While booting with KHO, the following crash was observed:
BUG: unable to handle page fault for address: ff19164fffff8328
RIP: 0010:__free_one_page+0x1a1/0x6b0
Call Trace:
<TASK>
[<ffffffff913208bf>] free_one_page+0xaf/0x240
[<ffffffff93973288>] deferred_free_pages+0xa8/0xd0
[<ffffffff93971b4f>] deferred_init_memmap_chunk+0x10f/0x1b0
[<ffffffff9396e265>] padata_mt_helper+0x65/0xa0
[<ffffffff90fac402>] process_scheduled_works+0x202/0x410
[<ffffffff90fae739>] worker_thread+0x1f9/0x2d0
[<ffffffff90fb62fd>] kthread+0x27d/0x2f0
[<ffffffff90fae540>] ? __pfx_worker_thread+0x10/0x10
[<ffffffff90fb6080>] ? __pfx_kthread+0x10/0x10
[<ffffffff90efdc55>] ret_from_fork+0x145/0x280
[<ffffffff90fb6080>] ? __pfx_kthread+0x10/0x10
[<ffffffff90e2e46a>] ret_from_fork_asm+0x1a/0x30
</TASK>
deferred_init_memmap_chunk() interleaves initialization of struct pages
with freeing them. This works fine without KHO because free regions
will never be buddy neighbors. However, with KHO, free memory will be split
into (free && scratch) and (free && !scratch), that can be buddy neighbors.
KHO scratch is aligned to CMA_MIN_ALIGNMENT_PAGES pages but buddy looks
at the neighborhood of MAX_ORDER_NR_PAGES pages. These values are
configurable but CMA_MIN_ALIGNMENT_PAGES is always less or equal to
MAX_ORDER_NR_PAGES. In the crashing configuration they were set as
follows:
CMA_MIN_ALIGNMENT_PAGES = 1 << 9
MAX_ORDER_NR_PAGES = 1 << 10
So while freeing one chunk, buddy accessed uninitialized struct pages
from another chunk, tried to merge the blocks and crashed.
To fix this, let's just align KHO scratch to MAX_ORDER_NR_PAGES pages.
Fixes: c6073743d0 ("kho: make preserved pages compatible with deferred struct page init")
Signed-off-by: Michal Clapinski <mclapinski@google.com>
Link: https://patch.msgid.link/20260717134028.2880508-1-mclapinski@google.com
[rppt: massaged the changelog]
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5 ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files.
Fixes: cab056f2aa ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260528174140.1921129-3-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Increment the outgoing FLB refcount in liveupdate_flb_get_outgoing() so
that the FLB structure cannot be freed while the caller is actively
using it. Add an additional liveupdate_flb_put_outgoing() function so
the caller can explicitly indicate when it is done using the outgoing
FLB.
During a Live Update, the kernel may need to fetch the outgoing FLB
outside of the scope of a file handler's preserve() and unpreserve()
callbacks. In that situation there is no way for the caller to protect
itself against the outgoing FLB from being freed while it is using it.
Incrementing the reference count in liveupdate_flb_get_outgoing()
ensures it cannot be freed.
This change also aligns the outgoing FLB lifecycle management with the
incoming FLB, since the latter uses the same get/put semantics.
Fixes: cab056f2aa ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260528174140.1921129-2-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The UAPI documents liveupdate_session_finish::reserved as requiring zero,
but luo_session_finish() currently ignores it and finishes the session.
Accepting nonzero values prevents the field from being safely repurposed
by a future extension.
Reject nonzero reserved values before changing session state, matching
LIVEUPDATE_SESSION_GET_NAME.
Fixes: 16cec0d265 ("liveupdate: luo_session: add ioctls for file preservation")
Assisted-by: Codex:gpt-5.6-sol
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://patch.msgid.link/20260716012607.22020-2-liu.yun@linux.dev
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Currently, PINCTRL_S32G2 selects PINCTRL_S32CC which needs GPIOLIB, without
selecting or depending on GPIOLIB.
