[ Upstream commit 7accb1c432 ]
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4edd4ba71c ]
Musl defines its own struct ethhdr and thus defines __UAPI_DEF_ETHHDR to
zero. To avoid struct redefinition errors, user space is therefore
supposed to include netinet/if_ether.h before (or instead of)
linux/if_ether.h. To relieve them from this burden, include the libc
header here if not building for kernel space.
Reported-by: Alyssa Ross <hi@alyssa.is>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c25d01e1c4 ]
The unpacked unions within a packed struct generates alignment warnings
on clang for 32-bit ARM:
./usr/include/linux/vbox_vmmdev_types.h:239:4: error: field u within 'struct vmmdev_hgcm_function_parameter32'
is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:223:2)'
and is usually due to 'struct vmmdev_hgcm_function_parameter32' being packed,
which can lead to unaligned accesses [-Werror,-Wunaligned-access]
239 | } u;
| ^
./usr/include/linux/vbox_vmmdev_types.h:254:6: error: field u within
'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)'
is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:251:4)' and is usually due to
'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)'
being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
With the recent changes to compile-test the UAPI headers in more cases,
these warning in combination with CONFIG_WERROR breaks the build.
Fix the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512140314.DzDxpIVn-lkp@intel.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-kbuild/20260110-uapi-test-disable-headers-arm-clang-unaligned-access-v1-1-b7b0fa541daa@kernel.org/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-kbuild/29b2e736-d462-45b7-a0a9-85f8d8a3de56@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260115-kbuild-alignment-vbox-v1-2-076aed1623ff@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4e620eccb ]
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eae21beecb ]
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcb90a2834 ]
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class.
Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f493a6079 ]
fchmodat2(), introduced in version 6.6 is currently not in the change
attribute class of audit. Calling fchmodat2() to change a file
attribute in the same fashion than chmod() or fchmodat() will bypass
audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds fchmodat2() to the change attributes class.
Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 452a3eee22 ]
It is unlikely that this function will be ever called
with isk->inet_num being not zero.
Perform the check on isk->inet_num inside the locked section
for complete safety.
Fixes: 9b115749ac ("ipv6: add ip6_sock_set_v6only")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260216102202.3343588-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f47c1b77d0 ]
The clk_save_context() and clk_restore_context() helpers are only
implemented by the Common Clock Framework. They are not available when
using legacy clock frameworks. Dummy implementations are provided, but
only if no clock support is available at all.
Hence when CONFIG_HAVE_CLK=y, but CONFIG_COMMON_CLK is not enabled:
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_resume':
air_en8811h.c:(.text+0x83e): undefined reference to `clk_restore_context'
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_suspend':
air_en8811h.c:(.text+0x856): undefined reference to `clk_save_context'
Fix this by moving forward declarations and dummy implementions from the
HAVE_CLK to the COMMON_CLK section.
Fixes: 8b95d1ce33 ("clk: Add functions to save/restore clock context en-masse")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511301553.eaEz1nEW-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afcae7d7b8 ]
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f4 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21d033e472 ]
After the optimization to only perform one GC per jiffy, a new problem
was introduced. If more than 8 new connections are tracked per jiffy the
list won't be cleaned up fast enough possibly reaching the limit
wrongly.
In order to prevent this issue, only skip the GC if it was already
triggered during the same jiffy and the increment is lower than the
clean up limit. In addition, increase the clean up limit to 64
connections to avoid triggering GC too often and do more effective GCs.
This has been tested using a HTTP server and several
performance tools while having nft_connlimit/xt_connlimit or OVS limit
configured.
Output of slowhttptest + OVS limit at 52000 connections:
slow HTTP test status on 340th second:
initializing: 0
pending: 432
connected: 51998
error: 0
closed: 0
service available: YES
Fixes: d265929930 ("netfilter: nf_conncount: reduce unnecessary GC")
Reported-by: Aleksandra Rukomoinikova <ARukomoinikova@k2.cloud>
Closes: https://lore.kernel.org/netfilter/b2064e7b-0776-4e14-adb6-c68080987471@k2.cloud/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553b4999cb ]
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Mark explained that this should not happen with this hardware since it
is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will
refuse to accept such a handler.
