Commit graph

336,024 commits

Author SHA1 Message Date
Marc Zyngier
0a68214b76 ARM: DT: Add binding for GIC virtualization extentions (VGIC)
The GICv2 can have virtualization extension support, consisting
of an additional set of registers and interrupts. Add the necessary
binding to the GIC DT documentation.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-11 09:15:02 -06:00
Arnd Bergmann
ea01d31a07 ARM i.MX common clock framework support
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJPqhc/AAoJEPFlmONMx+ezI00P/0Jct7r8GcEO2sPWalEcI5AZ
 ook3Wfcg0KpiUv6+Kkcq49coo+CR8IhFKNrtPDB5HUQHXGSZbQkybdpUB6rdsSjO
 ZaxxfVged9xZLIv6fxA2yuIzjmAQuIm4+3E+VbyYww3LHqEnENZklrN2pvjz00Z0
 Qvwz8ro29dwxNvHT/XayPm4i7jDzr4SqZC7TYJA/7/aBg8v+ewrzYj7LllYmKa3+
 yz1DAE0XabFyAoFiEBGRvSeSrJoNpgBXY5/vMtTWxfCkKNzeJwXy6g5UGUyNYxTM
 xYY2fElBo5YVLzNiEwA5k2ltDB/Ycz1bPv+lBc0n38zj61H31CjSv7bZYGr4wYNY
 m47ZvwmJBMGah58NIgu82/vN9y+5ZpbB7zO/zxkal5tFEjQ41VW2rRy8XQlnD1os
 8PCKYE4oqZCwrPCf24gMQnMAPRGPX8kUG6v62P/zkqt8V/XNaZWarI9xLhWsC2TV
 yx2U/eMG/6QYls5zYOHXIihsVEyZq43I6eO3wt4yIbwBLyDUveE9W4x0HBayoni6
 NOojOToMC/5Dh1cDDh/R2N35DHa14DthsmjQWxMcWL/R5vV1m7ekIVu4bjod5bKr
 rhea+6lU1HZ+jqBzNqEsS5idLI/UejefcFz6s2BkeS9j2ppJYiAd8ICWeG76kfVl
 Do9z2LODvSokf7oJKhfN
 =ca9P
 -----END PGP SIGNATURE-----

Merge tag 'imx-common-clk' of git://git.pengutronix.de/git/imx/linux-2.6 into next/clock

Sascha Hauer <s.hauer@pengutronix.de> writes:

 ARM i.MX common clock framework support

 Same as with Shawns series this one depends on:
   git://git.linaro.org/people/mturquette/linux.git clk-next
   http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev

* tag 'imx-common-clk' of git://git.pengutronix.de/git/imx/linux-2.6: (34 commits)
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM i.MX31: implement clocks using common clock framework
  ARM i.MX27: implement clocks using common clock framework
  ARM i.MX21: implement clocks using common clock framework
  ARM i.MX1: implement clocks using common clock framework
  ARM i.MX25: implement clocks using common clock framework
  ARM: imx: add common clock support for clk busy
  ARM: imx: add common clock support for pfd
  ARM i.MX: Add common clock support for 2bit gate
  ARM: imx: add common clock support for pllv3
  ARM i.MX: Add common clock support for pllv2
  ARM i.MX: Add common clock support for pllv1
  ARM i.MX: prepare for common clock framework
  ARM i.MX3: Make ccm base address a variable
  ARM i.MX timer: request correct clock
  ARM i.MX5: prepare gpc_dvfs_clk
  rtc: imx dryice: Add missing clk_prepare
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11 17:13:33 +02:00
Arnd Bergmann
e12ff34402 Merge branch 'depends/rmk/clkdev' into next/clock
* depends/rmk/clkdev:
  CLKDEV: provide helpers for common clock framework
  ARM: 7392/1: CLKDEV: Optimize clk_find()
  ARM: 7376/1: clkdev: Implement managed clk_get()
2012-05-11 17:13:00 +02:00
Dan Carpenter
a25c75d5ad Btrfs: cleanup: use consistent lock naming
It confuses Smatch that we use two names for the same lock.  Plus the
shorter name is nicer.  This doesn't change how the code works, it's
just a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2012-05-11 10:56:41 -04:00
Stefan Behrens
e06baab418 Btrfs: change integrity checker to support big blocks
The integrity checker used to be coded for nodesize == leafsize ==
sectorsize == PAGE_CACHE_SIZE.
This is now changed to support sizes for nodesize and leafsize which are
N * PAGE_CACHE_SIZE.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-11 10:56:40 -04:00
Wang Sheng-Hui
fd5e62a37c Btrfs: remove the useless assignment to *entry in function tree_insert of file extent_io.c
In tree_insert, var *entry is used in the loop only, and is useless
out of the loop. Remove the useless assignment after the loop.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
2012-05-11 10:56:40 -04:00
Wang Sheng-Hui
477d7eafa9 Btrfs: fix the comment for find_first_extent_bit
The return value of find_first_extent_bit is 1 or 0, no < 0.
And if found something, return 0; if nothing was found, return 1.
Fix the comment.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
2012-05-11 10:56:39 -04:00
Wang Sheng-Hui
39bab87ba6 Btrfs: fix btrfs_release_extent_buffer_page with the right usage of num_extent_pages
num_extent_pages returns the number of pages in the specific range, not
the index of the last page in the eb range.

