Commit graph

31,448 commits

Author SHA1 Message Date
Maciej Fijalkowski
0d68e6fe12 selftests/xsk: Query for native XDP support
Currently, xdpxceiver assumes that underlying device supports XDP in
native mode - it is fine by now since tests can run only on a veth pair.
Future commit is going to allow running test suite against physical
devices, so let us query the device if it is capable of running XDP
programs in native mode. This way xdpxceiver will not try to run
TEST_MODE_DRV if device being tested is not supporting it.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-2-maciej.fijalkowski@intel.com
2022-09-02 15:37:37 +02:00
Shmulik Ladkani
8cc61b7a64 selftests/bpf: Amend test_tunnel to exercise BPF_F_TUNINFO_FLAGS
Get the tunnel flags in {ipv6}vxlan_get_tunnel_src and ensure they are
aligned with tunnel params set at {ipv6}vxlan_set_tunnel_dst.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220831144010.174110-2-shmulik.ladkani@gmail.com
2022-09-02 15:21:03 +02:00
Shmulik Ladkani
44c51472be bpf: Support getting tunnel flags
Existing 'bpf_skb_get_tunnel_key' extracts various tunnel parameters
(id, ttl, tos, local and remote) but does not expose ip_tunnel_info's
tun_flags to the BPF program.

It makes sense to expose tun_flags to the BPF program.

Assume for example multiple GRE tunnels maintained on a single GRE
interface in collect_md mode. The program expects origins to initiate
over GRE, however different origins use different GRE characteristics
(e.g. some prefer to use GRE checksum, some do not; some pass a GRE key,
some do not, etc..).

A BPF program getting tun_flags can therefore remember the relevant
flags (e.g. TUNNEL_CSUM, TUNNEL_SEQ...) for each initiating remote. In
the reply path, the program can use 'bpf_skb_set_tunnel_key' in order
to correctly reply to the remote, using similar characteristics, based
on the stored tunnel flags.

Introduce BPF_F_TUNINFO_FLAGS flag for bpf_skb_get_tunnel_key. If
specified, 'bpf_tunnel_key->tunnel_flags' is set with the tun_flags.

Decided to use the existing unused 'tunnel_ext' as the storage for the
'tunnel_flags' in order to avoid changing bpf_tunnel_key's layout.

Also, the following has been considered during the design:

  1. Convert the "interesting" internal TUNNEL_xxx flags back to BPF_F_yyy
     and place into the new 'tunnel_flags' field. This has 2 drawbacks:

     - The BPF_F_yyy flags are from *set_tunnel_key* enumeration space,
       e.g. BPF_F_ZERO_CSUM_TX. It is awkward that it is "returned" into
       tunnel_flags from a *get_tunnel_key* call.
     - Not all "interesting" TUNNEL_xxx flags can be mapped to existing
       BPF_F_yyy flags, and it doesn't make sense to create new BPF_F_yyy
       flags just for purposes of the returned tunnel_flags.

  2. Place key.tun_flags into 'tunnel_flags' but mask them, keeping only
     "interesting" flags. That's ok, but the drawback is that what's
     "interesting" for my usecase might be limiting for other usecases.

Therefore I decided to expose what's in key.tun_flags *as is*, which seems
most flexible. The BPF user can just choose to ignore bits he's not
interested in. The TUNNEL_xxx are also UAPI, so no harm exposing them
back in the get_tunnel_key call.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220831144010.174110-1-shmulik.ladkani@gmail.com
2022-09-02 15:20:55 +02:00
Hou Tao
73b97bc78b selftests/bpf: Test concurrent updates on bpf_task_storage_busy
Under full preemptible kernel, task local storage lookup operations on
the same CPU may update per-cpu bpf_task_storage_busy concurrently. If
the update of bpf_task_storage_busy is not preemption safe, the final
value of bpf_task_storage_busy may become not-zero forever and
bpf_task_storage_trylock() will always fail. So add a test case to
ensure the update of bpf_task_storage_busy is preemption safe.

Will skip the test case when CONFIG_PREEMPT is disabled, and it can only
reproduce the problem probabilistically. By increasing
TASK_STORAGE_MAP_NR_LOOP and running it under ARM64 VM with 4-cpus, it
takes about four rounds to reproduce:

> test_maps is modified to only run test_task_storage_map_stress_lookup()
$ export TASK_STORAGE_MAP_NR_THREAD=256
$ export TASK_STORAGE_MAP_NR_LOOP=81920
$ export TASK_STORAGE_MAP_PIN_CPU=1
$ time ./test_maps
test_task_storage_map_stress_lookup(135):FAIL:bad bpf_task_storage_busy got -2

real    0m24.743s
user    0m6.772s
sys     0m17.966s

Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-5-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-09-01 12:16:21 -07:00
Hou Tao
c710136e87 selftests/bpf: Move sys_pidfd_open() into task_local_storage_helpers.h
sys_pidfd_open() is defined twice in both test_bprm_opts.c and
test_local_storage.c, so move it to a common header file. And it will be
used in map_tests as well.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-4-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-09-01 12:16:20 -07:00
Hou Tao
1c636b6277 selftests/bpf: Add test cases for htab update
One test demonstrates the reentrancy of hash map update on the same
bucket should fail, and another one shows concureently updates of
the same hash map bucket should succeed and not fail due to
the reentrancy checking for bucket lock.

There is no trampoline support on s390x, so move htab_update to
denylist.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-4-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-08-31 14:10:01 -07:00
Martin KaFai Lau
197072945a selftest/bpf: Ensure no module loading in bpf_setsockopt(TCP_CONGESTION)
This patch adds a test to ensure bpf_setsockopt(TCP_CONGESTION, "not_exist")
will not trigger the kernel module autoload.

