Commit graph

5,785 commits

Author SHA1 Message Date
Fuad Tabba
2fd5b4b0e7 KVM: arm64: Calculate cptr_el2 traps on activating traps
Similar to VHE, calculate the value of cptr_el2 from scratch on
activate traps. This removes the need to store cptr_el2 in every
vcpu structure. Moreover, some traps, such as whether the guest
owns the fp registers, need to be set on every vcpu run.

Reported-by: James Clark <james.clark@linaro.org>
Fixes: 5294afdbf4 ("KVM: arm64: Exclude FP ownership from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-13-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 13:53:57 +00:00
Fuad Tabba
3d7ff00700 KVM: arm64: Rework specifying restricted features for protected VMs
The existing code didn't properly distinguish between signed and
unsigned features, and was difficult to read and to maintain.
Rework it using the same method used in other parts of KVM when
handling vcpu features.

Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 13:53:01 +00:00
Fuad Tabba
a3163dca48 KVM: arm64: Use KVM extension checks for allowed protected VM capabilities
Use KVM extension checks as the source for determining which
capabilities are allowed for protected VMs. KVM extension checks
is the natural place for this, since it is also the interface
exposed to users.

Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241216105057.579031-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 13:45:25 +00:00
Quentin Perret
fce886a602 KVM: arm64: Plumb the pKVM MMU in KVM
Introduce the KVM_PGT_CALL() helper macro to allow switching from the
traditional pgtable code to the pKVM version easily in mmu.c. The cost
of this 'indirection' is expected to be very minimal due to
is_protected_kvm_enabled() being backed by a static key.

With this, everything is in place to allow the delegation of
non-protected guest stage-2 page-tables to pKVM, so let's stop using the
host's kvm_s2_mmu from EL2 and enjoy the ride.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-19-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
e912efed48 KVM: arm64: Introduce the EL1 pKVM MMU
Introduce a set of helper functions allowing to manipulate the pKVM
guest stage-2 page-tables from EL1 using pKVM's HVC interface.

Each helper has an exact one-to-one correspondance with the traditional
kvm_pgtable_stage2_*() functions from pgtable.c, with a strictly
matching prototype. This will ease plumbing later on in mmu.c.

These callbacks track the gfn->pfn mappings in a simple rb_tree indexed
by IPA in lieu of a page-table. This rb-tree is kept in sync with pKVM's
state and is protected by the mmu_lock like a traditional stage-2
page-table.

Signed-off-by: Quentin Perret <qperret@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-18-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
0adce4d42f KVM: arm64: Introduce __pkvm_tlb_flush_vmid()
Introduce a new hypercall to flush the TLBs of non-protected guests. The
host kernel will be responsible for issuing this hypercall after changing
stage-2 permissions using the __pkvm_host_relax_guest_perms() or
__pkvm_host_wrprotect_guest() paths. This is left under the host's
responsibility for performance reasons.

Note however that the TLB maintenance for all *unmap* operations still
remains entirely under the hypervisor's responsibility for security
reasons -- an unmapped page may be donated to another entity, so a stale
TLB entry could be used to leak private data.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-17-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
76f0b18b3d KVM: arm64: Introduce __pkvm_host_mkyoung_guest()
Plumb the kvm_pgtable_stage2_mkyoung() callback into pKVM for
non-protected guests. It will be called later from the fault handling
path.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-16-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
56ab4de37f KVM: arm64: Introduce __pkvm_host_test_clear_young_guest()
Plumb the kvm_stage2_test_clear_young() callback into pKVM for
non-protected guest. It will be later be called from MMU notifiers.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-15-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
26117e4c63 KVM: arm64: Introduce __pkvm_host_wrprotect_guest()
Introduce a new hypercall to remove the write permission from a
non-protected guest stage-2 mapping. This will be used for e.g. enabling
dirty logging.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-14-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
34884a0a4a KVM: arm64: Introduce __pkvm_host_relax_guest_perms()
Introduce a new hypercall allowing the host to relax the stage-2
permissions of mappings in a non-protected guest page-table. It will be
used later once we start allowing RO memslots and dirty logging.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-13-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
72db3d3fba KVM: arm64: Introduce __pkvm_host_unshare_guest()
In preparation for letting the host unmap pages from non-protected
guests, introduce a new hypercall implementing the host-unshare-guest
transition.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-12-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
d0bd3e6570 KVM: arm64: Introduce __pkvm_host_share_guest()
In preparation for handling guest stage-2 mappings at EL2, introduce a
new pKVM hypercall allowing to share pages with non-protected guests.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-11-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Marc Zyngier
f7d03fcbf1 KVM: arm64: Introduce __pkvm_vcpu_{load,put}()
Rather than look-up the hyp vCPU on every run hypercall at EL2,
introduce a per-CPU 'loaded_hyp_vcpu' tracking variable which is updated
by a pair of load/put hypercalls called directly from
kvm_arch_vcpu_{load,put}() when pKVM is enabled.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-10-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
c77e5181fe KVM: arm64: Make kvm_pgtable_stage2_init() a static inline function
Turn kvm_pgtable_stage2_init() into a static inline function instead of
a macro. This will allow the usage of typeof() on it later on.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-8-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
e279c25d78 KVM: arm64: Pass walk flags to kvm_pgtable_stage2_relax_perms
kvm_pgtable_stage2_relax_perms currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM. To
allow for the re-use of that function, make the walk flags one of its
parameters.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:44:00 +00:00
Quentin Perret
5398ddc5c9 KVM: arm64: Pass walk flags to kvm_pgtable_stage2_mkyoung
kvm_pgtable_stage2_mkyoung currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM.
To allow for the re-use of that function, make the walk flags one of
its parameters.

Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:43:59 +00:00
Oliver Upton
8c02c2bbd6 KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore
Similar to other per-CPU profiling/debug features we handle, store the
number of breakpoints/watchpoints in kvm_host_data to avoid reading the
ID register 4 times on every guest entry/exit. And if you're in the
nested virt business that's quite a few avoidable exits to the L0
hypervisor.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:04:14 +00:00
Oliver Upton
b0ee51033a KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions
Inject debug exceptions into vEL2 if MDCR_EL2.TDE is set.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:04:11 +00:00
Marc Zyngier
2ca3f03bf5 KVM: arm64: Manage software step state at load/put
KVM takes over the guest's software step state machine if the VMM is
debugging the guest, but it does the save/restore fiddling for every
guest entry.

Note that the only constraint on host usage of software step is that the
guest's configuration remains visible to userspace via the ONE_REG
ioctls. So, we can cut down on the amount of fiddling by doing this at
load/put instead.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-16-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:04:06 +00:00
Oliver Upton
4ad3a0b87f KVM: arm64: Don't hijack guest context MDSCR_EL1
Stealing MDSCR_EL1 in the guest's kvm_cpu_context for external debugging
is rather gross. Just add a field for this instead and let the context
switch code pick the correct one based on the debug owner.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:02:51 +00:00
Oliver Upton
75a5fbaf66 KVM: arm64: Compute MDCR_EL2 at vcpu_load()
KVM has picked up several hacks to cope with vcpu->arch.mdcr_el2 needing
to be prepared before vcpu_load(), which is when it gets programmed
into hardware on VHE.

Now that the flows for reprogramming MDCR_EL2 have been simplified, move
that computation to vcpu_load().

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:01:25 +00:00
Oliver Upton
06d22a9c1b KVM: arm64: Reload vCPU for accesses to OSLAR_EL1
KVM takes ownership of the debug regs if the guest enables the OS lock,
as it needs to use MDSCR_EL1 to mask debug exceptions. Just reload the
vCPU if the guest toggles the OS lock, relying on kvm_vcpu_load_debug()
to update the debug owner and get the right trap configuration in place.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-13-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:01:25 +00:00
Oliver Upton
beb470d96c KVM: arm64: Use debug_owner to track if debug regs need save/restore
Use the debug owner to determine if the debug regs are in use instead of
keeping around the DEBUG_DIRTY flag. Debug registers are now
saved/restored after the first trap, regardless of whether it was a read
or a write. This also shifts the point at which KVM becomes lazy to
vcpu_put() rather than the next exception taken from the guest.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-12-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:01:25 +00:00
Oliver Upton
803602b0d9 KVM: arm64: Remove vestiges of debug_ptr
Delete the remnants of debug_ptr now that debug registers are selected
based on the debug owner instead.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-11-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:01:25 +00:00
Oliver Upton
58db67e9ac KVM: arm64: Select debug state to save/restore based on debug owner
Select the set of debug registers to use based on the owner rather than
relying on debug_ptr. Besides the code cleanup, this allows us to
eliminate a couple instances kern_hyp_va() as well.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-9-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:01:25 +00:00
Oliver Upton
cd9b10102a KVM: arm64: Evaluate debug owner at vcpu_load()
In preparation for tossing the debug_ptr mess, introduce an enumeration
to track the ownership of the debug registers while in the guest. Update
the owner at vcpu_load() based on whether the host needs to steal the
guest's debug context or if breakpoints/watchpoints are actively in use.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-7-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 09:01:25 +00:00
Oliver Upton
d381e53384 KVM: arm64: Move host SME/SVE tracking flags to host data
The SME/SVE state tracking flags have no business in the vCPU. Move them
to kvm_host_data.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-5-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 08:49:09 +00:00
Oliver Upton
38131c02a5 KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of vCPU
Add flags to kvm_host_data to track if SPE/TRBE is present +
programmable on a per-CPU basis. Set the flags up at init rather than
vcpu_load() as the programmability of these buffers is unlikely to
change.

Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 08:49:09 +00:00
Oliver Upton
2417218f2f KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts
KVM caches MDCR_EL2 on a per-CPU basis in order to preserve the
configuration of MDCR_EL2.HPMN while running a guest. This is a bit
gross, since we're relying on some baked configuration rather than the
hardware definition of implemented counters.

Discover the number of implemented counters by reading PMCR_EL0.N
instead. This works because:

 - In VHE the kernel runs at EL2, and N always returns the number of
   counters implemented in hardware

 - In {n,h}VHE, the EL2 setup code programs MDCR_EL2.HPMN with the EL2
   view of PMCR_EL0.N for the host

Lastly, avoid traps under nested virtualization by saving PMCR_EL0.N in
host data.

Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-20 08:49:08 +00:00
Marc Zyngier
e5ecedcd7c arm64/sysreg: Get rid of CPACR_ELx SysregFields
There is no such thing as CPACR_ELx in the architecture.
What we have is CPACR_EL1, for which CPTR_EL12 is an accessor.

Rename CPACR_ELx_* to CPACR_EL1_*, and fix the bit of code using
these names.

Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241219173351.1123087-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-19 18:00:58 +00:00
Ard Biesheuvel
62cffa496a arm64/mm: Override PARange for !LPA2 and use it consistently
When FEAT_LPA{,2} are not implemented, the ID_AA64MMFR0_EL1.PARange and
TCR.IPS values corresponding with 52-bit physical addressing are
reserved.

Setting the TCR.IPS field to 0b110 (52-bit physical addressing) has side
effects, such as how the TTBRn_ELx.BADDR fields are interpreted, and so
it is important that disabling FEAT_LPA2 (by overriding the
ID_AA64MMFR0.TGran fields) also presents a PARange field consistent with
that.

So limit the field to 48 bits unless LPA2 is enabled, and update
existing references to use the override consistently.

Fixes: 352b0395b5 ("arm64: Enable 52-bit virtual addressing for 4k and 16k granule configs")
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241212081841.2168124-10-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-19 17:23:52 +00:00
Ard Biesheuvel
bf74bb73cd arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
Currently, LPA2 kernel support implies support for up to 52 bits of
physical addressing, and this is reflected in global definitions such as
PHYS_MASK_SHIFT and MAX_PHYSMEM_BITS.

This is potentially problematic, given that LPA2 hardware support is
modeled as a CPU feature which can be overridden, and with LPA2 hardware
support turned off, attempting to map physical regions with address bits
[51:48] set (which may exist on LPA2 capable systems booting with
arm64.nolva) will result in corrupted mappings with a truncated output
address and bogus shareability attributes.

This means that the accepted physical address range in the mapping
routines should be at most 48 bits wide when LPA2 support is configured
but not enabled at runtime.

Fixes: 352b0395b5 ("arm64: Enable 52-bit virtual addressing for 4k and 16k granule configs")
Cc: stable@vger.kernel.org
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241212081841.2168124-9-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-19 17:23:52 +00:00
Sean Christopherson
915d2f0718 KVM: Move KVM_REG_SIZE() definition to common uAPI header
Define KVM_REG_SIZE() in the common kvm.h header, and delete the arm64 and
RISC-V versions.  As evidenced by the surrounding definitions, all aspects
of the register size encoding are generic, i.e. RISC-V should have moved
arm64's definition to common code instead of copy+pasting.

Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-12-17 08:49:48 -08:00
Paolo Bonzini
3154bddf8c KVM/arm64 fixes for 6.13, part #2
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
    SPE/TRBE initialization
 
  - Align nested page table walker with the intended memory attribute
    combining rules of the architecture
 
  - Prevent userspace from constraining the advertised ASID width,
    avoiding horrors of guest TLBIs not matching the intended context in
    hardware
 
  - Don't leak references on LPIs when insertion into the translation
    cache fails
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZ0+mZhccb2xpdmVyLnVw
 dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFuKcAQDnFcLru8MVor4zjloe25oPPeuW
 iBocGpgKwJMioHrAdwEAoq8v0eqfxrUpwr5KJ7iN9CTo9oANJYhVACC8jPHEowI=
 =fLPh
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.13, part #2

 - Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
   SPE/TRBE initialization

 - Align nested page table walker with the intended memory attribute
   combining rules of the architecture

 - Prevent userspace from constraining the advertised ASID width,
   avoiding horrors of guest TLBIs not matching the intended context in
   hardware

 - Don't leak references on LPIs when insertion into the translation
   cache fails
2024-12-10 08:50:55 -05:00
Mark Rutland
264a593da6 arm64: cpufeature: Add HAFT to cpucap_is_possible()
For consistency with other cpucaps, handle the configuration check for
ARM64_HAFT in cpucap_is_possible() rather than this being explicit in
system_supports_haft(). The configuration check will now happen
implicitly as cpus_have_final_cap() uses cpucap_is_possible() via
alternative_has_cap_unlikely().

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241209155948.2124393-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-10 12:10:09 +00:00
Zhu Jun
e281bd2299 arm64: asm: Fix typo in pgtable.h
The word 'trasferring' is wrong, so fix it.

Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241203093323.7831-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-10 11:34:45 +00:00
Anshuman Khandual
a0e33f528e arm64/mm: Replace open encodings with PXD_TABLE_BIT
[pgd|p4d]_bad() helpers have open encodings for their respective table bits
which can be replaced with corresponding macros. This makes things clearer,
thus improving their readability as well.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20241202083850.73207-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-10 11:32:57 +00:00
Anshuman Khandual
5f882f4aa8 arm64/mm: Drop INIT_MM_CONTEXT()
Platform override for INIT_MM_CONTEXT() is redundant because swapper_pg_dir
always gets assigned as the pgd during init_mm initialization. So just drop
this override on arm64.

Originally this override was added via the 'commit 2b5548b681 ("arm64/mm:
Separate boot-time page tables from swapper_pg_dir")' because non standard
init_pg_dir was assigned as the pgd. Subsequently it was changed as default
swapper_pg_dir by the 'commit ba5b0333a8 ("arm64: mm: omit redundant
remap of kernel image")', which might have also just dropped this override.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20241202043553.29592-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-12-10 11:32:26 +00:00
Robin Murphy
f00b53f161 arm64: cpufeature: Add GCS to cpucap_is_possible()
Since system_supports_gcs() ends up referring to cpucap_is_possible(),
teach the latter about GCS for consistency with similar features.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/416c7369fcdce4ebb2a8f12daae234507be27e38.1733406275.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-12-05 17:15:38 +00:00
Yang Shi
49ccf2c3ca arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
The commit 5de195060b ("mm: resolve faulty mmap_region() error path
behaviour") moved vm flags validation before fop->mmap for file
mappings.  But when commit 25c17c4b55 ("hugetlb: arm64: add mte support")
was rebased on top of it, the hugetlbfs part was missed.  Mmapping
hugetlbfs file may not have MAP_HUGETLB set.

Fixes: 25c17c4b55 ("hugetlb: arm64: add mte support")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241119200914.1145249-1-yang@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-12-02 11:48:14 +00:00
James Clark
d798bc6f3c arm64: Fix usage of new shifted MDCR_EL2 values
Since the linked fixes commit, these masks are already shifted so remove
the shifts. One issue that this fixes is SPE and TRBE not being
available anymore:

 arm_spe_pmu arm,spe-v1: profiling buffer owned by higher exception level

Fixes: 641630313e ("arm64: sysreg: Migrate MDCR_EL2 definition to table")
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241122164636.2944180-1-james.clark@linaro.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-11-26 06:31:36 -08:00
Linus Torvalds
f5f4745a7f - The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code.
 
