Commit graph

336,024 commits

Author SHA1 Message Date
Will Deacon
46ce341b2f pipe: return -ENOIOCTLCMD instead of -EINVAL on unknown ioctl command
As described in commit 07d106d0a ("vfs: fix up ENOIOCTLCMD error
handling"), drivers should return -ENOIOCTLCMD if they receive an ioctl
command which they don't understand. Doing so will result in -ENOTTY
being returned to userspace, which matches the behaviour of the compat
layer if it fails to translate an ioctl command.

This patch fixes the pipe ioctl to return -ENOIOCTLCMD instead of
-EINVAL when passed an unknown ioctl command.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:55 -04:00
J. Bruce Fields
3f50fff4da vfs: remove unused __d_splice_alias argument
Nobody sets want_disconn any more.

Reported-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:54 -04:00
J. Bruce Fields
7732a557b1 vfs: stop d_splice_alias creating directory aliases
A directory should never have more than one dentry pointing to it.

But d_splice_alias() will add one if it finds a directory with an
already-existing non-DISCONNECTED dentry.

I can't find an obvious reproducer, but I also can't see what prevents
d_splice_alias() from encountering such a case.

It therefore seems safest to allow d_splice_alias to use any dentry it
finds.

(Prior to the removal of dentry_unhash() from vfs_rmdir(), around v3.0,
this could cause an nfsd deadlock like this:

	- Somebody attempts to remove a non-empty directory.
	- The dentry_unhash() in vfs_rmdir() unhashes the dentry
	  pointing to the non-empty directory.
	- ->rmdir() then fails with -ENOTEMPTY
	- Before the vfs_rmdir() caller reaches dput(), an nfsd process
	  in rename looks up the directory by filehandle; at the end of
	  that lookup, this dentry is found by d_alloc_anon(), and a
	  reference is taken on it, preventing dput() from removing it.
	- A regular lookup of the directory calls d_splice_alias(),
	  finds only an unhashed (not a DISCONNECTED) dentry, and
	  insteads adds a new one, so the directory now has two
	  dentries.
	- The nfsd process in rename, which was previously looking up
	  the source directory of the rename, now looks up the target
	  directory (which is the same), and gets the dentry newly
	  created by the previous lookup.
	- The rename, seeing two different dentries, assumes this is a
	  cross-directory rename and attempts to take the i_mutex on the
	  directory twice.

That reproducer no longer exists, but I don't think there was anything
fundamentally incorrect about the vfs_rmdir() behavior there, so I think
the real fault was here in d_splice_alias().)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:54 -04:00
Al Viro
244ca2b4d0 i810: switch to vm_mmap()
Weirdness around do_mmap() in there does not rely on ->mmap_sem for
exclusion, so no need to keep it under that.  As the result, we can
turn that do_mmap() into vm_mmap().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:54 -04:00
Dan Carpenter
fd657170c0 fsnotify: remove unused parameter from send_to_group()
We don't use "mnt" anymore in send_to_group() after 1968f5eed5 ("fanotify:
use both marks when possible") was applied.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:53 -04:00
Naohiro Aota
a4f9a9a635 fsnotify: handle subfiles' perm events
Recently I'm working on fanotify and found the following strange
behaviors.

I wrote a program to set fanotify_mark on "/tmp/block" and FAN_DENY
all events notified.

fanotify_mask = FAN_ALL_EVENTS | FAN_ALL_PERM_EVENTS | FAN_EVENT_ON_CHILD:
$ cd /tmp/block; cat foo
cat: foo: Operation not permitted

Operation on the file is blocked as expected.

But,

fanotify_mask = FAN_ALL_PERM_EVENTS | FAN_EVENT_ON_CHILD:
$ cd /tmp/block; cat foo
aaa

It's not blocked anymore.  This is confusing behavior.  Also reading
commit "fsnotify: call fsnotify_parent in perm events", it seems like
fsnotify should handle subfiles' perm events as well as the other notify
events.

