All drivers which may call *_get_link_ksettings() on ops-locked
devices from paths already holding the ops lock are ready now.
Make __ethtool_get_link_ksettings() take the ops lock, and assert
that it's held in netif_get_link_ksettings().
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__ethtool_get_link_ksettings() is exported and called from sysfs
and many drivers. It invokes ethtool_ops->get_link_ksettings
so by our own docs it should be holding netdev lock for ops locked
devices. Looks like commit 2bcf4772e4 ("net: ethtool:
try to protect all callback with netdev instance lock")
missed adding the ops lock here.
There's a number of callers we need to fix up so let's add the
netif_get_link_ksettings() helper first, without any actual
locking changes (this commit is a nop).
Not treating this as a fix because I don't think any driver cares
at this point, but if we want to remove the rtnl_lock protection
this will become critical.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FW module flashing was written so that the flashing happens
without holding rtnl_lock. This allows flashing multiple modules
at once. Current drivers can handle that well, but we should
let drivers depend on the netdev instance lock. Instance lock
is per netdev, and so is the module so we won't break parallel
updates.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub suggests renaming the existing assert to match
the netdev_lock_ops_compat() semantics.
We want netdev_assert_locked_ops() to mean - if the driver
is ops locked - check that it's holding the device lock.
The existing helper check for either ops lock or rtnl_lock,
which is the locking behavior of netdev_lock_ops_compat().
The reason for naming divergence is likely that
netdev_ops_assert_locked() predated the _compat() helpers.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_MSG_STRSET_GET is the only op which sets allow_nodev_do.
When no device is provided it dumps static tables, there's no
need to hold rtnl_lock for this.
Not taking rtnl_lock is a minor win in itself so I think this
patch stands on its own merits. Later on it will be useful
to do locking only in paths which have access to a netdev,
so that we can decide which locks to take per-netdev.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260527162522.3344231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All ethtool driver op calls should be sandwiched between
ethnl_ops_begin() / ethnl_ops_complete(). In Netlink eeprom code,
if the paged access failed we fall back to old API, but we
first call _complete() and the fallback never does its own
ethnl_ops_begin(). Move the fallback into the _begin() / _complete()
section.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strset_prepare_data() passes ETHTOOL_A_HEADER_FLAGS (3) as the header
attribute to ethnl_req_get_phydev(). This is incorrect, in the main
attr space 3 is ETHTOOL_A_STRSET_COUNTS_ONLY, not the request
header attr. The correct constant is ETHTOOL_A_STRSET_HEADER (1).
ethnl_req_get_phydev() only uses this value for the extack,
so this is not a "functionally visible"(?) bug.
Fixes: e96c93aa4b ("net: ethtool: strset: Allow querying phy stats by index")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsinfo_prepare_data() has two code paths: a "by-PHC" path for
user-specified hardware timestamping providers, and the old path.
Commit 89e281ebff ("ethtool: init tsinfo stats if requested") added
ethtool_stats_init() to mark stat slots as ETHTOOL_STAT_NOT_SET before
the driver callback populates them, but placed the call inside the
old-path block.
When commit b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to
support several hwtstamp by net topology") added the by-PHC early
return, it landed above the stats initialization. On that path
the stats array retains the zero-fill from ethnl_init_reply_data()'s
zalloc. This leads to the reply including a stats nest with four
zero-valued attributes that should have been absent.
Reject GET requests for stats with HWTSTAMP_PROVIDER or dump.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call
ethnl_ops_complete() before returning the error.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pse_prepare_data() is missing ethnl_ops_complete() if
ethnl_req_get_phydev() returned an error. Move getting
phydev up so that we don't have to worry about this
(similar order to linkstate_prepare_data()).
Note that phydev may still be NULL (this is checked in
pse_get_pse_attributes()), the goal isn't really to avoid
the _begin() / _complete() calls, only to simplify the error
handling.
While at it propagate the original error. Why this code
overrides the error with -ENODEV but !phydev generates
-EOPNOTSUPP is unclear to me...
Fixes: 31748765be ("net: ethtool: pse-pd: Target the command to the requested PHY")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linkstate_prepare_data() calls ethnl_req_get_phydev() before
ethnl_ops_begin(), but routes its error path through "goto out"
which calls ethnl_ops_complete().
Fixes: fe55b1d401 ("ethtool: linkstate: migrate linkstate functions to support multi-PHY setups")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A couple of trivial bugs in error handling in tsconfig_send_reply().
If we failed to allocate rskb we need to set the error.
If we did allocate it but failed to send it - we need to remember
to free it.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries).
