Commit graph

336,024 commits

Author SHA1 Message Date
Toshi Kani
51af3b9202 ACPI: Add _OST support for ACPI CPU hotplug
Changed acpi_processor_hotplug_notify() to call ACPI _OST method
when ACPI CPU hotplug operation has completed.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 01:09:20 -04:00
Toshi Kani
c4753e57b7 ACPI: Add _OST support for sysfs eject
Changed acpi_bus_hot_remove_device() to support _OST. This function is
also changed to global so that it can be called from hotplug notify
handlers to perform hot-remove operation.

Changed acpi_eject_store(), which is the sysfs eject handler. It checks
eject_pending to see if the request was originated from ACPI eject
notification. If not, it calls _OST(0x103,84,) per Figure 6-37 in ACPI
5.0 spec.

Added eject_pending bit to acpi_device_flags. This bit is set when the
kernel has received an ACPI eject notification, but does not initiate
its hot-remove operation by itself.

Added struct acpi_eject_event. This structure is used to pass extended
information to acpi_bus_hot_remove_device(), which has a single argument
to support asynchronous call

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 01:09:19 -04:00
Toshi Kani
275c58d770 ACPI: Add an interface to evaluate _OST
Added acpi_evaluate_hotplug_opt(). All ACPI hotplug handlers must call
this function when evaluating _OST for hotplug operations. If the
platform does not support _OST, this function returns AE_NOT_FOUND and
has no effect on the platform.

ACPI_HOTPLUG_OST is defined when all relevant ACPI hotplug operations,
such as CPU, memory and container hotplug, are enabled. This assures
consistent behavior among the hotplug operations with regarding the
_OST support. When ACPI_HOTPLUG_OST is not defined, this function is
a no-op.

ACPI PCI hotplug is not enhanced to support _OST at this time since it
is a legacy method being replaced by PCIe native hotplug. _OST support
for ACPI PCI hotplug may be added in future if necessary.

Some platforms may require the OS to support _OST in order to support
ACPI hotplug operations. For example, if a platform has the management
console where user can request a hotplug operation from, this _OST
support would be required for the management console to show the result
of the hotplug request to user.

Added macro definitions of _OST source events and status codes.
Also renamed OSC_SB_CPUHP_OST_SUPPORT to OSC_SB_HOTPLUG_OST_SUPPORT
since this _OSC bit is not specific to CPU hotplug. This bit is
defined in Table 6-147 of ACPI 5.0 as follows.

  Bits:       3
  Field Name: Insertion / Ejection _OST Processing Support
  Definition: This bit is set if OSPM will evaluate the _OST
              object defined under a device when processing
              insertion and ejection source event codes.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 01:09:14 -04:00
Rafal Prylowski
762be29733 ep93xx: Add IDE support to edb93xx boards
Add IDE support to edb93xx boards.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-06-04 14:52:17 +10:00
Len Brown
d3514abcf5 Merge branches 'bugfix-battery', 'bugfix-misc', 'bugfix-rafael', 'bugfix-turbostat', 'bugfix-video' and 'workaround-pss' into release
bug fixes

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 00:48:41 -04:00
Rafal Prylowski
eb774a0901 ep93xx: IDE driver platform support code
Add IDE driver platform support code for ep93xx.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-06-04 14:40:46 +10:00
Len Brown
7e1bd6e38b Merge branch 'upstream' into bugfix-video
Update bugfix-video branch to 2.5-rc1
so I don't have to again resolve the
conflict in these patches vs. upstream.

