[ Upstream commit 6e3abef2a2 ]
The add/remove eprobe test installs an eprobe for the openat syscall and
runs ls. It checks the filenames that were opened by ls against a
whitelist and a blacklist.
Commit 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING
pointer") fixed access to some string fields in eprobes. This triggers
test failures as the blacklist does not allow relative paths for the
openat parameters.
What makes this test unstable is the fact that the openat calls vary a
lot between different systems.
Refactor the test to make it more robust. "cd <directory>" will issue a
chdir syscall with the target directory as parameter. Set an eprobe on
the sys_enter_chdir event and filter for the exact directory name. Allow
(fault) as fallback.
Link: https://lore.kernel.org/all/20260804194705.760893-1-martin@kaiser.cx/
Fixes: 206b25c090 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202607151010.b68428e1-lkp@intel.com
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8f6f9fd93c upstream.
Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.
This patch (of 2):
Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status. The code expects that getline allocates the buffer for
the line on the first loop iteration. According to the Open Group
Spec[1], char *line has to be null pointer for this:
> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].
However, char *line is only declared, leading to an undefined value that
is potentially non-null. In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:
./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188] epc: 0x0000003fbf6b0184
[ 1367.804188] ra : 0x0000003fbf6d4664
[ 1367.804188] sp : 0x0000003fce5f2e40
[ 1367.805314] gp : 0x0000002aaab0dfb8
[ 1367.805314] tp : 0x0000003fbf6f14a8
[ 1367.805314] t0 : 0x0000003fbf63d000
...
Looking at the realloc implementation, Musl mallocs for a null pointer
memory. But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data. This leads to the
segfault we see:
void *realloc(void *p, size_t n)
{
if (!p) return malloc(n);
if (size_overflows(n)) return 0;
struct meta *g = get_meta(p);
...
}
Fix this by properly initializing the line pointer to NULL.
Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cea5702144 ]
The test ignores the return value of fork(), so both the parent and the
(newly created) child run the COW verification loops and then call
hmm_buffer_free() before returning into the kselftest harness, which
_exit()s each side. This duplicated teardown sequence has been observed
to manifest as a SIGSEGV in the test child, e.g.:
hmm-tests[360141]: segfault (11) at 0 nip 10006964 lr 1000ac3c code 1
in hmm-tests[6964,10000000+30000]
Fix this by adopting the same fork()-then-wait pattern already used by the
nearby anon_write_child / anon_write_child_shared tests in this file: the
child performs the COW verification and then _exit(0)s so it does not run
the test teardown, while the parent independently verifies COW, waits for
the child, and only then frees the buffer.
Link: https://lore.kernel.org/20260611034102.1030738-4-aboorvad@linux.ibm.com
Fixes: b659baea75 ("mm: selftests for exclusive device memory")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Sayali Patil <sayalip@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 224ed0e019 ]
Patch series "selftests/mm: assorted fixes for hmm-tests", v3.
This series fixes a few issues in hmm-tests that show up when page-size
and huge-page configuration differ from the hardcoded assumptions the
tests were written for (PMD/THP sizing, default hugepage size, and related
cases).
It also includes a fix to exclusive_cow: the test ignored the return value
of fork(), so both parent and child ran the same teardown path.
This patch (of 3):
The HMM compound testcase currently assumes only PMD-level mappings and
fails on systems where default_hugepagesz=1G is set, because the region is
then reported by the device at PUD level.
Determine the mapping level (PMD or PUD) the device reports for the first
page of the range and require every page to match that level exactly via
ASSERT_EQ(). This accepts PUD-level mappings while preserving the
expected/observed protection values printed on failure, and rejects a
fragmented mapping that mixes PMD- and PUD-level entries within the same
range (which a per-page OR check would have let pass).
Link: https://lore.kernel.org/20260611034102.1030738-1-aboorvad@linux.ibm.com
Link: https://lore.kernel.org/20260611034102.1030738-2-aboorvad@linux.ibm.com
Fixes: e478425bec ("mm/hmm: add tests for hmm_pfn_to_map_order()")
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69ba1d76d9 ]
Add a comment explaining that every other entry in the list is unmapped to
intentionally create fragmentation with locked pages before invoking
check_compaction().
