Commit graph

336,024 commits

Author SHA1 Message Date
Juan Gutierrez
1d8a0e963a ARM: OMAP: enable mailbox irq per instance
The machine-specific omap2_mbox_startup is called only once
to initialize the whole mbox module, and as a result,
enabling the mbox irq at that point only works for the very first
mailbox instance opened.

Instead, this patch makes sure enable_irq() is called every
time a new mbox instance is opened. In addition, we're now
enabling the mbox's irq only after its notifier_block is registered,
to avoid possible race of receiving an interrupt without invoking
the user's notifier callback.

Signed-off-by: Juan Gutierrez <jgutierrez@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
[ohad@wizery.com: slightly reworded the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-05-13 16:09:39 +03:00
Timur Tabi
5e7b911f9a drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
The THRESHOLDS register configures thresholds for two interrupts, but
these interrupts are not used in the DIU driver.  An early version of the
driver may have used the "lines before vsync" interrupt, which requires
the LS_BF_VS of THRESHOLDS to be initialized.

Unfortunately, the initialization of this register does not do a
read-modify-write to set only LS_BF_VS.  On the MPC8610, the value
written is correct.  On other chips, like the P1022, the value overwrites
some reserved bits.  This results in a performance drop on the P1022.

Since the default value is acceptable as-is on all SOCs, we should just
avoid touching this register.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:08:56 +00:00
Donghwa Lee
24bb7a6efc video: exynos mipi dsi: support reverse panel type
This patch adds panel_reverse variable to support reversed s6e8ax0 panel
type.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:08:23 +00:00
Sylwester Nawrocki
82a50195cb video: exynos mipi dsi: Properly interpret the interrupt source flags
Rework the interrupt handler so the RX_DONE, FIFO_EMPTY interrupts are
properly detected. This prevents missing the interrupts when there are
other bits set in the INTSRC register than just RX_DONE and FIFO_EMPTY.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:08:23 +00:00
Sylwester Nawrocki
b89e1399ba video: exynos mipi dsi: Avoid races in probe()
Make sure all resources are initialized before interrupt handler is
registered. Pass full platform device name to request_irq() so it
can be distinguished which device has requested an interrupt in cases
there are multiple instances in the system.

Also enable voltage regulators regardless of they have been enabled
by bootloader or not, to make sure other drivers using same regulators
don't disable them unexpectedly.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:08:22 +00:00
Sylwester Nawrocki
3bfc9b835a video: exynos mipi dsi: Do not use deprecated suspend/resume callbacks
Use proper PM ops from struct dev_pm_ops rather than the deprecated ones.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:08:22 +00:00
Kuninori Morimoto
c932b27311 fbdev: sh_mobile_hdmi: add HDMI Control Register support
Latest SuperH HDMI uses not only HDMI Core Register (HTOP0)
but also HDMI Control Register (HTOP1).
This patch adds HDMI Control Register support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:07:59 +00:00
Kuninori Morimoto
db6668d83a fbdev: sh_mobile_hdmi: 32bit register access support
Latest SuperH HDMI allows 32bit access only.
But the data is 8bit. So, we can keep compatibility by switching 8/32 bit access.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:07:59 +00:00
Kuninori Morimoto
e0defc8642 fbdev: sh_mobile_hdmi: add interrupt output option
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:07:59 +00:00
Kuninori Morimoto
3f521abd6c fbdev: sh_mobile_hdmi: add hdmi_bit_set() function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:07:58 +00:00
Donghwa Lee
66685aa00b video: EXYNOS: changes mipi dsi regulator name from vdd10 to vdd11
MIPI DSI uses 1.1v regulator, so change its supply name.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:06:50 +00:00
Jingoo Han
65302e48ce video: s3c-fb: use pr_debug instead of printk
This patch uses pr_debug instead of printk to allow dynamic debugging.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:06:26 +00:00
Jingoo Han
35b37dc4fd video: exynos_dp: remove unnecessary header includes
Remove unnecessary headers from the file.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:05:52 +00:00
Julia Lawall
701d707c64 drivers/video/intelfb/intelfbdrv.c: add missing agp_backend_release
Release bridge, as done on all other paths out of the function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-13 13:05:24 +00:00
Laxman Dewangan
684ae39b91 regulator: tps62360: add dt support
Add dt support for the pmu device tps62360 and
Add binding documentation with example.
With this patch driver will support both device-tree and
non-device tree registration.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 13:47:49 +01:00
Laxman Dewangan
8bdca009e6 regulator: tps62360: make init_data of platform data to pointer.
Convert platform data member regulator_init_data to pointer type.
This will avoid the copy of entire regualator init data into
platform data member when adding dt support and it can be achieve
by simple assignment:
pdata->init_data = of_get_regulator_init_data(dev, dev->of_node);

