Commit graph

546,738 commits

Author SHA1 Message Date
Takashi Iwai
67756e3191 ALSA: pcm: Fix lockdep warning with nonatomic PCM ops
With the nonatomic PCM ops, the system may spew lockdep warnings like:

 =============================================
 [ INFO: possible recursive locking detected ]
 4.2.0-rc1-jeejaval3 #12 Not tainted
 ---------------------------------------------
 aplay/4029 is trying to acquire lock:
  (snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fd473>] snd_pcm_stream_lock+0x43/0x60

 but task is already holding lock:
  (snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fcf29>] snd_pcm_action_nonatomic+0x29/0x80

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(snd_pcm_link_rwsem);
   lock(snd_pcm_link_rwsem);

Although this is false-positive as the rwsem is taken always as
read-only for these code paths, it's certainly annoying to see this at
any occasion.  A simple fix is to use down_read_nested() in
snd_pcm_stream_lock() that can be called inside another lock.

Reported-by: Vinod Koul <vinod.koul@intel.com>
Reported-by: Jeeja Kp <jeeja.kp@intel.com>
Tested-by: Jeeja Kp <jeeja.kp@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-17 15:36:54 +02:00
Martin Willi
b1ccc8f4b6 crypto: poly1305 - Add a four block AVX2 variant for x86_64
Extends the x86_64 Poly1305 authenticator by a function processing four
consecutive Poly1305 blocks in parallel using AVX2 instructions.

For large messages, throughput increases by ~15-45% compared to two
block SSE2:

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3809514 opers/sec,  365713411 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5973423 opers/sec,  573448627 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9446779 opers/sec,  906890803 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1364814 opers/sec,  393066691 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2045780 opers/sec,  589184697 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3711946 opers/sec, 1069040592 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  573686 opers/sec,  605812732 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1647802 opers/sec, 1740079440 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  292970 opers/sec,  609378224 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  943229 opers/sec, 1961916528 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  494623 opers/sec, 2041804569 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  254045 opers/sec, 2089271014 bytes/sec

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3826224 opers/sec,  367317552 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5948638 opers/sec,  571069267 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9439110 opers/sec,  906154627 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1367756 opers/sec,  393913872 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2056881 opers/sec,  592381958 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3711153 opers/sec, 1068812179 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  574940 opers/sec,  607136745 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1948830 opers/sec, 2057964585 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  293308 opers/sec,  610082096 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates): 1235224 opers/sec, 2569267792 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  684405 opers/sec, 2825226316 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  367101 opers/sec, 3019039446 bytes/sec

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:29 +08:00
Martin Willi
da35b22df3 crypto: poly1305 - Add a two block SSE2 variant for x86_64
Extends the x86_64 SSE2 Poly1305 authenticator by a function processing two
consecutive Poly1305 blocks in parallel using a derived key r^2. Loop
unrolling can be more effectively mapped to SSE instructions, further
increasing throughput.

For large messages, throughput increases by ~45-65% compared to single
block SSE2:

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3790063 opers/sec,  363846076 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5913378 opers/sec,  567684355 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9352574 opers/sec,  897847104 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1362145 opers/sec,  392297990 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2007075 opers/sec,  578037628 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  566272 opers/sec,  597984182 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  288857 opers/sec,  600823808 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  153075 opers/sec, 1258896201 bytes/sec

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3809514 opers/sec,  365713411 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5973423 opers/sec,  573448627 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9446779 opers/sec,  906890803 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1364814 opers/sec,  393066691 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2045780 opers/sec,  589184697 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3711946 opers/sec, 1069040592 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  573686 opers/sec,  605812732 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1647802 opers/sec, 1740079440 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  292970 opers/sec,  609378224 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  943229 opers/sec, 1961916528 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  494623 opers/sec, 2041804569 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  254045 opers/sec, 2089271014 bytes/sec

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:28 +08:00
Martin Willi
c70f4abef0 crypto: poly1305 - Add a SSE2 SIMD variant for x86_64
Implements an x86_64 assembler driver for the Poly1305 authenticator. This
single block variant holds the 130-bit integer in 5 32-bit words, but uses
SSE to do two multiplications/additions in parallel.

When calling updates with small blocks, the overhead for kernel_fpu_begin/
kernel_fpu_end() negates the perfmance gain. We therefore use the
poly1305-generic fallback for small updates.

