Commit graph

336,024 commits

Author SHA1 Message Date
Olof Johansson
bd69e27304 Merge branch 'for-3.5/usb-ulpi' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers
By Stephen Warren (30) and others
via Stephen Warren
* 'for-3.5/usb-ulpi' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (7 commits)
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  + depends/pinctrl/mergebase branch

Pinctrl mergebase has a conflict in drivers/pinctrl/core.c that was resolved.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09 23:47:14 -07:00
Paul Mundt
9ea6404691 watchdog: shwdt: Basic clock framework support.
This plugs in basic clock framework support for the watchdog. As it's an
optional MSTP bit, we don't particularly care if a platform has provided
it or not, though a valid clock will need to be available for the more
complex overflow period calculations found on newer parts -- this will be
addressed later.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 15:46:48 +09:00
Olof Johansson
7488185d07 Merge branch 'for-3.5/gpio-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/pinctrl
By Stephen Warren
via Stephen Warren
* 'for-3.5/gpio-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  pinctrl: tegra: error reporting cleanup
  pinctrl: tegra: debugfs enhancements
  pinctrl: tegra: refactor probe handling
  ARM: dt: tegra20: add pinmux to device tree
  ARM: dt: tegra cardhu: add pinmux to device tree
  ARM: tegra: Remove pre-pinctrl pinmux driver
  ARM: tegra: Switch to new pinctrl driver
  gpio: tegra: Hide tegra_gpio_enable/disable()
  ARM: tegra: seaboard: Don't gpio_request() ISL29018_IRQ
  gpio: tegra: configure pins during irq_set_type
  ARM: tegra: Remove VBUS_GPIO handling from board files
  usb: ehci-tegra: Add vbus_gpio to platform data
2012-05-09 23:43:04 -07:00
Olof Johansson
b664ae6ff9 Merge tag 'pinctrl-mergebase-20120418' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next/pinctrl
By Stephen Warren (12) and others
via Linus Walleij
* tag 'pinctrl-mergebase-20120418' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (24 commits)
  pinctrl: show pin name for pingroups in sysfs
  pinctrl: show pin name when request pins
  pinctrl: implement devm_pinctrl_get()/put()
  pinctrl: a minor fix of pin config debug information
  pinctrl: pinconf: fix compilation error if PINCONF is not selected
  pinctrl: allow pctldevs to decode pin config in debugfs
  pinctrl: ifdef CONFIG_DEBUG_FS cleanup
  pinctrl: mark non-EXPERIMENTAL
  pinctrl: tegra: Add complete device tree support
  dt: Document Tegra20/30 pinctrl binding
  dt: Move Tegra20 pin mux binding into new pinctrl directory
  dt: pinctrl: Document device tree binding
  dt: add property iteration helpers
  pinctrl: implement pinctrl deferred probing
  pinctrl: add some error checking for user interfaces
  pinctrl: fix pinmux_check_ops error checking
  pinctrl: replace list_*() with get_*_count()
  pinctrl: mark const init data with __initconst instead of __initdata
  Documentation: pinctrl: add missing spi0_0 grp in example
  pinctrl: fix build when CONFIG_OF && !CONFIG_PINCTRL
  ...

Resolved conflicts in drivers/pinctrl/core.c due to same patch being
applied in two branches.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09 23:42:14 -07:00
Olof Johansson
a72ce69097 Merge branch 'for-3.5/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
By Arnd Bergmann (1) and Danny Kukawka (1)
via Stephen Warren
* 'for-3.5/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: do not hide dma declarations
  ARM: tegra: fix multiple asm/hardware/gic.h inclusion

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09 23:26:20 -07:00
Olof Johansson
bdbaaf1ac7 Merge branch 'for-3.5/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/fixes
By Stephen Warren
via Stephen Warren
* 'for-3.5/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: disable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA
  ARM: tegra: add pll_x freq table entry for 750MHz