With this patch, regardless of FAN_ALL_EVENTS set or not:
$ cd /tmp/block; cat foo
cat: foo: Operation not permitted

Operation on the file is now blocked properly.

FS_OPEN_PERM and FS_ACCESS_PERM are not listed on FS_EVENTS_POSS_ON_CHILD.
 Due to fsnotify_inode_watches_children() check, if you only specify only
these events as fsnotify_mask, you don't get subfiles' perm events
notified.

This patch add the events to FS_EVENTS_POSS_ON_CHILD to get them notified
even if only these events are specified to fsnotify_mask.

Signed-off-by: Naohiro Aota <naota@elisp.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:53 -04:00
Dmitry Kasatkin
799243a389 vfs: increment iversion when a file is truncated
When a file is truncated with truncate()/ftruncate() and then closed,
iversion is not updated.  This patch uses ATTR_SIZE flag as an indication
to increment iversion.

Mimi said:

On fput(), i_version is used to detect and flag files that have changed
and need to be re-measured in the IMA measurement policy.  When a file
is truncated with truncate()/ftruncate() and then closed, i_version is
not updated.  As a result, although the file has changed, it will not be
re-measured and added to the IMA measurement list on subsequent access.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:53 -04:00
Shai Fultheim
a0a9b04337 fs: Move bh_cachep to the __read_mostly section
bh_cachep is only written to once on initialization, so move it to the
__read_mostly section.

Signed-off-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Vlad Zolotarov <vlad@scalemp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:52 -04:00
Cong Wang
3ed37648e1 fs: move file_remove_suid() to fs/inode.c
file_remove_suid() is a generic function operates on struct file,
it almost has no relations with file mapping, so move it to fs/inode.c.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:52 -04:00
Artem Bityutskiy
8bdc81c506 jffs2: get rid of jffs2_sync_super
Currently JFFS2 file-system maps the VFS "superblock" abstraction to the
write-buffer. Namely, it uses VFS services to synchronize the write-buffer
periodically.

The whole "superblock write-out" VFS infrastructure is served by the
'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and
writes out all dirty superblock using the '->write_super()' call-back. But the
problem with this thread is that it wastes power by waking up the system every
5 seconds no matter what. So we want to kill it completely and thus, we need to
make file-systems to stop using the '->write_super' VFS service, and then
remove it together with the kernel thread.

This patch switches the JFFS2 write-buffer management from
'->write_super()'/'->s_dirt' to a delayed work. Instead of setting the 's_dirt'
flag we just schedule a delayed work for synchronizing the write-buffer.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:52 -04:00
Artem Bityutskiy
06688905cc jffs2: remove unnecessary GC pass on sync
We do not need to call 'jffs2_write_super()' on sync. This function
causes a GC pass to make sure the current contents is pushed out with
the data which we already have on the media.

But this is not needed on unmount and only slows sync down unnecessarily.
It is enough to just sync the write-buffer.

This call was added by one of the generic VFS rework patch-sets,
see d579ed00aa.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:51 -04:00
Artem Bityutskiy
d0490eea14 jffs2: remove unnecessary GC pass on umount
We do not need to call 'jffs2_write_super()' on unmount. This function
causes a GC pass to make sure the current contents is pushed out with
the data which we already have on the media.

But this is not needed on unmount and only slows unmount down unnecessarily.
It is enough to just sync the write-buffer.

This call was added by one of the generic VFS rework patch-sets,
see 8c85e12512.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:51 -04:00
Artem Bityutskiy
3a0c0e26b6 jffs2: remove lock_super
We do not need 'lock_super()'/'unlock_super()' in JFFS2 - kill them.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:51 -04:00
Al Viro
bb8ac181a5 bury __kernel_nlink_t, make internal nlink_t consistent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:50 -04:00
Al Viro
1dfb5751a4 parisc: get rid of nlink_t, switch to explicitly-sized type
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:50 -04:00
Al Viro
e57f93cc53 powerpc: get rid of nlink_t uses, switch to explicitly-sized type
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:35 -04:00
Olof Johansson
47e1993d32 Merge branches 'fixes' and 'fixes2' into devel-late
* fixes:
  ixp4xx: fix compilation by adding gpiolib support

