mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
57,225 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
93e4b3076b |
Char/Misc/IIO/etc driver update for 7.3-rc1
Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code than
removed, which was a nice change. Highlights in this merge request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while, with the only reported
issues being some major merge conflicts. Miguel pointed out some of
these with the Rust tree merge, which is the majority of them. I'll
follow up with a diffstat of the merge resolution I made against your
most recent tree, which works for me.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao143A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtUgCeKB62gT1JfA86cg3NDB1opp+10N0An3oBBegQ
IJLqJgK45dTNtMGBwGFV
=68af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
||
|
|
ed3b875bea |
mm.git review status for mm-hotfixes-stable..mm-stable
Everything:
Total patches: 501
Reviews/patch: 1.66
Reviewed rate: 70%
Excluding DAMON:
Total patches: 356
Reviews/patch: 2.26
Reviewed rate: 90%
Excluding DAMON and selftests:
Total patches: 329
Reviews/patch: 2.31
Reviewed rate: 92%
Excluding DAMON, selftests and maple_tree:
Total patches: 328
Reviews/patch: 2.31
Reviewed rate: 92%
Summary of patch series in this merge:
- The 2 patch series "mm: drop "sub" prefix from various places" from
Dev Jain implements some page->folio conversion and a naming cleanup.
- The 2 patch series "mm/kasan: remove redundant initialization for
kasan_flag_write_only" from Igor Putko provides some KASAN cleanup work.
- The 2 patch series "mm/filemap: reduce unnecessary xarray lookups"
from Chi Zhiling provides a small speedup in the pagecaache read code.
- The 4 patch series "mm/percpu: Fix possible NOFS/NOIO reclaim
recursion" from Kaitao Cheng improves a few things in the vmalloc code -
mainly the avoidance of GFP_KERNEL allocations when the caller asked for
GFP_NOFS or GFP_NOIO.
- The 3 patch series "mm/kmemleak: avoid soft lockup when scanning task
stacks" from Breno Leitao avoids a soft lockup watchdog trigger from the
kmemleak scanning code in extreme situations.
- The 6 patch series "mm/page_owner: misc cleanups" from Ye Liu is a
collection of unrelated cleanups to the page_owner code. For some
reason lots of people have been working on the page_owner code this
cycle.
- The 4 patch series "mm: convert to walk_page_range_vma() to eliminate
find_vma()" from Kefeng Wang simplifies and accelerates the page walking
library function.
- The 3 patch series "mm/migrate: preparatory cleanups for batch copy
and offload" from Shivank Garg implements cleanups in the migration
code.
- The 4 patch series "mm/page_owner: add per-fd filter infrastructure
for print_mode and NUMA filtering" from Zhen Ni provides per-fd
filtering to page_owner in order to reduce the sometimes vast amount of
output it can produce.
- The 19 patch series "mm: Refactor bootmem gigantic hugepage
allocation" from Muchun Song is a "set of fixes and preparatory cleanups
around bootmem HugeTLB handling, sparse initialization ordering, and
related vmemmap setup".
- The 4 patch series "mm/zsmalloc: reduce lock contention in zs_free()"
from Wenchao Hao reduces lock contention in zs_free(), which dominates
the unmap path under memory pressure on Android (LMK kills) and on x86
servers running zswap-heavy workloads. Up to 1.83x improvement in
microbenchmarking.
- The 2 patch series "move alloc_tag.c file under mm/" from Suren
Baghdasaryan does that.
- The 6 patch series "samples/damon: handle damon_{start,stop}()
failures" from SJ Park fixes improper handling of damon_start(),
damon_stop(), and damon_call() failures across DAMON sample modules to
prevent potential memory leaks, operation disruptions and use-after-free
bugs.
- The 11 patch series "mm/damon/sysfs: kobject_del() directories that
users can create/remove" from SJ Park resolves an issue where delayed
sysfs directory removal under CONFIG_DEBUG_KOBJECT_RELEASE causes
creation failures due to duplicate directory names by adding missing
kobject_del() calls before creating new directories.
- The 3 patch series "mm: cleanup clear_not_present_full_ptes()" from
David Hildenbrand cleans up the core pte handling code.
- The 3 patch series "selftests/damon: misc fixes for test bugs" from
Kunwu Chan fixes several bugs in the DAMON selftests.
- The 2 patch series "selftests/damon: fix memcg_path staging handling"
from Cheng Nie fixes a bug in _damon_sysfs.py for damos_filter
memcg_path setup, and adds a test case for it in sysfs.py.
- The 2 patch series "selftests/damon: test kdamond refresh_ms" from
Ruslan Valiyev introduces selftest coverage for DAMON's refresh_ms sysfs
feature by updating the test control module and verifying that scheme
stats update automatically without manual intervention.
- The 5 patch series "mm/damon: five misc fixups" from Akinobu Mita
contains miscellaneous DAMON fixups.
- The 2 patch series "mm/damon/core: detect internal variation above
max_nr_regions/2" from Jiayuan Chen fixes DAMON's region splitting
behavior when region counts exceed half the maximum budget by
dynamically scaling down the split fraction as the limit approaches,
preventing large regions from staying un-split, and adds corresponding
KUnit test coverage.
- The 6 patch series "mm: preparatory patches for PMD level swap
entries" from Usama Arif refactors and cleans up PMD softleaf helpers,
call sites, and architecture flags to lay the groundwork for a follow-up
series that introduces PMD page table swap entries.
- The 11 patch series "mm/damon: update, optimize, and clean up doc,
tests, and code" from SJ Park updates DAMON design and ABI
documentation, expands unit and selftest coverage, optimizes
damon_commit_target_regions(), and cleans up recently added sysfs
interface code for better readability.
- The 2 patch series "mm/vmpressure: reduce CPU, memory and code
overhead on cgroup v2" from Usama Arif optimizes vmpressure() by
skipping unnecessary work on cgroup v2 for userspace event notifications
and refactors v1-only eventfd handling into mm/memcontrol-v1.c to reduce
memory overhead and code complexity.
- The 10 patch series "selftests/mm: refactor pkey helpers and fix mmap
error handling" from Hongfu Li refactors pkeys shared tracing and
assertion helpers into a common file, unifies protection key selftests
to use consistent diagnostic logging and assertions, and enforces
standardized MAP_FAILED return checks for mmap() calls across the tests.
- The 18 patch series "mm/damon: optimize out nr_accesses_bp" from SJ
Park replaces the error-prone, continuously updated nr_accesses_bp field
in damon_region with an on-demand moving sum function
(damon_nr_accesses_mvsum()), reducing structure memory overhead and
avoiding state corruption bugs.
- The 6 patch series "Open HugeTLB allocation routine for more generic
use" from Ackerley Tng decouples HugeTLB folio allocation from VMA
dependencies by introducing hugetlb_alloc_folio(), enabling subsystems
like guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs.
- The 3 patch series "mm/damon: provide pseudo moving sum probe_hits"
from SJ Park integrates DAMON's probe_hits attribute counter into the
pseudo moving sum infrastructure, enabling real-time, online monitoring
without waiting for full aggregation intervals.
- The 18 patch series "mm: Some cleanups for page allocator APIs" from
Brendan Jackman simplifies and refactors the page allocator entry points
and flags by unifying allocation paths, adding internal alloc_flags
arguments, and eliminating redundant __ prefixed alloc_pages variants.
- The 5 patch series "Fix incorrect access of hugetlb pte entries" from
Dev Jain enforces the consistent use of huge_ptep_get() instead of
ptep_get() for HugeTLB entries and fixes an unaligned address issue in
arm64's huge_ptep_get() implementation.
- The 8 patch series "mm/damon: validate all parameters in the core"
from SJ Park consolidates parameter validation into the DAMON core
specifically within damon_start() and damon_commit_ctx() to centralize
error checking, eliminate caller-side redundant checks and to improve
maintenance efficiency.
- The 3 patch series "tools/mm/page_owner_sort: fix filtering and
cleanup issues" from Yichong Chen renames is_need() to filter_record()
for clearer return semantics, fixes per-record allocation memory leaks
and bounds output copies in search_pattern() to address an existing
buffer issue.
- The 4 patch series "memcg: bail out reclaim when memcg is dying" from
Jiayuan Chen mitigates a system-wide stall which occurs when a cgroup is
removed while one of its memory control files is doing synchronous
reclaim.
- The 5 patch series "mm/memory-failure: add panic option for
unrecoverable pages" from Breno Leitao introduces an opt-in
vm.panic_on_unrecoverable_memory_failure sysctl that immediately panics
the kernel on unrecoverable memory errors in kernel-owned pages to
preserve error context and prevent delayed, silent data corruption.
- The 11 patch series "mm/damon: refactor damon_{start,stop,commit}()
for simple error handling" from SJ Park refactors the DAMON core API
functions to guarantee that all contexts are fully stopped when
damon_start(), damon_stop(), or damon_commit() fail, eliminating the
need for complex and error-prone caller-side cleanup code.