Before the fix:

  [   40.535829] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
  [...]
  [   40.552134]  tcp_ca_find_autoload.constprop.0+0xcb/0x200
  [   40.552689]  tcp_set_congestion_control+0x99/0x7b0
  [   40.553203]  do_tcp_setsockopt+0x3ed/0x2240
  [...]
  [   40.556041]  __bpf_setsockopt+0x124/0x640

Signed-off-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220830231953.792412-1-martin.lau@linux.dev
2022-08-31 22:22:29 +02:00
James Hilliard
14e5ce7994 libbpf: Add GCC support for bpf_tail_call_static
The bpf_tail_call_static function is currently not defined unless
using clang >= 8.

To support bpf_tail_call_static on GCC we can check if __clang__ is
not defined to enable bpf_tail_call_static.

We need to use GCC assembly syntax when the compiler does not define
__clang__ as LLVM inline assembly is not fully compatible with GCC.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220829210546.755377-1-james.hilliard1@gmail.com
2022-08-31 20:54:23 +02:00
Hao Luo
6f95de6d71 bpftool: Add support for querying cgroup_iter link
Support dumping info of a cgroup_iter link. This includes
showing the cgroup's id and the order for walking the cgroup
hierarchy. Example output is as follows:

> bpftool link show
1: iter  prog 2  target_name bpf_map
2: iter  prog 3  target_name bpf_prog
3: iter  prog 12  target_name cgroup  cgroup_id 72  order self_only

> bpftool -p link show
[{
        "id": 1,
        "type": "iter",
        "prog_id": 2,
        "target_name": "bpf_map"
    },{
        "id": 2,
        "type": "iter",
        "prog_id": 3,
        "target_name": "bpf_prog"
    },{
        "id": 3,
        "type": "iter",
        "prog_id": 12,
        "target_name": "cgroup",
        "cgroup_id": 72,
        "order": "self_only"
    }
]

Signed-off-by: Hao Luo <haoluo@google.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220829231828.1016835-1-haoluo@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@linux.dev>
2022-08-30 11:02:03 -07:00
James Hilliard
2eb680401d selftests/bpf: Fix connect4_prog tcp/socket header type conflict
There is a potential for us to hit a type conflict when including
netinet/tcp.h and sys/socket.h, we can replace both of these includes
with linux/tcp.h and bpf_tcp_helpers.h to avoid this conflict.

Fixes errors like the below when compiling with gcc BPF backend:

  In file included from /usr/include/netinet/tcp.h:91,
                   from progs/connect4_prog.c:11:
  /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char'
     34 | typedef __INT8_TYPE__ int8_t;
        |                       ^~~~~~
  In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
                   from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
                   from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
                   from progs/connect4_prog.c:10:
  /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'}
     24 | typedef __int8_t int8_t;
        |                  ^~~~~~
  /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int'
     43 | typedef __INT64_TYPE__ int64_t;
        |                        ^~~~~~~
  /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'}
     27 | typedef __int64_t int64_t;
        |                   ^~~~~~~

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220829154710.3870139-1-james.hilliard1@gmail.com
2022-08-29 22:19:48 +02:00
James Hilliard
3721359d39 selftests/bpf: Fix bind{4,6} tcp/socket header type conflict
There is a potential for us to hit a type conflict when including
netinet/tcp.h with sys/socket.h, we can remove these as they are not
actually needed.

Fixes errors like the below when compiling with gcc BPF backend:

  In file included from /usr/include/netinet/tcp.h:91,
                   from progs/bind4_prog.c:10:
  /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char'
     34 | typedef __INT8_TYPE__ int8_t;
        |                       ^~~~~~
  In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
                   from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
                   from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
                   from progs/bind4_prog.c:9:
  /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'}
     24 | typedef __int8_t int8_t;
        |                  ^~~~~~
  /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int'
     43 | typedef __INT64_TYPE__ int64_t;
        |                        ^~~~~~~
  /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'}
     27 | typedef __int64_t int64_t;
        |                   ^~~~~~~
  make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/bind4_prog.o] Error 1

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220826052925.980431-1-james.hilliard1@gmail.com
2022-08-29 17:00:41 +02:00
Quentin Monnet
aa75622c3b bpf: Fix a few typos in BPF helpers documentation
Address a few typos in the documentation for the BPF helper functions.
They were reported by Jakub [0], who ran spell checkers on the generated
man page [1].

[0] https://lore.kernel.org/linux-man/d22dcd47-023c-8f52-d369-7b5308e6c842@gmail.com/T/#mb02e7d4b7fb61d98fa914c77b581184e9a9537af
[1] https://lore.kernel.org/linux-man/eb6a1e41-c48e-ac45-5154-ac57a2c76108@gmail.com/T/#m4a8d1b003616928013ffcd1450437309ab652f9f

v3: Do not copy unrelated (and breaking) elements to tools/ header
v2: Turn a ',' into a ';'

Reported-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220825220806.107143-1-quentin@isovalent.com
2022-08-26 22:19:31 -07:00
James Hilliard
b05d64efbb selftests/bpf: Declare subprog_noise as static in tailcall_bpf2bpf4
Due to bpf_map_lookup_elem being declared static we need to also
declare subprog_noise as static.

Fixes the following error:
progs/tailcall_bpf2bpf4.c:26:9: error: 'bpf_map_lookup_elem' is static but used in inline function 'subprog_noise' which is not static [-Werror]
   26 |         bpf_map_lookup_elem(&nop_table, &key);
      |         ^~~~~~~~~~~~~~~~~~~

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20220826035141.737919-1-james.hilliard1@gmail.com
2022-08-26 22:07:01 -07:00
James Hilliard
ab9ac19c4d selftests/bpf: fix type conflict in test_tc_dtime
The sys/socket.h header isn't required to build test_tc_dtime and may
cause a type conflict.