* fixes2:
  ARM: LPC32xx: Adjust dts files to gpio dt binding
2012-05-30 16:16:12 -07:00
Roland Stigge
a035254aef ARM: LPC32xx: Adjust dts files to gpio dt binding
The GPIO devicetree binding in 3.5 doesn't register the various LPC32xx GPIO
banks via DT subnodes but always all at once, and changes the gpio referencing
to 3 cells (bank, gpio, flags). This patch adjusts the DTS files to this
binding that was just accepted to the gpio subsystem.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-30 16:15:53 -07:00
Stefan Richter
5f2a3d6191 sbp-target: rename a variable to avoid name clash
'int login_id' shadows 'static atomic_t login_id'.
Seen as compilation warning on x86-32.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-30 16:15:33 -07:00
Konrad Rzeszutek Wilk
1ab46fd319 x86, amd, xen: Avoid NULL pointer paravirt references
Stub out MSR methods that aren't actually needed.  This fixes a crash
as Xen Dom0 on AMD Trinity systems.  A bigger patch should be added to
remove the paravirt machinery completely for the methods which
apparently have no users!

Reported-by: Andre Przywara <andre.przywara@amd.com>
Link: http://lkml.kernel.org/r/20120530222356.GA28417@andromeda.dapyr.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
2012-05-30 16:15:02 -07:00
Olof Johansson
63bda79dc4 Merge branch 'late/board' into devel-late
* late/board:
  ARM: S3C64XX: Hook up carrier class modules on Cragganmore
  ARM: S3C64XX: Initial hookup for Bells module on Cragganmore
2012-05-30 16:06:56 -07:00
Olof Johansson
929d138a3b Merge branch 'late/soc' into devel-late
* late/soc:
  ARM: vexpress: Remove twice included header files
  ARM: vexpress: Device Tree updates
  ARM: EXYNOS: Support suspend and resume for EXYNOS5250
  ARM: EXYNOS: Add Clock register list for save and restore
  ARM: EXYNOS: Add PMU table for EXYNOS5250
  ARM: EXYNOS: Rename of function for pm.c
  ARM: EXYNOS: Remove GIC save & restore function
  ARM: dts: Add node for interrupt combiner controller on EXYNOS5250
  ARM: S3C24XX: add support for second irq set of S3C2416
2012-05-30 16:06:46 -07:00
Olof Johansson
d64f41d8d2 Merge branch 'late/cleanup' into devel-late
* late/cleanup:
  ARM: S3C64XX: use timekeeping wrapper on cpuidle
  ARM: S3C64XX: declare the states with the new api on cpuidle
2012-05-30 16:06:39 -07:00
Lee Jones
2e1d4a065a net/smsc911x: Repair broken failure paths
Current failure paths attempt to free resources which we failed to request
and disable resources which we failed to enable ones. This leads to kernel
oops/panic. This patch does some simple re-ordering to prevent this from
happening.

Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30 17:52:16 -04:00
Thomas Gleixner
82f7af09e6 x86/mce: Cleanup timer mess
Use unsigned long for dealing with jiffies not int. Rename the
callback to something sensible. Use __this_cpu_read/write for
accessing per cpu data.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-05-30 14:40:01 -07:00
zhenzhong.duan
2da06af810 x86, mtrr: Fix a type overflow in range_to_mtrr func
When boot on sun G5+ with 4T mem, see an overflow in mtrr cleanup as below.

*BAD*gran_size: 2G      chunk_size: 2G  num_reg: 10     lose cover RAM:
-18014398505283592M

This is because 1<<31 sign extended. Use an unsigned long constant to
fix it.  Useful for mem larger than or equal to 4T.

