swap test for "ip" with "conntrack", former is already accounted for
via setup_ns helper. Also switch to bash.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-8-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While at it, address warnings generated by shellcheck and fix following
minor issues:
- some distros place netem in 'extra' modules package, so add a skip check for netem-attach
failure.
- tc prints a warning for the 100mbit class:
"Warning: sch_htb: quantum of class 10001 is big. Consider r2q change."
Silence this by increasing the divisor.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-7-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace nc with socat. Too many different implementations of nc
are around with incompatible options ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-6-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only relevant change is that netns names have random suffix names,
i.e. its safe to run this in parallel with other tests.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-5-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also, fix two issues reported by Pablo Neira:
1. Must modprobe br_netfilter in case its not loaded,
else sysctl cannot be set.
2. ping for netns4 fails if rp_filter is enabled in bridge netns,
so set all and default to 0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-4-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Doing so gets us dynamically generated netns names.
Also:
* do not assume rp_filter is disabled, if its on script failed
* reduce timeout (-W) for "expected to fail" ping commands
* don't print PASS line for basic sanity ping
* shellcheck cleanups
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
.. so this can start re-using existing lib.sh infra in next patches.
Several of these scripts will not work, e.g. because they assume
rp_filter is disabled, or reliance on a particular version/flavor
of "netcat" tool.
Add config settings for them.
nft_trans_stress.sh script is removed, it also exists in the nftables
userspace selftests. I do not see a reason to keep two versions in
different repositories/projects.
The settings file is removed for now:
It was used to increase the timeout to avoid slow scripts from getting
zapped by the 45s timeout, but some of the slow scripts can be sped up.
Re-add it later for scripts that cannot be sped up easily.
Update MAINTAINERS to reflect that future updates to netfilter
scripts should go through netfilter-devel@.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper chk_msk_info() to show the counters in
mptcp_info of the given info, and check that the timestamps move
forward. Use it to show newly added last_data_sent, last_data_recv
and last_ack_recv in mptcp_info in chk_last_time_info().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240410-upstream-net-next-20240405-mptcp-last-time-info-v2-2-f95bd6b33e51@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it is possible to configure FIB rules
that match on iif / oif being a l3mdev port. It was not possible before
as these parameters were reset to the ifindex of the l3mdev device
itself prior to the FIB rules lookup.
Add tests that cover this functionality as it does not seem to be
covered by existing ones and I am aware of at least one user that needs
this functionality in addition to the one mentioned in [1].
Reuse the existing FIB rules tests by simply configuring a VRF prior to
the test and removing it afterwards. Differentiate the output of the
non-VRF tests from the VRF tests by appending "(VRF)" to the test name
if a l3mdev FIB rule is present.
Verified that these tests do fail on kernel 5.15.y which does not
include the previously mentioned commit:
# ./fib_rule_tests.sh -t fib_rule6_vrf
[...]
TEST: rule6 check: oif redirect to table (VRF) [FAIL]
[...]
TEST: rule6 check: iif redirect to table (VRF) [FAIL]
# ./fib_rule_tests.sh -t fib_rule4_vrf
[...]
TEST: rule4 check: oif redirect to table (VRF) [FAIL]
[...]
TEST: rule4 check: iif redirect to table (VRF) [FAIL]
[1] https://lore.kernel.org/netdev/20200922131122.GB1601@ICIPI.localdomain/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240409110816.2508498-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/lib/py/nsim.py already contains the most useful parts
of the netdevsim wrapper classes. Reuse them.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Non-ancient ip (iproute2-5.15.0, libbpf 0.7.0) refuses to load
the sample with maps because we don't generate BTF:
libbpf: BTF is required, but is missing or corrupted.
ERROR: opening BPF object file failed
Enable BTF by adding -g to clang flags. With that done
neither of the programs load:
libbpf: prog 'func': error relocating .BTF.ext function info: -22
libbpf: prog 'func': failed to relocate calls: -22
libbpf: failed to load object 'ksft-net-drv/net/sample_ret0.bpf.o'
Andrii explains that this is because we don't specify
section names for the code. Add the section names, too.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maps are removed asynchronously. Either there's a bigger delay
now or the test has always been flaky. Retry waiting in the loop.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're building more python tests on the netdev side, and some
of the classes from the venerable BPF offload tests can be reused.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use of the CPU MSR driver is now optional.
Perf is now preferred for many counters.
Non-root users can now execute turbostat, though with limited function.
Add counters for some new GFX hardware.
Minor fixes.