Fixes the following error:
In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155,
                 from /usr/include/x86_64-linux-gnu/bits/socket.h:29,
                 from /usr/include/x86_64-linux-gnu/sys/socket.h:33,
                 from progs/test_tc_dtime.c:18:
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: error: conflicting types for 'int8_t'; have '__int8_t' {aka 'signed char'}
   24 | typedef __int8_t int8_t;
      |                  ^~~~~~
In file included from progs/test_tc_dtime.c:5:
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'char'}
   34 | typedef __INT8_TYPE__ int8_t;
      |                       ^~~~~~
/usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: error: conflicting types for 'int64_t'; have '__int64_t' {aka 'long long int'}
   27 | typedef __int64_t int64_t;
      |                   ^~~~~~~
/home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long int'}
   43 | typedef __INT64_TYPE__ int64_t;
      |                        ^~~~~~~
make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/test_tc_dtime.o] Error 1

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20220826050703.869571-1-james.hilliard1@gmail.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
2022-08-26 14:55:38 -07:00
Benjamin Tissoires
343949e107 libbpf: add map_get_fd_by_id and map_delete_elem in light skeleton
This allows to have a better control over maps from the kernel when
preloading eBPF programs.

Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220824134055.1328882-8-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25 18:52:29 -07:00
Hao Luo
d4ffb6f39f bpf: Add CGROUP prefix to cgroup_iter_order
bpf_cgroup_iter_order is globally visible but the entries do not have
CGROUP prefix. As requested by Andrii, put a CGROUP in the names
in bpf_cgroup_iter_order.

This patch fixes two previous commits: one introduced the API and
the other uses the API in bpf selftest (that is, the selftest
cgroup_hierarchical_stats).

I tested this patch via the following command:

  test_progs -t cgroup,iter,btf_dump

Fixes: d4ccaf58a8 ("bpf: Introduce cgroup iter")
Fixes: 88886309d2 ("selftests/bpf: add a selftest for cgroup hierarchical stats collection")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220825223936.1865810-1-haoluo@google.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
2022-08-25 16:26:37 -07:00
Lam Thai
7184aef9c0 bpftool: Fix a wrong type cast in btf_dumper_int
When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.

Fixes: b12d6ec097 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <lamthai@arista.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
2022-08-25 11:43:08 -07:00
Yosry Ahmed
88886309d2 selftests/bpf: add a selftest for cgroup hierarchical stats collection
Add a selftest that tests the whole workflow for collecting,
aggregating (flushing), and displaying cgroup hierarchical stats.

TL;DR:
- Userspace program creates a cgroup hierarchy and induces memcg reclaim
  in parts of it.
- Whenever reclaim happens, vmscan_start and vmscan_end update
  per-cgroup percpu readings, and tell rstat which (cgroup, cpu) pairs
  have updates.
- When userspace tries to read the stats, vmscan_dump calls rstat to flush
  the stats, and outputs the stats in text format to userspace (similar
  to cgroupfs stats).
- rstat calls vmscan_flush once for every (cgroup, cpu) pair that has
  updates, vmscan_flush aggregates cpu readings and propagates updates
  to parents.
- Userspace program makes sure the stats are aggregated and read
  correctly.

Detailed explanation:
- The test loads tracing bpf programs, vmscan_start and vmscan_end, to
  measure the latency of cgroup reclaim. Per-cgroup readings are stored in
  percpu maps for efficiency. When a cgroup reading is updated on a cpu,
  cgroup_rstat_updated(cgroup, cpu) is called to add the cgroup to the
  rstat updated tree on that cpu.

- A cgroup_iter program, vmscan_dump, is loaded and pinned to a file, for
  each cgroup. Reading this file invokes the program, which calls
  cgroup_rstat_flush(cgroup) to ask rstat to propagate the updates for all
  cpus and cgroups that have updates in this cgroup's subtree. Afterwards,
  the stats are exposed to the user. vmscan_dump returns 1 to terminate
  iteration early, so that we only expose stats for one cgroup per read.

- An ftrace program, vmscan_flush, is also loaded and attached to
  bpf_rstat_flush. When rstat flushing is ongoing, vmscan_flush is invoked
  once for each (cgroup, cpu) pair that has updates. cgroups are popped
  from the rstat tree in a bottom-up fashion, so calls will always be
  made for cgroups that have updates before their parents. The program
  aggregates percpu readings to a total per-cgroup reading, and also
  propagates them to the parent cgroup. After rstat flushing is over, all
  cgroups will have correct updated hierarchical readings (including all
  cpus and all their descendants).

- Finally, the test creates a cgroup hierarchy and induces memcg reclaim
  in parts of it, and makes sure that the stats collection, aggregation,
  and reading workflow works as expected.

Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-6-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25 11:35:37 -07:00
Yosry Ahmed
434992bb60 selftests/bpf: extend cgroup helpers
This patch extends bpf selft cgroup_helpers [ID] n various ways:
- Add enable_controllers() that allows tests to enable all or a
  subset of controllers for a specific cgroup.
- Add join_cgroup_parent(). The cgroup workdir is based on the pid,
  therefore a spawned child cannot join the same cgroup hierarchy of the
  test through join_cgroup(). join_cgroup_parent() is used in child
  processes to join a cgroup under the parent's workdir.
- Add write_cgroup_file() and write_cgroup_file_parent() (similar to
  join_cgroup_parent() above).
- Add get_root_cgroup() for tests that need to do checks on root cgroup.
- Distinguish relative and absolute cgroup paths in function arguments.
  Now relative paths are called relative_path, and absolute paths are
  called cgroup_path.

Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-5-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25 11:35:37 -07:00
Hao Luo
fe0dd9d4b7 selftests/bpf: Test cgroup_iter.
Add a selftest for cgroup_iter. The selftest creates a mini cgroup tree
of the following structure:

    ROOT (working cgroup)
     |
   PARENT
  /      \
CHILD1  CHILD2

and tests the following scenarios:

 - invalid cgroup fd.
 - pre-order walk over descendants from PARENT.
 - post-order walk over descendants from PARENT.
 - walk of ancestors from PARENT.
 - process only a single object (i.e. PARENT).
 - early termination.

Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-3-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25 11:35:37 -07:00
Hao Luo
d4ccaf58a8 bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:

 - walking a cgroup's descendants in pre-order.
 - walking a cgroup's descendants in post-order.
 - walking a cgroup's ancestors.
 - process only the given cgroup.

When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.

For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.

One can also terminate the walk early by returning 1 from the iter
program.

Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.

Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.

Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25 11:35:37 -07:00
Yang Yingliang
7e165d1939 selftests/bpf: Fix wrong size passed to bpf_setsockopt()
sizeof(new_cc) is not real memory size that new_cc points to; introduce
a new_cc_len to store the size and then pass it to bpf_setsockopt().

Fixes: 31123c0360 ("selftests/bpf: bpf_setsockopt tests")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220824013907.380448-1-yangyingliang@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 18:59:04 -07:00
Daniel Müller
b03914f7ff selftests/bpf: Add cb_refs test to s390x deny list
The cb_refs BPF selftest is failing execution on s390x machines. This is
a newly added test that requires a feature not presently supported on
this architecture.

Denylist the test for this architecture.

Fixes: 3cf7e7d8685c ("selftests/bpf: Add tests for reference state fixes for callbacks")
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220824163906.1186832-1-deso@posteo.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 18:59:04 -07:00
Kumar Kartikeya Dwivedi
35f14dbd2f selftests/bpf: Add tests for reference state fixes for callbacks
These are regression tests to ensure we don't end up in invalid runtime
state for helpers that execute callbacks multiple times. It exercises
the fixes to verifier callback handling for reference state in previous
patches.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823013226.24988-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 17:54:40 -07:00
Stanislav Fomichev
e7215f5740 selftests/bpf: Make sure bpf_{g,s}et_retval is exposed everywhere
For each hook, have a simple bpf_set_retval(bpf_get_retval) program
and make sure it loads for the hooks we want. The exceptions are
the hooks which don't propagate the error to the callers:

- sockops
- recvmsg
- getpeername
- getsockname
- cg_skb ingress and egress

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-6-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-23 16:08:22 -07:00
Stanislav Fomichev
2172fb8007 bpf: update bpf_{g,s}et_retval documentation
* replace 'syscall' with 'upper layers', still mention that it's being
  exported via syscall errno
* describe what happens in set_retval(-EPERM) + return 1
* describe what happens with bind's 'return 3'

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-5-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-23 16:08:22 -07:00
Shmulik Ladkani
d6513727c2 bpf, selftests: Test BPF_FLOW_DISSECTOR_CONTINUE
The dissector program returns BPF_FLOW_DISSECTOR_CONTINUE (and avoids
setting skb->flow_keys or last_dissection map) in case it encounters
IP packets whose (outer) source address is 127.0.0.127.

Additional test is added to prog_tests/flow_dissector.c which sets
this address as test's pkk.iph.saddr, with the expected retval of
BPF_FLOW_DISSECTOR_CONTINUE.

Also, legacy test_flow_dissector.sh was similarly augmented.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220821113519.116765-5-shmulik.ladkani@gmail.com
2022-08-23 22:48:12 +02:00
Shmulik Ladkani
5deedfbee8 bpf, test_run: Propagate bpf_flow_dissect's retval to user's bpf_attr.test.retval
Formerly, a boolean denoting whether bpf_flow_dissect returned BPF_OK
was set into 'bpf_attr.test.retval'.

Augment this, so users can check the actual return code of the dissector
program under test.

Existing prog_tests/flow_dissector*.c tests were correspondingly changed
to check against each test's expected retval.

Also, tests' resulting 'flow_keys' are verified only in case the expected
retval is BPF_OK. This allows adding new tests that expect non BPF_OK.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220821113519.116765-4-shmulik.ladkani@gmail.com
2022-08-23 22:48:03 +02:00
Shmulik Ladkani
91350fe152 bpf, flow_dissector: Introduce BPF_FLOW_DISSECTOR_CONTINUE retcode for bpf progs
Currently, attaching BPF_PROG_TYPE_FLOW_DISSECTOR programs completely
replaces the flow-dissector logic with custom dissection logic. This
forces implementors to write programs that handle dissection for any
flows expected in the namespace.

It makes sense for flow-dissector BPF programs to just augment the
dissector with custom logic (e.g. dissecting certain flows or custom
protocols), while enjoying the broad capabilities of the standard
dissector for any other traffic.

Introduce BPF_FLOW_DISSECTOR_CONTINUE retcode. Flow-dissector BPF
programs may return this to indicate no dissection was made, and
fallback to the standard dissector is requested.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220821113519.116765-3-shmulik.ladkani@gmail.com
2022-08-23 22:47:55 +02:00
Martin KaFai Lau
b979f005d9 selftest/bpf: Add setget_sockopt to DENYLIST.s390x
Trampoline is not supported in s390.

