The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks.
Fixes: 3782b69d03 ("mt76: mt7915: introduce mt7915_mac_add_twt_setup routine")
Link: https://patch.msgid.link/20260724124813.3961474-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Because 4 address non-AMSDU packets do not have a bssid field, the
hardware cannot get the bssid. Without the bssid, stations are not
able to leave PS mode due to HW design. Wake up non-setup links when
4-address mode is established to prevent this issue.
mt7992 and mt7990 handle this via the BSSID mapping band config
instead, so restrict the command to mt7996.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20260724124813.3961474-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
try_count is initialized to 5 but never decremented in the retry path,
making the `if (try_count)` check always true. If all NACL shared memory
hfence entries remain in the pending state after sync, the function loops
forever, causing a soft lockup. Decrement try_count on each retry so the
fallback warning and return become reachable.
Fixes: d466c19cea ("RISC-V: KVM: Add common nested acceleration support")
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260716073756.44153-1-min_halo@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
FENCE.I does not need hfence data, but it currently goes through the
generic make_xfence_request() path with NULL data, incurring unnecessary
per-VCPU checks.
Split out a separate make_xfence_request_nodata() function to handle
FENCE.I directly, and move the data validity check to the top of the
generic function to avoid redundant checks.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731093833.1551341-3-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When handling hfence requests in make_xfence_request(), the current code
uses a single 'actual_req' variable and a single vcpu_mask. If any VCPU
fails to enqueue the hfence data (because its queue is full), the request
falls back to 'fallback_req' for all VCPUs, even if other VCPUs still
have available queue space.
This can cause unnecessary fallback for healthy VCPUs, and more seriously,
those healthy VCPUs will not process their already-enqueued hfence
requests because no 'req' is set for them. As a result, their queues will
quickly become full as well, degrading performance for SMP guests.
Fix this by maintaining two separate bitmaps: one for VCPUs that
successfully enqueued the hfence data (req_vcpu_mask) and another for
those that failed (fallback_req_vcpu_mask). Then send the appropriate
requests to each group. This ensures that fallback is only applied to
VCPUs that actually need it, preserving the efficiency of the normal
path for others.
Fixes: 13acfec2db ("RISC-V: KVM: Add remote HFENCE functions based on VCPU requests")
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731093833.1551341-2-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When CONFIG_ZSTD_DECOMPRESS is not enabled, and neither
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY nor
CONFIG_SECURITY_APPARMOR_COMPRESSED_POLICY are enabled.
The build will fail with implicit declaration of function
'decompress_zstd' because there is not an appropriate stub function,
for when the zstd decompression isn't enabled.
In addition fix compress_min, and compress_max to be conditional on
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY, as they are used with the
exported policy.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608010834.9yIVzhG2-lkp@intel.com/
Fixes: 1c5f27e845 ("apparmor: Fix build failure when ZSTD_DECOMPRESS is not enabled")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add an eager_page_split module parameter for RISC-V KVM, following
the same approach as on x86. This parameter controls whether eager
page splitting is enabled. The default value is on.
When eager page splitting is enabled, KVM proactively splits large
pages (huge pages) into smaller pages when needed for dirty logging
or other operations. Disabling it can be beneficial for VM workloads
that rarely perform writes, or that only write to a small region of
memory, as it allows huge pages to remain intact for read accesses.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731091215.1549430-6-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
Split huge pages on the range specified using KVM_CLEAR_DIRTY_LOG.