- The 5 patch series "Keep tail page private zero at free and folio
split" from Zi Yan adds checks to ensure tail_page->private is zero when
freeing compound or high-order pages and when promoting tail pages
during large folio splits. By validating these fields at free and split
time, it allows the removal of redundant private field clearing inside
prep_compound_tail().
- The 4 patch series "mm: drop redundant lru_add_drain in anon folio
reuse paths" from Barry Song eliminates redundant lru_add_drain() calls
in wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead.
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads.
- The 3 patch series "mm: clean up folio LRU and swap declarations" from
Jianyue Wu reorganizes folio LRU and swap code by relocating
page-cluster state to mm/swap_state.c, renaming mm/swap.c to mm/folio.c,
and moving MM-internal reclaim declarations into mm/internal.h.
- The 15 patch series "userfaultfd: working set tracking for VM guest
memory" from Kiryl Shutsemau adds userfaultfd support for tracking the
working set of VM guest memory, so a VMM can identify hot pages and
reclaim cold ones to tiered or remote storage.
- The 10 patch series "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part
2)" from David Hildenbrand removes the remaining pieces of
CONFIG_HAVE_BOOTMEM_INFO_NODE, performing some smaller cleanups around
freeing of reserved vmemmap pages on the way.
- The 7 patch series "mm/damon: update probe hits for runtime parameter
commits" from SJ Park ensures that DAMON's probe_hits attribute counter
is properly updated when monitoring intervals are changed at runtime,
matching the behavior of nr_accesses. To achieve this, it refactors and
renames existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- The 3 patch series "KSM: performance optimizations for rmap_walk_ksm"
from xu xin resolves a severe KSM reverse-mapping performance bottleneck
where thousands of split VMAs sharing a single anon_vma cause extended
lock contention. By adding an interval-filtering check during the rmap
walk, it reduces worst-case anon_vma lock hold times from over 500ms
down to under 2ms, preventing application freezes and latency spikes
under memory pressure.
- The 3 patch series "mm: split a couple of headers from internal.h"
from Mike Rapoport splits declarations related to mm_init, memblock,
vmalloc and sparse into new headers.
- The 2 patch series "KSM: use linear_page_index in collect_procs_ksm()"
from xu xin applies the interval tree optimization from rmap_walk_ksm()
to collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling. It hoists loop-invariant address
initialization and restricts the anon_vma_interval_tree_foreach walk to
a targeted page offset range, reducing redundant checks and improving
lookup efficiency.
- The 3 patch series "selftests/mm: avoid false failures in hugetlb and
KSM tests" from Sayali Patil fixes issues in the hugetlb and KSM MM
selftest categories that can report failures when the prerequisites for
the tests are not satisfied.
- The 19 patch series "mm/damon: introduce data attributes only
monitoring" from SJ Park introduces attribute-weighted region management
in DAMON, allowing users to prioritize specific data attributes (such as
page sizes or cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely disable
access tracking and adjust monitoring regions based on weighted
probe-hit counters to optimize monitoring quality for attribute-focused
workloads.
- The 8 patch series "mm/hmm: Add mmap lock-drop support for
userfaultfd-backed mappings" from Stanislav Kinsburskii extends
hmm_range_fault() to support userfaultfd-backed regions by allowing the
mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd regions
while preserving backward compatibility for existing callers.
- The 33 patch series "mm: make VMA page offset handling more
consistent" from Lorenzo Stoakes cleans up and standardizes how
vma->vm_pgoff is accessed and manipulated across file-backed and
anonymous mappings in the kernel.
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while renaming
rmap interval tree helpers to better reflect their functionality.
These changes establish a cleaner foundation for future work that will
unify virtual page offset indexing for all anonymous and CoW'd folios.
- The 3 patch series "mm: handle device-private PMDs in walk callbacks"
from Usama Arif addresses kernel panics and state corruption caused by
MM walk callbacks reaching non-present device-private PMD swap entries
created during HMM migrations.
It ensures that functions which acquire pmd_trans_huge_lock() properly
recognize device-private PMDs instead of assuming a present THP or a
standard migration entry.
- The 5 patch series "mm/rmap: Refactor try_to_unmap_one" from Dev Jain
refactors try_to_unmap_one by modularizing Hugetlb, anonymous-lazyfree,
and anonymous-swapbacked logic into dedicated functions, laying the
structural groundwork for batched anonymous large folio unmapping.
- The 4 patch series "Docs/ABI/damon: sysfs ABI document fixes and
additions" from Song Hu fixes typos and fills in missing entries in the
DAMON sysfs ABI document.
- The 10 patch series "dax/kmem: atomic whole-device hotplug via sysfs"
from Gregory Price introduces an atomic sysfs state attribute and
supporting DAX/MM infrastructure to prevent userland races when
offlining and removing entire memory regions.
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- The 13 patch series "mm: convert more vm_flags_t users to vma_flags_t"
from Lorenzo Stoakes continues transitioning the kernel from the
deprecated vm_flags_t type to vma_flags_t across core memory management
infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- The 2 patch series "Two small patches to clean up mm/mm_slot.h" from
xu xin refactors mm_slot.h by introducing mm_slot_remove() to unify
duplicate slot deletion sequences in khugepaged and KSM. It also adds
code documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- The 10 patch series "mm/damon/core: hide core-private struct fields"
from SJ Park cleans up DAMON core structures by consistently marking
internal-only fields with private: comment tags to prevent improper
direct access from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- The 6 patch series "mm/damon: unurgent fixes for infinite loop, NULL
de-ref and races" from SJ Park addresses potential infinite loops, NULL
dereferences, and race conditions identified in DAMON.
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- The 2 patch series "mm/page_alloc: fixes for free_pages_nolock() on
RT/UP" from Brendan Jackman fixes an NMI safety flaw in
__free_frozen_pages() where freeing pages on non-SMP or PREEMPT_RT
kernels can bypass can_spin_trylock() checks via non-PCP or isolated
migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- The 4 patch series "mm/page_alloc: couple of followups for recent
cleanups" from Brendan Jackman cleans up and updates page allocator
nomenclature, documentation, and debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete VM_BUG_ON()
assertions in allocation paths.
- The 3 patch series "mm/mseal: further cleanups" from Lorenzo Stoakes
refactors and simplifies the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO, eliminates
mm_struct parameters to enforce that sealing applies only to
current->mm, and streamlines overall logic and comments with no
functional changes intended.
- The 4 patch series "mm/vmscan: fix swappiness=max and clean up
per-node proactive reclaim" from Ridong Chen resolves reclaim behavior
bugs and cleans up function parameters across memory reclaim paths.
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead of
collapsing all failures into -EAGAIN, and removes the obsolete gfp_mask
parameter from __node_reclaim().
- The 6 patch series "mm: mincore: misc cleanups" from Kefeng Wang
cleans up and simplifies the mincore code. Most importantly, it removes
the historical special behavior that always reports VM_PFNMAP pages as
non-resident.
- The 2 patch series "mm/huge_memory: drop dead split helper variants"
from Kiryl Shutsemau implements two trivial cleanups in the folio split
API.
- The 7 patch series "mm/damon: fix uninitialized DAMOS field and kunit
exec expectation bugs" from SJ Park resolves minor operational and
testing bugs in DAMON identified by Sashiko. It initializes the
damos->last_applied field to prevent occasional efficiency degradation
and fixes invalid memory accesses in DAMON KUnit tests during test
failure handling.
- The 3 patch series "cleanup for stable_page_flags()" from Jinjiang Tu
cleans up and refactors stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- The 3 patch series "Batch unmap of uffd-wp file folios" from Dev Jain
extends batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching capabilities
to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- The 3 patch series "mm/early_ioremap: clarify and clean up
early_ioremap_reset()" from Sang-Heon Jeon clarifies and cleans up the
architecture-specific usage of __late_set_fixmap() and
__late_clear_fixmap() after early_ioremap_reset().
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset calls
in the RISC-V and ARM64 architectures.
- The 4 patch series "mm: fix reclaim storms in defrag_mode" from
Johannes Weiner addresses severe performance regressions, swap storms,
and spurious OOMs caused by vm.defrag_mode=1 under high memory pressure
in Meta production.
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- The 2 patch series "zram: lockmap tweaks" from Sebastian Siewior
optimizes and fixes lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolating lock classes across multiple instances.
It reduces memory overhead by replacing per-entry lockdep_map instances
with a single map per struct zram, and assigns a dynamic lock_class_key
to each instance to prevent false deadlock reports when different zram
devices are backed by distinct filesystems.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaoUJbQAKCRDdBJ7gKXxA
jqrzAP9WoPU0hiK4qS/kSjhtoZxhjpS5eLSUCy/utKuEvZbfGgEAu1zA+LH+X9Tm
THK5ex4iUZxiFbXpWfLMxE/Q9PmQYQ8=
=QTyb
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
||
|
|
e5c91aac49 |
sound updates for 7.3-rc1
It was a fairly busy development cycle -- the changes spread over from
the core side to leaf drivers, with lots of cleanups and enhancements.
