The instance of the GPU populated in i.MX95 is the G310, describe this
GPU in the DT. Include dummy GPU voltage regulator and OPP tables.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20251102160927.45157-2-marek.vasut@mailbox.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The display subsystem represent how IPs are interacting together and
have nothing to do within the SoC node.
Extract it from the SoC node and let IPs nodes in the Soc node.
Several nodes did not use conventional name:
* sti-display-subsystem -> display-subsystem
* sti-controller -> display-controller
* sti-tvout -> encoder
* sti-hda -> analog
* sti-hqvdp -> plane
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20250717-sti-rework-v1-3-46d516fb1ebb@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously not
flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range of
a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of monitoring
groups created exceeds the number the hardware can track
-----BEGIN PGP SIGNATURE-----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=WMx2
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Reset the why-the-system-rebooted register on AMD to avoid stale bits
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously
not flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range
of a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of
monitoring groups created exceeds the number the hardware can track
* tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Prevent reset reasons from being retained across reboot
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
x86/mm: Fix overflow in __cpa_addr()
x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on
the back of a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2 timer
access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host
with FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmjzqVIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO+qQgArc7XXmoiHQfTmdqbFL+1ipzfqd/c
SHJghONWVNKaSm0EsH72iEokmUyI8HssllaBuaGEAT/1F6YmRFwSSFgUG+N02rah
pL5ShCG2fPVxHal9ZJ04M4DYWPPClmcE2myfQ6k9kwcMgCRK2BdSRRnKH3XfOKrY
jAFNZVBCeODcnSvjOyxK2QFEt7J97H1AoAxOORvdqFmRqVIEQNJA/3Hx51wPfkwD
UnCQiNaPinDMxuuwvcmlYsIrQhGaqO4de1Kx0A4ZkSQqFUcyhvB6Qa+DoApz/IBw
qsFLqoR/1XXJ90wxutSTFzfjHM/SU6fhj57Cl9dAHI3pgnssC1iUvEt9Iw==
=dvAj
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
- Fix to handle NULL pointer dereference at irq domain teardown
- Fix for handling extraction of struct xive_irq_data
- Fix to skip parameter area allocation when fadump disabled
Thanks to: Ganesh Goudar, Hari Bathini, Nam Cao, Ritesh Harjani (IBM) Sourabh Jain, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmjzbw8ACgkQpnEsdPSH
ZJQRQQ//S+NgNrn7KloQ28W+zLauH1GZKTkAwR3D8M1wFWwkM4guyxhHVCagxO6d
dL1Hs4dUzoCfum6qw2/E0Jc/4ul7YLv3QeiTyz6UwytrZOHeUy7WvPUtksb22+Hk
FSdUP/hD2td8SP1V4vsJVuK58DieiwNMpXvPssnq9wmCJoepKNdc3TTFSIRWji92
PfL9ooYwoT5flW7nvf7Tx0ZbfL1pEIbTjEufsQOINofTadZnOfSvJoq0zYf5VFFF
8v1YDOqWfBvWJWR0eLLdS8S0tWLIf6e8h6cQkWIninvsVU1LtWhcbGiq1xD3BTFl
RYCTkUzNjFAf0lvkjfheXylqKZhoDglfGsHQhADCL0cCtSbRCUYkz24+n7m7se3Y
0hj1Xs3hi4ELH/i5m6VZqL3sEsXnOLOfA8fD9mhDCy+33RK5jMNdNhTjTLsSmW1T
m0E7gF6Yt16BTggWuQJREXtEVCQbQOxhDZwuG4tw3bAU3VAuyUbkVggS9Fadb81Q
klTGTAY8s3BxTzjVzeQByhOCtpyRgkKX3UEYH2CwGHi5NbpcSKlQx7q7JuxenkP4
aOY9A1oCc4H/vjM2hUOtdu9wUO4hxMrGwv8Nk0dJFFGOJLS/ArdXTvcayrX2J8I9
Rnkd+ztef8n7lkVjjl82WrRD/gIDMFXZQvsos0nHTS+pRdMX2mk=
=YUzr
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle NULL pointer dereference at irq domain teardown
- Fix for handling extraction of struct xive_irq_data
- Fix to skip parameter area allocation when fadump disabled
Thanks to Ganesh Goudar, Hari Bathini, Nam Cao, Ritesh Harjani (IBM),
Sourabh Jain, and Venkat Rao Bagalkote,
* tag 'powerpc-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/fadump: skip parameter area allocation when fadump is disabled
powerpc, ocxl: Fix extraction of struct xive_irq_data
powerpc/pseries/msi: Fix NULL pointer dereference at irq domain teardown
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
-----BEGIN PGP SIGNATURE-----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=lBtj
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.18-rc2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0. The GIC CDEOI instruction is encoded as a
system register write with XZR as the source register. However, clang
does not honour the "Z" register constraint, leading to incorrect
code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode(). With pseudo-NMIs, interrupts are (additionally)
masked at the PMR_EL1 register, handled by local_irq_*()
-----BEGIN PGP SIGNATURE-----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=Dn7A
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0.
