Proactive reclaim (triggered via memory.reclaim or node sysfs) checks for
pending signals in its outer loop in user_proactive_reclaim(). However,
the inner reclaim loops—specifically scanning cgroups in shrink_many()
and evicting/aging folios in try_to_shrink_lruvec()—can run for a long
time before returning to the outer loop, especially on systems with many
cgroups or large memory sizes.
During system suspend, the PM freezer attempts to freeze all tasks by
sending fake signals (setting TIF_SIGPENDING). Because the inner loops do
not check for pending signals, the proactive reclaim task can remain stuck
in kernel space for seconds, failing to enter the refrigerator in a timely
manner. This leads to suspend failures due to freeze timeouts, a behavior
observed on Android devices.
This latency issue is specific to proactive reclaim because of its large,
user-defined reclaim targets (could be gigabytes). Since commit
287d5fedb3 ("mm: memcg: use larger batches for proactive reclaim"),
proactive reclaim uses larger decaying batch sizes (starting at 1/4 of the
remaining target) to maintain throughput. This keeps the task in the
inner reclaim loop for extended periods. In contrast, reactive reclaim
(global/memcg) uses small targets (SWAP_CLUSTER_MAX, typically 32 pages),
allowing it to return to the outer loop and check signals frequently.
To fix this, add a signal_pending() check to should_abort_scan() for
proactive reclaim paths. Since should_abort_scan() is called within the
inner scanning and eviction loops, this allows proactive reclaim to abort
early and return to the outer loop in user_proactive_reclaim().
Additionally, return -ERESTARTSYS instead of -EINTR in
user_proactive_reclaim(). When interrupted by system suspend, returning
-ERESTARTSYS allows the task to enter the refrigerator and automatically
restart the syscall upon resume, making the freezer transparent to
userspace. For real signals, the signal layer will either restart the
syscall (if SA_RESTART is set) or return -EINTR to userspace.
This fix specifically targets Multi-Gen LRU (MGLRU). Classic LRU's scan
targets per iteration are strictly bounded by get_scan_count(), which
ensures it returns to the outer loop more frequently.
The check in should_abort_scan() is limited to proactive reclaim
(sc->proactive) to avoid inadvertently affecting reactive reclaim paths,
and is wrapped in unlikely() as it is a slow path.
Link: https://lore.kernel.org/20260720044103.905191-1-richardycc@google.com
Fixes: 287d5fedb3 ("mm: memcg: use larger batches for proactive reclaim")
Fixes: 94968384dd ("memcg: introduce per-memcg reclaim interface")
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Richard Chang <richardycc@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Martin Liu <liumartin@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch my entry in MAINTAINERS and .mailmap to my @linux.dev email address
Link: https://lore.kernel.org/20260721101811.115954-1-nico.pache@linux.dev
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Nico Pache (Red Hat) <nico.pache@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I am no longer at Google.
Link: https://lore.kernel.org/20260718172923.8297-1-peter@pcc.me.uk
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update MAINTAINERS and .mailmap to point to my gmail.com address:
burak.emir@gmail.com.
Link: https://lore.kernel.org/20260718151303.2649-1-burak.emir@gmail.com
Signed-off-by: Burak Emir <burak.emir@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__folio_split() keeps dereferencing the mapping after the split:
shmem_uncharge(mapping->host) and remap_page() while the folios are still
frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the
after-split folios have been unlocked and freed.
Nothing holds an inode reference across that. The split relies on @folio
-- which the beyond-EOF drop loop never removes, as it starts at
folio_next(folio) -- staying locked and in the page cache to hold off
eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read()
runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure()
passes when splitting a poisoned tail of a shmem THP that reaches past
i_size during truncation, it too is gone from the page cache; so once
@folio is unlocked no locked, in-cache folio pins the inode, and a
concurrent final iput() can evict and RCU-free it before
i_mmap_unlock_read() touches i_mmap_rwsem:
BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790
i_mmap_unlock_read include/linux/fs.h:537 [inline]
__folio_split+0x732/0x1640 mm/huge_memory.c:4100
try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675
memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470
Freed by task 4601:
shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177
evict+0x57f/0xac0 fs/inode.c:870
Do every mapping dereference while @folio still pins the inode: drop
i_mmap_rwsem right after remap_page(), before the loop that unlocks and
frees the after-split folios, and clear @mapping so the exit path does not
unlock it again. shmem_uncharge() and remap_page() already run before
that point, so after this nothing past the unlock loop touches the inode
or the mapping.
This is now a rule the split depends on, alongside keeping @folio frozen
until the page cache is updated: no inode or mapping dereference once the
after-split folios start being unlocked.