Fixes: f750dfe825 ("ethtool: provide customized dim profile management")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cmis_fw_update_start_download() copies start_cmd_payload_size bytes
from the firmware blob into the CDB LPL vendor_data[] payload without
validating that the FW has enough data.
Since the start_cmd_payload_size can only be ~120B an image too short
is most likely corrupted, so reject it.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_cmis_cdb_compose_args() accepts msleep_pre_rpl as u16 but stores
it into the u8 field ethtool_cmis_cdb_cmd_args::msleep_pre_rpl, silently
truncating values >= 256. Seven of the nine call sites pass 1000 ms
(it's the third argument from the end).
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming.
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single Netlink socket issues MODULE_FW_FLASH_ACT against multiple
devices, ethnl_sock_priv_set() overwrites sk_priv->dev on each call,
retaining only the last one. The socket priv is used on socket close,
to walk the global work list and mark the uncompleted flashing work
as "orphaned". Otherwise if another socket reuses the PID it will
unexpectedly receive the flashing notifications.
Don't record the device, record net pointer instead. The purpose of
the dev is to scope the work to a netns, anyway. If we store netns
the overrides are safe/a nop since all flashed devices must be in
the same netns as the socket.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_set_module_validate() inspects module_fw_flash_in_progress
but validate is meant for _input_ validation, not state validation.
rtnl_lock is not held, yet. Move the check into ethnl_set_module().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reviewing other changes Gemini points out that we currently
update module_fw_flash_in_progress without holding any locks.
Since module_fw_flash_in_progress is part of a bitfield this
is not great, updates to other fields may be lost.
We could use a bool and sprinkle some READ_ONCE/WRITE_ONCE here
but seems like the issue is rather than the work is an unusual
writer. The other writers already hold the right locks. So just
very briefly take these locks when the work completes.
Note that nothing ever cancels the FW update work, so there's
no concern with deadlocks vs cancel.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We wait with filling the reply for new RSS context creation
until after the driver ->create_rxfh_context call. The driver
needs to fill some of the defaults in the context. The failure
of rss_fill_reply() is somewhat theoretical, but doesn't take
much effort to handle it properly. Call ->remove_rxfh_context().
If the driver's remove callback fails (some implementations like sfc
can return real command errors from firmware RPCs) - skip the xa_erase
and kfree, leaving the context in the xarray. This matches how
ethnl_rss_delete_doit() behaves.
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_get_data_alloc() allocates a single buffer that backs both the
indirection table and the hash key, but only assigned data->indir_table
when indir_size was nonzero. The expectation was that no driver
implements RSS without supporting indirection table but apparently
enic does just that (it's the only such in-tree driver).
enic has get_rxfh_key_size but no get_rxfh_indir_size.
data->indir_table stays as NULL, hkey gets set but rss_get_data_free()
kfree(data->indir_table) is a nop and the allocation leaks.
Always store the allocation base in data->indir_table so the free path
is unambiguous. No caller treats indir_table as a sentinel; everything
keys off indir_size.
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Link: https://patch.msgid.link/20260522230647.1705600-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation.
Fixes: 4f038a6a02 ("net: ethtool: Don't call .cleanup_data when prepare_data fails")
Link: https://patch.msgid.link/20260522230647.1705600-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_set_prep_indir() compares the new indirection table against the
current one to determine whether any update is needed. The memcmp
call passes data->indir_size as the length argument, but indir_size
is the number of u32 entries, not the byte count.
Fixes: c0ae03588b ("ethtool: rss: initial RSS_SET (indirection table handling)")
Link: https://patch.msgid.link/20260522230647.1705600-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remember to set ret before jumping out if someone tries
to delete a context on a device which doesn't support
contexts.
Fixes: fbe09277fa ("ethtool: rss: support removing contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gemini says that we're modifying the RSS_CREATE response skb.
I think it's right, the comment says that unicast() should
unshare the skb but I'm not entirely sure what I meant there.
netlink_trim() does a copy but only if skb is not well sized
(it's at least 2x larger than necessary for the payload).
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BUILD_BUG_ON() is evaluated at compile time. The same three checks
for __HWTSTAMP_TX_CNT, __HWTSTAMP_FILTER_CNT and __HWTSTAMP_FLAG_CNT
are already present earlier in this file (tsconfig_reply_size()).
Repeating them at the start of ethnl_set_tsconfig() does not
strengthen the guarantee; remove the redundant block there and
keep a single occurrence.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Link: https://patch.msgid.link/20260515032550.138572-1-zhaochenguang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ethnl_bitmap32_not_zero() should return true if some bit in [start, end)
is set:
- Fix inverted memchr_inv() sense: return true when the scan finds a
non-zero byte, not when the middle words are all zero.
