If the server sends a NFS4ERR_DELAY, then allow the caller to retry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Both close and delegreturn have identical code to handle pNFS
return-on-close. This patch refactors that code and places it
in pnfs.c
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add 3.3V and 12V supplies regulators information of x16 PCIe slot in
p2972-0000 platform which is owned by C5 controller and also enable C5
controller.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Add support to configure PCIe C5's sideband signals PERST# and CLKREQ#
as output and bi-directional signals respectively which unlike other
PCIe controllers sideband signals are not configured by default.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Add support to get regulator information of 3.3V and 12V supplies of a PCIe
slot from the respective controller's device-tree node and enable those
supplies. This is required in platforms like p2972-0000 where the supplies
to x16 slot owned by C5 controller need to be enabled before attempting to
enumerate the devices.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Add support to configure sideband signal pins when the information is
present in the respective controller device-tree node.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: fold in YueHaibing's fix for build error without CONFIG_PINCTRL;
https://lore.kernel.org/r/20190920014807.38288-1-yuehaibing@huawei.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.
Fixes: 1c5bd76d17 ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This check has been hanging out since we used to have parallel paths to add
dentry in nfs_create(), but that hasn't been the case for some years.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit b0c6108ecf ("nfs_instantiate(): prevent multiple aliases for
directory inode"), nfs_instantiate() may succeed without actually
instantiating the dentry that was passed in. That can be problematic for
some callers in NFSv3, so this patch breaks things up so we can get the
actual dentry obtained.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the congestion window closes just as the transport disconnects,
a reconnect is never driven because:
1. The XPRT_CONG_WAIT flag prevents tasks from taking the write lock
2. There's no wake-up of the first task on the xprt->sending queue
To address this, clear the congestion wait flag as part of
completing a disconnect.
Fixes: 75891f502f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the copy of the RPC reply into our buffers did not complete, and
we could end up with a truncated message. In that case, just resend
the call.
Fixes: a0584ee9ae ("SUNRPC: Use struct xdr_stream when decoding...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Let the name reflect the single use. The function now assumes the GSS MIC
is the last object in the buffer.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The GSS Message Integrity Check data for krb5i may lie partially in the XDR
reply buffer's pages and tail. If so, we try to copy the entire MIC into
free space in the tail. But as the estimations of the slack space required
for authentication and verification have improved there may be less free
space in the tail to complete this copy -- see commit 2c94b8eca1
("SUNRPC: Use au_rslack when computing reply buffer size"). In fact, there
may only be room in the tail for a single copy of the MIC, and not part of
the MIC and then another complete copy.
The real world failure reported is that `ls` of a directory on NFS may
sometimes return -EIO, which can be traced back to xdr_buf_read_netobj()
failing to find available free space in the tail to copy the MIC.
Fix this by checking for the case of the MIC crossing the boundaries of
head, pages, and tail. If so, shift the buffer until the MIC is contained
completely within the pages or tail. This allows the remainder of the
function to create a sub buffer that directly address the complete MIC.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v5.1
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix typos in a few functions' documentation comments.
Signed-off-by: Roy Ben Shlomo <royb@sentinelone.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: royb@sentinelone.com
Link: http://lore.kernel.org/lkml/20190920171254.31373-1-royb@sentinelone.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to return error code of perf_new_session function on
failure instead of NULL.
Test Results:
Before Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
0
$
After Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
254
$
Committer notes:
Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Initial support for running on a system with an Ultravisor, which is software
that runs below the hypervisor and protects guests against some attacks by
the hypervisor.