However, other similar options in this subsystem actually select GPIOLIB
instead of depending, so I think we can do the same here.
This unmet dependency was found by kconfirm, a static analysis tool for
Kconfig.
Fixes: 94cb9e8f27 ("pinctrl: s32cc: implement GPIO functionality")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Commit 6e3b067d3c ("arm64: dts: mediatek: mt7622: Align GPIO hog
name with bindings") renamed the asm_sel GPIO hog to asm-sel-hog to
follow the GPIO hog naming convention, but the mt7622 pinctrl binding
only allows child nodes matching '-pins(-[a-z]+)?$', causing a
dtbs_check warning:
mt7622-bananapi-bpi-r64.dtb: pinctrl@10211000 (mediatek,mt7622-pinctrl):
'asm-sel-hog' does not match any of the regexes:
'-pins(-[a-z]+)?$', '^pinctrl-[0-9]+$'
Allow gpio-hog nodes in the pinctrl node, following the same pattern
as commit 9322da935c ("dt-bindings: pinctrl: mt7988: allow
gpio-hogs").
Signed-off-by: Chen-Yu Yeh <chenyou910331@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with
.is_generic = true, but that field is only present when
CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h).
The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF,
so any config that enables CONFIG_PINCTRL_BM1880=y without
CONFIG_GENERIC_PINCONF=y fails to compile:
drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Add the missing select to fix the build.
Fixes: 49bd61ebce ("pinctrl: Add pinconf support for BM1880 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
commit 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
introduced a regression where Wake-on-LAN no longer works after suspend
or shutdown on some AMD platforms.
Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI
PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake
sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME
does not use GPIO IRQ infrastructure and relies on firmware configuration.
The original intent of commit 6bc3462a0f ("pinctrl: amd: Mask wake
bits on probe again") was to clear spurious wake bits left by firmware
to prevent unwanted wakeups. However, S4 wake bits are used for
hardware-level wake sources like WoL that bypass the kernel's IRQ wake
API.
Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits:
- Firmware-configured S4 wake sources (WoL) continue working
- Kernel maintains control of S3/S0i3 wake policy via set_wake()
- S3-only wake sources work correctly per commit f31f33dbb3 ("pinctrl:
amd: Take suspend type into consideration which pins are non-wake")
The trade-off is that firmware-programmed spurious S4 wake bits remain
set, but this is less problematic than breaking WoL.
Fixes: 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver calls ocelot_regmap_from_resource() via <linux/mfd/ocelot.h>,
which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO.
The Kconfig entry does not select REGMAP_MMIO, causing a build failure
when no other driver in the config happens to pull in REGMAP_MMIO:
include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Fixes: 2afbbab45c ("pinctrl: microchip-sgpio: update to support regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure.
Fixes: be4c60b563 ("pinctrl: devicetree: Avoid taking direct reference to device name string")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation.
Fixes: 37745918e0 ("ALSA: timer: Introduce virtual userspace-driven timers")
Cc: <stable@vger.kernel.org>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/DF8A3844-AD5E-4B8A-9CFC-BD83C212BA38@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, and consume only complete
status-tail addresses.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260720115018.75045-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=m0rQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix a ublk recovery hang, where END_USER_RECOVERY without a
successful START_USER_RECOVERY could be satisfied by a stale
completion latch
- Fix a stack out-of-bounds read in the CDROMVOLCTRL ioctl
- MAINTAINERS email address update for Roger Pau Monne
* tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: update my email address
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
ublk: wait on ublk_dev_ready() instead of ub->completion
-----BEGIN PGP SIGNATURE-----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=pQDU
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a missing ERESTARTSYS conversion in the read paths, which got
messed up back when some code consolidation was done for read
multishot support
- zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of
"event" for consistency and to be less ambiguous for users. This was
added for 7.2, so let's rename it while we still can. No functional
or code changes, just a strict rename
* tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: rename notif to event
io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS
io_uring/zcrx: drop "notif" from stats struct names
io_uring/rw: fix missing ERESTARTSYS conversion in read paths
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state.
