Commit graph

336,024 commits

Author SHA1 Message Date
Clemens Ladisch
26c72e22c9 firewire: sbp2: document the absence of alignment requirements
The SBP-2/3 specifications do not require any alignment of data
buffers; only their own data structures need to be quadlet-aligned
[SR: or octlet-aligned].

Fix the comments to reflect this, but leave the actual alignment at
32 bits to avoid theoretical problems with target implementations
that might handle this incorrectly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:49:44 +02:00
Linus Torvalds
8e95a53ba4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin
Pull blackfin changes from Bob Liu:
 "The biggest change was added an new processor(bf60x series).

  Bf60x series processor of blackfin can up to 1GHz with Hardware
  Support for HD Video Analytics, it use the same blackfin ISA but with
  some changes on system buses, interrupt controller and peripheral
  devices.

  Added dir arch/blackfin/mach-bf609/ and did some changes to the
  framework made linux working fine on the reference board bf609-ezkit
  now."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (41 commits)
  blackfin: fix build after add bf60x mach/pm.h
  blackfin: twi: include linux/i2c.h
  blackfin: bf60x: add head file for crc controller
  blackfin: bf60x: twi: work around temporary anomaly 0501001
  blackfin: twi: Move TWI MMR access macro to twi head file
  blackfin: twi: Move TWI peripheral pin request array to platform data
  blackfin: bf60x: anomaly: Add a temporary anomaly 0501001
  blackfin: bf60x: Rename the DDR controller macro
  blackfin: mach-bf609: pm: cleanup bfin_deepsleep
  blackfin: bf60x: cleanup get clock code
  blackfin: bf60x: pm: Add a debug option to calculate kernel wakeup time.
  blackfin: bf60x: add wakeup source select
  blackfin: bf60x: make clock changeable in kernel menuconfig
  blackfin:mach-bf609: fix norflash for bf609-ezkit
  blackfin: mach-bf609: add can_wakeup to ethernet device
  blackfin: remove redundant CONFIG_BF60x macro
  blackfin: rotary: Add pm_wakeup flag to platform data structure.
  bfin_gpio: fix bf548-ezkit kernel fail to boot
  bfin_dma: fix initcall return error in proc_dma_init()
  Blackfin: delete fork func
  ...
2012-05-21 12:47:53 -07:00
Linus Torvalds
cd975ae0ce Clean up some c6x Kconfig items and add support for Elf FDPIC loader.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPunCjAAoJEOiN4VijXeFPR3cP+gLDhWJGWC/xnI+vr1WJJxZU
 xJQbaopEyqJa7GBT+3BasCCLUCU7MVIrYaqubzEI4dzVCMDxwuJYPT7m/N3Avssg
 bm1ZaLUnanc8ZLfLHlnsG02xtBtEYI4mUM7ggCfcDJJC0b7tDGcz0kiM2WDGK0fq
 LRbZmlC57qK0UTx2IEvl0DoMuH7pq7N1sSXFr6keBm/lqN7Qj3VtAf/ASVQdIgN8
 TfQiWbu40v8EEcKAZSkVKvhS3kSiPI9Dr1DGeR1JIhjFqFYUaw52aOzNTJyC9k1g
 4oPIoDh0xnSzYrYpetP1gN5bT/FMRcVXLvKM7cIbeUzoAlgnQsBDAGA7x205X8Bf
 ChrQEpm/yKZnwEBtp9uIEQY3rRT7iecqVgeVO5LXskg+/OX0+gO5CtCDPopWzqJN
 wSOCsP9va0G9W0a8G5hKqEGYhbCXDkzU6KzmcgxbxIeF+CvJ+72mWgqxJkF0GtuU
 KCoLQT7Necq+4p/SaiXL7KogS9m2rClbszManceyAYSGwqAPIfU3RzUw+Fz6NcIh
 DrYXNTZelrVN2wrVrlhn3B6GdgfyVabhQ1e3CftmAtbY/i+i/ArHCT9JxjyAHTuV
 ekTnpVVDBZUCUluJXFJKzrvRuSUt9X18AxK0NfJ+xglOPQnPh026K/sCuvmn6mAq
 U1f1XmCqG2l2TDtkZ6Wu
 =q4Z6
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull c6x updates from Mark Salter:
 "Clean up some c6x Kconfig items and add support for Elf FDPIC loader."