- Support for building the kernel to run as a "Secure Virtual Machine", ie. as
a guest capable of running on a system with an Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with medium
sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas macros, both
to make it more readable and also enable some future optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to:
Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=WlW+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
- Fix clang build breakage with CONFIG_OPTIMIZE_INLINING=y
- Fix compilation of pointer tagging selftest
- Fix COND_SYSCALL definitions to work with CFI checks
- Fix stale documentation reference in our Kconfig
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl2DO5cQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNBHhCADEoSOk8WSijBvC4WNCPXBvukuk2KEwal2s
By+iEo3byr9uRskduddumEnTA3F5otfV7VR3HG34P8K3dzP541Zw8sPs5Q1MU/Zo
7SzU6J14q+Q3V/+F0RDpajP60bBbmjYQi23xmO8hnnHbZlIV7dteD+JvMWrNh31M
nTvPHpS+jm/SNFUSL1EMnbr2Au5UhN8j+9Qk1NyPgmTV9DkS4drDs4lBqp8VhvCD
v6kC3vdW5DiXvMHoa5RXO+3B57HYVmlhylEO0ZOmKxyZEhph1jiuR2ng4CDYtxo3
qngynXxa7u79a6TdDhnzresaku4xM22UO9bf1WkVq9yv6JQ7/ArV
=wZPH
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've had a few arm64 fixes trickle in this week. Nothing catastophic,
but all things that should be addressed:
- Fix clang build breakage with CONFIG_OPTIMIZE_INLINING=y
- Fix compilation of pointer tagging selftest
- Fix COND_SYSCALL definitions to work with CFI checks
- Fix stale documentation reference in our Kconfig"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix reference to docs for ARM64_TAGGED_ADDR_ABI
arm64: fix function types in COND_SYSCALL
selftests, arm64: add kernel headers path for tags_test
arm64: fix unreachable code issue with cmpxchg
Since add_probe_trace_event() can reuse tf->tevs[i] after calling
clear_probe_trace_event(), this can make perf-probe crash if the 1st
attempt of probe event finding fails to find an event argument, and the
2nd attempt fails to find probe point.
E.g.
$ perf probe -D "task_pid_nr tsk"
Failed to find 'tsk' in this function.
Failed to get entry address of warn_bad_vsyscall
Segmentation fault (core dumped)
Committer testing:
After the patch:
$ perf probe -D "task_pid_nr tsk"
Failed to find 'tsk' in this function.
Failed to get entry address of warn_bad_vsyscall
Failed to get entry address of signal_fault
Failed to get entry address of show_signal
Failed to get entry address of umip_printk
Failed to get entry address of __bad_area_nosemaphore
<SNIP>
Failed to get entry address of sock_set_timeout
Failed to get entry address of tcp_recvmsg
Probe point 'task_pid_nr' not found.
Error: Failed to add events.
$
Fixes: 092b1f0b5f ("perf probe: Clear probe_trace_event when add_probe_trace_event() fails")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/156856587999.25775.5145779959474477595.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull Hexagon maintainership update from Richard Kuo:
"I am leaving QuIC, and Brian Cain will be taking over maintainership
of the Hexagon port"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
Hexagon: change maintainer to Brian Cain
Fix to skip making a same probe address on given line.
Since a DWARF line info contains several entries for one line with
different column, perf probe will make a different probe on same address
if user specifies a probe point by "function:line" or "file:line".
e.g.
$ perf probe -D kernel_read:8
p:probe/kernel_read_L8 kernel_read+39
p:probe/kernel_read_L8_1 kernel_read+39
This skips such duplicated probe addresses.
Committer testing:
# uname -a
Linux quaco 5.3.0+ #2 SMP Thu Sep 19 16:13:22 -03 2019 x86_64 x86_64 x86_64 GNU/Linux
#
Before:
# perf probe -D kernel_read:8
p:probe/kernel_read _text+3115191
p:probe/kernel_read_1 _text+3115191
#
After:
# perf probe -D kernel_read:8
p:probe/kernel_read _text+3115191
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/156886447061.10772.4261569305869149178.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Addition of multiprobes to kprobe and uprobe events
Allows for more than one probe attached to the same location
- Addition of adding immediates to probe parameters
- Clean up of the recordmcount.c code. This brings us closer
to merging recordmcount into objtool, and reuse code.
