[ Upstream commit e609c959a9 ]
Commit 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
added a dev->gso_max_size test to gso_features_check() in order to fall
back to GSO when needed.
This was added as it was noticed that some drivers could misbehave if TSO
packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size
limit. For instance, a device could be configured with BIG TCP for IPv4,
but not IPv6.
Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size()
and use the helper to respect both limits before falling back to GSO engine.
Fixes: 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8d4d34df7 ]
Add a small netif_get_gro_max_size() helper which returns the maximum IPv4
or IPv6 GRO size of the netdevice.
We later add a netif_get_gso_max_size() equivalent as well for GSO, so that
these helpers can be used consistently instead of open-coded checks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e609c959a9 ("net: Fix gso_features_check to check for both dev->gso_{ipv4_,}max_size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a4864671ca upstream.
It can be used after xas_load to check the order of loaded entries.
Compared to xa_get_order, it saves an XA_STATE and avoid a rewalk.
Added new test for xas_get_order, to make the test work, we have to export
xas_get_order with EXPORT_SYMBOL_GPL.
Also fix a sparse warning by checking the slot value with xa_entry instead
of accessing it directly, as suggested by Matthew Wilcox.
[kasong@tencent.com: simplify comment, sparse warning fix, per Matthew Wilcox]
Link: https://lkml.kernel.org/r/20240416071722.45997-4-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 6758c1128c ("mm/filemap: optimize filemap folio adding")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63c15822b8 ]
The two new functions allow reading/writing values of length up to
BITS_PER_LONG bits at arbitrary position in the bitmap.
The code was taken from "bitops: Introduce the for_each_set_clump macro"
by Syed Nayyar Waris with a number of changes and simplifications:
- instead of using roundup(), which adds an unnecessary dependency
on <linux/math.h>, we calculate space as BITS_PER_LONG-offset;
- indentation is reduced by not using else-clauses (suggested by
checkpatch for bitmap_get_value());
- bitmap_get_value()/bitmap_set_value() are renamed to bitmap_read()
and bitmap_write();
- some redundant computations are omitted.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/lkml/fe12eedf3666f4af5138de0e70b67a07c7f40338.1592224129.git.syednwaris@gmail.com/
Suggested-by: Yury Norov <yury.norov@gmail.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 77b0b98bb7 ("btrfs: subpage: fix the bitmap dump which can cause bitmap corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c2bd38b95 upstream.
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04e906839a upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42c3732fa8 upstream.
De-duplicate the same functionality in several places by hoisting
the is_dot_dotdot() utility function into linux/fs.h.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65f666c620 ]
When called from sbitmap_queue_get(), sbitmap_deferred_clear() may be run
with preempt disabled. In RT kernel, spin_lock() can sleep, then warning
of "BUG: sleeping function called from invalid context" can be triggered.
Fix it by replacing it with raw_spin_lock.
Cc: Yang Yang <yang.yang@vivo.com>
Fixes: 72d04bdcf3 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yang Yang <yang.yang@vivo.com>
Link: https://lore.kernel.org/r/20240919021709.511329-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf8c0b9ae ]
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7af ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7af ("f2fs: fix lost xattrs of directories")
Reported-by: wangzijie <wangzijie1@honor.com>
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reported-by: Yunlei He <heyunlei@hihonor.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32556ce93b ]
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
Fixes: 57c3bb725a ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f169c62ff7 ]
VMAs are skipped if there is no recent fault activity but this represents
a chicken-and-egg problem as there may be no fault activity if the PTEs
are never updated to trap NUMA hints. There is an indirect reliance on
scanning to be forced early in the lifetime of a task but this may fail
to detect changes in phase behaviour. Force inactive VMAs to be scanned
when all other eligible VMAs have been updated within the same scan
sequence.
Test results in general look good with some changes in performance, both
negative and positive, depending on whether the additional scanning and
faulting was beneficial or not to the workload. The autonuma benchmark
workload NUMA01_THREADLOCAL was picked for closer examination. The workload
creates two processes with numerous threads and thread-local storage that
is zero-filled in a loop. It exercises the corner case where unrelated
threads may skip VMAs that are thread-local to another thread and still
has some VMAs that inactive while the workload executes.