For large messages, throughput increases by ~5-10% compared to
poly1305-generic:

testing speed of poly1305 (poly1305-generic)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 4080026 opers/sec,  391682496 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 6221094 opers/sec,  597225024 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9609750 opers/sec,  922536057 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1459379 opers/sec,  420301267 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2115179 opers/sec,  609171609 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3729874 opers/sec, 1074203856 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  593000 opers/sec,  626208000 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1081536 opers/sec, 1142102332 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  302077 opers/sec,  628320576 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  554384 opers/sec, 1153120176 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  278715 opers/sec, 1150536345 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  140202 opers/sec, 1153022070 bytes/sec

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3790063 opers/sec,  363846076 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5913378 opers/sec,  567684355 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9352574 opers/sec,  897847104 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1362145 opers/sec,  392297990 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2007075 opers/sec,  578037628 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  566272 opers/sec,  597984182 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  288857 opers/sec,  600823808 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  153075 opers/sec, 1258896201 bytes/sec

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:27 +08:00
Martin Willi
2546f811ef crypto: poly1305 - Export common Poly1305 helpers
As architecture specific drivers need a software fallback, export Poly1305
init/update/final functions together with some helpers in a header file.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:26 +08:00
Martin Willi
6692cbc28e crypto: testmgr - Add a longer ChaCha20 test vector
The AVX2 variant of ChaCha20 is used only for messages with >= 512 bytes
length. With the existing test vectors, the implementation could not be
tested. Due that lack of such a long official test vector, this one is
self-generated using chacha20-generic.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:26 +08:00
Martin Willi
3d1e93cdf1 crypto: chacha20 - Add an eight block AVX2 variant for x86_64
Extends the x86_64 ChaCha20 implementation by a function processing eight
ChaCha20 blocks in parallel using AVX2.

For large messages, throughput increases by ~55-70% compared to four block
SSSE3:

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 42249230 operations in 10 seconds (675987680 bytes)
test 1 (256 bit key, 64 byte blocks): 46441641 operations in 10 seconds (2972265024 bytes)
test 2 (256 bit key, 256 byte blocks): 33028112 operations in 10 seconds (8455196672 bytes)
test 3 (256 bit key, 1024 byte blocks): 11568759 operations in 10 seconds (11846409216 bytes)
test 4 (256 bit key, 8192 byte blocks): 1448761 operations in 10 seconds (11868250112 bytes)

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 41999675 operations in 10 seconds (671994800 bytes)
test 1 (256 bit key, 64 byte blocks): 45805908 operations in 10 seconds (2931578112 bytes)
test 2 (256 bit key, 256 byte blocks): 32814947 operations in 10 seconds (8400626432 bytes)
test 3 (256 bit key, 1024 byte blocks): 19777167 operations in 10 seconds (20251819008 bytes)
test 4 (256 bit key, 8192 byte blocks): 2279321 operations in 10 seconds (18672197632 bytes)

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:25 +08:00
Martin Willi
274f938e0a crypto: chacha20 - Add a four block SSSE3 variant for x86_64
Extends the x86_64 SSSE3 ChaCha20 implementation by a function processing
four ChaCha20 blocks in parallel. This avoids the word shuffling needed
in the single block variant, further increasing throughput.

For large messages, throughput increases by ~110% compared to single block
SSSE3:

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes)
test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes)
test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes)
test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes)
test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes)

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 42249230 operations in 10 seconds (675987680 bytes)
test 1 (256 bit key, 64 byte blocks): 46441641 operations in 10 seconds (2972265024 bytes)
test 2 (256 bit key, 256 byte blocks): 33028112 operations in 10 seconds (8455196672 bytes)
test 3 (256 bit key, 1024 byte blocks): 11568759 operations in 10 seconds (11846409216 bytes)
test 4 (256 bit key, 8192 byte blocks): 1448761 operations in 10 seconds (11868250112 bytes)

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:25 +08:00
Martin Willi
c9320b6dcb crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64
Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This
single block variant works on a single state matrix using SSE instructions.
It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate
operations.

