() -> amd_iommu_domain_flush_pages() and make
  it as global function.

- Rename amd_iommu_domain_flush_tlb_pde() -> amd_iommu_domain_flush_all()
  and make it as static.

- Convert v1 page table (io_pgtble.c) to use amd_iommu_domain_flush_pages().

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:37 +01:00
Vasant Hegde
8d004ac1c6 iommu/amd: Consolidate amd_iommu_domain_flush_complete() call
Call amd_iommu_domain_flush_complete() from domain_flush_pages().
That way we can remove explicit call of amd_iommu_domain_flush_complete()
from various places.

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:36 +01:00
Vasant Hegde
bbf85fe10f iommu/amd: Refactor device iotlb invalidation code
build_inv_iotlb_pages() and build_inv_iotlb_pasid() pretty much duplicates
the code. Enhance build_inv_iotlb_pages() to invalidate guest IOTLB as
well. And remove build_inv_iotlb_pasid() function.

Suggested-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:36 +01:00
Vasant Hegde
4f0a600799 iommu/amd: Refactor IOMMU tlb invalidation code
build_inv_iommu_pages() and build_inv_iommu_pasid() pretty much
duplicates the code. Hence enhance build_inv_iommu_pages() to
invalidate guest pages as well. And remove build_inv_iommu_pasid().

Suggested-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:35 +01:00
Vasant Hegde
cf62924daf iommu/amd: Add support to invalidate multiple guest pages
Current interface supports invalidating single page or entire guest
translation information for a single process address space.

IOMMU CMD_INV_IOMMU_PAGES and CMD_INV_IOTLB_PAGES commands supports
invalidating range of pages. Add support to invalidate multiple pages.

This is preparatory patch before consolidating host and guest
invalidation code into single function. Following patches will
consolidation tlb invalidation code.

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:35 +01:00
Vasant Hegde
a976da66e8 iommu/amd: Remove redundant passing of PDE bit
Current code always sets PDE bit in INVALIDATE_IOMMU_PAGES command.
Hence get rid of 'pde' variable across functions.

We can re-introduce this bit whenever its needed.

Suggested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:34 +01:00
Vasant Hegde
3f2571fed2 iommu/amd: Remove redundant domain flush from attach_device()
Domain flush was introduced in attach_device() path to handle kdump
scenario. Later init code was enhanced to handle kdump scenario where
it also takes care of flushing everything including TLB
(see early_enable_iommus()).

Hence remove redundant flush from attach_device() function.

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:34 +01:00
Vasant Hegde
af3263758b iommu/amd: Rename iommu_flush_all_caches() -> amd_iommu_flush_all_caches()
Rename function inline with driver naming convention.

No functional changes.

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231122090215.6191-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:25:33 +01:00
Suravee Suthikulpanit
57cdb720ea iommu/amd: Do not flush IRTE when only updating isRun and destination fields
According to the recent update in the AMD IOMMU spec [1], the IsRun and
Destination fields of the Interrupt Remapping Table Entry (IRTE) are not
cached by the IOMMU hardware.

Therefore, do not issue the INVALIDATE_INTERRUPT_TABLE command when
updating IRTE[IsRun] and IRTE[Destination] when IRTE[GuestMode]=1, which
should help improve IOMMU AVIC/x2AVIC performance.

References:
[1] AMD IOMMU Spec Revision (Rev 3.08-PUB)
(Link: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf)

Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20231017144236.8287-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-11 15:21:35 +01:00
Michal Simek
62361638ae dt-bindings: hwmon: Increase max number of io-channels
The Analog Monitoring System (AMS) defines 51 channels
(Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml)
that's why increase number to 51.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/5110a313a5ce52ce6d7b5cb6b08368d42063dc30.1701419691.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
159e459c01 hwmon: (dell-smm) Add Optiplex 7000 to fan control whitelist
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-10-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
e7caf3d1e8 hwmon: (dell-smm) Document the WMI SMM interface
Document the WMI SMM interface so that future developers
can better understand how it works.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20231123004820.50635-9-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
b7a4706f66 hwmon: (dell-smm) Add support for WMI SMM interface
Some Dell machines like the Dell Optiplex 7000 do not support
the legacy SMM interface, but instead expect all SMM calls
to be issued over a special WMI interface.
Add support for this interface so users can control the fans
on those machines.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-8-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
20bdeebc88 hwmon: (dell-smm) Introduce helper function for data init
In the future, multiple SMM calling backends will exist,
with each backend being required to initialize its data.
Introduce a helper function for this so the code necessary
to initialize dell_smm_data is not duplicated between
different backends.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-7-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
5aad36f43b hwmon: (dell-smm) Move config entries out of i8k_dmi_table
Currently, i8k_dmi_table contains both entries used for DMI
matching and entries used to override config options. This
does not allow for differentiating between "its safe to issue
raw SMM calls on this machine" and "its not safe to issue raw
SMM calls on this machine, but here are some config values".

