Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260603112011.230890-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable autosuspend support for Telit Cinterion LE310X1 RNDIS interface
by selecting a driver_info variant with manage_power callback.
This keeps power management scoped to the new Telit ID only, and avoids
changing behavior for all existing RNDIS devices.
Signed-off-by: Shaoxu Liu <shaoxul@foxmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/tencent_B7686B84CD4B76D76BB912FA6367FAC2CA05@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a device match entry for Telit Cinterion LE310X1 RNDIS interface
(VID:PID 1bc7:7030).
This is a functional no-op and keeps using the generic rndis_info for now.
Power-management behavior is handled in a follow-up patch.
Signed-off-by: Shaoxu Liu <shaoxul@foxmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/tencent_F1AF1F5AD39C56485BD16C6DB2415E5B9508@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bonding sysfs and procfs read parameters locklessly,
while drivers/net/bonding/bond_options.c can write over them.
Add missing READ_ONCE()/WRITE_ONCE() annotations.
This came as a prereq to avoid RTNL in bond_fill_info().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260602152748.2564393-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__team_port_change_send() calls __ethtool_get_link_ksettings() on
the port, which will soon take the port's ops lock. The notifier
caller already holds it while the slave-add/del callers do not,
so the function would either deadlock or run unprotected depending
on the path.
Make __team_port_change_send() expect the port's ops lock held and
switch to netif_get_link_ksettings(). team_device_event()'s NETDEV_UP /
NETDEV_CHANGE already arrive with the port's ops lock held.
team_port_add() now take it explicitly.
Note that NETDEV_DOWN and team_port_del() will pass false as @linkup
so they will not execute netif_get_link_ksettings(). This is fortunate
as NETDEV_DOWN has somewhat mixed locking right now.
Link: https://patch.msgid.link/20260603012840.2254293-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bond_update_speed_duplex() calls __ethtool_get_link_ksettings() on
the slave, which will soon take the slave's ops lock. One of its
callers already holds it and the other three don't, so the function
would either deadlock or run unprotected depending on the path.
Make the helper expect the slave's ops lock held and switch to
netif_get_link_ksettings(). Wrap the three call sites that don't
already hold it:
* bond_enslave() (rtnl held; core drops the lower's ops lock
around ->ndo_add_slave).
* bond_miimon_commit() (rtnl_trylock'd from the mii workqueue).
* bond_ethtool_get_link_ksettings() (rtnl held via ethtool layer,
bond device itself is not ops locked).
The call site which does already hold the ops lock is
bond_slave_netdev_event() via NETDEV_UP / NETDEV_CHANGE notifiers,
so it stays as-is.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260603012840.2254293-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub suggests renaming the existing assert to match
the netdev_lock_ops_compat() semantics.
We want netdev_assert_locked_ops() to mean - if the driver
is ops locked - check that it's holding the device lock.
The existing helper check for either ops lock or rtnl_lock,
which is the locking behavior of netdev_lock_ops_compat().
The reason for naming divergence is likely that
netdev_ops_assert_locked() predated the _compat() helpers.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dr_icm_buddy_init_ste_cache() allocates the per-buddy miss_list using
the open-coded kvmalloc(n * sizeof(*p), ...) form. The neighbouring
allocations in the same function already use the kvcalloc()/
kvzalloc_objs() forms; switch this last one to kvmalloc_array() for
consistency and for the size_mul overflow check that kvmalloc_array()
performs.
The semantics are unchanged: kvmalloc_array() returns a non-zeroed
buffer, just like the previous kvmalloc() call. Existing callers of
buddy->miss_list initialise each list_head before use.
Signed-off-by: William Theesfeld <william@theesfeld.net>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260601193758.626537-1-william@theesfeld.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 850d9248d2.
This reapplies commit 325eb217e4 ("bnxt_en: bring back rtnl_lock()
in the bnxt_open() path").
