Commit graph

119,730 commits

Author SHA1 Message Date
David Vrabel
b63795fa3a uwb: dont tranmit identification IEs
The current identification IE doesn't include any useful information
(the vendor ID is from the EUI-48) and it causes problems with certain
hardware/firmware so don't transmit one.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:34 +01:00
Anderson Lizardo
b5784f10d5 uwb: i1480/GUWA100U: fix firmware download issues
IOGear firmware versions >= 1.4.12224 fail to be downloaded because of a
spurious (and harmless) RCEB received after the download notification. This
patch handles this RCEB and keeps compatibility with future versions that might
not emit this RCEB.

i1480_rceb_check() is reused to check for the RCEB. It is also refactored with
improved comments and reused in another place in mac.c where the checking was
being duplicated.

This patch was tested on both i1480 and GUWA100U HWAs, with all firmware
versions currently available.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
2008-09-17 16:54:34 +01:00
Anderson Lizardo
8c7e8cb855 uwb: i1480: remove MAC/PHY information checking function
Some hardware/firmware combinations (most notably an IOGear HWA using the i1480
firmware) kill the host controller after issuing a GET_MAC_PHY_INFO command.
Removing this check seems harmless otherwise.

The patch fixes the issue where the HC is killed, showing the message:

ehci_hcd 0000:00:1d.7: HC died; cleaning up

After this error, USB comes back only after reloading the ehci_hcd module.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:34 +01:00
Anderson Lizardo
fa21183326 uwb: add Intel i1480 HWA to the UWB RC quirk table
The Intel i1480 HWA uses WHCI commands/events even though reporting itself as
WUSB compliant. This patch fixes this by marking it with the
WUSB_QUIRK_WHCI_CMD_EVT flag, which disables WUSB command/event filtering.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:33 +01:00
Anderson Lizardo
e477a4982f uwb: disable command/event filtering for D-Link DUB-1210
The D-Link DUB-1210 HWA uses commands and events from the WHCI specification,
although reporting itself as WUSB compliant. Therefore, we disable WUSB
command/event filtering for it.

USB_DEVICE_AND_INTERFACE_INFO is used for matching only the RC interface.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:33 +01:00
David Vrabel
9d53b1bebe uwb: initialize the debug sub-system
Call uwb_dbg_init() so the debugfs files are accessible.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:33 +01:00
Anderson Lizardo
9d839477f8 uwb: Fix handling IEs with empty IE data in uwb_est_get_size()
A DRP notification may sometimes have empty IE data. This patch fixes
uwb_est_get_size() so that this case is handled properly.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:32 +01:00
Anderson Lizardo
b0a81328c2 wusb: fix bmRequestType for Abort RPipe request
WUSB 1.0 (Table 8-4) mentions that Abort RPipe requests must have bmRequestType
equal to 0x25, although current implementation sets bmRequestType to 0xa5. This
patch fixes this typo.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:32 +01:00
Anderson Lizardo
f51c23baed wusb: fix error path for wusb_set_dev_addr()
Error path for wusb_set_dev_addr() was handled incorrectly. Fix it by
considering error only when return value is negative.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:32 +01:00
Inaky Perez-Gonzalez
d09318b8ab wusb: add HWA host controller driver
Add a driver for Wireless USB host controllers connected via USB (a
Host Wire Adapter or HWA).

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
Inaky Perez-Gonzalez
df3654236e wusb: add the Wire Adapter (WA) core
Common code for supporting Host Wire Adapters and Device Wire Adapters.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
David Vrabel
7e6133aa42 wusb: WHCI host controller driver
A driver for Wireless USB host controllers that comply with the
Wireless Host Controller Interface (HCI) specification as published by
Intel.

The latest publically available version of the specification (0.95) is
supported (except for isochronous transfers).