The VMA skipping activity frequency with and without the patch:
6.6.0-rc2-sched-numabtrace-v1
=============================
649 reason=scan_delay
9,094 reason=unsuitable
48,915 reason=shared_ro
143,919 reason=inaccessible
193,050 reason=pid_inactive
6.6.0-rc2-sched-numabselective-v1
=============================
146 reason=seq_completed
622 reason=ignore_pid_inactive
624 reason=scan_delay
6,570 reason=unsuitable
16,101 reason=shared_ro
27,608 reason=inaccessible
41,939 reason=pid_inactive
Note that with the patch applied, the PID activity is ignored
(ignore_pid_inactive) to ensure a VMA with some activity is completely
scanned. In addition, a small number of VMAs are scanned when no other
eligible VMA is available during a single scan window (seq_completed).
The number of times a VMA is skipped due to no PID activity from the
scanning task (pid_inactive) drops dramatically. It is expected that
this will increase the number of PTEs updated for NUMA hinting faults
as well as hinting faults but these represent PTEs that would otherwise
have been missed. The tradeoff is scan+fault overhead versus improving
locality due to migration.
On a 2-socket Cascade Lake test machine, the time to complete the
workload is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Min elsp-NUMA01_THREADLOCAL 174.22 ( 0.00%) 117.64 ( 32.48%)
Amean elsp-NUMA01_THREADLOCAL 175.68 ( 0.00%) 123.34 * 29.79%*
Stddev elsp-NUMA01_THREADLOCAL 1.20 ( 0.00%) 4.06 (-238.20%)
CoeffVar elsp-NUMA01_THREADLOCAL 0.68 ( 0.00%) 3.29 (-381.70%)
Max elsp-NUMA01_THREADLOCAL 177.18 ( 0.00%) 128.03 ( 27.74%)
The time to complete the workload is reduced by almost 30%:
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1 /
Duration User 91201.80 63506.64
Duration System 2015.53 1819.78
Duration Elapsed 1234.77 868.37
In this specific case, system CPU time was not increased but it's not
universally true.
From vmstat, the NUMA scanning and fault activity is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Ops NUMA base-page range updates 64272.00 26374386.00
Ops NUMA PTE updates 36624.00 55538.00
Ops NUMA PMD updates 54.00 51404.00
Ops NUMA hint faults 15504.00 75786.00
Ops NUMA hint local faults % 14860.00 56763.00
Ops NUMA hint local percent 95.85 74.90
Ops NUMA pages migrated 1629.00 6469222.00
Both the number of PTE updates and hint faults is dramatically
increased. While this is superficially unfortunate, it represents
ranges that were simply skipped without the patch. As a result
of the scanning and hinting faults, many more pages were also
migrated but as the time to completion is reduced, the overhead
is offset by the gain.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-7-mgorman@techsingularity.net
Stable-dep-of: f22cde4371 ("sched/numa: Fix the vma scan starving issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7a5b537c5 ]
NUMA Balancing skips VMAs when the current task has not trapped a NUMA
fault within the VMA. If the VMA is skipped then mm->numa_scan_offset
advances and a task that is trapping faults within the VMA may never
fully update PTEs within the VMA.
Force tasks to update PTEs for partially scanned PTEs. The VMA will
be tagged for NUMA hints by some task but this removes some of the
benefit of tracking PID activity within a VMA. A follow-on patch
will mitigate this problem.
The test cases and machines evaluated did not trigger the corner case so
the performance results are neutral with only small changes within the
noise from normal test-to-test variance. However, the next patch makes
the corner case easier to trigger.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-6-mgorman@techsingularity.net
Stable-dep-of: f22cde4371 ("sched/numa: Fix the vma scan starving issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed2da8b725 ]
NUMA balancing skips or scans VMAs for a variety of reasons. In preparation
for completing scans of VMAs regardless of PID access, trace the reasons
why a VMA was skipped. In a later patch, the tracing will be used to track
if a VMA was forcibly scanned.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-4-mgorman@techsingularity.net
Stable-dep-of: f22cde4371 ("sched/numa: Fix the vma scan starving issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3a6c97940 ]
The access_pids[] field name is somewhat ambiguous as no PIDs are accessed.
Similarly, it's not clear that next_pid_reset is related to access_pids[].
Rename the fields to more accurately reflect their purpose.
[ mingo: Rename in the comments too. ]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-3-mgorman@techsingularity.net
Stable-dep-of: f22cde4371 ("sched/numa: Fix the vma scan starving issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2c0b67dca ]
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d47da6bd4c ]
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba3369 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60949b7b80 ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29b359cf6d upstream.
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.
Based on patch from Florian Westphal.
Fixes: 2b84e215f8 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 45c4d994b8 ]
Accel minor management is based on DRM (and is also using struct
drm_minor internally), since DRM is using XArray for minors, it makes
sense to also convert accel.