Breno reports a lockdep warning in bnxt. During FW reset the driver
may end up calling netif_set_real_num_tx_queues() (if queue count
changes), so calls to bnxt_open() still require rtnl_lock.
net/sched/sch_generic.c:1416 suspicious rcu_dereference_protected() usage!
dev_qdisc_change_real_num_tx+0x54/0xe0
netif_set_real_num_tx_queues+0x4ed/0xa80
__bnxt_open_nic+0x9cb/0x3490
bnxt_open+0x1cb/0x370
bnxt_fw_reset_task+0x80d/0x1e80
process_scheduled_works+0x9c1/0x13b0
The reverted commit was just an optimization / experiment
so let's go back to taking the lock.
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/ah726OtFX-Qw3U-R@gmail.com
Fixes: 850d9248d2 ("Revert "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260603195845.2574426-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These fields are updated asynchronously by the bonding state machine
in ad_churn_machine() while holding bond->mode_lock.
bond_info_show_slave() and bond_fill_slave_info() read them without
bond->mode_lock being held, we need to add READ_ONCE() and
WRITE_ONCE() annotations.
Note that AD_CHURN_MONITOR, AD_CHURN, and AD_NO_CHURN are defined
exclusively in (kernel private) include/net/bond_3ad.h header.
They should be moved to include/uapi/linux/if_bonding.h or userspace
tools will have to hardcode their values.
Fixes: 4916f2e2f3 ("bonding: print churn state via netlink")
Fixes: 14c9551a32 ("bonding: Implement port churn-machine (AD standard 43.4.17).")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260603123514.388226-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .ndo_get_stats64 callback must not sleep because it can be
called when reading /proc/net/dev.
rtase_get_stats64() calls rtase_dump_tally_counter(), which polls
the tally counter dump bit with read_poll_timeout(). This may
sleep while waiting for the hardware counter dump to complete.
Use read_poll_timeout_atomic() instead to avoid sleeping in the
get_stats64() path.
Fixes: 0796004899 ("rtase: Implement net_device_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20260603061816.31356-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a VNI is re-added with the same attributes (e.g. same group or no
group), vxlan_vni_update() sends a spurious RTM_NEWTUNNEL notification
even though nothing changed.
The bug is that 'if (changed)' tests whether the pointer is non-NULL,
not the bool value it points to. Since every caller passes a valid
pointer, the condition is always true and the notification fires
unconditionally.
Fix by dereferencing the pointer: 'if (*changed)'.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100
# bridge vni add vni 1000 dev vxlan100 # spurious notification
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-3-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a new VNI is added to a vxlan device with vnifilter enabled,
no RTM_NEWTUNNEL notification is sent to userspace. This means
'bridge monitor vni' never shows VNI add events, even though
VNI delete events are reported correctly.
The bug is in vxlan_vni_add(), where the notification is guarded by
'if (changed)'. The 'changed' flag is set by vxlan_vni_update_group()
only when the multicast group or remote IP is modified, but for a
new VNI added without a group (e.g. in L3 VxLAN interface scenarios),
the function returns early without setting changed=true. Since this
is a new VNI, the notification should be sent unconditionally.
The notification is not guarded by the return value of
vxlan_vni_update_group() because, at this point, the VNI has already
been inserted into the hash table and list with no rollback on error.
The VNI will be visible in 'bridge vni show' regardless, so userspace
should be informed. This is consistent with vxlan_vni_del() which also
notifies unconditionally.
The 'if (changed)' guard remains correct in vxlan_vni_update(), which
handles the case where a VNI already exists and is being re-added --
there, we only want to notify if the group/remote actually changed.
Reproducer:
# ip link add vxlan100 type vxlan dstport 4789 local 10.0.0.1 \
nolearning external vnifilter
# ip link set vxlan100 up
# bridge monitor vni &
# bridge vni add vni 1000 dev vxlan100 # no notification
# bridge vni delete vni 1000 dev vxlan100 # notification received
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Reported-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-2-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtase_tx_clear() clears the TX ring and resets the ring indexes.
However, the TX queue state and BQL accounting are not reset at
the same time.