btrfs_release_extent_buffer_page is called with start_idx set 0 in current
codes, so it's not a problem yet. But the logic is indeed wrong.

Fix it here.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
2012-05-11 10:56:38 -04:00
Wang Sheng-Hui
1b303fc054 Btrfs: cleanup the comment for clear_state_bit in extent_io.c
No 'delete' arg is used for clear_state_bit.
Cleanup the comment.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
2012-05-11 10:56:38 -04:00
Wang Sheng-Hui
f775738f6f btrfs/ctree.c: remove the unnecessary 'return -1;' at the end of bin_search
The code path should not reach there. Remove it.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
2012-05-11 10:56:37 -04:00
Bernd Schubert
f908ee9463 bio allocation failure due to bio_get_nr_vecs()
The number of bio_get_nr_vecs() is passed down via bio_alloc() to
bvec_alloc_bs(), which fails the bio allocation if
nr_iovecs > BIO_MAX_PAGES. For the underlying caller this causes an
unexpected bio allocation failure.
Limiting to queue_max_segments() is not sufficient, as max_segments
also might be very large.

bvec_alloc_bs(gfp_mask, nr_iovecs, ) => NULL when nr_iovecs  > BIO_MAX_PAGES
bio_alloc_bioset(gfp_mask, nr_iovecs, ...)
bio_alloc(GFP_NOIO, nvecs)
xfs_alloc_ioend_bio()

Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 16:45:12 +02:00
Jeff Moyer
080399aaaf block: don't mark buffers beyond end of disk as mapped
Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

Squashfs manages to read in the end block(s) of the disk during the
mount operation.  Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped.  Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above.  I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>

--

Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 16:42:14 +02:00
Asai Thambi S P
a09ba13eef mtip32xx: release the semaphore on an error path
Release the semaphore in an error path in mtip_hw_get_scatterlist(). This
fixes the smatch warning inconsistent returns.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 16:42:14 +02:00
Jesper Juhl
d88a440edd dac960: Remove unused variables from DAC960_CreateProcEntries()
The variables 'StatusProcEntry' and 'UserCommandProcEntry' are
assigned to once and then never used. This patch gets rid of the
variables.

While I was there I also fixed the indentation of the function to use
tabs rather than spaces for the lines that did not already do so.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 16:42:14 +02:00
Arnd Bergmann
bef9459658 Merge branch 'depends/clk/clk-next' into next/clock
Mike Turquette <mturquette@ti.com> has asked me to take the clock
changes through the arm-soc tree while there are still so many
inderdependencies, so this is the entire branch.