Link: https://lore.kernel.org/20260716095424.471052-1-kirill@shutemov.name
Fixes: baa355fd33 ("thp: file pages support for split_huge_page()")
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reported-by: Hao Zhang <zhanghao1@kylinos.cn>
Closes: https://lore.kernel.org/linux-mm/20260710071344.GA106129@zh-pc
Co-developed-by: Hao Zhang <zhanghao1@kylinos.cn>
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__folio_migrate_mapping() increments MTHP_STAT_NR_ANON for the destination
folio when `folio_test_anon(folio) && folio_test_large(folio)` is true.
However, hugetlb folios satisfy both conditions despite having a
completely separate accounting system — they use hugetlb_add_anon_rmap()
which does not touch mTHP stats, and their free path also bypasses the
mTHP decrement in __free_pages_prepare().
This causes MTHP_STAT_NR_ANON to be incremented on each hugetlb migration
without a corresponding decrement, permanently inflating the nr_anon
counter.
Add a !folio_test_hugetlb() check to __folio_migrate_mapping() so that
only actual mTHP folios are counted.
Link: https://lore.kernel.org/20260717064502.1980173-3-npache@redhat.com
Fixes: 5d65c8d758 ("mm: count the number of anonymous THPs per size")
Co-developed-by: David Hildenbrand <david@kernel.org>
Signed-off-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: fix PMD level mTHP accounting bugs", v2.
While running selftests I noticed the PMD level per-mTHP stats (nr_anon)
remained elevated after each run. After further investigation I noticed
this accounting error occurs for both the migration.private_anon_htlb_test
and the HMM tests.
In the HMM case this is due to folio_add_new_anon_rmap() incrementing the
mTHP stats, but never containing a corresponding decrement in
free_zone_device_folio(). We solve this by making sure to decrement the
counter when freeing device memory.
In the migration case, we are incrementing this counter without first
checking whether this folio is a hugetlb folio, which relies on a separate
accounting system. We solve this by adding the proper hugetlb check
before incrementing this counter.
With these changes in place, the two tests no longer cause elevated PMD
level accounting issues.
This patch (of 2):
When a zone device folio is mapped as anonymous, folio_add_new_anon_rmap()
increments MTHP_STAT_NR_ANON. The corresponding decrement lives in
__free_pages_prepare() in page_alloc.c, but zone device folios are freed
via free_zone_device_folio() which never calls __free_pages_prepare().
This causes nr_anon to remain permanently elevated after zone device
folios are freed.
Add the missing mod_mthp_stat() decrement to free_zone_device_folio() so
that the counter is properly balanced.
Link: https://lore.kernel.org/20260717064502.1980173-1-npache@redhat.com
Link: https://lore.kernel.org/20260717064502.1980173-2-npache@redhat.com
Fixes: 5d65c8d758 ("mm: count the number of anonymous THPs per size")
Co-developed-by: David Hildenbrand <david@kernel.org>
Signed-off-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_cgroup_oom() passes an uninitialized "locked" to memcg1_oom_prepare()
and reads it back in memcg1_oom_finish():
bool locked, ret;
...
if (!memcg1_oom_prepare(memcg, &locked))
return false;
ret = mem_cgroup_out_of_memory(memcg, mask, order);
memcg1_oom_finish(memcg, locked);
This relies on memcg1_oom_prepare() setting *locked whenever it returns
true. The CONFIG_MEMCG_V1=y version does, but the stub used when
CONFIG_MEMCG_V1=n returns true without touching *locked, so
memcg1_oom_finish() consumes an uninitialized value. On a memcg OOM this
is reported by UBSAN:
UBSAN: invalid-load in mm/memcontrol.c:1932:27
load of value 0 is not a valid value for type 'bool' (aka '_Bool')
Initialize *locked to false in the stub; with cgroup v1 compiled out there
is no OOM lock to take.