 - The series "Improve the copy of task comm" from Yafang Shao addresses
   possible race-induced overflows in the management of task_struct.comm[].
 
 - The series "Remove unnecessary header includes from
   {tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
   small fix to the list_sort library code and to its selftest.
 
 - The series "Enhance min heap API with non-inline functions and
   optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
   min_heap library code.
 
 - The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
   finishes off nilfs2's folioification.
 
 - The series "add detect count for hung tasks" from Lance Yang adds more
   userspace visibility into the hung-task detector's activity.
 
 - Apart from that, singelton patches in many places - please see the
   individual changelogs for details.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ0L6lQAKCRDdBJ7gKXxA
 jmEIAPwMSglNPKRIOgzOvHh8MUJW1Dy8iKJ2kWCO3f6QTUIM2AEA+PazZbUd/g2m
 Ii8igH0UBibIgva7MrCyJedDI1O23AA=
 =8BIU
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - The series "resource: A couple of cleanups" from Andy Shevchenko
   performs some cleanups in the resource management code

 - The series "Improve the copy of task comm" from Yafang Shao addresses
   possible race-induced overflows in the management of
   task_struct.comm[]

 - The series "Remove unnecessary header includes from
   {tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
   small fix to the list_sort library code and to its selftest

 - The series "Enhance min heap API with non-inline functions and
   optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
   min_heap library code

 - The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
   finishes off nilfs2's folioification

 - The series "add detect count for hung tasks" from Lance Yang adds
   more userspace visibility into the hung-task detector's activity

 - Apart from that, singelton patches in many places - please see the
   individual changelogs for details

* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
  gdb: lx-symbols: do not error out on monolithic build
  kernel/reboot: replace sprintf() with sysfs_emit()
  lib: util_macros_kunit: add kunit test for util_macros.h
  util_macros.h: fix/rework find_closest() macros
  Improve consistency of '#error' directive messages
  ocfs2: fix uninitialized value in ocfs2_file_read_iter()
  hung_task: add docs for hung_task_detect_count
  hung_task: add detect count for hung tasks
  dma-buf: use atomic64_inc_return() in dma_buf_getfile()
  fs/proc/kcore.c: fix coccinelle reported ERROR instances
  resource: avoid unnecessary resource tree walking in __region_intersects()
  ocfs2: remove unused errmsg function and table
  ocfs2: cluster: fix a typo
  lib/scatterlist: use sg_phys() helper
  checkpatch: always parse orig_commit in fixes tag
  nilfs2: convert metadata aops from writepage to writepages
  nilfs2: convert nilfs_recovery_copy_block() to take a folio
  nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
  nilfs2: remove nilfs_writepage
  nilfs2: convert checkpoint file to be folio-based
  ...
2024-11-25 16:09:48 -08:00
Linus Torvalds
7f4f3b14e8 Add Rust support for trace events:
- Allow Rust code to have trace events
 
   Trace events is a popular way to debug what is happening inside the kernel
   or just to find out what is happening. Rust code is being added to the
   Linux kernel but it currently does not support the tracing infrastructure.
   Add support of trace events inside Rust code.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0DjqhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qrLlAPsF6t/c1nHSGTKDv9FJDJe4JHdP7e+U
 7X0S8BmSTKFNAQD+K2TEd0bjVP7ug8dQZBT+fveiFr+ARYxAwJ3JnEFjUwg=
 =Ab+T
 -----END PGP SIGNATURE-----

Merge tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull rust trace event support from Steven Rostedt:
 "Allow Rust code to have trace events

  Trace events is a popular way to debug what is happening inside the
  kernel or just to find out what is happening. Rust code is being added
  to the Linux kernel but it currently does not support the tracing
  infrastructure. Add support of trace events inside Rust code"

* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rust: jump_label: skip formatting generated file
  jump_label: rust: pass a mut ptr to `static_key_count`
  samples: rust: fix `rust_print` build making it a combined module
  rust: add arch_static_branch
  jump_label: adjust inline asm to be consistent
  rust: samples: add tracepoint to Rust sample
  rust: add tracepoint support
  rust: add static_branch_unlikely for static_key_false
2024-11-25 15:44:29 -08:00
Linus Torvalds
9f16d5e6f2 The biggest change here is eliminating the awful idea that KVM had, of
essentially guessing which pfns are refcounted pages.  The reason to
 do so was that KVM needs to map both non-refcounted pages (for example
 BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
 refcounted pages.  However, the result was security issues in the past,
 and more recently the inability to map VM_IO and VM_PFNMAP memory
 that _is_ backed by struct page but is not refcounted.  In particular
 this broke virtio-gpu blob resources (which directly map host graphics
 buffers into the guest as "vram" for the virtio-gpu device) with the
 amdgpu driver, because amdgpu allocates non-compound higher order pages
 and the tail pages could not be mapped into KVM.
 
 This requires adjusting all uses of struct page in the per-architecture
 code, to always work on the pfn whenever possible.  The large series that
 did this, from David Stevens and Sean Christopherson, also cleaned up
 substantially the set of functions that provided arch code with the
 pfn for a host virtual addresses.  The previous maze of twisty little
 passages, all different, is replaced by five functions (__gfn_to_page,
 __kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
 saving almost 200 lines of code.
 
 ARM:
 
 * Support for stage-1 permission indirection (FEAT_S1PIE) and
   permission overlays (FEAT_S1POE), including nested virt + the
   emulated page table walker
 
 * Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
   was introduced in PSCIv1.3 as a mechanism to request hibernation,
   similar to the S4 state in ACPI
 
 * Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
   part of it, introduce trivial initialization of the host's MPAM
   context so KVM can use the corresponding traps
 
 * PMU support under nested virtualization, honoring the guest
   hypervisor's trap configuration and event filtering when running a
   nested guest
 
 * Fixes to vgic ITS serialization where stale device/interrupt table
   entries are not zeroed when the mapping is invalidated by the VM
 
 * Avoid emulated MMIO completion if userspace has requested synchronous
   external abort injection
 
 * Various fixes and cleanups affecting pKVM, vCPU initialization, and
   selftests
 
 LoongArch:
 
 * Add iocsr and mmio bus simulation in kernel.
 
 * Add in-kernel interrupt controller emulation.
 
 * Add support for virtualization extensions to the eiointc irqchip.
 
 PPC:
 
 * Drop lingering and utterly obsolete references to PPC970 KVM, which was
   removed 10 years ago.
 
 * Fix incorrect documentation references to non-existing ioctls
 
 RISC-V:
 
 * Accelerate KVM RISC-V when running as a guest
 
 * Perf support to collect KVM guest statistics from host side
 
 s390:
 
 * New selftests: more ucontrol selftests and CPU model sanity checks
 
 * Support for the gen17 CPU model
 
 * List registers supported by KVM_GET/SET_ONE_REG in the documentation
 
 x86:
 
 * Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
   documentation, harden against unexpected changes.  Even if the hardware
   A/D tracking is disabled, it is possible to use the hardware-defined A/D
   bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
   of special cases.
 
 * Elide TLB flushes when aging secondary PTEs, as has been done in x86's
   primary MMU for over 10 years.
 
 * Recover huge pages in-place in the TDP MMU when dirty page logging is
   toggled off, instead of zapping them and waiting until the page is
   re-accessed to create a huge mapping.  This reduces vCPU jitter.
 
 * Batch TLB flushes when dirty page logging is toggled off.  This reduces
   the time it takes to disable dirty logging by ~3x.
 
 * Remove the shrinker that was (poorly) attempting to reclaim shadow page
   tables in low-memory situations.
 
 * Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
 
 * Advertise CPUIDs for new instructions in Clearwater Forest
 
 * Quirk KVM's misguided behavior of initialized certain feature MSRs to
   their maximum supported feature set, which can result in KVM creating
   invalid vCPU state.  E.g. initializing PERF_CAPABILITIES to a non-zero
   value results in the vCPU having invalid state if userspace hides PDCM
   from the guest, which in turn can lead to save/restore failures.
 
 * Fix KVM's handling of non-canonical checks for vCPUs that support LA57
   to better follow the "architecture", in quotes because the actual
   behavior is poorly documented.  E.g. most MSR writes and descriptor
   table loads ignore CR4.LA57 and operate purely on whether the CPU
   supports LA57.
 
 * Bypass the register cache when querying CPL from kvm_sched_out(), as
   filling the cache from IRQ context is generally unsafe; harden the
   cache accessors to try to prevent similar issues from occuring in the
   future.  The issue that triggered this change was already fixed in 6.12,
   but was still kinda latent.
 
 * Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
   over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
 
 * Minor cleanups
 
 * Switch hugepage recovery thread to use vhost_task.  These kthreads can
   consume significant amounts of CPU time on behalf of a VM or in response
   to how the VM behaves (for example how it accesses its memory); therefore
   KVM tried to place the thread in the VM's cgroups and charge the CPU
   time consumed by that work to the VM's container.  However the kthreads
   did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
   instances inside could not complete freezing.  Fix this by replacing the
   kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
   Another 100+ lines removed, with generally better behavior too like
   having these threads properly parented in the process tree.
 
 * Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
   really work; there was really nothing to work around anyway: the broken
   patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
   MSR is virtualized and therefore unaffected by the erratum.
 
 * Fix 6.12 regression where CONFIG_KVM will be built as a module even
   if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
 
 x86 selftests:
 
 * x86 selftests can now use AVX.
 
 Documentation:
 
 * Use rST internal links
 
 * Reorganize the introduction to the API document
 
 Generic:
 
 * Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
   of RCU, so that running a vCPU on a different task doesn't encounter long
   due to having to wait for all CPUs become quiescent.  In general both reads
   and writes are rare, but userspace that supports confidential computing is
   introducing the use of "helper" vCPUs that may jump from one host processor
   to another.  Those will be very happy to trigger a synchronize_rcu(), and
   the effect on performance is quite the disaster.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
 dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
 letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
 1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
 t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
 ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
 =lWpE
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "The biggest change here is eliminating the awful idea that KVM had of
  essentially guessing which pfns are refcounted pages.

  The reason to do so was that KVM needs to map both non-refcounted
  pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
  VMAs that contain refcounted pages.

  However, the result was security issues in the past, and more recently
  the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
  struct page but is not refcounted. In particular this broke virtio-gpu
  blob resources (which directly map host graphics buffers into the
  guest as "vram" for the virtio-gpu device) with the amdgpu driver,
  because amdgpu allocates non-compound higher order pages and the tail
  pages could not be mapped into KVM.

  This requires adjusting all uses of struct page in the
  per-architecture code, to always work on the pfn whenever possible.
  The large series that did this, from David Stevens and Sean
  Christopherson, also cleaned up substantially the set of functions
  that provided arch code with the pfn for a host virtual addresses.

  The previous maze of twisty little passages, all different, is
  replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
  non-__ versions of these two, and kvm_prefetch_pages) saving almost
  200 lines of code.

  ARM:

   - Support for stage-1 permission indirection (FEAT_S1PIE) and
     permission overlays (FEAT_S1POE), including nested virt + the
     emulated page table walker

   - Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
     call was introduced in PSCIv1.3 as a mechanism to request
     hibernation, similar to the S4 state in ACPI

   - Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
     part of it, introduce trivial initialization of the host's MPAM
     context so KVM can use the corresponding traps

   - PMU support under nested virtualization, honoring the guest
     hypervisor's trap configuration and event filtering when running a
     nested guest

   - Fixes to vgic ITS serialization where stale device/interrupt table
     entries are not zeroed when the mapping is invalidated by the VM

   - Avoid emulated MMIO completion if userspace has requested
     synchronous external abort injection

   - Various fixes and cleanups affecting pKVM, vCPU initialization, and
     selftests

  LoongArch:

   - Add iocsr and mmio bus simulation in kernel.

   - Add in-kernel interrupt controller emulation.

   - Add support for virtualization extensions to the eiointc irqchip.

  PPC:

   - Drop lingering and utterly obsolete references to PPC970 KVM, which
     was removed 10 years ago.

   - Fix incorrect documentation references to non-existing ioctls

  RISC-V:

   - Accelerate KVM RISC-V when running as a guest

   - Perf support to collect KVM guest statistics from host side

  s390:

   - New selftests: more ucontrol selftests and CPU model sanity checks

   - Support for the gen17 CPU model

   - List registers supported by KVM_GET/SET_ONE_REG in the
     documentation

  x86:

   - Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
     improve documentation, harden against unexpected changes.

     Even if the hardware A/D tracking is disabled, it is possible to
     use the hardware-defined A/D bits to track if a PFN is Accessed
     and/or Dirty, and that removes a lot of special cases.

   - Elide TLB flushes when aging secondary PTEs, as has been done in
     x86's primary MMU for over 10 years.

   - Recover huge pages in-place in the TDP MMU when dirty page logging
     is toggled off, instead of zapping them and waiting until the page
     is re-accessed to create a huge mapping. This reduces vCPU jitter.

   - Batch TLB flushes when dirty page logging is toggled off. This
     reduces the time it takes to disable dirty logging by ~3x.

   - Remove the shrinker that was (poorly) attempting to reclaim shadow
     page tables in low-memory situations.

   - Clean up and optimize KVM's handling of writes to
     MSR_IA32_APICBASE.

   - Advertise CPUIDs for new instructions in Clearwater Forest

   - Quirk KVM's misguided behavior of initialized certain feature MSRs
     to their maximum supported feature set, which can result in KVM
     creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
     a non-zero value results in the vCPU having invalid state if
     userspace hides PDCM from the guest, which in turn can lead to
     save/restore failures.

   - Fix KVM's handling of non-canonical checks for vCPUs that support
     LA57 to better follow the "architecture", in quotes because the
     actual behavior is poorly documented. E.g. most MSR writes and
     descriptor table loads ignore CR4.LA57 and operate purely on
     whether the CPU supports LA57.

   - Bypass the register cache when querying CPL from kvm_sched_out(),
     as filling the cache from IRQ context is generally unsafe; harden
     the cache accessors to try to prevent similar issues from occuring
     in the future. The issue that triggered this change was already
     fixed in 6.12, but was still kinda latent.

   - Advertise AMD_IBPB_RET to userspace, and fix a related bug where
     KVM over-advertises SPEC_CTRL when trying to support cross-vendor
     VMs.

   - Minor cleanups

   - Switch hugepage recovery thread to use vhost_task.

     These kthreads can consume significant amounts of CPU time on
     behalf of a VM or in response to how the VM behaves (for example
     how it accesses its memory); therefore KVM tried to place the
     thread in the VM's cgroups and charge the CPU time consumed by that
     work to the VM's container.

     However the kthreads did not process SIGSTOP/SIGCONT, and therefore
     cgroups which had KVM instances inside could not complete freezing.

     Fix this by replacing the kthread with a PF_USER_WORKER thread, via
     the vhost_task abstraction. Another 100+ lines removed, with
     generally better behavior too like having these threads properly
     parented in the process tree.

   - Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
     didn't really work; there was really nothing to work around anyway:
     the broken patch was meant to fix nested virtualization, but the
     PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
     erratum.

   - Fix 6.12 regression where CONFIG_KVM will be built as a module even
     if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
     'y'.

  x86 selftests:

   - x86 selftests can now use AVX.

  Documentation:

   - Use rST internal links

   - Reorganize the introduction to the API document

  Generic:

   - Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
     instead of RCU, so that running a vCPU on a different task doesn't
     encounter long due to having to wait for all CPUs become quiescent.

     In general both reads and writes are rare, but userspace that
     supports confidential computing is introducing the use of "helper"
     vCPUs that may jump from one host processor to another. Those will
     be very happy to trigger a synchronize_rcu(), and the effect on
     performance is quite the disaster"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
  KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
  KVM: x86: add back X86_LOCAL_APIC dependency
  Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
  KVM: x86: switch hugepage recovery thread to vhost_task
  KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
  x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
  Documentation: KVM: fix malformed table
  irqchip/loongson-eiointc: Add virt extension support
  LoongArch: KVM: Add irqfd support
  LoongArch: KVM: Add PCHPIC user mode read and write functions
  LoongArch: KVM: Add PCHPIC read and write functions
  LoongArch: KVM: Add PCHPIC device support
  LoongArch: KVM: Add EIOINTC user mode read and write functions
  LoongArch: KVM: Add EIOINTC read and write functions
  LoongArch: KVM: Add EIOINTC device support
  LoongArch: KVM: Add IPI user mode read and write function
  LoongArch: KVM: Add IPI read and write function
  LoongArch: KVM: Add IPI device support
  LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
  KVM: arm64: Pass on SVE mapping failures
  ...
2024-11-23 16:00:50 -08:00
Linus Torvalds
5c00ff742b - The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
   This leads to improved memory savings.
 