Link: https://lore.kernel.org/da5e0a8d5152e54152c0d2f456aac2fac35af291.1779296493.git.sayalip@linux.ibm.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: David Hildenbrand (Arm) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e8ad1ff71 ]
For selftest bpf_iter/task_vma, I got a failure like below on my qemu run:
test_task_vma_common:FAIL:compare_output unexpected compare_output:
actual
'561593546000-561593585000r--p0000000000:241256579534/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs'
!= expected
'561593546000-561593585000r--p0000000000:245551546830/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs'
Further debugging found out file->f_inode->i_ino value may exceed 32bit,
e.g., i_ino = 0x14c2eae35, but the format string is '%u'. This caused
inode mismatch between bpf iter and proc result.
Fix the issue by using format string '%llu' to accommodate 64bit i_ino.
Fixes: e8168840e1 ("selftests/bpf: Add test for bpf_iter_task_vma")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260610051831.1346659-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78c09c0f4d ]
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Yijia Wang <wangyijia.yeah@bytedance.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 8510559c0f, which is
commit 26285e689c upstream.
The reverted commit extends the selftest to test timestamp event queue mask
manipulation in testptp. It exercises masks PTP_MASK_CLEAR_ALL and
PTP_MASK_EN_SINGLE, introduced in commit c5a445b1e9 ("ptp: support event
queue reader channel masks"), which is not on this stable branch. The test
case thus cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit bef3a83a9a ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e4 upstream. The only conflict between the two is the
getopt string, and there is otherwise no direct dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227), but not
'F' (introduced by c1c5068979).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 6b32d042aa, which is
commit 3d07b691ee upstream.
The cited commit allows testptp to set a configurable clock_id. That is
done via a PTP_SYS_OFFSET_EXTENDED ioctl call, whose argument is struct
ptp_sys_offset_extended, where the clock_id is set. However, this Linux
version does not support the ptp_sys_offset_extended.clockid field, and
the test case cannot be built against this tree's own UAPI headers.
The reverted commit was introduced to resolve a missing dependency of
commit bef3a83a9a ("testptp: Add option to open PHC in readonly mode"),
which is 76868642e4 upstream. My suspicion is that the only conflict
between the two is the getopt string, and there is otherwise no direct
dependency between the two.
This patch therefore reverts the cited commit, with hand-resolving the
getopt string to include 'r' (as introduced by c6dc458227), but not
'y' (introduced by 06954f715d).
Reported-by: Yong Wang <yongwang@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01ff78e4b3 ]
Using the format specifier +%s%3N with GNU date is honoured, and only
prints 3 digits of the nanoseconds portion of the seconds since epoch,
which corresponds to the milliseconds.
The uutils implementation of date currently does not honour this, and
always prints all 9 digits. This is a known issue [1], but can be worked
around by adapting this test to use nanoseconds instead of microseconds,
and then divide it by 1e6.
This fix is similar to what has been done on systemd side [2], and it is
needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0.
Note that the Fixes tag is there even if this patch doesn't fix an issue
in the kernel selftests, but it is useful for those using uutils 0.8.0.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Link: https://github.com/uutils/coreutils/issues/11658 [1]
Link: https://github.com/systemd/systemd/pull/41627 [2]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 952e0ee38c upstream.
In order to generate IGMPv3 and MLDv2 packets on the fly, we will need
helpers to calculate the packet checksum.
The approach presented in this patch revolves around payload templates
for mausezahn. These are mausezahn-like payload strings (01:23:45:...)
with possibly one 2-byte sequence replaced with the word PAYLOAD. The
main function is payload_template_calc_checksum(), which calculates
RFC 1071 checksum of the message. There are further helpers to then
convert the checksum to the payload format, and to expand it.
For IPv6, MLDv2 message checksum is computed using a pseudoheader that
differs from the header used in the payload itself. The fact that the
two messages are different means that the checksum needs to be
returned as a separate quantity, instead of being expanded in-place in
the payload itself. Furthermore, the pseudoheader includes a length of
the message. Much like the checksum, this needs to be expanded in
mausezahn format. And likewise for number of addresses for (S,G)
entries. Thus we have several places where a computed quantity needs
to be presented in the payload format. Add a helper u16_to_bytes(),
which will be used in all these cases.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 02cb2e6bac ("selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter enabled")
[bwh: Backported to 5.15: adjust context]
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc6e165a45 ]
PRE_KTEST can be useful for setting up the environment and POST_KTEST to
tear it down, however POST_KTEST only runs on the normal end-of-run path.
