Now instead of one submission for each PDE batch them together over all
PDs who need an update.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No more double house keeping.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can do this with a simple mask as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Tonga VF, there're 2 sources updating wptr registers for
sdma3: 1) polling mem and 2) doorbell. When doorbell and polling
mem are both enabled on sdma3, there will be collision hit in
occasion between those two sources when ucode and h/w are doing
the updating on wptr register in parallel. Issue doesn't happen
on CP GFX/Compute since CP drops all doorbell writes when VF is
inactive. So enable polling mem and don't use doorbell for SDMA3.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Horrible inefficient, but avoids problems when the root PD size becomes
to big.
v2: remove incr as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That doesn't hit any more most of the time anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Torture test for MM and VM support, can be used to evict all VRAM while
the system is under load.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the superflous .debugfs_init callback and register all files in
amdgpu_device.c in just one function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Borkmann says:
====================
Couple of outstanding fixes for BPF tree: 1) fixes a perf RB
corruption, 2) and 3) fixes a few build issues from the recent
bpf_perf_event.h uapi corrections. Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
At least on x86_64, the kernel's BPF selftests seemed to have stopped
to build due to 618e165b2a ("selftests/bpf: sync kernel headers and
introduce arch support in Makefile"):
[...]
In file included from test_verifier.c:29:0:
../../../include/uapi/linux/bpf_perf_event.h:11:32:
fatal error: asm/bpf_perf_event.h: No such file or directory
#include <asm/bpf_perf_event.h>
^
compilation terminated.
[...]
While pulling in tools/arch/*/include/uapi/asm/bpf_perf_event.h seems
to work fine, there's no automated fall-back logic right now that would
do the same out of tools/include/uapi/asm-generic/bpf_perf_event.h. The
usual convention today is to add a include/[uapi/]asm/ equivalent that
would pull in the correct arch header or generic one as fall-back, all
ifdef'ed based on compiler target definition. It's similarly done also
in other cases such as tools/include/asm/barrier.h, thus adapt the same
here.
Fixes: 618e165b2a ("selftests/bpf: sync kernel headers and introduce arch support in Makefile")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since c895f6f703 ("bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build
on i386 or x86_64:
[...]
CC init/main.o
In file included from ../include/linux/perf_event.h:18:0,
from ../include/linux/trace_events.h:10,
from ../include/trace/syscall.h:7,
from ../include/linux/syscalls.h:82,
from ../init/main.c:20:
../include/uapi/linux/bpf_perf_event.h:11:32: fatal error:
asm/bpf_perf_event.h: No such file or directory #include
<asm/bpf_perf_event.h>
[...]
Lets add missing bpf_perf_event.h also to um arch. This seems
to be the only one still missing.
Fixes: c895f6f703 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Richard Weinberger <richard@sigma-star.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@sigma-star.at>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When tracing and networking programs are both attached in the
system and both use event-output helpers that eventually call
into perf_event_output(), then we could end up in a situation
where the tracing attached program runs in user context while
a cls_bpf program is triggered on that same CPU out of softirq
context.
Since both rely on the same per-cpu perf_sample_data, we could
potentially corrupt it. This can only ever happen in a combination
of the two types; all tracing programs use a bpf_prog_active
counter to bail out in case a program is already running on
that CPU out of a different context. XDP and cls_bpf programs
by themselves don't have this issue as they run in the same
context only. Therefore, split both perf_sample_data so they
cannot be accessed from each other.
Fixes: 20b9d7ac48 ("bpf: avoid excessive stack usage for perf_sample_data")
Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If CONFIG_DEBUG_SLAB=y, and no PCIe card is inserted, the kernel crashes
during probe on r8a7791/koelsch:
rcar-pcie fe000000.pcie: PCIe link down
Unable to handle kernel paging request at virtual address 6b6b6b6b
(seeing this message requires earlycon and keep_bootcon).
Indeed, pci_free_host_bridge() frees the PCI host bridge, including the
embedded rcar_pcie object, so pci_free_resource_list() must not be called
afterwards.
To fix this, move the call to pci_free_resource_list() up, and update the
label name accordingly.
Fixes: ddd535f1ea ("PCI: rcar: Fix memory leak when no PCIe card is inserted")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The MD5-key that belongs to a connection is identified by the peer's
IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying
to an incoming segment from tcp_check_req() that failed the seq-number
checks.
Thus, to find the correct key, we need to use the skb's saddr and not
the daddr.
This bug seems to have been there since quite a while, but probably got
unnoticed because the consequences are not catastrophic. We will call
tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer,
thus the connection doesn't really fail.