Set IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 1c6c69525b ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31b9887c72 ]
I2C board info is only required during adapter setup so there is no
requirement to keeping a pointer to it once running. To support dynamic
device addition we can't rely on board info - user-space creation
through sysfs won't have a boardinfo.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220117174816.1963463-2-quic_jiles@quicinc.com
Stable-dep-of: 3502cea99c ("i3c: Move device name assignment after i3c_bus_init")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f571faf6e4 ]
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Expose new interfaces for this: timer_shutdown_sync() and timer_shutdown().
timer_shutdown_sync() has the same functionality as timer_delete_sync()
plus the NULL-ification of the timer function.
timer_shutdown() has the same functionality as timer_delete() plus the
NULL-ification of the timer function.
In both cases the rearming of the timer is prevented by silently discarding
rearm attempts due to timer->function being NULL.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201625.314230270@linutronix.de
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb663f0f3c ]
The timer related functions do not have a strict timer_ prefixed namespace
which is really annoying.
Rename del_timer() to timer_delete() and provide del_timer()
as a wrapper. Document that del_timer() is not for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201625.015535022@linutronix.de
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9a5a305686 ]
del_singleshot_timer_sync() used to be an optimization for deleting timers
which are not rearmed from the timer callback function.
This optimization turned out to be broken and got mapped to
del_timer_sync() about 17 years ago.
Get rid of the undocumented indirection and use del_timer_sync() directly.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.706987932@linutronix.de
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3ee4dc84c ]
Add a work abstraction at the cfg80211 level that will always
hold the wiphy_lock() for any work executed and therefore also
can be canceled safely (without waiting) while holding that.
This improves on what we do now as with the new wiphy works we
don't have to worry about locking while cancelling them safely.
Also, don't let such works run while the device is suspended,
since they'll likely need to interact with the device. Flush
them before suspend though.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream 387659939c commit ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ttm_bo_move_memcpy+0x3b4/0x460 [ttm]
bo_driver_move+0x32/0x40 [drm_vram_helper]
ttm_bo_handle_move_mem+0x118/0x200 [ttm]
ttm_bo_validate+0xfa/0x220 [ttm]
drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper]
drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper]
drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper]
drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper]
drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper]
drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper]
drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper]
drm_atomic_commit+0x9c/0x160 [drm]
drm_client_modeset_commit_atomic+0x33a/0x380 [drm]
drm_client_modeset_commit_locked+0x77/0x220 [drm]
drm_client_modeset_commit+0x31/0x60 [drm]
__drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper]
drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper]
fbcon_init+0x316/0x790
visual_init+0x113/0x1d0
do_bind_con_driver+0x2a3/0x5c0
do_take_over_console+0xa9/0x270
do_fbcon_takeover+0xa1/0x170
do_fb_registered+0x2a8/0x340
fbcon_fb_registered+0x47/0xe0
register_framebuffer+0x294/0x4a0
__drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
bochs_pci_probe+0x6ca/0x772 [bochs]
local_pci_probe+0x4d/0xb0
pci_device_probe+0x119/0x320
really_probe+0x181/0x550
__driver_probe_device+0xc6/0x220
driver_probe_device+0x32/0x100
__driver_attach+0x195/0x200
bus_for_each_dev+0xbb/0x120
driver_attach+0x27/0x30
bus_add_driver+0x22e/0x2f0
driver_register+0xa9/0x190
__pci_register_driver+0x90/0xa0
bochs_pci_driver_init+0x52/0x1000 [bochs]
do_one_initcall+0x76/0x430
do_init_module+0x61/0x28a
load_module+0x1f82/0x2e50
__do_sys_finit_module+0xf8/0x190
__x64_sys_finit_module+0x23/0x30
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: 3312be8f6f ("drm/ttm: move populated state into page flags")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031113350.4180975-1-cuigaosheng1@huawei.com
Signed-off-by: Christian König <christian.koenig@amd.com>
[ The context change is due to the commit 43d46f0b78
("drm/ttm: s/FLAG_SG/FLAG_EXTERNAL/") in v5.16
which is irrelevant to the logic of this patch.
In addition, v6.1 has included the fix. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e07cda5f23 ]
Let's add walk_page_range_vma(), which is similar to walk_page_vma(),
however, is only interested in a subset of the VMA range.
To be used in KSM code to stop using follow_page() next.