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09 23:26:15 -07:00
Paul Mundt
f9e2eae6c6 watchdog: shwdt: Trim down private data structure.
Now that we're using the generic watchdog core, kill off unused
elements from the private data structure.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 15:20:18 +09:00
Don Skidmore
eef4560f84 ixgbe: update version number
Update version number to better match the version of the out of tree
driver with similar functionality.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 23:18:03 -07:00
Paul Mundt
f9fb360cb3 watchdog: shwdt: Migrate to per-device locking.
Presently we've been using global locking for everything. Push the
locking down to the per-device level in preparation for per-CPU
watchdogs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 15:15:08 +09:00
Don Skidmore
1210982bb6 ixgbe: cleanup the hwmon function calls
When the hwmon code was initially added it was with the assumption that a
sysfs patch would be also coming soon.  Since that isn't the case some
clean up needs to be done.  This patch does that.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 23:14:43 -07:00
Jacob Keller
aa7bd467e3 ixgbe: support software timestamping
Kernel software timestamping requires that the driver calls skb_tx_timestamp
just before passing the skb to the MAC, in order to provide the best software
timestamps. This patch adds this call for that support.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 23:13:26 -07:00
Jacob Keller
e3aac889c7 ixgbe: add support for get_ts_info
This patch adds support for the ethtool get_ts_info operation, which enables
access of available timestamp/timesync support for that device. It can query
which ptp clock device is associated with the particular port.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 23:12:03 -07:00
Paul Mundt
1950f499df watchdog: shwdt: Conversion to watchdog core.
Fairly straightforward conversion to utilize watchdog core support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 15:07:53 +09:00
Jacob Keller
db76ad470e ixgbe: correct disable_rx_buff timeout
The current value of the udelay timeout for ixgbe_disable_rx_buff is too
short. This causes the security path to not not be properly disabled during
the section that is meant to have it turned off. The end result causes a race
condition that results in RX issues.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 23:07:26 -07:00
Jacob E Keller
681ae1adc4 ixgbe: Enable timesync clock-out feature for PPS support on X540
This patch enables the PPS system in the PHC framework, by enabling
the clock-out feature on the X540 device. Causes the SDP0 to be set as
a 1Hz clock. Also configures the timesync interrupt cause in order to
report each pulse to the PPS via the PHC framework, which can be used
for general system clock synchronization. (This allows a stable method
for tuning the general system time via the on-board SYSTIM register
based clock.)

Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 22:55:39 -07:00
Jacob Keller
3a6a4edaa5 ixgbe: Hardware Timestamping + PTP Hardware Clock (PHC)
This patch enables hardware timestamping for use with PTP software by
extracting a ns counter from an arbitrary fixed point cycles counter.
The hardware generates SYSTIME registers using the DMA tick which
changes based on the current link speed. These SYSTIME registers are
converted to ns using the cyclecounter and timecounter structures
provided by the kernel. Using the SO_TIMESTAMPING api, software can
enable and access timestamps for PTP packets.

The SO_TIMESTAMPING API has space for 3 different kinds of timestamps,
SYS, RAW, and SOF. SYS hardware timestamps are hardware ns values that
are then scaled to the software clock. RAW hardware timestamps are the
direct raw value of the ns counter. SOF software timestamps are the
software timestamp calculated as close as possible to the software
transmit, but are not offloaded to the hardware. This patch only
supports the RAW hardware timestamps due to inefficiency of the SYS
design.

This patch also enables the PHC subsystem features for atomically
adjusting the cycle register, and adjusting the clock frequency in
parts per billion. This frequency adjustment works by slightly
adjusting the value added to the cycle registers each DMA tick. This
causes the hardware registers to overflow rapidly (approximately once
every 34 seconds, when at 10gig link). To solve this, the timecounter
structure is used, along with a timer set for every 25 seconds. This
allows for detecting register overflow and converting the cycle
counter registers into ns values needed for providing useful
timestamps to the network stack.

Only the basic required clock functions are supported at this time,
although the hardware supports some ancillary features and these could
easily be enabled in the future.

Note that use of this hardware timestamping requires modifying daemon
software to use the SO_TIMESTAMPING API for timestamps, and the
ptp_clock PHC framework for accessing the clock. The timestamps have
no relation to the system time at all, so software must use the posix
clock generated by the PHC framework instead.

Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 22:48:51 -07:00
Greg Rose
44b82dded1 ixgbe: Fix bogus error message
If the VF sends a MACVLAN request with index of zero then it is not
actually trying to add a filter.  Check the index value and only
indicate that operation is not allowed when the VF is actually trying
to add a filter.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 22:40:29 -07:00
Alexander Duyck
3ebe8fdeb0 ixgbe: Set Drop_EN bit when multiple Rx queues are present w/o flow control
The drop enable bit can be used to improve the performance of the adapter
in the case of multiple queues being present.  This performance gain is due
to the fact that some slower CPUs can cause the FIFO to backfill preventing
faster CPUs from receiving additional work.  By setting the drop enable bit
we prevent this and instead just drop the packets that would have been
bound for the slower CPU.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 22:31:44 -07:00
Paul Mundt
4096812636 watchdog: shwdt: Migrate from reboot notifier to platform shutdown.
It's possible to do the same work via the platform driver shutdown
method, so wire that up and dump the reboot notifier.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 14:21:15 +09:00
Alexander Duyck
943561d3e7 ixgbe: Clean up priority based flow control
This change cleans up the logic in the priority based flow control
configuration routines.  Both the 82599 and 82598 based routines perform
similar functions however they are both arranged completely differently.
This patch goes over both of them to clean up the code.