And do not split when enabling dirty logging if
KVM_DIRTY_LOG_INITIALLY_SET is set.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731091215.1549430-5-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
The function kvm_arch_mmu_enable_log_dirty_pt_masked() is invoked from
two distinct call paths:
kvm_clear_dirty_log_protect()
kvm_arch_mmu_enable_log_dirty_pt_masked()
kvm_vm_ioctl_reset_dirty_pages()
kvm_dirty_ring_reset()
kvm_reset_dirty_gfn()
kvm_arch_mmu_enable_log_dirty_pt_masked()
In both scenarios, the caller already performs a remote TLB flush after
dirty logging is enabled, so the TLB flush inside
kvm_arch_mmu_enable_log_dirty_pt_masked() is unnecessary. Remove it.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731091215.1549430-4-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
Split huge pages eagerly when enabling dirty logging. The goal is to
avoid doing it while faulting on write-protected pages, which
negatively impacts guest performance.
The benefits of eager page splitting are the same as in x86 and arm64,
added with commit a3fe5dbda0 ("KVM: x86/mmu: Split huge pages mapped
by the TDP MMU when dirty logging is enabled") and commit e7bf7a490c
("KVM: arm64: Split huge pages when dirty logging is enabled")
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731091215.1549430-3-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears
VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM
object and then calls madvise(MADV_DONTNEED), the PTEs will be
successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP).
When userspace subsequently accesses the memory, drm_gem_shmem_fault()
handles the page fault and attempts to map the backing shmem page via
vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing
shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA
now has VM_MIXEDMAP set, won't this predictably trigger the explicit
assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn))
Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages()
pre-population with the handle_mm_fault() loop that was already used for
the import (dma-buf) path.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260731185955.3449311-1-lizhi.hou@amd.com
Currently, several files in the PCI tree print error pointers using
the %ld format specifier together with an explicit PTR_ERR()
conversion, which prints the numeric errno value.
Thus, at every affected call site, use the %pe format specifier, which
exists specifically to print error pointers, and pass the error pointer
directly. With CONFIG_SYMBOLIC_ERRNAME enabled, this prints a symbolic
error name such as -ENOMEM, falling back to the numeric errno value
otherwise. As such, the explicit PTR_ERR() conversion is no longer
needed.
No functional changes intended.
Link: https://patch.msgid.link/20260720210839.1507406-1-kwilczynski@kernel.org
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
- Fix regression with MO= when building out of tree kernel modules due
to incorrectly overwriting build tree's Makefile
- Avoid stripping .BTF sections from modules when building debug .rpm
packages
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCam1cngAKCRAdayaRccAa
lt/FAQDqTsqzD4FKeeOUkyoIahT+l31Spa0VNUTMa+EwEv24WwEAjExf66Ch7rVe
KRdLXdDUSRI8TZiDZeibf8kGx0i+PwQ=
=1d+/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix regression with MO= when building out of tree kernel modules due
to incorrectly overwriting build tree's Makefile
- Avoid stripping .BTF sections from modules when building debug .rpm
packages
* tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Preserve BTF sections in kernel modules during debuginfo stripping
kbuild: Stop modifying $(objtree)/Makefile when building oot-kmods oos
- Reset dropped_count in mmio_reset_data()
When mmio_reset_data() is called, it does not reset the dropped_count
so that subsequent runs will have incorrect reporting.
- Add NULL check for mmio_trace_array in logging functions
The functions __trace_mmiotrace_rw() and __trace_mmiotrace_map()
may have the 'tr' variable passed to it as NULL. But they both
dereference it without checking if it is NULL first.
- Check return value of __register_event() in trace_module_add_events()
If __register_event() fails, the call after it (__add_event_to_tracers())
will create a file for it. If the module fails to load and its memory
is freed, the file will still point to it and it will not be removed
as the registering of the event did not complete. Only call
__add_event_to_tracers() if the __register_event() was successful.
- Fix false positive match in regex_match_full()
The regex full matching uses a strncmp() to test against the match
string and the value. It should not match if value is a prefix of
the string to match. Check to make sure the length of the strings
match before comparing.
- Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data.