This may leave __QUEUE_STATE_STACK_XOFF asserted after
rtase_sw_reset(), preventing new TX packets from being scheduled.
Reset the TX subqueue when clearing the TX ring so the TX queue
state and BQL accounting are restored together.
Fixes: 5a2a2f1524 ("rtase: Implement the rtase_down function")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260602114659.12335-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the CPT-aware NIX channel mask in the npc_install_flow path so that
when the host PF installs steering rules in kernel for a VF used from
userspace (e.g. DPDK), MCAM entries see the same channel mask semantics as
other RX paths.
Fixes: 56bcef528b ("octeontx2-af: Use npc_install_flow API for promisc and broadcast entries")
Cc: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260602045853.1558530-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check.
Fixes: e2a7420df2 ("bonding/main: convert to using slave printk macros")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260601085649.4029067-1-zhaojinming@uniontech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In geneve_post_decap_hint the length used for adjusting the UDP checksum
should be 'skb->len - gro_hint->nested_tp_offset' (UDP length) instead
of 'skb->len - gro_hint->nested_nh_offset' (IP length).
Fixes: fd0dd79657 ("geneve: use GRO hint option in the RX path")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260521131436.748832-1-jhs%40mojatatu.com
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260529144713.780938-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dmaengine path shares ethtool_ops with the legacy AXI DMA path,
including .get_coalesce/.set_coalesce that poke XAXIDMA_*_CR_OFFSET
directly. In dmaengine mode lp->dma_regs is not mapped by axienet, so
those ethtool calls touch unmapped/unrelated memory and report values
unrelated to the channel actually in use.
.get_ringparam/.set_ringparam only touch lp->rx_bd_num/lp->tx_bd_num,
fields used only by the legacy path for BD ring sizing. In dmaengine
mode the descriptor ring is owned by the dmaengine provider and these
fields are not consulted, so reporting them is misleading.
No dmaengine API exists today to query or program either coalescing
or ring size on behalf of the client, so neither can be exposed
meaningfully in dmaengine mode.
Add axienet_ethtool_dmaengine_ops without the coalesce and ringparam
hooks. Also move the ethtool_ops assignment from early probe into the
if/else alongside netdev_ops, so the legacy and dmaengine paths pick
their respective ops in one place. No functional change for the
legacy DMA path.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260601124454.3384601-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some typos in comments and while they are harmless and not visible,
there is no reason not to fix them. Fix the ones that are not register related,
which might have intentional naming convention.
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Link: https://patch.msgid.link/20260601163727.554364-1-j.raczynski@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rx-copybreak requires an extra slab allocation. Since bnxt uses
page pool frags and HDS by default, the rx-copybreak doesn't
buy us anything. The extra pressure on slab causes overload
on pre-sheaves kernels on modern AMD platforms.
In synthetic testing on net-next this patch shows little difference
but I think copybreak is "obvious waste" at this point.
Default rx-copybreak threshold to 0 / disabled.
The "copybreak" defines are really the size bounds for the Rx header
buffer. Rename them.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260602003759.1545645-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed.
Fixes: 2d7605a729 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260602-airoha-mtk-metadata-uaf-fix-v1-2-3aaa99d83351@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed.
Fixes: af3cf757d5 ("net: airoha: Move DSA tag in DMA descriptor")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260602-airoha-mtk-metadata-uaf-fix-v1-1-3aaa99d83351@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
platform_get_irq() returns a negative errno on failure.
Commit a598f66d91 replaced irq_of_parse_and_map() (which returns 0
on failure) with platform_get_irq() but dropped the error check.
Without it, a negative IRQ number is passed to devm_request_irq(),
which fails with -EINVAL instead of propagating the real error
from platform_get_irq().
