Commit graph

336,024 commits

Author SHA1 Message Date
majianpeng
2e8ac30312 md/raid456: When read error cannot be recovered, record bad block
We may not be able to fix a bad block if:
 - the array is degraded
 - the over-write fails.

In these cases we currently eject the device, but we should
record a bad block if possible.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:57:02 +10:00
NeilBrown
0232605d98 md: make 'name' arg to md_register_thread non-optional.
Having the 'name' arg optional and defaulting to the current
personality name is no necessary and leads to errors, as when
changing the level of an array we can end up using the
name of the old level instead of the new one.

So make it non-optional and always explicitly pass the name
of the level that the array will be.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:56:52 +10:00
NeilBrown
055d3747db md/raid10: fix failure when trying to repair a read error.
commit 58c54fcca3
     md/raid10: handle further errors during fix_read_error better.

in 3.1 added "r10_sync_page_io" which takes an IO size in sectors.
But we were passing the IO size in bytes!!!
This resulting in bio_add_page failing, and empty request being sent
down, and a consequent BUG_ON in scsi_lib.

[fix missing space in error message at same time]

This fix is suitable for 3.1.y and later.

Cc: stable@vger.kernel.org
Reported-by: Christian Balzer <chibi@gol.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:55:33 +10:00
Shawn Guo
a915ee4218 ARM: dts: mxs: add lcd support for imx23-evk and imx28-evk
Add lcd support for imx23-evk and imx28-evk.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:27:56 +08:00
Shawn Guo
52f7176bd2 ARM: dts: mxs: add pwm-backlight for imx23-evk and imx28-evk
Add pwm device and pwm-backlight for imx23-evk and imx28-evk.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:26:49 +08:00
Shawn Guo
f98c990c18 ARM: dts: mxs: enable rtc for imx23 and imx28
Enable rtc for imx23 and imx28.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:42 +08:00
Shawn Guo
a600e3335b ARM: dts: imx28-evk: add heartbeat gpio-leds
Add heartbeat gpio-leds for imx28-evk board.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:34 +08:00
Shawn Guo
c9987c8106 ARM: dts: imx28-evk: add missing properties for fec
Add missing properties for fec, phy-supply, phy-reset-gpios and
phy-reset-duration, which are required by fec driver for successfully
probe fec from device tree, if bootloader hasn't set those things up.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:21 +08:00
Shawn Guo
64edbcdd9c ARM: dts: imx28-evk: add vmmc-supply for mmc device
Add vmmc-supply for mmc device, so that the power to mmc slot can be
turned on by mmc driver if bootloader hasn't done it.

Also remove "okay" status for mmc1/ssp1, as the device has pin conflict
with gpmi-nand.  Actually the device is already disabled since the
mxs-mmc driver adopts pinctrl support because there is no pinctrl setup
for the device in dts.  Make this explicit by removing "okay" status.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:12 +08:00
Shawn Guo
a450839432 ARM: dts: imx23-evk: add auart device
Add auart device for imx23-evk board.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:06 +08:00
Shawn Guo
72beabae63 ARM: dts: imx23-evk: updates for mmc device
The 8-bit mode mmc has pin conflicts with display.  Let's use 4-bit
mode by default, so that display can be enabled together later.

