Commit graph

336,024 commits

Author SHA1 Message Date
Scott Wood
52b066fa4e powerpc/booke: Set CPU_FTR_DEBUG_LVL_EXC on 32-bit
Currently 32-bit only cares about this for choice of exception
vector, which is done in core-specific code.  However, KVM will
want to distinguish as well.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:50:31 +03:00
Takuya Yoshikawa
93474b25af KVM: Remove unused dirty_bitmap_head and nr_dirty_pages
Now that we do neither double buffering nor heuristic selection of the
write protection method these are not needed anymore.

Note: some drivers have their own implementation of set_bit_le() and
making it generic needs a bit of work; so we use test_and_set_bit_le()
and will later replace it with generic set_bit_le().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:50:01 +03:00
Takuya Yoshikawa
60c34612b7 KVM: Switch to srcu-less get_dirty_log()
We have seen some problems of the current implementation of
get_dirty_log() which uses synchronize_srcu_expedited() for updating
dirty bitmaps; e.g. it is noticeable that this sometimes gives us ms
order of latency when we use VGA displays.

Furthermore the recent discussion on the following thread
    "srcu: Implement call_srcu()"
    http://lkml.org/lkml/2012/1/31/211
also motivated us to implement get_dirty_log() without SRCU.

This patch achieves this goal without sacrificing the performance of
both VGA and live migration: in practice the new code is much faster
than the old one unless we have too many dirty pages.

Implementation:

The key part of the implementation is the use of xchg() operation for
clearing dirty bits atomically.  Since this allows us to update only
BITS_PER_LONG pages at once, we need to iterate over the dirty bitmap
until every dirty bit is cleared again for the next call.

Although some people may worry about the problem of using the atomic
memory instruction many times to the concurrently accessible bitmap,
it is usually accessed with mmu_lock held and we rarely see concurrent
accesses: so what we need to care about is the pure xchg() overheads.

Another point to note is that we do not use for_each_set_bit() to check
which ones in each BITS_PER_LONG pages are actually dirty.  Instead we
simply use __ffs() in a loop.  This is much faster than repeatedly call
find_next_bit().

Performance:

The dirty-log-perf unit test showed nice improvements, some times faster
than before, except for some extreme cases; for such cases the speed of
getting dirty page information is much faster than we process it in the
userspace.

For real workloads, both VGA and live migration, we have observed pure
improvements: when the guest was reading a file during live migration,
we originally saw a few ms of latency, but with the new method the
latency was less than 200us.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:50:00 +03:00
Takuya Yoshikawa
5dc99b2380 KVM: Avoid checking huge page mappings in get_dirty_log()
Dropped such mappings when we enabled dirty logging and we will never
create new ones until we stop the logging.

For this we introduce a new function which can be used to write protect
a range of PT level pages: although we do not need to care about a range
of pages at this point, the following patch will need this feature to
optimize the write protection of many pages.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:58 +03:00
Takuya Yoshikawa
a0ed46073c KVM: MMU: Split the main body of rmap_write_protect() off from others
We will use this in the following patch to implement another function
which needs to write protect pages using the rmap information.