Add the missing error check and goto err_gone.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260601040201.103481-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- iwlwifi:
- FW reset handshake removal for older devices
- NIC access fix in fast resume
- avoid too large command for some BIOSes
- fix TX power constraints in AP mode
- cfg80211:
- fix netlink parse overflow
- fix potential 6 GHz scan memory leak
- enforce HE/EHT consistency to avoid mac80211 crash
- mac80211: guard radiotap antenna parsing
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmogEAgACgkQ10qiO8sP
aAD+jg//d9zDSJ7bBbDoNDgM2iTVlmaDR2Zri4Gjre16vNUwYYn0rvR1Z4auYQxT
SwwEP3yNRECsF56vh6RlX5a7rqVQFKl2X3RCaBZ1vrzHus+xVf1HuBt2dq2FGSIX
pxL8H/h34az3f+7FWHW5fgn6UjAZ47d18KzNp0yFlXYqSyimCrcDv9prneNCCac1
9AdeLvIGyax9cW9zFI7wAj26bibFrEWxgYnM8ZaNJeYYoJfoFAXi7DkqGryjIBI/
F1ENWTeaYNKa+8vdgpuknI40uVAQdKb/W5pP+fcj2AnO0hxUxItGbGrAuteAgq9b
BneVgLB/tbrejXz2W8n926FougVCnlXJoQ6W08M5J7ZppCNilpgkl2JH54hjeGi4
3UV3zusoeNqXM4yf0IOdfhSS5Rg8G7NSrDbAZClbsDOtLiFa1ic4keBodVS8umT4
Yspb4dZ2Akg30LUvLKJ40zFkKG6b825ZwKw3SgKnH+1abm8Kvco3VmFqjnVc7QSc
bOQCEUJovHgLR5AQF+UknGKbzNmWhdu6fWFJD805z0Z0VYtZT7O8MlnvRAB63i8B
iGnDZM9eq9BgIq4xPeTnDy2E2j20GoNMaR1F2JII2HI3njhYrL3mNbvGa2EoZqTT
6M1u5zXX6ydeNV0aP1lYF+ILikYFMTeMlQSBn5ejYELEm/RWvKg=
=nKth
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Things are finally quieting down:
- iwlwifi:
- FW reset handshake removal for older devices
- NIC access fix in fast resume
- avoid too large command for some BIOSes
- fix TX power constraints in AP mode
- cfg80211:
- fix netlink parse overflow
- fix potential 6 GHz scan memory leak
- enforce HE/EHT consistency to avoid mac80211 crash
- mac80211: guard radiotap antenna parsing
* tag 'wireless-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
wifi: fix leak if split 6 GHz scanning fails
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
wifi: nl80211: reject oversized EMA RNR lists
wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used
wifi: iwlwifi: mvm: avoid oversized UATS command copy
wifi: iwlwifi: mld: send tx power constraints before link activation
wifi: iwlwifi: mvm: don't support the reset handshake for old firmwares
====================
Link: https://patch.msgid.link/20260603113208.171874-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NPC mcam entry stores a mapping between mcam entry and target pcifunc.
During initialization of this field, API kmalloc_array has been used which
caused some junk values to array. Whereas, the array is expected to be
initialized by 0. This patch fixes the same by using kcalloc instead of
kmalloc_array.
Fixes: 55307fcb92 ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1780054625-17090-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On system reboot "rvu_nicpf 0002:03:00.0: NDC sync operation failed"
error messages are shown, even if the operations is successful.
This is due to wrong if error check in ndc_syc() function.
Fixes: 42c45ac141 ("octeontx2-af: Sync NIX and NPA contexts from NDC to LLC/DRAM")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1780054677-17249-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6,
to allow specifying a local IPv4/IPv6 address for the backend UDP
socket.
By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA)
is enabled, both IPv4 and IPv6 sockets are created. However, if a
source address is specified via the new attributes, only a single
socket corresponding to that specific address family is created.
Accordingly, geneve_find_sock() and geneve_find_dev() are updated to
take the source address into account, ensuring that multiple devices
and sockets configured with different source addresses can coexist
without conflict.
In addition, the source address is validated in geneve_xmit_skb()
and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key.
