Commit graph

546,446 commits

Author SHA1 Message Date
Chuck Lever
d683cc49da NFS: Fix size of NFSACL SETACL operations
When encoding the NFSACL SETACL operation, reserve just the estimated
size of the ACL rather than a fixed maximum. This eliminates needless
zero padding on the wire that the server ignores.

Fixes: ee5dc7732b ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 08:55:28 -04:00
NeilBrown
7ef5ca4fe4 NFS: report more appropriate block size for directories.
In glibc 2.21 (and several previous), a call to opendir() will
result in a 32K (BUFSIZ*4) buffer being allocated and passed to
getdents.

However a call to fdopendir() results in an 'fstat' request to
determine block size and a matching buffer allocated for subsequent
use with getdents.  This will typically be 1M.

The first getdents call on an NFS directory will always use
READDIR_PLUS (or NFSv4 equivalent) if available.  Subsequent getdents
calls only use this more expensive version if some 'stat' requests are
made between the getdents calls.

For this reason it is good to keep at least that first getdents call
relatively short.  When fdopendir() and readdir() is used on a large
directory, it takes approximately 32 times as long to complete as
using "opendir".  Current versions of 'find' use fdopendir() and
demonstrate this slowness.

'stat' on a directory currently returns the 'wsize'.  This number has
no meaning on directories.
Actual READDIR requests are limited to ->dtsize, which itself is
capped at 4 pages, coincidently the same as BUFSIZ*4.
So this is a meaningful number to use as the blocksize on directories,
and has the effect of making 'find' on large directories go a lot
faster.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 08:55:27 -04:00
Trond Myklebust
5cae02f427 NFSv4: Always drain the slot table before re-establishing the lease
While the NFSv4.1 code has always drained the slot tables in order to stop
non-recovery related RPC calls when doing lease recovery, the NFSv4 code
did not.
The reason for the difference in behaviour is that NFSv4 does not have
session state, and so RPC calls can in theory proceed while recovery is
happening. In practice, however, anything I/O or state related needs to
wait until recovery is over.

This patch changes the behaviour of NFSv4 to match that of NFSv4.1 so that
we can simplify the state recovery code by assuming that we do not have to
deal with races between recovery and ordinary I/O.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-02 08:55:27 -04:00
Y Vo
733cf014f0 gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
Add ACPI support for APM X-Gene GPIO standby driver.

Signed-off-by: Y Vo <yvo@apm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 14:52:00 +02:00
Thomas Gleixner
051ebd101b clockevents: Use set/get state helper functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2015-06-02 14:40:48 +02:00
Thomas Gleixner
d7eb231c71 clockevents: Provide functions to set and get the state
We want to rename dev->state, so provide proper get and set
functions. Rename clockevents_set_state() to
clockevents_switch_state() to avoid confusion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2015-06-02 14:40:47 +02:00
Viresh Kumar
472c4a9437 clockevents: Use helpers to check the state of a clockevent device
Use accessor functions to check the state of clockevent devices in
core code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/fa2b9869fd17f210eaa156ec2b594efd0230b6c7.1432192527.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-02 14:40:47 +02:00
Viresh Kumar
3434d23b69 clockevents: Add helpers to check the state of a clockevent device
Some clockevent drivers, once migrated to use per-state callbacks,
need to check the state of the clockevent device in their callbacks or
interrupt handler.

Add accessor functions clockevent_state_*() to get this information.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/04a717d490335c688dd7af899fbcede97e1bb8ee.1432192527.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-02 14:40:47 +02:00
Masahiro Yamada
7e9236ff3d pinctrl: fix confusing debug message in pinctrl_register_map()
There are two types for pinctrl maps: pinmux and pinconfig
This debug message shows the number of maps of both types.
The string "pinmux map" is not precise.  Let's say "pinctrl map"
instead.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[also fixed %d -> %u]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 13:32:20 +02:00
Masahiro Yamada
4fd24e220e pinctrl: zynq: add static const to zynq_pctrl_groups
This array is only referenced in this file and never updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 13:30:33 +02:00
Masahiro Yamada
c0b8555c15 pinctrl: zynq: add static to zynq_pins
This array is only referenced in this file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02 13:29:35 +02:00
Takashi Iwai
53cd255ce7 UBI: Use static class and attribute groups
This patch cleans up the manual device_create_file() or
class_create_file() calls by replacing with static attribute groups.
It simplifies the code and also avoids the possible races between the
device/class registration and sysfs creations.