Link: https://lore.kernel.org/20260716-memcg-oom-uninit-locked-v2-1-63631d878eb4@debian.org
Fixes: e93d4166b4 ("mm: memcg: put cgroup v1-specific code under a config option")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- hci_sync: Fix advertising data UAFs
- hci_conn: hold conn reference fixes
- L2CAP: fix UAF in l2cap_le_connect_rsp
- RFCOMM: validate skb length in rfcomm_recv_frame
- ISO: Locking fixes
- SCO: give the socket its own sco_conn reference
- MGMT: fix UAF in pair command cancellation
- MGMT: fix pending command UAF in EIR updates
- HIDP: reject frames without a transaction header
- HIDP: validate numbered report payloads
- btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
- btmtk: Fix short read errors in btmtk_usb_reg_read()
- btusb: Fix short read errors in btusb_qca_send_vendor_req()
- btintel: Validate length before parsing diagnostics TLV
-----BEGIN PGP SIGNATURE-----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=3LzD
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix advertising data UAFs
- hci_conn: hold conn reference fixes
- L2CAP: fix UAF in l2cap_le_connect_rsp
- RFCOMM: validate skb length in rfcomm_recv_frame
- ISO: Locking fixes
- SCO: give the socket its own sco_conn reference
- MGMT: fix UAF in pair command cancellation
- MGMT: fix pending command UAF in EIR updates
- HIDP: reject frames without a transaction header
- HIDP: validate numbered report payloads
- btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
- btmtk: Fix short read errors in btmtk_usb_reg_read()
- btusb: Fix short read errors in btusb_qca_send_vendor_req()
- btintel: Validate length before parsing diagnostics TLV
* tag 'for-net-2026-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: (31 commits)
Bluetooth: SCO: give the socket its own sco_conn reference
Bluetooth: btusb: Fix short read errors in btusb_qca_send_vendor_req()
Bluetooth: btmtk: Fix short read errors in btmtk_usb_reg_read()
Bluetooth: btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
Bluetooth: hci_sync: remove unnecessary hci_conn_get in create_conn_sync
Bluetooth: hci_sync: fix hci_conn_del() use in hci_le_create_conn_sync
Bluetooth: hci_sync: hold conn in hci_past_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks
Bluetooth: hci_conn: hold conn reference in abort_conn_sync()
Bluetooth: btintel: Validate length before parsing diagnostics TLV
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
Bluetooth: ISO: fix refcounting of iso_conn
Bluetooth: ISO: ensure no dangling hcon references in iso_conn
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
Bluetooth: ISO: fix leaking sk after socket release
Bluetooth: ISO: hold sk properly in iso_conn_ready
Bluetooth: ISO: validate sockaddr_iso first in iso_sock_rebind_bis()
Bluetooth: ISO: fix timeout vs sync_timeout typo in check_bcast_qos
...
====================
Link: https://patch.msgid.link/20260728201527.2456032-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf2 ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6f16fcbb0c)
Cc: stable@vger.kernel.org
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5dafdd6492)
Cc: stable@vger.kernel.org
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121f ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790b)
Cc: stable@vger.kernel.org
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 138531c885)
Cc: stable@vger.kernel.org
Commit a4f01bf729 ("drm/amd/display: Refactor and fix link_dpms I2C")
had also changed the "Set retimer failed" messages from DC_LOG_DEBUG()
to DC_LOG_ERROR(). This unfortunately can create log spam.
Change those back to DC_LOG_DEBUG() only.
Fixes: a4f01bf729 ("drm/amd/display: Refactor and fix link_dpms I2C")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da8609eef1)
Cc: stable@vger.kernel.org
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff57e223ab)
Cc: stable@vger.kernel.org
Verify that the phantom plane was allocated to avoid a later
segfault.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4970
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5adb54abe5)
Cc: stable@vger.kernel.org
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29c0f7c655)
Cc: stable@vger.kernel.org
Port the three-frame wait logic from dcn30_set_avmute to
dce110_set_avmute so that older DCN versions (1.0, 2.0) also
wait for GCP packets to be sent out before proceeding.
This ensures HDMI sinks properly process the mute state,
preventing garbled display after link re-establishment.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 414da24137)
Cc: stable@vger.kernel.org
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4 ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48)
Cc: stable@vger.kernel.org
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba48 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd)
Cc: stable@vger.kernel.org
Set the default reset method to mode2 for SMU 15.0.5.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 314d49abe3)
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
Fixes: 42ea9cf2f1 ("drm/amdkfd: Relax size checking during queue buffer get")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae443117b7)
Cc: stable@vger.kernel.org
Add PSP 15.0.5 related offsets for GFX to KMD interface
and enable support for it.
Co-developed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b01e244c82)
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4db4c5ffd5)
Cc: stable@vger.kernel.org
The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.
To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.
Fixes: 59720bfd8c ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9da)
Cc: stable@vger.kernel.org
Update smu v15.0.0 driver if header to be v15.0.5 compatible.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ee6561f8a)
In kfd_criu_restore_event, there was no handling for
the event priv data having an invalid event type. The priv
data here is untrusted and can be invalid.
In that case, fail with EINVAL.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2e8e9963cd)
Cc: stable@vger.kernel.org
Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs
on Van Gogh. Logs are now gathered live rather than starting then
stopping logging and reading an average value afterwards. This is
in accordance to changes made in PMFW.
