Add a new getsockopt_iter callback to struct proto_ops that uses
sockopt_t, a type-safe wrapper around iov_iter. This provides a clean
interface for socket option operations that works with both user and
kernel buffers.
The sockopt_t type encapsulates an iov_iter and an optlen field.
The optlen field, although not suggested by Linus, serves as both input
(buffer size) and output (returned data size), allowing callbacks to
return random values independent of the bytes written via
copy_to_iter(), so, keep it separated from iov_iter.count.
This is preparatory work for removing the SOL_SOCKET level restriction
from io_uring getsockopt operations.
Keep in mind that both iter_out and iter_in always point to the same
data at all times, and we just have two of them to make the callback
implementation sane.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-1-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
-----BEGIN PGP SIGNATURE-----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=jFF1
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
* tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (59 commits)
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
Bluetooth: btintel_pcie: use strscpy to copy plain strings
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
Bluetooth: hci.h: Avoid a couple -Wflex-array-member-not-at-end warnings
Bluetooth: SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
Bluetooth: btintel_pcie: Align shared DMA memory to 128 bytes
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
Bluetooth: hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
Bluetooth: btusb: MediaTek MT7922: Add VID 0489 & PID e11d
Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array
Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator
Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
Bluetooth: btmtk: fix ISO interface setup for single alt setting
Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
Bluetooth: btmtk: refactor endpoint lookup
...
====================
Link: https://patch.msgid.link/20260413132247.320961-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under Fixes moved recomputing the window clamp to
tcp_measure_rcv_mss() (when scaling_ratio changes).
I suspect it missed the fact that we don't recompute the clamp
when rcvbuf is set. Until scaling_ratio changes we are
stuck with the old window clamp which may be based on
the small initial buffer. scaling_ratio may never change.
Inspired by Eric's recent commit d1361840f8 ("tcp: fix
SO_RCVLOWAT and RCVBUF autotuning") plumb the user action
thru to TCP and have it update the clamp.
A smaller fix would be to just have tcp_rcvbuf_grow()
adjust the clamp even if SOCK_RCVBUF_LOCK is set.
But IIUC this is what we were trying to get away from
in the first place.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/20260408001438.129165-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
struct hci_std_codecs and struct hci_std_codecs_v2 are flexible
structures, this is structures that contain a flexible-array member
(__u8 codec[]; and struct hci_std_codec_v2 codec[];, correspondingly.)
Since struct hci_rp_read_local_supported_codecs and struct
hci_rp_read_local_supported_codecs_v2 are defined by hardware, we
create the new struct hci_std_codecs_hdr and struct hci_std_codecs_v2_hdr
types, and use them to replace the object types causing trouble in
struct hci_rp_read_local_supported_codecs and struct
hci_rp_read_local_supported_codecs_v2, namely struct hci_std_codecs
std_codecs; and struct hci_std_codecs_v2_hdr std_codecs;.
Also, once -fms-extensions is enabled, we can use transparent struct
members in both struct hci_std_codecs and struct hci_std_codecs_v2_hdr.
Notice that the newly created types does not contain the flex-array
member `codec`, which is the object causing the -Wfamnae warnings.
After these changes, the size of struct hci_rp_read_local_supported_codecs
and struct hci_rp_read_local_supported_codecs_v2, along with their
member's offsets remain the same, hence the memory layouts don't
change:
Before changes:
struct hci_rp_read_local_supported_codecs {
__u8 status; /* 0 1 */
struct hci_std_codecs std_codecs; /* 1 1 */
struct hci_vnd_codecs vnd_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
struct hci_rp_read_local_supported_codecs_v2 {
__u8 status; /* 0 1 */
struct hci_std_codecs_v2 std_codecs; /* 1 1 */
struct hci_vnd_codecs_v2 vendor_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
After changes:
struct hci_rp_read_local_supported_codecs {
__u8 status; /* 0 1 */
struct hci_std_codecs_hdr std_codecs; /* 1 1 */
struct hci_vnd_codecs vnd_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
struct hci_rp_read_local_supported_codecs_v2 {
__u8 status; /* 0 1 */
struct hci_std_codecs_v2_hdr std_codecs; /* 1 1 */
struct hci_vnd_codecs_v2 vendor_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
With these changes fix the following warnings:
include/net/bluetooth/hci.h:1490:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
include/net/bluetooth/hci.h:1525:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Separate the rx and tx enablement/disablement into different
functions so that it is easier to interact with them independently
later.