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 13:47:47 +01:00
Mark Brown
dc2af52c0d Linux 3.4-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPrxCRAAoJEHm+PkMAQRiGQAgH/icr6rDF/e7Y7LoNErjVag94
 +PUhYx851xH3ApPlB1fBaU1ZTvQS2Pb34B8G8WrqWJ+yTs4XfE9sCPj2yb+7ySA8
 vb0vPsErVvAcRWv8sP22NF2ERKNFj/PtSNAcAUJHb5djrRmJcZJ3aw03cdY/INAS
 2OqJEoMc2IBa5Z+WePQJ8N+J2YgDSDdCnpBKNuSHDGN0rBm4suiWY8PWXgTzMAhG
 TNgNrKIlN8bnaX4hPJr6ooN+sxInkUl8ZglAPxwwjVtmYvGch4FiowpDC7BQbSGB
 WFSVsIuv3jMI6VaYDo/NQOFDQqqoK4h7DmBIqbL5eXBRTJg9xW+1A8zloGd4Rks=
 =IWBQ
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc7' into for-3.5

Linux 3.4-rc7

Conflicts):
	drivers/base/regmap/regmap.c         (overlap with bug fixes)
	sound/soc/blackfin/bf5xx-ssm2602.c   (overlap with bug fixes)
2012-05-13 13:32:54 +01:00
Takashi Iwai
d9bbb4756d Merge branch 'topic/hda' into topic/hda-switcheroo 2012-05-13 11:35:44 +02:00
Takashi Iwai
3e9e63dbd3 vga_switcheroo: Add the support for audio clients
Add the support for audio clients to VGA-switcheroo for handling the
HDMI audio controller together with VGA switching.  The id of the
audio controller should be given explicitly at registration time
unlike the video controller.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43155

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-13 11:27:21 +02:00
Takashi Iwai
26ec685ff9 vga_switcheroo: Introduce struct vga_switcheroo_client_ops
This changes the API as a clean-up.  Instead of passing multiple
function pointers at each time, introduce a new struct holding the
whole callback functions and pass it to the registration.

The same struct will be used for the upcoming audio client
registration, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-13 11:24:09 +02:00
Takashi Iwai
79721e0a91 vga_switcheroo: Refactor using linked list
Refactor the code base a bit for the further work to adapt more clients.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-13 11:21:56 +02:00
Olof Johansson
e29402edf8 Merge branch 'mxs/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt2
* 'mxs/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (51 commits)
  ARM: dts: enable audio support for imx28-evk
  ARM: dts: enable i2c device for imx28-evk
  i2c: mxs: add device tree probe support
  ARM: dts: enable mmc for imx28-evk
  ARM: dts: enable mmc for imx23-evk
  mmc: mxs-mmc: add device tree support
  mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host
  mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host
  mmc: mxs-mmc: use devm_* helper to make cleanup simpler
  mmc: mxs-mmc: move header from mach into linux folder
  mmc: mxs-mmc: get rid of the use of cpu_is_xxx
  mmc: mxs-mmc: let ssp_is_old take host as parameter
  mmc: mxs-mmc: use global stmp_device functionality
  ARM: mxs: add gpio support for device tree boot
  gpio/mxs: add device tree probe
  gpio/mxs: get rid of the use of cpu_is_xxx
  gpio/mxs: use devm_* helpers to make error handling simple
  ARM: mxs: add mxs-dma dt support
  ARM: mxs: do not add dma device by default
  dma: mxs-dma: add device tree probe support
  ...
2012-05-12 22:33:24 -07:00
Olof Johansson
68f4c319d6 Merge branch 'next/cleanup-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
From Kukjin Kim:
"Mostly it is using common macro to define resources and clean up useless codes."