Here we go, some highlights:
* ALSA core:
- Extension of ALSA control component list ABI
- Locking optimization and RCU conversion of ALSA sequencer core
- A few hardening fixes for UMP and sequencer core
- Drop __bitwise and __force prefix from UAPI definitions
* ASoC:
- Automatic DAI format selection code deployment across many drivers
- Sorting of register default tables to prevent ordering issues in
many drivers
- Lots of code cleanups and refactoring
- Updates in Qualcomm driver stack
- New platforms: AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson 2K0300,
Meson GX, Qualcomm LPI MI2S, SM8475, WSA855X, Realtek RT1321 VA1/2
and RT766/7
* HD-audio:
- Support for AW88399 HD-audio side codec for Lenovo Legion laptops
- Support for Hygon and Lisuan HDMI controllers
- Robustness fixes for wild device binding
- Lots of quirks/fixups: Realtek and Conexant codecs for ASUS, Lenovo,
Acer, etc
* USB-audio:
- Support for Pioneer DJ DJM-S11
- Scarlett2/FCP private URB notification fixes
- Extended quirk_flags to 64bit
- Hardening fixes for 6fire, bcd2000, usx2y
- Device-specific quirks for Mackie, Valeton, SPACETOUCH
* General:
- Auto-cleanup for put_device() and firmware loading across multiple
platforms
-----BEGIN PGP SIGNATURE-----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=kp17
-----END PGP SIGNATURE-----
Merge tag 'sound-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a fairly busy development cycle - the changes spread over from
the core side to leaf drivers, with lots of cleanups and enhancements.
Here we go, some highlights:
ALSA core:
- Extension of ALSA control component list ABI
- Locking optimization and RCU conversion of ALSA sequencer core
- A few hardening fixes for UMP and sequencer core
- Drop __bitwise and __force prefix from UAPI definitions
ASoC:
- Automatic DAI format selection code deployment across many drivers
- Sorting of register default tables to prevent ordering issues in
many drivers
- Lots of code cleanups and refactoring
- Updates in Qualcomm driver stack
- New platforms: AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson
2K0300, Meson GX, Qualcomm LPI MI2S, SM8475, WSA855X, Realtek
RT1321 VA1/2 and RT766/7
HD-audio:
- Support for AW88399 HD-audio side codec for Lenovo Legion laptops
- Support for Hygon and Lisuan HDMI controllers
- Robustness fixes for wild device binding
- Lots of quirks/fixups: Realtek and Conexant codecs for ASUS,
Lenovo, Acer, etc
USB-audio:
- Support for Pioneer DJ DJM-S11
- Scarlett2/FCP private URB notification fixes
- Extended quirk_flags to 64bit
- Hardening fixes for 6fire, bcd2000, usx2y
- Device-specific quirks for Mackie, Valeton, SPACETOUCH
General:
- Auto-cleanup for put_device() and firmware loading across multiple
platforms"
* tag 'sound-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (791 commits)
ALSA: hda: Fix connection list comparison in proc output
ALSA: docs: fix dead link to Intel HD-audio spec
ALSA: usb-audio: Add delay quirk for SPACETOUCH USB Audio
ALSA: hda: Add Lisuan HDMI controller and codec support
ALSA: hda/realtek: Fix Lenovo Yoga Slim 7 14AKP10 quirk ordering
ALSA: hda/tas2781: Add hardware stabilization delay during firmware load retries
ALSA: hda/realtek: Fix mute LED for HP Victus 15-fa1xxx (MB 8C3F)
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A515-57
ASoC: tas2783-sdw: do not treat read-only Controls as writable
ASoC: SOF: validate topology volume range before allocation
ASoC: cs35l56: Use IRQ provided by the SoundWire core
soundwire: bus_type: Create IRQ mapping before calling driver probe()
ASoC: cs35l56: Move cs35l56_irq_request() after cs35l56_irq()
ASoC: cs35l56: Request IRQ in cs35l56_common_probe()
ALSA: core: Fix use-after-free in snd_card_do_free()
ALSA: hda/realtek: Drop duplicate quirk for Lenovo 0x17aa:0x38df
ALSA: usb-audio: Rename the Audient iD14 monitor mix volume control
ASoC: tas2781: Refactor calibration start kcontrol creation to separate helper
ASoC: dt-bindings: es8316: Fix supply property constraints
ALSA: seq: midi: Serialize input teardown with event_input
...
|
||
|
|
7711f4417f |
gpio updates for v7.3-rc1
GPIO core:
- extend the gpio-regmap abstraction layer with more features allowing users
to override configuration setting, translate register values and masks and
enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by software
node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where applicable)
- with all users now converted treewide to using real firmware node links for
software node GPIO lookup: remove the deprecated label-matching mechanism
from from GPIO core
- drop redundant return value check of nonseekable_open() in gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to avoid
bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h which now
exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip
-----BEGIN PGP SIGNATURE-----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=rUDt
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
|
||
|
|
258ad62593 |
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around mod_devicetable.h and reduce resulting conflicts around includes. New device support ------------------ adi,ad3530R - Add support for the AD3532R and AD3532 16 channel DACs. adi,ad4080 - Add support for the AD4883 ADC. adi,ad5686 - Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs over SPI - Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C - Significant driver refactoring prior to these additions, partly to reduce bus traffic and to add triggered buffer and gain control support. An earlier set added support for missing supplies, reset and LDAC GPIO. adi,adf41513 - New driver to support this PLL frequency synthesizer that runs up to 26.5 GHz. - Included infrastructure to handle higher precision attributes with extensive tests adi,ltc2378-20 - New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370 LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed capture via appropriate backend and conventional triggered buffer SPI capture. invensense,icm42607 - New driver for this IMU. mediateck,mt6323 - New driver for this PMIC ADC. microchip,mcp47a1 - New driver for this I2C 6 bit DAC. nxp,mcf54415-dac - New driver for this DAC found in NXP SoCs. qst,qmc5884l - New driver for this 3 axis magnetometer. Included dt vendor entry for qst. qst,qmc6308 - New driver for this 3 axis magnetometer. sensiron,slf3s - New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW channel type. st,vl53l1x - Refactors to improve readability. ti,ads112c14 - New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring some new ABI for input chopping, particular useful for resistive sensors like thermocouples or Wheatstone bridges. - Support CRC8 detection of corruption on the bus. - Support buffered reads. ti,tmp117 - (trivial) Add support for the tmp119 temperature sensor. xilinx,versal-sysmon - New ADC driver for this block found on various FPGAs including various bus interfaces, threshold and oversampling support. dt binding updates ------------------ new shared bindings - excitation-channels and excitation-current-nanoamp allow per channel specification of currents used for resistive sensor measurement. - reference-sources property to allow selection of a per channel reference. rockchip,saradc - Add RV1106 which is compatible with the RV3588. Features -------- buffer-dmaengine - Allow cyclic buffers, useful for repeating sequence generation with DACs. devantech,dmard09 - Implement read back of channel scale - previously interface always returned an error. hid,sensors-als - Enable separate channel scaling for hardware that supports it. invensense,timestamp library - Various precision improvements. invensense,icm42600 - Add support for hwfifo watermark interfaces. taos,tcs3472 - Support wait time and sampling frequency control. Cleanups, minor fixes --------------------- Minor cleanups not mentioned at all in this summary such as white space fixes or typos. Affecting various drivers - Cleanup of conditionals that had no affect. - Drop some runtime pm local wrappers as now runtime_pm does the mark_last_busy part inside the put, these provide no useful code deduplication or readability advantages over directly calling the runtime_pm functions. - Return 0 from write_raw() on success. - Use of dev_err_probe() to simplify code and sometimes provide useful info for deferred probe debugging. - Drop some redundant error prints where the called function already provides information on errors. - Make some read only arrays in functions static. - Fix up missing handling of regcache_sync() errors. - Drop some false kernel-doc markings. - Add missing MODULE_DEVICE_TABLE for some of_match_id tables. - Use local variables for things like the struct device to shorten and improve readability of code. - Drop some unused structure elements. - Reorder dds.h macro parameters to be inline with others. - Header reorders and IWYU. Often part of a more significant series. - Remove abstractions designed to allow a driver to support multiple device types, when they have been around a long time and only the original part showed up. - Initialize spi_device_id arrays using member names following dropping of driver data from drivers that didn't actually use it. - Catch up with i2c_device_id tables added since previous effort to use named initializers for all those. - Use kernel types in a few places instead of standard C ones or bare unsigned. Misc - Update Xilinx AMS maintainer. - Update email address for Maxwell Doose. - Update email address for Siratul Islam. - Update email address for Tomasz Duszynski and re-add Tomasz to various maintainer entries. Docs - Encourage use of differential channel naming even when there is no flexibility in input to differential pair mapping. Intended to provide a strong signal to userspace that a channel is differential. adi,ad_sigma_delta - Allow COMPILE_TEST without any users. adi,ad2s1201 - Refactor trigger handler to avoid mix of guard() and goto. adi,ad5686 - Avoid potential NULL dereference is user forces a driver bind. adi,ad5696 - Add a couple of missing entries to the of_match_id table and update binding to match. atmel,ad91_adc - Use const char * for DT string property allowing a cast to be dropped. avia,hx711 - Various refactors and cleanup to enable support of additional parts (to come) - Add missing supply and gpio dt-bindings. bosch,bmc150 - Harden against device reporting