With this change, multiple GENEVE devices can be successfully created
and bound to their respective local IP addresses:
(*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6
# for i in $(seq 1 2);
do
ip link add geneve4_${i} type geneve local 192.168.0.${i} external
ip addr add 192.168.0.${i}/24 dev geneve4_${i}
ip link set geneve4_${i} up
ip link add geneve6_${i} type geneve local 2001:9292::${i} external
ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad
ip link set geneve6_${i} up
done
# ip -d l | grep geneve
9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.1 ...
10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::1 ...
11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.2 ...
12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::2 ...
# ss -ua | grep geneve
UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:*
UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:*
UNCONN 0 0 [2001:9292::2]:geneve *:*
UNCONN 0 0 [2001:9292::1]:geneve *:*
Note that even if the local address is explicitly configured with
the wildcard address, kernel does not dump it except for devices with
IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour
of is_tnl_info_zero(), which treats the wildcard remote address as not
configured.
## ynl example.
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do newlink --create \
--json '{"ifname": "geneve0",
"linkinfo": {"kind":"geneve",
"data": {"local": "0.0.0.0",
"collect-metadata": true}}}'
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do getlink \
--json '{"ifname": "geneve0"}' --output-json | \
jq .linkinfo.data.local
"0.0.0.0"
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When collect metadata mode (IFLA_GENEVE_COLLECT_METADATA) is
enabled, the GENEVE device creates both IPv4 and IPv6 sockets
and bind()s them to wildcard addresses.
The next patch allows creating only one socket bound to a
specific address even when the collect metadata mode is
enabled.
Then, we need a flag to distinguish dualstack GENEVE devices
to detect local address conflict.
Let's add the dualstack flag to struct geneve_config.
IFLA_GENEVE_COLLECT_METADATA processing is moved up in
geneve_nl2info() for the next patch to overwrite dualstack
to false while keeping collect_md true.
Note that IFLA_GENEVE_REMOTE and IFLA_GENEVE_REMOTE6 does not
set cfg->dualstack to false since is_tnl_info_zero() ignores
the wildcard remote address:
# ip link add geneve0 type geneve external remote 0.0.0.1
Error: Device is externally controlled, so attributes (VNI, Port, and so on) must not be specified.
# ip link add geneve0 type geneve external remote 0.0.0.0
# ss -ua | grep geneve
UNCONN 0 0 0.0.0.0:geneve 0.0.0.0:*
UNCONN 0 0 *:geneve *:*
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch to make a subsequent patch clean.
We will need to access geneve_dev->cfg.info.key.u.{ipv4,ipv6}.src
in geneve_find_sock() later and extend conditions there.
Let's pass down struct geneve from geneve_sock_add() to
geneve_find_sock() and flatten the conditional logic.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch to make a subsequent patch clean.
We will need to access geneve_dev->cfg.info.key.u.{ipv4,ipv6}.src
in geneve_create_sock() later.
Let's pass down struct geneve_dev from geneve_sock_add() to
geneve_create_sock() instead of individual config fields.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260602190436.139591-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
geneve_nl2info() calls ipv6_addr_type() to check if the remote
IPv6 address is link-local.
Then, it also calls ipv6_addr_is_multicast() for the same address.
Let's not call ipv6_addr_is_multicast() and reuse ipv6_addr_type().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260602190436.139591-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sfp->i2c_block_size is only assigned in sfp_sm_mod_probe(), which runs
from the state machine timer after SFP_F_PRESENT has been set. Between
those two points, sfp_module_eeprom() (the ethtool -m callback) gates
only on SFP_F_PRESENT and can be entered with i2c_block_size still at
its kzalloc'd value of 0.
On a pure-I2C adapter, sfp_i2c_read() then issues an i2c_transfer()
with msgs[1].len = 0 inside a loop that subtracts this_len from len
each iteration; on adapters that succeed a zero-length read the loop
never advances, spinning while holding rtnl_lock.
This was previously addressed by initializing i2c_block_size in
sfp_alloc() (commit 813c2dd786), but the initialization was dropped
when i2c_block_size was split from i2c_max_block_size.