* depends/clk/clk-next: (30 commits)
  clk: add a fixed factor clock
  clk: mux: assign init data
  clk: remove COMMON_CLK_DISABLE_UNUSED
  clk: prevent spurious parent rate propagation
  MAINTAINERS: add entry for common clk framework
  clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabled
  clk: Use a separate struct for holding init data.
  clk: constify parent name arrays in macros
  clk: remove trailing whitespace from clk.h
  clk: select CLKDEV_LOOKUP for COMMON_CLK
  clk: Don't set clk->new_rate twice
  clk: clk-private: Add DEFINE_CLK macro
  clk: clk-gate: Create clk_gate_endisable()
  clk: Fix typo in comment
  clk: propagate round_rate for CLK_SET_RATE_PARENT case
  clk: pass parent_rate into .set_rate
  clk: always pass parent_rate into .round_rate
  clk: basic: improve parent_names & return errors
  clk: core: copy parent_names & return error codes
  clk: Constify parent name arrays
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11 16:34:55 +02:00
Jonathan Nieder
44d27f7dfe HID: logitech: read all 32 bits of report type bitfield
On big-endian systems (e.g., Apple PowerBook), trying to use a
logitech wireless mouse with the Logitech Unifying Receiver does not
work with v3.2 and later kernels.  The device doesn't show up in
/dev/input.  Older kernels work fine.

That is because the new hid-logitech-dj driver claims the device.  The
device arrival notification appears:

	20 00 41 02 00 00 00 00 00 00 00 00 00 00 00

and we read the report_types bitfield (02 00 00 00) to find out what
kind of device it is.  Unfortunately the driver only reads the first 8
bits and treats that value as a 32-bit little-endian number, so on a
powerpc the report type seems to be 0x02000000 and is not recognized.

Even on little-endian machines, connecting a media center remote
control (report type 00 01 00 00) with this driver loaded would
presumably fail for the same reason.

Fix both problems by using get_unaligned_le32() to read all four
bytes, which is a little clearer anyway.  After this change, the
wireless mouse works on Hugo's PowerBook again.

Based on a patch by Nestor Lopez Casado.
Addresses http://bugs.debian.org/671292

Reported-by: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar>
Inspired-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11 16:31:21 +02:00
Arnd Bergmann
86822f816f Merge branch 'clps711x/cleanup' into next/cleanup
A single patch from Alexander Shiyan <shc_work@mail.ru>:

* clps711x/cleanup:
  ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11 16:18:22 +02:00
Alexander Shiyan
304b2c684e ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset
Using a single definition for the physical and virtual address register for all
variants boards clps711x. This patch also includes the use of a single function
clps_read/write in some units.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11 16:18:01 +02:00
Przemo Firszt
d13f5454e4 HID: wacom: Add LED selector control for Wacom Intuos4 WL
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4
different LEDs on the tablet and they can be turned on by something like:

echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness

Only one can be lit at a time. The brightness range is 0 to 127. This patch
also contains short ABI description.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11 14:47:04 +02:00
Tomi Valkeinen
037983e61b Merge branch 'omapdss-hdmi-audio'
Merge OMAP DSS HDMI audio patches from Ricardo Neri
2012-05-11 15:38:23 +03:00
Ricardo Neri
f3a97491f2 OMAPDSS: HDMI: Implement DSS driver interface for audio
Implement the DSS device driver audio support interface in the HDMI
panel driver and generic driver. The implementation relies on the
IP-specific functions that are defined at DSS probe time.

A mixed locking strategy is used. The panel's mutex is used when
the state of the panel is queried as required by the audio functions.
The audio state is protected using a spinlock as users of DSS HDMI
audio functionality might start/stop audio while holding a spinlock.
The mutex and the spinlock are held and released as needed by each
individual function to protect the panel state and the audio state.