It is skipped when ktest exits through dodie() or cancel_test(). Final
cleanup hooks are skipped.
Factor the final hook execution into run_post_ktest(), call it from the
normal exit path and from the early exit paths, and guard it so the hook
runs at most once.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-8-565d412f4925@suse.com
Fixes: 921ed4c720 ("ktest: Add PRE/POST_KTEST and TEST options")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2de57a3c8 ]
A per-test override can clear an inherited default option by assigning an
empty value, but __set_test_option() still used option_defined() to decide
whether a per-test key existed. That turned an empty per-test assignment
back into "fall back to the default", so tests still could not clear
inherited settings.
For example:
DEFAULTS
(...)
LOG_FILE = /tmp/ktest-empty-override.log
CLEAR_LOG = 1
ADD_CONFIG = /tmp/.config
TEST_START
TEST_TYPE = build
BUILD_TYPE = nobuild
ADD_CONFIG =
This would run the test with ADD_CONFIG[1] = /tmp/.config
Fix by checking whether the per-test key exists before falling back. If it
does exist but is empty, treat it as unset for that test and stop the
fallback chain there.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-4-565d412f4925@suse.com
Fixes: 22c37a9ac4 ("ktest: Allow tests to undefine default options")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 057854f8a5 ]
check_buildlog() probes $warnings_file with -f even when WARNINGS_FILE is
not configured. Perl warns about the uninitialized value and adds noise to
the test log, which can hide the output we actually care about.
Check that WARNINGS_FILE is defined before testing whether the file exists.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-1-565d412f4925@suse.com
Fixes: 4283b169ab ("ktest: Add make_warnings_file and process full warnings")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d028f3e4b ]
The test_memcg_sock test in memcontrol.c sets up an IPv6 socket and send
data over it to consume memory and verify that memory.stat.sock and
memory.current values are close.
On systems where IPv6 isn't enabled or not configured to support
SOCK_STREAM, the test_memcg_sock test always fails. When the socket()
call fails, there is no way we can test the memory consumption and verify
the above claim. I believe it is better to just skip the test in this
case instead of reporting a test failure hinting that there may be
something wrong with the memcg code.
Link: https://lkml.kernel.org/r/20260311200526.885899-1-longman@redhat.com
Fixes: 5f8f019380 ("selftests: cgroup/memcontrol: add basic test for socket accounting")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 768059ede3 upstream.
The Perl localtime() function returns the month starting at 0 not 1. This
caused the date produced to create the directory for saving files of a
failed run to have the month off by one.
machine-test-useconfig-fail-20260314073628
The above happened in April, not March. The correct name should have been:
machine-test-useconfig-fail-20260414073628
This was somewhat confusing.
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Link: https://patch.msgid.link/20260420142426.33ad0293@fedora
Fixes: 7faafbd696 ("ktest: Add open and close console and start stop monitor")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64fac99037 upstream.
Commit 85506aca2e ("selftests/mqueue: Set timeout to 180 seconds")
intended to increase the timeout for mq_perf_tests from the default
kselftest limit of 45 seconds to 180 seconds.
Unfortunately, the file storing this information was incorrectly named
`setting` instead of `settings`, causing the kselftest runner not to
pick up the limit and keep using the default 45 seconds limit.
Fix this by renaming it to `settings` to ensure that the kselftest
runner uses the increased timeout of 180 seconds for this test.
Fixes: 85506aca2e ("selftests/mqueue: Set timeout to 180 seconds")
Cc: <stable@vger.kernel.org> # 5.10.y
Signed-off-by: Simon Liebold <simonlie@amazon.de>
Link: https://lore.kernel.org/r/20260312140200.2224850-1-simonlie@amazon.de
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c09412e58 upstream.