-v2: Use 64bit constant instead of explicit type conversion as suggested
by Yinghai. Description updated too.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Link: http://lkml.kernel.org/r/4FC5A77F.6060505@oracle.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-30 14:37:00 -07:00
Konrad Rzeszutek Wilk
8c9ce606a6 xen/blkback: Copy id field when doing BLKIF_DISCARD.
We weren't copying the id field so when we sent the response
back to the frontend (especially with a 64-bit host and 32-bit
guest), we ended up using a random value. This lead to the
frontend crashing as it would try to pass to __blk_end_request_all
a NULL 'struct request' (b/c it would use the 'id' to find the
proper 'struct request' in its shadow array) and end up crashing:

BUG: unable to handle kernel NULL pointer dereference at 000000e4
IP: [<c0646d4c>] __blk_end_request_all+0xc/0x40
.. snip..
EIP is at __blk_end_request_all+0xc/0x40
.. snip..
 [<ed95db72>] blkif_interrupt+0x172/0x330 [xen_blkfront]

This fixes the bug by passing in the proper id for the response.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=824641

CC: stable@kernel.org
Tested-by: William Dauchy <wdauchy@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-30 17:20:04 -04:00
Paulo Zanoni
9d9740f099 drm/i915: add some barriers when changing DIPs
On IVB and older, we basically have two registers: the control and the
data register. We write a few consecutitve times to the control
register, and we need these writes to arrive exactly in the specified
order.

Also, when we're changing the data register, we need to guarantee that
anything written to the control register already arrived (since
changing the control register can change where the data register
points to). Also, we need to make sure all the writes to the data
register happen exactly in the specified order, and we also *can't*
read the data register during this process, since reading and/or
writing it will change the place it points to.

So invoke the "better safe than sorry" rule and just be careful and
put barriers everywhere :)

On HSW we still have a control register that we write many times, but
we have many data registers.

Demanded-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 23:05:08 +02:00
Paulo Zanoni
c30b611090 drm/i915: remove comment about HSW HDMI DIPs
HSW support is now just like all the other generations: we send AVI
and SPD InfoFrames. There are other DIPs for HSW, but there are other
DIPs for the previous generations too. For each gen, we can see which
DIPs are missing by looking at the 'set_infoframes' function: we
explicitly disable the DIPs we're not using.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 23:04:27 +02:00
Paulo Zanoni
b659c3dbe1 drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI
The register that controls the HDMI port can be used to control the
sDVO port. Some bits are defined only for sDVO, and SDVO_BORDER_ENABLE
is one of those: HDMI ports that can't be used in sDVO mode don't even
have this bit defined in their specifications.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 23:04:10 +02:00
Paulo Zanoni
9d32d1653d drm/i915: don't write 0 to DIP control at HDMI init
At this time, the HDMI port is enabled, and the DIP control register
specification says we need to disable the port *before* disabling the
DIPs. Also, while doing this we risk telling the HW to send the AVI
DIPs once (not every VSync), which really seems to confuse the HW and
trigger bugs where the DIPs are not sent.

This code was here just to set the DIP register to a 'known state'
before using it, but since now the set_infoframes functions already
set the control registers to a known state, this code can go away.

Also, the previous code disables *all* the DIP registers for *each*
HDMI port, so we end disabling each DIP register more than once.

This patch solves a problem I can reproduce on my IVB machine. When I
boot it with just a single HDMI monitor, the AVI InfoFrames are not
sent. With this patch, the InfoFrames are sent. Previously, I wrote a
patch to 'touch the DIP registers after we enable the HDMI port' to
solve this same problem, but that patch doesn't seem to be needed
anymore after this patch.

All this patch does is revert a chunk of the following commit:

    commit 64a8fc0145
    Author: Jesse Barnes <jbarnes@virtuousgeek.org>
    Date:   Thu Sep 22 11:16:00 2011 +0530

        drm/i915: fix ILK+ infoframe support

So bugs that can be bisected to that commit may be fixed now.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43256
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 23:03:39 +02:00
Paulo Zanoni
72b78c9d19 drm/i915: disable DIP while changing the port
The register specification says we need to do this.

