Commit graph

336,024 commits

Author SHA1 Message Date
Ben Widawsky
fe1cc68fcb drm/i915: CXT_SIZE register offsets added
The GPUs can have different default context layouts, and the sizes could
vary based on platform or BIOS. In order to back the context object with
a properly sized BO, we must read this register in order to find out a
sufficient size.

Thankfully (sarcarm!), the register moves and changes meanings
throughout generations.

CTX and CXT differences are intentional as that is how it is in the
documentation (prior to GEN6 it was CXT).

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:16 +02:00
Vishal Agarwal
f960727e6c Bluetooth: Fix sending HCI_Disconnect only when connected
HCI_Disconnect should only be sent after connection is established.
If connection is not yet established and HCI_Disconnect is called
then disconnection complete will be received with a handle which
does not exist and hence this event will be ignored.
But as mgmt.c will not receive this event, its variable for pending
command is not cleared.This will result in future Disconnect commands
for that BD Address to be blocked with error busy.

Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-14 12:19:39 -03:00
Alexandre Pereira da Silva
df072717eb ARM: LPC32xx: Move i2s1 dma enabling to clock.c
Move i2s1 dma init to be done when it's clock is enabled.

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:19 +02:00
Alexandre Pereira da Silva
5fe8f11ccb ARM: LPC32xx: Move uart6 irda disable to serial.c
Move the irda configuration to serial.c where other special cases are
handled

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:19 +02:00
Alexandre Pereira da Silva
112e9adda4 ARM: LPC32xx: Cleanup board init, remove duplicate clock init
Remove SSP0, CLCD and DMA clocks that are already migrated to
the clock framework.

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:19 +02:00
Alexandre Pereira da Silva
72b78cf713 ARM: LPC32xx: Remove spi chip definitions
Leave chipselect and spi devices binding to the devicetree

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:19 +02:00
Alexandre Pereira da Silva
c05a8b145c ARM: LPC32xx: Remove spi chipselect request from board init
The lpc32xx spi0 chipselect will be requested directly from the
pl022 driver

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:19 +02:00
Alexandre Pereira da Silva
2e0b5a3752 ARM: LPC32xx: Add dt settings to the at25 node
Add the reg, cs-gpios and max-frequencies that are needed for spi
device registry in phy3250.
Adds also the pl022 internal transfers details via dt

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:19 +02:00
Alexandre Pereira da Silva
1440837440 ARM: LPC32xx: Build arch dtbs
Add ea3250.dtb and phy3250.dtb to the list of dtbs to be built

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:18 +02:00
Roland Stigge
cb85a9e508 ARM: LPC32xx: Fix lpc32xx.dtsi status property: "disable" -> "disabled"
This patches fixes some status = "disable" strings to "disabled", the correct
way of disabling nodes in the devicetree.

Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:18 +02:00
Roland Stigge
1a6e29c913 ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default
ARCH_NR_GPIOS was defined statically to include exactly all SoC specific GPIOs.
Now if additional GPIOs need to be added dynamically, e.g. via DT, none are
available. Removing the mach specific setting, leaving ARCH_NR_GPIOS to the
default of 256 (currently in include/asm-generic/gpio.h).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:18 +02:00
Roland Stigge
ac5ced91aa ARM: LPC32xx: High Speed UART configuration via DT
This patch fixes the DTS files for the High Speed UARTs 1, 2 and 7 of the
LPC32xx SoC, adjusting the compatible strings, adding interrupts and status
configuration. On the PHY3250 reference board, UART2 is enabled.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:18 +02:00
Roland Stigge
c70426f153 ARM: LPC32xx: DT conversion of Standard UARTs
This patch switches from static serial driver initialization to devicetree
configuration. This way, the Standard UARTs of the LPC32xx SoC can be enabled
individually via DT.

E.g., instead of Kconfig configuration, the phy3250.dts activates
UARTs 3 and 5.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:18 +02:00
Roland Stigge
2c7fa28622 ARM: LPC32xx: DTS adjustment for using pl18x primecell
This patch adjusts the dts files to reference the pl18x primecell driver
correctly.

Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:18 +02:00
Roland Stigge
291dd71fe4 ARM: LPC32xx: Add MMC controller support
This patch adds support for the MMC controller of the LPC32xx SoC to the
platform initialization via the pl08x primecell driver. Lacking more complete
DT support, done via DT auxdata.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:17 +02:00
Roland Stigge
360c9627cc ARM: LPC32xx: Defconfig update
This defconfig update for the LPC32xx SoC platform adds the new drivers in v3.5
and drivers typically used in systems with the LPC32xx chip.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:17 +02:00
Roland Stigge
821e7edd51 ARM: LPC32xx: Clock adjustment for key matrix controller
The clock.c file needs to be changed to match the automatic device name to its
clock.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-06-14 16:16:17 +02:00
Roland Stigge
a6d1be0e58 ARM: LPC32xx: DTS adjustment for key matrix controller
This patch connects the lpc32xx-key driver to the LPC32xx platform (via
lpc32xx.dtsi), and more specifically to the reference board via its dts file.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:17 +02:00
Roland Stigge
d0408713e7 ARM: LPC32xx: Add dts for EA3250 reference board
There is another reference/development board for the LPC32xx SoC (besides the
Phytec 3250): The Embedded Artists LPC3250 board. This patch adds a default dts
file for it.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:17 +02:00
Roland Stigge
6d1c3e93e3 ARM: LPC32xx: Adjust dtsi file for MLC controller configuration
This patch takes into account that the MTD NAND MLC controller needs more
registers, located actually before the previously allocated memory range,
already starting at 200a8000 instead of 200b0000.

Further, the interrupt for the controller is configured.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:17 +02:00
Roland Stigge
d807af4793 ARM: LPC32xx: Add DMA configuration to platform data
This patch adds DMA channel configuration to the LPC32xx platform file.  The
configured DMA signalling is generic for LPC32xx SoC and is not board specific.

Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:17 +02:00
Roland Stigge
ba225a0ea2 ARM: LPC32xx: Remove SLC controller initialization from platform init
Since we now support two MTD NAND controllers (MLC and SLC) for LPC32xx via DT,
we don't initialize the SLC controller statically anymore, but do it via the
clock setup (see previous patch).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:16 +02:00
Roland Stigge
b27f48227c ARM: LPC32xx: Clock initialization for NAND controllers
This patch adds clock initialization for the MLC NAND controller of the LPC32xx
SoC and adjusts it for the SLC controller.

Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-06-14 16:16:16 +02:00
Roland Stigge
15ab218318 ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts
This patch adds necessary NAND flash timings to the board specific dts file of
the PHY3250 reference board of the LPC32xx SoC.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-06-14 16:16:16 +02:00
Mircea Gherzan
2bea29b774 ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X support
JIT support for the XOR operation introduced by the commit
ffe06c17af.

Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-14 15:12:13 +01:00
Rabin Vincent
2307574a50 ARM: 7423/1: kprobes: run t32_simulate_ldr_literal() without insn slot
t32_simulate_ldr_literal() can be run without an instruction slot, so it
should be using DECODE_SIMULATEX instead of DECODE_EMULATEX.