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1aa1dd9cc5 ]
charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a
fixed size of 256M. On systems with large base hugepages (e.g. 512MB),
this is smaller than a single hugepage, so the hugetlbfs mount ends up
with zero capacity (often visible as size=0 in mount output).
As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang
waiting for progress.
=== Error log ===
# uname -r
6.12.0-xxx.el10.aarch64+64k
#./charge_reserved_hugetlb.sh -cgroup-v2
# -----------------------------------------
...
# nr hugepages = 10
# writing cgroup limit: 5368709120
# writing reseravation limit: 5368709120
...
# write_to_hugetlbfs: Error mapping the file: Cannot allocate memory
# Waiting for hugetlb memory reservation to reach size 2684354560.
# 0
# Waiting for hugetlb memory reservation to reach size 2684354560.
# 0
...
# mount |grep /mnt/huge
none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0)
# grep -i huge /proc/meminfo
...
HugePages_Total: 10
HugePages_Free: 10
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 524288 kB
Hugetlb: 5242880 kB
Drop the mount args with 'size=256M', so the filesystem capacity is sufficient
regardless of HugeTLB page size.
Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com
Fixes: 29750f71a9 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02cb2e6bac ]
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2646773a0 ]
As explained in [1], iproute2 started rejecting tc-police burst sizes
that result in an overflow. This can happen when the burst size is high
enough and the rate is low enough.
A couple of test cases specify such configurations, resulting in
iproute2 errors and test failure.
Fix by reducing the burst size so that the test will pass with both new
and old iproute2 versions.
[1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/
Fixes: cb12d17632 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29f4801e9c upstream.
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.sh, because some refactoring have been done
later on: commit 0d16ed0c2e ("selftests: mptcp: add
{get,format}_endpoint(s) helpers") and commit c99d57d000
("selftests: mptcp: use pm_nl endpoint ops") are not in this version.
The same operation can still be done at the same place, without using
the new helpers.
Also, commit 1dc88d241f ("selftests: mptcp: pm_nl_ctl: always look
for errors") is not in this version, and create a conflict in the
context which is not related to the modification here.
Conflicts in pm_nl_ctl.c, because commit 69c6ce7b6e ("selftests:
mptcp: add implicit endpoint test case") is not in this version, and
caused a conflict in the context which is not related to the
modification here. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76868642e4 ]
PTP Hardware Clocks no longer require WRITE permission to perform
readonly operations, such as listing device capabilities or listening to
EXTTS events once they have been enabled by a process with WRITE
permissions.
Add '-r' option to testptp to open the PHC in readonly mode instead of
the default read-write mode. Skip enabling EXTTS if readonly mode is
requested.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d07b691ee ]
With the inclusion of commit c259acab83 ("ptp/ioctl: support
MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime()
now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and
CLOCK_MONOTONIC_RAW timebases along with the previously supported
CLOCK_REALTIME.
This patch adds a command line option 'y' to the testptp program to
choose one of the allowed timebases [realtime aka system, monotonic,
and monotonic-raw).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26285e689c ]
Add option to test timestamp event queue mask manipulation in testptp.
Option -F allows the user to specify a single channel that will be
applied on the mask filter via IOCTL.
The test program will maintain the file open until user input is
received.
This allows checking the effect of the IOCTL in debugfs.
eg:
Console 1:
```
Channel 12 exclusively enabled. Check on debugfs.
Press any key to continue
```
Console 2:
```
0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000
```
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf119ad5d ]
The -X option was chosen because X looks like a cross, and the underlying
callback is 'get cross timestamp'.
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8ba75c4eb ]
The -x option (where 'x' stands for eXtended) takes an argument which
represents the number of samples to request from the PTP device.
The help message will display the maximum number of samples allowed.
Providing an invalid argument will also display the maximum number of
samples allowed.
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a9a9a6139 ]
Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp
is invoked with a phase adjustment offset value. Support seconds and
nanoseconds for the offset value.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f64ae40de5 ]
Add option to shift the clock by a specified number of nanoseconds.
The new argument -n will specify the number of nanoseconds to add to the
ptp clock. Since the API doesn't support negative shifts those needs to
be calculated by subtracting full seconds and adding a nanosecond offset.
Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220221200637.125595-1-maciek@machnikowski.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c39a6a277e ]
If the last test fails, the other side still completes correctly,
which could lead to false positives.
Let's add a final barrier that ensures that the last test has finished
correctly on both sides, but also that the two sides agree on the
number of tests to be performed.
Fixes: 2f65b44e19 ("VSOCK: add full barrier between test cases")
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260108114419.52747-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7e4785fa3 ]
It looks like test_vxlan_under_vrf.sh is always failing to verify the
connectivity test during the ping between the two simulated VMs.
This is due to the fact that veth-hv in each VM should have a distinct
MAC address.
Fix by setting a unique MAC address on each simulated VM interface.
Without this fix:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL]
With this fix applied:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
NOTE: the connectivity test with the underlay VRF is still failing; it
seems that ARP requests are blocked at the simulated hypervisor level,
probably due to some missing ARP forwarding rules. This requires more
investigation (in the meantime we may consider to set that test as
expected failure - XFAIL).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Cao Jiaqiang <caojiaqiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6e8e595a0 upstream.
If you use an IDR with a non-zero base, and specify a range that lies
entirely below the base, 'max - base' becomes very large and
idr_get_free() can return an ID that lies outside of the requested range.
Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org
Fixes: 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f59b701b46 upstream.
KASAN reports a global-out-of-bounds access when running these nfit
tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh,
daxdev-errors.sh, and inject-error.sh.
[] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test]
[] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215
[] The buggy address belongs to the variable:
[] handle+0x1c/0x1df4 [nfit_test]
nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device
handle and triggers a KASAN error when it reads past the end of the
handle array. It should not be indexing the handle array at all.
The correct device handle is stored in per-DIMM test data. Each DIMM
has a struct nfit_mem that embeds a struct acpi_nfit_memdev that
describes the NFIT device handle. Use that device handle here.
Fixes: 10246dc84d ("acpi nfit: nfit_test supports translate SPA")
Cc: stable@vger.kernel.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3042cbe84 upstream.
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db06599 ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae24fc8a16 ]
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27746aaf1b ]
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c133390398 ]
When test_send_signal_kern__open_and_load() fails parent closes the
pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child
continues and enters infinite loop, while parent is stuck in wait(NULL).
Other error paths have similar issue, so kill the child before waiting on it.
The bug was discovered while compiling all of selftests with -O1 instead of -O2
which caused progs/test_send_signal_kern.c to fail to load.
Fixes: ab8b7f0cb3 ("tools/bpf: Add self tests for bpf_send_signal_thread()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 70bc793382 upstream.
PT_REGS*() macro on some architectures force-cast struct pt_regs to
other types (user_pt_regs, etc) and might drop volatile modifiers, if any.
Volatile isn't really required as pt_regs value isn't supposed to change
during the BPF program run, so this is correct behavior.
But progs/loop3.c relies on that volatile modifier to ensure that loop
is preserved. Fix loop3.c by declaring i and sum variables as volatile
instead. It preserves the loop and makes the test pass on all
architectures (including s390x which is currently broken).
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aea73bae66 upstream.
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a80 ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ The subtests structure has changed quite a bit in newer versions, see
commit c7d49c033d ("selftests: mptcp: join: alt. to exec specific
tests") and commit ae7bd9ccec ("selftests: mptcp: join: option to
execute specific tests") for example.
To resolve the conflicts, the same principle has been applied: adding
',backup' for each non-ID0 endpoint in remove_tests. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63c643aa7b ]
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a7 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Different operators used ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9311e9540a ]
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit afbf75e8da upstream.
The longest running netdevsim test, nexthop.sh, currently takes
5 min to finish. Around 260s to be exact, and 310s on a debug kernel.
The default timeout in selftest is 45sec, so we need an explicit
config. Give ourselves some headroom and use 10min.
Commit under Fixes isn't really to "blame" but prior to that
netdevsim tests weren't integrated with kselftest infra
so blaming the tests themselves doesn't seem right, either.
Fixes: 8ff25dac88 ("netdevsim: add Makefile for selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d01f8136d4 ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e8486702 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e321d590c ]
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f8e8486702 ("selftests/net: use destination options instead of hop-by-hop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d064de05 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