As the two implementations are identical (only difference being the
underlying xarray), move the accel_minor_* functionality to DRM.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 452ef7f860 ]
Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.
Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6513eb3d31 upstream.
The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.
The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.
But it is based on two incorrect assumptions:
1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.
2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.
Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.
Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/
Fixes: 89add40066 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33cf42e68e ]
This is required by layouts that need to read whole NVMEM content. It's
especially useful for NVMEM devices without hardcoded layout (like
U-Boot environment data block).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1 ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 365130fd47 ]
Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.
The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits. If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368 ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ed5e2d50 ]
Useful where the fwnode_handle was obtained from a call such as
fwnode_find_reference() as it will safely do nothing if IS_ERR() is true
and will automatically release the reference on the variable leaving
scope.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368 ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dd1426e2c ]
It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f3a0523918 upstream.
amd-pstate driver utilizes the functions and data structures
provided by the ITMT architecture to enable the scheduler to
favor scheduling on cores which can be get a higher frequency
with lower voltage. We call it amd-pstate preferrred core.
Here sched_set_itmt_core_prio() is called to set priorities and
sched_set_itmt_support() is called to enable ITMT feature.
amd-pstate driver uses the highest performance value to indicate
the priority of CPU. The higher value has a higher priority.
The initial core rankings are set up by amd-pstate when the
system boots.
Add a variable hw_prefcore in cpudata structure. It will check
if the processor and power firmware support preferred core
feature.
Add one new early parameter `disable` to allow user to disable
the preferred core.
Only when hardware supports preferred core and user set `enabled`
in early parameter, amd pstate driver supports preferred core featue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12753d71e8 upstream.
Add support for getting the highest performance to the
generic CPPC driver. This enables downstream drivers
such as amd-pstate to discover and use these values.
Refer to Chapter 8.4.6.1.1.1. Highest Performance of ACPI
Specification 6.5 for details on continuous performance control
of CPPC (linked below).
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Link: https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html?highlight=cppc#highest-performance
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eba2591d99 upstream.
Instead of directly dereferencing page tables entries, which can cause
issues (see commit 20a004e7b0 ("arm64: mm: Use READ_ONCE/WRITE_ONCE when
accessing page tables"), let's introduce new functions to get the
pud/p4d/pgd entries (the pte and pmd versions already exist).
Note that arm pgd_t is actually an array so pgdp_get() is defined as a
macro to avoid a build error.
Those new functions will be used in subsequent commits by the riscv
architecture.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231213203001.179237-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33f339a1ba ]
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <yanghui.li@mediatek.com>
Signed-off-by: Yanghui Li <yanghui.li@mediatek.com>
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b05b0cd78 ]
Split __sys_getsockopt() into two functions by removing the core
logic into a sub-function (do_sock_getsockopt()). This will avoid
code duplication when doing the same operation in other callers, for
instance.
do_sock_getsockopt() will be called by io_uring getsockopt() command
operation in the following patch.
The same was done for the setsockopt pair.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-5-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1406245c29 ]
Split __sys_setsockopt() into two functions by removing the core
logic into a sub-function (do_sock_setsockopt()). This will avoid
code duplication when doing the same operation in other callers, for
instance.
do_sock_setsockopt() will be called by io_uring setsockopt() command
operation in the following patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-4-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f31e0d14d ]
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in setsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a615f67e1a ]
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in getsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 33f339a1ba ("bpf, net: Fix a potential race in do_sock_getsockopt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c898f6d7b0 ]
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 881559af5f ]
If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505ea2b295 ]
This adds functions to queue, dequeue and lookup into the cmd_sync
list.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f641f03ab ]
This fixes the UAF on __hci_acl_create_connection_sync caused by
connection abortion, it uses the same logic as to LE_LINK which uses
hci_cmd_sync_cancel to prevent the callback to run if the connection is
abort prematurely.
Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com
Fixes: 45340097ce ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aa42119d9 ]
With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.
hci_conn_check_pending() was used to trigger this retry, we can remove it
now.
Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.
This is somewhat reverting commit 4c67bc74f0 ("[Bluetooth] Support
concurrent connect requests").
With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45340097ce ]
Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.
With commit 4c67bc74f0 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.
This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).
We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.
This is very similar to what we're already doing for establishing LE
connections, and it works well there.
Note that this causes a test failure in mgmt-tester (test "Pair Device
- Power off 1") because the hci_abort_conn_sync() changes the error we
return on timeout of the "Create Connection". We'll fix this on the
mgmt-tester side by adjusting the expected error for the test.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c0868ad6 ]
We have error defines already, so let's use them.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
