Make the PWM mode configurable from devicetree. Some boards require forced
PWM mode to keep the supply ripple within acceptable limits under light
load conditions
Support is restricted to Silergy manufacturer as it is the only one
currently tested.
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Link: https://patch.msgid.link/20260723094001.120264-5-victor.krawiec@arturia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fairchild FAN53555 and its clone from Rockchip, Silergy and TCS support
two modes of operation:
- Auto-PFM: Allow automatic PFM during light load (default mode)
- Forced PWM
Some boards require forced PWM mode to keep the supply ripple within
acceptable limits under light load conditions.
Regulator mode indexes are starting from 1 to keep backward compatibility
with existing device trees
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Link: https://patch.msgid.link/20260723094001.120264-2-victor.krawiec@arturia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the e1000_probe() path, e1000_sw_init() allocates adapter->tx_ring and
adapter->rx_ring. If the subsequent CE4100-specific MDIO BAR mapping
fails, the error handling jumps past the ring cleanup code, leaking both
allocations.
Fix this leak by moving the err_mdio_ioremap label above the ring
deallocation logic. This guarantees the proper release of these resources
and prevents the memory leak.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
CE4100 reference platform to test with, no runtime testing was able to
be performed.
Fixes: 5377a4160b ("e1000: Add support for the CE4100 reference platform")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed.
Fixes: c1fa347f20 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-4-7-opus
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When an AF_XDP zero-copy application is killed abruptly, the XSK pool is
torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the
full budget on every poll, so napi_complete_done() never clears
NAPI_STATE_SCHED.
igc_down() calls napi_synchronize() before napi_disable(), so it spins
forever waiting for that bit and the interface never goes down. Drop the
napi_synchronize() and let napi_disable() do the job -- it sets
NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it
ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after
polling has stopped, matching the recent igb fix b1e0672403.
Fixes: fc9df2a0b5 ("igc: Enable RX via AF_XDP zero-copy")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During reset recovery, the admin queue returns EBUSY which is expected
behavior. However, the DPLL subsystem was logging these as errors and
incrementing the error counter, potentially leading to unnecessary
warnings and even disabling the DPLL periodic worker if the threshold
was reached.
Suppress error logging and error counter increments when the admin
queue returns EBUSY, as this is expected during reset recovery and
not a real failure condition.
test case:
- ethtool --reset eth3 irq-shared dma-shared filter-shared offload-shared
mac-shared phy-shared ram-shared
- observe if dmesg EBUSY errors are gone
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_lbtest_prepare_rings() frees Rx rings only when
ice_vsi_start_all_rx_rings() fails. If ice_vsi_setup_rx_rings() fails
after allocating some descriptors, or if ice_vsi_cfg_lan() fails after
the Rx rings were prepared, the function reaches the Tx cleanup path
without releasing the initialized Rx resources.
Fix this by adding separate unwind paths for Rx setup failure and LAN
configuration failure. The Rx setup failure path releases the partially
prepared Rx rings before freeing Tx rings, while later failures first
undo the LAN Tx configuration and then release the Rx rings in reverse
setup order.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
Intel E800 Series adapter available to run the ethtool offline loopback
selftest, no runtime testing was able to be performed.
Fixes: 0e674aeb0b ("ice: Add handler for ethtool selftest")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a virtual function sends an IRQ map command, the PF will set up
interrupts according to that request. However, because these interrupts are
never reset, the next time Virtual Function initializes, the interrupts are
still enabled for a given VF, which leads to performance degradation in
certain cases due to interrupts being unexpectedly enabled and thus causing
interrupt floods.
Cc: stable@vger.kernel.org
Fixes: 1071a8358a ("ice: Implement virtchnl commands for AVF support")
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_resume() schedules an asynchronous PF reset and returns
immediately. The reset runs later in ice_service_task(). If
userspace tries to bring up the net device before the reset
finishes, ice_open() fails with -EBUSY:
ice_resume()
ice_schedule_reset() # sets ICE_PFR_REQ, returns
...
ice_open()
ice_is_reset_in_progress() # ICE_PFR_REQ still set, -EBUSY
...
ice_service_task()
ice_do_reset()
ice_rebuild() # clears ICE_PFR_REQ, too late
Reproduced on E800 series NICs during suspend/resume with irdma
enabled, where the aux device probe widens the race window.
ice 0000:81:00.0: can't open net device while reset is in progress
Add a best-effort wait (10s timeout, matching ice_devlink_info_get())
for the reset to complete before returning from ice_resume(). In
practice the reset completes in ~300ms.