Note that there is a small change in debug printing for large pages:
we do not differentiate them from others to avoid duplicating code.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:56 +03:00
Eric B Munson
248997095d kvmclock: remove unneeded EXPORT macro
check_and_clear_guest_paused does not need to be exported as it isn't used
by any modules, remove the export.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:54 +03:00
Marcelo Tosatti
8c84780df9 KVM: fix kvm_vcpu_kick build failure on S390
S390's kvm_vcpu_stat does not contain halt_wakeup member.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:42 +03:00
Eric B Munson
5d1c0f4a80 watchdog: add check for suspended vm in softlockup detector
A suspended VM can cause spurious soft lockup warnings.  To avoid these, the
watchdog now checks if the kernel knows it was stopped by the host and skips
the warning if so.  When the watchdog is reset successfully, clear the guest
paused flag.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:03 +03:00
Eric B Munson
1c0b28c2a4 KVM: x86: Add ioctl for KVM_KVMCLOCK_CTRL
Now that we have a flag that will tell the guest it was suspended, create an
interface for that communication using a KVM ioctl.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:49:01 +03:00
Eric B Munson
3b5d56b931 kvmclock: Add functions to check if the host has stopped the vm
When a host stops or suspends a VM it will set a flag to show this.  The
watchdog will use these functions to determine if a softlockup is real, or the
result of a suspended VM.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
asm-generic changes Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:48:59 +03:00
Eric B Munson
eae3ee7d8a x86: pvclock: Add flag to indicate that a vm was stopped by the host
This flag will be used to check if the vm was stopped by the host when a soft
lockup was detected.  The host will set the flag when it stops the guest.  On
resume, the guest will check this flag if a soft lockup is detected and skip
issuing the warning.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:48:57 +03:00
Alexander Graf
2246f8b563 KVM: PPC: Rework wqp conditional code
On PowerPC, we sometimes use a waitqueue per core, not per thread,
so we can't always use the vcpu internal waitqueue.

This code has been generalized by Christoffer Dall recently, but
unfortunately broke compilation for PowerPC. At the time the helper
function is defined, struct kvm_vcpu is not declared yet, so we can't
dereference it.

This patch moves all logic into the generic inline function, at which
time we have all information necessary.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:47:49 +03:00
Christoffer Dall
b6d33834bd KVM: Factor out kvm_vcpu_kick to arch-generic code
The kvm_vcpu_kick function performs roughly the same funcitonality on
most all architectures, so we shouldn't have separate copies.

PowerPC keeps a pointer to interchanging waitqueues on the vcpu_arch
structure and to accomodate this special need a
__KVM_HAVE_ARCH_VCPU_GET_WQ define and accompanying function
kvm_arch_vcpu_wq have been defined. For all other architectures this
is a generic inline that just returns &vcpu->wq;

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:47:47 +03:00
Avi Kivity
66ef89315f KVM: schedule debugfs statistics for removal
Deprecated in favour of tracepoints.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:47:32 +03:00
Jason Wang
675acb758a KVM: SVM: count all irq windows exit
Also count the exits of fast-path.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:47:01 +03:00
Amos Kong
786a9f888b KVM: set upper bounds for iobus dev to limit userspace
kvm_io_bus devices are used for ioevent, pit, pic, ioapic,
coalesced_mmio.

Currently Qemu only emulates one PCI bus, it contains 32 slots,
one slot contains 8 functions, maximum of supported PCI devices:
 1 * 32 * 8 = 256. One virtio-blk takes one iobus device,
one virtio-net(vhost=on) takes two iobus devices.
The maximum of coalesced mmio zone is 100, each zone
has an iobus devices. So 300 io_bus devices are not enough.

Set an upper bounds for kvm_io_range to limit userspace.
1000 is a very large limit and not bloat the typical user.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:47:00 +03:00
Amos Kong
a13007160f KVM: resize kvm_io_range array dynamically
This patch makes the kvm_io_range array can be resized dynamically.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:46:58 +03:00
Liu, Jinsong
83c529151a KVM: x86: expose Intel cpu new features (HLE, RTM) to guest
Intel recently release 2 new features, HLE and RTM.
Refer to http://software.intel.com/file/41417.
This patch expose them to guest.

Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-08 12:46:32 +03:00
Linus Torvalds
0034102808 Linux 3.4-rc2 v3.4-rc2 2012-04-07 18:30:41 -07:00
Eric W. Biederman
7b44ab978b userns: Disassociate user_struct from the user_namespace.
Modify alloc_uid to take a kuid and make the user hash table global.
Stop holding a reference to the user namespace in struct user_struct.

This simplifies the code and makes the per user accounting not
care about which user namespace a uid happens to appear in.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 17:11:46 -07:00
Eric W. Biederman
5673a94c14 userns: Add a Kconfig option to enforce strict kuid and kgid type checks
Make it possible to easily switch between strong mandatory
type checks and relaxed type checks so that the code can
easily be tested with the type checks and then built
with the strong type checks disabled so the resulting
code can be used.