Although the panel's audio_start functions does not check whether
the panel is active, the audio _ENABLED state can be reached only
from audio_enable, which does check the state of the panel. Also,
if the panel is ever disabled, the audio state will transition
to _DISABLED. Transitions are always protected by the audio lock.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:17:10 +03:00
Ricardo Neri
b7dea05aec OMAPDSS: HDMI: Panel: Simplify the name of the HDMI mutex
As the hdmi_lock mutex is inside the hdmi struct, rename to simply
"lock". This is only a change in the name. There are not changes
in functionality.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:17:09 +03:00
Ricardo Neri
24ccfc5541 OMAPDSS: HDMI: OMAP4: Remap speaker order to match ALSA order
As of today, the only know user of the DSS HDMI audio support is
ASoC. Hence, it makes sense to remap the speaker order to match
the ALSA speaker order. In the future, a dynamic mapping mechanism
may be implemented.

Remapping is needed as the HDMI speaker order is FL/FR/LFE/C/RL/RR/
RLC-FLC/RRC-FLC while the ALSA order is FL/FR/RL/RR/C/LFE/SL/SR.
Refer to CEA-861 Section 6.6.2 for further details.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:17:09 +03:00
Ricardo Neri
6ec355d6c7 OMAPDSS: HDMI: Add an audio configuration function
The generic HDMI driver does not need to know about the specific
settings of a given IP. Hence, it just passes the audio configuration
and the IP library parses such configuration and sets the IP
accordingly. This patch introduces an IP-specific audio configuration
function.

Also, this patch implements the audio config function for OMAP4. The
DMA, format and core config functions are no longer exposed to the
generic HDMI driver as they are IP-specific.

The audio configuration function caters for 16-bit through 24-bit
audio samples with sample rates from 32kHz and up to 192kHz as well
as up to 8 audio channels.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:17:08 +03:00
Ricardo Neri
25a653597e OMAPDSS: HDMI: Add support for more audio sample rates in N/CTS calculation
Add support for more sample rates when calculating N and CTS. This
covers all the audio sample rates that an HDMI source is allowed
to transmit according to the HDMI 1.4a specification.

Also, reorganize the logic for the calculation when using deep color.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:17:08 +03:00
Ricardo Neri
35547626f3 OMAPDSS: HDMI: Relocate N/CTS calculation
The N and CTS parameters are relevant to all HDMI implementations and
not specific to a given IP. Hence, the calculation is relocated
into the generic HDMI driver.

Also, deep color is not queried but it is still considered in the
calculation of N. This is to be changed when deep color functionality is
implemented in the driver.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:17:06 +03:00
Ricardo Neri
c1164ed87e OMAPDSS: HDMI: OMAP4: Expand configuration for IEC-60958 audio
Utilize a snd_aes_iec958 struct to write the parameters of the IEC-60958
channel status word into the HDMI IP registers. Hence, the user of the
driver has full control of what parameters are written in the word.

Also, some of the parameters of the I2S structure have been removed
as they are actually IEC-60958 parameters.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:15:23 +03:00
Ricardo Neri
7e151f7f6a OMAPDSS: HDMI: Decouple HDMI audio from ASoC
Instead of having OMAPDSS HDMI audio functionality depending on the
ASoC HDMI audio driver, use a new config option so that
potential users, including ASoC, may select if needed.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:15:22 +03:00
Axel Castaneda Gonzalez
3df9fb5c51 OMAPDSS: HDMI: Decouple wrapper enable/disable and audio start/stop
Decouple the enable/disable operation of the HDMI audio wrapper from
audio start/stop. Otherwise, an audio FIFO underflow may occur. The
audio wrapper enablement must be done after configuration and
before audio playback is started.