 - Wei Yang has gone to town on the mapletree code, contributing several
   series which clean up the implementation:
 
 	- "refine mas_mab_cp()"
 	- "Reduce the space to be cleared for maple_big_node"
 	- "maple_tree: simplify mas_push_node()"
 	- "Following cleanup after introduce mas_wr_store_type()"
 	- "refine storing null"
 
 - The series "selftests/mm: hugetlb_fault_after_madv improvements" from
   David Hildenbrand fixes this selftest for s390.
 
 - The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
   implements some rationaizations and cleanups in the page mapping code.
 
 - The series "mm: optimize shadow entries removal" from Shakeel Butt
   optimizes the file truncation code by speeding up the handling of shadow
   entries.
 
 - The series "Remove PageKsm()" from Matthew Wilcox completes the
   migration of this flag over to being a folio-based flag.
 
 - The series "Unify hugetlb into arch_get_unmapped_area functions" from
   Oscar Salvador implements a bunch of consolidations and cleanups in the
   hugetlb code.
 
 - The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
   takes away the wp-fault time practice of turning a huge zero page into
   small pages.  Instead we replace the whole thing with a THP.  More
   consistent cleaner and potentiall saves a large number of pagefaults.
 
 - The series "percpu: Add a test case and fix for clang" from Andy
   Shevchenko enhances and fixes the kernel's built in percpu test code.
 
 - The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
   optimizes mremap() by avoiding doing things which we didn't need to do.
 
 - The series "Improve the tmpfs large folio read performance" from
   Baolin Wang teaches tmpfs to copy data into userspace at the folio size
   rather than as individual pages.  A 20% speedup was observed.
 
 - The series "mm/damon/vaddr: Fix issue in
   damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
 
 - The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
   removes the long-deprecated memcgv2 charge moving feature.
 
 - The series "fix error handling in mmap_region() and refactor" from
   Lorenzo Stoakes cleanup up some of the mmap() error handling and
   addresses some potential performance issues.
 
 - The series "x86/module: use large ROX pages for text allocations" from
   Mike Rapoport teaches x86 to use large pages for read-only-execute
   module text.
 
 - The series "page allocation tag compression" from Suren Baghdasaryan
   is followon maintenance work for the new page allocation profiling
   feature.
 
 - The series "page->index removals in mm" from Matthew Wilcox remove
   most references to page->index in mm/.  A slow march towards shrinking
   struct page.
 
 - The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
   interface tests" from Andrew Paniakin performs maintenance work for
   DAMON's self testing code.
 
 - The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
   improves zswap's batching of compression and decompression.  It is a
   step along the way towards using Intel IAA hardware acceleration for
   this zswap operation.
 
 - The series "kasan: migrate the last module test to kunit" from
   Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
   over to the KUnit framework.
 
 - The series "implement lightweight guard pages" from Lorenzo Stoakes
   permits userapace to place fault-generating guard pages within a single
   VMA, rather than requiring that multiple VMAs be created for this.
   Improved efficiencies for userspace memory allocators are expected.
 
 - The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
   tracepoints to provide increased visibility into memcg stats flushing
   activity.
 
 - The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
   fixes a zram buglet which potentially affected performance.
 
 - The series "mm: add more kernel parameters to control mTHP" from
   Maíra Canal enhances our ability to control/configuremultisize THP from
   the kernel boot command line.
 
 - The series "kasan: few improvements on kunit tests" from Sabyrzhan
   Tasbolatov has a couple of fixups for the KASAN KUnit tests.
 
 - The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
   from Kairui Song optimizes list_lru memory utilization when lockdep is
   enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
 jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
 xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
 =JfWR
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - The series "zram: optimal post-processing target selection" from
   Sergey Senozhatsky improves zram's post-processing selection
   algorithm. This leads to improved memory savings.

 - Wei Yang has gone to town on the mapletree code, contributing several
   series which clean up the implementation:
	- "refine mas_mab_cp()"
	- "Reduce the space to be cleared for maple_big_node"
	- "maple_tree: simplify mas_push_node()"
	- "Following cleanup after introduce mas_wr_store_type()"
	- "refine storing null"

 - The series "selftests/mm: hugetlb_fault_after_madv improvements" from
   David Hildenbrand fixes this selftest for s390.

 - The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
   implements some rationaizations and cleanups in the page mapping
   code.

 - The series "mm: optimize shadow entries removal" from Shakeel Butt
   optimizes the file truncation code by speeding up the handling of
   shadow entries.

 - The series "Remove PageKsm()" from Matthew Wilcox completes the
   migration of this flag over to being a folio-based flag.

 - The series "Unify hugetlb into arch_get_unmapped_area functions" from
   Oscar Salvador implements a bunch of consolidations and cleanups in
   the hugetlb code.

 - The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
   takes away the wp-fault time practice of turning a huge zero page
   into small pages. Instead we replace the whole thing with a THP. More
   consistent cleaner and potentiall saves a large number of pagefaults.

 - The series "percpu: Add a test case and fix for clang" from Andy
   Shevchenko enhances and fixes the kernel's built in percpu test code.

 - The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
   optimizes mremap() by avoiding doing things which we didn't need to
   do.

 - The series "Improve the tmpfs large folio read performance" from
   Baolin Wang teaches tmpfs to copy data into userspace at the folio
   size rather than as individual pages. A 20% speedup was observed.

 - The series "mm/damon/vaddr: Fix issue in
   damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
   splitting.

 - The series "memcg-v1: fully deprecate charge moving" from Shakeel
   Butt removes the long-deprecated memcgv2 charge moving feature.

 - The series "fix error handling in mmap_region() and refactor" from
   Lorenzo Stoakes cleanup up some of the mmap() error handling and
   addresses some potential performance issues.

 - The series "x86/module: use large ROX pages for text allocations"
   from Mike Rapoport teaches x86 to use large pages for
   read-only-execute module text.

 - The series "page allocation tag compression" from Suren Baghdasaryan
   is followon maintenance work for the new page allocation profiling
   feature.

 - The series "page->index removals in mm" from Matthew Wilcox remove
   most references to page->index in mm/. A slow march towards shrinking
   struct page.

 - The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
   interface tests" from Andrew Paniakin performs maintenance work for
   DAMON's self testing code.

 - The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
   improves zswap's batching of compression and decompression. It is a
   step along the way towards using Intel IAA hardware acceleration for
   this zswap operation.

 - The series "kasan: migrate the last module test to kunit" from
   Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
   tests over to the KUnit framework.

 - The series "implement lightweight guard pages" from Lorenzo Stoakes
   permits userapace to place fault-generating guard pages within a
   single VMA, rather than requiring that multiple VMAs be created for
   this. Improved efficiencies for userspace memory allocators are
   expected.

 - The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
   tracepoints to provide increased visibility into memcg stats flushing
   activity.

 - The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
   fixes a zram buglet which potentially affected performance.

 - The series "mm: add more kernel parameters to control mTHP" from
   Maíra Canal enhances our ability to control/configuremultisize THP
   from the kernel boot command line.

 - The series "kasan: few improvements on kunit tests" from Sabyrzhan
   Tasbolatov has a couple of fixups for the KASAN KUnit tests.

 - The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
   from Kairui Song optimizes list_lru memory utilization when lockdep
   is enabled.

* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
  cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
  mm/kfence: add a new kunit test test_use_after_free_read_nofault()
  zram: fix NULL pointer in comp_algorithm_show()
  memcg/hugetlb: add hugeTLB counters to memcg
  vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
  mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
  zram: ZRAM_DEF_COMP should depend on ZRAM
  MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
  Docs/mm/damon: recommend academic papers to read and/or cite
  mm: define general function pXd_init()
  kmemleak: iommu/iova: fix transient kmemleak false positive
  mm/list_lru: simplify the list_lru walk callback function
  mm/list_lru: split the lock to per-cgroup scope
  mm/list_lru: simplify reparenting and initial allocation
  mm/list_lru: code clean up for reparenting
  mm/list_lru: don't export list_lru_add
  mm/list_lru: don't pass unnecessary key parameters
  kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
  kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
  kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
  ...
2024-11-23 09:58:07 -08:00
Linus Torvalds
79caa6c88a asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the
 architecture specific header files:
 
  - A series from Al Viro simplifies asm/vga.h, after it turns out that
    most of it can be generalized.
 
  - A series from Julian Vetter adds a common version of
    memcpy_{to,from}io() and memset_io() and changes most architectures
    to use that instead of their own implementation
 
  - A series from Niklas Schnelle concludes his work to make PC
    style inb()/outb() optional
 
  - Nicolas Pitre contributes improvements for the generic do_div()
    helper
 
  - Christoph Hellwig adds a generic version of page_to_phys()
    and phys_to_page(), replacing the slightly different architecture
    specific definitions.
 
  - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+Z0gACgkQYKtH/8kJ
 UicqzA/8CcqVdcWKlFAyiFI62DCkd3iYm/joNK3/JhvUIvVFvY+HI0+XpTeOEN1r
 dfYBNg/KTVSbia5MEEy28Lk5WdoA3X7p9E8NuYC1ik/qvH3Y0kXDU2NiRcJDwalq
 u56tGUwDITFUzRo47a4Z53JpV60FlGaUVjuKp1jJiOQkcs/iussVYuti8mNVb1ud
 1tf21TEAIywq43IC8CxevIRsBkJBqMhalaGWYgKw3ZTwXdiKaXed6RH7IjPodanN
 6b7R6aFEqlT7usFX9vLOYNRGzd3HIueXOT1iqiiGI1lm5u/iutxKH+8eS4q381oN
 WJL0jQdo4sv2MxtSHYrjpzPRQpSp/qrin29h3PVjwBjZF3i5WvFeTYgfjQEEkqe0
 fpTXjUsr5n1F1pGV90DtJHwaD5TxKD4VYFLDRCDGUiAnWPkZ7EYUBL3SA6GqEkXB
 1lVRPsEBo0y867/WQcoCZA/x7ANZDI6bDZ6fjumwx8OCZOHZeN6FGtqQJHcVZR5O
 +nu/j3I8YH1tZGKbA+wliyQwt/T60Oxs62HHcFzFLGakARwUEDYO53IGCJUByFwk
 kCrgNVvzFklwWpqqyTADqb5lkQKpZr5gIdpst185qttCQkb+EFWiCi9w2inXTjHl
 2oCc7Uf0cvoxnhVlJAw73eGTtpqS37KCWK+iNyrQbOfy+hgIv+w=
 =zEHk
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "These are a number of unrelated cleanups, generally simplifying the
  architecture specific header files:

   - A series from Al Viro simplifies asm/vga.h, after it turns out that
     most of it can be generalized.

   - A series from Julian Vetter adds a common version of
     memcpy_{to,from}io() and memset_io() and changes most architectures
     to use that instead of their own implementation

   - A series from Niklas Schnelle concludes his work to make PC style
     inb()/outb() optional

   - Nicolas Pitre contributes improvements for the generic do_div()
     helper

   - Christoph Hellwig adds a generic version of page_to_phys() and
     phys_to_page(), replacing the slightly different architecture
     specific definitions.

   - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"

* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
  empty include/asm-generic/vga.h
  sparc: get rid of asm/vga.h
  asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
  vt_buffer.h: get rid of dead code in default scr_...() instances
  tty: serial: export serial_8250_warn_need_ioport
  lib/iomem_copy: fix kerneldoc format style
  hexagon: simplify asm/io.h for !HAS_IOPORT
  loongarch: Use new fallback IO memcpy/memset
  csky: Use new fallback IO memcpy/memset
  arm64: Use new fallback IO memcpy/memset
  New implementation for IO memcpy and IO memset
  watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
  __arch_xprod64(): make __always_inline when optimizing for performance
  ARM: div64: improve __arch_xprod_64()
  asm-generic/div64: optimize/simplify __div64_const32()
  lib/math/test_div64: add some edge cases relevant to __div64_const32()
  asm-generic: add an optional pfn_valid check to page_to_phys
  asm-generic: provide generic page_to_phys and phys_to_page implementations
  asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
  tty: serial: handle HAS_IOPORT dependencies
  ...
2024-11-20 15:13:02 -08:00
Linus Torvalds
aad3a0d084 ftrace updates for v6.13:
- Merged tag ftrace-v6.12-rc4
 
   There was a fix to locking in register_ftrace_graph() for shadow stacks
   that was sent upstream. But this code was also being rewritten, and the
   locking fix was needed. Merging this fix was required to continue the
   work.
 
 - Restructure the function graph shadow stack to prepare it for use with
   kretprobes
 
   With the goal of merging the shadow stack logic of function graph and
   kretprobes, some more restructuring of the function shadow stack is
   required.
 
   Move out function graph specific fields from the fgraph infrastructure and
   store it on the new stack variables that can pass data from the entry
   callback to the exit callback.
 
   Hopefully, with this change, the merge of kretprobes to use fgraph shadow
   stacks will be ready by the next merge window.
 
 - Make shadow stack 4k instead of using PAGE_SIZE.
 
   Some architectures have very large PAGE_SIZE values which make its use for
   shadow stacks waste a lot of memory.
 
 - Give shadow stacks its own kmem cache.
 
   When function graph is started, every task on the system gets a shadow
   stack. In the future, shadow stacks may not be 4K in size. Have it have
   its own kmem cache so that whatever size it becomes will still be
   efficient in allocations.
 
 - Initialize profiler graph ops as it will be needed for new updates to fgraph
 
 - Convert to use guard(mutex) for several ftrace and fgraph functions
 
 - Add more comments and documentation
 
 - Show function return address in function graph tracer
 
   Add an option to show the caller of a function at each entry of the
   function graph tracer, similar to what the function tracer does.
 
 - Abstract out ftrace_regs from being used directly like pt_regs
 
   ftrace_regs was created to store a partial pt_regs. It holds only the
   registers and stack information to get to the function arguments and
   return values. On several archs, it is simply a wrapper around pt_regs.
   But some users would access ftrace_regs directly to get the pt_regs which
   will not work on all archs. Make ftrace_regs an abstract structure that
   requires all access to its fields be through accessor functions.
 
 - Show how long it takes to do function code modifications
 
   When code modification for function hooks happen, it always had the time
   recorded in how long it took to do the conversion. But this value was
   never exported. Recently the code was touched due to new ROX modification
   handling that caused a large slow down in doing the modifications and
   had a significant impact on boot times.
 
   Expose the timings in the dyn_ftrace_total_info file. This file was
   created a while ago to show information about memory usage and such to
   implement dynamic function tracing. It's also an appropriate file to store
   the timings of this modification as well. This will make it easier to see
   the impact of changes to code modification on boot up timings.
 
 - Other clean ups and small fixes
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn
 SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY=
 =6nCa
 -----END PGP SIGNATURE-----

Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull ftrace updates from Steven Rostedt:

 - Restructure the function graph shadow stack to prepare it for use
   with kretprobes

   With the goal of merging the shadow stack logic of function graph and
   kretprobes, some more restructuring of the function shadow stack is
   required.

   Move out function graph specific fields from the fgraph
   infrastructure and store it on the new stack variables that can pass
   data from the entry callback to the exit callback.

   Hopefully, with this change, the merge of kretprobes to use fgraph
   shadow stacks will be ready by the next merge window.

 - Make shadow stack 4k instead of using PAGE_SIZE.

   Some architectures have very large PAGE_SIZE values which make its
   use for shadow stacks waste a lot of memory.

 - Give shadow stacks its own kmem cache.

   When function graph is started, every task on the system gets a
   shadow stack. In the future, shadow stacks may not be 4K in size.
   Have it have its own kmem cache so that whatever size it becomes will
   still be efficient in allocations.

 - Initialize profiler graph ops as it will be needed for new updates to
   fgraph

 - Convert to use guard(mutex) for several ftrace and fgraph functions

 - Add more comments and documentation

 - Show function return address in function graph tracer

   Add an option to show the caller of a function at each entry of the
   function graph tracer, similar to what the function tracer does.

 - Abstract out ftrace_regs from being used directly like pt_regs

   ftrace_regs was created to store a partial pt_regs. It holds only the
   registers and stack information to get to the function arguments and
   return values. On several archs, it is simply a wrapper around
   pt_regs. But some users would access ftrace_regs directly to get the
   pt_regs which will not work on all archs. Make ftrace_regs an
   abstract structure that requires all access to its fields be through
   accessor functions.

 - Show how long it takes to do function code modifications

   When code modification for function hooks happen, it always had the
   time recorded in how long it took to do the conversion. But this
   value was never exported. Recently the code was touched due to new
   ROX modification handling that caused a large slow down in doing the
   modifications and had a significant impact on boot times.

   Expose the timings in the dyn_ftrace_total_info file. This file was
   created a while ago to show information about memory usage and such
   to implement dynamic function tracing. It's also an appropriate file
   to store the timings of this modification as well. This will make it
   easier to see the impact of changes to code modification on boot up
   timings.

