Commit graph

336,024 commits

Author SHA1 Message Date
Clemens Ladisch
7baab9acfb firewire: ohci: sanity-check MMIO resource
pci_request_region() does not fail on resources that have not been
allocated by the BIOS or by the kernel, so to avoid accessing
registers that are not there, we have to check for this explicitly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-06-05 00:57:37 +02:00
Linus Torvalds
99becf1328 Pull 'for-linus' branches of git://git.kernel.org/pub/scm/linux/kernel/git/viro/{signal,vfs}
Pull signal and vfs compile breakage fixes from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  fixups for signal breakage

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nommu: fix compilation of nommu.c
2012-06-04 15:09:08 -07:00
Linus Torvalds
bf2785a818 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French.

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Move get_next_mid to ops struct
  CIFS: Make accessing is_valid_oplock/dump_detail ops struct field safe
  CIFS: Improve identation in cifs_unlock_range
  CIFS: Fix possible wrong memory allocation
2012-06-04 15:00:58 -07:00
Al Viro
03240b279d fixups for signal breakage
Obvious brainos spotted by Geert.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-04 17:47:34 -04:00
Greg Ungerer
ad1ed2937e nommu: fix compilation of nommu.c
Compiling 3.5-rc1 for nommu targets gives:

  CC      mm/nommu.o
mm/nommu.c: In function ‘sys_mmap_pgoff’:
mm/nommu.c:1489:2: error: ‘ret’ undeclared (first use in this function)
mm/nommu.c:1489:2: note: each undeclared identifier is reported only once for each function it appears in

It is trivially fixed by replacing 'ret' with the local variable that is
already defined for the return value 'retval'.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-04 17:17:31 -04:00
John Stultz
fad0c66c4b timekeeping: Fix CLOCK_MONOTONIC inconsistency during leapsecond
Commit 6b43ae8a61 (ntp: Fix leap-second hrtimer livelock) broke the
leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to
wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC.

Adjust wall_to_monotonic when NTP inserted a leapsecond.

Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Richard Cochran <richardcochran@gmail.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1338400497-12420-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-06-04 21:46:29 +02:00
Jesse Barnes
1523c310b3 drm/i915: add min freq control to debugfs
This makes for easier benchmarking and testing.  One can set a fixed
frequency by setting min and max to the same value.

v2: fix whitespace & comment (Eugeni)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eugeni Dodonov <eugeni@dodonov.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-04 21:34:47 +02:00
Samuel Ortiz
51ad304cc8 NFC: Monitor pn533 target mode
When receiving a DEP link down event, we should cancel all pending URBs
if we're activated as a target or if we're an initiator.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:34 +02:00
Samuel Ortiz
0201ed0349 NFC: Convert pn533 from semaphore to mutex
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:34 +02:00
Samuel Ortiz
41a8ec496d NFC: Set the proper baud rate when trying to activate pn533 targets
We get the right baud rate from the last polled modulation.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:33 +02:00
Samuel Ortiz
07922bb1e0 NFC: Destroy LLCP timout workqueue when releasing the link
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:33 +02:00
Samuel Ortiz
5e50ee3ae6 NFC: Switch to Initiator mode when getting NFC_ATTR_PROTOCOLS
That is needed for keeping backward compatibility with apps using the old
netlink polling API (NFC_ATTR_PROTOCOLS instead of NFC_ATTR_IM_PROTOCOLS).