The GIC CDEOI instruction is encoded as a system register write with
XZR as the source register. However, clang does not honour the "Z"
register constraint, leading to incorrect code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode().
With pseudo-NMIs, interrupts are (additionally) masked at the PMR_EL1
register, handled by local_irq_*()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: debug: always unmask interrupts in el0_softstp()
arm64/sysreg: Fix GIC CDEOI instruction encoding
Some RISC-V fixes for v6.18-rc2, including changes to:
- Disable CFI with Rust for any platform other than x86 and ARM64
- Keep task mm_cpumasks up-to-date to avoid triggering M-mode firmware
warnings if the kernel tries to send an IPI to an offline CPU
- Improve kprobe address validation performance and avoid desyncs
(following x86)
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for CONFIG_ARCH_HAS_ELF_CORE_EFLAGS,
avoiding an allnoconfig warning
- Fix a few other minor issues
-----BEGIN PGP SIGNATURE-----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=ZOFG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Disable CFI with Rust for any platform other than x86 and ARM64
- Keep task mm_cpumasks up-to-date to avoid triggering M-mode firmware
warnings if the kernel tries to send an IPI to an offline CPU
- Improve kprobe address validation performance and avoid desyncs
(following x86)
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for
CONFIG_ARCH_HAS_ELF_CORE_EFLAGS, avoiding an allnoconfig warning
- Fix a few other minor issues
* tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kprobes: convert one final __ASSEMBLY__ to __ASSEMBLER__
riscv: Respect dependencies of ARCH_HAS_ELF_CORE_EFLAGS
riscv: acpi: avoid errors caused by probing DT devices when ACPI is used
riscv: kprobes: Fix probe address validation
riscv: entry: fix typo in comment 'instruciton' -> 'instruction'
RISC-V: clear hot-unplugged cores from all task mm_cpumasks to avoid rfence errors
riscv: kgdb: Ensure that BUFMAX > NUMREGBYTES
rust: cfi: only 64-bit arm and x86 support CFI_CLANG
We intend that EL0 exception handlers unmask all DAIF exceptions
before calling exit_to_user_mode().
When completing single-step of a suspended breakpoint, we do not call
local_daif_restore(DAIF_PROCCTX) before calling exit_to_user_mode(),
leaving all DAIF exceptions masked.
When pseudo-NMIs are not in use this is benign.
When pseudo-NMIs are in use, this is unsound. At this point interrupts
are masked by both DAIF.IF and PMR_EL1, and subsequent irq flag
manipulation may not work correctly. For example, a subsequent
local_irq_enable() within exit_to_user_mode_loop() will only unmask
interrupts via PMR_EL1 (leaving those masked via DAIF.IF), and
anything depending on interrupts being unmasked (e.g. delivery of
signals) will not work correctly.
This was detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING.
Move the call to `try_step_suspended_breakpoints()` outside of the check
so that interrupts can be unmasked even if we don't call the step handler.