Link: https://lkml.kernel.org/r/20221021101141.84170-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f5548c318d ("ksm: use range-walk function to jump over holes in scan_get_next_rmap_item")
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 210b1f6576 ]
Scheduling reset_work after a nvme subsystem reset is expected to fail
on pcie, but this also prevents potential handling the platform's pcie
services may provide that might successfully recovering the link without
re-enumeration. Such examples include AER, DPC, and power's EEH.
Provide a pci specific operation that safely initiates a subsystem
reset, and instead of scheduling reset work, read back the status
register to trigger a pcie read error.
Since this only affects pci, the other fabrics drivers subscribe to a
generic nvmf subsystem reset that is exactly the same as before. The
loop fabric doesn't use it because nvmet doesn't support setting that
property anyway.
And since we're using the magic NSSR value in two places now, provide a
symbolic define for it.
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 0edb475ac0 ("nvme: fix PCIe subsystem reset controller state transition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dbf1d590d upstream.
In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,
Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.
Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.
Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.
[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8
Changes in v3:
- Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.
Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output
Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Keerthana: Backported the patch to v5.15-v6.1 ]
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 16ab85e784 ]
Add the rx_oversize_pkts_buffer counter to ethtool statistics.
This counter exposes the number of dropped received packets due to
length which arrived to RQ and exceed software buffer size allocated by
the device for incoming traffic. It might imply that the device MTU is
larger than the software buffers size.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 476681f10c ("net/mlx5e: Account for netdev stats in ndo_get_stats64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e94e61bd4 ]
total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.
send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.
cq_overrun - number of times CQ entered an error state due to an
overflow.
async_eq_overrun -number of time an EQ mapped to async events was
overrun.
comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.
quota_exceeded_command - number of commands issued and failed due to quota
exceeded.
invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 476681f10c ("net/mlx5e: Account for netdev stats in ndo_get_stats64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e859d375d1 ]
File descriptor based pc_clock_*() operations of dynamic posix clocks
have access to the file pointer and implement permission checks in the
generic code before invoking the relevant dynamic clock callback.
Character device operations (open, read, poll, ioctl) do not implement a
generic permission control and the dynamic clock callbacks have no
access to the file pointer to implement them.
Extend struct posix_clock_context with a struct file pointer and
initialize it in posix_clock_open(), so that all dynamic clock callbacks
can access it.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c6946675 ]
Add the necessary structure to support custom private-data per
posix-clock user.
The previous implementation of posix-clock assumed all file open
instances need access to the same clock structure on private_data.
The need for individual data structures per file open instance has been
identified when developing support for multiple timestamp event queue
users for ptp_clock.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e859d375d1 ("posix-clock: Store file pointer in struct posix_clock_context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6c209ceb8 ]
I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881.
None of these RFCs have an NFS status code that match the numeric
value "11".
Based on the meaning of the EAGAIN errno, I presume the use of this
status in NFSD means NFS4ERR_DELAY. So replace the one usage of
nfserr_eagain, and remove it from NFSD's NFS status conversion
tables.
As far as I can tell, NFSERR_EAGAIN has existed since the pre-git
era, but was not actually used by any code until commit f4e44b3933
("NFSD: delay unmount source's export after inter-server copy
completed."), at which time it become possible for NFSD to return
a status code of 11 (which is not valid NFS protocol).
Fixes: f4e44b3933 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4806ded4c1 ]
Common nfs_stat_to_errno() is used by both fs/nfs/nfs2xdr.c and
fs/nfs/nfs3xdr.c
Will also be used by fs/nfsd/localio.c
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stable-dep-of: c6c209ceb8 ("NFSD: Remove NFSERR_EAGAIN")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02d1e1a3f9 ]
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b2 ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ed3ba9b6e2 upstream.
SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to
br_ioctl_call(), which causes unnecessary RTNL dance and the splat
below [0] under RTNL pressure.
Let's say Thread A is trying to detach a device from a bridge and
Thread B is trying to remove the bridge.
In dev_ioctl(), Thread A bumps the bridge device's refcnt by
netdev_hold() and releases RTNL because the following br_ioctl_call()
also re-acquires RTNL.
In the race window, Thread B could acquire RTNL and try to remove
the bridge device. Then, rtnl_unlock() by Thread B will release RTNL
and wait for netdev_put() by Thread A.