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  C6X: remove unused config items
  C6X: add support to build with BINFMT_ELF_FDPIC
  C6X: change main arch kbuild symbol
2012-05-21 12:46:48 -07:00
Linus Torvalds
881bcabbde Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Setup CROSS_COMPILE at the top
  m68k: Correct the Atari ALLOWINT definition
  m68k/video: Create <asm/vga.h>
  m68k: Make sure {read,write}s[bwl]() are always defined
  m68k/mm: Port OOM changes to do_page_fault()
  scsi/atari: Make more functions static
  scsi/atari: Revive "atascsi=" setup option
  net/ariadne: Improve debug prints
  m68k/atari: Change VME irq numbers from unsigned long to unsigned int
  m68k/amiga: Use arch_initcall() for registering platform devices
  m68k/amiga: Add error checks when registering platform devices
  m68k/amiga: Mark z_dev_present() __init
  m68k: Remove unused MAX_NOINT_IPL definition
2012-05-21 12:43:54 -07:00
Clemens Ladisch
935f672e02 firewire: sbp2: remove superfluous blk_queue_max_segment_size() call
The SCSI framework automatically initializes the block queue's segment
size with the DMA device's segment size.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:42:51 +02:00
Clemens Ladisch
f203022353 firewire: sbp2: use scsi_dma_(un)map
Use the scsi_dma_map/scsi_dma_unmap helper to simplify the code
a little.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:42:51 +02:00
Clemens Ladisch
473ffe6560 firewire: sbp2: give correct DMA device to scsi framework
The sbp2 driver does DMA not on the unit but on the card device.

The driver worked even with the wrong device because at the moment, it
happens to reimplement the DMA functions of the SCSI framework.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21 21:42:51 +02:00
Linus Torvalds
e60b9a0346 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "Just a random collection of bug-fixes and cleanups, nothing new in
  this merge request."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
  s390/ap: Fix wrong or missing comments
  s390/ap: move receive callback to message struct
  s390/dasd: re-prioritize partition detection message
  s390/qeth: reshuffle initialization
  s390/qeth: cleanup drv attr usage
  s390/claw: cleanup drv attr usage
  s390/lcs: cleanup drv attr usage
  s390/ctc: cleanup drv attr usage
  s390/ccwgroup: remove ccwgroup_create_from_string
  s390/qeth: stop using struct ccwgroup driver for discipline callbacks
  s390/qeth: switch to ccwgroup_create_dev
  s390/claw: switch to ccwgroup_create_dev
  s390/lcs: switch to ccwgroup_create_dev
  s390/ctcm: switch to ccwgroup_create_dev
  s390/ccwgroup: exploit ccwdev_by_dev_id
  s390/ccwgroup: introduce ccwgroup_create_dev
  s390: fix race on TIF_MCCK_PENDING
  s390/barrier: make use of fast-bcr facility
  s390/barrier: cleanup barrier functions
  s390/claw: remove "eieio" calls
  ...
2012-05-21 12:41:17 -07:00
Stefan Richter
0ad8c6a22d Linux 3.4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPuXBKAAoJEHm+PkMAQRiGzgwH/2F+JOth4pkcGvw0S2Sf1+MS
 iNgYK08xOp/f5VbP8lOfTFjPhCwggSQrq+B2TF2bWYz6vmsQq1e5X319Lcy7cb9h
 GV3HJRKuC38fxT1unXxY+oQYvIRNmNSGD2H1jrb6Ee3gd8tYZ77qxFGskx6sXos2
 74fRiqXQ1AiEj9Sh+6XSYtRwxBfwdGu1RAtpykoZiPfD3+eq07Rhy+r75AtRLKue
 lwHK03hMsRtevGftAFC2q76VVhOFa9EsZ3dMa2Fj1iOcRYEnGy7UnLrgqqyFk1he
 l5ULsg8RPCUunBJuKdmYeIMAKc3ucSv+MuOWzGcYGsja3U6sJbdE+3TUPI3/OWE=
 =8Z08
 -----END PGP SIGNATURE-----