V2: Only write the register if the port is enabled.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 23:01:09 +02:00
Paulo Zanoni
0dd87d2084 drm/i915: explicitly disable the DIPs we're not using
From this point on, the 'set_infoframe' functions always set the DIP
registers to a known state, so anything done will always be undone at
the modeset.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 22:51:20 +02:00
Michael S. Tsirkin
3bbf372c6c virtio-net: remove useless disable on freeze
disable_cb is just an optimization: it
can not guarantee that there are no callbacks.
In particular it doesn't have any effect when
event index is on.

Instead, detach, napi disable and reset on freeze ensure we don't run
concurrently with a callback.

Remove the useless calls so we get same behaviour
with and without event index.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30 16:36:15 -04:00
Joe Perches
0053ea9c34 netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG
Make netif_dbg use dynamic debugging whenever
CONFIG_DYNAMIC_DEBUG is enabled.

commit b558c96ffa
("dynamic_debug: make dynamic-debug supersede DEBUG ccflag")
missed updating the netif_dbg variant.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30 16:34:27 -04:00
Paulo Zanoni
5cde2a62e8 drm/i915: don't wait for vblank while writing InfoFrames
This function is called when the pipe is disabled, so it always gets
the 50ms timeout.

This function is called once for each InfoFrame, so we actually get a
100ms timeout. Will be more if we add more InfoFrames.

Also, the spec says we need to "wait for a VSync to ensure completion
of any pending DIP transmissions", not for a VBlank. OTOH, the
register documentation suggests that the DIPs are sent *during* the
VSync, so shouldn't we be waiting until *after* the VSync to ensure
all DIPs are sent?

So this wait_for_vblank seems, besides useless, totally wrong.

If we ever want to change some specific InfoFrame on-the-fly (outside
of the modeset code), the code that changes the InfoFrame will have to
do the waiting itself, and properly.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 21:52:46 +02:00
Paulo Zanoni
822974aea8 drm/i915: enable DIP before enabling each InfoFrame
So the write_infoframe function can assume the DIP is on.

V2: Be more defensive and add WARN().

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 21:51:03 +02:00
Paulo Zanoni
f278d97215 drm/i915: only set the HDMI port on the DIP once
Not once for each InfoFrame. Now we have a function that allows us to
do this.

[danvet: Paulo clarified on irc that a later bugfix patch needs this
cleanup.]

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 21:50:33 +02:00
Paulo Zanoni
0c14c7f957 drm/i915: properly alternate between DVI and HDMI
This solves problems that happen when you alternate between HDMI and
DVI on the same port. I can reproduce these problems using DP->HDMI
and DP->DVI adapters on a DP port.

When you first plug HDMI and then plug DVI, you need to stop sending
DIPs, even if the port is in DVI mode (see the HDMI register spec). If
you don't stop sending DIPs, you'll see a pink vertical line on the
left side of the screen, some modes will give you a black screen, some
modes won't work correctly.

When you first plug DVI and then plug HDMI, you need to properly
enable the DIPs, otherwise the HW won't send them. After spending a
lot of time investigating this, I concluded that if the DIPs are
disabled, we should not write to the DIP register again because when
we do this, we also set the AVI InfoFrame frequency to "once", and
this seems to really confuse our hardware. Since this problem was not
exactly easy to debug, I'm adopting the defensive behavior and not
just avoing the "disable twice" sequence, but also explicitly
selecting the AVI InfoFrame and setting its frequency to a correct
one.

Also, move the "is_dvi" check from intel_set_infoframe to the
set_infoframes functions since now they're going to be the first ones
to deal with the DIP registers.

This patch adds the code to fix the problem, but it depends on the
removal of some code that can't be removed right now and will come
later in the patch series. The patch that we need is:
  - drm/i915: don't write 0 to DIP control at HDMI init

[danvet: Paulo clarified that this additional patch is only required
to make the fix complete, this patch here alone doesn't introduce a
regression but only partially solves the problem of randomly clearing
the dip registers.]