Acked-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-14 15:11:44 +01:00
Lee Jones
b9b52918ab ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree boot
When booting with Device Tree enabled, platform specific information
is gathered by parsing the DT binary. Platform data is subsequently
populated with the result. The memory required for this is not
automatically allocated during Device Tree boot, so we'll do it here
instead.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-14 15:11:05 +01:00
Linus Torvalds
424d54d2dc Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Marcelo Tosatti:
 "Fix a spurious warning on CPU offline path"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86: kvmclock: remove check_and_clear_guest_paused warning
2012-06-14 15:46:59 +03:00
Linus Torvalds
0953135956 pinctrl fixes for v3.5 rc series:
- section markup fixes
 - clk_prepare() fix to conform to the clk API
 - memory leaks
 - incorrect debug messages
 - bad errorpaths
 - typos
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJP2ZIRAAoJEEEQszewGV1zJEsP/jwNNj1+OvGYiOg+Tn29wc0q
 J02EJGb0mNCPX8JzWpKSXoEdCzqbmqdjR7zfmetQV1GpiUgidrnIjyLnUCXZnNaF
 2z210SoOWKnats9kvwdbptZ/xY/o1Ncdlfw2QgLiX6gx+bRmyNWR/4IOilsNMywA
 u7gPcfGGNgidUCAjNz5tFS5o8kFI+Z9FF/7f8gs4TAT70k40n79RGpgW7gA2PhR8
 c8WcJk2TOBThMdSl07JKChTtBtU1ZrPrv8quuk6+voPJa71nJfHNYkAd78cegOBS
 5pfh0rCGElHDMfZ5DdFBsFL1ETxni0mSziBIdgnBX85Ll/wJH6tEPjcVA1sv8Jka
 kLm61XKsDwV+A0KibgmGPSu6nYqGZMaAsvJPSWJjXcPcS3VhXK4lly3OCD1KB6U+
 5u6hD+yavYX8mpEOik3y9pnKYS80d8zvR22/jGpqTByG3DbLwAlLzen7iWHqAbLG
 JJLpD6pxkVA15x+TkS3I1kBMzjM5G11AjticgIxAfx4pSqL/n0CJ1m9tXQ1X7iis
 Kl526ZWxh+GDy9/cM/AqjEJYoefmcCTv1wSieWVsgEKc7+tut47rdaNa4eC+jqho
 NprmfhS16na5GCagh0yI+YXl+nK0Kd9oWoGiJqQcS67UZEn06SzRNdABBPa5OO1F
 ZVfnheS1t4UVw/E5Gmz2
 =F/II
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 - section markup fixes
 - clk_prepare() fix to conform to the clk API
 - memory leaks
 - incorrect debug messages
 - bad errorpaths
 - typos

* tag 'pinctrl-fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: pinctrl-mxs: set platform driver data to NULL at errpath and at unregister
  pinctrl: pinctrl-mxs: Take care of frees if the kzalloc fails
  pinctrl: pinctrl-imx: fix incorrect debug message of maps
  pinctrl: pinctrl-imx: free if of_get_parent fails to get the parent node
  pinctrl: pinctrl-imx: free allocated pinctrl_map structure only once and use kernel facilities for IMX_PMX_DUMP
  pinctrl: nomadik: fix up typo
  pinctrl: nomadik: add clk_prepare() call
  pinctrl: fix a minor harmless typo
  pinctrl: sirf: mark of_device_id match table as __devinitconst
2012-06-14 15:43:32 +03:00
Linus Torvalds
b532ff20bc Sound fixes for 3.5-rc3
- Fix a regression of USB-audio PCM assignment since 3.4
 - A few VGA-switcheroo-related fixes for proper HDMI audio enablement
 - Fixed the missing initializations of HD-audio verbs, which may have
   resulted in various breakage
 - Some driver-specific ASoC updates
 - A few fixes for the dynamic PCM code
 - The addition of pinctrl support for the i.MX audmux which didn't make it
   into -rc1 due to cross tree dependency issues
 - A few minor fixes in compress API codes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJP2KtCAAoJEGwxgFQ9KSmkCosQAIKjgSBIT9JMZ714q2LkyZkb
 bo+Rr4N/WKq7E2xV/2nsziWhZoPlInws+hYvFx8eFP84gKlGUCZyJwV5Rzn37h3W
 IK6ACkgDD3f9U50oO9jwM2M6lFxpu+4LJPIJEewYAfhtr9gLv9uxALDhocfhg6Gd
 H+IaYdCKZxffCaXTNUiLURoEDA+qp7/T4d5CHuc7/l/RRCb2n7ZaKXoreCvon+iK
 h6I3J91MdudDvn6X+h7KFOIq01L5R5gp3ml+T7REg9rNB2aQk9UGo+qBqsKEoihO
 /7Ih0pvny167dVZJKGzjh3uM7G7cnLcnhmc88jFFRhRooETNDwk1Qz3V+ur+sSdw
 rkoNicdgujXRsuPr+xqmWYRZrfmeBZ3SJWEA+aFA8pRhrU/WrbNAaj7EBVc0Gq3f
 p1rEZ4t16Qqj+1Px+xHUEMjOidF1voCX3NiWZrfYBqO8AheerrNKe6zmCY20cRaC
 4PYWJYzRui9rec1Ic5fW/7BWqWEv+2rAoBdisZmVAqjNEUlP/pHEdi4OTmCL8ss0
 hrp0BLksfeedDcVhdVSQG6UjA4U6IOcA528Z731FGZ5QP7ZZ3IdwvuZFiact5QHx
 HbBTjCYR52VsmTPSWJpQ5rc5Kq0lBz5VayTrTIt0f9nom7Qm7RgiFatDkMeObwgm
 Ncwa8CIInqsFq384g4E4
 =Hrh7
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:

 - Fix a regression of USB-audio PCM assignment since 3.4
 - A few VGA-switcheroo-related fixes for proper HDMI audio enablement
 - Fixed the missing initializations of HD-audio verbs, which may have
   resulted in various breakage
 - Some driver-specific ASoC updates
 - A few fixes for the dynamic PCM code
 - The addition of pinctrl support for the i.MX audmux which didn't make
   it into -rc1 due to cross tree dependency issues
 - A few minor fixes in compress API codes

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Don't forget to call init verbs added by fixup list
  ALSA: HDA: Pin fixup for Zotac Z68 motherboard
  ALSA: compress_core: cleanup pointers on stop
  ALSA: compress_core: don't wake up on pause
  ALSA: hda - Fix detection of Creative SoundCore3D controllers
  vga_switcheroo: Enable/disable audio clients at the right time
  ALSA: hda - HDMI Audio init all connectors when VGA-switcheroo is off
  vga_switcheroo: Fix error without CONFIG_VGA_SWITCHEROO
  ALSA: hda - Fix uninitialized HDMI controllers with VGA-switcheroo
  vga_switcheroo: Add a helper function to get the client state
  ALSA: usb-audio: Fix substream assignments
  ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahub
  ASoC: wm2000: Always use a 4s timeout for the firmware
  ASoC: dapm: Fix input list to use source widgets
  ASoC: dpcm: Fix dpcm_get_be() to check that DAI is BE
  ASoC: wm8994: Apply volume updates with clocks enabled
  ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variants
  ASoC: imx-audmux: add pinctrl support
  ASoC: dapm: Fix connected widget capture path query.
2012-06-14 15:38:48 +03:00
Linus Torvalds
fea7c7830d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David S. Miller:

This has the fix for the wireless issues I ran into the other week as
well as:

 1) Fix CAN c_can driver transmit handling resulting in BUG check
    triggers, from AnilKumar Ch.

 2) Fix packet drop monitor sleeping in atomic context, from Eric
    Dumazet.

 3) Fix mv643xx_eth driver build regression, from Andrew Lunn.

 4) Inetpeer freeing needs an RCU grace period in order to avoid races
    during tree invalidation.  From Eric Dumazet.

 5) Fix endianness bugs in xt_HMARK netfilter module, from Hans
    Schillstrom.

 6) Add proper module refcounting to l2tp_eth to avoid crash on module
    unload, from Eric Dumazet.

 7) Fix truncation of neighbour entry dumps due to logic errors in
    neigh_dump_info() and friends, from Eric Dumazet.

 8) The conversion of fib6_age() to dst_neigh_lookup() accidently
    reversed the logic of a flags test, fix from Thomas Graf.

 9) Fix checksum configuration in newer sky2 chips, from Stephen
    Hemminger.

10) Revert BQL support in NIU driver, doesn't work.

11) l2tp_ip_sendmsg() illegally uses a route without a proper reference.
    From Eric Dumazet.