Fixes: e704eff3ff ("ftrace: Have set_graph_function handle multiple functions in one write")
Fixes: 689fd8b65d ("tracing: trace parser support for function and graph")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260725024721.1983675-1-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it
again. (Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);'
would pass even if 'global_func' argument was marked nonnull.
(Amery Hung)
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRINyQBqoQUC24dy5htleuBPyPTXgUCamPsBwAKCRBtleuBPyPT
Xo/uAP0YR6/9em1W/sZnss6Wkwfwd9NdmmlrJqSlt7aq+A+W7AD/V5HbigM4pJ76
CZFkKvnzhhU3dSXm/dBT1/GGJbL4pwo=
=uzKM
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Eduard Zingerman:
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it again
(Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);' would
pass even if 'global_func' argument was marked nonnull (Amery Hung)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
selftests/bpf: Test passing scalar NULL to nonnull global subprog
bpf: Reject passing scalar NULL to nonnull arg of a global subprog
RTL8211F require at least 50ms deassert to guarantee the register
access, 10ms is only enough for the PHY reset.
Fixes: cfe5c91cb7 ("riscv: dts: spacemit: k3: Initial support for CoM260-IFX board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://patch.msgid.link/20260710063314.1030249-2-inochiama@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
RTL8211F require at least 50ms deassert to guarantee the register
access, 10ms is only enough for the PHY reset.
Fixes: 74657a3769 ("riscv: dts: spacemit: Add ethernet device for K3")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Tested-by: E Shattow <e@freeshell.de>
Link: https://patch.msgid.link/20260710063314.1030249-1-inochiama@gmail.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe.
Fixes: 8be193c7b1 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260721055551.1714965-1-lilinmao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the Texas Instruments TPS65217 and TPS65218 Power Button
bindings to DT schema.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260723100605.628882-4-egbostina@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
charlieplex_keypad_scan_line() currently ignores the return value of
gpiod_direction_output() when setting the active output line for scanning.
If setting the GPIO direction fails (e.g. on I2C/SPI GPIO expanders or
hardware errors), the function continues to sleep and read input values
from an improperly configured GPIO line.
Fix this by capturing the return value of gpiod_direction_output() and
returning the error code immediately if it fails.
Fixes: 2ca45e57ea ("Input: charlieplex_keypad - add GPIO charlieplex keypad")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260723022943.9337-1-kr494167@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The firmware record parser checks that the record address starts within
the programmable map, but does not check that the complete record data
fits in that map. A record near the end of the map can therefore make
the copy to pmap exceed its destination span.
Check the record length against the remaining programmable map range
before copying the record data.
Fixes: 7b5bb55d0d ("Input: add support for Azoteq IQS550/572/525")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260715083850.32155-1-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
TI BQ25630 is a battery charger that is I2C controlled. Despite its
model name, it is rather different from the other devices in the BQ256xx
family; it has a completely different register layout and some other
additional functionality (see the datasheet for more details [1]).
The most "annoying" thing is that it has two different register lengths:
8-bit and 16-bit. Moreover, the 16-bit registers are further partitioned
into either being little- or big-endian... Luckily, `regmap` has support
for multiple `regmap_config`s (by setting unique names). Therefore, use
three different `regmap_config`s for the corresponding registers. ADC
functionality has been left out, due to it not having any real-world
use-cases.
The `enum power_supply_property` values are straightforward to map. Some
properties are clamped (e.g. voltage/current ranges). Common
`bq25630_read/write_limit()` functions for this are therefore suitable.
Interrupts are sent whenever a state change is detected. Save the state
status registers in `bq25630_data` and `memcmp()` this in order to
decide if `power_supply_changed()` should be called or not. The actual
state values are in (and fetched from) the other
`power_supply_property`-mapped registers.