Since future SMM backends will need to differentiate between
those two cases, move those config entries into a separate
table. i8k_dmi_table now serves as a general "its safe to issue
raw SMM calls" table.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
2615f1ee7f hwmon: (dell-smm) Move DMI config handling to module init
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables holding config data would
have to drop their __initconst attribute.
Prevent this by moving the config handling to module init.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-5-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
9848fcf431 hwmon: (dell-smm) Move whitelist handling to module init
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables used for whitelisting
features would have to drop their __initconst attribute.
Prevent this by moving the whitelist handling to module init.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
7fd2e1cac5 hwmon: (dell-smm) Move blacklist handling to module init
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables used for backlisting broken
features would have to drop their __initconst attribute.
Prevent this by moving the blacklist handling to module init.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Armin Wolf
744f7be393 hwmon: (dell-smm) Prepare for multiple SMM calling backends
Modern Dell machines support multiple ways to issue an SMM call.
Prepare support for those by introducing dell_smm_ops, which is
used by dell_smm_call() to perform a SMM call. Each SMM backend
needs to provide a dell_smm_ops structure.

Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
James Seo
c9ba592580 hwmon: (hp-wmi-sensors) Fix failure to load on EliteDesk 800 G6
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its
BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is
evidently a valid way of representing a WMI data item as far as the
Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from
loading.

This seems quite rare, but add support for such strings. Treating this as a
quirk pretty much means adding that support anyway.

Also clean up an oversight in update_numeric_sensor_from_wobj() in which
the result of hp_wmi_strdup() was being used without error checking.

Reported-by: Lukasz Stelmach <l.stelmach@samsung.com>
Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/
Tested-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Andy Shevchenko
f07f9d2467 hwmon: (tmp513) Use SI constants from units.h
MILLI and MICRO may be used in the driver to make code more robust
against possible miscalculations.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Andy Shevchenko
df989762bc hwmon: (tmp513) Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-3-andriy.shevchenko@linux.intel.com
[groeck: Fixed excessive line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Andy Shevchenko
5d9ad4e0fa hwmon: (tmp513) Don't use "proxy" headers
The driver uses math.h and not util_macros.h.

All the same for the kernel.h, replace it with what the driver is using.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Patrick Rudolph
24921dbd29 hwmon: (peci/dimmtemp) Bump timeout
The PECI CPU sensors are available as soon as the CPU is powered,
however the PECI DIMM sensors are available after DRAM has been
trained and thresholds have been written by host firmware.

The default timeout of 30 seconds isn't enough for modern multisocket
platforms utilizing DDR5 memory to bring up the memory and enable PECI
sensor data.
Bump the default timeout to 10 minutes in case the system starts
without cached DDR5 training data.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231130090422.2535542-1-patrick.rudolph@9elements.com
[groeck: List affected driver in patch subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Kees Cook
4265eb062a hwmon: (pc87360) Bounds check data->innr usage
Without visibility into the initializers for data->innr, GCC suspects
using it as an index could walk off the end of the various 14-element
arrays in data. Perform an explicit clamp to the array size. Silences
the following warning with GCC 12+:

../drivers/hwmon/pc87360.c: In function 'pc87360_update_device':
../drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
  341 |                                 data->in_max[i] = pc87360_read_value(data,
      |                                 ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
  342 |                                                   LD_IN, i,
      |                                                   ~~~~~~~~~
  343 |                                                   PC87365_REG_IN_MAX);
      |                                                   ~~~~~~~~~~~~~~~~~~~
../drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14
  209 |         u8 in_max[14];          /* Register value */
      |            ^~~~~~

Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231130200207.work.679-kees@kernel.org
[groeck: Added comment into code clarifying context]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:01 -08:00
Xing Tong Wu
8b3800256a hwmon: (nct6775) Fix fan speed set failure in automatic mode
Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.

Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Xing Tong Wu
ff629afe7f hwmon: (nct6775) Add support for 2 additional fan controls
The nct6116 has 2 additional PWM pins compared to the nct6106.
Extend the nct6106 PWM arrays to support the nct6116.

Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-2-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Javier Carrasco
16693c2725 ABI: sysfs-class-hwmon: document emergency/max/min temperature alarms
These attributes are widely used in the hwmon subsystem, but they still
must be documented.