12) be2net driver references an SKB after it's potentially been freed,
    also from Eric Dumazet.

13) Fix RCU stalls in dummy net driver init.  Also from Eric Dumazet.

14) lpc_eth has several bugs in it's transmit engine leading to packet
    leaks and improper queue wakes, from Eric Dumazet.

15) Apply short DMA workaround to more tg3 chips, from Matt Carlson.

16) Add tilegx network driver.

17) Bonding queue mapping for a packet can get corrupted, fix from Eric
    Dumazet.

18) Fix bug in netpoll_send_udp() SKB management that can leave garbage
    in the payload in certain situations.  From Eric Dumazet.

19) bnx2x driver interprets chip RX checksum offload incorrectly in
    encapsulation situations.  Fix from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  bnx2x: fix checksum validation
  netpoll: fix netpoll_send_udp() bugs
  bonding: Fix corrupted queue_mapping
  bonding:record primary when modify it via sysfs
  tilegx network driver: initial support
  tg3: Apply short DMA frag workaround to 5906
  net: stmmac: Fix clock en-/disable calls
  lpc_eth: fix tx completion
  lpc_eth: add missing ndo_change_mtu()
  dummy: fix rcu_sched self-detected stalls
  net: Reorder initialization in ip_route_output to fix gcc warning
  virtio-net: fix a race on 32bit arches
  r8169: avoid NAPI scheduling delay.
  net: Make linux/tcp.h C++ friendly (trivial)
  netdev: fix drivers/net/phy/ kernel-doc warnings
  net/core: fix kernel-doc warnings
  be2net: fix a race in be_xmit()
  l2tp: fix a race in l2tp_ip_sendmsg()
  mac80211: add back channel change flag
  NFC: Fix possible NULL ptr deref when getting the name of a socket
  ...
2012-06-14 15:33:55 +03:00
Marek Szyprowski
c080e26edc x86: dma-mapping: fix broken allocation when dma_mask has been provided
Commit 0a2b9a6ea9 ("X86: integrate CMA with DMA-mapping subsystem")
broke memory allocation with dma_mask. This patch fixes possible kernel
ops caused by lack of resetting page variable when jumping to 'again' label.

Reported-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
2012-06-14 14:01:30 +02:00
Kalle Valo
d987dd137b Merge remote branch 'wireless-next/master' into ath6kl-next
Conflicts:
	drivers/net/wireless/ath/ath6kl/cfg80211.c
2012-06-14 14:44:49 +03:00
David Henningsson
80c8bfbe76 ALSA: HDA: Create phantom jacks for fixed inputs and outputs
PulseAudio sometimes have difficulties knowing that there is a
"Speaker" or "Internal Mic", if they have no individual volume
controls or selectors. As a result, only e g "Headphone" might
be created for a laptop, but no "Speaker".
To help out, create phantom jacks (that are always present,
at least for now) for "Speaker", "Internal Mic" etc, in case we
detect them.
The naming convention is e g "Speaker Phantom Jack".