Fixes: 0ac7584c08 ("arm64: debug: split single stepping exception entry")
Cc: <stable@vger.kernel.org> # 6.17
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: added Mark's rewritten commit log and some whitespace]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The GIC CDEOI system instruction requires the Rt field to be set to 0b11111
otherwise the instruction behaviour becomes CONSTRAINED UNPREDICTABLE.
Currenly, its usage is encoded as a system register write, with a constant
0 value:
write_sysreg_s(0, GICV5_OP_GIC_CDEOI)
While compiling with GCC, the 0 constant value, through these asm
constraints and modifiers ('x' modifier and 'Z' constraint combo):
asm volatile(__msr_s(r, "%x0") : : "rZ" (__val));
forces the compiler to issue the XZR register for the MSR operation (ie
that corresponds to Rt == 0b11111) issuing the right instruction encoding.
Unfortunately LLVM does not yet understand that modifier/constraint
combo so it ends up issuing a different register from XZR for the MSR
source, which in turns means that it encodes the GIC CDEOI instruction
wrongly and the instruction behaviour becomes CONSTRAINED UNPREDICTABLE
that we must prevent.
Add a conditional to write_sysreg_s() macro that detects whether it
is passed a constant 0 value and issues an MSR write with XZR as source
register - explicitly doing what the asm modifier/constraint is meant to
achieve through constraints/modifiers, fixing the LLVM compilation issue.
Fixes: 7ec80fb3f0 ("irqchip/gic-v5: Add GICv5 PPI support")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Sascha Bischoff <sascha.bischoff@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The S5_RESET_STATUS register is parsed on boot and printed to kmsg.
However, this could sometimes be misleading and lead to users wasting a
lot of time on meaningless debugging for two reasons:
* Some bits are never cleared by hardware. It's the software's
responsibility to clear them as per the Processor Programming Reference
(see [1]).
* Some rare hardware-initiated platform resets do not update the
register at all.
In both cases, a previous reboot could leave its trace in the register,
resulting in users seeing unrelated reboot reasons while debugging random
reboots afterward.
Write the read value back to the register in order to clear all reason bits
since they are write-1-to-clear while the others must be preserved.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206537#attach_303991
[ bp: Massage commit message. ]
Fixes: ab81310287 ("x86/CPU/AMD: Print the reason for the last reset")
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/all/20250913144245.23237-1-i@rong.moe/
Inspired by commit c065b6046b ("Use CONFIG_EXT4_FS instead of
CONFIG_EXT3_FS in all of the defconfigs") I looked around for any other
left-over EXT3 config options, and found some old defconfig files still
mentioned CONFIG_EXT3_DEFAULTS_TO_ORDERED.
That config option was removed a decade ago in commit c290ea01ab ("fs:
Remove ext3 filesystem driver"). It had a good run, but let's remove it
for good.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
* Avoid a BUG_ON when opening a file on a maliciously corrupted file system
* Avoid mm warnings when freeing a very large orphan file metadata
* Avoid a theoretical races between metadata wrtteback and checkpoints.
(It's very hard to hit in practice, since the race requires that the
writeback take a very long time.)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmjvEgUACgkQ8vlZVpUN
gaPLXgf/UzjSmhiLSrvZ6IajGcCvwWI/j7aKL5sIbyz3Wqulz5SuMoZg3Vbi58sp
LJ6H0Ng8E7BCJa0EVf5YN24SAbfR+M4XSsIohjqo7OAXqin4SYSp6TjW9ex7dJmY
uUOHuNQ+r2MTGN2gi9bwgLEGZX5Yhn2jK01KCYb+mr/EMnmQ3iVilYViUd2xdeNv
xQY3+befzoaEtLe58qciPC1tZHFpIJvIj2g0mif3MO4t2zy5viQrn+v1l/CBRvL+
0ZqvAWa9q4GbLWqn62H/2YnIjHm/o437u7m9hExnG3Qhv7X3zhh0LGAZDmHxEO9n
zoNIJuYDhPb+8GfQXmDv/DkKFVXQNg==
=vCC5
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
We currently have two ways to identify CPUs that only implement FEAT_VHE
and not FEAT_E2H0:
- either they advertise it via ID_AA64MMFR4_EL1.E2H0,
- or the HCR_EL2.E2H bit is RAO/WI
However, there is a third category of "cpus" that fall between these
two cases: on CPUs that do not implement FEAT_FGT, it is IMPDEF whether
an access to ID_AA64MMFR4_EL1 can trap to EL2 when the register value
is zero.
