- to be correct wrt to end ranges
- to be optimal with a one-instruction hardware loop
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
probe_irq_off() is disfunctional as the local nr_irqs is referenced
instead of the global one for the for_each_irq_desc() iterator.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no need for irq_desc here. Even for sparse_irq we can
handle this clever in for_each_irq_nr().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
show_interrupts() and proc helpers are basically the same for
32 and 64 bit. Move them to a shared source file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The sparseirq patches introduced some more ugliness in show_interrupts().
Clean it up all together and make the code easier to read by splitting out
the "tail" function which prints the special interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Revert the sparse irq changes in m68k/s390/sparc and just define
nr_irqs as NR_IRQS for those architectures.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use APIC_DIVISOR being set to 16 for both 32/64bit
mode. To escape APIC timer underflow during calibration
set it to the maximum possible value.
Also typo error (CONFG instead of proper CONFIG) fixed.
The error was caught by Venkatesh Pallipadi, thanks a lot Venkatesh!
See details on http://lkml.org/lkml/2008/10/9/425
Reported-by: Venkatesh Pallipad <venkatesh.pallipadi@intel.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create /sys/firmware/sgi_uv sysfs entries for partition_id and coherence_id.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a bios call to return partitioning related info.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the EFI callback function and associated wrapper code.
Initialize SAL system table entry info at boot time.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Look for a UV entry in the EFI tables.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/uv_irq.c: In function 'uv_ack_apic':
arch/x86/kernel/uv_irq.c:26: error: implicit declaration of function 'ack_APIC_irq'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the below compile warnings due to recent HPET MSI changes
arch/x86/kernel/hpet.c:48: warning: 'hpet_devs' defined but not used
arch/x86/kernel/hpet.c:50: warning: 'per_cpu__cpu_hpet_dev' defined but not used
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arjan van de Ven noticed that we changed IRQ numbers from decimal
to hex in /proc/interrupts - that can break user-space utilities
like irqbalanced.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
when SPARSE_IRQ is not used, should still use irq_desc->lock
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix problem caused by reordering of the calls to uv_cpu_init() &
uv_system_init. Originally, uv_cpu_init() was called AFTER uv_system_init.
This order was recently broken as a side-effect of other patches.
With this patch, initialization of cpu 0 is now done by the system_init
call.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Interrupt remapping could lead to NULL dereference in case of
kzalloc failed and memory leak in other way. So fix the
both cases.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Noonan reported a boot hang when using irqpoll and
CONFIG_HAVE_SPARSE_IRQ=y.
The irqpoll loop needs to be updated to not iterate from 1 to nr_irqs
but to iterate via for_each_irq_desc(). (in the former case desc can
be NULL which crashes the box)
Reported-by: Steven Noonan <steven@uplinklabs.net>
Tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we don't have CONFIG_X86_PM_TIMER=y compiler warns about
unused variables. Move PM timer based calibration into a
separate function and make the code cleaner and the compiler
happy as well.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On 82489DX we don't have ESR register so we should not
write it.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... and tidy up the printouts. Suggested by Andrew Morton.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace __DO_ACTION macro with io_apic_modify_irq function.
This allow us to 'grep' definitions being hided by
__DO_ACTION macro:
__unmask_IO_APIC_irq
__mask_IO_APIC_irq
__mask_and_edge_IO_APIC_irq
__unmask_and_level_IO_APIC_irq
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