In order not to pollute the /dev/input namespace with even more
devices, these are added to the kcontrols only, not the input devices.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-14 12:59:35 +02:00
Thomas Pedersen
c85251f856 ath6kl: fix fw capability parsing
This patch fixes a bug where no capabilites are parsed when the number
of firmware capability bits translate into fewer bytes than the host has
knowledge of. Instead just process number of capability bytes as
reported by the firmware.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-06-14 13:54:42 +03:00
Alexander Gordeev
5a0a2a3081 x86/apic/es7000: Make apicid of a cluster (not CPU) from a cpumask
cpu_mask_to_apicid_and() always returns apicid of a single CPU,
even in case multiple CPUs were requested. This update fixes a
typo and forces apicid of a cluster to be returned.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614075043.GI3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:16 +02:00
Alexander Gordeev
214e270b5f x86/apic/es7000+summit: Always make valid apicid from a cpumask
In case of invalid parameters cpu_mask_to_apicid_and() might
return apicid value of 0 (on Summit) or a uninitialized value
(on ES7000), although it is supposed to return apicid of cpu-0
at least. Fix the operation to always return a valid apicid.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614075026.GH3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:15 +02:00
Alexander Gordeev
49ad3fd483 x86/apic/es7000+summit: Fix compile warning in cpu_mask_to_apicid()
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614075010.GG3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:15 +02:00
Alexander Gordeev
ea3807ea52 x86/apic: Fix ugly casting and branching in cpu_mask_to_apicid_and()
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614074954.GF3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:14 +02:00
Alexander Gordeev
a5a391561b x86/apic: Eliminate cpu_mask_to_apicid() operation
Since there are only two locations where cpu_mask_to_apicid() is
called from, remove the operation and use only
cpu_mask_to_apicid_and() instead.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Suggested-and-acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614074935.GE3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:13 +02:00
Alexander Gordeev
cac4afbc3d x86/x2apic/cluster: Vector_allocation_domain() should return a value
Since commit 8637e38 ("x86/apic: Avoid useless scanning thru a
cpumask in assign_irq_vector()") vector_allocation_domain()
operation indicates if a cpumask is dynamic or static. This
update fixes the oversight and makes the operation to return a
value.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614103933.GJ3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:12 +02:00
Vlad Zolotarov
0816b0f036 x86: Add read_mostly declaration/definition to variables from smp.h
Add "read-mostly" qualifier to the following variables in
smp.h:

 - cpu_sibling_map
 - cpu_core_map
 - cpu_llc_shared_map
 - cpu_llc_id
 - cpu_number
 - x86_cpu_to_apicid
 - x86_bios_cpu_apicid
 - x86_cpu_to_logical_apicid

As long as all the variables above are only written during the
initialization, this change is meant to prevent the false
sharing. More specifically, on vSMP Foundation platform
x86_cpu_to_apicid shared the same internode_cache_line with
frequently written lapic_events.

From the analysis of the first 33 per_cpu variables out of 219
(memories they describe, to be more specific) the 8 have read_mostly
nature (tlb_vector_offset, cpu_loops_per_jiffy, xen_debug_irq, etc.)
and 25 are frequently written (irq_stack_union, gdt_page,
exception_stacks, idt_desc, etc.).

Assuming that the spread of the rest of the per_cpu variables is
similar, identifying the read mostly memories will make more sense
in terms of long-term code maintenance comparing to identifying
frequently written memories.

Signed-off-by: Vlad Zolotarov <vlad@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Cc: Shai Fultheim (Shai@ScaleMP.com) <Shai@scalemp.com>
Cc: ido@wizery.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1719258.EYKzE4Zbq5@vlad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:42:11 +02:00
Ido Yariv
c35f77417e x86: Define early read-mostly per-cpu macros
Some read-mostly per-cpu data may need to be declared or defined
early, so it can be initialized and accessed before per_cpu
areas are allocated.

Only the data that resides in the per_cpu areas should be
read-mostly, as there is little benefit in optimizing cache
lines on initialization.

Signed-off-by: Ido Yariv <ido@wizery.com>
[ Added the missing declarations in !SMP code. ]
Signed-off-by: Vlad Zolotarov <vlad@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/46188571.ddB8aVQYWo@vlad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:42:10 +02:00
Felipe Balbi
6b03b13336 usb: otg: twl: add missing IRQF_ONESHOT
this patch fixes the following warning:

[    2.825378] genirq: Threaded irq requested \
	with handler=NULL and !ONESHOT for irq 363

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-14 13:27:12 +03:00
Don Zickus
a702704682 watchdog: Quiet down the boot messages
A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).

This is my attempt to quiet them down and keep it less confusing
for the end user.  What I did is print the message for cpu0 and
save it for future comparisons.  If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.

Before the change, you would see something like:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1
    NMI watchdog enabled, takes one hw-pmu counter.
     #2
    NMI watchdog enabled, takes one hw-pmu counter.
     #3 Ok.
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 4 CPUs
    Total of 4 processors activated (22607.24 BogoMIPS).