Although this patch changes receive and transmit paths, the actual
behavior of the teaming driver should remain unchanged, since there
is no option introduced yet to change rx or tx enablement
independently. Those options will be added in follow-up patches.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-7-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add no functional changes, but rename enablement functions, variables
etc. that are used in teaming driver transmit decisions.
Since rx and tx enablement are still coupled, some of the variables
renamed in this patch are still used for the rx path, but that will
change in a follow-up patch.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-6-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This team mode op is only used by the load balance mode, and it only
uses it in the tx path.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-3-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This team_mode_op wasn't used by any of the team modes, so remove it.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-2-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The team_port's "index" and the team's "en_port_count" are read in
the hot transmit path, but are only written to when holding the rtnl
lock.
Use READ_ONCE() for all lockless reads of these values, and use
WRITE_ONCE() for all writes.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-1-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The sk member can be directly accessed from struct pppox_sock without
relying on type casting. Remove the sk_pppox() helper and update all
call sites to use po->sk directly.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260410054954.114031-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5-next updates 2026-04-09
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add icm_mng_function_id_mode cap bit
net/mlx5: Rename MLX5_PF page counter type to MLX5_SELF
net/mlx5: Add vhca_id_type bit to alias context
mlx5: Remove redundant iseg base
====================
Link: https://patch.msgid.link/20260409110431.154894-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap() will soon return the reason by value,
do the same for tcp_filter().
Note:
tcp_filter() is no longer inlined. Following patch will inline it again.
$ scripts/bloat-o-meter -t vmlinux.4 vmlinux.5
add/remove: 2/0 grow/shrink: 0/2 up/down: 186/-43 (143)
Function old new delta
tcp_filter - 154 +154
__pfx_tcp_filter - 32 +32
tcp_v4_rcv 3152 3143 -9
tcp_v6_rcv 3169 3135 -34
Total: Before=29722640, After=29722783, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap will soon return the reason by value,
do the same for sk_filter_reason().
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-21 (-21)
Function old new delta
sock_queue_rcv_skb_reason 128 126 -2
tun_net_xmit 1146 1127 -19
Total: Before=29722661, After=29722640, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .disable_autonomous_eee callback for the BCM54210E.
In AutogrEEEn mode the PHY manages EEE autonomously. Clearing the
AutogrEEEn enable bit in MII_BUF_CNTL_0 switches the PHY to Native
EEE mode.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-2-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PHYs (e.g. Broadcom BCM54xx, Realtek RTL8211F) implement
autonomous EEE where the PHY manages LPI signaling without forwarding
it to the MAC. This conflicts with MAC drivers that implement their own
LPI control.
Add a .disable_autonomous_eee callback to struct phy_driver and call it
from phy_support_eee(). When a MAC driver indicates it supports EEE via
phy_support_eee(), the PHY's autonomous EEE is automatically disabled so
the MAC can manage LPI entry/exit.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-1-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nla_len field in struct nlattr is a __u16, which can only hold
values up to 65535. If a nested attribute grows beyond this limit,
nla_nest_end() silently truncates the length, producing a corrupted
netlink message with no indication of the problem.
Since nla_nest_end() is used everywhere and this issue rarely happens,
let's add a new helper to check the length.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-4-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add struct tso_dma_map to tso.h for tracking DMA addresses of mapped
GSO payload data and tso_dma_map_completion_state.
The tso_dma_map combines DMA mapping storage with iterator state, allowing
drivers to walk pre-mapped DMA regions linearly. Includes fields for
the DMA IOVA path (iova_state, iova_offset, total_len) and a fallback
per-region path (linear_dma, frags[], frag_idx, offset).