* 'next/cleanup-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (34 commits)
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ARM: S3C64XX: Use common macro to define resources on mach-smdk6410.c
  ARM: S3C64XX: Use common macro to define resources on mach-real6410.c
  ARM: S3C64XX: Use common macro to define resources on mach-mini6410.c
  ARM: S3C64XX: Use common macro to define resources on mach-crag6410.c
  ARM: S3C64XX: Use common macro to define resources on mach-anw6410.c
  ARM: S3C64XX: Use common macro to define resources on dev-uart.c
  ARM: S3C64XX: Use common macro to define resources on dev-audio.c
  ARM: S3C24XX: Use common macro to define resources on simtec-nor.c
  ARM: S3C24XX: Use common macro to define resources on mach-vr1000.c
  ARM: S3C24XX: Use common macro to define resources on mach-tct_hammer.c
  ARM: S3C24XX: Use common macro to define resources on mach-rx1950.c
  ARM: S3C24XX: Use common macro to define resources on mach-otom.c
  ARM: S3C24XX: Use common macro to define resources on mach-nexcoder.c
  ...
2012-05-12 22:17:15 -07:00
Olof Johansson
81f96172d6 Merge branch 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards
* 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
  ARM: mach-shmobile: bonito: make sure static function
  ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 images
  ARM: mach-shmobile: mackerel: Add FSI DMAEngine support
2012-05-12 21:22:28 -07:00
Joe Perches
e550ba1af9 etherdevice: Remove now unused compare_ether_addr_64bits
Move and invert the logic from the otherwise unused
compare_ether_addr_64bits to ether_addr_equal_64bits.

Neaten the logic in is_etherdev_addr.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12 23:34:50 -04:00
Olof Johansson
7af07ad902 ux500 GPIO and pinctrl changes for kernel 3.5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPrioxAAoJEEEQszewGV1zpPkP/1nMK0LMo8sy7ScnCCumNils
 ZiWgB8pViyfl5gLggOwldI/ILVzXTbR6pJZAJNoU3Tbu7n96UyA2QCdeBn/JKCbY
 Yr0I/8uT0hXlh4QVrCgyVKQt2e05rP2mt8vtP1CoFad0R56RfwZ9U9u9S2kx5DnY
 oKXeg/sjxURueMPYQuvZVZBdLJ+82rsBNVXukKb2h2gY8ntMm6CBLUgk/oHBpPrM
 CWaNBT0llBwwWhsmrErYZ7Sb7nRRGDL2rf6kKrw1UPwZ5FIefS+RHaudRic/AiGD
 DfVGh22hpv0WFQ6ruEayA1JfoYS0IKsvGBn8Ywf+2tz9uteED6rXJ+fOF6FayR6y
 NarGmCFUoQauh5ZSK8h7nv0oNlRFgb3OFp/FfLZC9N+jCWJVVbtbLD9X+M5wN6aE
 lUjQwVbiA7q7ZTYs12X/zzBjrQj+ZrV5IXZLq+dvZ1HKBh4FLSpXaZocOCP0n0f1
 N4VkGgIngWeiQDDJqc11mZ3ueD/p2AsWsxLRAEafL5CaIk+vz9JXcF3gYDt57Oph
 WjPOWXTHiRxb1W4OfgvKWtZbxJdqECJ8HnWUbpTjiG0/MK8Tfprk8iSEOqS2tM1B
 usBXBLk8I4P2RwGgIcsnuJ1gEEsZzjSbvpxf2VKVvdP86qw7LizYrEjXKvjnq4G/
 nGSTZ3F3/53x2mFEihpM
 =xjdL
 -----END PGP SIGNATURE-----

Merge tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/pinctrl

ux500 GPIO and pinctrl changes for kernel 3.5

* tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: switch MSP to using pinctrl for pins
  ARM: ux500: alter MSP registration to return a device pointer
  ARM: ux500: switch to using pinctrl for uart0
  ARM: ux500: delete custom pin control system
  ARM: ux500: switch over to Nomadik pinctrl driver
  pinctrl: add sleep state definition
  pinctrl/nomadik: implement pin configuration
  pinctrl/nomadik: implement pin multiplexing
  pinctrl/nomadik: reuse GPIO debug function for pins
  pinctrl/nomadik: break out single GPIO debug function
  pinctrl/nomadik: basic Nomadik pinctrl interface
  pinctrl/nomadik: !CONFIG_OF build error
  gpio: move the Nomadik GPIO driver to pinctrl

Context conflicts resolved in drivers/pinctrl/Kconfig and
drivers/pinctrl/Makefile.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-12 19:57:34 -07:00
Linus Torvalds
36be50515f Linux 3.4-rc7 v3.4-rc7
.. and this should hopefully be the last -rc before final 3.4 release.
2012-05-12 18:37:47 -07:00
Shawn Guo
530f1d4160 ARM: dts: enable audio support for imx28-evk
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13 08:27:47 +08:00
Shawn Guo
2a96e3912b ARM: dts: enable i2c device for imx28-evk
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13 08:27:45 +08:00
Shawn Guo
b237866848 i2c: mxs: add device tree probe support
Add device tree probe support for i2c-mxs driver.  So far, it's only
been tested on imx28.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-13 08:27:44 +08:00
Shawn Guo
35d23047f8 ARM: dts: enable mmc for imx28-evk
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13 08:27:43 +08:00
Linus Torvalds
5889fc3217 ARM: SoC fixes for 3.4-rc
I was hoping to be done with fixes for 3.4 but we got two branches from
 subarch maintainers the last couple of days. So here is one last(?) pull
 request for arm-soc containing 7 patches:
 
