Currently, blkg points to the associated blkcg via its css_id. This
unnecessarily complicates dereferencing blkcg. Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.
This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-cgroup printing code currently assumes that there is a device/disk
associated with every queue in the system, but modules like floppy,
can instantiate request queues without registering disk which can lead
to oops.
Skip the queue/blkg which don't have dev/disk associated with them.
-tj: Factored out backing_dev_info check into blkg_dev_name().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg->dev is dev_t recording the device number of the block device for
the associated request_queue. It is used to identify the associated
block device when printing out configuration or stats.
This is redundant to begin with. A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning. Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info. The mind boggles.
Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.
Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that blkcg configuration lives in blkg's, blkio_policy_node is no
longer necessary. Kill it.
blkio_policy_parse_and_set() now fails if invoked for missing device
and functions to print out configurations are updated to print from
blkg's.
cftype_blkg_same_policy() is dropped along with other policy functions
for consistency. Its one line is open coded in the only user -
blkio_read_blkg_stats().
-v2: Update to reflect the retry-on-bypass logic change of the
previous patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.
This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.
It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.
Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.
Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).
This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.
-v2: Updated to retry after short sleep if blkg lookup/creation failed
due to the queue being temporarily bypassed as indicated by
-EBUSY return. Pointed out by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.
* New plkio_policy_ops methods blkio_alloc_group_fn() and
blkio_link_group_fn added. Both are transitional and will be
removed once the blkg management code is fully moved into
blk-cgroup.c.
* blkio_alloc_group_fn() allocates policy-specific blkg which is
usually a larger data structure with blkg as the first entry and
intiailizes it. Note that initialization of blkg proper, including
percpu stats, is responsibility of blk-cgroup proper.
Note that default config (weight, bps...) initialization is done
from this method; otherwise, we end up violating locking order
between blkcg and q locks via blkcg_get_CONF() functions.
* blkio_link_group_fn() is called under queue_lock and responsible for
linking the blkg to the queue. blkcg side is handled by blk-cgroup
proper.
* The common blkg creation function is named blkg_lookup_create() and
blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
Also, throtl / cfq related functions are similarly [re]named for
consistency.
This simplifies blkcg policy implementations and enables further
cleanup.
-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
blk_queue_dead() instead of blk_queue_bypass() leading a user of
the function ending up creating a new blkg on bypassing queue.
This is a bug introduced while relocating bypass patches before
this one. Fixed.
-v3: ERR_PTR patch folded into this one. @for_root added to
blkg_lookup_create() to allow creating root group on a bypassed
queue during elevator switch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For root blkg, blk_throtl_init() was using throtl_alloc_tg()
explicitly and cfq_init_queue() was manually initializing embedded
cfqd->root_group, adding unnecessarily different code paths to blkg
handling.
Make both use the usual blkio_group get functions - throtl_get_tg()
and cfq_get_cfqg() - for the root blkio_group too. Note that
blk_throtl_init() callsite is pushed downwards in
blk_alloc_queue_node() so that @q is sufficiently initialized for
throtl_get_tg().
This simplifies root blkg handling noticeably for cfq and will allow
further modularization of blkcg API.
-v2: Vivek pointed out that using cfq_get_cfqg() won't work if
CONFIG_CFQ_GROUP_IOSCHED is disabled. Fix it by factoring out
initialization of base part of cfqg into cfq_init_cfqg_base() and
alloc/init/free explicitly if !CONFIG_CFQ_GROUP_IOSCHED.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block cgroup policies are maintained in a linked list and,
theoretically, multiple policies sharing the same policy ID are
allowed.
This patch temporarily restricts one policy per plid and adds
blkio_policy[] array which indexes registered policy types by plid.
Both the restriction and blkio_policy[] array are transitional and
will be removed once API cleanup is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkgio_group is association between a block cgroup and a queue for a
given policy. Using opaque void * for association makes things
confusing and hinders factoring of common code. Use request_queue *
and, if necessary, policy id instead.