Also add vmmc-supply for mmc device.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:00 +08:00
Shawn Guo
d54dbb5000 ARM: dts: mxs: add hog-gpios for imx23-evk and imx28-evk
Before gpio_request can directly ask pinctrl system to configure the
requested pin into gpio mode, we use "hog" entry (pinctrl state of
pin controller itself) to configure gpios.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:24:54 +08:00
Shawn Guo
f14da76788 ARM: dts: mxs: add comments for pinmux-ids
Add comments for pinmux-ids so that we do not have to keep looking at
Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt to read
all these pinmux-ids.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:24:50 +08:00
Shawn Guo
ab2815c399 ARM: mxs: use auxdata to attach mxsfb_platform_data
Use auxdata to attach mxsfb_platform_data for imx23-evk and imx28-evk.
We take this as a temporary solution for removing those board files,
and it should be updated to use common bindings for struct fb_videomode
when it becomes available.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:37 +08:00
Shawn Guo
73fc610f9a video: mxsfb: add simple device tree probe
Add a simple device tree probe support for mxsfb driver.  Before
a common binding for struct fb_videomode is available, the driver will
keep using struct mxsfb_platform_data.  That said, platform code will
use auxdata to attach mxsfb_platform_data for device tree boot.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:37 +08:00
Shawn Guo
ce4409b582 video: mxsfb: move mxsfb.h into include/linux
Move mxsfb.h into include/linux, so that mxsfb driver does not have to
include <mach/*> header.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:37 +08:00
Marek Vasut
dd8d20a3f3 rtc: stmp3xxx: Add simple binding for the stmp3xxx-rtc
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: rtc-linux@googlegroups.com
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Marc Kleine-Budde
e1d4f23ec0 ARM: mxs: enable flexcan on imx28
As the flexcan driver has DT binding for some time now. This patch makes
the flexcan driver available in the can drivers menu if a SOC with flexcan
is enabled.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Maxime Ripard
f34ffc9efc ARM: dts: cfa10036: Add Power LED to the CFA-10036 board
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Maxime Ripard
330eaaf947 ARM: mxs: Add Crystalfontz CFA-10036 DTS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lily <brian@crystalfontz.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Maxime Ripard
8385e7c1db ARM: dts: imx28: Add additionnal muxing options to iMX28 DTSI
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lily <brian@crystalfontz.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Shawn Guo
5653acc24c ARM: mxs: store mac address read from OTP in device tree
The non-DT boot reads the mac from OTP and pass it to fec driver via
platform data.  The patch provides an equivalent support for device
tree boot, with reading mac from OTP and store it in device tree,
and fec driver can get the mac from device tree at its probe time.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Fabio Estevam
80d969e491 ARM: dts: mx28evk: Add auart0 and auart3 support
Add auart0 and auart3 support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Fabio Estevam
1ea6607d4c serial: mxs-auart: Allow device tree probing
Allow device tree probing.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: <linux-serial@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Subodh Nijsure <snijsure@grid-net.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Marek Vasut
a217c46c2e ARM: dts: imx23: Fix the gpmi/gpmi-nand DT name
Replace "gpmi" with "gpmi-nand" to get the
GPMI interface probing with DT instead of
failing to get clock.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
CC: Dong Aisheng <b29396@freescale.com>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:34 +08:00
Huang Shijie
7a8e5149ef ARM: mx28: add gpmi-nand support
add gpmi-nand device tree support.
add gpmi-nand pinctrl support.

Also enable the gpmi support for mx28-evk board.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:34 +08:00
Scott Wood
a8b91e43af powerpc/mm: remove obsolete comment about page size name array
The array of names in hugetlbpage.c no longer exists.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:50 +10:00
Paul Bolle
09d5472a08 powerpc: Kill flatdevtree_env.h too
Commit 430b01e8f5 ("[POWERPC] Kill
flatdevtree.c") killed the two files including flatdevtree_env.h. It was
apparently just an oversight to not kill that header too. Kill it now.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:50 +10:00
Wanpeng Li
f0a875fd3f powerpc: Fix kernel-doc warning
Warning(arch/powerpc/kernel/pci_of_scan.c:210): Excess function parameter 'node' description in 'of_scan_pci_bridge'
Warning(arch/powerpc/kernel/vio.c:636): No description found for parameter 'desired'
Warning(arch/powerpc/kernel/vio.c:636): Excess function parameter 'new_desired' description in 'vio_cmo_set_dev_desired'
Warning(arch/powerpc/kernel/vio.c:1270): No description found for parameter 'viodrv'
Warning(arch/powerpc/kernel/vio.c:1270): Excess function parameter 'drv' description in '__vio_register_driver'
Warning(arch/powerpc/kernel/vio.c:1289): No description found for parameter 'viodrv'
Warning(arch/powerpc/kernel/vio.c:1289): Excess function parameter 'driver' description in 'vio_unregister_driver'

Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:49 +10:00
Bharat Bhushan
a5cb82da78 powerpc: Fix assmption of end_of_DRAM() returns end address
memblock_end_of_DRAM() returns end_address + 1, not end address.
While some code assumes that it returns end address.