too large a FIFO sample count. - Use FIELD_PREP() / FIELD_GET() to improve readability. freescale,fxls8962af - Harden against device reporting too large a FIFO sample count. hid-sensors-* - Reorder probe to not expose userspace interfaces until the rest of the setup is done to avoid potentially dropping data. honeywell,abp2030pa - Drop an unreachable return. invensens,icm45600 - Harden against bad value of FIFO sample count from device. - Use i2c_match_data if firmware table sourced match data isn't available. nxp,mpl1115 - Ensure runtime_pm is balanced on error in probe. rohm,bm1390 - Make the driver slightly more likely to recover from transient errors. sensiron,sgp30 - Handle thread creation errors. st,lsm6dsx - Update the enable mask when doing sensor fusion to avoid incorrect fifo data handling. st,stm32-dfsdm - Treat dt flags as booleans. ti,ads1015 - Switch to devm helpers which simplified code and closed a resource leak. ti,opt3001 - Split complicated opt3001_get_processed() logic into irq an no irq helper functions. - Use devm to simplify code. - Use guard() to simplify code. - Reorder probe so final call exposes userspace interfaces. - Various other more minor cleanup taos,tsl2772 - Fix calibscale readback to check right channel type. taos,tsl2583 - Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmp1Pm8RHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FoioNRAAi338gJ/xvG3rZlPr1RrTEgmsWaMqxxpr FWxFApdjAGvINn6SGwcWWkdfmB+OYg8sbhLLGkOx07e9R/GbS0y3j2kODvZHodZz k3wYXEy12HwuMgQRQWR+rNIke6bJdJFI10saJTfIRr3if7GkVvBTqd9exfoD2vGa Xzj12YN6ZcRiv8eWgju4yqQuVomMkRigd2mDHwvN4H9/ZylBRMgGIHhteWoPjx3y hs6lLeqc8lfocz1Azslb0ZEDPJ4+zPCO9eCBZ+1ZMwrzKUeqCfMYDQdE9TVUswpG aHlr5E+R2PlpLn4Ijk0faFJUZYFaOFIn3II3ZZfzzgFop2C0cVORYuIf7bgDRsaD zrLj2ybzSr/7+aAK2ry3hoVrxh9mkbv6G0Lf7bvFhQaXltJJBVQi98pU13p2AoFj BT8+pHOwgKUsF+LyxNqch6LyLDEzNw0P3Fl7SmrH/k2RVfj/L4+8PMOAijBTLpCC 3J4k17laTYWJZ8sFpyBEXYyhgp6SZqr2UIIcizrc1nIUK+mJI2/XBVbtsBY/6jW8 7RM07TNqkm+ZhsV58YiMfKdDuqPiQpCp5TYjVcxjjmOK4aE5bFSbyzi5SvAcG6oG C2l9k5vgZEpti6ZkFBj4qNUK0cVXinDWqHhlAXF7wjKCj69yEFLCtl+de//A0I+v 3FBEkBCsq+M= =4ayG -----END PGP SIGNATURE----- Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO new device support, features, cleanup for 7.3 Includes a merge of 7.2-rc2 to pick up the changes around mod_devicetable.h and reduce resulting conflicts around includes. New device support ------------------ adi,ad3530R - Add support for the AD3532R and AD3532 16 channel DACs. adi,ad4080 - Add support for the AD4883 ADC. adi,ad5686 - Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs over SPI - Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C - Significant driver refactoring prior to these additions, partly to reduce bus traffic and to add triggered buffer and gain control support. An earlier set added support for missing supplies, reset and LDAC GPIO. adi,adf41513 - New driver to support this PLL frequency synthesizer that runs up to 26.5 GHz. - Included infrastructure to handle higher precision attributes with extensive tests adi,ltc2378-20 - New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370 LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed capture via appropriate backend and conventional triggered buffer SPI capture. invensense,icm42607 - New driver for this IMU. mediateck,mt6323 - New driver for this PMIC ADC. microchip,mcp47a1 - New driver for this I2C 6 bit DAC. nxp,mcf54415-dac - New driver for this DAC found in NXP SoCs. qst,qmc5884l - New driver for this 3 axis magnetometer. Included dt vendor entry for qst. qst,qmc6308 - New driver for this 3 axis magnetometer. sensiron,slf3s - New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW channel type. st,vl53l1x - Refactors to improve readability. ti,ads112c14 - New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring some new ABI for input chopping, particular useful for resistive sensors like thermocouples or Wheatstone bridges. - Support CRC8 detection of corruption on the bus. - Support buffered reads. ti,tmp117 - (trivial) Add support for the tmp119 temperature sensor. xilinx,versal-sysmon - New ADC driver for this block found on various FPGAs including various bus interfaces, threshold and oversampling support. dt binding updates ------------------ new shared bindings - excitation-channels and excitation-current-nanoamp allow per channel specification of currents used for resistive sensor measurement. - reference-sources property to allow selection of a per channel reference. rockchip,saradc - Add RV1106 which is compatible with the RV3588. Features -------- buffer-dmaengine - Allow cyclic buffers, useful for repeating sequence generation with DACs. devantech,dmard09 - Implement read back of channel scale - previously interface always returned an error. hid,sensors-als - Enable separate channel scaling for hardware that supports it. invensense,timestamp library - Various precision improvements. invensense,icm42600 - Add support for hwfifo watermark interfaces. taos,tcs3472 - Support wait time and sampling frequency control. Cleanups, minor fixes --------------------- Minor cleanups not mentioned at all in this summary such as white space fixes or typos. Affecting various drivers - Cleanup of conditionals that had no affect. - Drop some runtime pm local wrappers as now runtime_pm does the mark_last_busy part inside the put, these provide no useful code deduplication or readability advantages over directly calling the runtime_pm functions. - Return 0 from write_raw() on success. - Use of dev_err_probe() to simplify code and sometimes provide useful info for deferred probe debugging. - Drop some redundant error prints where the called function already provides information on errors. - Make some read only arrays in functions static. - Fix up missing handling of regcache_sync() errors. - Drop some false kernel-doc markings. - Add missing MODULE_DEVICE_TABLE for some of_match_id tables. - Use local variables for things like the struct device to shorten and improve readability of code. - Drop some unused structure elements. - Reorder dds.h macro parameters to be inline with others. - Header reorders and IWYU. Often part of a more significant series. - Remove abstractions designed to allow a driver to support multiple device types, when they have been around a long time and only the original part showed up. - Initialize spi_device_id arrays using member names following dropping of driver data from drivers that didn't actually use it. - Catch up with i2c_device_id tables added since previous effort to use named initializers for all those. - Use kernel types in a few places instead of standard C ones or bare unsigned. Misc - Update Xilinx AMS maintainer. - Update email address for Maxwell Doose. - Update email address for Siratul Islam. - Update email address for Tomasz Duszynski and re-add Tomasz to various maintainer entries. Docs - Encourage use of differential channel naming even when there is no flexibility in input to differential pair mapping. Intended to provide a strong signal to userspace that a channel is differential. adi,ad_sigma_delta - Allow COMPILE_TEST without any users. adi,ad2s1201 - Refactor trigger handler to avoid mix of guard() and goto. adi,ad5686 - Avoid potential NULL dereference is user forces a driver bind. adi,ad5696 - Add a couple of missing entries to the of_match_id table and update binding to match. atmel,ad91_adc - Use const char * for DT string property allowing a cast to be dropped. avia,hx711 - Various refactors and cleanup to enable support of additional parts (to come) - Add missing supply and gpio dt-bindings. bosch,bmc150 - Harden against device reporting too large a FIFO sample count. - Use FIELD_PREP() / FIELD_GET() to improve readability. freescale,fxls8962af - Harden against device reporting too large a FIFO sample count. hid-sensors-* - Reorder probe to not expose userspace interfaces until the rest of the setup is done to avoid potentially dropping data. honeywell,abp2030pa - Drop an unreachable return. invensens,icm45600 - Harden against bad value of FIFO sample count from device. - Use i2c_match_data if firmware table sourced match data isn't available. nxp,mpl1115 - Ensure runtime_pm is balanced on error in probe. rohm,bm1390 - Make the driver slightly more likely to recover from transient errors. sensiron,sgp30 - Handle thread creation errors. st,lsm6dsx - Update the enable mask when doing sensor fusion to avoid incorrect fifo data handling. st,stm32-dfsdm - Treat dt flags as booleans. ti,ads1015 - Switch to devm helpers which simplified code and closed a resource leak. ti,opt3001 - Split complicated opt3001_get_processed() logic into irq an no irq helper functions. - Use devm to simplify code. - Use guard() to simplify code. - Reorder probe so final call exposes userspace interfaces. - Various other more minor cleanup taos,tsl2772 - Fix calibscale readback to check right channel type. taos,tsl2583 - Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents. * tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits) iio: dac: mcp47a1: add support for new device dt-bindings: iio: dac: add support for mcp47a1 iio: Update email for Maxwell Doose iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion iio: light: cm32181: return zero after writing calibscale iio: flow: add Sensirion SLF3S liquid flow sensor driver iio: core: add IIO_VAL_DECIMAL64_FEMTO format type dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor iio: types: add IIO_VOLUMEFLOW channel type iio: ABI: Encourage differential voltage ABI usage iio: adc: ltc2378: Add support for LTC2338-18 iio: adc: ltc2378: Enable triggered buffer data capture iio: adc: ltc2378: Enable high-speed data capture iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs dt-bindings: iio: adc: Add ltc2378 iio: magnetometer: ak8974: remove conditional return with no effect iio: light: tsl2583: remove conditional return with no effect iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper ... |
||
|
|
3b4128b9f3 |
Timers and timekeeping core updates:
- Fix a subtly inconsistency in the timekeeping code, which fails to
account for the monotonicity adjustment in ntp_error. For small changes
of the clocksource multiplicator (+/-1) which are typically used by the
NTP PLL this is hardly to observe. But for larger adjustments,
e.g. caused by a direct frequency setting through adjtimex() the
one-time uncompensated offset is significant.