This will help block cgroup API cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In both blkg get functions - throtl_get_tg() and cfq_get_cfqg(),
instead of obtaining blkcg of %current explicitly, let the caller
specify the blkcg to use as parameter and make both functions hold on
to the blkcg.
This is part of block cgroup interface cleanup and will help making
blkcg API more modular.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rcu_read_lock() in throtl_get_tb() and cfq_get_cfqg() holds onto
@blkcg while looking up blkg. For API cleanup, the next patch will
make the caller responsible for determining @blkcg to look blkg from
and let them specify it as a parameter. Move rcu read locking out to
the callers to prepare for the change.
-v2: Originally this patch was described as a fix for RCU read locking
bug around @blkg, which Vivek pointed out to be incorrect. It
was from misunderstanding the role of rcu locking as protecting
@blkg not @blkcg. Patch description updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Elevator switch may involve changes to blkcg policies. Implement
shoot down of blkio_groups.
Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates. Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.
* blk-throtl doesn't need this change as it can't be disabled for a
live queue; however, update it anyway as the scheduled blkg
unification requires this behavior change. This means that
blk-throtl configuration will be unnecessarily lost over elevator
switch. This oddity will be removed after blkcg learns to associate
individual policies with request_queues.
* blk-throtl dosen't shoot down root_tg. This is to ease transition.
Unified blkg will always have persistent root group and not shooting
down root_tg for now eases transition to that point by avoiding
having to update td->root_tg and is safe as blk-throtl can never be
disabled
-v2: Vivek pointed out that group list is not guaranteed to be empty
on return from clear function if it raced cgroup removal and
lost. Fix it by waiting a bit and retrying. This kludge will
soon be removed once locking is updated such that blkg is never
in limbo state between blkcg and request_queue locks.
blk-throtl no longer shoots down root_tg to avoid breaking
td->root_tg.
Also, Nest queue_lock inside blkio_list_lock not the other way
around to avoid introduce possible deadlock via blkcg lock.
-v3: blkcg_clear_queue() repositioned and renamed to
blkg_destroy_all() to increase consistency with later changes.
cfq_clear_queue() updated to check q->elevator before
dereferencing it to avoid NULL dereference on not fully
initialized queues (used by later change).
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend queue bypassing such that dying queue is always bypassing and
blk-throttle is drained on bypass. With blkcg policies updated to
test blk_queue_bypass() instead of blk_queue_dead(), this ensures that
no bio or request is held by or going through blkcg policies on a
bypassing queue.
This will be used to implement blkg cleanup on elevator switches and
policy changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename and extend elv_queisce_start/end() to
blk_queue_bypass_start/end() which are exported and supports nesting
via @q->bypass_depth. Also add blk_queue_bypass() to test bypass
state.
This will be further extended and used for blkio_group management.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_ops->elevator_init_fn() has a weird return value. It returns
a void * which the caller should assign to q->elevator->elevator_data
and %NULL return denotes init failure.
Update such that it returns integer 0/-errno and sets elevator_data
directly as necessary.
This makes the interface more conventional and eases further cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Elevator switch tries hard to keep as much as context until new
elevator is ready so that it can revert to the original state if
initializing the new elevator fails for some reason. Unfortunately,
with more auxiliary contexts to manage, this makes elevator init and
exit paths too complex and fragile.
This patch makes elevator_switch() unregister the current elevator and
flush icq's before start initializing the new one. As we still keep
the old elevator itself, the only difference is that we lose icq's on
rare occassions of switching failure, which isn't critical at all.
Note that this makes explicit elevator parameter to
elevator_init_queue() and __elv_register_queue() unnecessary as they
always can use the current elevator.
This patch enables block cgroup cleanups.