- Other small clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXYQoqhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlIxAP9VVABbpuvOYqxKuFgyP62ituSXPLkL
gZv4I5Zse4b6/gD/eksFXY/OHo7jp6aQiHvxotUkAiFFE9iHzi0JscdMJgo=
=WqrT
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Addition of multiprobes to kprobe and uprobe events (allows for more
than one probe attached to the same location)
- Addition of adding immediates to probe parameters
- Clean up of the recordmcount.c code. This brings us closer to merging
recordmcount into objtool, and reuse code.
- Other small clean ups
* tag 'trace-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
selftests/ftrace: Update kprobe event error testcase
tracing/probe: Reject exactly same probe event
tracing/probe: Fix to allow user to enable events on unloaded modules
selftests/ftrace: Select an existing function in kprobe_eventname test
tracing/kprobe: Fix NULL pointer access in trace_porbe_unlink()
tracing: Make sure variable reference alias has correct var_ref_idx
tracing: Be more clever when dumping hex in __print_hex()
ftrace: Simplify ftrace hash lookup code in clear_func_from_hash()
tracing: Add "gfp_t" support in synthetic_events
tracing: Rename tracing_reset() to tracing_reset_cpu()
tracing: Document the stack trace algorithm in the comments
tracing/arm64: Have max stack tracer handle the case of return address after data
recordmcount: Clarify what cleanup() does
recordmcount: Remove redundant cleanup() calls
recordmcount: Kernel style formatting
recordmcount: Kernel style function signature formatting
recordmcount: Rewrite error/success handling
selftests/ftrace: Add syntax error test for multiprobe
selftests/ftrace: Add syntax error test for immediates
selftests/ftrace: Add a testcase for kprobe multiprobe event
...
We release wrong pointer on error path in cpu_cache_level__read
function, leading to segfault:
(gdb) r record ls
Starting program: /root/perf/tools/perf/perf record ls
...
[ perf record: Woken up 1 times to write data ]
double free or corruption (out)
Thread 1 "perf" received signal SIGABRT, Aborted.
0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
(gdb) bt
#0 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
#1 0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6
#2 0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6
#3 0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6
#4 0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6
#5 0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc..
#6 0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac..
#7 0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz..
...
Releasing the proper pointer.
Fixes: 720e98b5fa ("perf tools: Add perf data cache feature")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org: # v4.6+
Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
b4dd4f6e36 ("x86/vmware: Add a header file for hypercall definitions")
f36cf386e3 ("x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS")
be261ffce6 ("x86: Remove X86_FEATURE_MFENCE_RDTSC")
018ebca8bd ("x86/cpufeatures: Enable a new AVX512 CPU feature")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
To clarify, updating those files cause these bits of tools/perf to rebuild:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
INSTALL GTK UI
LD /tmp/build/perf/bench/perf-in.o
Those use just:
$ grep FEATURE tools/arch/x86/lib/mem*.S
tools/arch/x86/lib/memcpy_64.S: ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
tools/arch/x86/lib/memcpy_64.S: "jmp memcpy_erms", X86_FEATURE_ERMS
tools/arch/x86/lib/memset_64.S: ALTERNATIVE_2 "jmp memset_orig", "", X86_FEATURE_REP_GOOD, \
tools/arch/x86/lib/memset_64.S: "jmp memset_erms", X86_FEATURE_ERMS
$
I.e. none of the feature defines added/removed by the patches above.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Gayatri Kammela <gayatri.kammela@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://lkml.kernel.org/n/tip-pq63abgknsaeov23p80d8gjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the change in:
45e29d119e ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
That doesn't trigger any changes in tooling and silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/unistd.h' differs from latest version at 'arch/x86/include/uapi/asm/unistd.h'
diff -u tools/arch/x86/include/uapi/asm/unistd.h arch/x86/include/uapi/asm/unistd.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change from:
78e05972c5 ("ipc: fix semtimedop for generic 32-bit architectures")
Which doesn't trigger any change in tooling and silences this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hpnjuyjzoudltqe7dvbokqdt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
63f0c60379 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
that introduces prctl options that then automagically gets catched by
the prctl cmd table generator, and thus supported in the 'perf trace'
prctl beautifier for the 'option' argument:
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
--- before 2019-09-20 14:38:41.386720870 -0300
+++ after 2019-09-20 14:40:02.583990802 -0300
@@ -49,6 +49,8 @@
[52] = "GET_SPECULATION_CTRL",
[53] = "SET_SPECULATION_CTRL",
[54] = "PAC_RESET_KEYS",
+ [55] = "SET_TAGGED_ADDR_CTRL",
+ [56] = "GET_TAGGED_ADDR_CTRL",
};
static const char *prctl_set_mm_options[] = {
[1] = "START_CODE",
$
For now just the translation of 55 and 56 to the respecting strings are
done, more work needed to allow for filters to be used using strings.