Cure this by adjusting ntp_error with the resulting offset so that the
discrepancy is smoothed away over time
- Make tick length calculations correct in NTP. The timekeeping core
takes the quantisation of the clocksource into account when calculating
the tick length to compensate for the deviation of the nominal
NTP_INTERVAL_LENGTH. While timekeeping gets this right, NTP is not
aware of that, which means it operates on the nominal value and not on
the actual value which is determined by the clock source frequency. The
rounding of a coarse clocksource like the ACPI PM timer results in a
+127 PPM deviation.
Cure this by exposing the deviation to the NTP code so that it can
operate on the same data as the timekeeping core. This is purely kernel
internal. User space still sees the nominal tick lenght via adjtimex().
- The accuracy of the NTP adjustments is fairly approximate as the code
assumes that the invocations are precisely in NTP interval frequency
ticks and the final adjustment can over and under-run.
Cure this by adjusting ntp_error by the intended skew on each tick to
achieve the desired rate.
- Handle the two competing skews of time offset and time adjustment
correctly by calculating the conflict portion between the skews and
adjusting both accordingly.
- A set of updates and improvements for the selftests
- The usual small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=prJt
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and timekeeping core updates from Thomas Gleixner:
- Fix a subtly inconsistency in the timekeeping code, which fails to
account for the monotonicity adjustment in ntp_error.
For small changes of the clocksource multiplicator (+/-1) which are
typically used by the NTP PLL this is hard to observe. But for larger
adjustments, e.g. caused by a direct frequency setting through
adjtimex() the one-time uncompensated offset is significant.
Cure this by adjusting ntp_error with the resulting offset so that
the discrepancy is smoothed away over time
- Make tick length calculations correct in NTP.
The timekeeping core takes the quantisation of the clocksource into
account when calculating the tick length to compensate for the
deviation of the nominal NTP_INTERVAL_LENGTH.
While timekeeping gets this right, NTP is not aware of that, which
means it operates on the nominal value and not on the actual value
which is determined by the clock source frequency. The rounding of a
coarse clocksource like the ACPI PM timer results in a +127 PPM
deviation.
Cure this by exposing the deviation to the NTP code so that it can
operate on the same data as the timekeeping core. This is purely
kernel internal. User space still sees the nominal tick lenght via
adjtimex().
- The accuracy of the NTP adjustments is fairly approximate as the code
assumes that the invocations are precisely in NTP interval frequency
ticks and the final adjustment can over and under-run.
Cure this by adjusting ntp_error by the intended skew on each tick to
achieve the desired rate.
- Handle the two competing skews of time offset and time adjustment
correctly by calculating the conflict portion between the skews and
adjusting both accordingly.
- A set of updates and improvements for the selftests
- The usual small fixes and improvements all over the place
* tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
selftests: timers: nsleep-lat: Check all calls to clock_nanosleep() and clock_gettime()
selftests: timers: nsleep-lat: Reuse kselftest error numbers
selftests: timers: nsleep-lat: Explicitly list the tested clocks
selftests: timers: nsleep-lat: Use NSEC_PER_MSEC define for unreasonable latency
selftests: timers: nanosleep: Report each test separately
selftests: timers: nanosleep: Explicitly handle timer_delete() failure
selftests: timers: nanosleep: Move all single clock tests out of the loop in main()
selftests: timers: nanosleep: Reuse kselftest error numbers
selftests: timers: nanosleep: Explicitly list the tested clocks
selftests: timers: nanosleep: Drop output alignment
selftests: timers: Use clock_name() and constants from clock-helpers.h
selftests: Add clock-helpers.h
timer_list: Use ktime_t over nanoseconds
timer_list: Use standard 'long long' format placeholders
hrtimer: Add a lockdep assertion to hrtimer_update_base()
timekeeping: Use u32 for clock_was_set_seq
timekeeping: Rename clockid_aux_valid() to clockid_is_aux_clock()
hrtimer: Account nr_retries on recovered interrupt retries
timers/itimer: Zero-init old itimerval before copy to userspace
nohz: Replace dead select with choice default
...
|
||
|
|
146cc263e4 |
Linux 7.2
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmqCLGoeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJzYH/0SFjcgnk1Z3Km+3 2kEeGAMETajW41W7+5QQkuHk83UXDxigDRoD857/d8utK90GrZAoTMS9/6zF3tra ht4G1yc2x7/xgVLkWii54d/sp1LEWTRDntN95fzYZwbeAXwd0AcYBlKXZYHKl4t/ 4yZCgYPmYTkewaYdbyWNPiZvCwhBUl5k1E9i/drh5IJXdgXRcqoO86FY9JX+Ks9x r0g+d6RIiSbDfwzgRpkBn0TRnqzh2OeBfgyrsgGZO2axwlKcA7SP0vwwT6c6nOUI s8F2xXrqrUI75JbSI4YbdwOSvktwbtkz83idlRAYBOdxof3LJ6i2YaxrT8iG+KUH l7+e18M= =eQMh -----END PGP SIGNATURE----- Merge tag 'v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next Linux 7.2 |
||
|
|
c139e7e44f |
ALSA: hda: Fix connection list comparison in proc output
print_conn_list() compares the raw hardware connection list with the
connection list cached by the HDA driver. When they differ, it prints an
additional "In-driver Connection" line so that /proc/asound/card*/codec#*
shows the topology actually used by the driver.
The comparison currently passes conn_len directly to memcmp(). However,
conn_len is a number of connection-list entries, while memcmp() expects a
size in bytes. Both list and conn are arrays of hda_nid_t, which is u16,
so only half of the connection data is compared.
For example, for two-entry lists such as:
hardware: 0x0c 0x0d
cached: 0x0c 0x0e
conn_len is 2, and the current comparison checks only the first hda_nid_t.
The lists are therefore incorrectly treated as identical even though the
second connection differs.
This can happen legitimately when codec fixups replace a cached connection
list with snd_hda_override_conn_list(). The codec routing used by the
driver is not affected, but the proc output can hide the overridden
driver-visible routing and provide misleading topology information during
codec debugging.
Convert the entry count to a byte size so that memcmp() covers the
complete connection list.
Fixes:
|
||
|
|
b2b82ce147 |
ASoC: Updates for v7.3
A very busy release, a combination of a lot of new device work and more
people than usual doing various subsystem wide improvements in the code.
The main subsystem level change is the work Morimoto-san has been doing
to get automatic DAI format selection more widely deployed, and even
that is largely changes in the drivers to enable use of the feature
rather than framework work.
- Conversions of a lot of drivers to use the automatic DAI format
selection code from Morimoto-san.
- Many fixes and code improvements from bui duc phuc and Morimoto-san.
- Fixes for ordering problems in register default tables from Peter
Ujfalusi.
- Changes to use auto-cleanup for firmware to improve robustness from
Takashi Iwai.
- Support for firmware on more Awinc devices.
- Many changes in the Qualcomm driver stack, mostly around new platform
support.