Signed-off-by: Axel Castaneda Gonzalez <x0055901@ti.com>
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:15:22 +03:00
Ricardo Neri
7c92af1678 OMAPDSS: HDMI: OMAP4: Remove invalid I2S settings
According to the most up-to-date documentation from Texas Instruments,
the configuration of High Bitrate Audio is not possible. Also, it is
not possible to set polarity of the I2S Word Select signal. This patch
removes the invalid settings.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:15:21 +03:00
Ricardo Neri
199e7fd621 OMAPDSS: HDMI: OMAP4: Remove CEA-861 audio infoframe and IEC-60958 enums
Instead of having its own definitions for CEA-861 and IEC-60958, the HDMI
driver should use those provided by ALSA. This patch removes the definitions
that are already provided by ALSA.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:15:21 +03:00
Ricardo Neri
7c3291f06b OMAPDSS: HDMI: Remove ASoC codec
Remove the ASoC OMAP HDMI audio codec. The goal of removing the codec
is to, in subsequent patches, give way to the implementation of the HDMI
audio support using the DSS device driver audio interface. This
approach will expose the HDMI audio functionality to any interested entity.

In a separate patch, ASoC will use this new approach to expose HDMI audio
to ALSA.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:15:18 +03:00
Ricardo Neri
c0456be38f OMAPDSS: HDMI: Split video_enable into video_enable/disable
To improve readability, split the video_enable HDMI IP operation
into two separate functions for enabling and disabling video.
The video_enable function is also modified to return an error value.

While there, update these operations for the OMAP4 IP accordingly.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:13:51 +03:00
Ricardo Neri
027bdc85ee OMAPDSS: HDMI: Split audio_enable into audio_enable/disable
To improve readability, split the audio_enable HDMI IP operation
into two separate functions for enabling and disabling audio.
The audio_enable function is also modified to return an error value.

While there, update these operations for the OMAP4 IP accordingly.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:13:50 +03:00
Ricardo Neri
9c0b842036 OMAPDSS: Provide an interface for audio support
There exist several display technologies and standards that support audio as
well. Hence, it is relevant to update the DSS device driver to provide an audio
interface that may be used by an audio driver or any other driver interested in
the functionality.

The audio_enable function is intended to prepare the relevant
IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
some IP, enabling companion chips, etc). It is intended to be called before
audio_start. The audio_disable function performs the reverse operation and is
intended to be called after audio_stop.

While a given DSS device driver may support audio, it is possible that for
certain configurations audio is not supported (e.g., an HDMI display using a
VESA video timing). The audio_supported function is intended to query whether
the current configuration of the display supports audio.

The audio_config function is intended to configure all the relevant audio
parameters of the display. In order to make the function independent of any
specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
is to contain all the required parameters for audio configuration. At the
moment, such structure contains pointers to IEC-60958 channel status word and
CEA-861 audio infoframe structures. This should be enough to support HDMI and
DisplayPort, as both are based on CEA-861 and IEC-60958. The omap_dss_audio
structure may be extended in the future if required.

The audio_enable/disable, audio_config and audio_supported functions could be
implemented as functions that may sleep. Hence, they should not be called
while holding a spinlock or a readlock.

The audio_start/audio_stop function is intended to effectively start/stop audio
playback after the configuration has taken place. These functions are designed
to be used in an atomic context. Hence, audio_start should return quickly and be
called only after all the needed resources for audio playback (audio FIFOs,
DMA channels, companion chips, etc) have been enabled to begin data transfers.
audio_stop is designed to only stop the audio transfers. The resources used
for playback are released using audio_disable.

A new enum omap_dss_audio_state is introduced to help the implementations of
the interface to keep track of the audio state. The initial state is _DISABLED;
then, the state transitions to _CONFIGURED, and then, when it is ready to
play audio, to _ENABLED. The state _PLAYING is used when the audio is being
rendered.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
2012-05-11 15:13:50 +03:00
Tomi Valkeinen
38137c8f0c Merge branch 'dss-devtree-cleanup'
Merge OMAP DSS cleanups that restructure the omapdss driver to facilitate
implementing device tree support in the future.
2012-05-11 15:10:10 +03:00
Russ Dill
af461d64e1 OMAPDSS: TFP410: use gpio_set_value_cansleep
The Beagleboard xM gpio used for TFP410 powerdown is connected through
an I2C attached chip which means setting the GPIO can sleep. Code that
calls tfp410_power_on/off holds a mutex, so sleeping should be fine.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 15:09:29 +03:00
Tomi Valkeinen
38f3daf678 OMAPDSS: separate pdata based initialization
Move the platform-data based display device initialization into a
separate function, so that we may later add of-based initialization.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 15:09:24 +03:00
Antonio Quartulli
35c133a000 batman-adv: add contributor name
translation_table.{c,h} have been heavily modified by another contributor and
for legal purposes it is better to include his name into the contributor list