After the change, it is simplified to:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs

V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups

Reported-and-tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:20:50 +02:00
Jacob Keller
1d1a79b5b9 ixgbe: Check PTP Rx timestamps via BPF filter
This patch fixes a potential Rx timestamp deadlock that causes the Rx
timestamping to stall indefinitely. The issue could occur when a PTP packet is
timestamped by hardware but never reaches the Rx queue. In order to prevent a
permanent loss of timestamping, the RXSTMP(L/H) registers have to be read to
unlock them. (This used to only occur when a packet that was timestamped
reached the software.) However the registers can't be read early otherwise
there is no way to correlate them to the packet.

This patch introduces a filter function which can be used to determine if a
packet should have been timestamped. Supplied with the filter setup by the
hwtstamp ioctl, check to make sure the PTP protocol and message type match the
expected values. If so, then read the timestamp registers (to free them.) At
this point check the descriptor bit, if the bit is set then we know this
packet correlates to the timestamp stored in the RXTSTAMP registers.
Otherwise, assume that packet was dropped by the hardware, and ignore this
timestamp value. However, we have at least unlocked the rxtstamp registers for
future timestamping.

Due to the way the driver handles skb data, it cannot be directly accessed. In
order to work around this, a copy of the skb data into a linear buffer is
made. From this buffer it becomes possible to read the data correctly

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-14 03:13:48 -07:00
Jacob Keller
c19197a786 ixgbe: PTP Fix hwtstamp mode settings
When enabling the hwtstamp mode for Rx timestamping the V2 ptp event type
specific modes (Delay Request and Sync) have been rolled into the V2 all event
packet modes, in order to more accurately represent what hardware is doing.
Hardware always timestamps the Path delay packets when a V2 mode is selected,
regardless of what type was selected (in order to always support Path delay
mode). However this means the user selected modes of timestamping only Sync or
Delay Request is not truly supported. This patch correctly sets the mode for
the hwtstamp config and returns to the user that all V2 event packets will be
timestamped.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-14 03:13:22 -07:00
Jacob Keller
0ede4a606a ixgbe: ptp code cleanup
This patch fixes two minor nits from Richard Cochran. The first is a case of
ambitious line wrapping that wasn't necessary. The second is to re-order the
flag checks for PPS support. Previously, the hardware test was done first, and
the interrupt flag test was done second. Now, test the interrupt flag and use
the unlikely macro.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-14 03:13:06 -07:00
Emil Tantilov
6cbc52ef10 ixgbe: do not compile ixgbe_sysfs.c when CONFIG_IXGBE_HWMON is not set
ixgbe_sysfs.c is only needed when CONFIG_IXGBE_HWMON is configured in the
kernel.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Acked-by: Don Skidmore <Donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-14 03:12:41 -07:00
John Fastabend
4f8a91ad9a ixgbe: align flow control DV macros with datasheet
The flow control DV macros are used to calculate the flow control
high and low thresholds. This patch annotates these macros slightly
better and fixes the issues below.

The macro variables are renamed LINK to _max_frame_link and TC to
_max_frame_tc. This was to avoid confusion and make them more
readable. It was found that people auditing the code read TC to be
'traffic class' in the 802.1Q definition instead of the max frame
size of the tc. Hopefully it is clear now.

This audit also found the following real deviations from the
theoretical values. Fixed in this patch.

  * I multiplied the DV calculations by (36/25) which always
    evaluates to 1. This does not match the intended theoretical
    value of 1.44.

  * IXGBE_BT2KB added 1023 to account for rounding however this
    really should be 8 * 1023 - 1 to account for division by 8k.

  * x2 multiplication of max frame in DV calculations to account
    for updated hardware recommendations.

With this patch the DV values are inline with the recommendations
in the 82599 and 82598 data sheets. Its worth noting I did not
see any dropped frames with flow control on in my experiments without
this patch. However aligning with the hardware specs and
recommendations seems like a good idea here to account for worst
case scenarios.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-14 03:12:17 -07:00