- Support for AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson 2K0300,
Meson GX formatter and interface, Qualcomm LPI MI2S, SM8475 and
WSA855 and Realtek RT1321 VA1/2 and RT766/7.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmqDIPkACgkQJNaLcl1U
h9BOVgf/SMQ3h9+jUQhtPSODZrUn3ke8e70gAchWM0vZeqjV78eLVXNvOYDoKHnS
nM3LAc4uMclXBXT8nV9JPBdCg3Pw1S26Dvuuqttcta7bwcZ/2cDzB3N3IA7dD8Rj
vICECoTNep/hhdchsiO7swU3If6HnRgjX2B6C9XwkoZSrCQZ5KidjtZUGXYgIvQK
pB5qTvtGVvTGINmb6QsqXRBfXsgvOPcNHECSkOHkhLPCQb+YbGzOMDrSMcELl9db
xGL3I+n/n6mjANxxjZfzNLWqV1xdHlJeODXC8Z1bQofOFGzSBR+1FGEzbvC/cDh4
VsrG4+gBd3mvE1xxodTaYKQH4RxaKw==
=RMbR
-----END PGP SIGNATURE-----
Merge tag 'asoc-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.3
A very busy release, a combination of a lot of new device work and more
people than usual doing various subsystem wide improvements in the code.
The main subsystem level change is the work Morimoto-san has been doing
to get automatic DAI format selection more widely deployed, and even
that is largely changes in the drivers to enable use of the feature
rather than framework work.
- Conversions of a lot of drivers to use the automatic DAI format
selection code from Morimoto-san.
- Many fixes and code improvements from bui duc phuc and Morimoto-san.
- Fixes for ordering problems in register default tables from Peter
Ujfalusi.
- Changes to use auto-cleanup for firmware to improve robustness from
Takashi Iwai.
- Support for firmware on more Awinc devices.
- Many changes in the Qualcomm driver stack, mostly around new platform
support.
- Support for AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson 2K0300,
Meson GX formatter and interface, Qualcomm LPI MI2S, SM8475 and
WSA855 and Realtek RT1321 VA1/2 and RT766/7.
|
||
|
|
19eadf550b |
ALSA: usb-audio: Add delay quirk for SPACETOUCH USB Audio
Audio control requests that set sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem. usb 1-1: New USB device found, idVendor=0666, idProduct=0880 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: USB Audio usb 1-1: Manufacturer: SPACETOUCH usb 1-1: SerialNumber: 000000000 Signed-off-by: Lianqin Hu <hulianqin@vivo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/TYUPR06MB6217D93F595D9995413C9721D2A72@TYUPR06MB6217.apcprd06.prod.outlook.com |
||
|
|
ceaebef91d |
ALSA: hda: Add Lisuan HDMI controller and codec support
Lisuan GPUs expose an HD-audio controller at PCI ID 4c54:5010 and an HDMI/DP codec with codec ID 0x4c545020. Neither ID is currently matched by the HDA stack, leaving HDMI/DP audio unavailable on these devices. The existing downstream support uses the generic HDMI codec path and attaches no Lisuan-specific capability flags to the controller. Its dedicated AZX driver type only changes the short driver name. Use the corresponding generic upstream paths instead: bind 4c54:5010 to AZX_DRIVER_GENERIC, register 0x4c545020 as MODEL_GENERIC, and add the Lisuan codec vendor name. This keeps the enablement minimal and avoids a vendor-only AZX driver type with no vendor-specific behavior. Signed-off-by: Xu Rao <raoxu@uniontech.com> Link: https://patch.msgid.link/DE1B62191D573D37+20260817085531.992573-1-raoxu@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
|
75dc2eda65 |
ALSA: hda/realtek: Fix Lenovo Yoga Slim 7 14AKP10 quirk ordering
The Yoga Slim 7 14AKP10 has a PCI SSID of 17aa:38b4 but a codec SSID of 17aa:391a. The current quirk table contains a PCI quirk for 17aa:38b4 (for the Legion Slim 7 16IRH8) which matches first, so the codec-specific quirk for 17aa:391a is never applied. This results in the wrong fixup being used (CS35L41_I2C_2 instead of the correct bass speaker fixup), leaving the internal speakers misconfigured or silent. Remove the 17aa:391a entry from its PCI-SSID-sorted position and add it as an HDA_CODEC_QUIRK directly before the 17aa:38b4 entry, because it must match on the codec subsystem ID rather than the PCI SSID and it has to win over the colliding PCI quirk for the Legion Slim 7 16IRH8. A comment is added to explain the out-of-order placement, following the same style already used for the 17aa:38bb and 17aa:38f9 codec-SSID overrides. With this change, the correct ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN is applied, restoring speaker output and auto-mute functionality. The original quirk added in commit |
||
|
|
f6635d64e7 |
ALSA: hda/tas2781: Add hardware stabilization delay during firmware load retries
During runtime resume transitions, loading calibration data blocks to the tas2781 amplifier may intermittently trigger transmission failures or block checksum mismatches (-EAGAIN) due to un-stabilized power rails or I2C bus glitches. The loop in tasdev_load_blk() decrements block->nr_retry and attempts an immediate re-transmission upon receiving -EAGAIN. However, without any inter-retry delay, all available retry slots are exhausted within less than a microsecond—long before the hardware can physically settle. This leads to permanent "ERROR_PRAM_CRCCHK" deadlocks and silent speakers on modern laptops after resuming media. Fix this cleanly by introducing a 2ms usleep_range() delay directly inside the tasdev_load_blk() retry paths prior to each 'continue' statement. This grants the chip sufficient time to stabilize before the next transmission attempt without introducing unnecessary latency on final failures. Signed-off-by: Zeliang Li <lizeliang.linux@gmail.com> Link: https://patch.msgid.link/20260815-master-v2-1-b4ea03c8b59e@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
|
19b02fecd8 |
ALSA: hda/realtek: Fix mute LED for HP Victus 15-fa1xxx (MB 8C3F)
The HP Victus 15-fa1xxx with motherboard 8C3F is missing the existing mute LED quirk for ALC245 codecs. Add the 103c:8c3f subsystem ID to the existing ALC245_FIXUP_HP_MUTE_LED_COEFBIT quirk. Tested on HP Victus 15-fa1xxx (MB 8C3F). The mute LED works as intended. Signed-off-by: Yashraj Ghule <yashrajghule.221@gmail.com> Link: https://patch.msgid.link/20260816110655.11592-1-yashrajghule.221@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
|
317ea3b870 |
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A515-57
The Acer Aspire A515-57 with subsystem ID 1025:1616 and Realtek ALC256 uses GPIO2 (0x04) for the microphone mute LED. Without a quirk, the GPIO mask and direction are not configured and the LED does not follow the microphone mute state. Reuse ALC256_FIXUP_ACER_SFG16_MICMUTE_LED, which configures GPIO2 as the microphone mute LED. Tested on an Acer Aspire A515-57 with ALC256 (10ec:0256, subsystem 1025:1616). GPIO mask and direction are 0x04 and GPIO data switches between 0x00 and 0x04; the LED device is registered and follows the microphone mute state. Signed-off-by: Giulio Gualtierotti <ggualtierotti.dev@mailbox.org> Link: https://patch.msgid.link/20260816094223.36617-1-ggualtierotti.dev@mailbox.org Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
|
692719a9d4 | Merge branch 'for-next' into for-linus | ||
|
|
0c7aeb0f5e |
ASoC: tas2783-sdw: do not treat read-only Controls as writable
The regmap has no writeable_reg callback, so regmap considers every register up to max_register writable. That includes the read-only SDCA Controls the driver itself describes: the Latency of every Entity, the Clock Valid of every Clock Source, the actual power state of the Power Domain Entity, the protection status, the algorithm ready flag and the Extension Unit id and version. Most of them are also listed in tas2783_reg_default[] with a placeholder of zero, even though a default for, say, a latency reading is meaningless. Reading such a Control caches its real value, which no longer matches the placeholder, so regcache_sync() then tries to write it back. The peripheral rejects the transaction with -ENODATA and the sync aborts, leaving the rest of the cache unrestored. Add a writeable_reg callback that refuses the read-only Controls and otherwise keeps the previous behaviour. Every selector it lists is the read-only Control of its Entity type in sdca_function.h, and none of the Controls the driver writes is affected: the requested power state, the mutes, the Cluster Index, the protection mode, the algorithm enable and the file download Controls all stay writable. The list is static because the BIOS on the affected machines describes no Smart Amp SDCA function, so the driver runs its fallback tables and sdca_regmap_writeable() is not available to it. It would be good to have the list confirmed against the hardware documentation, and to know whether the read-only Controls belong in tas2783_reg_default[] at all. Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com> Link: https://patch.msgid.link/20260814094000.22118-2-andrey.golovko@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
a698e4a60f |
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table.