This, for instance, already works:
# perf record -e syscalls:sys_enter_close --filter="fd==4"
# perf script | head -5
gpm 1018 [006] 21327.171436: syscalls:sys_enter_close: fd: 0x00000004
gpm 1018 [006] 21329.171583: syscalls:sys_enter_close: fd: 0x00000004
bash 4882 [002] 21330.785496: syscalls:sys_enter_close: fd: 0x00000004
bash 20672 [001] 21330.785719: syscalls:sys_enter_close: fd: 0x00000004
find 20672 [001] 21330.789082: syscalls:sys_enter_close: fd: 0x00000004
# perf record -e syscalls:sys_enter_close --filter="fd>=4"
^C[ perf record: Woken up 1 times to write data ]
# perf script | head -5
gpm 1018 [005] 21401.178501: syscalls:sys_enter_close: fd: 0x00000004
gsd-housekeepin 2287 [006] 21402.225365: syscalls:sys_enter_close: fd: 0x0000000b
gsd-housekeepin 2287 [006] 21402.226234: syscalls:sys_enter_close: fd: 0x0000000b
gsd-housekeepin 2287 [006] 21402.227255: syscalls:sys_enter_close: fd: 0x0000000b
gsd-housekeepin 2287 [006] 21402.228088: syscalls:sys_enter_close: fd: 0x0000000b
#
Being able to pass something like:
# perf record -e syscalls:sys_enter_prctl --filter="option=*TAGGED_ADDR*"
Should be easy enough, first using tracepoint filters, then via the
augmented_raw_syscalls.c BPF method.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-y8u8kvflooyo9x0if1g3jska@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disable the potentional shared library features, which breaks static
build if they are enabled and detected: jvmti and vdso libraries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190905090924.GA1949@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has been a quiet dev cycle for kgdb. There has been some good stuff
for kdb on the mailing list but unfortunately the patches caused a
couple of problems with the kdb pager so I had to drop those and they
will have to wait for next time!
That just leaves us with just a couple of very tiny clean ups for now:
* Fix a broken comment
* Use str_has_prefix() for the grep "pipe" in kdb
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAl2Do/AACgkQfOMlXTn3
iKF8Lw//cpxBlzZlBpkWDS7Uiuvsrzy8M7vZndYNsrnY89kjYOm0JynIT+8CZFXk
tLKWyL3OZxUTWUvouTSeqyJAbLJYOB3wBPCMy7aVg7UAaoeEvRzN/xipM21sa4Hm
1eVP51EMuNTaLzn4jgZV5Ad+ruSnj8Ua3TxK5qc2wYIuJvULnVzsSQxKcQopn2tk
LqIEwo0wvPVkb865z3D0KAOxqkftJHa4RdwNAyDy6xCQH/RlHR06NshKEN1g3j0I
0yKd/LBW7Z5yBMFpf1EOv3euF0URu9cmDP4o+n5Tyx71UbZ++NqiPFAAV2zWZq42
3sCjgLgPm+JIT4aMFEFlJn05xAwJEs3bpglGf1BTN2lFyIZZKD+lBpaAIA7AJtfi
oc/pJtmy9qAaACVe+l6s4q9YDZjcz9YZ1KZJuAUaVSc/L7AaZRC64CmzoLealZ1x
bKHvJ0FEKbwVC/JSF7ILKsb0qzyiQFAjuNfnqAX0KKrxOC42IukQy90eDC5JeWhd
yYAaUjtjeIKVn6wZYyki8dwmK2LPlAbathAQxNDYdYLyteTOeTyuZS7X8V0aLMDN
VfbOylp9SasZX80vHjhI+gZv523ljDj/Ec0o1kHaswpAELU+oVbdp91vuSvi4lPn
MmrNS2o3QZMlGMvLupSqmp+nQHZFmhoTWbxa84gYptPxwk2vipI=
=oIVA
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"It has been a quiet dev cycle for kgdb. There has been some good stuff
for kdb on the mailing list but unfortunately the patches caused a
couple of problems with the kdb pager so I had to drop those and they
will have to wait for next time!