The tso_dma_map_completion_state makes the IOVA completion state opaque
for drivers. Drivers are expected to allocate this and use the added
helpers to update the completion state.
Adds skb_frag_phys() to skbuff.h, returning the physical address
of a paged fragment's data, which is used by the tso_dma_map helpers
introduced in this commit described below.
The added TSO DMA map helpers are:
tso_dma_map_init(): DMA-maps the linear payload region and all frags
upfront. Prefers the DMA IOVA API for a single contiguous mapping with
one IOTLB sync; falls back to per-region dma_map_phys() otherwise.
Returns 0 on success, cleans up partial mappings on failure.
tso_dma_map_cleanup(): Handles both IOVA and fallback teardown paths.
tso_dma_map_count(): counts how many descriptors the next N bytes of
payload will need. Returns 1 if IOVA is used since the mapping is
contiguous.
tso_dma_map_next(): yields the next (dma_addr, chunk_len) pair.
On the IOVA path, each segment is a single contiguous chunk. On the
fallback path, indicates when a chunk starts a new DMA mapping so the
driver can set dma_unmap_len on that descriptor for completion-time
unmapping.
tso_dma_map_completion_save(): updates the completion state. Drivers
will call this at xmit time.
tso_dma_map_complete(): tears down the mapping at completion time and
returns true if the IOVA path was used. If it was not used, this is a
no-op and returns false.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmnYzgIbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gCfDw/+
KWf9fUlsE3uaxK889hfR0QU5ANQ03Ix1eVvr6Vh0Y5Za1glZDUuls0EsH0ej7/36
ZQqAu2vaevHTVZl3EhAS1vu8KBcldl36YEtvJsQXFkFuOoO3F/dBdttwAif2tzv8
ammqXOKicRHok1A3cy8R1fkGFAHpfn5BjBc68A0+SY1N2NFVdVNS9BP4p7tuSdkk
JCj3TdDmBcddZ3SnY/z27S4+8jUL3e7HEAbsMApzIERcxe1w/6gEbb5Oa6AUwtHT
2SwQlUyhBa6gx2tARgUsHcck5QiW8b1tX7y1tzyo2q6rw78m1Eublib5nYCav/w8
9pSjRLlzSYBQ22e3wz7WqFXZRaM5+O38s3Moxfn/xrQblTk8CyW/5zGQJKivW9oG
LEirCPbL6U6ZB/2Uy+3EvzG5TBP3cppB5sXaQfMdSQ03wvYFXMN35hb54ePZW6CX
Db3lCwimOuXq+hkjVzZIU9ZmGr03oNohFX1GA0gDqrWtc9KsEKW8/KQvX61N8QK3
YEMIZ6fbMkstCY98fS3j6r6+V1he6wzcZpsqjd9FACYXtf8LQbPvoMA4BfcGR8+X
iQVEZcrvdGa39VH1TQFlXJIe/Pv+9tZ+CF44MsrNyYH0mD4gTInajklO3lkw/YQj
RQTHJLal9RCF9gVZRqHgkpE8vUj0mtUkp6Atz6En4mU=
=C/nr
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1-3) IPVS updates from Julian Anastasov to enhance visibility into
IPVS internal state by exposing hash size, load factor etc and
allows userspace to tune the load factor used for resizing hash
tables.
4) reject empty/not nul terminated device names from xt_physdev.
This isn't a bug fix; existing code doesn't require a c-string.
But clean this up anyway because conceptually the interface name
definitely should be a c-string.
5) Switch nfnetlink to skb_mac_header helpers that didn't exist back
when this code was written. This gives us additional debug checks
but is not intended to change functionality.
6) Let the xt ttl/hoplimit match reject unknown operator modes.
This is a cleanup, the evaluation function simply returns false when
the mode is out of range. From Marino Dzalto.
7) xt_socket match should enable defrag after all other checks. This
bug is harmless, historically defrag could not be disabled either
except by rmmod.
8) remove UDP-Lite conntrack support, from Fernando Fernandez Mancera.
9) Avoid a couple -Wflex-array-member-not-at-end warnings in the old
xtables 32bit compat code, from Gustavo A. R. Silva.