In regards to messageID 0x52, the old interface uses a start/stop
parameter, and the new one doesn't. The firmware is checked to
determine which method to use.
v2: added firmware guard to new interface, old interface kept as
fallback
Signed-off-by: Fares Soliman <Fares.Soliman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 482e2cadea)
Building for ARCH=um with W=1 C=1 makes the "amd_sriov_msg_vf2pf_info
must be 1 KB" static assertion in amdgv_sriovmsg.h fail under sparse,
exposed after UML builds were enabled.
Sparse does not honor #pragma pack(push, 1) for the nested ucode_info
struct, so it sizes each element as 8 bytes instead of 5 and computes
the surrounding structure as larger than 1 KB. The compilers get this
right via the enclosing pragma, but the annotation should be explicit.
Fixes: af3f2f5db2 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d8cfeb69d)
Building for ARCH=um with W=1 C=1 makes sparse report "incompatible
types in comparison expression (different address spaces)" warnings in
the KFD code, exposed after UML builds were enabled:
- amdgpu_amdkfd_fence.c compares the __rcu-annotated dma_fence.ops
pointer directly in to_amdgpu_amdkfd_fence().
- amdgpu_amdkfd_gpuvm.c compares the __rcu eviction fence pointer
directly in amdgpu_amdkfd_gpuvm_restore_process_bos().
Fixes: af3f2f5db2 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 764f241ad2)
When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during
the first queue creation for a process, pqm_create_queue() returns
early via 'return retval' without going through the err_create_queue
cleanup label.
This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called,
leaving the reserved QID bit permanently set in queue_slot_bitmap.
Over time this leaks QID slots, potentially exhausting all available
queue slots.
Fix this by replacing 'return retval' with 'goto err_allocate_pqn'
so that clear_bit() is always called on the error path without
touching the uninitialized pqn pointer.
AILIKFD-813
Reported-by: Deucher, Alexander <alexander.deucher@amd.com>
Signed-off-by: Vladimir Marioukhine <Vladimir.Marioukhine@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a107f74c38)
Cc: stable@vger.kernel.org
Some HDMI sinks need additional GCP packets to properly process the
mute state before the timing generator is disabled, especially after
link re-establishment with HDMI 2.0 scrambling enabled. Waiting for
only 2 frames is insufficient for certain monitor firmware, resulting
in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames
to ensure the sink receives enough GCP packets.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Assisted-by: Cursor:Claude-Opus-4.6
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c0d5174b0)
Cc: stable@vger.kernel.org
amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM
reservation fences via amdgpu_sync_resv() before checking whether vm->freed
has anything to clear. Return early when the list is empty to skip this
overhead on a hot path (every GEM close and command submission).
Signed-off-by: Bob Zhou <bobzhou2@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8ba869e852)
Instead of pinning the wptr bo attach the eviction fence to
the bo to make sure it remains valid all the time.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7264bc10c7)
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 48e1d1e6e8)
Cc: stable@vger.kernel.org
Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(),
which copies dirty DAT file folios/pages to its shadow page cache. The
BUG occurs when a retrieved dirty folio/page unexpectedly loses its
'dirty' status.
This issue arises because, since the commit referenced below, the 'dirty'
flag of a folio/page can be cleared asynchronously after the filesystem
detects metadata corruption and transitions to read-only mode.
Resolve the issue by returning an -EROFS error if the filesystem has
transitioned to read-only mode. Also change the behavior to issue a
kernel warning only once instead of triggering a kernel BUG when this
unexpected 'dirty' state is detected while the filesystem is not in
read-only mode.
Reported-by: syzbot+8baf9a79a3ffc6271cb6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8baf9a79a3ffc6271cb6
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
super-root inode metadata size is trusted before nilfs_read_inode_common().
Reject super-root inode sizes whose computed on-disk footprint exceeds the
filesystem block size. This prevents malformed filesystem images from
making nilfs_read_inode_common() read past the end of the super-root block.
[ryusuke: clarify the commit title]
Fixes: 8a9d2191e9 ("nilfs2: operations for the_nilfs core object")
Signed-off-by: David Lee <david.lee@trailofbits.com>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
syzbot reported a hung task in nilfs_transaction_begin(). This occurs
because the cleaner ioctl falls into an infinite loop if
nilfs_segctor_construct() repeatedly returns -EROFS (e.g. the device
is remounted as read-only after an I/O error).
Currently in nilfs_clean_segments(), if err is non-zero, it logs the
error and sleeps but doesn't abort when it encounters a terminal error
like -EROFS. This causes the thread to loop forever.