Initialize sfp->i2c_block_size from sfp->i2c_max_block_size in
sfp_i2c_configure(), so the field is valid as soon as the adapter is
known. sfp_sm_mod_probe() still reassigns it on each module insertion
to recover from a per-module clamp to 1 (sfp_id_needs_byte_io).
Fixes: 7662abf4db ("net: phy: sfp: Add support for SMBus module access")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://patch.msgid.link/20260528205242.971410-2-jelonek.jonas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a subtle error with the memcpy here, where b44_gstrings should
not be dereferenced. Dereferening causes the following error with W=1:
In file included from drivers/net/ethernet/broadcom/b44.c:17:
In file included from ./include/linux/module.h:18:
In file included from ./include/linux/kmod.h:9:
In file included from ./include/linux/umh.h:4:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/powerpc/include/asm/preempt.h:5:
In file included from ./include/asm-generic/preempt.h:5:
In file included from ./include/linux/thread_info.h:23:
In file included from ./arch/powerpc/include/asm/current.h:13:
In file included from ./arch/powerpc/include/asm/paca.h:16:
In file included from ./include/linux/string.h:386:
./include/linux/fortify-string.h:578:4: error: call to
'__read_overflow2_field' declared with 'warning' attribute: detected read
beyond size of field (2nd parameter); maybe use>
578 | __read_overflow2_field(q_size_field, size);
| ^
Instead of fixing the memcpy, use ethtool_puts, which is the proper
helper for printing ethtool gstrings.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260531000334.388351-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change verify_num_vhca_ids() to count the number of unique vhca_ids
and verify this count doesn't exceed max_num_vhca_id, rather than
validating individual vhca_id values are within a specific range.
The previous implementation checked if each vhca_id was in the range
[0, max_num_vhca_id - 1], which is overly restrictive. The hardware
capability max_rqt_vhca_id represents the maximum number of unique
vhca_ids that can be used, not a range constraint on individual IDs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable TC flow steering for SD LAG mode by extending multiport
eligibility checks and peer flow handling.
SD LAG operates similarly to MPESW for TC offloads - flows on
secondary devices need peer flow creation on the primary, and
multiport forwarding rules are eligible when either MPESW or SD LAG
is active.
Add mlx5_lag_is_sd() helper to query SD LAG mode, and
mlx5_sd_is_primary() to identify the primary device. Redirect uplink
priv/proto_dev queries to the primary device's eswitch in SD
configurations.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With SD devices joining the LAG, peer flows are not created for all
devcom peers - SD devices skip peers that belong to a different SD
group. However, the delete path iterated all devcom peers
unconditionally, attempting to delete from slots that were never
populated.
Track which peer slots are populated using a bitmap in mlx5e_tc_flow.
The delete path now iterates only set bits, matching exactly the slots
that were set up during flow creation.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In SD switchdev mode, network device resources such as channels and
completion vectors must remain on the same PF rather than being
distributed across SD group members.
Modify mlx5_sd_ch_ix_get_dev_ix() to return 0 and
mlx5_sd_ch_ix_get_vec_ix() to return the channel index directly when
in switchdev mode, keeping resources local to the requesting PF.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SD devices are not compatible with multipath LAG since they use
dedicated SD LAG for cross-socket connectivity. Add an SD check
to the multipath prereq validation to prevent multipath LAG
activation on SD-configured ports.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket Direct devices manage their own LAG via SD LAG infrastructure.
Block the standard netdev-event-driven LAG path (RoCE LAG and VF LAG)
for SD devices to prevent conflicting LAG configurations.
Expose mlx5_sd_is_supported() as a public helper that encapsulates all
SD eligibility checks. Use it in mlx5_lag_dev_alloc() to skip netdev
notifier registration for SD-capable devices at alloc time. Some sd
code is reordered to expose the new function, no logic is changed.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Register SD secondary devices with the existing LAG structure by
adding them to the primary's ldev xarray with a shared group_id.
This ties the SD LAG lifecycle to the SD group lifecycle.