Fixes: 769c500dcc ("ice: Add advanced power mgmt for WoL")
Cc: stable@vger.kernel.org
Reviewed-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf_mb_intr_req_irq() allocates the mailbox IRQ name before calling
request_irq(). On success, the name is released later through
kfree(free_irq()), but request_irq() failure returns without freeing it.
Free the allocated name on the request_irq() failure path.
Fixes: 4930fbf419 ("idpf: add core init and interrupt request")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Set the TxQ ring count minimum to 128 descriptors. Any lower than this,
and the queue will stall and trigger Tx timeouts in flow based
scheduling mode. This is because next_to_clean might never be updated.
In flow based scheduling mode, next_to_clean is only updated after a
descriptor completion is processed, i.e. after the RE bit is set in the
last descriptor of a Tx packet. This will never happen with a ring size
of 64 and an IDPF_TX_SPLITQ_RE_MIN_GAP of 64. No matter what the value
of last_re is initialized/set to, the calculated gap will be at most 63
and never trigger the RE bit.
Even a ring size of 96 does not solve this. Because of how infrequent
next_to_clean is updated and how small the ring is, IDPF_DESC_UNUSED
will be much smaller on average. This increases the chance the queue
will be stopped because a multi-descriptor packet, e.g. a large LSO
packet, does not see enough resources on the ring. In this case, the
queue will trigger the stop logic. The queue permanently stalls because
there is no chance for a descriptor completion to update next_to_clean
since it is dependent on a packet being sent.
Fixes: 5f417d5513 ("idpf: replace flow scheduling buffer ring with buffer pool")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ACPI driver currently prepares the per-socket metric table only
on HSMP_PROTO_VER6. With protocol version 7 in use on Family 1Ah
Model 50h-5Fh, userspace cannot reach the larger ~13 KB table:
hsmp_get_tbl_dram_base() is skipped, sock->metric_tbl_addr stays
NULL, and the ioctl added earlier in this series has nothing to read.
Widen the proto_ver gate in init_acpi() from '== HSMP_PROTO_VER6'
to '>= HSMP_PROTO_VER6' so the DRAM region is mapped and
sock->metric_tbl_size is populated on protocol version 7 (and any
future compatible version), making the ioctl path functional.
hsmp_metric_tbl_acpi_read() now returns -EOPNOTSUPP whenever the
running protocol version is not VER6, because the sysfs binary
attribute cannot carry a table larger than PAGE_SIZE. Version 7
userspace gets a clear, actionable error and a documented pointer to
HSMP_IOCTL_GET_TELEMETRY_DATA; version 6 userspace sees no change.
The non-ACPI plat.c path is intentionally left untouched: it covers
Family 1Ah Model 0h-Fh hardware fixed at protocol version 6, where
the existing metrics_bin remains the supported interface.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-6-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The metric table needs to be delivered to userspace as a single
atomic snapshot, but the current sysfs metrics_bin path is a file
read: userspace can read it in chunks and observe a torn snapshot
if an SMU refresh happens between read() calls. The same path is
also bounded by PAGE_SIZE, so the ~13 KB table used by HSMP protocol
version 7 on Family 1Ah Model 50h-5Fh cannot be returned at all,
regardless of how userspace reads it. Rather than extend sysfs to
lift both restrictions, expose the metric table through the
existing HSMP character device using a new ioctl that always copies
the table in one shot.
Add struct hsmp_telemetry_data and HSMP_IOCTL_GET_TELEMETRY_DATA
to the UAPI header. Under the surrounding #pragma pack(4), placing
the __u64 user pointer first gives a tight 16-byte layout that is
identical for 32- and 64-bit callers, and the trailing __u16
reserved field is rejected with -EINVAL if non-zero so future
kernels can repurpose it without breaking already-deployed
userspace. The command is encoded with _IOW because the kernel only
reads the request struct; the snapshot travels through the user
pointer it carries.