Fix this by breaking out of the loop if nilfs_segctor_construct()
returns -EROFS. This matches the behaviour in
nilfs_segctor_write_out(), which also handles -EROFS.
Reported-by: syzbot+cae54346a70bbceeff2c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cae54346a70bbceeff2c
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Assisted-by: gemini:gemini-3.1-pro
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
This patch requests PSP to set the sec lvl for
vcn and jpeg.
Signed-off-by: Suresh Guttula <suresh.guttula@amd.com>
Reviewed-by: McRae Geoffrey<Geoffrey.McRae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4c8b8472f8)
Shuangpeng Bai reported that KASAN detected a slab-out-of-bounds error
in nilfs_direct_propagate() during testing.
Analysis revealed that after truncating a file, a node block immediately
below the B-tree root was not deleted. Instead, it remained in the B-tree
node cache in a dirty state. The log writer subsequently detected this
block and incorrectly invoked nilfs_direct_propagate() on it, which is
designed to handle only data blocks in direct mapping.
B-tree nodes in the cache are managed by virtual block numbers, and their
logical keys typically exceed the range expected by direct mapping.
Consequently, processing such a node as a direct mapping entry triggers
a slab-out-of-bounds access.
The root cause is that when a B-tree mapping collapses into a direct
mapping during truncation, an intermediate node block pointed to by the
root node is left behind as garbage instead of being explicitly deleted.
This resolves the issue by adding a nilfs_btree_discard() operation
to delete the remaining intermediate node block during the conversion.
A 'deform' flag is added to the bop_delete interface to explicitly signal
that the deletion is part of a mapping transformation. This allows the
B-tree mapping implementation to perform the necessary cleanup and
discarding of the residual node structure that would be otherwise be left
orphaned after the transition.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/r/08A3603A-ADB6-484C-9015-9AC1340E6FB8@gmail.com
Fixes: 36a580eb48 ("nilfs2: direct block mapping")
Cc: stable@vger.kernel.org
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Add the volatile qualifier and clobbers parameter to prevent bugs with
instruction reordering and optimization.
Also add TEST for the zero-length case to set ZF, as, if the count register
is zero, the REPE prefix does not run the CMPSB instruction, leaving the ZF
flag undetermined.
[ bp: Add a comment about the len==0 case. ]
Fixes: 62bd0337d0 ("Top header file for new x86 setup code")
Closes: https://sashiko.dev/#/patchset/20260701-pvh-kasan-inline-v6-0-ba99045dfa9f%40igalia.com
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20260721-pvh-kasan-inline-v7-2-38979a50cef0@igalia.com
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf2 ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_range_evict_svm_bo_worker() migrated an SVM BO's pages back to system
memory from a work item that took mmap_read_lock. When an mmap writer was
pending, that read lock blocked behind the writer while the thread
allocating a new migration VRAM BO waited on this BO's eviction fence - a
circular wait that hung the SVM workers.
Evict the SVM BO synchronously from the TTM eviction path
(amdgpu_ttm_bo_eviction_valuable) instead of deferring to a work item.
The BO is already reserved and the lock order is mmap_lock -> BO
reservation, so only trylock the owning process's mmap lock; on
contention return -EBUSY so TTM skips this BO. This removes the eviction
work item and the enable_signaling path, so no worker can block on
mmap_read_lock.
The SVM BO uses AMDGPU_GEM_CREATE_DISCARDABLE, so ttm_bo_evict takes the
pipeline_gutting path and skips allocating a system memory placement.
That would be wasted work, since svm_migrate_vram_to_ram allocates the
system pages and copies the data back itself.
Eviction now migrates ranges directly, so it must serialize with the
owning process: it trylocks migrate_mutex under svm_bo->list_lock before
unlinking the range, and svm_range_free() unlinks the range then waits on
migrate_mutex, so a concurrent eviction cannot free a range under it.
Drop the mm reference with mmput_async so exit_mmap() does not run under
the BO reservation.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a mode reset happens, driver needs to notify the process on that
GPU a reset event is happening. The existing code assumes the process is
using the GPU that is getting mode reset, which is not always true. For
example, on a 8G system, the process may be only using GPU 0~4 but a
mode 2 reset is resetting the all 8 GPUs connected by XGMI. Trying to
find a process on GPU 5~7 will fail, which is fine and should skip the
event signal.
Signed-off-by: Amber Lin <amber.lin@amd.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121f ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By anchoring the search to the DML top-level Makefile directory,
FPU CFLAGS are now correctly applied to all relevant source files.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