Build fixes by Randy Dunlap <rdunlap@xenotime.net>

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
Inaky Perez-Gonzalez
870d539504 wusb: add the USB wusb-cbaf driver
Add a driver for cable based associated of (Wireless) USB devices.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:30 +01:00
Greg Kroah-Hartman
470cc41503 wusb: add the Wireless USB core (build-system)
Add the WUSB build system (Kconfig and Kbuild) files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:30 +01:00
Inaky Perez-Gonzalez
d59db761b8 wusb: add the Wireless USB core (security)
Add the WUSB security (authentication) code.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:30 +01:00
Inaky Perez-Gonzalez
b69fada68b wusb: add the Wireless USB core (protocol)
Add the WUSB protocol (MMC management and device connection) code.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:29 +01:00
Inaky Perez-Gonzalez
90ff96f224 wusb: add the Wireless USB core
Add support for Ceritified Wireless USB 1.0 to the USB stack.

This has been split into several patches for easier review.

core (this patch):
  - host controller infrastructure
  - cluster reservation
  - UWB PAL registration
  - fake root hub

protocol:
  - MMC management (start/stop, managing IEs)
  - device connection

security:
  - device authentication and authorization

build-system:
  - Kconfig and Kbuild files

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:29 +01:00
Inaky Perez-Gonzalez
c7f736484f wusb: add the Wireless USB include files.
Common header files derived from the WUSB 1.0 specification.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:29 +01:00
Inaky Perez-Gonzalez
a21b963aa4 uwb: add the i1480 WLP driver
Add the driver for the WLP capability of the Intel i1480 device.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:28 +01:00
Inaky Perez-Gonzalez
1ba47da527 uwb: add the i1480 DFU driver
Add the driver for downloading the firmware to an Intel i1480 device.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:28 +01:00
Greg Kroah-Hartman
3b0c5a3818 uwb: add WiMedia LLC Protocol (build system)
Add the WLP build system (Kconfig and Kbuild files).

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:28 +01:00
Reinette Chatre
2f19204480 uwb: add WiMedia LLC Protocol stack (WSS)
Add the Wireless Service Set (WSS) code.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:27 +01:00
Reinette Chatre
e377e9d32d uwb: add WiMedia LLC Protocol stack (messages)
Add the WLP message formatting/decoding code.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:27 +01:00
Reinette Chatre
f51448543f uwb: add the WiMedia LLC Protocol stack
Add the generic code for the WiMedia Logical Link Control Protocol (WLP).

This has been split into several patches for easier review.

core (this patch):
  - everything else

messages:
  - WLP message construction/decode

wss:
  - Wireless Service Set support

build-system:
  - Kconfig and Kbuild files

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:27 +01:00
Inaky Perez-Gonzalez
de520b8bd5 uwb: add HWA radio controller driver
Add a driver for USB-connected UWB radio controllers (HWAs).

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:26 +01:00
Inaky Perez-Gonzalez
b6e069830c uwb: add whc-rc radio control driver
Add the driver for WHCI radio controllers.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:26 +01:00
David Vrabel
8f1b678ab9 uwb: add the driver to enumerate WHCI capabilities
This enumerates the capabilties of a WHCI device, adding a umc device for
each one.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:26 +01:00
David Vrabel
da389eac31 uwb: add the umc bus
The UMC bus is used for the capabilities exposed by a UWB Multi-interface
Controller as described in the WHCI specification.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:25 +01:00
Greg Kroah-Hartman
2f86c3e67d uwb: add the UWB stack (build system)
The Kbuild and Kconfig files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:25 +01:00
David Vrabel
599e8d80a2 uwb: add the UWB stack (debug support)
Add various debugfs files, principaly for the reservation manager.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:25 +01:00
David Vrabel
8cc13a0947 uwb: add the UWB stack (reservation manager)
DRP and reservation management.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:24 +01:00
Inaky Perez-Gonzalez
22d203ecef uwb: add the UWB stack (MLME)
Most of the MAC Layer Management Entity (MLME) support: address, beacon, IE
and scan management.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:24 +01:00
Inaky Perez-Gonzalez
0612edfd95 uwb: add the UWB stack (radio controller interface)
Add the UWB radio controller interface (URCI) support.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:24 +01:00
Inaky Perez-Gonzalez
183b9b592a uwb: add the UWB stack (core files)
UWB device and radio controller device and event management.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:23 +01:00
Inaky Perez-Gonzalez
34e95e41f1 uwb: add the uwb include files
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:23 +01:00
Inaky Perez-Gonzalez
99d368bc9e uwb: add initial documentation
Documentation (and example utilities) for the UWB (and WUSB) stacks.