For large messages, throughput increases by ~65% compared to
chacha20-generic:

testing speed of chacha20 (chacha20-generic) encryption
test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes)
test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes)
test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes)
test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes)
test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes)

testing speed of chacha20 (chacha20-simd) encryption
test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes)
test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes)
test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes)
test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes)
test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes)

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:24 +08:00
Martin Willi
31d7247da5 crypto: chacha20 - Export common ChaCha20 helpers
As architecture specific drivers need a software fallback, export a
ChaCha20 en-/decryption function together with some helpers in a header
file.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:21 +08:00
Martin Willi
2dce063a31 crypto: tcrypt - Add ChaCha20/Poly1305 speed tests
Adds individual ChaCha20 and Poly1305 and a combined rfc7539esp AEAD speed
test using mode numbers 214, 321 and 213. For Poly1305 we add a specific
speed template, as it expects the key prepended to the input data.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:20 +08:00
Herbert Xu
7479092233 crypto: chacha20poly1305 - Convert to new AEAD interface
This patch converts rfc7539 and rfc7539esp to the new AEAD interface.
The test vectors for rfc7539esp have also been updated to include
the IV.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Martin Willi <martin@strongswan.org>
2015-07-17 21:20:19 +08:00
Tadeusz Struk
6e8ec66c3d crypto: rsa - limit supported key lengths
Introduce constrains for RSA keys lengths.
Only key lengths of 512, 1024, 1536, 2048, 3072, and 4096 bits
will be supported.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:19 +08:00
Tadeusz Struk
a990532023 crypto: qat - Add support for RSA algorithm
Add RSA support to QAT driver.
Removed unused RNG rings.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:18 +08:00
Tadeusz Struk
28cfaf67e5 crypto: qat - add MMP FW support to accel engine
Add code that loads the MMP firmware

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:16 +08:00
Pingchao Yang
f3dd7e60d2 crypto: qat - add support for MMP FW
Load Modular Math Processor(MMP) firmware into QAT devices to support
public key algorithm acceleration.

Signed-off-by: Pingchao Yang <pingchao.yang@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:15 +08:00
Herbert Xu
544c436a8e crypto: testmgr - Reenable rfc4309 test
Now that all implementations of rfc4309 have been converted we can
reenable the test.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:14 +08:00
Herbert Xu
cc81565307 crypto: nx - Convert ccm to new AEAD interface
This patch converts the nx ccm and 4309 implementations to the
new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:13 +08:00
Herbert Xu
2642d6abca crypto: aes-ce-ccm - Convert to new AEAD interface
This patch converts the ARM64 aes-ce-ccm implementation to the
new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2015-07-17 21:20:10 +08:00
Herbert Xu
81c4c35eb6 crypto: ccm - Convert to new AEAD interface
This patch converts generic ccm and its associated transforms to
the new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:09 +08:00
Herbert Xu
0bc5a6c5c7 crypto: testmgr - Disable rfc4309 test and convert test vectors
This patch disables the rfc4309 test while the conversion to the
new seqiv calling convention takes place.  It also replaces the
rfc4309 test vectors with ones that will work with the new IV
convention.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:08 +08:00
Laurent Pinchart
adb8963f27 [media] v4l: vsp1: Don't sleep in atomic context
The vsp1_entity_is_streaming() function is called in atomic context when
queuing buffers, and sleeps due to a mutex. As the mutex just protects
access to one structure field, fix this by replace the mutex with a
spinlock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 10:03:43 -03:00
Laurent Pinchart
df5c3e7c8a [media] v4l: vsp1: Fix plane stride and size checks
The checks need to be performed on up to two planes, as the third plane,
if present, must have the same stride and size as the second plane.

The code incorrectly performs the checks on at least two planes instead
of at most two planes, fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 10:02:48 -03:00
Arik Nemtsov
923b352f19 cfg80211: use RTNL locked reg_can_beacon for IR-relaxation
The RTNL is required to check for IR-relaxation conditions that allow
more channels to beacon. Export an RTNL locked version of reg_can_beacon
and use it where possible in AP/STA interface type flows, where
IR-relaxation may be applicable.

Fixes: 06f207fc54 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:02:02 +02:00
Dan Carpenter
e31f8f00bf [media] v4l: xilinx: missing error code
We should set "ret" on this error path instead of returning success.

Fixes: df3305156f ('[media] v4l: xilinx: Add Xilinx Video IP core')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 10:01:47 -03:00
Mats Randgaard
d32d98642d [media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge
The driver is tested on our hardware and all the implemented features
works as expected.