- Fix memory leak of subbuf_ids in rb_allocate_cpu_buffer()
Remote buffers allocate a subbuf_ids array. If the allocator function
fails after it is allocated, it does not free it, resulting in a
memory leak.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCam1A0RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlW/AQDCpddDwAMwN80i3tn5uiqec9JLZT5I
DR6G+0zEF9a5DAD2IxiD3gH/mPVZ3CdiqfElBqjc0Pq1dx414xmzXBv+CA==
=GUpD
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Reset dropped_count in mmio_reset_data()
When mmio_reset_data() is called, it does not reset the dropped_count
so that subsequent runs will have incorrect reporting.
- Add NULL check for mmio_trace_array in logging functions
The functions __trace_mmiotrace_rw() and __trace_mmiotrace_map() may
have the 'tr' variable passed to it as NULL. But they both
dereference it without checking if it is NULL first.
- Check return value of __register_event() in trace_module_add_events()
If __register_event() fails, the __add_event_to_tracers() call after
it will create a file for it. If the module fails to load and its
memory is freed, the file will still point to it and it will not be
removed as the registering of the event did not complete.
Only call __add_event_to_tracers() if the __register_event() was
successful.
- Fix false positive match in regex_match_full()
The regex full matching uses a strncmp() to test against the match
string and the value. It should not match if value is a prefix of the
string to match. Check to make sure the length of the strings match
before comparing.
- Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data.
- Fix memory leak of subbuf_ids in rb_allocate_cpu_buffer()
Remote buffers allocate a subbuf_ids array. If the allocator function
fails after it is allocated, it does not free it, resulting in a
memory leak.
* tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix subbuf_ids memory leak in rb_allocate_cpu_buffer() error path
ring-buffer: Fix reader page read offset for remote buffers
tracing/filters: Fix false positive match in regex_match_full()
tracing: Check return value of __register_event() in trace_module_add_events()
tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions
tracing/mmiotrace: Reset dropped_count in mmio_reset_data()
Sort it according to the following precedence of struct cpuid_bit fields:
(level) -> (sub_leaf) -> (reg) -> (bit).
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
bui duc phuc <phucduc.bui@gmail.com> says:
While cleaning up the SPEAr SPDIF driver probe path by removing
redundant error messages, build testing revealed several compilation
failures caused by outdated ASoC APIs.
The series first removes the redundant error messages, then updates the
driver to match the current ASoC APIs by replacing the removed
capture_dma_data field usage with the corresponding helper API, and
moving the DAI probe callback to struct snd_soc_dai_ops.
Link: https://patch.msgid.link/20260730095407.33894-1-phucduc.bui@gmail.com
The .probe callback is no longer part of struct snd_soc_dai_driver
and is now provided through struct snd_soc_dai_ops.
Move spdif_soc_dai_probe() accordingly so the driver follows the current
ASoC API and builds correctly on modern kernels.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .probe callback is no longer part of struct snd_soc_dai_driver
and is now provided through struct snd_soc_dai_ops.
Move spdif_in_dai_probe() accordingly so the driver follows the current
ASoC API and builds correctly on modern kernels.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the legacy direct access to dai->capture_dma_data with
snd_soc_dai_dma_data_set_capture().
The capture_dma_data field no longer exists in struct snd_soc_dai,
making the previous implementation incompatible with current ASoC APIs.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
This is v3 of "ASoC: use .auto_selectable_formats", but separated into
small blocks. It is Step1, and it will be Step4 in total.
x: this patch-set
[x] Step1: ASoC: a to b
[ ] Step2: ASoC: codec: ...
[ ] Step3: ASoC: d to r
[ ] Step4: ASoC: r to x
Current ASoC supports snd_soc_daifmt_parse_format() which can specify DAI
format by "dai-format" property from DT.
But strictly speaking, it is SW settings, so doesn't match to DT's policy.
Current ASoC is supporting auto format select via
snd_soc_dai_ops :: .auto_selectable_formats.
But the user is very few today.
DT doesn't need to specify the DAI format via "dai-format", if both CPU
and Codec drivers were supporting .auto_selectable_formats. It will be
automatically selected from .auto_selectable_formats.