Add tempY_emergency_alarm, tempY_max_alarm and tempY_min_alarm to the
ABI documentation according to their current usage and access rights in
the hwmon subsystem.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-4-8bfb7f51145a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Javier Carrasco
2de83b67cf ABI: sysfs-class-hwmon: fix tempY_crit_alarm access rights
This attribute is defined as read-only by all drivers that support it.

It seems that the access rights and description for this attribute were
copied from the intrusionY_alarm, which has indeed RW rights and must be
cleared by the user.

These are the modules that currently use this attribute:
- adt7x10
- i5500_temp
- jc42
- lm83
- lm90
- lm95245
- max31760
- max6621
- mc34vr500
- tmp401
- tmp464
- tmp513

Fix the attribute description and make it read-only.

Fixes: 365b5d63a5 ("ABI: sysfs-class-hwmon: add a description for tempY_crit_alarm")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-3-8bfb7f51145a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Javier Carrasco
d0d710554e ABI: sysfs-class-hwmon: document missing humidity attributes
All these attributes already exist and are used by the hwmon subsystem,
but they still must be documented.

The missing attributes are the following:
- humidityY_alarm
- humidityY_fault
- humidityY_label
- humidityY_max
- humidityY_max_hyst
- humidityY_min
- humidityY_min_hyst

Add the missing humidity attributes to the ABI documentation according
to their current usage and access rights in the hwmon subsystem.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-2-8bfb7f51145a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Javier Carrasco
02d0fdd484 ABI: sysfs-class-hwmon: rearrange humidity attributes alphabetically
Preliminary step to add the missing humidity attributes in the ABI
documentation.

Adding new elements alphabetically is a common practice that has been
loosely followed in the sysfs-class-hwmon documentation. Since most of
the humidity attributes must be added to the file, a single attribute
needs to be rearranged to reinforce alphabetical order.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231116-hwmon_abi-v1-1-8bfb7f51145a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Peter Yin
ce0742404a hwmon: (pmbus) Add support for MPS Multi-phase mp5990
Add support for mp5990 device from Monolithic Power Systems, Inc. (MPS)
vendor. This is a Hot-Swap Controller.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20231113155008.2147090-3-peteryin.openbmc@gmail.com
[groeck: Improved and clarified comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Peter Yin
599617301e dt-bindings: hwmon: Add mps mp5990 driver bindings
Add a device tree bindings for mp5990 device.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231113155008.2147090-2-peteryin.openbmc@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Rob Herring
ac0c26bae6 hwmon: (lm25066) Use i2c_get_match_data()
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.

Adjust the 'chips' enum to not use 0, so that no match data can be
distinguished from a valid enum value.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-3-robh@kernel.org
[groeck: Use double cast for enum chips assignment to make compiler happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:21:00 -08:00
Guenter Roeck
2792fc8f8c hwmon: (nct6775-core) Explicitly initialize nct6775_device_names indexes
Changing the "kinds" enum start value to be 1-indexed instead of
0-indexed caused look-ups in nct6775_device_names[] to be misaligned or
off the end.

Initialize the string list with explicit indexes.

Cc: Rob Herring <robh@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Fixes: 10a0575ea0 ("hwmon: nct6775-i2c: Use i2c_get_match_data()")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:54 -08:00
Kees Cook
efe86092ab hwmon: (nct6775-platform) Explicitly initialize nct6775_sio_names indexes
Changing the "kinds" enum start value to be 1-indexed instead of
0-indexed caused look-ups in nct6775_sio_namesp[] to be misaligned or
off the end. Coverity reported:

*** CID 1571052:  Memory - illegal accesses  (OVERRUN)
drivers/hwmon/nct6775-platform.c:1075 in nct6775_find()
1069                sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
1070                sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
1071                sio_data->kind == nct6798 || sio_data->kind == nct6799)
1072                    nct6791_enable_io_mapping(sio_data);
1073
1074            sio_data->sio_exit(sio_data);
vvv     CID 1571052:  Memory - illegal accesses  (OVERRUN)
vvv     Overrunning array "nct6775_sio_names" of 13 8-byte elements at element index 13 (byte offset 111) using index "sio_data->kind" (which evaluates to 13).
1075            pr_info("Found %s or compatible chip at %#x:%#x\n",
1076                    nct6775_sio_names[sio_data->kind], sioaddr, addr);
1077
1078            return addr;
1079     }
1080

Initialize the string list with explicit indexes.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Fixes: 10a0575ea0 ("hwmon: nct6775-i2c: Use i2c_get_match_data()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231116140144.work.027-kees@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Rob Herring
10a0575ea0 hwmon: (nct6775-i2c) Use i2c_get_match_data()
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.

