Pull tcm_vhost level target fabric driver from Nicholas Bellinger:
"Here is the PULL request for the initial merge of tcm_vhost based on
RFC-v5 code with MST's ACK appended to the initial merge commit."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
tcm_vhost: Initial merge for vhost level target fabric driver
Allow arm_memblock_steal() to remove memory from any RAM region,
including highmem areas. This allows memory to be stolen from the
very top of declared memory, including highmem areas, rather than
our precious lowmem.
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the following compiler warnings:
- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison
of distinct pointer types lacks a cast [enabled by default]
- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison
of distinct pointer types lacks a cast [enabled by default]
Signed-off-by: Joren Van Onder <joren.vanonder@gmail.com>
Acked-By: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's a quote of the comment about the BUG macro from asm-generic/bug.h:
Don't use BUG() or BUG_ON() unless there's really no way out; one
example might be detecting data structure corruption in the middle
of an operation that can't be backed out of. If the (sub)system
can somehow continue operating, perhaps with reduced functionality,
it's probably not BUG-worthy.
If you're tempted to BUG(), think again: is completely giving up
really the *only* solution? There are usually better options, where
users don't need to reboot ASAP and can mostly shut down cleanly.
In our case, the status flag of a ring buffer slot is managed from both sides,
the kernel space and the user space. This means that even though the kernel
side might work as expected, the user space screws up and changes this flag
right between the send(2) is triggered when the flag is changed to
TP_STATUS_SENDING and a given skb is destructed after some time. Then, this
will hit the BUG macro. As David suggested, the best solution is to simply
remove this statement since it cannot be used for kernel side internal
consistency checks. I've tested it and the system still behaves /stable/ in
this case, so in accordance with the above comment, we should rather remove it.
Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu_dereference occurs in update section. Replacement by
rcu_dereference_protected in order to prevent lockdep
complaint.
Found by Linux Driver Verification project (linuxtesting.org)
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no memory allocation failure check in uri_store().
That can lead to NULL pointer dereference.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
- Fix a resource leak in the SCH driver
- Fix the register address calculation in the MSIC driver
- Fix the PXA driver's devicetree functions
- Delete redundant shadow variable leftovers in the MXC driver
- Specify the GPIO base for the device tree probe in the MXC driver
- Add a modalias for the i.MX driver
- Fix off-by-one bug in the Samsung driver
- Fix erroneous errorpath in the Langwell driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=WsZj
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio fixes from Linus Walleij:
- Fix a resource leak in the SCH driver
- Fix the register address calculation in the MSIC driver
- Fix the PXA driver's devicetree functions
- Delete redundant shadow variable leftovers in the MXC driver
- Specify the GPIO base for the device tree probe in the MXC driver
- Add a modalias for the i.MX driver
- Fix off-by-one bug in the Samsung driver
- Fix erroneous errorpath in the Langwell driver
* tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
drivers/gpio/gpio-langwell.c: fix error return code
gpio: samsung: Fix off-by-one bug in gpio addresses
ARM: dts: imx: add alias for gpio
gpio/mxc: specify gpio base for device tree probe
gpio/mxc: remove redundant shadow variables initialization
GPIO: gpio-pxa: fix devicetree functions
gpio: msic: Fix calculating register address in msic_gpio_to_oreg()
gpio-sch: Fix leak of resource
Pull a security subsystem fix from James Morris
"This fixes an issue in the Yama LSM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Yama: higher restrictions should block PTRACE_TRACEME
* Fix for two recent regressions in the generic PM domains framework.
* Revert of a commit that introduced a resume regression and is conceptually
incorrect in my opinion.
* Fix for a return value in pcc-cpufreq.c from Julia Lawall.
* RTC wakeup signaling fix from Neil Brown.
* Suppression of compiler warnings for CONFIG_PM_SLEEP unset in ACPI,
platform/x86 and TPM drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=lo6A
-----END PGP SIGNATURE-----
Merge tag 'pm-for-3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael J. Wysocki:
- Fix for two recent regressions in the generic PM domains framework.