Fixes:
|
||
|
|
ac47e22fcf |
ASoC: cs35l56: Switch to using the IRQ from the SoundWire core
Richard Fitzgerald <rf@opensource.cirrus.com> says: At the time the cs35l56 driver was written the only way to get interrupts from the SoundWire core was to implement a custom handler inside the interrupt_callback() function. The SoundWire core now provides a virtual IRQ for notifying ImpDef interrupts, and switching to this simplifies the code and also makes it more similar to the normal interrupt handling of I2C/SPI (though some SoundWire specials are still needed). Patches #1 and #2 do some preparatory code shuffling so that there is less clutter in patch #4. Patch #3 changes the SoundWire core code to create the virtual ImpDef IRQ before calling the codec drive probe() so that the IRQ can be requested in probe(). Link: https://patch.msgid.link/20260810104045.60701-1-rf@opensource.cirrus.com |
||
|
|
243ca1fb53 |
ASoC: cs35l56: Use IRQ provided by the SoundWire core
Replace the custom SoundWire IRQ handling with the generic nested IRQ provided by the SoundWire core. This removes the local IRQ work function and the convoluted IRQ masking and pm_runtime management around it. We still need the local functions to mask/disable and unmask/enable the SoundWire interrupts because the devices handled by the cs35l56 driver don't have the generic mask bit for the ImpDef1 interrupt so masking and unmasking has to use a custom mask bit. cs35l56_sdw_remove() doesn't need to call cs35l56_disable_sdw_interrupts() now that there isn't a local work function to be flushed. It only masks the custom interrupt mask bit and the rest of the handler cleanup will be done the normal way by devm_free_irq() in cs35l56_remove(). Similar applies to cs35l56_sdw_system_suspend() - it is enough to write the custom mask bits. cs35l56_irq() doesn't need to be exported because cs35l56_sdw.c isn't calling it. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260810104045.60701-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
a075fef187 |
ASoC: cs35l56: Move cs35l56_irq_request() after cs35l56_irq()
cs35l56_irq_request() references cs35l56_irq() but was above it in the source (although they are in the other order in the header file). Switch to convertional C ordering. This is preparation for a future patch that will stop exporting cs35l56_irq() and make it static. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260810104045.60701-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
888162dabf |
ASoC: cs35l56: Request IRQ in cs35l56_common_probe()
Call cs35l56_irq_request() in cs35l56_common_probe() instead of calling it afterwards in the probe() for each bus type. Calling cs35l56_irq_request() in each bus probe() is a legacy of dealing with the oddities of the SoundWire framework. It's no longer serving any useful purpose to do it outside of the main cs35l56_common_probe(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260810104045.60701-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
5ae1a690c5 |
ALSA: core: Fix use-after-free in snd_card_do_free()
A use-after-free was detected in snd_card_do_free() when a sound card
managed by devres is unbound while a user-space application still holds an
open file descriptor.
For managed cards, the memory is allocated using devres_alloc(), and its
release function is set to __snd_card_release(), which calls
snd_card_free(). When the device is unbound, the unbind thread calls
snd_card_free(), which drops a reference to the card's device. If the user
thread still has an open file descriptor, the reference count does not
reach zero, and the unbind thread blocks on wait_for_completion(&released).
When the user thread closes the file descriptor, it drops the final
reference, invoking the device release callback release_card_device(),
which calls snd_card_do_free(). snd_card_do_free() performs cleanup and
calls complete(card->release_completion). This wakes up the unbind thread,
which returns from snd_card_free() and __snd_card_release(). The devres
core then immediately frees the memory block containing the snd_card
structure.
Meanwhile, the user thread continues execution in snd_card_do_free() and
evaluates `if (!card->managed)`. It reads the `managed` boolean from the
snd_card structure that was just freed by the unbind thread, triggering a
KASAN use-after-free.
Fix this by caching the value of card->managed in a local variable before
calling complete(). This ensures that the card pointer is not dereferenced
after the unbind thread has been woken up and potentially freed the card.
BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604
[inline]
BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0
sound/core/init.c:153
Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
snd_card_do_free sound/core/init.c:604 [inline]
release_card_device+0x1ab/0x1b0 sound/core/init.c:153
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
snd_card_file_remove+0x331/0x390 sound/core/init.c:1125
snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986
__fput+0x418/0xa50 fs/file_table.c:512
fput_close_sync+0x11f/0x240 fs/file_table.c:617
__do_sys_close fs/open.c:1511 [inline]
__se_sys_close fs/open.c:1496 [inline]
__x64_sys_close+0x7e/0x110 fs/open.c:1496
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fixes:
|
||
|
|
e5b03754d2 |
ALSA: hda/realtek: Drop duplicate quirk for Lenovo 0x17aa:0x38df
The PCI SSID 17aa:38df is listed twice in alc269_fixup_tbl[], both mapping
to the same fixup ALC287_FIXUP_TAS2781_I2C:
SND_PCI_QUIRK(0x17aa, 0x38df, "Yoga Y990 Intel YC Dual", ALC287_FIXUP_TAS2781_I2C),
...
SND_PCI_QUIRK(0x17aa, 0x38df, "Y990 YG DUAL", ALC287_FIXUP_TAS2781_I2C),
The HDA quirk lookup (hda_quirk_lookup_id()) returns the first matching
entry, so the second occurrence never takes effect; it is dead code.
Drop the second entry. The retained "Yoga Y990 Intel YC Dual" label also
follows the naming of the neighbouring 0x38e0 entry ("Yoga Y990 Intel VECO
Dual").
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260814084101.504471-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
||
|
|
9c0564fcc2 |
ALSA: usb-audio: Rename the Audient iD14 monitor mix volume control
On the Audient iD14 (2708:0008), feature unit 12 is traced through to
the Speaker output terminal and is therefore exported as "Speaker
Playback Volume". The name fits it badly. It advertises Volume on
only four of its six logical channels, which the driver records as
cmask=0xf, channels=4 on a 6-channel playback stream, and it sits on
the monitor mixer branch rather than in the direct playback path:
INPUT_TERMINAL 2 (USB streaming, 6ch) -> EXTENSION_UNIT 51 ->
FEATURE_UNIT 10 (no controls) -> OUTPUT_TERMINAL 20 (Speaker)
while FU 12 hangs off MIXER_UNIT 60 and feeds back into
EXTENSION_UNIT 51.
Userspace adopts the control as the stream's hardware playback volume,
so any setting below 0 dB attenuates part of the stream and not the
rest. Measured over the device's own digital loopback, with one
-12 dBFS tone per channel played straight to hw:, PCM channel 0 is
unaffected while channel 1 tracks the control: at 107/127 (-20 dB) the
two read -15.89 and -35.89 dBFS, a 20.00 dB imbalance, and at 127/127
both read -15.89 dBFS.
Give the unit a non-standard name so that it is no longer taken for
the stream's master volume. Dropping the control instead also fixes
the imbalance, but FU 12 keeps its value across a module reload, so
dropping it strands a device that is already attenuated with nothing
able to reset it. Renaming leaves the monitor gain reachable and that
recovery path intact.
The mapped name ends in "Playback" because a name from the map
suppresses the automatic " Playback" but still gets " Volume"
appended; the control comes out as "Monitor Mix Playback Volume".
Tested on the ACP path with PipeWire, which is where the problem
reproduces: the control now stays at 127 at every volume setting and
the imbalance is 0.00 dB, and setting it by hand to 107 and back to
127 gives 20.00 dB and 0.00 dB as before.
Link: https://lore.kernel.org/linux-sound/0102019fed22f9d3-fa294ec5-02f1-4fd3-b3fa-76efc14331cc-000000@eu-west-1.amazonses.com/T/#u
Signed-off-by: Neil Andrews <neil@androos.io>
Link: https://patch.msgid.link/0102019ffcdbb1e6-9b59d3cc-ef05-4df1-8f9f-fb2f425bcda2-000000@eu-west-1.amazonses.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
||
|
|
ba5401135a |
ASoC: tas2781: Refactor calibration start kcontrol creation to separate helper
Move the tas2781-specific calibration start kcontrol initialization logic out of tasdevice_create_cali_ctrls() into a new dedicated helper function create_tas2781_cali_start_ktrl(). This change eliminates duplicate inline code in the main calibration control registration routine, improves code readability, and makes further extension for custom calibration parameters much easier. No functional behavior changes. Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> Link: https://patch.msgid.link/20260813080540.1030-1-shenghao-ding@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
403f7f3ad3 |
ALSA: seq: midi: Serialize input teardown with event_input
snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event leaving it running after rawmidi_release_priv() has set rfile->rmidi to NULL which leads to: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0 Call trace: snd_midi_input_event+0x3c/0x134 [snd_seq_midi] (P) snd_rawmidi_input_event_work+0x1c/0x2c process_one_work+0x150/0x3a4 worker_thread+0x190/0x318 Apply a similar approach to commit |
||
|
|
9895573b01 |
ALSA: hda/intel: Add sanity check for BAR0 size
The recent reports from syzkaller showed that we can bind any wild PCI device to HD-audio controller, and if PCI BAR of the device is too small, it may lead to a crash, as the driver believes as if the full register range were accessible. For avoiding such a problem, add a safeguard before the actual probe to check the available BAR0 size. Note that the threshold (0x200) is chosen to cover all needed registers at probing. But this doesn't mean that it would cover fully for all features including the extended ones. Reported-by: syzbot+10cd2d1efe8eeb604bee@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=10cd2d1efe8eeb604bee Reported-by: syzbot+5ebe7cd17e48b4293660@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5ebe7cd17e48b4293660 Link: https://patch.msgid.link/20260813150354.763502-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
|
4cc25cdd3c |
ALSA: seq: midi: Optimize event_input locking with RCU
The recent fix for serializing the output teardown introduced a
spinlock invocation at every MIDI output event via event_process_midi.