Adjust the 'kinds' enum to not use 0, so that no match data can be
distinguished from a valid enum value.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-2-robh@kernel.org
[groeck: Use double cast for i2c_get_match_data() to make clang happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Rob Herring
5cfc392cc9 hwmon: (max6650) Use i2c_get_match_data()
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Gustavo A. R. Silva
b0d51ada88 hwmon: (aspeed-pwm-tacho) Fix -Wstringop-overflow warning in aspeed_create_fan_tach_channel()
Based on the documentation below, the maximum number of Fan tach
channels is 16:

Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt:45:
 45 - aspeed,fan-tach-ch : should specify the Fan tach input channel.
 46                 integer value in the range 0 through 15, with 0 indicating
 47                 Fan tach channel 0 and 15 indicating Fan tach channel 15.
 48                 At least one Fan tach input channel is required.

However, the compiler doesn't know that, and legitimaly warns about a potential
overwrite in array `u8 fan_tach_ch_source[16]` in `struct aspeed_pwm_tacho_data`,
in case `index` takes a value outside the boundaries of the array:

drivers/hwmon/aspeed-pwm-tacho.c:
179 struct aspeed_pwm_tacho_data {
...
184         bool fan_tach_present[16];
...
193         u8 fan_tach_ch_source[16];
196 };

In function ‘aspeed_create_fan_tach_channel’,
    inlined from ‘aspeed_create_fan’ at drivers/hwmon/aspeed-pwm-tacho.c:877:2,
    inlined from ‘aspeed_pwm_tacho_probe’ at drivers/hwmon/aspeed-pwm-tacho.c:936:9:
drivers/hwmon/aspeed-pwm-tacho.c:751:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
  751 |                 priv->fan_tach_ch_source[index] = pwm_source;
      |                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
drivers/hwmon/aspeed-pwm-tacho.c: In function ‘aspeed_pwm_tacho_probe’:
drivers/hwmon/aspeed-pwm-tacho.c:193:12: note: at offset [48, 255] into destination object ‘fan_tach_ch_source’ of size 16
  193 |         u8 fan_tach_ch_source[16];
      |            ^~~~~~~~~~~~~~~~~~

Fix this by sanity checking `index` before using it to index arrays of
size 16 elements in `struct aspeed_pwm_tacho_data`. Also, pass `dev` as
argument to function `aspeed_create_fan_tach_channel()`, and add an error
message in case `index` is out-of-bounds, in which case return `-EINVAL`.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZVPQJIP26dIzRAr6@work
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Yang Li
10bd80e0b3 hwmon: Fix some kernel-doc comments
Fix some kernel-doc comments to silence the warnings:
drivers/hwmon/sht4x.c:65: warning: Function parameter or member 'valid' not described in 'sht4x_data'
drivers/hwmon/sht4x.c:73: warning: Function parameter or member 'data' not described in 'sht4x_read_values'
drivers/hwmon/sht4x.c:73: warning: Excess function parameter 'sht4x_data' description in 'sht4x_read_values'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7220
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231110055341.39939-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Delphine CC Chiu
9350163aff hwmon: (emc1403) Add support for EMC1442
Add support for EMC1442 which is compatible with EMC1402.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20231102090808.427351-1-Delphine_CC_Chiu@wiwynn.com
[groeck: compatible with EMC1402, not EMC1403]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Antoniu Miclaus
34c76a5120 hwmon: (ltc2991) remove device reference from state
Remove device reference from struct ltc2991_state since it is used only
inside the init function.

Pass the struct device as parameter to the init function instead.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231031095647.48376-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Tomer Maimon
89fec128d5 hwmon: (npcm750-pwm-fan) Add NPCM8xx support
Adding Pulse Width Modulation (PWM) and fan tacho NPCM8xx support to
NPCM PWM and fan tacho driver.
NPCM8xx uses a different number of PWM devices.

As part of adding NPCM8XX support:
- Add NPCM8xx specific compatible string.
- Add data to handle architecture-specific PWM parameters.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20231031075806.400872-2-tmaimon77@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-11 06:20:28 -08:00
Etienne Carriere
b19773a1c6 optee: add missing description of RPC argument reference
Adds missing inline description comment for RPC optional arguments
reference.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202310192021.fvb6JDOY-lkp@intel.com/
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2023-12-11 15:02:12 +01:00
Heiko Carstens
7fe228e186 s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-12-11 14:33:07 +01:00
Claudio Imbrenda
a6d27ea01a s390/mm: convert pgste locking functions to C
Convert pgste_get_lock() and pgste_set_unlock() to C.

There is no real reasons to keep them in assembler. Having them in C
makes them more readable and maintainable, and better instructions are
used automatically when available.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20231205173252.62305-1-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-12-11 14:33:07 +01:00