Fixes: 31123c0360 ("selftests/bpf: bpf_setsockopt tests")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220819192155.91713-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-19 12:46:18 -07:00
Colin Ian King
e918cd231e selftests/bpf: Fix spelling mistake.
There is a spelling mistake in an ASSERT_OK literal string. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Mykola Lysenko <mykolal@fb.com>
Link: https://lore.kernel.org/r/20220817213242.101277-1-colin.i.king@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-19 12:45:14 -07:00
Martin KaFai Lau
31123c0360 selftests/bpf: bpf_setsockopt tests
This patch adds tests to exercise optnames that are allowed
in bpf_setsockopt().

Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061847.4182339-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-18 17:06:14 -07:00
Jakub Kicinski
3f5f728a72 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:

====================
bpf-next 2022-08-17

We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).

The main changes are:

1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
   Kanzenbach and Jesper Dangaard Brouer.

2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.

3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.

4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.

5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
   unsupported names on old kernels, from Hangbin Liu.

6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
   from Hao Luo.

7) Relax libbpf's requirement for shared libs to be marked executable, from
   Henqgi Chen.

8) Improve bpf_iter internals handling of error returns, from Hao Luo.

9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.

10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.

11) bpftool improvements to handle full BPF program names better, from Manu
    Bretelle.

12) bpftool fixes around libcap use, from Quentin Monnet.

13) BPF map internals clean ups and improvements around memory allocations,
    from Yafang Shao.

14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
    iterator to work on cgroupv1, from Yosry Ahmed.

15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.

16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
    Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
  selftests/bpf: Few fixes for selftests/bpf built in release mode
  libbpf: Clean up deprecated and legacy aliases
  libbpf: Streamline bpf_attr and perf_event_attr initialization
  libbpf: Fix potential NULL dereference when parsing ELF
  selftests/bpf: Tests libbpf autoattach APIs
  libbpf: Allows disabling auto attach
  selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
  libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
  selftests/bpf: Update CI kconfig
  selftests/bpf: Add connmark read test
  selftests/bpf: Add existing connection bpf_*_ct_lookup() test
  bpftool: Clear errno after libcap's checks
  bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
  bpftool: Fix a typo in a comment
  libbpf: Add names for auxiliary maps
  bpf: Use bpf_map_area_alloc consistently on bpf map creation
  bpf: Make __GFP_NOWARN consistent in bpf map creation
  bpf: Use bpf_map_area_free instread of kvfree
  bpf: Remove unneeded memset in queue_stack_map creation
  libbpf: preserve errno across pr_warn/pr_info/pr_debug
  ...
====================

Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 20:29:36 -07:00
Andrii Nakryiko
df78da2726 selftests/bpf: Few fixes for selftests/bpf built in release mode
Fix few issues found when building and running test_progs in
release mode.

First, potentially uninitialized idx variable in xskxceiver,
force-initialize to zero to satisfy compiler.

Few instances of defining uprobe trigger functions break in release mode
unless marked as noinline, due to being static. Add noinline to make
sure everything works.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-5-andrii@kernel.org
2022-08-17 22:43:58 +02:00
Andrii Nakryiko
abf84b64e3 libbpf: Clean up deprecated and legacy aliases
Remove three missed deprecated APIs that were aliased to new APIs:
bpf_object__unload, bpf_prog_attach_xattr and btf__load.

Also move legacy API libbpf_find_kernel_btf (aliased to
btf__load_vmlinux_btf) into libbpf_legacy.h.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org
2022-08-17 22:42:56 +02:00
Andrii Nakryiko
813847a314 libbpf: Streamline bpf_attr and perf_event_attr initialization
Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.

Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org
2022-08-17 22:42:10 +02:00
Andrii Nakryiko
d4e6d684f3 libbpf: Fix potential NULL dereference when parsing ELF
Fix if condition filtering empty ELF sections to prevent NULL
dereference.

Fixes: 47ea7417b0 ("libbpf: Skip empty sections in bpf_object__init_global_data_maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-2-andrii@kernel.org
2022-08-17 22:42:10 +02:00
Hao Luo
738a2f2f91 selftests/bpf: Tests libbpf autoattach APIs
Adds test for libbpf APIs that toggle bpf program auto-attaching.

Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816234012.910255-2-haoluo@google.com
2022-08-17 09:42:07 -07:00
Hao Luo
43cb8cbadf libbpf: Allows disabling auto attach
Adds libbpf APIs for disabling auto-attach for individual functions.
This is motivated by the use case of cgroup iter [1]. Some iter
types require their parameters to be non-zero, therefore applying
auto-attach on them will fail. With these two new APIs, users who
want to use auto-attach and these types of iters can disable
auto-attach on the program and perform manual attach.

[1] https://lore.kernel.org/bpf/CAEf4BzZ+a2uDo_t6kGBziqdz--m2gh2_EUwkGLDtMd65uwxUjA@mail.gmail.com/

Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816234012.910255-1-haoluo@google.com
2022-08-17 09:40:47 -07:00
Artem Savkov
807662cac6 selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
Use SYS_PREFIX macro from bpf_misc.h instead of hard-coded '__x64_'
prefix for sys_setdomainname attach point in lsm test.

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816055231.717006-1-asavkov@redhat.com
2022-08-16 13:30:38 -07:00
Hangbin Liu
1f235777c3 libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
Similar with commit 10b62d6a38 ("libbpf: Add names for auxiliary maps"),
let's make bpf_prog_load() also ignore name if kernel doesn't support
program name.