Since this is a hot path, let's do performance optimization with RCU.
The new output_substream __rcu pointer is published via
rcu_assign_pointer() in midisynth_use() after output_rfile is set, and
cleared in midisynth_unuse() before the resource teardown.
event_process_midi() reads it under rcu_read_lock() and bumps
output_use_lock inside that section, which is necessary to close the
window between the pointer dereference and the refcount increment.
midisynth_unuse() calls synchronize_rcu() before snd_use_lock_sync():
this guarantees that any reader who obtained a non-NULL pointer has
already called atomic_inc (output_use_lock), so the subsequent
snd_use_lock_sync() sees the correct in-flight count.
Fixes:
|
||
|
|
0196c4b4f8 |
ASoC: amd: acp: pass audio_drv_data to dma_irq_handler
The IRQ handler only needs the audio_drv_data, so pass it directly as the request_irq argument instead of the device pointer and a dev_get_drvdata() lookup. Assisted-by: opencode:deepseek-v4-flash-free Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20260811041925.25016-1-rosenp@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
802ff936c7 |
ASoC: fsl-asoc-card: Restructure to support deferrable card binding
Chancel Liu <chancel.liu@nxp.com> says: The ASoC core has evolved over several kernel releases to support deferrable card binding: when a component is not yet available, devm_snd_soc_register_card() no longer propagates -EPROBE_DEFER back to the machine driver. Instead the card is placed on an internal deferred list and rebound automatically once the missing component registers. As a result, registering a sound card no longer guarantees that all CPU and codec components have already probed successfully. This exposed two regressions in fsl-asoc-card: 1. The machine driver caches codec MCLK rate during probe(). On platforms where the MCLK is derived from the CPU DAI clock and its final rate is applied via assigned-clocks in the CPU DAI node, probing before the CPU DAI driver completes leaves fsl-asoc-card with a stale mclk_freq. 2. If a card defers due to a missing component, it queues the card onto the unbind_card_list and returns 0. The driver then proceeds to call simple_util_init_jack(). At this point, the snd_card pointer is NULL. Patch 1 drops mclk management for nau8822 from this machine driver. Patch 2 is a pure refactoring with no functional change. the large if/else chain of of_device_is_compatible() calls in probe() is replaced by a platform data table approach. Patch 3 moves all component-dependent initialisation and jacks out of probe() and into late_probe(), which is the correct place under the deferrable binding model. Link: https://patch.msgid.link/20260810093834.1511749-1-chancel.liu@oss.nxp.com |
||
|
|
de27e0cadc |
ASoC: fsl-asoc-card: Move bound-component setup to late_probe
Move all operations that require bound codec and CPU DAI components out of probe() and into late_probe(), which is the correct place for them now that ASoC supports deferrable card binding. late_probe() may be called multiple times after an unbind/rebind cycle, so every initialization step is guarded accordingly. Three new helpers are introduced: - fsl_asoc_card_init_cpu() CPU DAI-specific setup. Previously done in probe() while CPU DAI component maybe not ready. - fsl_asoc_card_init_codecs() Reads codec MCLK rates from the bound component devices, invokes the per-compatible pdata->codec_init callback if present. - fsl_asoc_card_init_jack() Registers headphone and microphone jacks. The call site of codec_init callbacks moves from probe() to fsl_asoc_card_init_codecs(), which runs in late_probe() after the bound codec device is known. This makes sure codecs can get proper MCLK. The old card-name fallback depended on codec_dev_name[], which required looking up the codec device in probe(). This is no longer valid under deferrable card binding because the codec component may not have probed yet. Since the DT binding requires "model", remove the fallback and fail with a clear error. Assisted-by: VeroCoder:claude-sonnet-4-6 Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Link: https://patch.msgid.link/20260810093834.1511749-4-chancel.liu@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
76408e27e6 |
ASoC: fsl-asoc-card: Move static compatible data to platform data
Replace the large if/else chain of of_device_is_compatible() calls in probe() with a table-driven approach. Each compatible string now has a corresponding static const struct fsl_asoc_card_pdata descriptor stored in the of_device_id .data field. probe() calls of_device_get_match_data() once and reads all per-compatible configuration from the returned pointer: - DAI format - CPU SYSCLK direction and ratio overrides - TDM slot width - Codec DAI name, MCLK id, FLL/PLL ids, PLL S24 ratio - playback_only / capture_only direction restrictions - Default DAPM route table - Excluded PCM format mask (for SAI + WM8960/WM8962) - Optional probe_init callback (SPDIF multi-codec discovery) - Optional codec_init callback (codec-specific post-probe logic) This patch is a pure refactoring, no functional change is intended. Assisted-by: VeroCoder:claude-sonnet-4-6 Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Link: https://patch.msgid.link/20260810093834.1511749-3-chancel.liu@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
4c51a83a4f |
ASoC: fsl-asoc-card: Drop mclk management for nau8822
commit |
||
|
|
87331e2aa4 |
ASoC: rockchip: Simplify probe error handling
bui duc phuc <phucduc.bui@gmail.com> says: This series simplifies probe error handling across Rockchip ASoC drivers. It replaces open-coded error handling with dev_err_probe() where appropriate, removes redundant probe error messages, returns the original error code directly, and fixes handling of -EPROBE_DEFER returned by platform_get_irq_optional() in the Rockchip SAI driver and devm_pinctrl_get() in the Rockchip I2S driver. Compile tested only. Link: https://patch.msgid.link/20260806052136.21034-1-phucduc.bui@gmail.com |
||
|
|
5784ef4468 |
ASoC: rockchip: spdif: Return the original error code
Return the original error code directly and drop the redundant error message since the called function already reports the failure. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-15-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
26c9632c33 |
ASoC: rockchip: rockchip_sai: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-14-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
7a2229ef7c |
ASoC: rockchip: rockchip_sai: Return the original error code
Return the original error code directly and drop the redundant error message since the called function already reports the failure. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-13-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
c97bdbf862 |
ASoC: rockchip: rockchip_sai: Propagate -EPROBE_DEFER from IRQ lookup
Return -EPROBE_DEFER from platform_get_irq_optional() so the driver is re-probed when the interrupt resource becomes available instead of continuing probe without an IRQ. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-12-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
b300f1313b |
ASoC: rockchip: rockchip_rt5645: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-11-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
7d3f7eb890 |
ASoC: rockchip: rockchip_pdm: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-10-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
de983524dc |
ASoC: rockchip: rockchip_max98090: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-9-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
9fea4805ed |
ASoC: rockchip: i2s-tdm: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-8-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
334d5ea758 |
ASoC: rockchip: i2s-tdm: Inline PTR_ERR() in dev_err_probe()
Pass PTR_ERR() directly to dev_err_probe() and avoid assigning it to the local variable first. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-7-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
be4f82d152 |
ASoC: rockchip: rockchip_i2s: Propagate -EPROBE_DEFER from devm_pinctrl_get()
Return -EPROBE_DEFER from devm_pinctrl_get() instead of ignoring it and continuing probe. This allows the driver to be reprobed once the pinctrl provider becomes available. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-6-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
c1bf7ae0c8 |
ASoC: rockchip: rockchip_i2s: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-5-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
b5e4b11597 |
ASoC: rockchip: rockchip_i2s: Use dev_err_probe() for error handling
Replace dev_err() with dev_err_probe() to prevent log spam when probe returns -EPROBE_DEFER. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-4-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
06f5854050 |
ASoC: rockchip: rk3288_hdmi_analog: Use dev_err_probe() for error handling
Replace dev_err() with dev_err_probe() to prevent log spam when probe returns -EPROBE_DEFER. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-3-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
931f4a1223 |
ASoC: rockchip: rk3288_hdmi_analog: Drop redundant probe error messages
Remove the probe error messages to avoid duplicate error reporting, since the error is already reported by the called functions. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260806052136.21034-2-phucduc.bui@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
0c4ef23e66 |
ASoC: meson: Drop __force cast
Now that the bitwise parameter definitions are gone for PCM parameters, we don't have to cast with ugly __force prefix. Simply drop a superfluous cast. Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260812060557.80445-15-tiwai@suse.de |