Require strong mandatory type checks when enabling the user namespace.
It is very simple to make a typo and use the wrong type allowing
conversions to/from userspace values to be bypassed by accident,
the strong type checks prevent this.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 17:11:01 -07:00
Eric W. Biederman
7a4e7408c5 userns: Add kuid_t and kgid_t and associated infrastructure in uidgid.h
Start distinguishing between internal kernel uids and gids and
values that userspace can use.  This is done by introducing two
new types: kuid_t and kgid_t.  These types and their associated
functions are infrastructure are declared in the new header
uidgid.h.

Ultimately there will be a different implementation of the mapping
functions for use with user namespaces.  But to keep it simple
we introduce the mapping functions first to separate the meat
from the mechanical code conversions.

Export overflowuid and overflowgid so we can use from_kuid_munged
and from_kgid_munged in modular code.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 17:09:52 -07:00
Eric W. Biederman
1a48e2ac03 userns: Replace the hard to write inode_userns with inode_capable.
This represents a change in strategy of how to handle user namespaces.
Instead of tagging everything explicitly with a user namespace and bulking
up all of the comparisons of uids and gids in the kernel,  all uids and gids
in use will have a mapping to a flat kuid and kgid spaces respectively.  This
allows much more of the existing logic to be preserved and in general
allows for faster code.

In this new and improved world we allow someone to utiliize capabilities
over an inode if the inodes owner mapps into the capabilities holders user
namespace and the user has capabilities in their user namespace.  Which
is simple and efficient.

Moving the fs uid comparisons to be comparisons in a flat kuid space
follows in later patches, something that is only significant if you
are using user namespaces.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 17:02:46 -07:00
Eric W. Biederman
973c591426 userns: Start out with a full set of capabilities.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:59 -07:00
Eric W. Biederman
d0bd6594e2 userns: Deprecate and rename the user_namespace reference in the user_struct
With a user_ns reference in struct cred the only user of the user namespace
reference in struct user_struct is to keep the uid hash table alive.

The user_namespace reference in struct user_struct will be going away soon, and
I have removed all of the references.  Rename the field from user_ns to _user_ns
so that the compiler can verify nothing follows the user struct to the user
namespace anymore.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:54 -07:00
Eric W. Biederman
6f9ac6d93a mqueue: Explicitly capture the user namespace to send the notification to.
Stop relying on user->user_ns which is going away and instead capture
the user_namespace of the process we are supposed to notify.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:53 -07:00
Eric W. Biederman
aeb3ae9da9 userns: Add an explicit reference to the parent user namespace
I am about to remove the struct user_namespace reference from struct user_struct.
So keep an explicit track of the parent user namespace.

Take advantage of this new reference and replace instances of user_ns->creator->user_ns
with user_ns->parent.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:52 -07:00
Eric W. Biederman
0093ccb68f cred: Refcount the user_ns pointed to by the cred.
struct user_struct will shortly loose it's user_ns reference
so make the cred user_ns reference a proper reference complete
with reference counting.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:52 -07:00
Eric W. Biederman
c4a4d60379 userns: Use cred->user_ns instead of cred->user->user_ns
Optimize performance and prepare for the removal of the user_ns reference
from user_struct.  Remove the slow long walk through cred->user->user_ns and
instead go straight to cred->user_ns.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:51 -07:00
Eric W. Biederman
7e6bd8fadd cred: Add forward declaration of init_user_ns in all cases.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:50 -07:00
Eric W. Biederman
74ba508f60 userns: Remove unnecessary cast to struct user_struct when copying cred->user.
In struct cred the user member is and has always been declared struct user_struct *user.
At most a constant struct cred will have a constant pointer to non-constant user_struct
so remove this unnecessary cast.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:55:05 -07:00
Eric W. Biederman
39fda8db80 userns: Replace netlink uses of cap_raised with capable.
In 2009 Philip Reiser notied that a few users of netlink connector
interface needed a capability check and added the idiom
cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise
that netlink was asynchronous.