One note is that auto select might not find best format on some CPU/Codec
combination. So "dai-format" is necessary anyway.
Link: https://lore.kernel.org/r/8733zfj5jj.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87pl0r20qo.wl-kuninori.morimoto.gx@renesas.com
Link: https://patch.msgid.link/87zezljgxy.wl-kuninori.morimoto.gx@renesas.com
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This series adds sound support for the Monaco/Monza (VENTUNO-Q)
platform on the QCS8275 board, which uses a MAX98091 codec on an
LPI MI2S link.
Patch 2 (from Neil) registers the LPASS MCLK1..MCLK5 clock IDs in
q6prm-clocks.c. Without these entries the DT clock reference
"clocks = <&q6prmcc LPASS_CLK_ID_MCLK_3 ...>" that the MAX98091
node uses cannot resolve at probe, and the codec silently runs
without MCLK.
Note: this patch has been posted to the list more than once from Oct
2025 and does not appear to be actively pursued by anyone. I
am picking it up here because the rest of this series depends on
it to get sound working on QCS8275, and it makes little sense to
send the machine-driver changes without the clock IDs they rely
on.
With these patches now we have full audio working on Arduino VENTUNO-Q.
Link: https://patch.msgid.link/20260731162626.1588561-1-srinivas.kandagatla@oss.qualcomm.com
When host is powered off, firmware does not send vhca_state event
for every probed host SF on the DPU because it may have deployed
thousands of SFs to the host. Instead it sends a function changed
event. Currently, only VFs handle this event. This commit extends
support to SFs.
When DPU user deactivates[1] SFs, mlx5 expects vhca_state event
and leaves the SF in dangling state[2].
When DPU user deletes[3] SFs, mlx5 also expects vhca_state event
and destroys the SF resources[4].
Fix it by changing SF to the right state and freeing SF resources
when the function changed event is received.
When this event is received, driver checks all SF states.
- If state is in_use, change it to active.
- If state is teardown_request, change it to allocated.
And SF hardware table entry is freed if it is pending for delete.
[1]
# devlink port function set en3f0c1pf0sf0 state inactive
[2]
# devlink port function set en3f0c1pf0sf0 state active
Error: mlx5_core: SF is inactivated but it is still attached.
kernel answers: Device or resource busy
[3]
# devlink port show
pci/0000:03:00.0/229376: type eth netdev en3f0c1pf0sf0 \
flavour pcisf controller 1 pfnum 0 sfnum 0 splittable false
function:
hw_addr 00:00:00:00:00:00 state active opstate attached \
roce enable trust off max_uc_macs 4096 max_io_eqs 8
# devlink port del en3f0c1pf0sf0
[4]
# devlink port add pci/0000:03:00.0 flavour pcisf pfnum 0 sfnum 0 \
controller 1
Error: mlx5_core: SF already exist. Choose different sfnum.
kernel answers: File exists
Fixes: 6a32732174 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260729071622.2423270-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path.
Fixes: 2edd925704 ("devlink: don't allow to change net namespace for FW_ACTIVATE reload action")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260729080600.2427721-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8261D is also 10g phy. It's sub_phy_id is 0x81. And it does not need
any firmware.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20260728073106.1515-6-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for loading firmware. Download some parameters
for RTL8261C_CG.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260728073106.1515-5-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for Realtek phy chip RTL8261C_CG. Its PHY ID is
0x001cc898.
This patch introduces a distinct family of handlers (probe, get_features,
config_aneg, read_status, config_intr, handle_interrupt).
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20260728073106.1515-4-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two static helpers in drivers/net/phy/phy-c45.c to
configure and read back master-slave roles for non BASE-T1 Clause 45
PHYs via the 10GBASE-T AN control/status registers.