 - Other clean ups and small fixes

* tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
  ftrace: Show timings of how long nop patching took
  ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash()
  ftrace: Use guard to take the ftrace_lock in release_probe()
  ftrace: Use guard to lock ftrace_lock in cache_mod()
  ftrace: Use guard for match_records()
  fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph()
  fgraph: Give ret_stack its own kmem cache
  fgraph: Separate size of ret_stack from PAGE_SIZE
  ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value
  selftests/ftrace: Fix check of return value in fgraph-retval.tc test
  ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros
  ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs
  ftrace: Make ftrace_regs abstract from direct use
  fgragh: No need to invoke the function call_filter_check_discard()
  fgraph: Simplify return address printing in function graph tracer
  function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr()
  function_graph: Support recording and printing the function return address
  ftrace: Have calltime be saved in the fgraph storage
  ftrace: Use a running sleeptime instead of saving on shadow stack
  fgraph: Use fgraph data to store subtime for profiler
  ...
2024-11-20 11:34:10 -08:00
Linus Torvalds
0352387523 First step of consolidating the VDSO data page handling:
The VDSO data page handling is architecture specific for historical
   reasons, but there is no real technical reason to do so.
 
   Aside of that VDSO data has become a dump ground for various mechanisms
   and fail to provide a clear separation of the functionalities.
 
   Clean this up by:
 
     * consolidating the VDSO page data by getting rid of architecture
       specific warts especially in x86 and PowerPC.
 
     * removing the last includes of header files which are pulling in other
       headers outside of the VDSO namespace.
 
     * seperating timekeeping and other VDSO data accordingly.
 
   Further consolidation of the VDSO page handling is done in subsequent
   changes scheduled for the next merge window.
 
   This also lays the ground for expanding the VDSO time getters for
   independent PTP clocks in a generic way without making every architecture
   add support seperately.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kyoTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoVBjD/9awdN2YeCGIM9rlHIktUdNRmRSL2SL
 6av1CPffN5DenONYTXWrDYPkC4yfjUwIs8H57uzFo10yA7RQ/Qfq+O68k5GnuFew
 jvpmmYSZ6TT21AmAaCIhn+kdl9YbEJFvN2AWH85Bl29k9FGB04VzJlQMMjfEZ1a5
 Mhwv+cfYNuPSZmU570jcxW2XgbyTWlLZBByXX/Tuz9bwpmtszba507bvo45x6gIP
 twaWNzrsyJpdXfMrfUnRiChN8jHlDN7I6fgQvpsoRH5FOiVwIFo0Ip2rKbk+ONfD
 W/rcU5oeqRIxRVDHzf2Sv8WPHMCLRv01ZHBcbJOtgvZC3YiKgKYoeEKabu9ZL1BH
 6VmrxjYOBBFQHOYAKPqBuS7BgH5PmtMbDdSZXDfRaAKaCzhCRysdlWW7z48r2R//
 zPufb7J6Tle23AkuZWhFjvlGgSBl4zxnTFn31HYOyQps3TMI4y50Z2DhE/EeU8a6
 DRl8/k1KQVDUZ6udJogS5kOr1J8pFtUPrA2uhR8UyLdx7YKiCzcdO1qWAjtXlVe8
 oNpzinU+H9bQqGe9IyS7kCG9xNaCRZNkln5Q1WfnkTzg5f6ihfaCvIku3l4bgVpw
 3HmcxYiC6RxQB+ozwN7hzCCKT4L9aMhr/457TNOqRkj2Elw3nvJ02L4aI86XAKLE
 jwO9Fkp9qcCxCw==
 =q5eD
 -----END PGP SIGNATURE-----

Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull vdso data page handling updates from Thomas Gleixner:
 "First steps of consolidating the VDSO data page handling.

  The VDSO data page handling is architecture specific for historical
  reasons, but there is no real technical reason to do so.

  Aside of that VDSO data has become a dump ground for various
  mechanisms and fail to provide a clear separation of the
  functionalities.

  Clean this up by:

   - consolidating the VDSO page data by getting rid of architecture
     specific warts especially in x86 and PowerPC.

   - removing the last includes of header files which are pulling in
     other headers outside of the VDSO namespace.

   - seperating timekeeping and other VDSO data accordingly.

  Further consolidation of the VDSO page handling is done in subsequent
  changes scheduled for the next merge window.

  This also lays the ground for expanding the VDSO time getters for
  independent PTP clocks in a generic way without making every
  architecture add support seperately"

* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/vdso: Add missing brackets in switch case
  vdso: Rename struct arch_vdso_data to arch_vdso_time_data
  powerpc: Split systemcfg struct definitions out from vdso
  powerpc: Split systemcfg data out of vdso data page
  powerpc: Add kconfig option for the systemcfg page
  powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
  powerpc/pseries/lparcfg: Fix printing of system_active_processors
  powerpc/procfs: Propagate error of remap_pfn_range()
  powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
  x86/vdso: Split virtual clock pages into dedicated mapping
  x86/vdso: Delete vvar.h
  x86/vdso: Access vdso data without vvar.h
  x86/vdso: Move the rng offset to vsyscall.h
  x86/vdso: Access rng vdso data without vvar.h
  x86/vdso: Access timens vdso data without vvar.h
  x86/vdso: Allocate vvar page from C code
  x86/vdso: Access rng data from kernel without vvar
  x86/vdso: Place vdso_data at beginning of vvar page
  x86/vdso: Use __arch_get_vdso_data() to access vdso data
  x86/mm/mmap: Remove arch_vma_name()
  ...
2024-11-19 16:09:13 -08:00
Linus Torvalds
f41dac3efb Performance events changes for v6.13:
- Uprobes:
     - Add BPF session support (Jiri Olsa)
     - Switch to RCU Tasks Trace flavor for better performance (Andrii Nakryiko)
     - Massively increase uretprobe SMP scalability by SRCU-protecting
       the uretprobe lifetime (Andrii Nakryiko)
     - Kill xol_area->slot_count (Oleg Nesterov)
 
  - Core facilities:
     - Implement targeted high-frequency profiling by adding the ability
       for an event to "pause" or "resume" AUX area tracing (Adrian Hunter)
 
  - VM profiling/sampling:
     - Correct perf sampling with guest VMs (Colton Lewis)
 
  - New hardware support:
     - x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
 
  - Misc fixes and enhancements:
     - x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
     - x86/amd: Warn only on new bits set (Breno Leitao)
     - x86/amd/uncore: Avoid a false positive warning about snprintf
                       truncation in amd_uncore_umc_ctx_init (Jean Delvare)
     - uprobes: Re-order struct uprobe_task to save some space (Christophe JAILLET)
     - x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
     - x86/rapl: Clean up cpumask and hotplug (Kan Liang)
     - uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg Nesterov)
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7eKERHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1i57A/+KQ6TrIoICVTE+BPlDfUw8NU+N3DagVb0
 dzoyDxlDRsnsYzeXZipPn+3IitX1w+DrGxBNIojSoiFVCLnHIKgo4uHbj7cVrR7J
 fBTVSnoJ94SGAk5ySebvLwMLce/YhXBeHK2lx6W/pI6acNcxzDfIabjjETeqltUo
 g7hmT9lo10pzZEZyuUfYX9khlWBxda1dKHc9pMIq7baeLe4iz/fCGlJ0K4d4M4z3
 NPZw239Np6iHUwu3Lcs4gNKe4rcDe7Bt47hpedemHe0Y+7c4s2HaPxbXWxvDtE76
 mlsg93i28f8SYxeV83pREn0EOCptXcljhiek+US+GR7NSbltMnV+uUiDfPKIE9+Y
 vYP/DYF9hx73FsOucEFrHxYYcePorn3pne5/khBYWdQU6TnlrBYWpoLQsjgCKTTR
 4JhCFlBZ5cDpc6ihtpwCwVTQ4Q/H7vM1XOlDwx0hPhcIPPHDreaQD/wxo61jBdXf
 PY0EPAxh3BcQxfPYuDS+XiYjQ8qO8MtXMKz5bZyHBZlbHwccV6T4ExjsLKxFk5As
 6BG8pkBWLg7drXAgVdleIY0ux+34w/Zzv7gemdlQxvWLlZrVvpjiG93oU3PTpZeq
 A2UD9eAOuXVD6+HsF/dmn88sFmcLWbrMskFWujkvhEUmCvSGAnz3YSS/mLEawBiT
 2xI8xykNWSY=
 =ItOT
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull performance events updates from Ingo Molnar:
 "Uprobes:
    - Add BPF session support (Jiri Olsa)
    - Switch to RCU Tasks Trace flavor for better performance (Andrii
      Nakryiko)
    - Massively increase uretprobe SMP scalability by SRCU-protecting
      the uretprobe lifetime (Andrii Nakryiko)
    - Kill xol_area->slot_count (Oleg Nesterov)