 - 5 of them are for shmobile dealing with SMP setup and compile failures
 - The remaining two are for regressions on the Samsung platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIbBAABAgAGBQJPrufxAAoJEIwa5zzehBx3m2EP+PPYlaO43Oiafz08W9/hTyGY
 yKBjC5LyD3MxcQ/7nA3N0YUpOL4wpB+8J3/bZhsos0V9KoQkDYcT3QliQy1yLDaq
 0FfwA+5V8r98pIPK4aforeE4ZqfkLmDD1psxLovE7YChpDZsDnNiIxBejH1hcF89
 aklXiz1egDDekYNZhPC1n/+IRc0s49cfGaL94/BbNxNw4/H02NmslLN8K51D8nXU
 6g6wCOoL/vcFvE5vW4bxfmz5DfA/Li8sz8ayzomrUIy43JqEuclcFl3XYsq4OKRV
 va5XSdutvFojgWexZd4MJo21Vlb+dMk5RuEeLDbf93saNZfzoccSNilkDKwEC0aL
 vdZ7sIuYHs5yMNJo4LQmYTl9cAIlEKu4fmDYuZXgnsb3YVLxn7wxxQiDNN0HTH9o
 4CcGu/Io1jLDWL2u9AIAizb4YC2Red3xjGmK8cpjY9QMo9GyCbVvrkKyrhNWLtMU
 5U1ZpfgoZck02unWLkl7YrV9l0BbQ5WIJQ3ScNHQsMxpzWz8X2BuyNr7lwWghc94
 JPnKJo1cpN/HHKu5pzidp+/1KrBjZqeIFfbre6AVr+BqweIaLdXriv8CtCx5/WxE
 /bXVbMQYH+A4SB6diiyQkgktfpIJt4WVexYEkudMLUh2F0/LkAnBh4WDWOabBIl/
 X4E5jrTtDwPYRtWu2Oo=
 =Q2un
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM: SoC fixes from Olof Johansson:
 "I was hoping to be done with fixes for 3.4 but we got two branches
  from subarch maintainers the last couple of days.  So here is one
  last(?) pull request for arm-soc containing 7 patches:

   - Five of them are for shmobile dealing with SMP setup and compile
     failures
   - The remaining two are for regressions on the Samsung platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
  ARM: EXYNOS: use s5p-timer for UniversalC210 board
  ARM / mach-shmobile: Invalidate caches when booting secondary cores
  ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
  ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
  ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
  ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12 17:27:41 -07:00
Shawn Guo
be1ce30869 ARM: dts: enable mmc for imx23-evk
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-13 08:27:40 +08:00
Shawn Guo
6de4d817aa mmc: mxs-mmc: add device tree support
It adds device tree probe support for mxs-mmc driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:27:37 +08:00
Linus Torvalds
1bc4a5be0a GPIO bug fixes on top of v3.4-rc6
An OMAP bug fix, a set of PCH bug fixes, and one patch to fix up compile
 warnings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPra+FAAoJEEFnBt12D9kBW3oQALDLW0bneFl+sysynzu9qOAu
 Qy4BmQjNalPHoZ3PZ6Q5CevrTXJsDwFxkKAS+29melBrPaKpubTPMoqD9yaTjizU
 yH2MClTLIfOXOQTDwYyILeCq5jcw7uRAyx73cHzAD/JBCTkUgv8HoLKCbhZN4wo5
 s/KqZRCEpee8rLHhQa7DFUuJVH7L9zskO2ZwpxgMGOAkDH4aB7OHzlcndB6jST4f
 dFkMva50pQ8iggCu9tX/zmGbPXWKroSswnrdZVBOEKIj3QJq6h2B9s0u64B4ergZ
 W57xnCF6AmPWp8YvenMruQRLUUy3KQIMZV5d8fIjvYXpH9TQJE4PR9IWjt+PADqy
 TVoVR4tjcdYWFJuYhskpvT5dq/x2AX9eyNsTgu9ob8HyUQgzbcTu9zczUF52SiyN
 ohqjrbKmPINnUrLD1gUkUmUayWt5SOt+hu19rMijqKY/HWQn2rzK5mUIreZeG/Cb
 aPY1acunbdaNTsIgmIBqLkfSl/ErCYcXwmkulBIZOyUitaMYnZyhbZmgTIeEebTY
 2ffX658MTT9cWlHsZ4wfWDynJIpsvTHCVau/oQfurLSO2p6Jb/xA7k34v9mxfAaK
 gESiK+8T8n0u9RetLSSk7uKNyTqRvDaWsbaB7As0mAd1r8ETAL98N2ZzBv5o+bmF
 JH4g4IgKNdowY4EqA0Ms
 =P8v+
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull a few more GPIO bug fixes from Grant Likely:
 "Oops, missed a couple.  Here's an updated pull req for GPIO"