- Return false for an empty interval (end <= start).
- When end is 32-bit aligned, indices in [start, end) do not include any
bits from map[end_word]; return false after earlier checks found no
non-zero data.
Fixes: 10b518d4e6 ("ethtool: netlink bitset handling")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Cc: stable@vger.kernel.org # 6.13.x
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260509215046.107157-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sizeof(u32) on the _RINGS_CQE_SIZE line is missing its closing
parenthesis, causing nla_total_size() to absorb the subsequent
_TX_PUSH and _RX_PUSH entries.
The resulting size estimate happens to be numerically identical
due to NLA alignment, so not treating this as a real fix.
But the nesting is wrong and misleading.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260508125412.189804-1-cuitao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netlink attribute length field nla_len is a __u16, which can only
represent values up to 65535 bytes. NICs with a large number of
statistics strings (e.g. mlx5_core with thousands of ETH_SS_STATS
entries) can produce a ETHTOOL_A_STRINGSET_STRINGS nest that exceeds
this limit.
When nla_nest_end() writes the actual nest size back to nla_len, the
value is silently truncated. This results in a corrupted netlink message
being sent to userspace: the parser reads a wrong (truncated) attribute
length and misaligns all subsequent attribute boundaries, causing decode
errors.
Fix this by using the new helper nla_nest_end_safe and error out if
the size exceeds U16_MAX.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-5-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to AF_XDP, do not allow queues in a physical netdev to be resized
by ethtool -L when they are leased. Cover channel resize paths (both
netlink and ioctl) to reject resizing when the queues would be affected.
Given we need to have different checks for RX vs TX, detangle the code into
a two-loop version rather than the range of new_combined + min(new_rx, new_tx)
to old_combined + max(old_rx, old_tx).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-5-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .parse_request() ethnl operation extracts the relevant attributes
from the netlink request to populate the private req_info.
By passing genl_info as a parameter to this callback, we can use
the GENL_REQ_ATTR_CHECK() macro to check for missing mandatory
parameters.
This macro has the advantage of returning a better error explanation
through the netlink_ext_ack struct.
Convert the eeprom ethnl code to this macro, as it's the only command
yet that has mandatory request parameters.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260323095833.136266-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core locks ctx->indir_size when an RSS context is created. Some
NICs (e.g. bnxt) change their indirection table size based on the
channel count, because the hardware table is a shared resource. This
forces drivers to reject channel changes when RSS contexts exist.
Add driver helpers to resize indirection tables:
ethtool_rxfh_indir_can_resize() checks whether the default context
indirection table can be resized.
ethtool_rxfh_indir_resize() resizes the default context table in
place. Folding (shrink) requires the table to be periodic at the new
size; non-periodic tables are rejected. Unfolding (grow) replicates
the existing pattern. Sizes must be multiples of each other.
ethtool_rxfh_ctxs_can_resize() validates all non-default RSS contexts
can be resized.
ethtool_rxfh_ctxs_resize() applies the resize.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-3-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track the number of indirection table entries the user originally
provided (context 0/default as well!).
Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is
redundant now that user_size captures the same information.
Add ethtool_rxfh_indir_lost() for drivers that must reset the
indirection table.
Convert bnxt and mlx5 to use it.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most local #include in the ethtool command handling is out of order,
with either :
#include "netlink.h"
#include "common.h"
or even :
#include "netlink.h"
#include "common.h"
#include "bitset.h"
One of the reasons is because bitset.h s lacking definitions for
nlattr, netlink_ext_ack, ETH_GSTRING_LEN, and types such as u32, bool,
etc.
Make bitset.h standalone by including <linux/ethtool.h> for
ETH_GSTRING_LEN, and <linux/netlink.h> for nlattr, netlink_ext_ack and
the rest.
While at it, take a pass on ethnl sources to re-order the local
includes :
- put them after the global includes
- add a newline between global and local includes
- alpha-sort the local includes
One notable exception is the cmis.h include, that needs definitions from
module_fw.h. Keep them in this order for now.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260319180555.1531386-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two parameters for drivers supporting Rx CQE coalescing /
descriptor writeback.
ETHTOOL_A_COALESCE_RX_CQE_FRAMES:
Maximum number of frames that can be coalesced into a CQE or
writeback.
ETHTOOL_A_COALESCE_RX_CQE_NSECS:
Max time in nanoseconds after the first packet arrival in a
coalesced CQE or writeback to be sent.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-2-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TX pause enabled, if a device is unable to pass packets up to the
stack (e.g., CPU is hanged), the device can cause pause storm. Given
that devices can have native support to protect the neighbor from such
flooding, such events need some tracking. This support is to track TX
pause storm events for better observability.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>