For the simplification, also make ubi_class a static instance with
initializers, too.

Amend a bit by Hujianyang.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 13:16:25 +02:00
S Twiss
050d0f2de1 regulator: da9062: Remove unused variable build warning
Remove the unused variable build warning for reg_matches that appears
during the compilation of the DA9062 regulator driver.

da9062-regulator.c: In function da9062_regulator_probe:
da9062-regulator.c:727:29: warning: unused variable reg_matches

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 12:11:17 +01:00
Johannes Berg
3b79af973c mac80211: stop using pointers as userspace cookies
Even if the pointers are really only accessible to root and used
pretty much only by wpa_supplicant, this is still not great; even
for debugging it'd be easier to have something that's easier to
read and guaranteed to never get reused.

With the recent change to make mac80211 create an ack_skb for the
mgmt-tx path this becomes possible, only the client probe method
needs to also allocate an ack_skb, and we can store the cookie in
that skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 13:07:59 +02:00
Johannes Berg
b2eb0ee6d0 mac80211: copy nl80211 mgmt TX SKB for status
When we return the TX status for an nl80211 mgmt TX SKB, we
should also return the original frame with the status to
allow userspace to match up the submission (it could also
use the cookie but both ways are permissible.)

As TX SKBs could be encrypted, at least in the case of ANQP
while associated with the AP, copy the original SKB, store
it with an ACK frame ID and restructure the status path to
use that to return status with the original SKB. Otherwise,
userspace (in particular wpa_supplicant) will get confused.

Reported-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 13:07:55 +02:00
Jie Yang
616268292b ASoC: Intel: don't need compress offload for broadwell
We don't need compress offload feature for broadwell broadwell machine,
here remove the non exist dependency.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 11:58:45 +01:00
Fabio Estevam
29454738f9 regulator: wm831x: Pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02 11:53:59 +01:00
Maxime Coquelin
d4688bdc63 clockevents/drivers/timer-stm32: Fix build warning spotted by kbuild test robot
This patch fixes below warning spotted by kbuild test robot when building
with ARCH=powerpc:

   drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init':
>> drivers/clocksource/timer-stm32.c:140:9: warning: large integer implicitly
	truncated to unsigned type [-Woverflow]

     writel_relaxed(~0UL, data->base + TIM_ARR);

The fix consists in using 0U instead of 0UL.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:16 +02:00
Maxime Coquelin
e37e45934a clockevents/drivers: Add STM32 Timer driver
STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers.
The drivers detects whether the time is 16 or 32 bits, and applies a
1024 prescaler value if it is 16 bits.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:15 +02:00
Maxime Coquelin
4853914ffc dt-bindings: Document the STM32 timer bindings
This adds documentation of device tree bindings for the
STM32 timer.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:14 +02:00
Maxime Coquelin
4958ebb3d0 clocksource/drivers/armv7m_systick: Add ARM System timer driver
This patch adds clocksource support for ARMv7-M's System timer,
also known as SysTick.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:14 +02:00
Maxime Coquelin
571fc8e836 dt-bindings: Document the ARM System timer bindings
This adds documentation of device tree bindings for the
ARM System timer.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:13 +02:00
Joachim Eastwood
5fc9b49dea doc: dt: Add documentation for lpc3220-timer
Add DT bindings documentation for lpc3220-timer. This timer is
used as clocksource on many NXP platforms.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-06-02 12:10:11 +02:00
Joachim Eastwood
050dd3222b clocksource/drivers/lpc32xx: Add the lpc32xx timer driver
Add support for using the NXP LPC timer as clocksource and clock
event. These timers are present on many NXP devices including
LPC32xx, LPC17xx, LPC18xx and LPC43xx.