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:49 +10:00
Anton Blanchard
cf8fb5533f powerpc: Optimise the 64bit optimised __clear_user
I blame Mikey for this. He elevated my slightly dubious testcase:

to benchmark status. And naturally we need to be number 1 at creating
zeros. So lets improve __clear_user some more.

As Paul suggests we can use dcbz for large lengths. This patch gets
the destination cacheline aligned then uses dcbz on whole cachelines.

Before:
10485760000 bytes (10 GB) copied, 0.414744 s, 25.3 GB/s

After:
10485760000 bytes (10 GB) copied, 0.268597 s, 39.0 GB/s

39 GB/s, a new record.

Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:48 +10:00
Anton Blanchard
b4c3a8729a powerpc/iommu: Implement IOMMU pools to improve multiqueue adapter performance
At the moment all queues in a multiqueue adapter will serialise
against the IOMMU table lock. This is proving to be a big issue,
especially with 10Gbit ethernet.

This patch creates 4 pools and tries to spread the load across
them. If the table is under 1GB in size we revert back to the
original behaviour of 1 pool and 1 largealloc pool.

We create a hash to map CPUs to pools. Since we prefer interrupts to
be affinitised to primary CPUs, without some form of hashing we are
very likely to end up using the same pool. As an example, POWER7
has 4 way SMT and with 4 pools all primary threads will map to the
same pool.

The largealloc pool is reduced from 1/2 to 1/4 of the space to
partially offset the overhead of breaking the table up into pools.

Some performance numbers were obtained with a Chelsio T3 adapter on
two POWER7 boxes, running a 100 session TCP round robin test.

Performance improved 69% with this patch applied.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:48 +10:00
Anton Blanchard
d362213722 powerpc/iommu: Push spinlock into iommu_range_alloc and __iommu_free
In preparation for IOMMU pools, push the spinlock into
iommu_range_alloc and __iommu_free.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:47 +10:00
Anton Blanchard
67ca141567 powerpc/iommu: Reduce spinlock coverage in iommu_free
This patch moves tce_free outside of the lock in iommu_free.

Some performance numbers were obtained with a Chelsio T3 adapter on
two POWER7 boxes, running a 100 session TCP round robin test.

Performance improved 25% with this patch applied.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:47 +10:00
Anton Blanchard
0e4bc95d87 powerpc/iommu: Reduce spinlock coverage in iommu_alloc and iommu_free
We currently hold the IOMMU spinlock around tce_build and tce_flush.
This causes our spinlock hold times to be much higher than required
and can impact multiqueue adapters.

This patch moves tce_build and tce_flush outside of the lock in
iommu_alloc, and tce_flush outside of the lock in iommu_free.

Some performance numbers were obtained with a Chelsio T3 adapter on
two POWER7 boxes, running a 100 session TCP round robin test.

Performance improved 32% with this patch applied.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:47 +10:00
Anton Blanchard
c1703e85a7 powerpc/pseries: Disable interrupts around IOMMU percpu data accesses
tce_buildmulti_pSeriesLP uses a per cpu page to communicate with the
hypervisor. We currently rely on the IOMMU table spinlock but
subsequent patches will be removing that so disable interrupts
around all accesses of tce_page.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:46 +10:00
Anton Blanchard
b3f271e86e powerpc: POWER7 optimised memcpy using VMX and enhanced prefetch
Implement a POWER7 optimised memcpy using VMX and enhanced prefetch
instructions.

This is a copy of the POWER7 optimised copy_to_user/copy_from_user
loop. Detailed implementation and performance details can be found in
commit a66086b819 (powerpc: POWER7 optimised
copy_to_user/copy_from_user using VMX).

I noticed memcpy issues when profiling a RAID6 workload:

	.memcpy
	.async_memcpy
	.async_copy_data
	.__raid_run_ops
	.handle_stripe
	.raid5d
	.md_thread

I created a simplified testcase by building a RAID6 array with 4 1GB
ramdisks (booting with brd.rd_size=1048576):

# mdadm -CR -e 1.2 /dev/md0 --level=6 -n4 /dev/ram[0-3]

I then timed how long it took to write to the entire array:

# dd if=/dev/zero of=/dev/md0 bs=1M

Before: 892 MB/s
After:  999 MB/s

A 12% improvement.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:46 +10:00
Anton Blanchard
bce4b4bd91 powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user
Version 2.06 of the POWER ISA introduced enhanced touch instructions,
allowing us to specify a number of attributes including the length of
a stream.