-----BEGIN PGP SIGNATURE-----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=oucB
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Use of the CPU MSR driver is now optional
- Perf is now preferred for many counters
- Non-root users can now execute turbostat, though with limited
functionality
- Add counters for some new GFX hardware
- Minor fixes
* tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits)
tools/power turbostat: v2024.04.10
tools/power/turbostat: Add support for Xe sysfs knobs
tools/power/turbostat: Add support for new i915 sysfs knobs
tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
tools/power/turbostat: Fix uncore frequency file string
tools/power/turbostat: Unify graphics sysfs snapshots
tools/power/turbostat: Cache graphics sysfs path
tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX
tools/power turbostat: Add selftests
tools/power turbostat: read RAPL counters via perf
tools/power turbostat: Add proper re-initialization for perf file descriptors
tools/power turbostat: Clear added counters when in no-msr mode
tools/power turbostat: add early exits for permission checks
tools/power turbostat: detect and disable unavailable BICs at runtime
tools/power turbostat: Add reading aperf and mperf via perf API
tools/power turbostat: Add --no-perf option
tools/power turbostat: Add --no-msr option
tools/power turbostat: enhance -D (debug counter dump) output
tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read
tools/power turbostat: Read base_hz and bclk from CPUID.16H if available
...
Much of turbostat can now run with perf, rather than using the MSR driver
Some of turbostat can now run as a regular non-root user.
Add some new output columns for some new GFX hardware.
[This patch updates the version, but otherwise changes no function;
it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.
Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.
Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* add stubs to functions that calls to them were recently added to memblock
but they were missing in tests
* update gfp_types.h to include bits.h so that BIT() definitions won't
depend on other includes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmYTgQ4QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kas7CACU1P6gzbtsz9w1YcJtElowyvQ22dhVO918
Iu9Y95QkFrJHnKVjrGiIlZVi3Mt0c3xvYm8D16ik3CRvBbLkvGdPGeo7kKeZrF8j
RvicmSjJduEsiPceCy4+bcFjQx0P3JQ6jKtYwJj21kJrV2j1T3Qob1KVjEmJt+h0
xcphdyXW1bjU+EgZyEka5ct0nYUDP+a9DwUETFxG+s/Cnp5SMprZHjsdXormHx4j
8QyU+P916wWmzEtWlLY4yLhe6849Rx9Cse8E8ViWqwxfIZELJ97A5qvHwD9dHCOX
8oZHzRgUslKoSJWutkjYHeOtB7kDhv1l+KZYOYbC4XE7WUooQs/O
=CVgG
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fix build errors in memblock tests:
- add stubs to functions that calls to them were recently added to
memblock but they were missing in tests
- update gfp_types.h to include bits.h so that BIT() definitions
won't depend on other includes"
* tag 'fixes-2024-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix undefined reference to `BIT'
memblock tests: fix undefined reference to `panic'
memblock tests: fix undefined reference to `early_pfn_to_nid'
Now there are only a few of variables are not using double quotes.
Modifying them, then "shellcheck disable=SC2086" can be dropped.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds '-i' option for mptcp_sockopt.sh, pm_netlink.sh, and
simult_flows.sh, to use 'ip mptcp' command in the tests instead of
'pm_nl_ctl'. Update usage() correspondingly.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use those newly added pm_nl endpoint ops helpers to replace all 'pm_nl_ctl'
commands with 'limits', 'add', 'del', 'flush', 'show' and 'set' arguments
in scripts mptcp_sockopt.sh and simult_flows.sh.
In pm_netlink.sh, add wrappers of there helpers to make the function names
shorter. Then use the wrappers to replace all 'pm_nl_ctl' commands.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports six endpoint operation helpers with pm_nl_ prefix,
pm_nl_set_limits(), pm_nl_add_endpoint(), pm_nl_del_endpoint(),
pm_nl_flush_endpoint(), pm_nl_show_endpoints() and pm_nl_change_endpoint()
into mptcp_lib.sh as public functions, and renamed each of them with a
mptcp_lib_ prefix. Then these old pm_nl_ prefix helpers in mptcp_join.sh
can be wrappers of mptcp_lib_ prefix ones.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses 'case' statements to simplify pm_nl_add_endpoint() and
pm_nl_check_endpoint(). And simplify pm_nl_check_endpoint() with
check_output() helper. Also update pm_nl_del_endpoint() to avoid the
'double quote' shellcheck warning.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The output formats of 'ip mptcp' commands are much different from that
of 'pm_nl_ctl' commands.
A new 'change_address' helper is added here, to change the flag of an
address. This is a bit similar to mptcp_join.sh's pm_nl_change_endpoint().