Some of the documentation may be out-of-date.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:23 +01:00
David Vrabel
ccbe329bcd bitmap: add bitmap_copy_le()
bitmap_copy_le() copies a bitmap, putting the bits into little-endian
order (i.e., each unsigned long word in the bitmap is put into
little-endian order).

The UWB stack used bitmaps to manage Medium Access Slot availability,
and these bitmaps need to be written to the hardware in LE order.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:22 +01:00
Paul Mundt
2194478157 sh: HAVE_IOREMAP_PROT depends on MMU.
HAVE_IOREMAP_PROT enables an unconditional reference to
generic_access_phys(), which remains undefined in the nommu case.
As there's no point in supporting this there anyways, simply fix
up the dependency.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:26:44 +09:00
Paul Mundt
b406efefd5 sh: Fix up headers_check regression.
linux/mmzone.h isn't exported, kill it off from asm/setup.h and simply
deal with it in the places that have a dependency instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:24:59 +09:00
Paul Mundt
81b669952e sh: Consolidate struct sh_cpuinfo definitions across _32/_64 split.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:24:02 +09:00
Paul Mundt
8a80a5e9e8 sh: Fix up signal_64 conflicting handle_signal() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:14:36 +09:00
Paul Mundt
b85641bdde sh: Make memory hot-add and hot-remove depend on MMU.
Cleans up link numerous build issues with page migration and so on when
enabled on nommu builds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:13:27 +09:00
Paul Mundt
b3d765f5df sh: Fix up fpu emu build.
The addition of the kprobes code pushed down a variable declaration,
clean it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:12:11 +09:00
Uwe Kleine-König
fbdbf70993 x86, debug: gpio_free might sleep
According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This patch changes the gpio_free implementations for the x86
architecture.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-17 14:58:46 +02:00
Adrian Hunter
6e14968c86 UBIFS: remove incorrect assert
The assert was not valid because one of the variables
'taken_empty_lebs' has transient values out of sync
with the other variables.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-09-17 14:47:09 +03:00
Adrian Hunter
6dcfac4f13 UBIFS: TNC / GC race fixes
- update GC sequence number if any nodes may have been moved
even if GC did not finish the LEB
- don't ignore error return when reading

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-09-17 14:23:26 +03:00
Arjan van de Ven
90f7d25c6b x86: print DMI information in the oops trace
in order to diagnose hard system specific issues, it's useful to
have the system name in the oops (as provided by DMI)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-17 11:53:03 +02:00
David Brownell
7bff3c4ce4 ARM: DaVinci: evm sets up many devices
Update DaVinci EVM board setup to work with key drivers which are
now in mainline kernels:

 - I2C adapter (driver: i2c_davinci)
    * three gpio expanders (driver: pcf8574) used for
       - LEDs
       - audio codec control
       - misc device control (including USB VBUS, IDE-vs-CF)
    * at24 (driver: at24) eeprom
 - USB controller (driver: musb_hdrc)
 - IDE controller (driver: palm_bk3710)

This board is the first in-tree client for a number of those drivers,
and adding this board support means the EVM board can be used for some
"real work" ... excepting "DaVinci Technology" video and DSP support
(also available in most OMAP3 chips).

Also renames the flash as "evm_norflash", since NAND may be jumpered.

(Patch contains work by myself, Kevin Hilman, Sergei Shtylyov.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Sergei Shtylyov  <sshtylyov@ru.mvista.com>
2008-09-17 00:31:42 -07:00
David Brownell
cece6e5af2 ARM: DaVinci: usb setup
Declare the musb_hdrc platform device for DaVinci.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-09-17 00:31:42 -07:00
Komal Shah
d395e6ad98 ARM: DaVinci: i2c setup
Davinci I2C initialization infrastructure; will be used by EVM init.

[ dbrownell@users.sourceforge.net: pass platform data into init code ]

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2008-09-17 00:31:42 -07:00