10) nftables fwd expression should drop packets when their ttl/hl has
expired. This is a bug fix deferred, its not deemed important
enough for -rc8.
11) Add additional checks before assuming the mac header is an ethernet
header, from Zhengchuan Liang.
* tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: require Ethernet MAC header before using eth_hdr()
netfilter: nft_fwd_netdev: check ttl/hl before forwarding
netfilter: x_tables: Avoid a couple -Wflex-array-member-not-at-end warnings
netfilter: conntrack: remove UDP-Lite conntrack support
netfilter: xt_socket: enable defrag after all other checks
netfilter: xt_HL: add pr_fmt and checkentry validation
netfilter: nfnetlink: prefer skb_mac_header helpers
netfilter: x_physdev: reject empty or not-nul terminated device names
ipvs: add conn_lfactor and svc_lfactor sysctl vars
ipvs: add ip_vs_status info
ipvs: show the current conn_tab size to users
====================
Link: https://patch.msgid.link/20260410112352.23599-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
-----BEGIN PGP SIGNATURE-----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=lf+O
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small improvement in SYN processing, to directly call
tcp_v6_init_seq_and_ts_off() or tcp_v4_init_seq_and_ts_off().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260410174950.745670-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Part of a stack canary removal from tcp_v{4,6}_rcv().
Return a drop_reason instead of a boolean, so that we no longer
have to pass the address of a local variable.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-37 (-37)
Function old new delta
tcp_v6_rcv 3133 3129 -4
tcp_v4_rcv 3206 3202 -4
tcp_add_backlog 1281 1252 -29
Total: Before=25567186, After=25567149, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409101147.1642967-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge-stp usermode helper is currently restricted to the initial
network namespace, preventing userspace STP daemons (e.g. mstpd) from
operating on bridges in other network namespaces. Since commit
ff62198553 ("bridge: Only call /sbin/bridge-stp for the initial
network namespace"), bridges in non-init namespaces silently fall
back to kernel STP with no way to use userspace STP.
Add a new bridge attribute IFLA_BR_STP_MODE that allows explicit
per-bridge control over STP mode selection:
BR_STP_MODE_AUTO (default) - Existing behavior: invoke the
/sbin/bridge-stp helper in init_net only; fall back to kernel STP
if it fails or in non-init namespaces.
BR_STP_MODE_USER - Directly enable userspace STP (BR_USER_STP)
without invoking the helper. Works in any network namespace.
Userspace is responsible for ensuring an STP daemon manages the
bridge.
BR_STP_MODE_KERNEL - Directly enable kernel STP (BR_KERNEL_STP)
without invoking the helper.
The mode can only be changed while STP is disabled, or set to the
same value (-EBUSY otherwise). IFLA_BR_STP_MODE is processed before
IFLA_BR_STP_STATE in br_changelink(), so both can be set atomically
in a single netlink message. The mode can also be changed in the
same message that disables STP.
The stp_mode struct field is u8 since all possible values fit, while
NLA_U32 is used for the netlink attribute since it occupies the same
space in the netlink message as NLA_U8.
A new stp_helper_active boolean tracks whether the /sbin/bridge-stp
helper was invoked during br_stp_start(), so that br_stp_stop() only
calls the helper for stop when it was called for start. This avoids
calling the helper asymmetrically when stp_mode changes between
start and stop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-2-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
UDP-Lite (RFC 3828) socket support was recently retired from the core
networking stack. As a follow-up of that, drop the connection tracker
and NAT support for UDP-Lite in Netfilter.
This patch removes CONFIG_NF_CT_PROTO_UDPLITE and scrubs UDP-Lite
awareness from the conntrack core, NAT core, nft_ct, and ctnetlink.
Please note that stateless packet inspection, matching, ipsets or
logging support for IPPROTO_UDPLITE is preserved.
As conntrack no longer extracts UDP-Lite ports or tracks its L4 state,
when performing NAT the UDP-Lite checksum cannot be updated anymore.