In addition I am dropping the ixgbe_fc_pfc flow control mode and instead
just replacing it with checks for if priority flow control is enabled.
This allows us to maintain some of the link flow control information which
allows for an easier transition between link and priority flow control.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 22:15:40 -07:00
Alexander Duyck
dcaccc825b ixgbe: Exit on error case in VF message processing
Previously we would get a mailbox error and still process the message.
Instead we should exit on error.

In addition we should also be flushing the ACK of the message so that we
can guarantee that the other end is aware we have received the message
while we are processing it.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 22:02:05 -07:00
Koki Sanagi
7e3b4ffb38 igb: output register's information related to RX/TX queue[4-15]
Current igb outputs registers related to TX/RX queues(ex. RDT, RDH, TDT, TDH).
But it thinks the number of RX/TX queues is 4. But 82576 has 16 RX/TX queues.
This patch modifies igb to output the rest of the registers if the device is
82576.

Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Acked-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-09 21:41:55 -07:00
Jeff Kirsher
958a758681 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-05-09 21:12:37 -07:00
Paul Mundt
c5e50fa90c sh: Provide stubbed I/O routines for NO_IOPORT case.
Too many drivers fail at IOPORT vs IOMEM checking before blindly calling
in to the API, so we may as well just provide basic stubs to get more
build coverage. Other platforms already do this, too (tile, parisc, etc.)

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 13:07:55 +09:00
Kay Sievers
649e6ee33f printk() - restore timestamp printing at console output
The output of the timestamps got lost with the conversion of the
kmsg buffer to records; restore the old behavior.

Document, that CONFIG_PRINTK_TIME now only controls the output of
the timestamps in the syslog() system call and on the console, and
not the recording of the timestamps.

Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 20:35:06 -07:00
Kay Sievers
5c5d5ca51a printk() - do not merge continuation lines of different threads
This prevents the merging of printk() continuation lines of different
threads, in the case they race against each other.

It should properly isolate "atomic" single-line printk() users from
continuation users, to make sure the single-line users will never be
merged with the racy continuation ones.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 20:29:59 -07:00
Benjamin Herrenschmidt
b48d441a8a Merge remote-tracking branch 'jwb/next' into next
Josh writes:
<<
A few patches from Suzie for 47x kexec/kdump support, and some MSI patches
from Mai La.
>>
2012-05-10 12:58:24 +10:00
Paul Gortmaker
aa6f079075 sparc: fix build fail in mm/init_64.c when NEED_MULTIPLE_NODES is off
Commit 625d693e97 (linux-next)

    "sparc64: Convert over to NO_BOOTMEM."

causes the following compile failure for sparc64 allnoconfig:

  arch/sparc/mm/init_64.c:822:16: error: unused variable 'paddr'
  arch/sparc/mm/init_64.c:1759:7: error: unused variable 'node'
  arch/sparc/mm/init_64.c:809:12: error: 'memblock_nid_range' defined but not used

The paddr decl can easily be shuffled within the ifdef.  The
memblock_nid_range is just a stub function for when NEED_MULTIPLE_NODES
is off, but the only caller is within a NEED_MULTIPLE_NODES enabled
section, so we can simply delete it.

The unused "node" is slightly more interesting.  In the case of
"# CONFIG_NEED_MULTIPLE_NODES is not set" we no longer get the
definition of:

 #define NODE_DATA(nid)          (node_data[nid])

from arch/sparc/include/asm/mmzone.h - but instead we get:

 #define NODE_DATA(nid)          (&contig_page_data)

from include/linux/mmzone.h -- and since the arg is ignored,
the thing really is unused.  Rather than put in a confusing
looking __maybe_unused, simply splitting the declaration
from the assignment seemed to me to be the least offensive.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 19:58:07 -07:00
Rajesh Borundia
01da0c2b03 netxen_nic: Fix estimation of recv MSS in case of LRO
o Linux stack estimates MSS from skb->len or skb_shinfo(skb)->gso_size.
In case of LRO skb->len is aggregate of len of number of packets hence MSS
obtained using skb->len would be incorrect. Incorrect estimation of recv MSS
would lead to delayed acks in some traffic patterns (which sends two or three
packets and wait for ack and only then send remaining packets). This leads to
drop in performance. Hence we need to set gso_size to MSS obtained from firmware.

o This is fixed recently in firmware hence the MSS is obtained based on
capability. If fw is capable of sending the MSS then only driver sets the gso_size.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 22:53:04 -04:00
Sucheta Chakraborty
d612698b62 netxen: added miniDIMM support in driver.
Driver queries DIMM information from firmware and accordingly
sets "presence" field of the structure.
"presence" field when set to 0xff denotes invalid flag. And when
set to 0x0 denotes DIMM memory is not present.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 22:53:04 -04:00
Manish chopra
d8c3e77298 netxen_nic: Allow only useful and recommended firmware dump capture mask values
o 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F and 0xFF are the allowed capture masks.