To achieve this, we need to call sys_bpf_prog_load() directly in
probe_kern_prog_name() to avoid circular dependency. sys_bpf_prog_load()
also need to be exported in the libbpf_internal.h file.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220813000936.6464-1-liuhangbin@gmail.com
2022-08-15 14:58:20 -07:00
Daniel Xu
8308bf207c selftests/bpf: Update CI kconfig
The previous selftest changes require two kconfig changes in bpf-ci.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/2c27c6ebf7a03954915f83560653752450389564.1660254747.git.dxu@dxuuu.xyz
2022-08-15 20:53:25 +02:00
Daniel Xu
99799de2cb selftests/bpf: Add connmark read test
Test that the prog can read from the connection mark. This test is nice
because it ensures progs can interact with netfilter subsystem
correctly.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/d3bc620a491e4c626c20d80631063922cbe13e2b.1660254747.git.dxu@dxuuu.xyz
2022-08-15 20:53:25 +02:00
Daniel Xu
e81fbd4c1b selftests/bpf: Add existing connection bpf_*_ct_lookup() test
Add a test where we do a conntrack lookup on an existing connection.
This is nice because it's a more realistic test than artifically
creating a ct entry and looking it up afterwards.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/de5a617832f38f8b5631cc87e2a836da7c94d497.1660254747.git.dxu@dxuuu.xyz
2022-08-15 20:53:24 +02:00
Quentin Monnet
cea558855c bpftool: Clear errno after libcap's checks
When bpftool is linked against libcap, the library runs a "constructor"
function to compute the number of capabilities of the running kernel
[0], at the beginning of the execution of the program. As part of this,
it performs multiple calls to prctl(). Some of these may fail, and set
errno to a non-zero value:

    # strace -e prctl ./bpftool version
    prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1
    prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument)
    prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1
    prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument)
    prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument)
    prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument)
    ** fprintf added at the top of main(): we have errno == 1
    ./bpftool v7.0.0
    using libbpf v1.0
    features: libbfd, libbpf_strict, skeletons
    +++ exited with 0 +++

This has been addressed in libcap 2.63 [1], but until this version is
available everywhere, we can fix it on bpftool side.

Let's clean errno at the beginning of the main() function, to make sure
that these checks do not interfere with the batch mode, where we error
out if errno is set after a bpftool command.

  [0] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/tree/libcap/cap_alloc.c?h=libcap-2.65#n20
  [1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=f25a1b7e69f7b33e6afb58b3e38f3450b7d2d9a0

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220815162205.45043-1-quentin@isovalent.com
2022-08-15 20:37:33 +02:00
Quentin Monnet
4961d07725 bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
Adding or removing room space _below_ layers 2 or 3, as the description
mentions, is ambiguous. This was written with a mental image of the
packet with layer 2 at the top, layer 3 under it, and so on. But it has
led users to believe that it was on lower layers (before the beginning
of the L2 and L3 headers respectively).

Let's make it more explicit, and specify between which layers the room
space is adjusted.

Reported-by: Rumen Telbizov <rumen.telbizov@menlosecurity.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220812153727.224500-3-quentin@isovalent.com
2022-08-15 17:34:29 +02:00
Quentin Monnet
54c939773b bpftool: Fix a typo in a comment
This is the wrong library name: libcap, not libpcap.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220812153727.224500-1-quentin@isovalent.com
2022-08-15 17:29:42 +02:00
Hangbin Liu
10b62d6a38 libbpf: Add names for auxiliary maps
The bpftool self-created maps can appear in final map show output due to
deferred removal in kernel. These maps don't have a name, which would make
users confused about where it comes from.

With a libbpf_ prefix name, users could know who created these maps.
It also could make some tests (like test_offload.py, which skip base maps
without names as a workaround) filter them out.

Kernel adds bpf prog/map name support in the same merge
commit fadad670a8 ("Merge branch 'bpf-extend-info'"). So we can also use
kernel_supports(NULL, FEAT_PROG_NAME) to check if kernel supports map name.

As discussed [1], Let's make bpf_map_create accept non-null
name string, and silently ignore the name if kernel doesn't support.

  [1] https://lore.kernel.org/bpf/CAEf4BzYL1TQwo1231s83pjTdFPk9XWWhfZC5=KzkU-VO0k=0Ug@mail.gmail.com/

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220811034020.529685-1-liuhangbin@gmail.com
2022-08-11 15:12:38 -07:00
Linus Torvalds
7ebfc85e2c Including fixes from bluetooth, bpf, can and netfilter.
A little longer PR than usual but it's all fixes, no late features.
 It's long partially because of timing, and partially because of
 follow ups to stuff that got merged a week or so before the merge
 window and wasn't as widely tested. Maybe the Bluetooth fixes are
 a little alarming so we'll address that, but the rest seems okay
 and not scary.
 
 Notably we're including a fix for the netfilter Kconfig [1], your
 WiFi warning [2] and a bluetooth fix which should unblock syzbot [3].
 
 Current release - regressions:
 
  - Bluetooth:
    - don't try to cancel uninitialized works [3]
    - L2CAP: fix use-after-free caused by l2cap_chan_put
 
  - tls: rx: fix device offload after recent rework
 
  - devlink: fix UAF on failed reload and leftover locks in mlxsw
 
 Current release - new code bugs:
 
  - netfilter:
    - flowtable: fix incorrect Kconfig dependencies [1]
    - nf_tables: fix crash when nf_trace is enabled
 
  - bpf:
    - use proper target btf when exporting attach_btf_obj_id
    - arm64: fixes for bpf trampoline support
 
  - Bluetooth:
    - ISO: unlock on error path in iso_sock_setsockopt()
    - ISO: fix info leak in iso_sock_getsockopt()
    - ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
    - ISO: fix memory corruption on iso_pinfo.base
    - ISO: fix not using the correct QoS
    - hci_conn: fix updating ISO QoS PHY
 
  - phy: dp83867: fix get nvmem cell fail
 
 Previous releases - regressions:
 