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:33 +02:00
Samuel Ortiz
56af2568c2 NFC: Send a receiver ready frame only to reply to an I frame
Sending an RR as a reply to another RR is fine but not quite logical.
We should send RRs only as a reply to I frames.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:33 +02:00
Samuel Ortiz
8445796038 NFC: Requeue lost LLCP frames
When receiving an I or RR frame telling us that some of the pending queues
were not received, we should requeue them before the currently pending ones.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:33 +02:00
Samuel Ortiz
6fbbdc16be NFC: Implement pn533 polling loop
After going through all the modulations, the pn533 driver spends 2
seconds listening for targets.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:33 +02:00
Samuel Ortiz
51d9e803b9 NFC: Add type A and type F parameters for pn533 target mode
Without those settings several devices will not activate pn533 as a target.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:32 +02:00
Samuel Ortiz
d7f3345d3a NFC: Add passive initiator data for pn533
When trying to enable a DEP link as a passive initiator, pn533 needs to
provide the polling request command payload.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:32 +02:00
Samuel Ortiz
34a85bfcfb NFC: Configure pn533 RF timings
Those define the ATR_RES response timeout after which the pn533 considers the
target to be mute.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:32 +02:00
Samuel Ortiz
9f2f8ba172 NFC: Unregister device if pn533 initial configuration fails
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:32 +02:00
Samuel Ortiz
7c2a04a933 NFC: Reset poll mod list when stopping pn533 poll
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:31 +02:00
Samuel Ortiz
cb3a4503f4 NFC: Call the DEP link down ops even when in target mode
Even in target mode we need to let the driver know that we want to
bring the DEP link down.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:31 +02:00
Samuel Ortiz
5a0f6f3b46 NFC: Don't hold a NULL connecting LLCP socket lock
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:31 +02:00
Samuel Ortiz
dadb06f270 NFC: Implement the pn533 target mode Tx op
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:31 +02:00
Samuel Ortiz
103b34cf5f NFC: Implement the pn533 target mode data fetching routine
This one needs to be called as soon as we are activated as a target, for
the pn533 to receive the first SYMM and keep the LLCP link alive.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:31 +02:00
Samuel Ortiz
73167ced31 NFC: Introduce target mode rx data callback
This routine will be called by drivers whenever they receive data in target
mode. This should be unexpected events and as such should be handled by a
standalone API (i.e. not as a callback pointer from an existing API).

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:31 +02:00
Samuel Ortiz
be9ae4ce4e NFC: Introduce target mode tx ops
And rename the initiator mode data exchange ops for consistency sake.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:30 +02:00
Samuel Ortiz
f212ad5e99 NFC: Set the NFC device RF mode appropriately
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:30 +02:00
Samuel Ortiz
fc40a8c1a0 NFC: Add target mode activation netlink event
Userspace gets a netlink event upon target mode activation.
The LLCP layer is also signaled when we get an ATR_REQ in order to get
the remote general bytes.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:30 +02:00
Samuel Ortiz
ad3823cef6 NFC: Implement pn533 target mode polling loop
We only want to support p2p target mode for now, no host card emulation.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:29 +02:00
Samuel Ortiz
fe7c580073 NFC: Add target mode protocols to the polling loop startup routine
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:29 +02:00
Samuel Ortiz
ab73b75130 NFC: Export LLCP general bytes getter
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:29 +02:00
Samuel Ortiz
76762b7369 NFC: LLCP's MIUX is 10 bytes long, not 7
The mask is 0x7ff and not 0x7f and the return value is an u16.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:29 +02:00
Samuel Ortiz
93d7e490b7 NFC: Move LLCP MIU extension value to socket structure
The MIU extension value can be received during the PAX or during the
connection establishment process. It's definitely a connection related value
rather than a link one.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:29 +02:00
Samuel Ortiz
7a06e586b9 NFC: Move LLCP receiver window value to socket structure
RW can only be fetched from a CONNECT or a CC frame thus making it an
end points specific value, not a link one.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:28 +02:00
Samuel Ortiz
a69f32af86 NFC: Socket linked list
Simplify the LLCP sockets structure by putting all the connected ones
into a single linked list.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:28 +02:00
Samuel Ortiz
c7aa12252f NFC: Take a reference on the LLCP local pointer when creating a socket
LLCP sockets point to their local LLCP service, so they need to take a
reference on it.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04 21:34:28 +02:00
Daniel Vetter
cb1793ce92 drm/i915: don't chnage the original mode in dp_mode_fixup
We should only frob adjusted_mode. This is in preparation of
a massive patch by Laurent Pinchart to make the mode argument
const.