A set of PCH bug fixes, and one patch to fix up compile warnings

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/exynos: Fix compiler warnings when non-exynos machines are selected
  gpio: pch9: Use proper flow type handlers
2012-05-12 17:24:29 -07:00
Shawn Guo
31b0ff5e73 mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host
Copy wp_gpio from platform_data into struct mxs_mmc_host, so that
the use of platform_data can be limited in probe function, which
will ease the device tree probe.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:58 +08:00
Shawn Guo
b60188c820 mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host
It replaces dma_res with dma_channel in struct mxs_mmc_host, so that
the device tree support will be a little easier, since dma channel
can not be retrieved from "struct resource *dma_res".

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:51 +08:00
Shawn Guo
df06bfc724 mmc: mxs-mmc: use devm_* helper to make cleanup simpler
Use devm_request_and_ioremap and devm_request_irq helpers to clean up
the code a little bit.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:45 +08:00
Shawn Guo
81f38ee8e6 mmc: mxs-mmc: move header from mach into linux folder
Rename arch/arm/mach-mxs/include/mach/mmc.h to
include/linux/mmc/mxs-mmc.h, so that mxs-mmc driver becomes
<mach/*> inclusion free.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:38 +08:00
Shawn Guo
ef9b4d3996 mmc: mxs-mmc: get rid of the use of cpu_is_xxx
The register HW_SSP_VERSION is broken for ssp version detection,
as the address of the register is different between imx23 and imx28.
Let's use platform_device_id to detect the device, so that the use
of cpu_is_xxx can be removed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:31 +08:00
Shawn Guo
e0bf141db2 mmc: mxs-mmc: let ssp_is_old take host as parameter
Let macro ssp_is_old take host as parameter to make the code easy
to read.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:25 +08:00
Shawn Guo
70e6020688 mmc: mxs-mmc: use global stmp_device functionality
Use global stmp_device functionality to reduce mach-dependency.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
2012-05-13 08:05:07 +08:00
Boojin Kim
20ef9e08d2 ARM: EXYNOS: Support DMA for EXYNOS5250 SoC
mach-exynos/dma.c is updated to support both exynos4 and exynos5.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13 08:20:04 +09:00
Kukjin Kim
163ec0369b Merge branch 'next/cleanup-plat-s3c24xx' into next/cleanup-plat-s3c24xx-s5p 2012-05-13 07:53:34 +09:00
Kukjin Kim
199642bfe1 ARM: SAMSUNG: merge plat-s5p into plat-samsung
Since just plat-samsung can support all of Samsung stuff so
that there is no more need to keep the plat-s5p for S5P SoCs.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13 07:52:54 +09:00
Olof Johansson
85d5c4a362 Merge branch 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
* 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
  ARM: EXYNOS: use s5p-timer for UniversalC210 board
2012-05-12 15:41:22 -07:00
Kukjin Kim
28b874a8ba ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13 08:31:53 +09:00
Marek Szyprowski
fd717cd7c9 ARM: EXYNOS: use s5p-timer for UniversalC210 board
Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using
ARM private timers") removed support for local timers and forced
to use MCT as event source. However MCT is not operating properly
on early revision of EXYNOS4 SoCs. All UniversalC210 boards are
based on it, so that commit broke support for it. This patch
provides a workaround that enables UniversalC210 boards to boot
again. s5p-timer is used as an event source, it works only for
non-SMP builds.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13 08:31:52 +09:00
Olof Johansson
d2919c651e Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes
By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki:
"[...] urgent fixes for Renesas ARM-based platforms.  Four of these
commits are fixes of regressions new in 3.4-rc and the last one is
necessary for SMP to work on those systems in general."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
  ARM / mach-shmobile: Invalidate caches when booting secondary cores
  ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
  ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
  ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
  ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12 15:40:56 -07:00
David S. Miller
5471fa6265 sparc32: Pass -mcpu=v7 explicitly to gcc.
We should be agnostic to what gcc happens to be generating by default.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12 15:16:45 -07:00