Missing features:
- CEC support
- HDCP repeater support
- IR support

Signed-off-by: Mats Randgaard <matrandg@cisco.com>
[hans.verkuil@cisco.com: updated copyright year to 2015]
[hans.verkuil@cisco.com: update confusing confctl_mutex comment]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:59:28 -03:00
Heloise NH
6986a0e255 ALSA: hda: fix kstrdup return value
In kstrdup we should return -ENOMEM when it reports an
memory allocation failure, while the -ENODEV is referred
to a failure in finding the cpu node in the device tree.

Signed-off-by: Heloise NH <kernelpatch_update@163.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-17 14:56:19 +02:00
Fabien Dessenne
bde2b96d6d [media] bdisp: fix debug info memory access
bdisp_dev->dbg.copy_node shall be a copy of (and not point to)
bdisp_ctx->node, since this resource is freed upon driver release.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:53:37 -03:00
Fabien Dessenne
24310279eb [media] bdisp: add debug info for RGB24 format
Add this missing debug information

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:53:20 -03:00
Fabien Dessenne
3d8bffe883 [media] bdisp: composing support
Support the composing (at VIDEO_CAPTURE) with the _selection API.
v4l2-compliance successfully run ("test Composing: OK")

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:52:59 -03:00
Ezequiel Garcia
d3194520e2 [media] stk1160: Add frame scaling support
This commit implements frame decimation for stk1160, which allows
to support format changes instead of a static frame size.

The stk1160 supports independent row and column decimation, in two
different modes:
 * set a number of rows/columns units to skip for each unit sent.
 * set a number of rows/columns units to send for each unit skipped.

This effectively allows to achieve different frame scaling ratios.

The unit number can be set to either two row/columns sent/skipped,
or four row/columns sent/skipped. Since the video format (UYVY)
has 4-bytes, using a unit number of two row/columns results
in frame color 'shifting', so set to four row/columns sent/skipped.

Signed-off-by: Michael Stegemann <michael@stegemann.it>
Signed-off-by: Dale Hamel <dale.hamel@srvthe.net>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:52:31 -03:00
Ezequiel Garcia
890024ad14 [media] stk1160: Reduce driver verbosity
These messages are not really informational, and just makes the driver's
output too verbose. This commit changes some messages to a debug level,
removes a really useless "driver loaded" message and finally undefines
the DEBUG macro.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:51:15 -03:00
Benoit Parrot
f47c904564 [media] media: am437x-vpfe: Requested frame size and fmt overwritten by current sensor setting
Upon a S_FMT the input/requested frame size and pixel format is
overwritten by the current sub-device settings.
Fix this so application can actually set the frame size and format.

Fixes: 417d2e507e ("[media] media: platform: add VPFE capture driver support for AM437X")

Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:50:36 -03:00
Geert Uytterhoeven
2f8e75d276 [media] adv7604/cobalt: Allow compile test if !GPIOLIB
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency of VIDEO_ADV7604 and VIDEO_COBALT (the latter
selects the former) on GPIOLIB if COMPILE_TEST is enabled.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:49:48 -03:00
Hans Verkuil
ee5da769b3 [media] DocBook media: fix typo in V4L2_CTRL_FLAG_EXECUTE_ON_WRITE
Fix small typo (missing 'it') in the documentation for
V4L2_CTRL_FLAG_EXECUTE_ON_WRITE.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:49:20 -03:00
Hans Verkuil
86e46aa80d [media] DocBook: fix media-ioc-device-info.xml type
The documentation had two media_version entries. The second one was a typo and
it should be driver_version instead. Correct this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:48:55 -03:00
Lars-Peter Clausen
2cf4090fc8 [media] adv7842: Deliver resolution change events to userspace
Use the new v4l2_subdev_notify_event() helper function to deliver the
resolution change event to userspace via the v4l2 subdev event queue as
well as to the bridge driver using the callback notify mechanism.

This allows userspace applications to react to changes in resolution. This
is useful and often necessary for video pipelines where there is no direct
1-to-1 relationship between the subdevice converter and the video capture
device and hence it does not make sense to directly forward the event to
the video capture device node.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
[hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:48:32 -03:00
Lars-Peter Clausen
6f5bcfc30e [media] adv7604: Deliver resolution change events to userspace
Use the new v4l2_subdev_notify_event() helper function to deliver the
resolution change event to userspace via the v4l2 subdev event queue as
well as to the bridge driver using the callback notify mechanism.