The requested size may be anything from one byte up to the size
firmware reported for that socket's table. A short request returns
the leading bytes of the snapshot, so userspace built against an
older table layout keeps working on firmware that grew the table,
mirroring the relaxed response_sz rule applied to HSMP messages
earlier in this series. A request larger than the firmware table is
rejected with -EINVAL rather than short-written, so a caller can
never mistake a partial copy for a full one.
Dispatch hsmp_ioctl() on the ioctl command: the existing message
handler is factored out as hsmp_ioctl_msg() for HSMP_IOCTL_CMD, and
HSMP_IOCTL_GET_TELEMETRY_DATA goes to a new
hsmp_ioctl_get_telemetry() helper.
/dev/hsmp is a singleton character device that outlives an
individual socket unbind, so an ioctl issued on an already-open fd
can run concurrently with socket teardown. hsmp_sock_rwsem is the
driver's contract for that: the data plane takes it for read, and
probe and remove take it for write to drain the data plane before
freeing the socket array, unmapping the metric tables and
destroying the per-socket mutexes. hsmp_ioctl_get_telemetry() takes
it for read across the socket lookup, the checks on that socket's
metric-table state and the table read itself, so none of that state
can be torn down underneath it. Without this the handler would
sleep in its kvmalloc() holding no lock at all, and could resume
with a freed socket, locking a destroyed mutex and reading from an
unmapped iomem region.
The lock is dropped before the copy_to_user(), because faulting in
the destination can block indefinitely on a userfaultfd-backed
buffer and would otherwise leave a socket unbind waiting for the
write lock.
Since hsmp_metric_tbl_read() reached the mailbox through
hsmp_send_message(), which takes hsmp_sock_rwsem itself, calling it
with the lock already held would recursively take the read side and
can deadlock against a queued writer. Split out
hsmp_metric_tbl_read_locked(), which asserts the lock and uses
hsmp_send_message_locked(), and leave hsmp_metric_tbl_read() as a
wrapper that takes the read lock for the sysfs callers. This also
brings the whole fill-and-copy under the rwsem for those callers,
where the memcpy_fromio() previously ran outside it, and makes the
lock order uniformly hsmp_sock_rwsem -> metric_read_lock ->
hsmp_sem.
The user-controlled socket index in HSMP_IOCTL_GET_TELEMETRY_DATA is
clamped with array_index_nospec() before indexing hsmp_pdev.sock[],
mitigating Spectre v1 (CVE-2017-5753). Include linux/nospec.h, which
the file relied on getting transitively.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-5-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver hard-codes the metric-table region size to
sizeof(struct hsmp_metric_table). That is correct for HSMP protocol
version 6 but mis-sizes the ioremap of the SMU DRAM region on newer
platforms: Family 1Ah Model 50h-5Fh exposes a ~13 KB table under
protocol version 7, and the table is expected to keep growing on
future firmware. The same hard-coded value also forces
hsmp_metric_tbl_read() to reject any read that follows the actual
firmware layout.
Pick up the table size from firmware instead. SMU on Family 1Ah
Model 50h and later populates HSMP_GET_METRIC_TABLE_DRAM_ADDR's
args[2] with the DRAM region size in bytes; older firmware leaves it
0. Bump the descriptor's response_sz to 3 so the field is read, and
store the result in the new per-socket hsmp_socket.metric_tbl_size,
which is then used both for the ioremap() of the region and as the
expected size in hsmp_metric_tbl_read().
The size is stored per socket rather than per platform because
hsmp_get_tbl_dram_base() runs once per socket and each socket maps
its own region. A single platform-wide field would let the last
socket's size be used to copy out of an earlier socket's smaller
mapping.
Bump DRIVER_VERSION to 2.6.
Behaviour on existing protocol-version-6 hardware is unchanged.
Reading a third response word is safe there: for this command SMU
leaves args[2] as 0 rather than a stale value from an earlier
mailbox transaction, so the fallback always applies, yielding the
same value as the previous hard-coded one, and both the ioremap and
the size check produce the same result as before.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-4-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As HSMP protocol versions evolve, existing message IDs sometimes
gain additional response words on newer firmware. validate_message()
currently enforces a strict equality (response_sz == table value)
for HSMP_SET and HSMP_GET, so userspace compiled against an earlier
descriptor table is rejected with -EINVAL when it asks for fewer
response words than the in-kernel table now declares - even though
that caller has no interest in the additional words. Only
HSMP_SET_GET already used a relaxed upper-bound check.