[1] https://www.ti.com/lit/gpn/bq25630
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/ca5228dc74705adf96f0af5363ccb65bb965640b.1782683551.git.waqar.hameed@axis.com
[Set power-supply type to POWER_SUPPLY_TYPE_USB]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=5ouZ
-----END PGP SIGNATURE-----
Merge tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects.
Fixes: 718a18a0c8 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260722191925.2192070-1-matt@readmodwrite.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As noted by Marco Elver:
rcu_read_lock_trace()
....
t->trc_reader_scp = __srcu_read_lock_fast(&rcu_tasks_trace_srcu_struct);
<interrupt>
rcu_read_unlock_trace()
< ... var decls only ... >
scp = t->trc_reader_scp;
This constitutes a data race between these two accesses to
t->trc_reader_scp. If rcu_read_lock_trace() were to tear its store,
this value would be corrupted.
This commit therefore defers the rcu_read_lock_untrace() function's
load from t->trc_reader_scp until after it has verified that this is
the outermost rcu_read_unlock_trace(). With this change, the interrupt
handler increments and decrements t->trc_reader_nesting and does not
access t->trc_reader_scp, thus avoiding the data race.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add 'P' flag to the diagnostic line to indicate whether any per-cpu
rtpcp's lazy_timer is pending. this helps diagnose stalls where
rcu-task callbacks are queued but the kthread stay sleep because
the lazy_timer has not yet fired and no grace period has started.
The output is as follows:
[ 31.319540][ T77] call_rcu_tasks() has failed boot-time tests.
[ 31.320205][ T77] rcu_tasks: RTGS_WAIT_CBS(11) since 7518 g:4 i:0 kCuUP l:150000
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
bq25890_fw_probe() acquires a reference to a secondary charger using
power_supply_get_by_name(), but the reference is not released on later
probe failures or on driver detach.
In particular, failures after bq25890_fw_probe() returns successfully,
such as a failure in bq25890_hw_init(), also leak the reference.
Register a device-managed cleanup action immediately after acquiring
the secondary charger. This releases the reference on all subsequent
probe failures and on driver detach.
Found by code review.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Cc: stable@vger.kernel.org
Fixes: d54bf877fd ("power: supply: bq25890: Add support for having a secondary charger IC")
Link: https://patch.msgid.link/20260722044416.1623621-1-make_ruc2021@163.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit updates the comment "We can't create the thread unless
interrupts are enabled." from 'commit 4929c913bd ("rcu: Make
call_rcu_tasks() tolerate first call with irqs disabled")' to be more
clear and also to cover deferred wakeup and to take into account the fact
that kthread creation has been move to core_initcall() time by 'commit
c63eb17ff0 ("rcu: Create call_rcu_tasks() kthread at boot time")'.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the rdp->rcu_cpu_has_work field is accessed only by the
corresponding CPU, it can be accessed by both interrupt handlers via
invoke_rcu_core_kthread() and at task level via rcu_cpu_kthread().
This means that we need this_cpu_read() rather than __this_cpu_read(),
this_cpu_write() rather than __this_cpu_write(), and READ_ONCE()
rather than plain C-language loads. The exception is the boot-time
rcu_spawn_core_kthreads(), which cannot race with kthreads that have
not yet been spawned.
This commit therefore makes it so.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Ever since the kvfree_rcu() tracing moved out of the callback-enqueue
path, rcutree_enqueue() no longer looks at the callback function
pointer: By the time it is invoked, __call_rcu_common() has already
stored the function into rhp->func, and the enqueue path only adds
the rcu_head to the segmented callback list and emits tracepoints
that do not take the function pointer.
Nevertheless, the function pointer is still threaded through
call_rcu_core(), call_rcu_nocb(), and rcutree_enqueue(), forcing
each level to carry a dead argument.
Remove the parameter from all three functions, from the no-CBs stub,
and from the corresponding declarations. Anything needing the
callback function can still get it from rhp->func.
No functional change.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->expedited_need_qs counter was part of the old expedited
grace-period machinery that spun waiting for each CPU to check in.