That just leaves us with just a couple of very tiny clean ups for now:
- Fix a broken comment
- Use str_has_prefix() for the grep "pipe" in kdb"
* tag 'kgdb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: fix comment regarding static function
kdb: Replace strncmp with str_has_prefix
This original code in nfsd4_get_drc_mem() would hand out 30
slots (approximately NFSD_MAX_MEM_PER_SESSION bytes at slightly
over 2K per slot) to each requesting client until it ran out
of space, then it would possibly give one last client a reduced
allocation, then fail the allocation.
Since commit de766e5704 ("nfsd: give out fewer session slots as
limit approaches") the last 90 slots to be given to about 12
clients with quickly reducing slot counts (better than just 3
clients). This still seems unnecessarily hasty.
A subsequent patch allows over-allocation so every client gets
at least one slot, but that might be a bit restrictive.
The requested number of nfsd threads is the best guide we have to the
expected number of clients, so use that - if it is at least 8.
256 threads on a 256Meg machine - which is a lot for a tiny machine -
would result in nfsd_drc_max_mem being 2Meg, so 8K (3 slots) would be
available for the first client, and over 200 clients would get more
than 1 slot. So I don't think this change will be too debilitating on
poorly configured machines, though it does mean that a sensible
configuration is a little more important.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, if there are more clients than allowed for by the
space allocation in set_max_drc(), we fail a SESSION_CREATE
request with NFS4ERR_DELAY.
This means that the client retries indefinitely, which isn't
a user-friendly response.
The RFC requires NFS4ERR_NOSPC, but that would at best result in a
clean failure on the client, which is not much more friendly.
The current space allocation is a best-guess and doesn't provide any
guarantees, we could still run out of space when trying to allocate
drc space.
So fail more gracefully - always give out at least one slot.
If all clients used all the space in all slots, we might start getting
memory pressure, but that is possible anyway.
So ensure 'num' is always at least 1, and remove the test for it
being zero.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
perf stat:
Srikar Dronamraju:
- Fix a segmentation fault when using repeat forever.
- Reset previous counts on repeat with interval.
aarch64:
James Clark:
- Add PMU event JSON files for Cortex-A76 and Neoverse N1.
PowerPC:
Anju T Sudhakar:
- Make 'trace_cycles' the default event for 'perf kvm record' in PowerPC.
S/390:
- Link libjvmti to tools/lib/string.o to have a weak strlcpy()
implementation, providing previously unresolved symbol on s/390.
perf test:
Jiri Olsa:
- Add libperf automated tests to 'make -C tools/perf build-test'.
Colin Ian King:
- Fix spelling mistake.
Tree wide:
Arnaldo Carvalho de Melo:
- Some more header file sanitization.
libperf:
Jiri Olsa:
- Add dependency on libperf for python.so binding.
libtraceevent:
Sakari Ailus:
- Convert remaining %p[fF] users to %p[sS].