Replace the per-type branching with a single upper-bound check for
all message types. Userspace can now request fewer response words
than hardware provides, while requests that exceed the descriptor
table (and therefore the hardware capability) are still rejected.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-3-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Family 1Ah Model 50h-5Fh firmware exposes new HSMP messages (0x29-0x2A,
0x33-0x3A) for PC6/CC6 control, CCD power/thermal monitoring, DIMM
sideband access, floor- and SDPS-limit control, and command-enable
discovery. The same firmware extends three existing SET-only messages
(HSMP_SET_XGMI_LINK_WIDTH 0x0C, HSMP_SET_DF_PSTATE 0x0D,
HSMP_SET_PSTATE_MAX_MIN 0x22) with a read-back path selected by bit[31]
of args[0] (0 = set, 1 = get). Add the new IDs and convert the three
messages to HSMP_SET_GET.
Also add PQoS-related HSMP messages HSMP_PQOS_TRAFFIC_PRIORITY (0x3B)
and HSMP_PQOS_FLOATING_BW (0x3C) with matching hsmp_msg_desc_table[]
descriptors so userspace can reach the new functionality.
Backward compatibility is preserved on prior platforms: new IDs
previously occupied HSMP_RSVD slots, and existing userspace that leaves
bit[31] = 0 continues to take a pure SET path. Converting the three
SET messages to HSMP_SET_GET also keeps them accepted by
validate_message(), which already applies a relaxed upper-bound check
on response_sz for that type.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-2-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform_get_irq() and devm_request_irq() already print an error
message via dev_err_probe() on failure, so wrapping them with
another dev_err_probe() results in duplicate error output.
Return the error code directly instead.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/119b5f8e3ac68221307cbfcd227dc8546be0eaeb.1784527556.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In k1_spi_dma_one(), the TX DMA descriptor is submitted via
dmaengine_submit() before the RX descriptor is prepared. If
k1_spi_dma_prep() fails for RX, the function jumps to the fallback
path without terminating the already-submitted TX descriptor.
So terminate the TX channel with dmaengine_terminate_sync() when RX
descriptor preparation fails.
Fixes: efcd8b9d11 ("spi: spacemit: introduce SpacemiT K1 SPI controller driver")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/b402223ebff226782afd4c7da7db4ce34807f604.1784527556.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Update nvme host driver makefile to enable support for the Clang's
context anaysis.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
After adding Clang context annotations, compiling tcp.c reports the
following warning while context analysis is enabled:
drivers/nvme/host/tcp.c:2572:24: warning: passing pointer to variable 'list' requires holding mutex 'nvme_tcp_ctrl_mutex'
[-Wthread-safety-pointer]
2572 | if (list_empty(&ctrl->list))
| ^
The above warning is triggered because ctrl->list is guarded with mutex
nvme_tcp_ctrl_mutex but when list_empty(&ctrl->list) is invoked it
doesn't acquire nvme_tcp_ctrl_mutex.
Replace list_empty() with list_empty_careful(), which is intended
for lockless inspection of list heads during teardown when no concurrent
list modifications are expected. This suppresses the corresponding
Clang context analysis warning while preserving the existing behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The nvme_tcp_ctrl_list and nvme_tcp_ctrl::list are protected by
nvme_tcp_ctrl_mutex. Define nvme_tcp_ctrl_list using
LIST_HEAD_GUARDED(nvme_tcp_ctrl_list, nvme_tcp_ctrl_mutex) and
annotate nvme_tcp_ctrl::list using
__guarded_by(&nvme_tcp_ctrl_mutex) so that Clang's context analysis
can validate accesses against the corresponding locking requirements.