  - wifi: cfg80211: fix validating BSS pointers in
    __cfg80211_connect_result [2]
 
  - atm: bring back zatm uAPI after ATM had been removed
 
  - properly fix old bug making bonding ARP monitor mode not being
    able to work with software devices with lockless Tx
 
  - tap: fix null-deref on skb->dev in dev_parse_header_protocol
 
  - revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps
    some devices and breaks others
 
  - netfilter:
    - nf_tables: many fixes rejecting cross-object linking
      which may lead to UAFs
    - nf_tables: fix null deref due to zeroed list head
    - nf_tables: validate variable length element extension
 
  - bgmac: fix a BUG triggered by wrong bytes_compl
 
  - bcmgenet: indicate MAC is in charge of PHY PM
 
 Previous releases - always broken:
 
  - bpf:
    - fix bad pointer deref in bpf_sys_bpf() injected via test infra
    - disallow non-builtin bpf programs calling the prog_run command
    - don't reinit map value in prealloc_lru_pop
    - fix UAFs during the read of map iterator fd
    - fix invalidity check for values in sk local storage map
    - reject sleepable program for non-resched map iterator
 
  - mptcp:
    - move subflow cleanup in mptcp_destroy_common()
    - do not queue data on closed subflows
 
  - virtio_net: fix memory leak inside XDP_TX with mergeable
 
  - vsock: fix memory leak when multiple threads try to connect()
 
  - rework sk_user_data sharing to prevent psock leaks
 
  - geneve: fix TOS inheriting for ipv4
 
  - tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
 
  - phy: c45 baset1: do not skip aneg configuration if clock role
    is not specified
 
  - rose: avoid overflow when /proc displays timer information
 
  - x25: fix call timeouts in blocking connects
 
  - can: mcp251x: fix race condition on receive interrupt
 
  - can: j1939:
    - replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
    - fix memory leak of skbs in j1939_session_destroy()
 
 Misc:
 
  - docs: bpf: clarify that many things are not uAPI
 
  - seg6: initialize induction variable to first valid array index
    (to silence clang vs objtool warning)
 
  - can: ems_usb: fix clang 14's -Wunaligned-access warning
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmL1TtkACgkQMUZtbf5S
 Iruz8Q/+O5xFFsjxuyZD0Mw9d3Jeo3ZI9PeeDvcYl5dZXVegpxqorujTFntxv1Ad
 JC8o5qqms3kO51d+W/yai6iDacEHX2YcJrupZve+vGvpOEVmBRY5O0E1AckJ18+u
 ItmjSVESkybUP5P08/An7Y0dMmj9Xb2z84dGkLe+n8lg6/fimo6Ki6yZjcOBOALu
 AYquMXUcnwztRMbTFjscbJjBd4xFMKZEtthljYtPdIReIN976wmMNYYx+jcPK7ha
 g39Kv6maklp4euerkGIJ/AMnOWHaOGCFjIaz7rr4444NDfrKdt/jeirUXJaz77Jo
 TJM2UOwgOeg6WZkSa3cmdq6UdjdkJ6LTe2CJFf1wJ1qfhAi+s8yWoszsM2Enp+66
 c/mo9jTCMAjmgEJF11idZuz2S697/5j0hvbfM3ZPgNyNBgn8qxz/Z56fNOisx95u
 TkoKKFnGH+mcm/et+omBcyLBtBVK2+/6B6mpl6btf4DOkPn5KFYWHV67uV3ksHzQ
 ye+pnzidoIG0yKbRM2EQKXk7ELKROpl52xUHko93ZinMJt0Q7jBm7tZhJozNFEzi
 hWgUvpmNXgawzLYQcJ9jJmKw3PmYZnRhvYZB/1r91YamM28Hd58k9WfpWtUtjYJN
 N0X58L6JSnKPqzR70pcFppz6iBlh0tHdcEQGWhhKU5ScS3FDxGc=
 =C5Ck
 -----END PGP SIGNATURE-----

Merge tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, bpf, can and netfilter.

  A little larger than usual but it's all fixes, no late features. It's
  large partially because of timing, and partially because of follow ups
  to stuff that got merged a week or so before the merge window and
  wasn't as widely tested. Maybe the Bluetooth fixes are a little
  alarming so we'll address that, but the rest seems okay and not scary.

  Notably we're including a fix for the netfilter Kconfig [1], your WiFi
  warning [2] and a bluetooth fix which should unblock syzbot [3].

  Current release - regressions:

   - Bluetooth:
      - don't try to cancel uninitialized works [3]
      - L2CAP: fix use-after-free caused by l2cap_chan_put

   - tls: rx: fix device offload after recent rework

   - devlink: fix UAF on failed reload and leftover locks in mlxsw

  Current release - new code bugs:

   - netfilter:
      - flowtable: fix incorrect Kconfig dependencies [1]
      - nf_tables: fix crash when nf_trace is enabled

   - bpf:
      - use proper target btf when exporting attach_btf_obj_id
      - arm64: fixes for bpf trampoline support

   - Bluetooth:
      - ISO: unlock on error path in iso_sock_setsockopt()
      - ISO: fix info leak in iso_sock_getsockopt()
      - ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
      - ISO: fix memory corruption on iso_pinfo.base
      - ISO: fix not using the correct QoS
      - hci_conn: fix updating ISO QoS PHY

   - phy: dp83867: fix get nvmem cell fail

  Previous releases - regressions:

   - wifi: cfg80211: fix validating BSS pointers in
     __cfg80211_connect_result [2]

   - atm: bring back zatm uAPI after ATM had been removed

   - properly fix old bug making bonding ARP monitor mode not being able
     to work with software devices with lockless Tx