Fixes: 9501f97229 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit d9e2e0143c the 'GuC-specific firmware loader' doc
section was removed from intel_guc_loader.c without a
replacement. So lets remove it from the Kernel-doc::
.. kernel-doc:: drivers/gpu/drm/i915/intel_guc_loader.c
:doc: GuC-specific firmware loader
With commit e8668bbcb0 intel_guc_loader.c was renamed to to
intel_guc_fw.c and to name just one, intel_guc_init_hw() was
renamed to intel_guc_fw_upload(). Since we get errors in the
Sphinx build like:
- Error: Cannot open file ./drivers/gpu/drm/i915/intel_guc_loader.c
Change the kernel-doc directive from intel_guc_loader.c to
intel_guc_fw.c
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
[danvet: Rebase onto the partial fix 006c23327f
("documentation/gpu/i915: fix docs build error after file rename")]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1513078717-12373-1-git-send-email-markus.heiser@darmarit.de
Unconditionally reporting a value seen on the P4 or older invokes
functionality like io_apic_get_unique_id() on 32-bit builds, resulting
in a panic() with sufficiently many CPUs and/or IO-APICs. Doing what
that function does would be the hypervisor's responsibility anyway, so
makes no sense to be used when running on Xen. Uniformly report a more
modern version; this shouldn't matter much as both LAPIC and IO-APIC are
being managed entirely / mostly by the hypervisor.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Now that ACCESS_ONCE() has been excised from the kernel, any uses will
result in a build error, and we no longer need to whine about it in
checkpatch.
This patch removes the newly redundant warning.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/20171127103824.36526-5-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are no longer any kernelspace uses of ACCESS_ONCE(), so we can
remove the definition from <linux/compiler.h>.
This patch removes the ACCESS_ONCE() definition, and updates comments
which referred to it. At the same time, some inconsistent and redundant
whitespace is removed from comments.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/20171127103824.36526-4-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are no longer any usersapce uses of ACCESS_ONCE(), so we can
remove the definition from our userspace <linux/compiler.h>, which is
only used by tools in the kernel directory (i.e. it isn't a uapi
header).
This patch removes the ACCESS_ONCE() definition, and updates comments
which referred to it. At the same time, some inconsistent and redundant
whitespace is removed from comments.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/20171127103824.36526-3-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recently there was a treewide conversion of ACCESS_ONCE() to
{READ,WRITE}_ONCE(), but a new use was introduced concurrently by
commit:
1695849735 ("perf mmap: Move perf_mmap and methods to separate mmap.[ch] files")
Let's convert this over to READ_ONCE() so that we can remove the
ACCESS_ONCE() definitions in subsequent patches.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/20171127103824.36526-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When cleaning up the configurations, make sure we only free the number
of configurations and interfaces that we could have allocated.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only inclusion of asm/uaccess.h should be by linux/uaccess.h. All
other headers should use the latter.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We have a few fixes on dwc3:
- one fix which only happens with some implementations where we need to
wait longer for some commands to finish.
- Another fix for high-bandwidth isochronous endpoint programming making
sure that we send the correct DATA tokens in the correct sequence
- A couple PM fixes on dwc3-of-simple
The other synopsys controller driver (dwc2) got a fix for FIFO size
programming.
Other than these, we have a couple Kconfig fixes making sure that
dependencies are properly setup.
-----BEGIN PGP SIGNATURE-----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=6T1G
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.15-rc4
We have a few fixes on dwc3:
- one fix which only happens with some implementations where we need to
wait longer for some commands to finish.
- Another fix for high-bandwidth isochronous endpoint programming making
sure that we send the correct DATA tokens in the correct sequence
- A couple PM fixes on dwc3-of-simple
The other synopsys controller driver (dwc2) got a fix for FIFO size
programming.
Other than these, we have a couple Kconfig fixes making sure that
dependencies are properly setup.
The ARM architecture defines the memory locations that are permitted
to be accessed as the result of a speculative instruction fetch from
an exception level for which all stages of translation are disabled.
Specifically, the core is permitted to speculatively fetch from the
4KB region containing the current program counter 4K and next 4K.
When translation is changed from enabled to disabled for the running
exception level (SCTLR_ELn[M] changed from a value of 1 to 0), the
Falkor core may errantly speculatively access memory locations outside
of the 4KB region permitted by the architecture. The errant memory
access may lead to one of the following unexpected behaviors.
1) A System Error Interrupt (SEI) being raised by the Falkor core due
to the errant memory access attempting to access a region of memory
that is protected by a slave-side memory protection unit.
2) Unpredictable device behavior due to a speculative read from device
memory. This behavior may only occur if the instruction cache is
disabled prior to or coincident with translation being changed from
enabled to disabled.
The conditions leading to this erratum will not occur when either of the
following occur:
1) A higher exception level disables translation of a lower exception level
(e.g. EL2 changing SCTLR_EL1[M] from a value of 1 to 0).