It is safe to initialize nvme_tcp_ctrl::list while allocating the
controller object because the list entry has not yet been added to
nvme_tcp_ctrl_list. Annotate the initialization with context_unsafe()
to suppress the corresponding Clang warning.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
After adding Clang lock context annotations in rdma.c, Clang reports
the following warning when context analysis is enabled:
drivers/nvme/host/rdma.c:972:24: warning: passing pointer to variable 'list' requires holding mutex 'nvme_rdma_ctrl_mutex'
[-Wthread-safety-pointer]
972 | if (list_empty(&ctrl->list))
| ^
The warning is triggered because ctrl->list is annotated as being
protected by nvme_rdma_ctrl_mutex, but list_empty(&ctrl->list) is
invoked without holding that mutex.
Replace list_empty() with list_empty_careful(), which is intended
for lockless inspection of list heads during teardown when no concurrent
list modifications are expected. This suppresses the corresponding
context analysis warning while preserving the existing behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
device_list and nvme_rdma_device::entry are protected by
device_list_mutex. Define device_list using
LIST_HEAD_GUARDED(device_list, device_list_mutex) and annotate
nvme_rdma_device::entry with __guarded_by(&device_list_mutex) so that
Clang's context analysis can validate accesses against the corresponding
locking requirements.
Similarly, nvme_rdma_ctrl_list and nvme_rdma_ctrl::list are
protected by nvme_rdma_ctrl_mutex. Define nvme_rdma_ctrl_list using
LIST_HEAD_GUARDED(nvme_rdma_ctrl_list, nvme_rdma_ctrl_mutex) and
annotate nvme_rdma_ctrl::list with __guarded_by(&nvme_rdma_ctrl_mutex).
It is safe to initialize nvme_rdma_ctrl::list while allocating the
controller object because the list entry has not yet been added to
nvme_rdma_ctrl_list. Annotate the initialization with context_unsafe()
to suppress the corresponding Clang context analysis warning.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_queue::sq_tail, nvme_queue::last_sq_tail and nvme_queue::sq_cmds
are protected by nvme_queue::sq_lock. Annotate each field with
__guarded_by(&sq_lock) and annotate helpers that access them with
__must_hold(&sq_lock) so that Clang's context analysis can validate
the locking requirements.
Access to nvme_queue::sq_tail used solely for tracing is annotated with
data_race(), as they only require a lockless snapshot of the value.
nvme_init_queue() initializes nvme_queue::sq_tail and
nvme_queue::last_sq_tail before the queue is published and thus do not
require nvme_queue::sq_lock protection. So annotate nvme_init_queue()
with context_unsafe() to suppress false positive context analyzer
warning.
nvme_free_queue() operate on queues which are no longer reachable, and
therefore do not require nvme_queue::sq_lock protection. Similarly,
nvme_alloc_sq_cmds() allocates memory for nvme_queue::sq_cmds for the
queue which is not yet published or in use and hence it's safe to
annotate all these helpers using context_unsafe.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The global nvmf_transports list is protected by nvmf_transports_rwsem
and the global nvmf_hosts list is protected by nvmf_hosts_mutex.
Define both lists using LIST_HEAD_GUARDED() so that Clang's context
analysis can validate accesses to the lists against the corresponding
locking requirements.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The global nvme_subsystems list, nvme_subsystem::entry,
nvme_subsystem::ctrls, and nvme_ctrl::subsys_entry are protected by
nvme_subsystems_lock. Annotate these objects with
__guarded_by(&nvme_subsystems_lock) so that Clang's context analysis
can validate accesses to them.
__nvme_find_get_subsystem() and nvme_validate_cntlid() traverse the
global subsystem list and subsystem controller list and therefore
require callers to hold nvme_subsystems_lock. Annotate both helpers
with __must_hold(&nvme_subsystems_lock).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_parse_ana_log() accesses ANA state protected by ctrl->ana_lock and
therefore requires callers to hold the lock.
Annotate nvme_parse_ana_log() with __must_hold(&ctrl->ana_lock) so that
Clang's lock context analysis can verify the locking requirement at
compile time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Several helpers access or traverse data structures protected by
nvme_subsystem::lock and therefore require callers to hold the lock.
Annotate nvme_mpath_unfreeze(), nvme_mpath_wait_freeze(),
nvme_mpath_start_freeze(), nvme_find_ns_head(), nvme_alloc_ns_head()
and nvme_subsys_check_duplicate_ids() with __must_hold(&subsys->lock)
so that Clang's lock context analysis can validate the locking
requirements at compile time.