This allows userspace applications to react to changes in resolution. This
is useful and often necessary for video pipelines where there is no direct
1-to-1 relationship between the subdevice converter and the video capture
device and hence it does not make sense to directly forward the event to
the video capture device node.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
[hans.verkuil@cisco.com: fix obvious mistake: v4l2_event_subdev_unsubscribe -> v4l2_ctrl_subdev_subscribe_event]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:48:07 -03:00
Lars-Peter Clausen
8ae5640f1b [media] Add helper function for subdev event notifications
Add a new helper function called v4l2_subdev_notify_event() which will
deliver the specified event to both the v4l2 subdev event queue as well as
to the notify callback. The former is typically used by userspace
applications to listen to notification events while the later is used by
bridge drivers. Combining both into the same function avoids boilerplate
code in subdev drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:45:50 -03:00
Linus Walleij
bcae888039 Merge branch 'queue/irq/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into devel 2015-07-17 14:45:31 +02:00
Lars-Peter Clausen
aef5159ffc [media] adv7842: Add support for control event notifications
Allow userspace applications to subscribe to control change events. This
can e.g. be used to monitor the 5V detect control to be notified when a
source is connected or disconnected.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:44:45 -03:00
Lars-Peter Clausen
0975626d08 [media] adv7604: Add support for control event notifications
Allow userspace applications to subscribe to control change events. This
can e.g. be used to monitor the 5V detect control to be notified when a
source is connected or disconnected.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 09:44:18 -03:00
Bob Copeland
b3e7de873d mac80211: add missing length check for confirm frames
Although mesh_rx_plink_frame() already checks that frames have enough
bytes for the action code plus another two bytes for capability/reason
code, it doesn't take into account that confirm frames also have an
additional two-byte aid.  As a result, a corrupt frame could cause a
subsequent subtraction to wrap around to ill effect.  Add another
check for this case.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 14:39:42 +02:00
Bob Copeland
2ea752cd2c mac80211: correct aid location in peering frames
According to 802.11-2012 8.5.16.3.2 AID comes directly after the
capability bytes in mesh peering confirm frames.  The existing
code, however, was adding a 2 byte offset to this location,
resulting in garbage data going out over the air.  Remove the
offset to fix it.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 14:38:10 +02:00
Thomas Petazzoni
042ab5fc7a wireless: regulatory: reduce log level of CRDA related messages
With a basic Linux userspace, the messages "Calling CRDA to update
world regulatory domain" appears 10 times after boot every second or
so, followed by a final "Exceeded CRDA call max attempts. Not calling
CRDA". For those of us not having the corresponding userspace parts,
having those messages repeatedly displayed at boot time is a bit
annoying, so this commit reduces their log level to pr_debug().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 14:37:23 +02:00
Bjorn Andersson
eb5c144cbb pinctrl: qcom: spmi-mpp: Transpose pinmux function
The "function" of the MPP driver was inherited from the GPIO driver, but the
differences between the two hardware blocks makes both the driver and the
device tree binding to be awkward.

Instead of overloading the "normal" function with various modes this patch
transposes the pinmux function to represent the three operating modes of the
MPP (digital, analog and current sink). The properties of pin pairing and DTEST
routing is moved to separate properties.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:31:19 +02:00
Bjorn Andersson
099f3e4add pinctrl: qcom: spmi-mpp: Add support for setting analog output level
When the MPP is configured for analog output the output level is selected by
the AOUT_CTL register, this patch makes it possible to control this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:29:25 +02:00
Joachim Eastwood
bd6eab9007 pinctrl: lpc18xx: add support for usb1 pinconf
The dedicated USB1 pins can be configured with pull-down and
for low power mode (suspend). Add support for this in the
pinctrl driver.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:23:15 +02:00
Jon Hunter
d96310aedd pinctrl: pinconf: Fix display of configs
The function pinconf_dbg_config_print() only prints the configuration of
the 1st pin config in an array of pin configurations. Fix this so that
all pin configurations in the array are displayed.

There are a few places in the code where the pin configs are displayed
and so add a helper function to display the pin configs to simplify the
code.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:20:49 +02:00
Jon Hunter
7562998106 pinctrl: pinconf: Allow groups to be configured via debugfs
The function pinconf_dbg_config_write() currently only supports configuring
a pin configuration mapping via the debugfs. Allow group mappings to also
be configured via the debugfs.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17 14:19:34 +02:00