Merge tag 'v3.4' with SCSI updates, needed for subsequent firewire-sbp2 changes

Linux 3.4
2012-05-21 21:39:42 +02:00
Jarkko Sakkinen
b2d668da93 x86, relocs: Build clean fix
relocs was not cleaned up when "make clean" is issued. This
patch fixes the issue.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1337622684-6834-1-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org> v3.4
2012-05-21 12:19:37 -07:00
H. Peter Anvin
d13a822e6d Merge commit 'v3.4' into x86/urgent 2012-05-21 12:17:50 -07:00
Richard Weinberger
875682648b irq: Remove irq_chip->release()
As it's only user (UML) does no longer need it we can get
rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 21:09:38 +02:00
Richard Weinberger
985a94a96d um: Remove CONFIG_IRQ_RELEASE_METHOD
UML does no longer need CONFIG_IRQ_RELEASE_METHOD.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 21:09:37 +02:00
Richard Weinberger
8e514b2a81 um: Remove usage of irq_chip->release()
UML does no longer need irq_chip->release().

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 21:09:36 +02:00
Richard Weinberger
fa7a0449e0 um: Implement um_free_irq()
Instead of using chip->release() we can achieve the same
using a simple wrapper for free_irq().
We have already um_request_irq(), so um_free_irq() is the perfect
counterpart.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21 21:09:36 +02:00
Richard Weinberger
2b76ebaa72 um: Fix __swp_type()
The current __swp_type() function uses a too small bitshift.
Using more than one swap files causes bad pages because
the type bits clash with other page flags.

CC: stable@kernel.org
Analyzed-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-05-21 21:09:35 +02:00
Richard Weinberger
f15b9000eb um: Implement a custom pte_same() function
UML uses the _PAGE_NEWPAGE flag to mark pages which are not jet
installed on the host side using mmap().
pte_same() has to ignore this flag, otherwise unuse_pte_range()
is unable to unuse the page because two identical
page tables entries with different _PAGE_NEWPAGE flags would not
match and swapoff() would never return.

CC: stable@kernel.org
Analyzed-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-05-21 21:09:34 +02:00
Richard Weinberger
62179d47c2 um: Add BUG() to do_ops()'s error path
In case we encounter a bad operation in do_ops() something is really
broken and it's better to BUG().

Signed-off-by: Richard Weinberger <richard@nod.at>
2012-05-21 21:09:33 +02:00
Richard Weinberger
54ce9256ad um: Remove unused variables
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-05-21 21:09:32 +02:00
Daniel Vetter
65e8186602 drm/i915: be more careful when returning -ENXIO in gmbus transfer
... flaky ddc hardware can cause a spurious NAK, resulting in the i2c
core and drm edid functions not trying to retry the edid transfer.

Luckily the gmbus quiescenting also times out for these cases, so we
can get out of this mess by returning -ETIMEDOUT for this specific
case. This way we keep the fast-fail of returning -ENXIO if there is
no device present, speeding up the boot process.

This regression has been introduced in

commit e646d57735
Author: Daniel Kurtz <djkurtz@chromium.org>
Date:   Fri Mar 30 19:46:38 2012 +0800

    drm/i915/intel_i2c: always wait for IDLE before clearing NAK

v2: Return -ETIMEDOUT for this case and keep the -ENXIO for real NAKs,
suggested by Daniel Kurtz.