That is an expected and acceptable consequence of removing UDP-Lite
conntrack module.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
The netif_get_rx_queue_lease_locked() API hides the locking
and the descend onto the leased queue. Making the code
harder to follow (at least to me). Remove the API and open
code the descend a bit. Most of the code now looks like:
if (!leased)
return __helper(x);
hw_rxq = ..
netdev_lock(hw_rxq->dev);
ret = __helper(x);
netdev_unlock(hw_rxq->dev);
return ret;
Of course if we have more code paths that need the wrapping
we may need to revisit. For now, IMHO, having to know what
netif_get_rx_queue_lease_locked() does is not worth the 20LoC
it saves.
Link: https://patch.msgid.link/20260408151251.72bd2482@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a single device mode for netkit instead of netkit pairs. The primary
target for the paired devices is to connect network namespaces, of course,
and support has been implemented in projects like Cilium [0]. For the rxq
leasing the plan is to support two main scenarios related to single device
mode:
* For the use-case of io_uring zero-copy, the control plane can either
set up a netkit pair where the peer device can perform rxq leasing which
is then tied to the lifetime of the peer device, or the control plane
can use a regular netkit pair to connect the hostns to a Pod/container
and dynamically add/remove rxq leasing through a single device without
having to interrupt the device pair. In the case of io_uring, the memory
pool is used as skb non-linear pages, and thus the skb will go its way
through the regular stack into netkit. Things like the netkit policy when
no BPF is attached or skb scrubbing etc apply as-is in case the paired
devices are used, or if the backend memory is tied to the single device
and traffic goes through a paired device.
* For the use-case of AF_XDP, the control plane needs to use netkit in the
single device mode. The single device mode currently enforces only a
pass policy when no BPF is attached, and does not yet support BPF link
attachments for AF_XDP. skbs sent to that device get dropped at the
moment. Given AF_XDP operates at a lower layer of the stack tying this
to the netkit pair did not make sense. In future, the plan is to allow
BPF at the XDP layer which can: i) process traffic coming from the AF_XDP
application (e.g. QEMU with AF_XDP backend) to filter egress traffic or
to push selected egress traffic up to the single netkit device to the
local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the
single netkit into the AF_XDP application (e.g. DHCP replies). Also,
the control-plane can dynamically manage rxq leasing for the single
netkit device without having to interrupt (e.g. down/up cycle) the main
netkit pair for the Pod which has traffic going in and out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jordan Rife <jordan@jrife.io>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://docs.cilium.io/en/stable/operations/performance/tuning/#netkit-device-mode [0]
Link: https://patch.msgid.link/20260402231031.447597-11-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend netdev_queue_get_dma_dev to return the physical device of the
real rxq for DMA in case the queue was leased. This allows memory
providers like io_uring zero-copy or devmem to bind to the physically
leased rxq via virtual devices such as netkit.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-8-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_mp_open_rxq is currently not used in the tree as all callers are
using __net_mp_open_rxq directly, and net_mp_close_rxq is only used
once while all other locations use __net_mp_close_rxq.
Consolidate into a single API, netif_mp_{open,close}_rxq, using the
netif_ prefix to indicate that the caller is responsible for locking.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-6-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Populate nested lease info to the queue-get response that returns the
ifindex, queue id with type and optionally netns id if the device
resides in a different netns.
Example with ynl client when using AF_XDP via queue leasing:
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp/id:24 qdisc mq state UP group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
inet6 fe80::eaeb:d3ff:fea3:43f6/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ethtool -i enp10s0f0np0
driver: mlx5_core
[...]
# ynl --family netdev --output-json --do queue-get \
--json '{"ifindex": 4, "id": 15, "type": "rx"}'
{'id': 15,
'ifindex': 4,
'lease': {'ifindex': 8, 'netns-id': 0, 'queue': {'id': 1, 'type': 'rx'}},
'napi-id': 8227,
'type': 'rx',
'xsk': {}}
# ip netns list
foo (id: 0)
# ip netns exec foo ip a
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet6 fe80::200:ff:fe00:0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ip netns exec foo ethtool -i nk
driver: netkit
[...]