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXYTUUAAKCRCyPKLppCJ+
JxXzAP97DpoHp/oFD7rpPr51+8MLbPTMldeVdrXb3Yk9uX8qqQD/aqpNEeoIn3um
9iqE3pwqNmJGHgY8xr/6eTd4SEISVA8=
=Xucn
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.4-20190920-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf stat:
Srikar Dronamraju:
- Fix a segmentation fault when using repeat forever.
- Reset previous counts on repeat with interval.
aarch64:
James Clark:
- Add PMU event JSON files for Cortex-A76 and Neoverse N1.
PowerPC:
Anju T Sudhakar:
- Make 'trace_cycles' the default event for 'perf kvm record' in PowerPC.
S/390:
- Link libjvmti to tools/lib/string.o to have a weak strlcpy()
implementation, providing previously unresolved symbol on s/390.
perf test:
Jiri Olsa:
- Add libperf automated tests to 'make -C tools/perf build-test'.
Colin Ian King:
- Fix spelling mistake.
Tree wide:
Arnaldo Carvalho de Melo:
- Some more header file sanitization.
libperf:
Jiri Olsa:
- Add dependency on libperf for python.so binding.
libtraceevent:
Sakari Ailus:
- Convert remaining %p[fF] users to %p[sS].
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the handle_exception function addresses an exception, the interrupts
will be unconditionally enabled after finishing the context save. However,
It may erroneously enable the interrupts if the interrupts are disabled
before entering the handle_exception.
For example, one of the WARN_ON() condition is satisfied in the scheduling
where the interrupt is disabled and rq.lock is locked. The WARN_ON will
trigger a break exception and the handle_exception function will enable the
interrupts before entering do_trap_break function. During the procedure, if
a timer interrupt is pending, it will be taken when interrupts are enabled.
In this case, it may cause a deadlock problem if the rq.lock is locked
again in the timer ISR.
Hence, the handle_exception() can only enable interrupts when the state of
sstatus.SPIE is 1.
This patch is tested on HiFive Unleashed board.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply]
Fixes: bcae803a21 ("RISC-V: Enable IRQ during exception handling")
Cc: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The "clock-frequency" property of cpu nodes isn't required. Drop it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build
in unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=VGqV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
Export a few symbols used by kvm module. Without this, kvm cannot
be compiled as a module.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
[paul.walmsley@sifive.com: updated to apply; clarified short patch
description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
We will be using ONE_REG interface accessing VCPU registers from
user-space hence we add KVM_REG_RISCV for RISC-V VCPU registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Harts with id greater than or equal to CONFIG_NR_CPUS need to be
disabled. But the kernel can pick any hart as the main hart. So,
before picking the main hart, the kernel must disable harts with ids
greater than or equal to CONFIG_NR_CPUS.
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
[paul.walmsley@sifive.com: updated to apply; cleaned up patch
description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When naming the new devices, instead of using the ACPI ID in
the name as base, using the parent device's name. That makes
it possible to support multiple multi-instance i2c devices
of the same type in the same system.
This fixes an issue seen on some Intel Kaby Lake based
boards:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-INT3515-tps6598x.0'
Fixes: 2336dfadfb ("platform/x86: i2c-multi-instantiate: Allow to have same slaves")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The SIMATIC IPC277E uses the PMC clock for on-board components
and gets stuck during boot if the clock is disabled. Therefore,
add this device to the critical systems list.
Tested on SIMATIC IPC277E.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Cedric Hombourger <Cedric_Hombourger@mentor.com>
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A
codec like another HP machine.
Signed-off-by: Shih-Yuan Lee (FourDollars) <fourdollars@debian.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190920134052.GA8035@localhost
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use 'trace_imc/trace_cycles' as the default event for 'perf kvm record'
in powerpc.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20190718181749.30612-3-anju@linux.vnet.ibm.com
[ Add missing pmu.h header, needed because this patch uses pmu_have_event() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf kvm record' uses 'cycles'(if the user did not specify any event)
as the default event to profile the guest.