  Core facilities:
    - Implement targeted high-frequency profiling by adding the ability
      for an event to "pause" or "resume" AUX area tracing (Adrian
      Hunter)

  VM profiling/sampling:
    - Correct perf sampling with guest VMs (Colton Lewis)

  New hardware support:
    - x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)

  Misc fixes and enhancements:
    - x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
    - x86/amd: Warn only on new bits set (Breno Leitao)
    - x86/amd/uncore: Avoid a false positive warning about snprintf
      truncation in amd_uncore_umc_ctx_init (Jean Delvare)
    - uprobes: Re-order struct uprobe_task to save some space
      (Christophe JAILLET)
    - x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
    - x86/rapl: Clean up cpumask and hotplug (Kan Liang)
    - uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
      Nesterov)"

* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  perf/core: Correct perf sampling with guest VMs
  perf/x86: Refactor misc flag assignments
  perf/powerpc: Use perf_arch_instruction_pointer()
  perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
  perf/arm: Drop unused functions
  uprobes: Re-order struct uprobe_task to save some space
  perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
  perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
  perf/x86/intel/pt: Add support for pause / resume
  perf/core: Add aux_pause, aux_resume, aux_start_paused
  perf/x86/intel/pt: Fix buffer full but size is 0 case
  uprobes: SRCU-protect uretprobe lifetime (with timeout)
  uprobes: allow put_uprobe() from non-sleepable softirq context
  perf/x86/rapl: Clean up cpumask and hotplug
  perf/x86/rapl: Move the pmu allocation out of CPU hotplug
  uprobe: Add support for session consumer
  uprobe: Add data pointer to consumer handlers
  perf/x86/amd: Warn only on new bits set
  uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
  uprobes: kill xol_area->slot_count
  ...
2024-11-19 13:34:06 -08:00
Linus Torvalds
ba1f9c8fe3 arm64 updates for 6.13:
* Support for running Linux in a protected VM under the Arm Confidential
   Compute Architecture (CCA)
 
 * Guarded Control Stack user-space support. Current patches follow the
   x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
   patches (already on the list) will add support for clone3() allowing
   finer-grained control of the shadow stack size and placement from libc
 
 * AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
   getting close with the upcoming dpISA support)
 
 * Other arch features:
 
   - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only
     exposed to user; uaccess support not merged yet)
 
   - MTE: hugetlbfs support and the corresponding kselftests
 
   - Optimise CRC32 using the PMULL instructions
 
   - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
 
   - Optimise the kernel TLB flushing to use the range operations
 
   - POE/pkey (permission overlays): further cleanups after bringing the
     signal handler in line with the x86 behaviour for 6.12
 
 * arm64 perf updates:
 
   - Support for the NXP i.MX91 PMU in the existing IMX driver
 
   - Support for Ampere SoCs in the Designware PCIe PMU driver
 
   - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
 
   - Support for Samsung's 'Mongoose' CPU PMU
 
   - Support for PMUv3.9 finer-grained userspace counter access control
 
   - Switch back to platform_driver::remove() now that it returns 'void'
 
   - Add some missing events for the CXL PMU driver
 
 * Miscellaneous arm64 fixes/cleanups:
 
   - Page table accessors cleanup: type updates, drop unused macros,
     reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
     check addresses before runtime P4D/PUD folding
 
   - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
     FEAT_ECV for the generic timers) allowing Linux to boot with
     firmware deployments that don't set SCTLR_EL3.ECVEn
 
   - ACPI/arm64: tighten the check for the array of platform timer
     structures and adjust the error handling procedure in
     gtdt_parse_timer_block()
 
   - Optimise the cache flush for the uprobes xol slot (skip if no
     change) and other uprobes/kprobes cleanups
 
   - Fix the context switching of tpidrro_el0 when kpti is enabled
 
   - Dynamic shadow call stack fixes
 
   - Sysreg updates
 
   - Various arm64 kselftest improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmc5POIACgkQa9axLQDI
 XvEDYA//a3eeNkgMuGdnSCVcLz+zy+oNwAwboG/4X1DqL8jiCbI4npwugPx95RIA
 YZOUvo9T2aL3OyefpUHll4gFHqx9OwoZIig2F70TEUmlPsGUbh0KBkdfQF3xZPdl
 EwV0kHSGEqMWMBwsGJGwgCYrUaf1MUQzh1GBl7VJ2ts5XsJBaBeOyKkysij26wtZ
 V+aHq2IUx7qQS7+HC/4P6IoHxKziFcsCMovaKaynP4cw9xXBQbDMcNlHEwndOMyk
 pu2zrv7GG0j3KQuVP/2Alf5FKhmI0GVGP/6Nc/zsOmw96w8Kf7HfzEtkHawr2aRq
 rqg/c9ivzDn1p+fUBo4ZYtrRk4IAY+yKu6hdzdLTP5+bQrBTWTO9rjQVBm9FAGYT
 sCdEj1NqzvExvNHD7X6ut/GJ05lmce3K+qeSXSEysN9gqiT3eomYWMXrD2V2lxzb
 rIDDcb/icfaqjt14Mksh19r/rzNeq7noj9CGSmcqw0BHZfHzl38Lai6pdfYzCNyn
 vCM/c4c1D/WWX8/lifO1JZVbhDk1jy82Iphg2KEhL8iKPxDsKBBZLmYuU1oa7tMo
 WryGAz9+GQwd+W9chFuaOEtMnzvW2scEJ5Eb2fEf0Qj0aEurkL+C9dZR6o1GN77V
 DBUxtU628Ef4PJJGfbNCwZzdd8UPYG3a/mKfQQ3dz0oz2LySlW4=
 =wDot
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Support for running Linux in a protected VM under the Arm
   Confidential Compute Architecture (CCA)

 - Guarded Control Stack user-space support. Current patches follow the
   x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
   patches (already on the list) will add support for clone3() allowing
   finer-grained control of the shadow stack size and placement from
   libc

 - AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
   getting close with the upcoming dpISA support)

 - Other arch features:

     - In-kernel use of the memcpy instructions, FEAT_MOPS (previously
       only exposed to user; uaccess support not merged yet)

     - MTE: hugetlbfs support and the corresponding kselftests

     - Optimise CRC32 using the PMULL instructions

     - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG

     - Optimise the kernel TLB flushing to use the range operations

     - POE/pkey (permission overlays): further cleanups after bringing
       the signal handler in line with the x86 behaviour for 6.12

 - arm64 perf updates:

     - Support for the NXP i.MX91 PMU in the existing IMX driver

     - Support for Ampere SoCs in the Designware PCIe PMU driver

     - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC

     - Support for Samsung's 'Mongoose' CPU PMU

     - Support for PMUv3.9 finer-grained userspace counter access
       control

     - Switch back to platform_driver::remove() now that it returns
       'void'

     - Add some missing events for the CXL PMU driver

 - Miscellaneous arm64 fixes/cleanups:

     - Page table accessors cleanup: type updates, drop unused macros,
       reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
       check addresses before runtime P4D/PUD folding

     - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
       FEAT_ECV for the generic timers) allowing Linux to boot with
       firmware deployments that don't set SCTLR_EL3.ECVEn

     - ACPI/arm64: tighten the check for the array of platform timer
       structures and adjust the error handling procedure in
       gtdt_parse_timer_block()

     - Optimise the cache flush for the uprobes xol slot (skip if no
       change) and other uprobes/kprobes cleanups

     - Fix the context switching of tpidrro_el0 when kpti is enabled

     - Dynamic shadow call stack fixes

     - Sysreg updates

     - Various arm64 kselftest improvements

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
  arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
  kselftest/arm64: Try harder to generate different keys during PAC tests
  kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
  arm64/ptrace: Clarify documentation of VL configuration via ptrace
  kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
  acpi/arm64: remove unnecessary cast
  arm64/mm: Change protval as 'pteval_t' in map_range()
  kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
  kselftest/arm64: Add FPMR coverage to fp-ptrace
  kselftest/arm64: Expand the set of ZA writes fp-ptrace does
  kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
  kselftest/arm64: Enable build of PAC tests with LLVM=1
  kselftest/arm64: Check that SVCR is 0 in signal handlers
  selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
  kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
  kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
  kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
  kselftest/arm64: Fix build with stricter assemblers
  arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
  arm64/scs: Deal with 64-bit relative offsets in FDE frames
  ...
2024-11-18 18:10:37 -08:00