Also annotate nvme_subsystem::nsheads and
nvme_ns_head::delayed_removal_secs with __guarded_by(&subsys->lock),
as both are protected by the subsystem lock.
Annotate nvme_init_subsystem() with __context_unsafe(), as it
initializes these lock-protected members before the object is published,
suppressing a false positive from Clang's context analysis.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_ns_head is allocated with kzalloc(), so explicitly initializing
nvme_ns_head::delayed_removal_secs to 0 in nvme_mpath_alloc_disk() is
redundant.
Removing the redundant initialization also avoids a false positive from
Clang's context analysis once nvme_ns_head::delayed_removal_secs is
annotated with __guarded_by(nvme_subsystem::lock).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_setup_io_queues_trylock() conditionally acquires dev->shutdown_lock
using mutex_trylock(). The function returns 0 when the lock is
successfully acquired and a negative error code otherwise.
Annotate the function with __cond_acquires(0, &dev->shutdown_lock) so
that Clang's lock context analysis can track the lock state based on
the return value and verify correct lock usage at call sites.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Annotate nvme_ns_head::current_path[] with __rcu_guarded so that
Clang's context analysis can validate accesses to the SRCU/RCU
protected pointer.
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_ns_head::requeue_list is protected by
nvme_ns_head::requeue_lock. Annotate requeue_list with
__guarded_by(&requeue_lock) so that Clang's context analysis can
validate accesses to the list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
bio_list_init() is a no-op for zero-initialized objects. Remove the
redundant initialization of nvme_ns_head::requeue_list from
nvme_mpath_alloc_disk().
Besides simplifying the code, this also avoids a false positive from
Clang's context analysis once nvme_ns_head::requeue_list is annotated
with __guarded_by(&requeue_lock).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add Clang lock context annotations for helpers that operate under
head->srcu read-side protection.
The path selection helpers invoked by nvme_find_path() access SRCU-
protected data through srcu_dereference() or list APIs which iterate
through rcu protected list and therefore require the caller to hold
head->srcu. Annotate these helpers and nvme_find_path() with
__must_hold_shared(&head->srcu) so that Clang's lock context analysis
can verify the SRCU locking requirements across the call chain.
Also update nvme_ns_head_ctrl_ioctl() to use __releases_shared()
to match the shared SRCU read-side lock acquired through
srcu_read_lock().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Annotate nvme_passthru_start() and nvme_passthru_end() for Clang
context/thread-safety analysis.
The __cond_acquires() and __cond_releases() annotations model
conditional lock acquisition and release based on a function's return
value. Use a nonzero return value as the abstract condition denoting
that the associated locks have been acquired or released.
This allows the analyzer to track the lock state across the
nvme_passthru_start() / nvme_passthru_end() pair and verify correct
locking semantics.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Change nvme_passthru_end() to return the command effects value passed
to it.
This is a preparatory change for Clang's context/thread-safety analysis
support. The conditional release annotations (__cond_releases()) model
lock release based on a function's return value. Returning the existing
effects value allows a subsequent patch to annotate nvme_passthru_end()
as conditionally releasing locks acquired by nvme_passthru_start().
No functional change intended.
A follow-up patch will add the corresponding context analysis
annotations.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
With Context Analysis (viz. Clang's Thread Safety Analysis), list_heads
that are __guarded_by(..) require holding the appropriate context lock
when accessing and manipulating them via the list API. Because Clang's
warning diagnostics do not perform inter-procedural analysis, this is
enforced by Clang with -Wthread-safety-pointer in the caller at the call
boundary; a warning is produced when passing a pointer to a guarded
variable without holding the appropriate context locks:
warning: passing pointer to variable 'list' requires holding [...] [-Wthread-safety-pointer]
if (list_empty(&ctrl->list))
An exception is list_empty_careful(), which is like list_empty(), except
that it is permitted to use without holding any context lock (carefully).