Conflicts:
	drivers/gpu/drm/gma500/psb_drv.c

	text conflict: add comment vs delete neighboring line

	keep just this:
	/* igd_opregion_init(&dev_priv->opregion_dev); */
	/* acpi_video_register(); */

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 00:35:19 -04:00
Len Brown
7ae30986dc ACPI: fix acpi_bus.h build warnings when ACPI is not enabled
introduced in Linux-3.5-rc1 by
66886d6f8c
(ACPI: Add stubs for (un)register_acpi_bus_type)

Fix header file warnings when CONFIG_ACPI is not enabled:

include/acpi/acpi_bus.h:443:42: warning: 'struct acpi_bus_type' declared inside parameter list
include/acpi/acpi_bus.h:443:42: warning: its scope is only this definition or declaration, which is probably not
include/acpi/acpi_bus.h:444:44: warning: 'struct acpi_bus_type' declared inside parameter list

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 00:29:11 -04:00
Kukjin Kim
5041caa4d5 gpio/samsung: fix the typo 'exynos5_xxx' instead of 'exonys5_xxx'
Should be 'exynos5_xxx' instead of 'exonys5_xxx'.

It happened at the commit 30b842889e ("Merge tag 'soc2' of
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc")
during v3.5 merge window.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ My bad  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-03 21:21:01 -07:00
Fabio Estevam
2f07a6134f drivers: acpi: Fix dependency for ACPI_HOTPLUG_CPU
Fix the following build warning:

warning: (ACPI_HOTPLUG_CPU) selects ACPI_CONTAINER which has unmet direct dependencies (ACPI && EXPERIMENTAL)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04 00:07:33 -04:00
Len Brown
650a37f32d tools/power turbostat: fix IVB support
Initial IVB support went into turbostat in Linux-3.1:
553575f1ae
(tools turbostat: recognize and run properly on IVB)

However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.

In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".

Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.

This patch is a backport of a fix already included in turbostat v2.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-03 23:47:49 -04:00
Len Brown
d15cf7c129 tools/power turbostat: fix un-intended affinity of forked program
Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:

15aaa34654
(tools turbostat: reduce measurement overhead due to IPIs)

In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.

This change removed the binding before forking the child.

This is a back-port of a fix already included in turbostat v2.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-03 23:24:00 -04:00
Linus Torvalds
4d578573b8 Merge branch 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull some left-over PM patches from Rafael J. Wysocki.

* 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification
  ACPI / PM: Make __acpi_bus_get_power() cover D3cold correctly
  ACPI / PM: Fix error messages in drivers/acpi/bus.c
  rtc-cmos / PM: report wakeup event on ACPI RTC alarm
  ACPI / PM: Generate wakeup events on fixed power button
2012-06-03 20:15:57 -07:00
Linus Torvalds
68e3e92620 Revert "mm: compaction: handle incorrect MIGRATE_UNMOVABLE type pageblocks"
This reverts commit 5ceb9ce6fe.

That commit seems to be the cause of the mm compation list corruption
issues that Dave Jones reported.  The locking (or rather, absense
there-of) is dubious, as is the use of the 'page' variable once it has
been found to be outside the pageblock range.

So revert it for now, we can re-visit this for 3.6.  If we even need to:
as Minchan Kim says, "The patch wasn't a bug fix and even test workload
was very theoretical".

Reported-and-tested-by: Dave Jones <davej@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-03 20:05:57 -07:00
Hugh Dickins
752dc185da mm: fix warning in __set_page_dirty_nobuffers
New tmpfs use of !PageUptodate pages for fallocate() is triggering the
WARNING: at mm/page-writeback.c:1990 when __set_page_dirty_nobuffers()
is called from migrate_page_copy() for compaction.

It is anomalous that migration should use __set_page_dirty_nobuffers()
on an address_space that does not participate in dirty and writeback
accounting; and this has also been observed to insert surprising dirty
tags into a tmpfs radix_tree, despite tmpfs not using tags at all.

We should probably give migrate_page_copy() a better way to preserve the
tag and migrate accounting info, when mapping_cap_account_dirty().  But
that needs some more work: so in the interim, avoid the warning by using
a simple SetPageDirty on PageSwapBacked pages.