These helpers are wired into genphy_c45_config_aneg() and
genphy_c45_read_status(). This changes the observable ethtool output
for drivers using the generic c45 read path.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20260728073106.1515-3-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a generic Clause 45 software reset helper. The helper sets the reset
bit in the PMA/PMD control register and waits until the bit is cleared by
hardware.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20260728073106.1515-2-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hix5hd2_dev_remove() calls netif_napi_del() before unregister_netdev().
This is not needed because free_netdev() deletes all NAPI instances
attached to the net_device.
Remove the redundant call and let the networking core tear down the NAPI
instance during unregister_netdev(). The probe error path still keeps its
explicit netif_napi_del(), because the device has not been registered
there.
Fixes: 57c5bc9ad7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Jiawen Liu <1298662399@qq.com>
Link: https://patch.msgid.link/tencent_5FFD37A252B4FEA6A80AD25B17C8E904F005@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sync ensures that all packets that were in flight are flushed out to
memory. This can be used to assist in the tearing down of an active RQ.
To complete disabling RQs or disabling SMQ and its SQs, LF software
send mbox to AF to complete RX_SW_SYNC.
Both VF and PF and invoke this mbox.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260727101608.300290-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The BPF trampoline preserves only 8 bytes of the target's return value
(R0), so attaching an fexit/fmod_ret/fsession program to a function that
returns a >8 byte value is now rejected by the verifier. Add a bpf_testmod
function returning __int128 and an fexit program that targets it. The
program is expected to fail to load with the "with a >8 byte return value
is not supported for this attach type" message.
A 128-bit __int128 argument is passed in a register pair and occupies two
trampoline context slots. Add a bpf_testmod function taking a leading
__int128 argument followed by an int and a long, and an fexit program that
reads those two trailing arguments and the return value, verifying that the
trampoline reserves enough stack for the 128-bit argument and places the
following arguments and the return value at the right context slots.
__int128 is only available on 64-bit targets (where the compiler defines
__SIZEOF_INT128__). The argument test additionally depends on the calling
convention: x86_64 and arm64 pass an __int128 in a register pair as the
trampoline expects, while other architectures pass it differently (e.g.
s390x passes larger arguments by reference), so that subtest runs only on
x86_64 and arm64 and is skipped elsewhere.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260729050209.2587581-1-yonghong.song@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it.
Fixes: a9c5ad31fb ("bpf: x86: Support in-register struct arguments in trampoline programs")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260729050204.2586457-1-yonghong.song@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
btf_distill_func_proto() builds the function model used for the
fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has
accepted a 16-byte __int128 return value since the trampoline was
introduced: __get_type_size() returns the integer's type size, and the
return-type check only rejected ret < 0.
But the BPF trampoline preserves only 8 bytes of the return value (RAX on
x86, i.e. R0). For an attach type that reads the target's return value the
second half (RDX / R3) is neither saved nor restored, so a program
attached to a function returning a 16-byte value corrupts the value seen
by the real caller and itself observes only half of it. struct_ops
trampolines have the same limitation.
This affects the attach types that read the target's return value: fexit,
fmod_ret and fsession (plus the _multi variants of fexit and fsession),
and struct_ops. fentry/fentry_multi run before the target returns and are
unaffected.
Reject a >8 byte return value for these attach types in
bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for
struct_ops in bpf_struct_ops_desc_init().
Fixes: fec56f5890 ("bpf: Introduce BPF trampoline")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260729050159.2585809-1-yonghong.song@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
- Keep RECALL_ON_OPEN in inode flags when reloading them from $FILE_NAME.
- Check runlist reallocation sizes for negative values and overflow.
- Drop stale page cache after shrinking non-resident attributes to prevent
writeback failures and data loss.