V2: Be even more defensive by selecting AVI and setting its frequency
outside the "is_dvi" check.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 21:38:21 +02:00
Paulo Zanoni
687f4d06db drm/i915: add set_infoframes to struct intel_hdmi
We need a function that is able to fully 'set' the state of the DIP
registers to a known state.

Currently, we have the write_infoframe function that is called twice:
once for AVI and once for SPD. The problem is that write_infoframe
tries to keep the state of the DIP register as it is, changing only
the minimum necessary bits. The second problem is that
write_infoframe does twice (once for each time it is called) some
work that should be done only once (like waiting for vblank and
setting the port). If we add even more DIPs, it will do even more
repeated work.

This patch only adds the infrastructure keeping the code behavior the
same as before.

v2: add static keywords

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-30 21:36:58 +02:00
H. Peter Anvin
bbd771474e Merge branch 'x86/trampoline' into x86/urgent
x86/trampoline contains an urgent commit which is necessarily on a
newer baseline.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-30 12:11:32 -07:00
Linus Torvalds
af56e0aa35 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph updates from Sage Weil:
 "There are some updates and cleanups to the CRUSH placement code, a bug
  fix with incremental maps, several cleanups and fixes from Josh Durgin
  in the RBD block device code, a series of cleanups and bug fixes from
  Alex Elder in the messenger code, and some miscellaneous bounds
  checking and gfp cleanups/fixes."

Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the
networking people preferring "unsigned int" over just "unsigned".

* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits)
  libceph: fix pg_temp updates
  libceph: avoid unregistering osd request when not registered
  ceph: add auth buf in prepare_write_connect()
  ceph: rename prepare_connect_authorizer()
  ceph: return pointer from prepare_connect_authorizer()
  ceph: use info returned by get_authorizer
  ceph: have get_authorizer methods return pointers
  ceph: ensure auth ops are defined before use
  ceph: messenger: reduce args to create_authorizer
  ceph: define ceph_auth_handshake type
  ceph: messenger: check return from get_authorizer
  ceph: messenger: rework prepare_connect_authorizer()
  ceph: messenger: check prepare_write_connect() result
  ceph: don't set WRITE_PENDING too early
  ceph: drop msgr argument from prepare_write_connect()
  ceph: messenger: send banner in process_connect()
  ceph: messenger: reset connection kvec caller
  libceph: don't reset kvec in prepare_write_banner()
  ceph: ignore preferred_osd field
  ceph: fully initialize new layout
  ...
2012-05-30 11:17:19 -07:00
Linus Torvalds
65a50c951a Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf ui browser: Stop using 'self'
  perf annotate browser: Read perf config file for settings
  perf config: Allow '_' in config file variable names
  perf annotate browser: Make feature toggles global
  perf annotate browser: The idx_asm field should be used in asm only view
  perf tools: Convert critical messages to ui__error()
  perf ui: Make --stdio default when TUI is not supported
  tools lib traceevent: Silence compiler warning on 32bit build
  perf record: Fix branch_stack type in perf_record_opts
  perf tools: Reconstruct event with modifiers from perf_event_attr
  perf top: Fix counter name fixup when fallbacking to cpu-clock
  perf tools: fix thread_map__new_by_pid_str() memory leak in error path
  perf tools: Do not use _FORTIFY_SOURCE when DEBUG=1 is specified
  tools lib traceevent: Fix signature of create_arg_item()
  tools lib traceevent: Use proper function parameter type
  tools lib traceevent: Fix freeing arg on process_dynamic_array()
  tools lib traceevent: Fix a possibly wrong memory dereference
  tools lib traceevent: Fix a possible memory leak
  tools lib traceevent: Allow expressions in __print_symbolic() fields
  perf evlist: Explicititely initialize input_name
  ...
2012-05-30 11:12:00 -07:00
Avik Sil
ea1b3ebac9 perf tools: Fix pager on minimal-install embedded systems
Some Distributions may lack "less" package being included by default,
e.g., Linaro nano rootfs. In those cases use the portable "pager"
command instead of "less".