The current implementation instead tracks holdout CPUs via the
rcu_node structures' ->expmask fields and waits on the ->exp_wq[]
wait queues, so nothing reads or writes ->expedited_need_qs any
longer.
Remove the field to avoid wasting space in rcu_state and to keep
readers of the expedited code from searching for nonexistent users.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently raw_cpu_write() is used to clear the ->rcu_need_heavy_qs
field of the per-CPU rcu_data structure. However, on x86 this is a
normal assignment, which does not play well with concurrent accesses.
This commit therefore upgrades the uses of raw_cpu_write() to its
concurrency-safe counterpart WRITE_ONCE() of an rdp pointer obtained
from this_cpu_ptr(&rcu_data).
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently __this_cpu_read() and __this_cpu_write() is used to access the
->cpu_no_qs.b.exp field of the per-CPU rcu_data structure. However,
this can fail when the accesses can happen in interrupt handlers, as
recently started being exercised by rcutorture. This commit therefore
upgrades the uses of __this_cpu_read() and __this_cpu_write() to their
interrupt-safe counterparts this_cpu_read() and this_cpu_write().
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add nexp and exp_interval parameters to rcuscale that spawn kthreads
running synchronize_rcu_expedited() in a loop. This generates concurrent
expedited GP load while the normal writers measure GP or callback
latency.
When combined with gp_async=1 (which uses call_rcu() for writers), this
tests how effectively callbacks benefit from expedited grace periods.
With RCU callback expedited GP tracking, the async callbacks should
complete faster because they piggyback on the expedited GPs rather than
waiting for normal GPs.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Even when rcu_pending() triggers rcu_core(), the normal callback
advancement path through note_gp_changes() -> __note_gp_changes() bails
out when rdp->gp_seq == rnp->gp_seq (no normal GP change). Since
expedited GPs do not update rnp->gp_seq, rcu_advance_cbs() is never
called and callbacks remain stuck in RCU_WAIT_TAIL.
Add a direct callback advancement block in rcu_core() that checks for GP
completion via rcu_segcblist_nextgp() combined with
poll_state_synchronize_rcu_full(). When detected, trylock rnp and call
rcu_advance_cbs() to move completed callbacks to RCU_DONE_TAIL. Wake the
GP kthread if rcu_advance_cbs() requests a new grace period.
Uses trylock to avoid adding contention on rnp->lock. If the lock is
contended, callbacks will be advanced on the next tick.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
rcu_pending() decides whether rcu_core() should run on the current CPU's
timer tick. It does not account for expedited grace periods: after an
expedited GP completes, a non-offloaded CPU's callbacks remain in
RCU_WAIT_TAIL (not yet advanced to RCU_DONE_TAIL) and rcu_core() is
never invoked to advance them.
Detect that case via rcu_segcblist_nextgp() combined with a new
memory-ordering-free poll variant,
poll_state_synchronize_rcu_full_unordered(). This keeps rcu_pending()
cheap: it runs on every tick that has pending callbacks, so it must
not pay for the two memory barriers in
poll_state_synchronize_rcu_full(). The check is only a hint to run
rcu_core(); the ordered re-check and the actual callback advancement
happen there.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When an expedited grace period completes, rcu_exp_wait_wake() wakes
waiters on rnp->exp_wq[] but does not notify the NOCB rcuog kthreads. An
rcuog kthread that is waiting for a grace period sleeps on the leaf
rcu_node's ->nocb_gp_wq[] with a wait condition based on the grace-period
state, so without a wakeup, callbacks on offloaded CPUs that could
benefit from the expedited GP wait until the rcuog kthread wakes for some
other reason (e.g. the next normal GP or a timer).
Make the rcuog grace-period wait honour expedited GPs and wake it when
one completes:
- nocb_gp_wait() now records the grace period to wait for as a struct
rcu_gp_seq (both normal and expedited), tracks the earliest pending
normal and expedited sequence across the group, and releases the wait
via poll_state_synchronize_rcu_full() so it wakes for whichever
completes first. ->nocb_gp_seq is widened to struct rcu_gp_seq
accordingly.