After the previous two prep patches the only thing left is to clean up
things a bit. I've opted to pass in an adjust_mode param to
dp_adjust_dithering because that way we can be sure to avoid
duplicating this logic between mode_valid and mode_fixup - which was
the cause behind a dp link bw calculation bug in the past.

Also mark the mode argument of pch_panel_fitting const.

v2: Split up the mode->clock => adjusted_mode->clock change,
as suggested by Chris Wilson.

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-04 21:29:47 +02:00
Linus Torvalds
a3fe778c78 Frontswap provides a "transcendent memory" interface for swap pages.
In some environments, dramatic performance savings may be obtained because
 swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk.
 This tag provides the basic infrastructure along with some changes to the
 existing backends.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJPsorBAAoJEFjIrFwIi8fJcz8H/RBXCtFo0kiJmRked3nMAIDO
 /2zN/q/Qawsg9aeoGlP7G8hQi9PMipbhQj3ixHyCTMv0zMbH988GXbBce+gIcg6e
 TOQi7xXAuPEwLizmSpiTv84XzN5bMgu1oJXEqIXw0EIpuZAmp+9m/o3WBwEAtyxi
 B+hvjE7eZM8f75K3lxs6sOtmIcERj9zqmT933Y8+i9iiuRyGMey2SyKtvVLbYZ+j
 HroFMUi0so5TzxT/cpkRiHu0U75c651o+LV00zh7InMqbwyRsWlKTf53k8Q/q2WP
 I7dVmfItwN/TpOrYTfxglYFlbYuUP35ziFvZ2trd6hcs9RK8OuKw+OmBLReHTtc=
 =x9Vp
 -----END PGP SIGNATURE-----

Merge tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm

Pull frontswap feature from Konrad Rzeszutek Wilk:
 "Frontswap provides a "transcendent memory" interface for swap pages.
  In some environments, dramatic performance savings may be obtained
  because swapped pages are saved in RAM (or a RAM-like device) instead
  of a swap disk.  This tag provides the basic infrastructure along with
  some changes to the existing backends."

Fix up trivial conflict in mm/Makefile due to removal of swap token code
changing a line next to the new frontswap entry.

This pull request came in before the merge window even opened, it got
delayed to after the merge window by me just wanting to make sure it had
actual users.  Apparently IBM is using this on their embedded side, and
Jan Beulich says that it's already made available for SLES and OpenSUSE
users.

Also acked by Rik van Riel, and Konrad points to other people liking it
too.  So in it goes.

By Dan Magenheimer (4) and Konrad Rzeszutek Wilk (2)
via Konrad Rzeszutek Wilk
* tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  frontswap: s/put_page/store/g s/get_page/load
  MAINTAINER: Add myself for the frontswap API
  mm: frontswap: config and doc files
  mm: frontswap: core frontswap functionality
  mm: frontswap: core swap subsystem hooks and headers
  mm: frontswap: add frontswap header file
2012-06-04 12:28:45 -07:00
Daniel Vetter
71244653a8 drm/i915: adjusted_mode->clock in the dp mode_fixup
... instead of changing mode->clock, which we should leave as-is.

After the previous patch we only touch that if it's a panel, and then
adjusted mode->clock equals adjusted_mode->clock. Outside of
intel_dp.c we only use ajusted_mode->clock in the mode_set functions.

Within intel_dp.c we only use it to calculate the dp dithering
and link bw parameters, so that's the only thing we need to fix
up.

As a temporary ugliness (until the cleanup in the next patch) we
pass the adjusted_mode into dp_dither for both parameters (because
that one still looks at mode->clock).

Note that we do overwrite adjusted_mode->clock with the selected dp
link clock, but that only happens after we've calculated everything we
need based on the dotclock of the adjusted output configuration.