In 2011 Patrick McHardy noticed we were being silly because netlink is
synchronous and removed eff_cap from the netlink_skb_params and changed
the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN).

Looking at those spots with a fresh eye we should be calling
capable(CAP_SYS_ADMIN).  The only reason I can see for not calling
capable is that it once appeared we were not in the same task as the
caller which would have made calling capable() impossible.

In the initial user_namespace the only difference between  between
cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN)
are a few sanity checks and the fact that capable(CAP_SYS_ADMIN)
sets PF_SUPERPRIV if we use the capability.

Since we are going to be using root privilege setting PF_SUPERPRIV
seems the right thing to do.

The motivation for this that patch is that in a child user namespace
cap_raised(current_cap(),...) tests your capabilities with respect to
that child user namespace not capabilities in the initial user namespace
and thus will allow processes that should be unprivielged to use the
kernel services that are only protected with
cap_raised(current_cap(),..).

To fix possible user_namespace issues and to just clean up the code
replace cap_raised(current_cap(), CAP_SYS_ADMIN) with
capable(CAP_SYS_ADMIN).

Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-04-07 16:53:12 -07:00
Arnaldo Carvalho de Melo
d3d1f61acf perf annotate browser: string search: /?n
Using the same keystrokes as vim:

/ = search forward
n = search next forward/backwards
? = search backwards

Still needs to continue from start/end when not found, use HOME + / or
END + ? for now.

At some point we need a keybindings file to support ones favourite mode,
erm, like EMACS, etc.

Also we now need a 'h' window with all these keybindings.

Requested-by: Andi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rv30xj2i258n0gwkzlu0c0bc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 17:37:22 -03:00
Grant Likely
f141ed65f2 gpio: Move DT support code into drivers/gpio
The code in drivers/of/gpio.c isn't shared by any other subsystem since it
is all gpiolib specific.  drivers/gpio is a better place to maintain these
functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
2012-04-07 14:35:28 -06:00
Axel Lin
93baa65fe5 gpio: Convert drivers to use module_pci_driver()
This patch converts the drivers in drivers/gpio/* to use
module_pci_driver() macro which makes the code smaller and a bit
simpler by having less boilerplate.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-07 14:30:35 -06:00
Ashay Rane
cc68628096 perf report: Correct display of samples and events in header
This patch prints the number of samples and the count of performance
events separately.

This allows comparing performance of different applications with each
other.

Previously, the sample count was displayed against an 'Events:' heading.
With this patch, the header now reads (for example):

Samples: 5K of event 'instructions'
Event count (approx.): 2993026545

The patch covers both the stdio and the browser interface.

Signed-off-by: Ashay Rane <ashay.rane@tacc.utexas.edu>
[ committer note: Fixed wrt e7f01d1 ]
Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 17:29:41 -03:00
Arnaldo Carvalho de Melo
08be4eeda4 perf annotate browser: Initial support for navigating jump instructions
Now it is possible to press ENTER or -> (right arrow) on jump
instructions to navigate to the offset it points to.

More work needed to support <- to go back, i.e. a jump history.

This is done just like the callq case, i.e. parsing objdump output
lines, but should move to use Masami's disassembler at some point.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-706qqe2xibeiocuabp39mby7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:14:23 -03:00
Arnaldo Carvalho de Melo
b0ffb2c48a perf ui annotate browser: Add list based search for addr offset
From the hit sorted rb_tree, so that we can use it in the upcoming jump
instruction support.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-44a7kl2atf9jxlg9npmotzdg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:11:33 -03:00
Arnaldo Carvalho de Melo
6052170249 perf ui annotate browser: Move callq handling to separate function
So that we can as well handle jumps. Later we'll move this to a proper
intruction table, etc.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i98elvmix2cw6t8stu1iagfd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:10:50 -03:00
Arnaldo Carvalho de Melo
e235f3f3bf perf ui annotate browser: Allow toggling addr offset view
The lines in objdump have this format:

    ffffffff8126543f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
    ffffffff81265494:       mov    %rdi,%rcx