Signed-off-by: Manish chopra <manish.chopra@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 22:53:04 -04:00
Sritej Velaga
458c285823 netxen_nic: disable minidump by default
disable fw dump by default at start up.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 22:53:04 -04:00
David S. Miller
ae535ba448 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next 2012-05-09 22:51:17 -04:00
Paul Mundt
15f99cbd07 Merge branch 'sh/rsk-updates' into sh-latest
Conflicts:
	arch/sh/Kconfig

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 11:51:07 +09:00
Phil Edworthy
41797f7548 sh: Add pinmux for sh7264
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 11:49:58 +09:00
David S. Miller
0e0c55165b Merge branch 'sfc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc 2012-05-09 22:49:57 -04:00
Phil Edworthy
d584e204ff sh: Add RSK2+SH7264 board
The RSK2+SH7264 board uses the sh7264 processor. It is often
referred to as just rsk7264. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 11:49:56 +09:00
Phil Edworthy
51ce30684e sh: Add sh7264 device
This is an sh2a device with FPU, video display controller (VDC),
8 serial ports, 3 I2C channels, 2 CAN ports, SD and on-chip USB.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10 11:49:54 +09:00
Ben Hutchings
ba62b2a860 sfc: Implement module EEPROM access for SFE4002 and SFN4112F
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 03:10:54 +01:00
Stuart Hodgson
c087bd2cfd sfc: Added support for new ethtool APIs for obtaining module eeprom
Currently allows for SFP+ eeprom to be returned using the ethtool API.
This can be extended in future to handle different eeprom formats
and sizes

Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com>
[bwh: Drop redundant validation, comment, whitespace]
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 03:10:46 +01:00
Stuart Hodgson
41c3cb6d20 ethtool: Extend the ethtool API to obtain plugin module eeprom data
ETHTOOL_GMODULEINFO returns a new struct ethtool_modinfo that will return the
type and size of plug-in module eeprom (such as SFP+) for parsing
by userland program.

ETHTOOL_GMODULEEEPROM returns the raw eeprom information
using the existing ethtool_eeprom structture to return the data

Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 02:22:17 +01:00
Ben Hutchings
081d094eaa ethtool: Split ethtool_get_eeprom() to allow for additional EEPROM accessors
We want to support reading module (SFP+, XFP, ...) EEPROMs as well as
NIC EEPROMs.  They will need a different command number and driver
operation, but the structure and arguments will be the same and so we
can share most of the code here.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 02:22:17 +01:00
David Riddoch
64235187c2 sfc: By default refill RX rings as soon as space for a batch
Previously we refilled with much larger batches, which caused large latency
spikes.  We now have many more much much smaller spikes!

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 02:22:17 +01:00
David Riddoch
da9ca50582 sfc: Fill RX rings completely full, rather than to 95% full
There was no runtime control of the fast_fill_limit in any case, so purged
that field.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 02:22:17 +01:00
Ben Hutchings
3de4e30196 sfc: Fix missing cleanup in failure path of efx_pci_probe()
We need to clear the private data pointer in the PCI device.
Also reorder cleanup in efx_pci_remove() for symmetry.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 02:22:16 +01:00
Stuart Hodgson
3dca9d2dc2 sfc: Do not attempt to flush queues if DMA is disabled
efx_nic_fatal_interrupt() disables DMA before scheduling a reset.
After this, we need not and *cannot* flush queues.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-10 02:22:08 +01:00
Joe Perches
8feedbb4a7 dsa: Convert compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 20:49:19 -04:00
Joe Perches
4c764729ab wireless: Convert compare_ether_addr to ether_addr_equal by hand
spatch/coccinelle isn't perfect.  It doesn't understand
__aligned(x) and doesn't convert functions it can't parse.

Convert the remaining compare_ether_addr uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 20:49:19 -04:00
Joe Perches
ac422d3cc2 wireless: Convert compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

I removed a conversion from scan.c/cmp_bss_core
that appears to be a sorting function.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 20:49:19 -04:00
Joe Perches
8561cf9978 netfilter: Convert compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 20:49:18 -04:00