Outside of intel_dp.c only intel_display.c uses adjusted_mode->clock,
and that stays the same after this patch (still equals the selected dp
link clock). intel_display.c also needs the actual dotclock (as
target_clock), but that has been fixed up in the previous patch.

v2: Adjust the debug message to also use adjusted_mode->clock.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-04 21:28:44 +02:00
Daniel Vetter
94bf2cedbc drm/i915: compute the target_clock for edp directly
... instead of abusing mode->clock by storing it in there - we
shouldn't touch that one at all. This patch is the first prep step to
constify the mode argument of the intel_dp_mode_fixup function.

The next patch will stop us from modifying mode->clock.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-04 21:27:47 +02:00
Johannes Berg
fcb6ff5e2c iwlwifi: disable WoWLAN if !CONFIG_PM_SLEEP
If CONFIG_PM_SLEEP is disabled, then iwlwifi doesn't
support suspend/resume handlers and thus mac80211
(correctly) refuses advertising WoWLAN. Disable
WoWLAN in the driver in this case.

Cc: stable@kernel.org
Reported-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:27:07 -04:00
Arik Nemtsov
794454ce72 mac80211: fix non RCU-safe sta_list manipulation
sta_info_cleanup locks the sta_list using rcu_read_lock however
the delete operation isn't rcu safe. A race between sta_info_cleanup
timer being called and a STA being removed can occur which leads
to a panic while traversing sta_list. Fix this by switching to the
RCU-safe versions.

Cc: stable@vger.kernel.org
Reported-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:26:54 -04:00
Seth Forshee
69aaedd3cf bcma: add ext PA workaround for BCM4331 and BCM43431
MacBook Pro models with BCM4331 wireless have been found to have the ext
PA lines disabled after resuming from S3 without external power attach.
This causes them to be unable to transmit. Add a workaround to ensure
that the ext PA lines are enabled on BCM4331. Also extend all handling
of ext PA line muxing to BCM43431 as is done in the Broadcom SDK.

BugLink: http://bugs.launchpad.net/bugs/925577
Cc: Arend van Spriel <arend@broadcom.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:26:40 -04:00
Stanislaw Gruszka
e5851dac2c rt2x00: use atomic variable for seqno
Remove spinlock as atomic_t can be used instead. Note we use only 16
lower bits, upper bits are changed but we impilcilty cast to u16.

This fix possible deadlock on IBSS mode reproted by lockdep:

=================================
[ INFO: inconsistent lock state ]
3.4.0-wl+ #4 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&intf->seqlock)->rlock){+.?...}, at: [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
{IN-SOFTIRQ-W} state was registered at:
  [<c04978ab>] __lock_acquire+0x47b/0x1050
  [<c0498504>] lock_acquire+0x84/0xf0
  [<c0835733>] _raw_spin_lock+0x33/0x40
  [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
  [<f9979f2a>] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib]
  [<f997834f>] rt2x00mac_tx+0x7f/0x380 [rt2x00lib]
  [<f98fe363>] __ieee80211_tx+0x1b3/0x300 [mac80211]
  [<f98ffdf5>] ieee80211_tx+0x105/0x130 [mac80211]
  [<f99000dd>] ieee80211_xmit+0xad/0x100 [mac80211]
  [<f9900519>] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211]
  [<c0782e87>] dev_hard_start_xmit+0x307/0x660
  [<c079bb71>] sch_direct_xmit+0xa1/0x1e0
  [<c0784bb3>] dev_queue_xmit+0x183/0x730
  [<c078c27a>] neigh_resolve_output+0xfa/0x1e0
  [<c07b436a>] ip_finish_output+0x24a/0x460
  [<c07b4897>] ip_output+0xb7/0x100
  [<c07b2d60>] ip_local_out+0x20/0x60
  [<c07e01ff>] igmpv3_sendpack+0x4f/0x60
  [<c07e108f>] igmp_ifc_timer_expire+0x29f/0x330
  [<c04520fc>] run_timer_softirq+0x15c/0x2f0
  [<c0449e3e>] __do_softirq+0xae/0x1e0
irq event stamp: 18380437
hardirqs last  enabled at (18380437): [<c0526027>] __slab_alloc.clone.3+0x67/0x5f0
hardirqs last disabled at (18380436): [<c0525ff3>] __slab_alloc.clone.3+0x33/0x5f0
softirqs last  enabled at (18377616): [<c0449eb3>] __do_softirq+0x123/0x1e0
softirqs last disabled at (18377611): [<c041278d>] do_softirq+0x9d/0xe0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&intf->seqlock)->rlock);
  <Interrupt>
    lock(&(&intf->seqlock)->rlock);