- rcu_exp_wait_wake() calls the new rcu_nocb_exp_cleanup() on leaf
nodes, which wakes both ->nocb_gp_wq[0] and ->nocb_gp_wq[1] (the
expedited sequence does not share parity with the normal ->gp_seq the
waiter indexed with). Both this path and rcu_nocb_gp_cleanup() use
the shared rcu_nocb_cleanup_wake() helper, which checks swait_active()
first; the smp_mb() in rcu_gp_cleanup()/rcu_exp_wait_wake() orders the
grace-period state update before that check.
A stub rcu_nocb_exp_cleanup() is provided for CONFIG_RCU_NOCB_CPU=n.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Update documentation comments throughout the RCU callback infrastructure
to reflect the transition from a single grace-period sequence number to
the full struct rcu_gp_seq that tracks both normal and expedited grace
periods.
The ->gp_seq[] array documentation in rcu_segcblist.h is updated to
describe dual (normal and expedited) GP tracking. The
rcu_segcblist_advance(), rcu_segcblist_accelerate(), and
rcu_advance_cbs() comments are updated to refer to the struct rcu_gp_seq
state (gsp) instead of the old bare grace-period sequence number (seq).
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, RCU callbacks only track normal grace-period sequence
numbers. This means callbacks must wait for normal grace periods to
complete even when expedited grace periods have already elapsed.
Use the full struct rcu_gp_seq (which tracks both the normal and
expedited grace-period sequences) throughout the callback
infrastructure.
rcu_segcblist_advance() now checks both normal and expedited GP
completion via poll_state_synchronize_rcu_full(), and becomes
parameterless since it reads the grace-period state internally.
rcu_segcblist_accelerate() stores the full state (both sequences)
instead of just the normal one. rcu_accelerate_cbs() and
rcu_accelerate_cbs_unlocked() use get_state_synchronize_rcu_full() to
capture both sequences, and the NOCB advance checks use
poll_state_synchronize_rcu_full() instead of comparing only the normal
sequence.
srcu_segcblist_advance() becomes a standalone implementation because it
compares SRCU sequences directly and cannot use
poll_state_synchronize_rcu_full(), which reads RCU-specific globals.
srcu_segcblist_accelerate() sets the ->exp field to
RCU_GET_STATE_NOT_TRACKED so that poll_state_synchronize_rcu_full()
compares only ->norm and ignores ->exp.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect
straight from the ff_effect the user passed to EVIOCSFF, without
requiring it to hold anything:
work_data.custom_data = memdup_array_user(periodic->custom_data,
periodic->custom_len,
sizeof(s16));
work_data.custom_len = periodic->custom_len;
The driver then reads two words out of that buffer: custom_data[0] as the
waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the
index within the bank in cs40l50_effect_index_set(). Neither read is
covered by a length check, and custom_len is fully user controlled:
- custom_len == 0 makes memdup_array_user() call memdup_user() with a
length of zero, which returns ZERO_SIZE_PTR rather than an error, so
custom_data[0] dereferences it.
- custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps
effect->type out of the OWT case, and custom_data[1] is then read one
word past the allocation.
The bank value itself is also mishandled. It is masked with
CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a
custom_data[0] of 0x8000 or above wraps to a negative value that passes
the "bank_type >= CS40L50_WVFRM_BANK_NUM" test.
cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the
switch statement's default case gets a chance to reject it:
base_index = vib->dsp.banks[effect->type].base_index;
max_index = vib->dsp.banks[effect->type].max_index;
Require the two words the driver reads to be present, and hold the masked
bank in a u32 so the existing upper-bound test covers the whole range.
The da7280 haptic driver already range checks custom_len this way.
Fixes: c38fe1bb5d ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260718074032.1864861-1-sammiee5311@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list.
Fixes: 39df232f1a ("[PKTGEN]: fix device name handling")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260719145740.2888967-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