# ip netns exec foo ls /sys/class/net/nk/queues/
rx-0 rx-1 tx-0
# ip netns exec foo ynl --family netdev --output-json --do queue-get \
--json '{"ifindex": 8, "id": 1, "type": "rx"}'
{"id": 1, "type": "rx", "ifindex": 8, "xsk": {}}
Note that the caller of netdev_nl_queue_fill_one() holds the netdevice
lock. For the queue-get we do not lock both devices. When queues get
{un,}leased, both devices are locked, thus if __netif_get_rx_queue_lease()
returns a lease pointer, it points to a valid device. The netns-id is
fetched via peernet2id_alloc() similarly as done in OVS.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-4-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ynl --family netdev --output-json --do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the capability bit icm_mng_function_id_mode to indicate that
the device firmware uses vhca_id instead of function_id as the effective
identifier for the firmware commands MANAGE_PAGES, QUERY_PAGES, and page
request event.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The MLX5_PF enum value in mlx5_func_type is used to track firmware
page allocations for the page manager function itself, which is either
the ECPF on SmartNIC systems or the host PF when there is no ECPF.
Rename it to MLX5_SELF to accurately reflect that this counter tracks
pages allocated by the manager for its own use, regardless of whether
it is a PF or ECPF.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow filtering the resource dump to device-level or port-level
resources using the 'scope' option.
Example - dump only device-level resources:
$ devlink resource show scope dev
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
Example - dump only port-level resources:
$ devlink resource show scope port
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current devlink resource infrastructure supports only device-level
resources. Some hardware resources are associated with specific ports
rather than the entire device, and today we have no way to show resource
per-port.
Add support for registering resources at the port level.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the resource functions take devlink pointer as parameter
and take the resource list from there.
Allow resource functions to work with other resource lists that will
be added in next patches and not only with the devlink's resource list.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This has accumulated some fields which are no longer parsed by the core
or set by any driver. Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260406212158.721806-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current MPTCP-level RTT estimator has several issues. On high speed
links, the MPTCP-level receive buffer auto-tuning happens with a
frequency well above the TCP-level's one. That in turn can cause
excessive/unneeded receive buffer increase.
On such links, the initial rtt_us value is considerably higher than the
actual delay, and the current mptcp_rcv_space_adjust() updates
msk->rcvq_space.rtt_us with a period equal to the such field previous
value. If the initial rtt_us is 40ms, its first update will happen after
40ms, even if the subflows see actual RTT orders of magnitude lower.
Additionally:
- setting the msk RTT to the maximum among all the subflows RTTs makes
DRS constantly overshooting the rcvbuf size when a subflow has
considerable higher latency than the other(s).
- during unidirectional bulk transfers with multiple active subflows,
the TCP-level RTT estimator occasionally sees considerably higher
value than the real link delay, i.e. when the packet scheduler reacts
to an incoming ACK on given subflow pushing data on a different
subflow.
- currently inactive but still open subflows (i.e. switched to backup
mode) are always considered when computing the msk-level RTT.
Address the all the issues above with a more accurate RTT estimation
strategy: the MPTCP-level RTT is set to the minimum of all the subflows
actually feeding data into the MPTCP receive buffer, using a small
sliding window.
While at it, also use EWMA to compute the msk-level scaling_ratio, to
that MPTCP can avoid traversing the subflow list is
mptcp_rcv_space_adjust().
Use some care to avoid updating msk and ssk level fields too often.
Fixes: a6b118febb ("mptcp: add receive buffer auto-tuning")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260407-net-next-mptcp-reduce-rbuf-v2-1-0d1d135bf6f6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipvlan and macvlan use queues to process broadcast/multicast packets
from a work queue.
Under attack these queues can drop packets.
Add MACVLAN_BROADCAST_BACKLOG drop_reason for macvlan broadcast queue.
Add IPVLAN_MULTICAST_BACKLOG drop_reason for ipvlan multicast queue.
Use different reasons as some deployments use both ipvlan and macvlan.
Also change ipvlan_rcv_frame() to use SKB_DROP_REASON_DEV_READY
when the device is not UP.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150710.1640747-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