This patch adds a software stream for both loads and stores in the
POWER7 copy_tofrom_user loop. Since the setup is quite complicated
and we have to use an eieio to ensure correct ordering of the "GO"
command we only do this for copies above 4kB.

To quantify any performance improvements we need a working set
bigger than the caches so we operate on a 1GB file:

# dd if=/dev/zero of=/tmp/foo bs=1M count=1024

And we compare how fast we can read the file:

# dd if=/tmp/foo of=/dev/null bs=1M

before: 7.7 GB/s
after:  9.6 GB/s

A 25% improvement.

The worst case for this patch will be a completely L1 cache contained
copy of just over 4kB. We can test this with the copy_to_user
testcase we used to tune copy_tofrom_user originally:

http://ozlabs.org/~anton/junkcode/copy_to_user.c

# time ./copy_to_user2 -l 4224 -i 10000000

before: 6.807 s
after:  6.946 s

A 2% slowdown, which seems reasonable considering our data is unlikely
to be completely L1 contained.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:45 +10:00
Gavin Shan
8127e723da powerpc/pci: cleanup on duplicate assignment
While creating the PCI root bus through function pci_create_root_bus()
of PCI core, it should have assigned the secondary bus number for the
newly created PCI root bus. Thus we needn't do the explicit assignment
for the secondary bus number again in pcibios_scan_phb().

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:45 +10:00
Gavin Shan
5b958a7eef powerpc/numa: Fix OF node refcounting bug
The form affinity for NUMA is set to 1 if the firmware supports
OPAL. Otherwise, we have to retrieve that from OF node "/chosen".
For the latter case, OF node "/chosen" reference count was never
decreased.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:44 +10:00
Anton Blanchard
fde69282b7 powerpc: POWER7 optimised copy_page using VMX and enhanced prefetch
Implement a POWER7 optimised copy_page using VMX and enhanced
prefetch instructions. We use enhanced prefetch hints to prefetch
both the load and store side. We copy a cacheline at a time and
fall back to regular loads and stores if we are unable to use VMX
(eg we are in an interrupt).

The following microbenchmark was used to assess the impact of
the patch:

http://ozlabs.org/~anton/junkcode/page_fault_file.c

We test MAP_PRIVATE page faults across a 1GB file, 100 times:

# time ./page_fault_file -p -l 1G -i 100

Before: 22.25s
After:  18.89s

17% faster

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:44 +10:00
Anton Blanchard
6f7839e542 powerpc: Rename copyuser_power7_vmx.c to vmx-helper.c
Subsequent patches will add more VMX library functions and it makes
sense to keep all the c-code helper functions in the one file.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:43 +10:00
Anton Blanchard
ac1dc36558 powerpc: Clear RI and EE at the same time in system call exit
mtmsrd is an expensive instruction, we save a few cycles by
doing it once instead of twice.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:43 +10:00
Anton Blanchard
a9514dc69d powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user
Version 2.06 of the POWER ISA introduced enhanced touch instructions,
allowing us to specify a number of attributes including the length of
a stream.

This patch adds a software stream for both loads and stores in the
POWER7 copy_tofrom_user loop. Since the setup is quite complicated
and we have to use an eieio to ensure correct ordering of the "GO"
command we only do this for copies above 4kB.

To quantify any performance improvements we need a working set
bigger than the caches so we operate on a 1GB file:

# dd if=/dev/zero of=/tmp/foo bs=1M count=1024

And we compare how fast we can read the file:

# dd if=/tmp/foo of=/dev/null bs=1M

before: 7.7 GB/s
after:  9.6 GB/s

A 25% improvement.