A consequence of this is that on systems such as Neoverse V2, a NV
guest cannot reliably detect that it is in a VHE-only configuration
(E2H is writable, and ID_AA64MMFR0_EL1 is 0), despite the hypervisor's
best effort to repaint the id register.
Replace the RAO/WI test by a sequence that makes use of the VHE
register remnapping between EL1 and EL2 to detect this situation,
and work out whether we get the VHE behaviour even after having
set HCR_EL2.E2H to 0.
This solves the NV problem, and provides a more reliable acid test
for CPUs that do not completely follow the letter of the architecture
while providing a RES1 behaviour for HCR_EL2.E2H.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/15A85F2B-1A0C-4FA7-9FE4-EEC2203CC09E@global.cadence.com
Commit d6ace46c82 ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82 ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stephen noted that it is possible to not have an smp_mb() between
the loaded_mm store and the tlb_gen load in switch_mm(), meaning the
ordering against flush_tlb_mm_range() goes out the window, and it
becomes possible for switch_mm() to not observe a recent tlb_gen
update and fail to flush the TLBs.
[ dhansen: merge conflict fixed by Ingo ]
Fixes: 209954cbc7 ("x86/mm/tlb: Update mm_cpumask lazily")
Reported-by: Stephen Dolan <sdolan@janestreet.com>
Closes: https://lore.kernel.org/all/CAHDw0oGd0B4=uuv8NGqbUQ_ZVmSheU2bN70e4QhFXWvuAZdt2w@mail.gmail.com/
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
The change to have cpa_flush() call flush_kernel_pages() introduced
a bug where __cpa_addr() can access an address one larger than the
largest one in the cpa->pages array.
KASAN reports the issue like this:
BUG: KASAN: slab-out-of-bounds in __cpa_addr arch/x86/mm/pat/set_memory.c:309 [inline]
BUG: KASAN: slab-out-of-bounds in __cpa_addr+0x1d3/0x220 arch/x86/mm/pat/set_memory.c:306
Read of size 8 at addr ffff88801f75e8f8 by task syz.0.17/5978
This bug could cause cpa_flush() to not properly flush memory,
which somehow never showed any symptoms in my tests, possibly
because cpa_flush() is called so rarely, but could potentially
cause issues for other people.
Fix the issue by directly calculating the flush end address
from the start address.
Fixes: 86e6815b31 ("x86/mm: Change cpa_flush() to call flush_kernel_range() directly")
Reported-by: syzbot+afec6555eef563c66c97@syzkaller.appspotmail.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Link: https://lore.kernel.org/all/68e2ff90.050a0220.2c17c1.0038.GAE@google.com/
Users can create as many monitoring groups as the number of RMIDs supported
by the hardware. However, on AMD systems, only a limited number of RMIDs
are guaranteed to be actively tracked by the hardware. RMIDs that exceed
this limit are placed in an "Unavailable" state.
When a bandwidth counter is read for such an RMID, the hardware sets
MSR_IA32_QM_CTR.Unavailable (bit 62). When such an RMID starts being tracked
again the hardware counter is reset to zero. MSR_IA32_QM_CTR.Unavailable
remains set on first read after tracking re-starts and is clear on all
subsequent reads as long as the RMID is tracked.
resctrl miscounts the bandwidth events after an RMID transitions from the
"Unavailable" state back to being tracked. This happens because when the
hardware starts counting again after resetting the counter to zero, resctrl
in turn compares the new count against the counter value stored from the
previous time the RMID was tracked.