Thread A, however, must hold RTNL after the unlock in dev_ifsioc(),
which may take long under RTNL pressure, resulting in the splat by
Thread B.
Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR)
---------------------- ----------------------
sock_ioctl sock_ioctl
`- sock_do_ioctl `- br_ioctl_call
`- dev_ioctl `- br_ioctl_stub
|- rtnl_lock |
|- dev_ifsioc '
' |- dev = __dev_get_by_name(...)
|- netdev_hold(dev, ...) .
/ |- rtnl_unlock ------. |
| |- br_ioctl_call `---> |- rtnl_lock
Race | | `- br_ioctl_stub |- br_del_bridge
Window | | | |- dev = __dev_get_by_name(...)
| | | May take long | `- br_dev_delete(dev, ...)
| | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...)
| | | | `- rtnl_unlock
\ | |- rtnl_lock <-' `- netdev_run_todo
| |- ... `- netdev_run_todo
| `- rtnl_unlock |- __rtnl_unlock
| |- netdev_wait_allrefs_any
|- netdev_put(dev, ...) <----------------'
Wait refcnt decrement
and log splat below
To avoid blocking SIOCBRDELBR unnecessarily, let's not call
dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF.
In the dev_ioctl() path, we do the following:
1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl()
2. Check CAP_NET_ADMIN in dev_ioctl()
3. Call dev_load() in dev_ioctl()
4. Fetch the master dev from ifr.ifr_name in dev_ifsioc()
3. can be done by request_module() in br_ioctl_call(), so we move
1., 2., and 4. to br_ioctl_stub().
Note that 2. is also checked later in add_del_if(), but it's better
performed before RTNL.
SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since
the pre-git era, and there seems to be no specific reason to process
them there.
[0]:
unregister_netdevice: waiting for wpan3 to become free. Usage count = 2
ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4282 [inline]
netdev_hold include/linux/netdevice.h:4311 [inline]
dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624
dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826
sock_do_ioctl+0x1ca/0x260 net/socket.c:1213
sock_ioctl+0x23a/0x6c0 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 893b195875 ("net: bridge: fix ioctl locking")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[cascardo: fixed conflict at dev_ifsioc]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15504b1163 ]
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 504c1cabe3 ]
Since commit b1123ea6d3 ("mm: balloon: use general non-lru movable page
feature"), these functions are called via balloon_aops callbacks. They're
not called directly outside this file. So make them static and clean up
the relevant code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220125132221.2220-1-linmiaohe@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Stable-dep-of: 0da2ba35c0 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ace3297a7 ]
Before this patch, the kernel was saving any flags set by the userspace,
even unknown ones. This doesn't cause critical issues because the kernel
is only looking at specific ones. But on the other hand, endpoints dumps
could tell the userspace some recent flags seem to be supported on older
kernel versions.
Instead, ignore all unknown flags when parsing them. By doing that, the
userspace can continue to set unsupported flags, but it has a way to
verify what is supported by the kernel.
Note that it sounds better to continue accepting unsupported flags not
to change the behaviour, but also that eases things on the userspace
side by adding "optional" endpoint types only supported by newer kernel
versions without having to deal with the different kernel versions.
A note for the backports: there will be conflicts in mptcp.h on older
versions not having the mentioned flags, the new line should still be
added last, and the '5' needs to be adapted to have the same value as
the last entry.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ GENMASK(5, 0) => GENMASK(3, 0) + context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8b4ac54299 ]
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-36-tiwai@suse.de
Stable-dep-of: 0c4a13ba88 ("ALSA: wavefront: Fix integer overflow in sample size validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit faf07e611d ]
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
[ added backward-compatible define for TPM_MAX_DIGEST_SIZE to support older ima_init.c code still using that macro name ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit baeb66fbd4 ]
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e523 ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 082b86919b upstream.
Commit cbd9463da1 ("media: v4l2-mem2mem: Avoid calling .device_run in
v4l2_m2m_job_finish") deferred calls to .device_run() to a work queue to
avoid recursive calls when a job is finished right away from
.device_run(). It failed to update the v4l2_m2m_job_finish()
documentation that still states the function must not be called from
.device_run(). Fix it.
Fixes: cbd9463da1 ("media: v4l2-mem2mem: Avoid calling .device_run in v4l2_m2m_job_finish")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 96b010536e ]
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