Since we now have objdump_line allowing tools to print the offset
independently from the rest of the line, allow toggling a view where
just offsets from the start of the function are shown:

     2f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
     84:       mov    %rdi,%rcx

The offset view will be the default as soon as operations that deal with
offsets in a function are handled accodringly, i.e. in offset view the
above will become:

     2f:       jne    __list_del_entry+0x84
<SNIP>
     84:       mov    %rdi,%rcx

And then a follow up patch will allow navigating thru jumps, just like
we handle callq instructions.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4zpgimmz8xv7b5c920el7s45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:10:19 -03:00
Arnaldo Carvalho de Melo
058b4cc9af perf annotate: Allow printing objdump line addr in different color
And by default use "magenta" for it.

Both the --stdio and --tui routines follow the same semantics.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ede5zkaf7oorwvbqjezb4yg4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:09:05 -03:00
Arnaldo Carvalho de Melo
087091652b perf ui browser: Return the current color when setting a new one
Tools that want to change parts of the line to a different color and
then restore the previous one will use this, starting with the annotate
browser that will change the color of addresses if not on the current
entry, i.e. the selected one.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uiajpevhxo4mzrvna6remb4a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:08:42 -03:00
Linus Torvalds
f4e52e7ffd regmap: A couple of small fixes for 3.4
Two more small fixes:
 - Now we have users for it that aren't running Android it turns out that
   regcache_sync_region() is much more useful to drivers if it's exported
   for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of rbtrees,
   not visible up until now because everything was providing at least
   some cache on startup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPfMvJAAoJEBus8iNuMP3d43YQAI8IJqPoAqK2eKjQlYNRzP3O
 hWgA6oU56Yqg0PZKKTbWKkul2j9onRV7UrCsXrKo9gCVFNAROkMh9q8uZxzf7yl1
 AlOsoKDH/ijYhuAkbLri5tWc8vw5SZS/rSXx6BnVAIPgDjaCEoJcd6swJTfieuyz
 slN+y3Y3FDk7zIefkcAlMpUR5ks+jAHOHhk/Kwe5+xP3xk/09acuiNogpPYRH4Fp
 2tV9Qr9cSrDKIX8eLkR/AkRkmESMIzkpEopQY4vpYO+GiEwyKGdGjMTqkgjQ7PSk
 jL1lp36CAeVuR7Bp3OFT7bilXZKTrkOiwkC2ctFmyjYK+VO4HWBeOeMmoZvTBRCO
 +RXAZVN0zFyxPuH6ZJqOuQpCyoY0JBZPZulwRrXGsQpQOoITuEt9yJpLfDSj6hYd
 Pj8NLHT10n8DBnLk8nXuxT0mNgGDBTNOVCpVblmfm2CLcEGOQsAzWCgCKjkehCUJ
 O3I/3ZHzs1tvCZNcmt5HH8d8D+iMtkOS8bSHTHvZ2ADjSXWGPgXYlUwObYH6kV9N
 nMYi8Q6r8skkESL1jaE12XMZxGm07emIyUh+9hfM0lLGEC/cPff2gXwKhtZMDQfE
 XELx3e/EbyqNsNqFd71v9XpGyJA9si7JvPY/ZSei/CTqToIEAsX/BwGMKGAWnrNy
 ARlp9oaM6BOOg+i2Ddrg
 =qm1Q
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull two more small regmap fixes from Mark Brown:
 - Now we have users for it that aren't running Android it turns out
   that regcache_sync_region() is much more useful to drivers if it's
   exported for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of
   rbtrees, not visible up until now because everything was providing at
   least some cache on startup.

* tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent division by zero in rbtree_show
  regmap: Export regcache_sync_region()
2012-04-07 09:56:00 -07:00
Linus Torvalds
a3fac08085 Merge branch 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull a few KVM fixes from Avi Kivity:
 "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated),
  and a small build fix."