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:56:08 +02:00
Antonio Quartulli
c64703aace batman-adv: update copyright years
update copyright years in order to include 2012

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:56:07 +02:00
Marek Lindner
fefa532971 batman-adv: fix checkpatch string complaint
Regression introduced by: f76d019194e0a88c57371df169ecc979690a04c2

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:56:06 +02:00
Marek Lindner
13b2541b11 batman-adv: avoid temporary routing loops by being strict on forwarded OGMs
batman-adv would forward OGMs from non-besthops while replacing the the TQ
and TTL values with the values from the best hop. In certain corner cases
this leads to a temporary routing loop.
This patch changes this behavior: Only packets from best next hops are
forwarded - TQ and TTL values won't be replaced anymore. However, the protocol
needs to rebroadcast OGMs from single hop neighbors regardless of whether or
not they are the best hop. To handle this case a new flag is introduced to
alert neighboring nodes about the forwarded OGM that is not from my best
next hop. It is to be discarded by all nodes except for the one originating
the OGM.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Daniele Furlan <daniele.furlan@gmail.com>
Tested-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2012-05-11 13:56:05 +02:00
Linus Luessing
9d853f6246 batman-adv: Adding hard_iface specific sysfs wrapper macros for UINT
This allows us to easily add a sysfs parameter for an unsigned int
later, which is not for a batman mesh interface (e.g. bat0), but for a
common interface instead. It allows reading and writing an atomic_t in
hard_iface (instead of bat_priv compared to the mesh variant).

Developed by Linus during a 6 months trainee study period in Ascom
(Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-05-11 13:56:03 +02:00
Marek Lindner
f245c38ba7 batman-adv: rename sysfs macros to reflect the soft-interface dependency
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:56:02 +02:00
Marek Lindner
c32293983d batman-adv: refactoring API: find generalized name for bat_ogm_update_mac callback
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:56:01 +02:00
Marek Lindner
edbf12ba56 batman-adv: ignore protocol packets if the interface did not enable this protocol
Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:55:59 +02:00
Marek Lindner
7ae8b2852f batman-adv: split neigh_new function into generic and batman iv specific parts
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 13:55:57 +02:00
Tomi Valkeinen
11ee960640 OMAPDSS: DSI: improve DSI module id handling
We currently use the id of the dsi platform device (dsidev->id) as the
DSI hardware module ID. This works because we assign the ID manually in
arch/arm/mach-omap2/display.c at boot time.

However, with device tree the platform device IDs are automatically
assigned to an arbitrary number, and we can't use it.

Instead of using dsidev->id during operation, this patch stores the
value of dsidev->id to a private field of the dsi driver at probe(). The
future device tree code can thus set the private field with some other
way.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 14:54:41 +03:00
Tomi Valkeinen
9d8232a77f OMAPDSS: init omap_dss_devices internally
Now that each output driver creates their own display devices, the
output drivers can also initialize those devices.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 14:54:38 +03:00
Tomi Valkeinen
35deca3de6 OMAPDSS: interface drivers register their panel devices
Currently the higher level omapdss platform driver gets the list of
displays in its platform data, and uses that list to create the
omap_dss_device for each display.

With DT, the logical way to do the above is to list the displays under
each individual output, i.e. we'd have "dpi" node, under which we would
have the display that uses DPI. In other words, each output driver
handles the displays that use that particular output.

To make the current code ready for DT, this patch modifies the output
drivers so that each of them creates the display devices which use that
output. However, instead of changing the platform data to suit this
method, each output driver is passed the full list of displays, and the
drivers pick the displays that are meant for them. This allows us to
keep the old platform data, and thus we avoid the need to change the
board files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 14:52:23 +03:00