The worst case for this patch will be a completely L1 cache contained
copy of just over 4kB. We can test this with the copy_to_user
testcase we used to tune copy_tofrom_user originally:

http://ozlabs.org/~anton/junkcode/copy_to_user.c

# time ./copy_to_user2 -l 4224 -i 10000000

before: 6.807 s
after:  6.946 s

A 2% slowdown, which seems reasonable considering our data is unlikely
to be completely L1 contained.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:42 +10:00
Yong Zhang
e250d4bca6 powerpc/smp: remove call to ipi_call_lock()/ipi_call_unlock()
1) call_function.lock used in smp_call_function_many() is just to protect
   call_function.queue and &data->refs, cpu_online_mask is outside of the
   lock. And it's not necessary to protect cpu_online_mask,
   because data->cpumask is pre-calculate and even if a cpu is brougt up
   when calling arch_send_call_function_ipi_mask(), it's harmless because
   validation test in generic_smp_call_function_interrupt() will take care
   of it.

2) For cpu down issue, stop_machine() will guarantee that no concurrent
   smp_call_fuction() is processing.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:42 +10:00
Anton Blanchard
17968fbbd1 powerpc: 64bit optimised __clear_user
I noticed __clear_user high up in a profile of one of my RAID stress
tests. The testcase was doing a dd from /dev/zero which ends up
calling __clear_user.

__clear_user is basically a loop with a single 4 byte store which
is horribly slow. We can do much better by aligning the desination
and doing 32 bytes of 8 byte stores in a loop.

The following testcase was used to verify the patch:

http://ozlabs.org/~anton/junkcode/stress_clear_user.c

To show the improvement in performance I ran a dd from /dev/zero
to /dev/null on a POWER7 box:

Before:

# dd if=/dev/zero of=/dev/null bs=1M count=10000
10485760000 bytes (10 GB) copied, 3.72379 s, 2.8 GB/s

After:

# time dd if=/dev/zero of=/dev/null bs=1M count=10000
10485760000 bytes (10 GB) copied, 0.728318 s, 14.4 GB/s

Over 5x faster.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:41 +10:00
Anton Blanchard
d136e27326 powerpc: tracing: Avoid tracepoint duplication with DECLARE_EVENT_CLASS
irq_entry, irq_exit, timer_interrupt_entry and timer_interrupt_exit
all do the same thing so use DECLARE_EVENT_CLASS to avoid duplicating
everything 4 times.

This saves quite a lot of space in both instruction text and data:

   text    data     bss     dec     hex filename
   9265   19622      16   28903    70e7 arch/powerpc/kernel/irq.o
   6817   19019      16   25852    64fc arch/powerpc/kernel/irq.o

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:41 +10:00
Anton Blanchard
641bd53a61 powerpc: Enable jump label support
When looking through some instruction traces I noticed our tracepoint
checks were inline. It turns out we don't have CONFIG_JUMP_LABEL
enabled.

By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with
a nop at every tracepoint call. For example in do_IRQ:

CONFIG_JUMP_LABEL disabled:
        stdx 3,11,9
        lwz 0,8(29)
        cmpwi 7,0,0
        bne- 7,.L124
        bl .irq_enter

CONFIG_JUMP_LABEL enabled:
        stdx 3,11,9
        nop
        bl .irq_enter

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:40 +10:00
Deepthi Dharwar
16aaaff684 powerpc/pseries/cpuidle: Replace pseries_notify_cpuidle_add call with notifier
The following patch is to remove the pseries_notify_add_cpu() call
and replace it by a hot plug notifier.

This would prevent cpuidle resources being released and allocated each
time cpu comes online on pseries.

The earlier design was causing a lockdep problem
in start_secondary as reported on this thread
	-https://lkml.org/lkml/2012/5/17/2

This applies on 3.4-rc7

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:40 +10:00
Nishanth Aravamudan
25ebc45b93 powerpc/pseries/iommu: remove default window before attempting DDW manipulation
An upcoming release of firmware will add DDW extensions, in particular
an API to "reset" the DMA window to the original configuration (32-bit,
2GB in size). With that API available, we can safely remove the default
window, increasing the resources available to firmware for creation of
larger windows for the slot in question -- if we encounter an error, we
can use the new API to reset the state of the slot.

Further, this same release of firmware will make it a hard requirement
for OSes to release the existing window before any other windows will be
shown as available, to avoid conflicts in addressing between the two
windows.

In anticipation of these changes, always remove the default window
before we do any DDW manipulations.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:39 +10:00