2) An exception level disabling its stage-1 translation if its stage-2
translation is enabled (e.g. EL1 changing SCTLR_EL1[M] from a value of 1
to 0 when HCR_EL2[VM] has a value of 1).
To avoid the errant behavior, software must execute an ISB immediately
prior to executing the MSR that will change SCTLR_ELn[M] from 1 to 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add cputype definition macros for Qualcomm Datacenter Technologies
Falkor CPU in cputype.h. It's unfortunate that the first revision
of the Falkor CPU used the wrong part number 0x800, got fixed in v2
chip with part number 0xC00, and would be used the same value for
future revisions.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Jiankang reports that our race detection in set_pte_at is firing when
copying the page tables in dup_mmap as a result of a fork(). In this
situation, the page table isn't actually live and so there is no way
that we can race with a concurrent update from the hardware page table
walker.
This patch reworks the race detection so that we require either the
mm to match the current active_mm (i.e. currently installed in our TTBR0)
or the mm_users count to be greater than 1, implying that the page table
could be live in another CPU. The mm_users check might still be racy,
but we'll avoid false positives and it's not realistic to validate that
all the necessary locks are held as part of this assertion.
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Jiankang Chen <chenjiankang1@huawei.com>
Tested-by: Jiankang Chen <chenjiankang1@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
while it found a number of old bugs initially, was also causing too many
false positives that caused people to disable lockdep - which is arguably
a worse overall outcome.
If we disable cross-release by default but keep the code upstream then
in practice the most likely outcome is that we'll allow the situation
to degrade gradually, by allowing entropy to introduce more and more
false positives, until it overwhelms maintenance capacity.
Another bad side effect was that people were trying to work around
the false positives by uglifying/complicating unrelated code. There's
a marked difference between annotating locking operations and
uglifying good code just due to bad lock debugging code ...
This gradual decrease in quality happened to a number of debugging
facilities in the kernel, and lockdep is pretty complex already,
so we cannot risk this outcome.
Either cross-release checking can be done right with no false positives,
or it should not be included in the upstream kernel.
( Note that it might make sense to maintain it out of tree and go through
the false positives every now and then and see whether new bugs were
introduced. )
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 7a9618a22a.
Romain Izard recently reported that commit 7a9618a22a ended up
allowing every legacy gadget driver to statically linked to the
kernel, however that doesn't work, since only one legacy gadget can be
bound to a controller. Because of that, let's revert the original commit
and fix the problem.
Reported-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Configuring the USB_G_WEBCAM driver as built-in leads to a link
error when CONFIG_VIDEO_V4L2 is a loadable module:
drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_setup':
f_uvc.c:(.text+0xfe): undefined reference to `v4l2_event_queue'
drivers/usb/gadget/function/f_uvc.o: In function `uvc_function_ep0_complete':
f_uvc.c:(.text+0x188): undefined reference to `v4l2_event_queue'
This changes the Kconfig dependency to disallow that configuration,
and force it to be a module in that case as well.
This is apparently a rather old bug, but very hard to trigger
even in thousands of randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.
v2: bunch of missing conversions (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
Kick it out of i915_ggtt and keep it grouped with dsm and dsm_reserved,
where it makes the most sense.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-9-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the mappable region in a resource as well.
v2: prefer iomap and gmadr naming scheme
prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-8-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the reserved portion of that region in a
resource as well.
v2: s/<= end + 1/< end/ (Chris)
v3: prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-7-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.
v2: check range_overflow when writing to 32b registers (Chris)
pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
We duplicate the stolen discovery code in early-quirks and in i915,
however now that the stolen region is exported as a resource from
early-quirks we can nuke the duplication.
v2: check overflows_type
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-5-matthew.auld@intel.com
Replace the magical +2, +9 etc. with +MB, which is far easier to read.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-4-matthew.auld@intel.com
We duplicate the stolen discovery code in early-quirks and in i915,
however if we just export the region as a resource from early-quirks we
can nuke the duplication.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-3-matthew.auld@intel.com
To give upcoming SKU BIOSes more flexibility in placing the Intel
graphics stolen memory, make all variables storing the placement or size
compatible with full 64 bit range.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-2-matthew.auld@intel.com
When CONFIG_GENERIC_LOCKBEAK=y, locking structures grow an extra int ->break_lock
field which is used to implement raw_spin_is_contended() by setting the field
to 1 when waiting on a lock and clearing it to zero when holding a lock.
However, there are a few problems with this approach:
- There is a write-write race between a CPU successfully taking the lock
(and subsequently writing break_lock = 0) and a waiter waiting on
the lock (and subsequently writing break_lock = 1). This could result
in a contended lock being reported as uncontended and vice-versa.
- On machines with store buffers, nothing guarantees that the writes
to break_lock are visible to other CPUs at any particular time.