* 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Resolve RCU vs. async page fault problem
  KVM: VMX: vmx_set_cr0 expects kvm->srcu locked
  KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr()
  KVM: PPC: Book3S: PR: Fix preemption
  KVM: PPC: Save/Restore CR over vcpu_run
  KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry
  KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist
  KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code
2012-04-07 09:53:33 -07:00
Linus Torvalds
664481ed45 SuperH updates for 3.4-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAk99uBgACgkQGkmNcg7/o7hglwCgqi6CE7i5gyneNYBn2ocRps4O
 y1UAoMSIscO6YWcHPuxOiNBbJYUy/jMI
 =SEO8
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver
  serial: sh-sci: use serial_port_in/out vs sci_in/out.
  sh: vsyscall: Fix up .eh_frame generation.
  sh: dma: Fix up device attribute mismatch from sysdev fallout.
  sh: dwarf unwinder depends on SHcompact.
  sh: fix up fallout from system.h disintegration.
2012-04-07 09:52:46 -07:00
Linus Torvalds
d6a624eef1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer fixlet from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  sysctl: fix write access to dmesg_restrict/kptr_restrict
2012-04-07 09:51:36 -07:00
David S. Miller
2f6f9d6fe5 fealnx: Remove unused local label 'out' in netdev_open().
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07 09:02:32 -04:00
Takashi Iwai
c38f62b08d ASoC: fixes for 3.4
A bunch of driver-specific fixes and one generic fix for the new support
 for platform DAPM contexts - we were picking the wrong default for the
 idle_bias_off setting which was meaning we weren't actually achieving
 any useful runtime PM on platform devices.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPftQoAAoJEBus8iNuMP3du4IQAIxcJs4Q6wckpnu8bcFr4+Gr
 UstCaoS7R3BROe1rtZJr6WPzkVGkriYJdRvH66q/PDJ9f97CFMR4b0IwKnHXUbbL
 CVR8dod1I4+0PGF7D08UfHln5uUYO17HaKB5aYPzzcBegA4DZwUtSvnvaBVpg7kK
 JQM5S6G6nb68mroyfSF6XsmCM3ehwgykiqlo1TH9WQQ0Z6KbNatV86mi2W8jxvwB
 xh7EafL1v9MmpDkqEVEseaI6Mr7N/DiaNHzozqW7Na2nVgddRTXzh2dXA8gsr4VW
 vsAoIrACc0zCgmwyYgRN0Dg8k2hqcbERbd/prmgHCYDUQc6n6mUf/AwE+ZZMo0FK
 iCOMMZbESxxWqPNnSz9+H5pgoDLITB8kTOjp1TwGu9xYc0wEkHo+DiG5ZG3pZsCv
 OKfF/FiBL30OlsefT+kKFzn+3Ve9ryJ4NZ7SYg6zWGqLmBidWle3c2yZqAldSavx
 kHjw4I1YAO552fGK7v5Dij/ClUps5dYdiczxqzdIgH0GE0sTfsYQrtfl8nXy5+mf
 cKAljqwM9ONAZ7CbAO6To6MPy9qhCmVLGPFGT7BdXJDyK2YGLGGWQiRITdnULSZd
 AhG8EitOgtgOprMFLEgkcKb6cnHE4/Ry1V8jhYg0+1D+YIuTWhsYeO+mci+zto/r
 0ZnX6E5R/aA8Z56+7xgU
 =EiwZ
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: fixes for 3.4

A bunch of driver-specific fixes and one generic fix for the new support
for platform DAPM contexts - we were picking the wrong default for the
idle_bias_off setting which was meaning we weren't actually achieving
any useful runtime PM on platform devices.
2012-04-07 12:28:00 +02:00
Takashi Iwai
5ff5c3a4ab Merge branch 'fix/hda' into topic/hda
Conflicts:
	sound/pci/hda/patch_conexant.c
2012-04-07 12:26:55 +02:00
Michael Karcher
250f32747e ALSA: hda - clean up CX20549 test mixer setup
name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls
affecting those pins.

remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1

really select MIC1, not Mixer out for recording

"Mixer out" for recording is not a "pin", adjust comment

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-07 12:25:56 +02:00