This will not provide any proper samples from the guest incase of
powerpc architecture, since in powerpc the PMUs are controlled by the
guest rather than the host.
Patch adds a function to pick an arch specific event for 'perf kvm
record', instead of selecting 'cycles' as a default event for all
architectures.
For powerpc this function checks for any user specified event, and if
there isn't any it returns invalid instead of proceeding with 'cycles'
event.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20190718181749.30612-2-anju@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move kvm-stat header file to the common include section, and make the
definitions in the header file under the conditional inclusion `#ifdef
HAVE_KVM_STAT_SUPPORT`.
This helps to define other 'perf kvm' related function prototypes in
kvm-stat header file, which may not need kvm-stat support.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-By: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20190718181749.30612-1-anju@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a TEST_ASSERT_VAL message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20190911152148.17031-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.
Without fix:
# perf stat -r 0 -I 5000 -e cycles -a sleep 10
# time counts unit events
5.000211692 3,13,89,82,34,157 cycles
10.000380119 1,53,98,52,22,294 cycles
10.040467280 17,16,79,265 cycles
Segmentation fault
This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..) if interval is set.
With fix:
# perf stat -r 0 -I 5000 -e cycles -a sleep 10
# time counts unit events
5.019866622 3,15,14,43,08,697 cycles
10.039865756 3,15,16,31,95,261 cycles
10.059950628 1,26,05,47,158 cycles
5.009902655 3,14,52,62,33,932 cycles
10.019880228 3,14,52,22,89,154 cycles
10.030543876 66,90,18,333 cycles
5.009848281 3,14,51,98,25,437 cycles
10.029854402 3,15,14,93,04,918 cycles
5.009834177 3,14,51,95,92,316 cycles
Committer notes:
Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:
(gdb) run stat -r0 -I500 sleep 1
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
(gdb) bt
#0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
#1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
#2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
#3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
#4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
#5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
#6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
(gdb)
Mostly the same as just before this patch:
Program received signal SIGSEGV, Segmentation fault.
0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
(gdb) bt
#0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
#1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
at util/stat-display.c:1172
#2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
#3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
#4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
#5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
#6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
#7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
(gdb)
Fixes: d4f63a4741 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using 'perf stat' with repeat and interval option, it shows wrong
values for events.
The wrong values will be shown for the first interval on the second and
subsequent repetitions.
Without the fix:
# perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5
2.000282489 53 faults
2.000282489 513 sched:sched_switch
4.005478208 3,721 faults
4.005478208 2,666 sched:sched_switch
5.025470933 395 faults
5.025470933 1,307 sched:sched_switch
2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------
2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------
4.019612206 4,730 faults
4.019612206 2,746 sched:sched_switch
5.039615484 3,953 faults
5.039615484 1,496 sched:sched_switch
2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------
2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------
4.000480342 4,282 faults
4.000480342 2,303 sched:sched_switch
5.000916811 1,322 faults
5.000916811 1,064 sched:sched_switch
#
prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.
The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.
On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.
Hence there is a possibility of events showing up as big number.
Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.
With the fix:
# perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5
2.019349347 2,597 faults
2.019349347 2,753 sched:sched_switch
4.019577372 3,098 faults
4.019577372 2,532 sched:sched_switch
5.019415481 1,879 faults
5.019415481 1,356 sched:sched_switch
2.000178813 8,468 faults
2.000178813 2,254 sched:sched_switch
4.000404621 7,440 faults
4.000404621 1,266 sched:sched_switch
5.040196079 2,458 faults
5.040196079 556 sched:sched_switch
2.000191939 6,870 faults
2.000191939 1,170 sched:sched_switch
4.000414103 541 faults
4.000414103 902 sched:sched_switch
5.000809863 450 faults
5.000809863 364 sched:sched_switch
#
Committer notes:
This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.
Fixes: 13370a9b5b ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no in-kernel %p[fF] users left. Convert the traceevent tool,
too, to align with the kernel.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: devicetree@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190918133419.7969-2-sakari.ailus@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