This results in resctrl computing an event value that is either undercounting
(when new counter is more than stored counter) or a mistaken overflow (when
new counter is less than stored counter).
Reset the stored value (arch_mbm_state::prev_msr) of MSR_IA32_QM_CTR to
zero whenever the RMID is in the "Unavailable" state to ensure accurate
counting after the RMID resets to zero when it starts to be tracked again.
Example scenario that results in mistaken overflow
==================================================
1. The resctrl filesystem is mounted, and a task is assigned to a
monitoring group.
$mount -t resctrl resctrl /sys/fs/resctrl
$mkdir /sys/fs/resctrl/mon_groups/test1/
$echo 1234 > /sys/fs/resctrl/mon_groups/test1/tasks
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
21323 <- Total bytes on domain 0
"Unavailable" <- Total bytes on domain 1
Task is running on domain 0. Counter on domain 1 is "Unavailable".
2. The task runs on domain 0 for a while and then moves to domain 1. The
counter starts incrementing on domain 1.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
7345357 <- Total bytes on domain 0
4545 <- Total bytes on domain 1
3. At some point, the RMID in domain 0 transitions to the "Unavailable"
state because the task is no longer executing in that domain.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
"Unavailable" <- Total bytes on domain 0
434341 <- Total bytes on domain 1
4. Since the task continues to migrate between domains, it may eventually
return to domain 0.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
17592178699059 <- Overflow on domain 0
3232332 <- Total bytes on domain 1
In this case, the RMID on domain 0 transitions from "Unavailable" state to
active state. The hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62) when
the counter is read and begins tracking the RMID counting from 0.
Subsequent reads succeed but return a value smaller than the previously
saved MSR value (7345357). Consequently, the resctrl's overflow logic is
triggered, it compares the previous value (7345357) with the new, smaller
value and incorrectly interprets this as a counter overflow, adding a large
delta.
In reality, this is a false positive: the counter did not overflow but was
simply reset when the RMID transitioned from "Unavailable" back to active
state.
Here is the text from APM [1] available from [2].
"In PQOS Version 2.0 or higher, the MBM hardware will set the U bit on the
first QM_CTR read when it begins tracking an RMID that it was not
previously tracking. The U bit will be zero for all subsequent reads from
that RMID while it is still tracked by the hardware. Therefore, a QM_CTR
read with the U bit set when that RMID is in use by a processor can be
considered 0 when calculating the difference with a subsequent read."
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3 Monitoring L3 Memory
Bandwidth (MBM).
[ bp: Split commit message into smaller paragraph chunks for better
consumption. ]
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org # needs adjustments for <= v6.17
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
Marc reports that the performance of running an L3 guest has regressed
by 60% as a result of setting MDCR_EL2.TDA to hide bad architecture.
That's of course terrible for the single user of recursive NV ;-)
While there's nothing to be done on non-FGT systems, take advantage of
the precise write trap of MDSCR_EL1 and leave the rest of the debug
registers untrapped.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
To date KVM has used the fine-grained traps for the sake of UNDEF
enforcement (so-called FGUs), meaning the constituent parts could be
computed on a per-VM basis and folded into the effective value when
programmed.
Prepare for traps changing based on the vCPU context by computing the
whole mess of them at vcpu_load(). Aggressively inline all the helpers
to preserve the build-time checks that were there before.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the whole timer infrastructure is handled as system register
accesses, get rid of the now unused ad-hoc infrastructure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The spec for WFxT indicates that the parameter to the WFxT instruction
is relative to the reading of CNTVCT_EL0. This means that the implementation
needs to take the execution context into account, as CNTVOFF_EL2
does not always affect readings of CNTVCT_EL0 (such as when HCR_EL2.E2H
is 1 and that we're in host context).