Signed-off-by: Avik Sil <avik.sil@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338287725-26382-1-git-send-email-avik.sil@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 15:10:39 -03:00
Arnaldo Carvalho de Melo
f1439c315b perf tools: Fix make tarballs
The patch series that introduced the top level tools/ makefile and the
libtraceevent broke this feature where files needed to build in a
detached tarball were not included in the MANIFEST file and thus not
included in the tarball.

Fix it by adding the relevant files to the MANIFEST.

Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-z3mjj74927xvqwhlmu18kj80@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 15:05:59 -03:00
David Ahern
52deff71bc perf script: Fix regression in callchain dso name
$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
    ffffffff815f65c9 __schedule ([kernel.kallsyms])
    ffffffff81087cea __cond_resched ([kernel.kallsyms])
    ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
    ffffffff815fb87a do_page_fault ([kernel.kallsyms])
    ffffffff815f8465 page_fault ([kernel.kallsyms])
        2b7a71ea0303 _dl_lookup_symbol_x ([kernel.kallsyms])
        2b7a71ea1eb5 _dl_relocate_object ([kernel.kallsyms])
        2b7a71e99b2e dl_main ([kernel.kallsyms])
        2b7a71eab7f4 _dl_sysdep_start ([kernel.kallsyms])

All DSO's in a callchain are printed as [kernel.kallsyms].

git bisect chased it to:

547a92e0ae is the first bad commit
commit 547a92e0ae
Author: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Date:   Mon Jan 30 13:42:57 2012 +0900

    perf script: Unify the expressions indicating "unknown"

    The perf script command uses various expressions to indicate "unknown".

    It is unfriendly for user scripts to parse it. So, this patch unifies
    the expressions to "[unknown]".

Looks like a copy-paste in that the other references use al.map but this one
should be node->map.

With this patch you get:

$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
    ffffffff815f65c9 __schedule ([kernel.kallsyms])
    ffffffff81087cea __cond_resched ([kernel.kallsyms])
    ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
    ffffffff815fb87a do_page_fault ([kernel.kallsyms])
    ffffffff815f8465 page_fault ([kernel.kallsyms])
        2b7a71ea0303 _dl_lookup_symbol_x (/lib64/ld-2.14.90.so)
        2b7a71ea1eb5 _dl_relocate_object (/lib64/ld-2.14.90.so)
        2b7a71e99b2e dl_main (/lib64/ld-2.14.90.so)
        2b7a71eab7f4 _dl_sysdep_start (/lib64/ld-2.14.90.so)

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1338353906-60706-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 14:24:38 -03:00
H. Peter Anvin
319b6ffc6d x86, realmode: Unbreak the ia64 build of drivers/acpi/sleep.c
Revert usage of acpi_wakeup_address and move definition
to x86 architecture code in order to make compilation work
in ia64.

[jsakkine: tested compilation in ia64/x86-64 and added
proper commit message]

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Originally-by: H. Peter Anvin <hpa@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1338370421-27735-1-git-send-email-jarkko.sakkinen@intel.com
Cc: Tony Luck <tony.luck@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-30 10:12:48 -07:00
Linus Torvalds
42fe55ce90 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull i2c updates from Jean Delvare.

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING
  i2c-dev: Add support for I2C_M_RECV_LEN
2012-05-30 10:03:46 -07:00
Arnaldo Carvalho de Melo
79695e1bb6 perf stat: Initialize default events wrt exclude_{guest,host}
When no event is specified the tools use perf_evlist__add_default(), that will
call event_attr_init to initialize the KVM exclusion bits.

When the change was made to the tools so that by default guest samples would be
excluded, the changes were made just to the parsing routines and to
perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far
just by perf stat to add multiple events, according to the level of detail
specified.

Recently the tools were changed to reconstruct the event name from all the
details in perf_event_attr, not just from .type and .config, but taking into
account all the feature bits (.exclude_{guest,host,user,kernel,etc},
.precise_ip, etc).