-v2: blk_add_trace_msg() prints elevator name from @new_e instead of
@e->type as the local variable no longer exists. This caused
build failure on CONFIG_BLK_DEV_IO_TRACE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq has been registering zeroed blkio_poilcy_cfq if CFQ_GROUP_IOSCHED
is disabled. This fortunately doesn't collide with blk-throtl as
BLKIO_POLICY_PROP is zero but is unnecessary and risky. Just don't
register it if not enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block cgroup core can be built as module; however, it isn't too useful
as blk-throttle can only be built-in and cfq-iosched is usually the
default built-in scheduler. Scheduled blkcg cleanup requires calling
into blkcg from block core. To simplify that, disallow building blkcg
as module by making CONFIG_BLK_CGROUP bool.
If building blkcg core as module really matters, which I doubt, we can
revisit it after blkcg API cleanup.
-v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to
depend on BLK_CGROUP. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blk_cleanup_queue() doesn't call elv_drain_elevator() if
q->elevator doesn't exist; however, bio based drivers don't have
elevator initialized but can still use blk-throttle. This patch moves
q->elevator test inside blk_drain_queue() such that only
elv_drain_elevator() is skipped if !q->elevator.
-v2: loop can have registered queue which has NULL request_fn. Make
sure we don't call into __blk_run_queue() in such cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Fold in bug fix from Vivek.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixing sparse warnings, the 2 functions are only used in same
file. Defining them as static and not exporting them.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removing functions that are no longer in use, but still exist
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SET_PORT functions are implemented in port.c, which is part
of mlx4_core, these functions are exported. The functions are in use by
the mlx4_en module (were originally part of mlx4_en).
Their declaration remained in mlx4_en module, moving the declaration to the right location.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mac should be written as __be64 the gid. The warning was because
we changed the mac parameter, which is u64, by writing result of cpu_to_be64
into it. Fixing by using new variable of type __be64.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
The keys used for the hardware RSS topelitz hash are of type __be32
where the values provided by the driver are from array of u32,
this triggered sparse warning on incorrect type in assignment as of different base types.
Since these values are picked randomly,
the fix is to transform the key to __be32 by executing cpu_to_be_32()
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
The blue flame buffer is defined to be of type void __iomem *
but was passed to mlx4_bf_copy which gets unsigned long * .
This triggered sparse warning on different address spaces,
fix that by changing mlx4_bf_copy first param to be of type void __iomem * .
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix sparse warnings on incompatibility between the endianess of the ctrl_flags
field of struct mlx4_en_priv to the srcrb_flags field of struct
mlx4_wqe_ctrl_seg by changing the former to be __be32 instead of u32.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Localized the pdev->dev, and using dma_map instead of pci_map
There are multiple map/unmap operations on data path,
optimizing those by saving redundant pointer access.
Those places were identified as hot-spots when running kernel profiling
during some benchmarks.
The fixes had most impact when testing packet rate with small packets,
reducing several % from CPU load, and in some case being the difference
between reaching wire speed or being CPU bound.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Silence the following warning:
"warn: returning -1 instead of -ENOMEM is sloppy".
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The socket local pointer needs to be set to NULL when the adapter is
removed or the MAC goes down.
If the socket release code is called after such an event, the socket
reference count still needs to be decreased in order for the socket to
eventually be freed.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When calling nfc_dep_link_up, we implicitely are in initiator mode.
Which means we also can provide the general bytes as a function argument,
as all drivers will eventually request them.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We just don't do anything with it when parsing the general bytes.
We handle it from the CONNECT reception code.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The parent socket (the bound one) could be freed before its children, so
we should unlink the children without trying to reach it through the parent.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The jewel ID is the NFCID1 for Topaz NFC tags.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
sensf is the detection response for Felica NFC tags.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Based on the receiver MIU, we have to fragment the frame to be
transmitted.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We use the maximum values for the LLCP Maximum Information Unit and Receive
Window Size.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
In order to acknowledge an I frame, we have to either queue pending local
I frames or queue a receiver ready frame.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The polled target structure should be memset to 0 in order to avoid
sel_res and sens_res garbage.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This one will be called from the I frame command sending.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
For user space to know if a device is up or down.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>