This also rids us of the last instance of KVM_REG_ARM_TIMER_CNT
outside of the userspace interaction code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Moving the counter registers is a bit more involved than for the control
and comparator (there is no shadow data for the counter), but still
pretty manageable.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Remove the handling of CNT*_CTL_EL0 from guest.c, and move it to
sys_regs.c, using a new TIMER_REG() definition to encapsulate it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Amongst the numerous bugs that plague the KVM/arm64 UAPI, one of
the most annoying thing is that the userspace view of the virtual
timer has its CVAL and CNT encodings swapped.
In order to reduce the amount of code that has to know about this,
start by adding handling for this bug in the sys_reg code.
Nothing is making use of it yet, as the code responsible for userspace
interaction is catching the accesses early.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Move the timer_set_offset() helper to arm_arch_timer.h, so that it
is next to timer_get_offset(), and accessible by the rest of KVM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Having to follow a pointer to a vcpu is pretty dumb, when the timers
are are a fixed offset in the vcpu structure itself.
Trade the vcpu pointer for a timer_id, which can then be used to
compute the vcpu address as needed.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently have a vcpu pointer nested into each timer context.
As we are about to remove this pointer, introduce a helper (aptly
named timer_context_to_vcpu()) that returns this pointer, at least
until we repaint the data structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although we correctly UNDEF any CNTHV_*_EL2 access from the guest
when E2H==0, we still expose these registers to userspace, which
is a bad idea.
Drop the ad-hoc UNDEF injection and switch to a .visibility()
callback which will also hide the register from userspace.
Fixes: 0e45981028 ("KVM: arm64: timer: Don't adjust the EL2 virtual timer offset")
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ICH_HCR_EL2 traps are used when running on GICv3 hardware, or when
running a GICv3-based guest using FEAT_GCIE_LEGACY on GICv5
hardware. When running a GICv2 guest on GICv3 hardware the traps are
used to ensure that the guest never sees any part of GICv3 (only GICv2
is visible to the guest), and when running a GICv3 guest they are used
to trap in specific scenarios. They are not applicable for a
GICv2-native guest, and won't be applicable for a(n upcoming) GICv5
guest.
The traps themselves are configured in the vGIC CPU IF state, which is
stored as a union. Updating the wrong aperture of the union risks
corrupting state, and therefore needs to be avoided at all costs.
Bail early if we're not running a compatible guest (GICv2 on GICv3
hardware, GICv3 native, GICv3 on GICv5 hardware). Trap everything
unconditionally if we're running a GICv2 guest on GICv3
hardware. Otherwise, conditionally set up GICv3-native trapping.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit efad60e460 ("KVM: arm64: Initialize PMSCR_EL1 when in VHE")
does not perform sufficient check before initializing PMSCR_EL1 to 0
when running in VHE mode. On some platforms, this causes the system to
hang during boot, as EL3 has not delegated access to the Profiling
Buffer to the Non-secure world, nor does it reinject an UNDEF on sysreg
trap.
To avoid this issue, restrict the PMSCR_EL1 initialization to CPUs that
support Statistical Profiling Extension (FEAT_SPE) and have the
Profiling Buffer accessible in Non-secure EL1. This is determined via a
new helper `cpu_has_spe()` which checks both PMSVer and PMBIDR_EL1.P.
This ensures the initialization only affects CPUs where SPE is
implemented and usable, preventing boot failures on platforms where SPE
is not properly configured.
Fixes: efad60e460 ("KVM: arm64: Initialize PMSCR_EL1 when in VHE")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Remove an unnecessary 'break' statement that follows a 'return'
in arch/arm64/kvm/at.c. The break is unreachable.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)
Reject the ioctls outright as no sane VMM would call these before
KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been
thrown away by the eventual reset of the vCPU's state.
Cc: stable@vger.kernel.org # 6.17
Fixes: b7b27facc7 ("arm/arm64: KVM: Add KVM_GET/SET_VCPU_EVENTS")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Running the external_aborts selftest at EL2 leads to an ugly splat due
to the stage-1 MMU being disabled for the walked context, owing to the
fact that __kvm_find_s1_desc_level() is hardcoded to the EL1&0 regime.