That is when we noticed that the default for perf stat wasn't the one for the
rest of the tools, i.e. the .exclude_guest bit wasn't being set.

I.e. the default, that doesn't call event_attr_init was showing the :HG
modifier:

  $ perf stat usleep 1

   Performance counter stats for 'usleep 1':

            0.942119 task-clock                #    0.454 CPUs utilized
                   1 context-switches          #    0.001 M/sec
                   0 CPU-migrations            #    0.000 K/sec
                 126 page-faults               #    0.134 M/sec
             693,193 cycles:HG                 #    0.736 GHz                     [40.11%]
             407,461 stalled-cycles-frontend:HG #   58.78% frontend cycles idle    [72.29%]
             365,403 stalled-cycles-backend:HG #   52.71% backend  cycles idle
             465,982 instructions:HG           #    0.67  insns per cycle
                                               #    0.87  stalled cycles per insn
              89,760 branches:HG               #   95.275 M/sec
               6,178 branch-misses:HG          #    6.88% of all branches

         0.002077228 seconds time elapsed

While if one explicitely specifies the same events, which will make the parsing code
to be called and thus event_attr_init is called:

  $ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1

   Performance counter stats for 'usleep 1':

            1.040349 task-clock                #    0.500 CPUs utilized
                   2 context-switches          #    0.002 M/sec
                   0 CPU-migrations            #    0.000 K/sec
                 127 page-faults               #    0.122 M/sec
             587,966 cycles                    #    0.565 GHz                     [13.18%]
             459,167 stalled-cycles-frontend   #   78.09% frontend cycles idle
             390,249 stalled-cycles-backend    #   66.37% backend  cycles idle
             504,006 instructions              #    0.86  insns per cycle
                                               #    0.91  stalled cycles per insn
              96,455 branches                  #   92.714 M/sec
               6,522 branch-misses             #    6.76% of all branches         [96.12%]

         0.002078681 seconds time elapsed

Fix it by introducing a perf_evlist__add_default_attrs method that will call
evlist_attr_init in all the perf_event_attr entries before adding the events.

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 14:02:38 -03:00
Linus Torvalds
19ce0a995f Merge git://www.linux-watchdog.org/linux-watchdog
Pull second set of watchdog updates from Wim Van Sebroeck:
 "This changeset contains following changes:
   * Add support for multiple watchdog devices.  We use dynamically
     allocated device id's for this.
   * Add locking into the generic watchdog infrastructure.
   * Add support for dynamically allocated watchdog_device structs so
     that we can deal with devices that get unbound.
   * convert following drivers to the generic watchdog framework:
     sch5627, sch5636 and sp805_wdt.
   * Add DA9052/53 PMIC watchdog support
   * Fix printk format warnings for iTCO_wdt.c"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: iTCO_wdt.c: fix printk format warnings
  watchdog: sp805_wdt: Add clk_{un}prepare support
  watchdog: sp805_wdt: convert to watchdog core
  hwmon/sch56xx: Depend on watchdog for watchdog core functions
  watchdog: sch56xx-common: set correct bits in register()
  Watchdog: DA9052/53 PMIC watchdog support
  watchdog: sch56xx-common: Add proper ref-counting of watchdog data
  watchdog: sch56xx: Remove unnecessary checks for register changes
  watchdog: sch56xx: Use watchdog core
  watchdog: Add support for dynamically allocated watchdog_device structs
  watchdog: Add Locking support
  watchdog: watchdog_dev: Rewrite wrapper code
  watchdog: use dev_ functions
  watchdog: create all the proper device files
  watchdog: Add a flag to indicate the watchdog doesn't reboot things
  watchdog: Add multiple device support
  watchdog: watchdog_core.h: make functions extern
  watchdog: correct the name of the watchdog_core inlude file
  watchdog: Add watchdog_active() routine
  watchdog: watchdog_dev: include private header to pickup global symbol prototypes
2012-05-30 09:59:13 -07:00