Mark list_empty_careful() __context_unsafe, which disables context
analysis within list_empty_careful(), but also suppresses warnings
generated in callers related to its pointer arguments.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Introduce LIST_HEAD_GUARDED(name, lock) to define a struct list_head
annotated with __guarded_by(lock). This provides a convenient shorthand
for defining lock-protected list heads and allows compiler context
analysis to validate accesses to the list against the associated lock.
The new helper also reduces boilerplate and improves consistency across
callers that annotate struct list_head objects with __guarded_by().
This is a preparatory change for subsequent patches that annotate
LIST_HEAD() instances with their protecting lock.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits
the descriptors, which makes the controller execute the command
immediately. For SPINAND_SET_FEATURE the value to be written is only
placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a
second submission - so the chip is programmed with whatever that register
happened to hold from a previous operation, and the intended value is only
applied by the *next* SET_FEATURE.
Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing
0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the
subsequent write of 0x00 leaves it at 0x40 - every write lands one
operation late.
This stayed unnoticed until v6.18 added SPI-NAND OTP support together
with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode,
reads, and disables it again, and mtd_otp_nvmem_add() does this during
MTD registration. With the off-by-one, the "disable" write actually
applies the previously requested value, so CFG_OTP_ENABLE ends up set:
the chip stays in OTP mode, every subsequent array read returns the OTP
area instead of the array (UBI reports an empty device) and all writes
fail with -EIO because the OTP area is write protected. On this board
that makes the whole flash unusable and the device unbootable.
Write the feature value into NAND_FLASH_FEATURES as part of the same
transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the
operation actually carries - the previous code dereferenced a 4-byte
pointer on a one-byte buffer (spinand->scratchbuf).
With this patch the flash contents read back bit-identical to a
known-good dump of the same board taken under the vendor firmware
(md5-verified across partitions), and writes work.
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Pal <kuncy7@gmail.com>
Reviewed-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260727163216.109938-1-kuncy7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 610fa91d98 ("PCI: imx6: Assert PERST# before enabling regulators")
introduced a boot hang on i.MX6Q/DL variants by reordering
imx_pcie_host_init() to call imx6q_pcie_enable_ref_clk() (which powered up
the PHY) before imx6q_pcie_core_reset() (which powered it back down).
Before 610fa91d98, the sequence was:
1. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set
REF_CLK_EN
2. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN
3. Link training starts with PHY powered up (TEST_PD cleared)
4. Link training succeeds
After 610fa91d98, the sequence became:
1. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN
2. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set
REF_CLK_EN
3. imx_pcie_deassert_core_reset() - does nothing
4. Link training starts with PHY powered down (TEST_PD set)
5. Link training fails and boot hangs when PHY register accesses hang
To fix this:
- Remove TEST_PD PHY power control from imx6q_pcie_enable_ref_clk()
- Remove REF_CLK_EN control from imx6q_pcie_core_reset()
- Add TEST_PD PHY power control to imx6qp_pcie_core_reset(), which
previously relied on imx6q_pcie_enable_ref_clk() to power up the PHY by
clearing TEST_PD
- Clear TEST_PD to power on PHY in imx_pcie_deassert_core_reset()
These changes together ensure the correct sequence:
1. REF_CLK_EN set in clk_enable() (TEST_PD untouched)
2. TEST_PD set in assert_core_reset() (PHY power off)
3. TEST_PD cleared in deassert_core_reset() (PHY power on)
4. Link training starts with proper PHY state
The i.MX6Q/DL PCIe PHY requires approximately 120us between TEST_PD
de-assertion and link training start. Add usleep_range(200, 500) in
imx6q_pcie_core_reset() after clearing TEST_PD to satisfy this requirement.
Add explicit imx_pcie_assert_core_reset() calls in error paths and
host_exit() to ensure no power leak.
Fixes: 610fa91d98 ("PCI: imx6: Assert PERST# before enabling regulators")
Reported-by: Leonardo Costa <leoreis.costa@gmail.com>
Closes: https://lore.kernel.org/lkml/20260629143439.361560-1-leoreis.costa@gmail.com/
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Leonardo Costa <leonardo.costa@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728035159.2702021-1-hongxing.zhu@oss.nxp.com
This USB Audio device (0x1e0b:0xd01e) exhibits audio stuttering
during boot when playing audio. Once the system is fully booted,
playback is normal.