Reported-and-tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-03 20:05:47 -07:00
Vincent Sanders
bcccc50ce8 ARM: 7420/1: Improve build environment isolation
Increasingly distributions are setting default build environments to
have LDFLAGS with hardening options. There seems to be an assumption
with those options that LDFLAGS are passed to the compiler frontend
rather than used directly with ld (which the kernel build process
assumes)

To prevent build failures in such environments this patch changes the
ARM architecture Makefile to override the LDFLAGS from the environment
similar to the behaviour on other common architectures e.g. x86

Signed-off-by: Vincent Sanders <vince@collabora.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-03 23:05:44 +01:00
Linus Torvalds
2f9d3df8aa vfs: move inode stat information closer together
The comment above it says "Stat data, not accessed from path walking",
but in fact some of inode fields we use for the common stat data was way
down at the end of the inode, causing unnecessary cache misses for the
common stat operations.

The inode structure is pretty big, and this can change padding depending
on field width, but at least on the common 64-bit configurations this
doesn't change the size.  Some of our inode layout has historically been
to tro to avoid unnecessary padding fields, but cache locality is at
least as important for layout, if not more.

Noticed by looking at kernel profiles, and noticing that the "i_blkbits"
access stood out like a sore thumb.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-03 14:50:19 -07:00
Felipe Balbi
dd8e93814a usb: gadget: omap_udc: use generic map/unmap routines
This patch makes use of the generic map/unmap
routines on the omap_udc driver. Removes
some useless and duplicated code.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:35 +03:00
Felipe Balbi
23673d7d26 usb: gadget: omap_udc: kfree(NULL) is safe
we don't need to check for _req because
kfree(NULL) is safe. Also, if someone
actually passes a NULL pointer to be freed
by usb_ep_free_request(), he deserves any
issue he faces.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:34 +03:00
Felipe Balbi
70617db7ad usb: gadget: omap_udc: remove possiblity of NULL pointer de-reference
when allocating a request, it's better programming
practice to make sure we return NULL if allocation
failed.

This will ensure that, if struct usb_request isn't
the first member on our structure, we don't cheat
the gadget driver into thinking allocating worked
because pointer isn't 0.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:33 +03:00
Felipe Balbi
dc1737cdd7 usb: gadget: omap_udc: let it work as a module
this also helps removing a few lines of boilerplate
code.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:32 +03:00
Felipe Balbi
5b6d84b789 usb: gadget: omap_udc: remove useless print
that print isn't needed at all. Remove it
and move the use_dma reinitialization to
probe() function.

Note that ideally we would drop all
cpu_is_* and machine_is_* checks from
this driver instead. Later patches will
come to get rid of those.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:30 +03:00
Felipe Balbi
80dd1358d3 usb: gadget: omap_udc: make checkpatch.pl happy
This patch is just a cleanup patch to make
checkpatch.pl a little happier with the
omap_udc.c driver.

No functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:29 +03:00
Tony Lindgren
ae3725716e usb: gadget: omap_udc: Remove omap2 support
There are no active users of this code for omap2 as
the boards in use have either TUSB or MUSB controller.

While at it, also fix warnings related to uninitialized
dc_clk and hhc_clk.

Cc: linux-usb@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:11:27 +03:00
Felipe Balbi
85a781019b usb: dwc3: ep0: rename dwc3_ep0_complete_req to dwc3_ep0_complete_status
That's a much more intuitive name as that function
is only called at the completion of a Status Phase.

It also matches dwc3_ep0_complete_data() for
the completion of Data Phase.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:28 +03:00
Felipe Balbi
c8cf7af452 usb: dwc3: ep0: be careful with endianness on SetSEL command
USB is always little endian, but this driver
could run on non little endian cpus. Let's
be carefull with that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:27 +03:00
Felipe Balbi
ef21ede65e usb: dwc3: ep0: simplify error handling on dwc3_ep0_inspect_setup
There's no need for returning early. Instead,
we can call dwc3_ep0_stall_and_restart()
conditionally.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:27 +03:00
Gerard CAUVY
5cbe8c220c usb: dwc3: gadget: move AcceptU1Ena and AcceptU2Ena to Reset IRQ
According to the databook, the DWC3 Core will
reset those bits to 0 on USB Bus Reset. This
means we must re-enable those bits on every
reset interrupt.