   - tap: fix null-deref on skb->dev in dev_parse_header_protocol

   - revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
     devices and breaks others

   - netfilter:
      - nf_tables: many fixes rejecting cross-object linking which may
        lead to UAFs
      - nf_tables: fix null deref due to zeroed list head
      - nf_tables: validate variable length element extension

   - bgmac: fix a BUG triggered by wrong bytes_compl

   - bcmgenet: indicate MAC is in charge of PHY PM

  Previous releases - always broken:

   - bpf:
      - fix bad pointer deref in bpf_sys_bpf() injected via test infra
      - disallow non-builtin bpf programs calling the prog_run command
      - don't reinit map value in prealloc_lru_pop
      - fix UAFs during the read of map iterator fd
      - fix invalidity check for values in sk local storage map
      - reject sleepable program for non-resched map iterator

   - mptcp:
      - move subflow cleanup in mptcp_destroy_common()
      - do not queue data on closed subflows

   - virtio_net: fix memory leak inside XDP_TX with mergeable

   - vsock: fix memory leak when multiple threads try to connect()

   - rework sk_user_data sharing to prevent psock leaks

   - geneve: fix TOS inheriting for ipv4

   - tunnels & drivers: do not use RT_TOS for IPv6 flowlabel

   - phy: c45 baset1: do not skip aneg configuration if clock role is
     not specified

   - rose: avoid overflow when /proc displays timer information

   - x25: fix call timeouts in blocking connects

   - can: mcp251x: fix race condition on receive interrupt

   - can: j1939:
      - replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
      - fix memory leak of skbs in j1939_session_destroy()

  Misc:

   - docs: bpf: clarify that many things are not uAPI

   - seg6: initialize induction variable to first valid array index (to
     silence clang vs objtool warning)

   - can: ems_usb: fix clang 14's -Wunaligned-access warning"

* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
  net: atm: bring back zatm uAPI
  dpaa2-eth: trace the allocated address instead of page struct
  net: add missing kdoc for struct genl_multicast_group::flags
  nfp: fix use-after-free in area_cache_get()
  MAINTAINERS: use my korg address for mt7601u
  mlxsw: minimal: Fix deadlock in ports creation
  bonding: fix reference count leak in balance-alb mode
  net: usb: qmi_wwan: Add support for Cinterion MV32
  bpf: Shut up kern_sys_bpf warning.
  net/tls: Use RCU API to access tls_ctx->netdev
  tls: rx: device: don't try to copy too much on detach
  tls: rx: device: bound the frag walk
  net_sched: cls_route: remove from list when handle is 0
  selftests: forwarding: Fix failing tests with old libnet
  net: refactor bpf_sk_reuseport_detach()
  net: fix refcount bug in sk_psock_get (2)
  selftests/bpf: Ensure sleepable program is rejected by hash map iter
  selftests/bpf: Add write tests for sk local storage map iterator
  selftests/bpf: Add tests for reading a dangling map iter fd
  bpf: Only allow sleepable program for resched-able iterator
  ...
2022-08-11 13:45:37 -07:00
Linus Torvalds
e18a90427c * Xen timer fixes
* Documentation formatting fixes
 
 * Make rseq selftest compatible with glibc-2.35
 
 * Fix handling of illegal LEA reg, reg
 
 * Cleanup creation of debugfs entries
 
 * Fix steal time cache handling bug
 
 * Fixes for MMIO caching
 
 * Optimize computation of number of LBRs
 
 * Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmL0qwIUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroML1gf/SK6by+Gi0r7WSkrDjU94PKZ8D6Y3
 fErMhratccc9IfL3p90IjCVhEngfdQf5UVHExA5TswgHHAJTpECzuHya9TweQZc5
 2rrTvufup0MNALfzkSijrcI80CBvrJc6JyOCkv0BLp7yqXUrnrm0OOMV2XniS7y0
 YNn2ZCy44tLqkNiQrLhJQg3EsXu9l7okGpHSVO6iZwC7KKHvYkbscVFa/AOlaAwK
 WOZBB+1Ee+/pWhxsngM1GwwM3ZNU/jXOSVjew5plnrD4U7NYXIDATszbZAuNyxqV
 5gi+wvTF1x9dC6Tgd3qF7ouAqtT51BdRYaI9aYHOYgvzqdNFHWJu3XauDQ==
 =vI6Q
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:

 - Xen timer fixes

 - Documentation formatting fixes

 - Make rseq selftest compatible with glibc-2.35

 - Fix handling of illegal LEA reg, reg

 - Cleanup creation of debugfs entries

 - Fix steal time cache handling bug

 - Fixes for MMIO caching

 - Optimize computation of number of LBRs

 - Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
  KVM: x86/MMU: properly format KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability table
  Documentation: KVM: extend KVM_CAP_VM_DISABLE_NX_HUGE_PAGES heading underline
  KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
  KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
  KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
  KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
  KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
  KVM: selftests: Make rseq compatible with glibc-2.35
  KVM: Actually create debugfs in kvm_create_vm()
  KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
  KVM: Get an fd before creating the VM
  KVM: Shove vcpu stats_id init into kvm_vcpu_init()
  KVM: Shove vm stats_id init into kvm_create_vm()
  KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
  KVM: x86/mmu: rename trace function name for asynchronous page fault
  KVM: x86/xen: Stop Xen timer before changing IRQ
  KVM: x86/xen: Initialize Xen timer only once
  KVM: SVM: Disable SEV-ES support if MMIO caching is disable
  KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
  KVM: x86: Tag kvm_mmu_x86_module_init() with __init
  ...
2022-08-11 12:10:08 -07:00