 *** DEADLOCK ***

4 locks held by kworker/u:2/30374:
 #0:  (wiphy_name(local->hw.wiphy)){++++.+}, at: [<c045cf99>] process_one_work+0x109/0x3f0
 #1:  ((&sdata->work)){+.+.+.}, at: [<c045cf99>] process_one_work+0x109/0x3f0
 #2:  (&ifibss->mtx){+.+.+.}, at: [<f98f005b>] ieee80211_ibss_work+0x1b/0x470 [mac80211]
 #3:  (&intf->beacon_skb_mutex){+.+...}, at: [<f997a644>] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib]

stack backtrace:
Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4
Call Trace:
 [<c04962a6>] print_usage_bug+0x1f6/0x220
 [<c0496a12>] mark_lock+0x2c2/0x300
 [<c0495ff0>] ? check_usage_forwards+0xc0/0xc0
 [<c04978ec>] __lock_acquire+0x4bc/0x1050
 [<c0527890>] ? __kmalloc_track_caller+0x1c0/0x1d0
 [<c0777fb6>] ? copy_skb_header+0x26/0x90
 [<c0498504>] lock_acquire+0x84/0xf0
 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
 [<c0835733>] _raw_spin_lock+0x33/0x40
 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
 [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
 [<f997a5cf>] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib]
 [<f997a64d>] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib]
 [<f9977e3a>] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib]
 [<f9977c70>] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib]
 [<f98e4dd0>] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211]
 [<f98ef7b8>] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211]
 [<c0496ab4>] ? mark_held_locks+0x64/0xc0
 [<c0440012>] ? virt_efi_query_capsule_caps+0x12/0x50
 [<f98efb09>] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211]
 [<f98f0456>] ieee80211_ibss_work+0x416/0x470 [mac80211]
 [<c0496d8b>] ? trace_hardirqs_on+0xb/0x10
 [<c077683b>] ? skb_dequeue+0x4b/0x70
 [<f98f207f>] ieee80211_iface_work+0x13f/0x230 [mac80211]
 [<c045cf99>] ? process_one_work+0x109/0x3f0
 [<c045d015>] process_one_work+0x185/0x3f0
 [<c045cf99>] ? process_one_work+0x109/0x3f0
 [<f98f1f40>] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211]
 [<c045ed86>] worker_thread+0x116/0x270
 [<c045ec70>] ? manage_workers+0x1e0/0x1e0
 [<c0462f64>] kthread+0x84/0x90
 [<c0462ee0>] ? __init_kthread_worker+0x60/0x60
 [<c083d382>] kernel_thread_helper+0x6/0x10

Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:26:26 -04:00
Joe Perches
f304a99319 brcmfmac: Fix likely misuse of | for &
Using | with a constant is always true.
Likely this should have be &.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:26:11 -04:00
Joe Perches
5204267d2f mac80211: Fix likely misuse of | for &
Using | with a constant is always true.
Likely this should have be &.

cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:25:56 -04:00
Felix Fietkau
d8c7aae64c mac80211: add missing rcu_read_lock/unlock in agg-rx session timer
Fixes a lockdep warning:

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
net/mac80211/agg-rx.c:148 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 1
1 lock held by arecord/11226:
 #0:  (&tid_agg_rx->session_timer){+.-...}, at: [<ffffffff81066bb0>] call_timer_fn+0x0/0x360

stack backtrace:
Pid: 11226, comm: arecord Not tainted 3.1.0-kml #16
Call Trace:
 <IRQ>  [<ffffffff81093454>] lockdep_rcu_dereference+0xa4/0xc0
 [<ffffffffa02778c9>] sta_rx_agg_session_timer_expired+0xc9/0x110 [mac80211]
 [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211]
 [<ffffffff81066c3a>] call_timer_fn+0x8a/0x360
 [<ffffffff81066bb0>] ? init_timer_deferrable_key+0x30/0x30
 [<ffffffff81477bb0>] ? _raw_spin_unlock_irq+0x30/0x70
 [<ffffffff81067049>] run_timer_softirq+0x139/0x310
 [<ffffffff81091d5e>] ? put_lock_stats.isra.25+0xe/0x40
 [<ffffffff810922ac>] ? lock_release_holdtime.part.26+0xdc/0x160
 [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211]
 [<ffffffff8105cb78>] __do_softirq+0xc8/0x3c0
 [<ffffffff8108f088>] ? tick_dev_program_event+0x48/0x110
 [<ffffffff8108f16f>] ? tick_program_event+0x1f/0x30
 [<ffffffff81153b15>] ? putname+0x35/0x50
 [<ffffffff8147a43c>] call_softirq+0x1c/0x30
 [<ffffffff81004c55>] do_softirq+0xa5/0xe0
 [<ffffffff8105d1ee>] irq_exit+0xae/0xe0
 [<ffffffff8147ac6b>] smp_apic_timer_interrupt+0x6b/0x98
 [<ffffffff81479ab3>] apic_timer_interrupt+0x73/0x80
 <EOI>  [<ffffffff8146aac6>] ? free_debug_processing+0x1a1/0x1d5
 [<ffffffff81153b15>] ? putname+0x35/0x50
 [<ffffffff8146ab2b>] __slab_free+0x31/0x2ca
 [<ffffffff81477c3a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90
 [<ffffffff81253b8f>] ? __debug_check_no_obj_freed+0x15f/0x210
 [<ffffffff81097054>] ? lock_release_nested+0x84/0xc0
 [<ffffffff8113ec55>] ? kmem_cache_free+0x105/0x250
 [<ffffffff81153b15>] ? putname+0x35/0x50
 [<ffffffff81153b15>] ? putname+0x35/0x50
 [<ffffffff8113ed8f>] kmem_cache_free+0x23f/0x250
 [<ffffffff81153b15>] putname+0x35/0x50
 [<ffffffff81146d8d>] do_sys_open+0x16d/0x1d0
 [<ffffffff81146e10>] sys_open+0x20/0x30
 [<ffffffff81478f42>] system_call_fastpath+0x16/0x1b

Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:25:41 -04:00
Johannes Berg
71ecfa1893 mac80211: clean up remain-on-channel on interface stop
When any interface goes down, it could be the one that we
were doing a remain-on-channel with. We therefore need to
cancel the remain-on-channel and flush the related work
structs so they don't run after the interface has been
removed or even destroyed.

It's also possible in this case that an off-channel SKB
was never transmitted, so free it if this is the case.
Note that this can also happen if the driver finishes
the off-channel period without ever starting it.

Cc: stable@kernel.org
Reported-by: Nirav Shah <nirav.j2.shah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:25:26 -04:00
Johannes Berg
1ae2fc25a1 mac80211_hwsim: advertise interface combinations
Enforcing interface combinations broke uses of hwsim
with multiple virtual interfaces. Advertise that all
combinations are possible to fix this.

Reported-by: Nirav Shah <nirav.j2.shah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:25:10 -04:00
Meenakshi Venkataraman
bd34ab62a3 mac80211: fix error in station state transitions during reconfig
As part of hardware reconfig mac80211 tries
to restore the station state to its values
before the hardware reconfig, but it only
goes to the last-state - 1. Fix this
off-by-one error.

Cc: stable@kernel.org [3.4]
Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04 15:24:56 -04:00