The timer has a 32-bit timer counter register with a programmable
32-bit prescaler. It supports up to 4 compare match values with
interrupt generation and reset/stop timer counter action.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-06-02 12:10:10 +02:00
Krzysztof Kozlowski
65ec7b2718 clocksource/drivers/exynos_mct: Remove old platform mct_init()
Since commit 228e3023eb ("Merge tag 'mct-exynos-for-v3.10' of ...") the
mct_init() was superseded by mct_init_dt() and is not referenced
anywhere. Remove it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:09 +02:00
Krzysztof Kozlowski
6c10bf6372 clocksource/drivers/exynos_mct: Staticize struct clocksource
The struct clocksource 'mct_frc' is not exported and used outside so
make it static.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:09 +02:00
Krzysztof Kozlowski
37285674f3 clocksource/drivers/exynos_mct: Change exynos4_mct_tick_clear return type to void
Return value of exynos4_mct_tick_clear() was never checked so it can
be safely changed to void.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:08 +02:00
Stephen Boyd
4ba15d1d41 clocksource/drivers/qcom: Remove dead code
This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-06-02 12:10:08 +02:00
shengyong
2848594a20 UBI: add a helper function for updatting on-flash layout volumes
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:47:51 +02:00
shengyong
e96a8a3bb6 UBI: Fastmap: Do not add vol if it already exists
During fastmap attaching, check if a volume already exists when adding
the volume to volume tree. NOTE that the issue cannot happen, only if
the on-flash fastmap data is modified.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:46:14 +02:00
shengyong
e8d266cf8d UBI: Init vol->reserved_pebs by assignment
`vol' is a newly allocated value by kzalloc. Initialize it by assignment
instead of `+='.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:44:43 +02:00
shengyong
f6e951af34 UBI: Fastmap: Rename variables to make them meaningful
s/fmpl1/fmpl
s/fmpl2/fmpl_wl

Add "WL" to the error message when wrong WL pool magic number is detected.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:44:20 +02:00
shengyong
a18fd67267 UBI: Fastmap: Remove unnecessary `\'
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:43:52 +02:00
shengyong
212240dfd2 UBI: Fastmap: Use max() to get the larger value
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:43:33 +02:00
Chao Yu
a1fe33af5f ubifs: fix to check error code of register_shrinker
register_shrinker() in ubifs_init() can fail due to fail to call kzalloc.
This patch fixes to check the return value of register_shrinker, otherwise
our shrinker may be unregistered after ubifs initialized successfully.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:41:38 +02:00
Dan Ehrenberg
2bf50d42f3 UBI: block: Dynamically allocate minor numbers
This patch makes ubiblock devices have minor numbers beginning from
0, allocated dynamically independently of the ubi device/volume
number. This property becomes useful because, on 32-bit architectures
with LFS turned off in a userspace program, device minor numbers
over 8 bits cause stat to return -EOVERFLOW. If the device number is
high (>1) due to multiple MTD partitions, such an overflow will occur.
While enabling LFS is clearly a nicer solution, it's often difficult
to turn on in practice globally as many widely distributed packages
don't work with LFS on.

Other storage systems have their own workarounds, with SCSI making
multiple device majors and MMC having a config option for the number
of partitions per device. A completely dynamic minor numbering is
simpler than these. It is unlikely that anyone is depending on a
static minor number since the major is dynamic anyway. In addition,
ubiblock is still relatively new, so now is the time to make such
changes.

Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-06-02 11:35:49 +02:00
Tero Kristo
989feafb84 clk: ti: move low-level access and init code under clock driver
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo
e3aedf0234 ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs
As most of the clock driver code has migrated, these are no longer used
for anything. Thus remove these APIs completely.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo
e9e63088e4 clk: ti: remove exported ll_ops struct, instead add an API for registration
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo
9e11814ab8 ARM: OMAP2+: clock: remove dead definitions from the clock header file
Cleanup the mess in clock.h by removing all definitions that are no longer
used for anything.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo
a3314e9cf6 clk: ti: move some public definitions to private header
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo
c9a58b0a84 clk: ti: am3517: move remaining am3517 clock support code to clock driver
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo
eb0572520d ARM: OMAP4: clock: remove clock44xx.h header
This is not needed for anything anymore, so remove it completely.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:38 +03:00
Tero Kristo
f2671d5c6c clk: ti: omap34xx: move omap34xx clock type support code to clock driver
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:37 +03:00
Tero Kristo
bd86cfdcbd clk: ti: clkdm: move clkdm gate clock support code to clock driver
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:30 +03:00
Tero Kristo
d5a04dddf5 clk: ti: omap2430: move clock support code under clock driver
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:29 +03:00
Tero Kristo
9f37e90efa clk: ti: dflt: move support for default gate clock to clock driver
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:22 +03:00
Tero Kristo
046b7c3166 ARM: OMAP2+: clock: remove clkdm_control static boolean from code
clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:21 +03:00
Tero Kristo
6f0051da4b ARM: OMAP3: clock: remove clock3xxx.c file
This now only has a couple of variables within it, which are used outside
the file itself. Move these variables to where they are actually used,
and remove the file completely as it is now empty.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:14 +03:00
Tero Kristo
0565fb168d clk: ti: dpll: move omap3 DPLL functionality to clock driver
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:14 +03:00