Select the appropriate translation regime for the stage-1 walk based on
the current vCPU context.
Fixes: b8e625167a ("KVM: arm64: Add S1 IPA to page table level walker")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Jan reports that running a nested guest on Neoverse-V2 leads to a WARN
in the host due to simultaneously pending an exception and PC increment
after an access to ZCR_EL2.
Returning true from a sysreg accessor is an indication that the sysreg
instruction has been retired. Of course this isn't the case when we've
pended a synchronous SVE exception for the guest. Fix the return value
and let the exception propagate to the guest as usual.
Reported-by: Jan Kotas <jank@cadence.com>
Closes: https://lore.kernel.org/kvmarm/865xd61tt5.wl-maz@kernel.org/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Unlike the other mapped EL2 sysregs ZCR_EL2 isn't guaranteed to be
resident when a vCPU is loaded as it actually follows the SVE
context. As such, the contents of ZCR_EL1 may belong to another guest if
the vCPU has been preempted before reaching sysreg emulation.
Unconditionally use the in-memory value of ZCR_EL2 and switch to the
memory-only accessors. The in-memory value is guaranteed to be valid as
fpsimd_lazy_switch_to_{guest,host}() will restore/save the register
appropriately.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fadump allocates memory to pass additional kernel command-line argument
to the fadump kernel. However, this allocation is not needed when fadump
is disabled. So avoid allocating memory for the additional parameter
area in such cases.
Fixes: f4892c68ec ("powerpc/fadump: allocate memory for additional parameters early")
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Fixes: f4892c68ec ("powerpc/fadump: allocate memory for additional parameters early")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008032934.262683-1-sourabhjain@linux.ibm.com
Commit cc0cc23bab ("powerpc/xive: Untangle xive from child interrupt
controller drivers") changed xive_irq_data to be stashed to chip_data
instead of handler_data. However, multiple places are still attempting to
read xive_irq_data from handler_data and get a NULL pointer deference bug.
Update them to read xive_irq_data from chip_data.
Non-XIVE files which touch xive_irq_data seem quite strange to me,
especially the ocxl driver. I think there ought to be an alternative
platform-independent solution, instead of touching XIVE's data directly.
Therefore, I think this whole thing should be cleaned up. But perhaps I
just misunderstand something. In any case, this cleanup would not be
trivial; for now, just get things working again.
Fixes: cc0cc23bab ("powerpc/xive: Untangle xive from child interrupt controller drivers")
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/68e48df8.170a0220.4b4b0.217d@mx.google.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008081359.1382699-1-namcao@linutronix.de
pseries_msi_ops_teardown() reads pci_dev* from msi_alloc_info_t. However,
pseries_msi_ops_prepare() does not populate this structure, thus it is all
zeros. Consequently, pseries_msi_ops_teardown() triggers a NULL pointer
dereference crash.
struct pci_dev is available in struct irq_domain. Read it there instead.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/878d7651-433a-46fe-a28b-1b7e893fcbe0@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251010120307.3281720-1-namcao@linutronix.de
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaOqyGgAKCRAdayaRccAa
lhIaAP4owzRbZv/KnwVgXt3IDlAN7tOJQyiNbuAOTTH9IewvhAEA24zfrlav7CQl
WSc0d/poWAdmQJc0T/bdQ71G69j6dgQ=
=ljuS
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled kernels
in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
-----BEGIN PGP SIGNATURE-----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=3Otb
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support for
various instruction mnemonics now that the minimum assembler version
supports them all
- The usual cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=dW6J
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Allow mmap() on guest_memfd instances for x86 VMs with private memory as
the need to track private vs. shared state in the guest_memfd instance is
only pertinent to INIT_SHARED. Doing mmap() on private memory isn't
terrible useful (yet!), but it's now possible, and will be desirable when
guest_memfd gains support for other VMA-based syscalls, e.g. mbind() to
set NUMA policy.
Lift the restriction now, before MMAP support is officially released, so
that KVM doesn't need to add another capability to enumerate support for
mmap() on private memory.