The device reports its isochronous endpoints with the Asynchronous
sync type (bmAttributes = 0x03), which causes the driver to
calculate nurbs = min(max_urbs, ...) = 3, providing only ~16ms
of buffering. During boot, the higher system scheduling jitter
(e.g., from init scripts, device enumeration, and driver probing)
can exceed this buffer depth, causing audible stuttering.
This patch adds a device-specific quirk (QUIRK_FLAG_PLAYBACK_URB_FIXUP)
that applies two changes for this device:
1. Forces nurbs to MAX_URBS (12), providing sufficient buffering
2. Sets URB_ISO_ASAP flag for more consistent xHCI scheduling
Both changes are required together for stable boot-time playback:
- The larger buffer absorbs scheduling jitter during boot
- URB_ISO_ASAP ensures consistent URB submission timing, preventing
the xHCI scheduler from introducing variable delays
Test methodology:
- Without patch: reboot and play audio → stuttering audible in all
tests (reproduced consistently across multiple attempts)
- With nurbs=8 only: occasional minor stuttering observed after
multiple tests (insufficient buffer depth)
- With full patch (nurbs=12 + URB_ISO_ASAP): reboot and play audio
→ no stuttering observed (tested in 10+ reboot cycles without
reproducing the issue)
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260728111309.1271834-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add USB mixer mapping quirk for later revisions of the Corsair Virtuoso
headset with USB IDs 0x1b1c:0x0a43 (wired) and 0x1b1c:0x0a44
(wireless). These devices exhibit the same mixer label collision as
earlier Virtuoso variants: all controls are labelled "Headset", causing
applications like PulseAudio to move the sidetone control instead of
the main playback volume.
Signed-off-by: Robert Abrahamse <denobyte2@gmail.com>
Link: https://patch.msgid.link/20260728140314.11601-1-denobyte2@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_drain() on a linked stream parks an on-stack wait entry on the
drained peer's runtime->sleep, and after schedule_timeout() removes it
only if that peer is still found in the caller's group. If group
membership changes during the wait and the sleep ends by signal or
timeout (so autoremove_wake_function() does not run), finish_wait() is
skipped and snd_pcm_drain() returns with the entry still queued on that
stream's sleep list; a later wake_up() then walks a freed stack frame.
This is reachable by unlinking either the drained or the draining stream.
Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()),
snd_pcm_unlink() never wakes the sleep queues. Wake every group member
under the group lock before the membership change, so a linked drainer is
released and drops its entry while the streams are still grouped.
The window was opened when snd_pcm_link_rwsem stopped being held across
the wait and the removal became conditional on group membership (see
Fixes). The later switch to finish_wait() kept that conditional removal,
so the signal/timeout case remained.
Fixes: f57f3df03a ("ALSA: pcm: More fine-grained PCM link locking")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/A0705100-D10B-4286-9980-0142ABEEAD51@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently there is a TOCTOU issue in new_id_store() as the dyn ID insertion
in pci_add_dynid() and the pci_match_device() are in separate critical
sections.
Fix this by moving the existing ID check to inside pci_add_dynid() and only
check against the static ID table outside the critical section.
Fixes: 3853f9123c ("PCI: Avoid duplicate IDs in driver dynamic IDs list")
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260723-pci_id_fix-v4-8-3580726844e1@garyguo.net
PCI dynamic ID needs to match IDs against a new ID to see if it already
exists. Existing APIs can only match IDs against devices, so the dynamic ID
insertion code creates a temporary device only for matching purposes.
Rename pci_match_one_device() to pci_match_one_id() so it can be used for
this purpose instead; add a pci_id_from_device() helper to make it easy to
convert users.
Similarly, convert pci_match_id() to do_pci_match_id(). But keep the
existing API because there are many users.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260723-pci_id_fix-v4-7-3580726844e1@garyguo.net
Address of pci_device_id cannot be relied on due to presence of dynamic ID
and driver_override. Use driver_data instead.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260723-pci_id_fix-v4-6-3580726844e1@garyguo.net
Address of pci_device_id cannot be relied on due to presence of dynamic ID
and driver_override. Use driver_data instead.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260723-pci_id_fix-v4-5-3580726844e1@garyguo.net