Because we will always get a Reset interrupt
after loading a gadget driver, we can, instead
of re-enabling something that was just lost,
move the handling of those bits to the Reset
Interrupt.

This patch fixes USB30CV U1/U2 Test.

Signed-off-by: Gerard CAUVY <g-cauvy1@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:26 +03:00
Felipe Balbi
c4430a2694 usb: dwc3: gadget: disable U1/U2 on disconnect
If we get a disconnect IRQ, we should take
the core out of low power mode so we can
reconnect afterwards.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:25 +03:00
Felipe Balbi
fcc023c726 usb: dwc3: gadget: prevent DCTL register corruption
If we don't read out the contents of the register
(in order to reinitialize 'reg' variable) we will
be writing unknown contents to the DCTL register
whenever we try to use dwc3_gadget_wakeup() function.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:25 +03:00
Paul Zimmerman
7acd85e0eb usb: dwc3: core: make sure evt->lpos is correctly initialized
The same event buffers will be reused when coming
out of hibernation, so we must reinitialize them
properly to avoid any mistakes.

While at that, also take dwc3_event_buffers_setup()
out of __devinit section.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:24 +03:00
Paul Zimmerman
802fde983e usb: dwc3: support new revisions of DWC3 core
Recent cores (>= 1.94a) have a set of new features,
commands and a slightly different programming model.

This patch aims to support those changes.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:23 +03:00
Paul Zimmerman
d7a46a8dfc usb: dwc3: gadget: rename phy_power() to phy_suspend()
those two functions don't power PHYs, they simply
put them in suspend state. Rename to reflect better
what functions actually do.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:23 +03:00
Paul Zimmerman
aed430e513 usb: dwc3: gadget: reinitialize retries
retries is used twice without being reinitialized.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:22 +03:00
Paul Zimmerman
2c61a8efce usb: dwc3: add definitions for new registers
This patch adds definitions for some new registers that have been
added to later versions of the controller, up to v2.10a.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:21 +03:00
Felipe Balbi
a092532483 usb: dwc3: gadget: remove trailing semicolon
That semicolon doesn't do anything, it's not
needed and should be removed.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:21 +03:00
Felipe Balbi
33b84c2c06 usb: dwc3: ep0: fix a typo in comment
s/has/have. No functional changes, just
a typo fix on a code comment.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:20 +03:00
Felipe Balbi
788a23f496 usb: dwc3: ep0: align on function signature
On our Transfer Not Ready handlers, only
dwc3_ep0_do_control_status() had a different
list of parameters.

Align on the parameters in order to keep consistency.

No functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:19 +03:00
Felipe Balbi
c74c6d4a02 usb: dwc3: ep0: switch over to IS_ALIGNED
IS_ALIGNED provides a much faster operation for
checking proper size alignment then a modulo
operation. Let's use it.

Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:19 +03:00
Felipe Balbi
a0807881af usb: dwc3: handle pending unaligned Control OUT data phase correctly
When DWC3_EP_PENDING_REQUEST flag is set for a Control OUT Data
phase transfer, we would be missing the proper handling for
unaligned OUT requests, thus hanging a transfer.

Since proper handling is already done on dwc3_ep0_do_control_data(),
we simply re-factor that function so it can be re-used from
__dwc3_gadget_ep0_queue().

Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:18 +03:00
Felipe Balbi
4552a0ca61 usb: dwc3: fix a WARN and a comment
we're now have DWC3_EP0_BOUNCE_SIZE to tell
us the actual size of the bufer. Let's use that
instead of ep0 wMaxPacketSize.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:17 +03:00
Axel Lin
2e3f7f26e1 regulator: max77686: Use regulator_map_voltage_linear for simple linear mappings
Both max77686_ops and max77686_buck_dvs_ops use simple linear voltage maps.
Thus use regulator_map_voltage_linear is more efficient than using the defult
regulator_map_voltage_iterate.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03 20:11:09 +01:00
Axel Lin
fcbb71f6f8 regulator: wm8350: Use regulator_map_voltage_linear for wm8350_dcdc_ops
wm8350_dcdc_ops uses simple linear voltage maps.
Thus use regulator_map_voltage_linear is more efficient than using the default
regulator_map_voltage_iterate.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03 20:08:54 +01:00
Joe Perches
dc605dbdb8 can: cc770: Fix likely misuse of | for &
Using | with a constant is always true.
Likely this should have be &.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03 18:59:21 +02:00
AnilKumar Ch
f461f27a44 can: c_can: fix race condition in c_can_open()
Fix the issue of C_CAN interrupts getting disabled forever when canconfig
utility is used multiple times. According to NAPI usage we disable all
the hardware interrupts in ISR and re-enable them in poll(). Current
implementation calls napi_enable() after hardware interrupts are enabled.
If we get any interrupts between these two steps then we do not process
those interrupts because napi is not enabled. Mostly these interrupts
come because of STATUS is not 0x7 or ERROR interrupts. If napi_enable()
happens before HW interrupts enabled then c_can_poll() function will be
called eventual re-enabling.

This patch moves the napi_enable() call before interrupts enabled.

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03 18:59:20 +02:00
AnilKumar Ch
148c87c89e can: c_can: fix an interrupt thrash issue with c_can driver
This patch fixes an interrupt thrash issue with c_can driver.

In c_can_isr() function interrupts are disabled and enabled only in
c_can_poll() function. c_can_isr() & c_can_poll() both read the
irqstatus flag. However, irqstatus is always read as 0 in c_can_poll()
because all C_CAN interrupts are disabled in c_can_isr(). This causes
all interrupts to be re-enabled in c_can_poll() which in turn causes
another interrupt since the event is not really handled. This keeps
happening causing a flood of interrupts.

To fix this, read the irqstatus register in isr and use the same cached
value in the poll function.

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03 18:59:19 +02:00
AnilKumar Ch
617caccebe can: c_can: fix "BUG! echo_skb is occupied!" during transmit
This patch fixes an issue with transmit routine, which causes
"can_put_echo_skb: BUG! echo_skb is occupied!" message when
using "cansequence -p" on D_CAN controller.

In c_can driver, while transmitting packets tx_echo flag holds
the no of can frames put for transmission into the hardware.

As the comment above c_can_do_tx() indicates, if we find any packet
which is not transmitted then we should stop looking for more.
In the current implementation this is not taken care of causing the
said message.

Also, fix the condition used to find if the packet is transmitted
or not. Current code skips the first tx message object and ends up
checking one extra invalid object.

While at it, fix the comment on top of c_can_do_tx() to use the
terminology "packet" instead of "package" since it is more
standard.

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03 18:59:18 +02:00
Guenter Roeck
ca4620853a MAINTAINERS: Update my e-mail address
Maintainer activities moved to home server. Update e-mail address to reflect
reality.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-06-03 08:13:41 -07:00
Marc Dionne
d8dc3494f7 HID: logitech: don't use stack based dj_report structures
On a system with a logitech wireless keyboard/mouse and DMA-API debugging
enabled, this warning appears at boot:

kernel: WARNING: at lib/dma-debug.c:929 check_for_stack.part.12+0x70/0xa7()
kernel: Hardware name: MS-7593
kernel: uhci_hcd 0000:00:1d.1: DMA-API: device driver maps memory fromstack [addr=ffff8801b0079c29]

Make logi_dj_recv_query_paired_devices and logi_dj_recv_switch_to_dj_mode
use a structure allocated with kzalloc rather than a stack based one.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-03 15:11:43 +02:00
Mark Brown
f59fef4417 ASoC: wm8350: Convert to direct regmap API usage
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03 13:33:53 +01:00