- READ_ONCE/WRITE_ONCE are not used, so the field is potentially
susceptible to harmful compiler optimisations,
Consequently, the usefulness of this field is unclear and we'd be better off
removing it and allowing architectures to implement raw_spin_is_contended() by
providing a definition of arch_spin_is_contended(), as they can when
CONFIG_GENERIC_LOCKBREAK=n.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1511894539-7988-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
a8a217c221 ("locking/core: Remove {read,spin,write}_can_lock()")
removed the definition of raw_spin_can_lock(), causing the GENERIC_LOCKBREAK
spin_lock() routines to poll the ->break_lock field when waiting on a lock.
This has been reported to cause a deadlock during boot on s390, because
the ->break_lock field is also set by the waiters, and can potentially
remain set indefinitely if no other CPUs come in to take the lock after
it has been released.
This patch removes the explicit spinning on ->break_lock from the waiters,
instead relying on the outer trylock() operation to determine when the
lock is available.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a8a217c221 ("locking/core: Remove {read,spin,write}_can_lock()")
Link: http://lkml.kernel.org/r/1511894539-7988-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avoid that scsi_show_rq() triggers a NULL pointer dereference if called
after sd_uninit_command(). Swap the NULL pointer assignment and the
mempool_free() call in sd_uninit_command() to make it less likely that
scsi_show_rq() triggers a use-after-free. Note: even with these changes
scsi_show_rq() can trigger a use-after-free but that's a lesser evil
than e.g. suppressing debug information for T10 PI Type 2 commands
completely. This patch fixes the following oops:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: scsi_format_opcode_name+0x1a/0x1c0
CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516
Call Trace:
__scsi_format_command+0x27/0xc0
scsi_show_rq+0x5c/0xc0
__blk_mq_debugfs_rq_show+0x116/0x130
blk_mq_debugfs_rq_show+0xe/0x10
seq_read+0xfe/0x3b0
full_proxy_read+0x54/0x90
__vfs_read+0x37/0x160
vfs_read+0x96/0x130
SyS_read+0x55/0xc0
entry_SYSCALL_64_fastpath+0x1a/0xa5
[mkp: added Type 2]
Fixes: 0eebd005dd ("scsi: Implement blk_mq_ops.show_rq()")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fcoe-devel@open-fcoe.org is defunct and all patches are routed via the
SCSI tree anyways.
So update MAINTAINERS accordingly.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value of smp_execute_task_sg() is the untransferred residual,
but bsg_job_done() requires the length of payload received. This makes
SMP passthrough commands from userland by sg ioctl to libsas get a wrong
response. The userland tools such as smp_utils failed because of these
wrong responses:
~#smp_discover /dev/bsg/expander-2\:13
response too short, len=0
~#smp_discover /dev/bsg/expander-2\:134
response too short, len=0
Fix this by passing the actual received length to bsg_job_done(). And if
smp_execute_task_sg() returns 0, this means received length is exactly
the buffer length.
[mkp: typo]
Fixes: 651a013649 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reported-by: chenqilin <chenqilin2@huawei.com>
Tested-by: chenqilin <chenqilin2@huawei.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allocation won't fail in the current kernel because it's small but
not checking for kmalloc() failures introduces static checker warnings
so let's fix it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Sending the switch state change twice within the same frame is invalid
evdev protocol and only works if the client handles keys immediately as
well. Processing events immediately is incorrect, it forces a fake
order of events that does not exist on the device.
Recent versions of libinput changed to only process the device state and
SYN_REPORT time, so now the key event is lost.
https://bugs.freedesktop.org/show_bug.cgi?id=104041
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This machine reports number of keyboard backlight led levels, instead of
value of the last led level index. Therefore max_brightness properly needs
to be subtracted by 1 to match led max_brightness API.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Pull percpu fix from Tejun Heo:
"Just one patch to work around CRIS boot problem caused by a recent
change which freed a temporary boot data structure. The root cause is
on CRIS side but it doesn't seem trivial to fix. For now, work around
by skipping freeing on CRIS"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: hack to let the CRIS architecture to boot until they clean up
Pull cgroup fixes from Tejun Heo:
- Prateek posted a couple patches to fix a deadlock involving cpuset
and workqueue. It unfortunately caused a different deadlock and the
recent workqueue hotplug simplification removed the original
deadlock, so Prateek's two patches are reverted for now.
- The new stat code was missing u64_stats initialization. Fixed.
- Doc and other misc changes
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add warning about RT not being supported on cgroup2
Revert "cgroup/cpuset: remove circular dependency deadlock"
Revert "cpuset: Make cpuset hotplug synchronous"
cgroup: properly init u64_stats
debug cgroup: use task_css_set instead of rcu_dereference
cpuset: Make cpuset hotplug synchronous
cgroup/cpuset: remove circular dependency deadlock