Cc: Daniel Kurtz <djkurtz@chromium.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49518
Reported-and-Tested-by: Julian Simioni <julian.simioni@gmail.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-21 21:04:21 +02:00
Al Viro
70b58d896b arm: don't open-code ptrace_report_syscall()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:40:44 -04:00
Al Viro
7d181b9626 arm: bury unused _TIF_RESTORE_SIGMASK
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:40:20 -04:00
Al Viro
fa18484d09 arm: remove unused restart trampoline
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:39:44 -04:00
Al Viro
6b5c8045ec arm: new way of handling ERESTART_RESTARTBLOCK
new "syscall start" flag; handled in syscall_trace() by switching
syscall number to that of syscall_restart(2).  Restarts of that
kind (ERESTART_RESTARTBLOCK) are handled by setting that bit;
syscall number is not modified until the actual call.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:39:11 -04:00
Al Viro
21c1176a72 arm: if we get into work_pending while returning to kernel mode, just go away
checking in do_signal() is pointless - if we get there with !user_mode(regs)
(and we might), we'll end up looping indefinitely.  Check in work_pending
and break out of the loop if so.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:38:24 -04:00
Al Viro
d9be5ea6f9 arm: don't call try_to_freeze() from do_signal()
get_signal_to_deliver() will handle it itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:37:56 -04:00
Al Viro
7dfae72027 arm: if there's no handler we need to restore sigmask, syscall or no syscall
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:36:45 -04:00
Al Viro
84849b3ed8 arm: trim _TIF_WORK_MASK, get rid of useless test and branch...
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:36:32 -04:00
Al Viro
7f1b5a9966 arm: missing checks of __get_user()/__put_user() return values
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:36:30 -04:00
Al Viro
c6802f4370 um: bury unused _TIF_RESTORE_SIGMASK
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:22:25 -04:00
Al Viro
5a30a798fb um: wrong sigmask saved in case of multiple sigframes
we can't just find oldmask once; if there are multiple signals
and we loop building sigframes for those, ->saved_mask will be
definitely wrong for all but the first one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:20:27 -04:00
Al Viro
d50349b0c3 um: add TIF_NOTIFY_RESUME
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:19:53 -04:00
Al Viro
3b7d15bde5 um: ->restart_block.fn needs to be reset on sigreturn
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 14:19:31 -04:00
Chris Wilson
78d56d78c3 drm/i915/dp: For consistency use the DP hotplug synonyms
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-21 20:15:51 +02:00
Chris Wilson
8ec22b214d drm/i915/hdmi: Query the live connector status bit for G4x
Similar to g4x_dp_detect() we should probe the PORT_HOTPLUG_STATUS as to
whether the connector is active prior to attempting to retrieve the EDID.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-21 20:15:48 +02:00
Chris Wilson
084b612ecf drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x
Note that gen3 is the only platform where we've got the bit
definitions right, hence the workaround of disabling sdvo hotplug
support on i945g/gm is not due to misdiagnosis of broken hotplug irq
handling ...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: add some blurb about sdvo hotplug fail on i945g/gm I've
wondered about while reviewing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-21 20:13:48 +02:00
Chris Wilson
10f76a3816 drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4
The status bits corresponding to the interrupt enable bits are the
"live" hotplug status bits, and reflect the current status of the port
(high for a detected connection, low for a disconnect). The actual bits
corresponding to the interrupt source are elsewhere. The actual event is
then determined by a combination of the interrupt flag and the current
live status (if the interrupt is active, but the current status is not,
then we have detected a disconnect.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-21 20:13:39 +02:00
Chris Wilson
adca473021 drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq
Also as we set the HOTPLUG_EN to 0 during pre-install, we can simply set
it during post-install, and nor do we wish to enable unwanted hotplug
events.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-21 20:13:35 +02:00
Stefano Stabellini
68c2c39a76 xen: do not map the same GSI twice in PVHVM guests.
PV on HVM guests map GSIs into event channels. At restore time the
event channels are resumed by restore_pirqs.

Device drivers might try to register the same GSI again through ACPI at
restore time, but the GSI has already been mapped and bound by
restore_pirqs. This patch detects these situations and avoids
 mapping the same GSI multiple times.

Without this patch we get:
(XEN) irq.c:2235: dom4: pirq 23 or emuirq 28 already mapped
and waste a pirq.

CC: stable@kernel.org
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-21 14:11:36 -04:00
Linus Torvalds
9daeaa3705 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:

1) Kill off support for sun4c and Cypress sun4m chips.

   And as a result we were able to also kill off that ugly btfixup thing
   that required multi-stage links of the final vmlinux image in the
   Kbuild system.  This should make the kbuild maintainers really happy.

   Thanks a lot to Sam Ravnborg for his tireless efforts to get this
   going.

2) Convert sparc64 to nobootmem.  I suspect now with sparc32 being a lot
   cleaner, it should be able to fall in line and modernize in this area
   too.

3) Make sparc32 use generic clockevents, from Tkhai Kirill.