Add sd_lag_state debugfs entry for LAG state visibility. To avoid
race between this entry and LAG deletion, have debugfs creation
and deletion done last on SD init and first on SD cleanup.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a group_id parameter to mlx5_lag_shared_fdb_create() and
mlx5_lag_shared_fdb_destroy() to scope shared FDB operations to a
specific SD group.
When group_id is U32_MAX, the functions operate on all LAG devices. When
group_id is non-zero, they operate only on devices in that SD group
without issuing FW LAG commands, since SD LAG is a pure software
construct.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket Direct (SD) secondaries devices will participate in LAG, even
though they are silent. SD secondary devices share the same physical
port as their primary but are separate PCI functions that need to be
tracked alongside regular LAG ports.
Extend lag_func with a group_id field to identify SD group membership
and introduce a unified iterator that can filter by group. Add APIs
for registering SD secondary devices in an existing LAG.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace mlx5_eswitch_get_npeers() count-based check with a new
mlx5_eswitch_is_peer() function that directly verifies the peer
relationship between two eswitches.
This change prepares for SD LAG support, which is a virtual LAG that
does not have num_lag_ports capability and cannot use the count-based
peer validation.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the E-swtich devcom component management from TC layer to ESW
layer.
This refactoring places devcom lifecycle management at the appropriate
layer and prepares for SD LAG which needs devcom registration
independent of the TC/representor initialization.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch align the eswitch disable sequence with the
switchdev-to-legacy mode transition, where eswitch must be disabled
before device detachment. The consistent ordering is required for proper
SD LAG cleanup which depends on eswitch state during teardown.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor shared FDB LAG logic into a new lag/shared_fdb.c file to
improve code organization and enable reuse. Move shared FDB specific
functions from lag.c and introduce consolidated APIs:
- mlx5_lag_shared_fdb_create() handles LAG activation with shared FDB
- mlx5_lag_shared_fdb_destroy() handles LAG deactivation with shared FDB
Update mlx5_do_bond(), mlx5_disable_lag() and mpesw.c to use the new
APIs, which simplifies the shared FDB code paths.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This contains a few fixes:
- Don't grab nic access in non-fast-resume
- Don't send a large hcmd than transport supports
- In AP mode, don't send tx power constraints command before activating
the link
- Don't do sw reset handshake on older firmwares.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCahxB+wAKCRDacY7uyt+O
fbPvAQDUKxERZJuf0FezGx4Z17XyibqhCPlPLrxuCOiWR5OObAD8DZ7do7sSJx/P
r0r7rUfLW0eKkbQ/UthAhHx0jD7imgQ=
=J9uk
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-fixes-2026-05-31' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
wifi: iwlwifi: fixes - 2026-05-31
Miri Korenblit says:
====================
This contains a few fixes:
- Don't grab nic access in non-fast-resume
- Don't send a large hcmd than transport supports
- In AP mode, don't send tx power constraints command before activating
the link
- Don't do sw reset handshake on older firmwares.
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Calling hrtimer_start() on an already-active txtimer is unnecessary
and expensive. Skip the restart if the timer is already active by
adding an hrtimer_active() check before hrtimer_start().
Previously, each packet reset the timer to tx_coal_timer in the future,
acting as a sliding window that delayed NAPI under burst traffic. With
this change, an already-active timer is left to fire sooner, scheduling
NAPI within tx_coal_timer of the first packet and freeing TX descriptors
earlier.
There is no race concern: hrtimer_start() is internally serialized and
safe to call on an active timer. In the event of a race between
hrtimer_active() and hrtimer_start(), the worst case is calling
hrtimer_start() on an already-active timer, which is identical to the
pre-patch behaviour.
Performance on Cyclone V with dwmac-socfpga (iperf3 -u -b 0 -l 64):
Before: ~45200 pps
After: ~52300 pps (~15% improvement)
Additionally, ~10% improvement in UDP throughput observed on Agilex5,
with hrtimer CPU usage reduced from ~8% to ~0.6%.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260529064659.32287-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260528173452.1953102-6-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