Usage:
Address ID - pm_nl_change_endpoint $ns id $id $flags
IP address - change_address $ns $addr $flags
Use this new helper in pm_netlink.sh to replace all 'pm_nl_ctl set'
commands.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The output formats of 'ip mptcp' commands are much different from that
of 'pm_nl_ctl' commands.
This patch adds a new helper format_endpoints() to format the outputs of
'ip mptcp' and 'pm_nl_ctl' with 'endpoints' arguments to hide these
differences.
A new helper named get_endpoint() has also been added to show a specific
endpoint identified by the given address ID, similar to mptcp_join.sh's
pm_nl_show_endpoints() helper, but showing all entries.
Use these two helpers in mptcp_join.sh and pm_netlink.sh to replace all
'pm_nl_ctl get' commands and outputs of 'pm_nl_ctl dump/get'.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The output format of 'ip mptcp limits' command is much different from
that of 'pm_nl_ctl limits' command.
This patch adds format_limits() helper to format the outputs of these
two commands to hide the difference. get_limits() has been added to show
the limits.
Use these two helpers in pm_netlink.sh to replace all 'pm_nl_ctl limits'
commands and outputs.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports ip_mptcp into mptcp_lib.sh as a public variable,
named MPTCP_LIB_IP_MPTCP. Add a helper mptcp_lib_set_ip_mptcp() to set
it, and a helper mptcp_lib_is_ip_mptcp() to test whether it is set. Use
these two helpers in mptcp_join.sh.
This patch is prepared for coming commits.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or
1 millisecond. This patch explicitly adds millisecond units to make these
commands clearer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tc are used in some test scripts: mptcp_connect.sh, mptcp_join.sh and
simult_flows.sh. It makes sense to check if tc is installed before running
these scripts, just like other tools. So this patch add 'tc' check for
mptcp_lib_check_tools(), and check it in these test scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a very simple test to make sure drivers report expected
stats. Drivers which implement FEC or pause configuration
should report relevant stats. Qstats must be reported,
at least packet and byte counts, and they must match
total device stats.
Tested with netdevsim, bnxt, in-tree and installed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add drivers/net as a target for mixed-use tests.
The setup is expected to work similarly to the forwarding tests.
Since we only need one interface (unlike forwarding tests)
read the target device name from NETIF. If not present we'll
try to run the test against netdevsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a trivial test using YNL.
$ ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..2
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
Instantiate the family once, it takes longer than the test itself.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add glue code for accessing the YNL library which lives under
tools/net and YAML spec files from under Documentation/.
Automatically figure out if tests are run in tree or not.
Since we'll want to use this library both from net and
drivers/net test targets make the library a target as well,
and automatically include it when net or drivers/net are
included. Making net/lib a target ensures that we end up
with only one copy of it, and saves us some path guessing.
Add a tiny bit of formatting support to be able to output KTAP
from the start.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add binary and integer sub-type support for indexed-array to display bond
arp and ns targets. Here is what the result looks like:
# ip link add bond0 type bond mode 1 \
arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'
"arp-ip-target": [
"192.168.1.1",
"192.168.1.2"
],
[...]
"ns-ip6-target": [
"2001::1",
"2001::2"
],
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a couple of fixups for this cycle's vmalloc changes and one for
the stackdepot changes. And a fix for a very old x86 PAT issue which can
cause a warning splat.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZhBEXAAKCRDdBJ7gKXxA
ju9fAQCxPdqApKQ49IAJpUtMcRJmI594dmB+/CfrFgiS+GaQcwEA1+2SidI9fQWT
R/fcKrRr4+zlgQw0T0aSDR1HBLUPxw0=
=rkxT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"8 hotfixes, 3 are cc:stable
There are a couple of fixups for this cycle's vmalloc changes and one
for the stackdepot changes. And a fix for a very old x86 PAT issue
which can cause a warning splat"
* tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
stackdepot: rename pool_index to pool_index_plus_1
x86/mm/pat: fix VM_PAT handling in COW mappings
MAINTAINERS: change vmware.com addresses to broadcom.com
selftests/mm: include strings.h for ffsl
mm: vmalloc: fix lockdep warning
mm: vmalloc: bail out early in find_vmap_area() if vmap is not init
init: open output files from cpio unpacking with O_LARGEFILE
mm/secretmem: fix GUP-fast succeeding on secretmem folios
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of
the newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT"
with better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting
to some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing problems,
incorrect checksum conversions, and incorrect packet transformations
which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6bQI
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