[ I fixed up the BPF rules, and tried to clean up the build rules too.
  But I don't have - or want - a sparc cross-build environment, so the
  BPF rule bug and the related build cleanup was all done with just a
  bare "make -n" pseudo-test.      - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (110 commits)
  sparc32: use flushi when run-time patching in per_cpu_patch
  sparc32: fix cpuid_patch run-time patching
  sparc32: drop unused inline functions in srmmu.c
  sparc32: drop unused functions in pgtsrmmu.h
  sparc32,leon: move leon mmu functions to leon_mm.c
  sparc32,leon: remove duplicate definitions in leon.h
  sparc32,leon: remove duplicate UART register definitions
  sparc32,leon: move leon ASI definitions to asi.h
  sparc32: move trap table to a separate file
  sparc64: renamed ttable.S to ttable_64.S
  sparc32: Remove asm/sysen.h header.
  sparc32: Delete asm/smpprim.h
  sparc32: Remove unused empty_bad_page{,_table} declarations.
  sparc32: Kill boot_cpu_id4
  sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.h
  sparc32: Remove completely unused code from asm/cache.h
  sparc32: Add ucmpdi2.o to obj-y instead of lib-y.
  sparc32: add ucmpdi2
  sparc: introduce arch/sparc/Kbuild
  sparc: remove obsolete documentation
  ...
2012-05-21 10:32:01 -07:00
Sasha Levin
29d679ffd8 x86, printk: Add missing KERN_CONT to NMI selftest
Fix this behaviour:

----------------
| NMI testsuite:
--------------------
  remote IPI:
  ok  |

   local IPI:
  ok  |

Revealed due to a new modification to printk().

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Link: http://lkml.kernel.org/r/1336492573-17530-3-git-send-email-levinsasha928@gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-21 10:13:04 -07:00
Linus Torvalds
cb62ab71fe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...
2012-05-21 10:03:46 -07:00
Greg Kroah-Hartman
cda4db53e9 xhci/usb: Build error fixes for 3.5
Hi Greg,
 
 Here's four patches that fix the build errors introduced by the USB 3.0 Link PM
 patches.  Please pull for inclusion in 3.5.
 
 Sarah Sharp
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPumdCAAoJEBMGWMLi1Gc5veoQAKc+DKLsLrCvXXVPkVNIzrxh
 otE9eNyxqAHd5w7jeteSYwhbR5GfA912OJ6bItz2Bm0Sh/a+VI55QwMd8hV+OW4b
 nIo4Qu5urBsSI82qO9LQV1jS+DHHBAcRQec2FFR9h0Y8cTJkvMLjGcaCSOomvBGq
 HmQ3MRSyKfdUtbFc0pyfjzfbvAftI8Fq1r5XDuce0WXZSPDvlSTvqGCUK7nTo7Pb
 TIW2rLtOJG4xDi6S3gMwlEDilco40EJpem13GdJvoCwLi2bM+FVjTvYHkoSNqtut
 Pv02iyYE+a0mdpwQ5MOyNb0A+QbezyY1YbLF4ZmWRnPjKTOpu3PO1nLLHuWgVJDI
 kEtafG8tcVUcMCczN8Ft0JcHV34pFxLiT8pzJ86684zjRJ9QxlbDISsrZyS45oES
 4lfqgn8rfIV+Qks7MzgBgzDj6ALl+n4JTz4tFE7qK2p7KsLNy2d4gnukHmZvm0AP
 BWW9ACM5NfgDgADWLLGmMh+igCAAWCbrZE2fNcVGONEpDjGyoGZlQYdTyK4ZTHua
 0SzgFdHSvJmHVb7CXxyvcpFPUWznPje4XwkRm2XxkwJ79nl1WkWJwsLw4wMwFUB+
 Chp1wkwHd3U7RilkJJXNLkSeq59CkpxYDZa1FOqmfpYfLWupaFmdHm7Q+W7scM9z
 HXtI18OAErS1+DgSeypG
 =h+NT
 -----END PGP SIGNATURE-----

Merge tag 'for-usb-next-2012-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

xhci/usb: Build error fixes for 3.5

Hi Greg,

Here's four patches that fix the build errors introduced by the USB 3.0 Link PM
patches.  Please pull for inclusion in 3.5.