- Revert of a commit that introduced a resume regression and is
conceptually incorrect in my opinion.
- Fix for a return value in pcc-cpufreq.c from Julia Lawall.
- RTC wakeup signaling fix from Neil Brown.
- Suppression of compiler warnings for CONFIG_PM_SLEEP unset in ACPI,
platform/x86 and TPM drivers.
* tag 'pm-for-3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tpm_tis / PM: Fix unused function warning for CONFIG_PM_SLEEP
platform / x86 / PM: Fix unused function warnings for CONFIG_PM_SLEEP
ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEP
Revert "NMI watchdog: fix for lockup detector breakage on resume"
PM: Make dev_pm_get_subsys_data() always return 0 on success
drivers/cpufreq/pcc-cpufreq.c: fix error return code
RTC: Avoid races between RTC alarm wakeup and suspend.
These are a bunch of bug fixes that came in after the merge window and
one update for the MAINTAINERS file. The largest part of the fixes
are patches that address bugs found by building all the ARM defconfig
files. There are a lot more warnings that we have patches for, but
the others are either still under discussion or are harmless and
do not cause actual problems besides making the build slightly noisy.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=TmsX
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc bug fixes from Arnd Bergmann:
"These are a bunch of bug fixes that came in after the merge window and
one update for the MAINTAINERS file.
The largest part of the fixes are patches that address bugs found by
building all the ARM defconfig files. There are a lot more warnings
that we have patches for, but the others are either still under
discussion or are harmless and do not cause actual problems besides
making the build slightly noisy."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
ARM: davinci: remove broken ntosd2_init_i2c
ARM: s3c24xx: enable CONFIG_BUG for tct_hammer
omap-rng: fix use of SIMPLE_DEV_PM_OPS
spi/s3c64xx: improve error handling
mtd/omap2: fix dmaengine_slave_config error handling
gpio: em: do not discard em_gio_irq_domain_cleanup
ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
ARM: imx: gpmi-nand depends on mxs-dma
ARM: integrator: include <linux/export.h>
ARM: s3c24xx: use new PWM driver
ARM: sa1100: include linux/io.h in hackkit leds code
Input: eeti_ts: pass gpio value instead of IRQ
ARM: pxa: remove irq_to_gpio from ezx-pcap driver
ARM: tegra: more regulator fixes for Harmony
usb/ohci-omap: remove unused variable
mfd/asic3: fix asic3_mfd_probe return value
ARM: kirkwood: fix typo in Makefile.boot
i.MX27: Fix emma-prp and csi clocks.
ARM: integrator: use clk_prepare_enable() for timer
MAINTAINERS: update entry for Linus Walleij
...
Pull three dma-mapping fixes from Marek Szyprowski.
* 'fixes-for-linus-for-3.6-rc2' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: fix incorrect freeing of atomic allocations
ARM: dma-mapping: fix atomic allocation alignment
ARM: mm: fix MMU mapping of CMA regions
Pull btrfs merge fix from Chris Mason:
"This fixes a merge error in rc1. The calls to mnt_want_write should
have been removed."
* 'for-linus-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove mnt_want_write call in btrfs_mksubvol
While tracking down a weird buffer overflow issue in a program that
looked to be sane, I started double checking the length returned by
syslog(SYSLOG_ACTION_READ_ALL, ...) to make sure it wasn't overflowing
the buffer.
Sure enough, it was. I saw this in strace:
11339 syslog(SYSLOG_ACTION_READ_ALL, "<5>[244017.708129] REISERFS (dev"..., 8192) = 8279
It turns out that the loops that calculate how much space the entries
will take when they're copied don't include the newlines and prefixes
that will be included in the final output since prev flags is passed as
zero.
This patch properly accounts for it and fixes the overflow.
CC: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support for yet another SAA7146-based budget card (very similar to TT
S2-1600, but use LNBH23 instead ISL6423).
Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver has been replaced by stk1160.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver adds support for stk1160 usb bridge as used in some
video/audio usb capture devices.