-----BEGIN PGP SIGNATURE-----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=/w7C
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs fixes from Namjae Jeon:
- Keep RECALL_ON_OPEN in inode flags when reloading them from
$FILE_NAME
- Check runlist reallocation sizes for negative values and overflow
- Drop stale page cache after shrinking non-resident attributes to
prevent writeback failures and data loss
* tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: drop stale page-cache when shrinking a non-resident attr
ntfs: harden runlist realloc size calculations
ntfs: preserve RECALL_ON_OPEN on WSL special-file reparse points
-----BEGIN PGP SIGNATURE-----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=l3O8
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Use memcmp() when comparing fixed-size binary ClientGUIDs, so
embedded NUL bytes are handled correctly
- Reject repeated SMB2 NEGOTIATE requests after dialect selection
This prevents preauth_info leaks, enforces the SMB2 protocol
requirements, and serializes negotiation state updates.
- Fix a use-after-free in __close_file_table_ids() by removing the
volatile file ID from the owning IDR before dropping the IDR
reference
* tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use memcmp() to compare ClientGUIDs
ksmbd: reject repeated SMB2 NEGOTIATE requests
ksmbd: fix use-after-free in __close_file_table_ids()
The route4 classifier maintains a 16-slot fastmap cache that stores raw
struct route4_filter pointers indexed by (id, iif). The reader
(route4_classify) populates this cache via route4_set_fastmap() for every
classified packet that hits a filter. The writer (route4_delete,
route4_change) clears the cache via route4_reset_fastmap() before
RCU-deferred kfree of the filter.
This creates a UAF race:
1. Reader walks the RCU-protected bucket chain, finds filter f
2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work()
3. Reader calls route4_set_fastmap() and writes f into the cache
*after* the writer's reset, caching a pointer about to be freed
4. After the RCU grace period, kfree(f) executes
5. Next classified packet on the same (id, iif) tuple hits the stale
fastmap entry and reads f->res from freed memory
Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a
concurrent add/delete stress test (provided by both zdi and Santosh).
Both triggered KASAN slab-use-after-free reports in the route4 fastmap
paths.
Fix:
Introduce a per-filter boolean dying flag to suppress stale fastmap
republishing by in-flight readers.
Fixes: 1109c00547 ("net: sched: RCU cls_route")
Reported-by: zdi-disclosures@trendmicro.com
Reported-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260729094411.46257-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen).
- Fix ahci_ceva driver initialization error path (Radhey).
- Fix libata header file to remove a kernel doc compilation warning
(Randy).
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt).
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me).
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas).
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCam01HgAKCRDdoc3SxdoY
dv7zAP9Fc6HE7yW9XtTWmHHDC/pqVBuxIpaWXggcBMPCY4GzkgD+MgA97IsQf6QU
4kun74jcJuZJzBbMjBNLesIzPaYQ5Qo=
=qRqX
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen)
- Fix ahci_ceva driver initialization error path (Radhey)
- Fix libata header file to remove a kernel doc compilation warning
(Randy)
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt)
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me)
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas)
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas)
* tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: fix ata_scsi_lpm_supported() iteration
ata: libata-core: Disable LPM on WD Green 2.5 480GB
ata: libata-core: Disable LPM on some WD drives
scsi: libsas: terminate deferred commands on time out
ata: libata-scsi: schedule deferred atapi command
ata: libata-scsi: terminate deferred commands on time out
ata: libata-eh: Increase STANDBY IMMEDIATE timeout
ata: libata: avoid kernel-doc warnings
ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources()
ata: sata_mv: accept 1 or 2 resources in platform probe
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dawid Wróbel <me@dawidwrobel.com> says:
Both drivers access enumerated controls through value.integer.value[0]
instead of value.enumerated.item[0]. The same bug was fixed in rx-macro
and va-macro in 2022 (bcfe5f76cc, 0ea5eff7c6); tx-macro and
wsa-macro were missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check, and every read of the affected controls fails with
-EINVAL.
Reproduced and fixed on a Xiaomi Mi Pad 5 Pro (SM8250) for tx-macro.
wsa-macro is compile-tested only — that codec is not instantiated on
this hardware.
Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-0-6d091c736116@dawidwrobel.com