Sarah Sharp
2012-05-21 09:59:23 -07:00
Roland Dreier
cc169165c8 Merge branches 'core', 'cxgb4', 'ipath', 'iser', 'lockdep', 'mlx4', 'nes', 'ocrdma', 'qib' and 'raw-qp' into for-linus 2012-05-21 09:00:47 -07:00
Sarah Sharp
c88db160a3 xhci: Fix DIV_ROUND_UP compile error.
Fengguang reports that the xHCI driver isn't linked properly on his
machine:

ERROR: "__udivdi3" [drivers/usb/host/xhci-hcd.ko] undefined!
ERROR: "handle_edge_irq" [drivers/gpio/gpio-pch.ko] undefined!
ERROR: "irq_to_desc" [drivers/gpio/gpio-pch.ko] undefined!

The driver compiles fine on my 64-bit box (gcc version 4.6.1).
Fengguang thinks it's because the xHCI driver was using DIV_ROUND_UP()
instead of DIV_ROUND_UP_ULL() with arguments that were unsigned long
long variables.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Wu Fengguang <wfg@linux.intel.com>
2012-05-21 09:00:43 -07:00
Vipul Pandya
e572568fbc RDMA/cxgb4: Include vmalloc.h for vmalloc and vfree
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-21 09:00:34 -07:00
Sarah Sharp
b01bcbf7ae xhci: Fix compile with CONFIG_USB_SUSPEND=n
The USB 2.0 Link PM code is conditionally compiled when
CONFIG_USB_SUSPEND=y.  I believe that's a mistake, since Link PM is not
directly related to USB device suspend and Link PM is implemented
without relying on any of the suspend code in the USB core.  For now,
keep the USB 2.0 Link PM code conditionally compiled if
CONFIG_USB_SUSPEND=y.

This patch does move the code to implement USB 3.0 Link PM out of the
xHCI driver #ifdefs for CONFIG_USB_SUSPEND and moves it into a section
dependent on CONFIG_PM.  The USB core functions for USB 3.0 Link PM are
already conditionally compiled when CONFIG_PM=y.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-05-21 09:00:05 -07:00
Sarah Sharp
e9261fb62a USB: Fix core compile with CONFIG_USB_SUSPEND=n
When CONFIG_PM=n, make sure that the usb_[unlocked_][en/dis]able_lpm
declarations are visible in include/linux/usb.h, and exported from
drivers/usb/core/hub.c.

Before this patch, if CONFIG_USB_SUSPEND was turned off, it would cause
build errors:

drivers/usb/core/hub.c: In function 'usb_disable_lpm':
drivers/usb/core/hub.c:3394:2: error: implicit declaration of function 'usb_enable_lpm' [-Werror=implicit-function-declaration]
drivers/usb/core/hub.c: At top level:
drivers/usb/core/hub.c:3424:6: warning: conflicting types for 'usb_enable_lpm' [enabled by default]
drivers/usb/core/hub.c:3394:2: note: previous implicit declaration of 'usb_enable_lpm' was here
drivers/usb/core/driver.c: In function 'usb_probe_interface':
drivers/usb/core/driver.c:339:2: error: implicit declaration of function 'usb_unlocked_disable_lpm' [-Werror=implicit-function-declaration]
drivers/usb/core/driver.c:364:3: error: implicit declaration of function 'usb_unlocked_enable_lpm' [-Werror=implicit-function-declaration]
drivers/usb/core/message.c: In function 'usb_set_interface':
drivers/usb/core/message.c:1314:2: error: implicit declaration of function 'usb_disable_lpm' [-Werror=implicit-function-declaration]
drivers/usb/core/message.c:1323:3: error: implicit declaration of function 'usb_enable_lpm' [-Werror=implicit-function-declaration]
drivers/usb/core/message.c:1368:2: error: implicit declaration of function 'usb_unlocked_enable_lpm' [-Werror=implicit-function-declaration]

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Chen Peter-B29397 <B29397@freescale.com>
2012-05-21 09:00:03 -07:00
Sarah Sharp
c51fa66802 brcm80211: Fix compile error for .disable_hub_initiated_lpm.
Fix missing comma.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Wu Fengguang <wfg@linux.intel.com>
2012-05-21 08:59:19 -07:00
Greg Kroah-Hartman
8e192910d9 Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
This reverts commit 1996e6c572.

It turned out to not be needed, now that the real fix has been
committed.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21 08:54:43 -07:00