It is a complete rewrite of staging/media/easycap driver and
it's meant as a replacement.
As stk1160 allows communication with an ac97 codec chip, this
driver allows to register a control-only sound card to allow the user
to access ac97 controls.
Two devices have been used for testing:
* 1-cvbs video and 1-audio ac97 input,
* 4-cvbs inputs
Both of these devices reports with the same id [05e1:0408],
so the driver tries to support a superset of the capabilities.
By using keep_buffers module parameter it's possible to prevent
the driver from releasing urb buffers when streaming is stopped.
The usage of this parameter can avoid memory fragmentation that may
cause the driver to stop working on low memory systems.
A similar mechanism is implemented in em28xx driver (see commit 86d38d).
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This removes the need for shark_led_work to take the v4l2 lock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Recent kernels properly clear the usb intfdata pointer when another
driver fails to bind (in the radio-shark* case the usbhid driver would try
to bind first.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
qt1010_init_meas2() returns zero on success and negative error codes on
failure so the return type should be int instead of u8.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The MEDIA_IOC_DEVICE_INFO ioctl was returning a positive value rather
than a negative error code when failing to copy output parameter to
user-space.
Tested by compilation only.
Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Those files were at the wrong place, probably due to the usage of a
previous version of dvb-usb-v2 tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Conversion of lmedm04 to dvb-usb-v2
Functional changes m88rs2000 tuner now uses all callbacks.
TODO migrate other tuners to the callbacks.
This patch is applied on top of [BUG] Re: dvb_usb_lmedm04 crash Kernel (rs2000)
http://patchwork.linuxtv.org/patch/13584/
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch fixes the error
drivers/usb/core/hub.c:3753: undefined reference to `usb_speed_string'
seen in various random configurations.
Cc: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This DVB_FE_IOCTL_POST isn't used, so remove it.
Also, intercepting ioctl's like that only works with legacy ioctl's,
due to the way it was implemented. so this design is broken.
Document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
structure variables can be assigned, no memcpy needed,
remove the memcpy and use assignment for the cfg and en variables.
Tested by Compilation Only
Suggested-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
this does kmalloc and followed by memset, calling kzalloc will actually
sets the allocated memory to zero, use kzalloc instead
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The following sparse warnings were fixed
drivers/staging/media/cxd2099/cxd2099.c:686:26: warning: Using plain integer as NULL pointer
drivers/staging/media/cxd2099/cxd2099.c:691:24: warning: Using plain integer as NULL pointer
drivers/staging/media/cxd2099/cxd2099.c:696:24: warning: Using plain integer as NULL pointer
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This was introduced on commit c2a6b54a9:
"em28xx: fix: don't do image interlacing on webcams"
The proposed patch by Ezequiel is wrong. The right fix here is to just
don't bother here if either the image is progressive or not.
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since forcewake is now protected by a spinlock, we don't need to grab
dev->struct_mutex any more. This way we can also get rid of a stale
comment, noticed by Ben Widawsky while reviewing some locking changes.
v2: Kill the unused variable ret, noticed by Fengguang Wu.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix "symbol 'vb2_vmalloc_memops' was not declared. Should it be static?"
sparse warning.
Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is a missing error handling when no firmware file found.
It seems that this is more of a problem with udev-182+.
However, so far udev-182 is only a problem on first ever plug.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
struct v4l2_hw_freq_seek has two new fields that weren't printed in the
logging function. Added.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This code is based on ngene initial check-in (dae52d009f)
Signed-off-by: Patrice Chotard <patricechotard@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When VIDIOC_ENUM_FREQ_BANDS is called for a driver that doesn't supply an
enum_freq_bands op, then it will fall back to reporting a single freq band
based on information from g_tuner or g_modulator.
Due to a bug this is an infinite list since the index field wasn't tested.
This patch fixes this and returns -EINVAL if index != 0.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This remote sends a header pulse of 8150us followed by a space of 4000us.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[mchehab@redhat.com: fix a merge conflict at Documentation/video4linux/v4l2-framework.txt]
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