Fixes: 3d3a04fad2 ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly zero kvm_host_pmu instead of attempting to get the perf PMU
capabilities when running on a hybrid CPU to avoid running afoul of perf's
sanity check.
------------[ cut here ]------------
WARNING: arch/x86/events/core.c:3089 at perf_get_x86_pmu_capability+0xd/0xc0,
Call Trace:
<TASK>
kvm_x86_vendor_init+0x1b0/0x1a40 [kvm]
vmx_init+0xdb/0x260 [kvm_intel]
vt_init+0x12/0x9d0 [kvm_intel]
do_one_initcall+0x60/0x3f0
do_init_module+0x97/0x2b0
load_module+0x2d08/0x2e30
init_module_from_file+0x96/0xe0
idempotent_init_module+0x117/0x330
__x64_sys_finit_module+0x73/0xe0
Always read the capabilities for non-hybrid CPUs, i.e. don't entirely
revert to reading capabilities if and only if KVM wants to use a PMU, as
it may be useful to have the host PMU capabilities available, e.g. if only
or debug.
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/70b64347-2aca-4511-af78-a767d5fa8226@intel.com/
Fixes: 51f34b1e65 ("KVM: x86/pmu: Snapshot host (i.e. perf's) reported PMU capabilities")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20251010005239.146953-1-dapeng1.mi@linux.intel.com
[sean: rework changelog, call out hybrid CPUs in shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
- minor cleanups
-----BEGIN PGP SIGNATURE-----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=ZBiX
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20251010' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- minor cleanups
* tag 'xtensa-20251010' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: use HZ_PER_MHZ in platform_calibrate_ccount
xtensa: simdisk: add input size check in proc_write_simdisk
When building s390 defconfig with binutils older than 2.32, there are
several warnings during the final linking stage:
s390-linux-ld: .tmp_vmlinux1: warning: allocated section `.got.plt' not in segment
s390-linux-ld: .tmp_vmlinux2: warning: allocated section `.got.plt' not in segment
s390-linux-ld: vmlinux.unstripped: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: vmlinux: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: st7afZyb: warning: allocated section `.got.plt' not in segment
binutils commit afca762f598 ("S/390: Improve partial relro support for
64 bit") [1] in 2.32 changed where .got.plt is emitted, avoiding the
warning.
The :NONE in the .vmlinux.info output section description changes the
segment for subsequent allocated sections. Move .vmlinux.info right
above the discards section to place all other sections in the previously
defined segment, .data.
Fixes: 30226853d6 ("s390: vmlinux.lds.S: explicitly handle '.got' and '.plt' sections")
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=afca762f598d453c563f244cd3777715b1a0cb72 [1]
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251008-kbuild-fix-modinfo-regressions-v1-3-9fc776c5887c@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Minor enhancements and fixes, specifically:
- report emulation and alignment faults via perf
- add initial kernel-side support for perf_events
- small initialization fixes in the parisc firmware layer
- adjust TC* constants and avoid referencing termio structs to avoid
userspace build errors.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaOjZoAAKCRD3ErUQojoP
X3cJAQCoSmeEmrWePAQQg/OkUntwkqxb7JEkmzJ6jqR7Cr9ncAD+NKlOiFSRkAvl
FSGG3YZ/oqDSVvjkIGbhCDp16H/pGg4=
=EHkQ
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Minor enhancements and fixes, specifically:
- report emulation and alignment faults via perf
- add initial kernel-side support for perf_events
- small initialization fixes in the parisc firmware layer
- adjust TC* constants and avoid referencing termio structs to avoid
userspace build errors"
* tag 'parisc-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix iodc and device path return values on old machines
parisc: Firmware: Fix returned path for PDC_MODULE_FIND on older machines
parisc: Add initial kernel-side perf_event support
parisc: Report software alignment faults via perf
parisc: Report emulation faults via perf
parisc: don't reference obsolete termio struct for TC* constants
parisc: Remove spurious if statement from raw_copy_from_user()
