Several fields in struct ppp can be read or updated concurrently
from multiple CPUs without synchronization, causing data races:
1. ppp->mru is read concurrently in ppp_receive_nonmp_frame() while
being updated via PPPIOCSMRU ioctl. Protect ppp->mru updates in
PPPIOCSMRU with ppp_recv_lock(ppp).
2. PPPIOCGFLAGS reads ppp->flags, ppp->xstate, and ppp->rstate
unlocked. Wrap the read in ppp_lock(ppp) to get a consistent
snapshot.
3. ppp->debug is updated via PPPIOCSDEBUG and read concurrently on
fast paths. Annotate reads with READ_ONCE() and writes with
WRITE_ONCE().
4. ppp->last_xmit and ppp->last_recv are updated on TX/RX data paths
and read via PPPIOCGIDLE32 / PPPIOCGIDLE64 ioctls. Annotate with
WRITE_ONCE() / READ_ONCE() and use max() to handle jiffies
subtraction.
5. ppp->npmode[] is updated via PPPIOCSNPMODE and read on TX/RX
paths. Annotate with WRITE_ONCE() / READ_ONCE().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260722101605.2868548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When Linux forwards a packet and needs to generate an ICMP error,
icmp_route_lookup() performs a reverse-path relookup. For non-local
destinations, it performs a decoy lookup to find the expected egress
interface (rt2->dst.dev) before validating the path with ip_route_input().
Currently, the decoy flow structure (fl4_2) only sets .daddr = fl4_dec.saddr,
leaving .saddr, .flowi4_dscp, .flowi4_proto, .flowi4_mark, .flowi4_oif,
.fl4_sport, .fl4_dport, and .flowi4_uid zeroed out.
When policy routing rules (such as ip rule add from $SRC lookup 100, or
dscp/fwmark/ipproto/port rules, or VRF bindings) are configured:
1. The decoy lookup fails to match the policy rule because saddr and other
key flow selectors are missing in fl4_2.
2. It resolves a route using the default table instead, returning an incorrect
egress netdev.
3. Passing the wrong netdev to ip_route_input() causes strict reverse-path
filtering (rp_filter=1) to fail, logging false-positive "martian source"
warnings and causing the relookup to fail.
Fix this by initializing fl4_2 from fl4_dec and:
- Swapping source/destination IP addresses.
- Swapping L4 ports for transport protocols with ports (TCP, UDP, SCTP, DCCP)
so port-based policy routing matches correctly. Non-port protocols (such as
ICMP or GRE) leave the flowi_uli union fields intact to prevent corruption.
- Setting .flowi4_oif = l3mdev_master_ifindex(route_lookup_dev) to ensure
VRF routing tables are respected.
- Setting .flowi4_flags |= FLOWI_FLAG_ANYSRC to allow output route lookups
for non-local source IP addresses.
- Using __ip_route_output_key() instead of ip_route_output_key() for fl4_2
so that raw FIB routing is used without triggering spurious XFRM policy
lookups on the decoy flow (the actual XFRM lookup is performed later using
fl4_dec).
Fixes: 415b3334a2 ("icmp: Fix regression in nexthop resolution during replies.")
Reported-by: Muhammad Ziad <muhzi100@gmail.com>
Closes: https://lore.kernel.org/netdev/CAOAwikA60AYKdFr_UDLyja3oU4hqyAE7uFZWqum5uRdaQsgRYg@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260722104236.2938082-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Cc: stable@vger.kernel.org
Signed-off-by: Shihuang Liu <shlomojune6@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260722113919.7723-1-shlomojune6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initial PWM and PSC register writes in pca9532_configure() do not
check the return values of i2c_smbus_write_byte_data(). If the I2C
device is physically absent from the bus, the write fails with -ENXIO.
However, the driver ignores this error and allows probe() to complete
successfully.
This results in the registration of phantom LED class devices and
gpiochips backed by non-existent hardware. Subsequent GPIO reads from
these phantom chips return bogus values (due to -ENXIO being truncated
to an unsigned char in pca9532_gpio_get_value()), silently corrupting
hardware state tracking in userspace.
Propagate the I2C write failures back to probe() so the driver core
can gracefully abort binding and release devres-managed resources.
Fixes: e14fa82439 ("leds: Add pca9532 led driver")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715080747.1638097-1-chou.cosmo@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Introduce the "dpm_watchdog_enabled" module parameter to allow the DPM
watchdog to be enabled or disabled at boot time and runtime.
Additionally, introduce the CONFIG_DPM_WATCHDOG_ENABLED Kconfig option
to set the default value of the module parameter at compile time.
The primary motivation for this configurability resolves around Android
GKI (Generic Kernel Image). We want to enable CONFIG_DPM_WATCHDOG in
the GKI so the feature is available. However, because the GKI is shared
across many different devices, we don't want to inadvertently affect
devices that are unaware of this feature. This provides a way to
compile it in, but keep it disabled by default for those devices via the
kernel command line or module parameters.
To maintain backward compatibility, CONFIG_DPM_WATCHDOG_ENABLED relies
on `default y`. Previously, the DPM watchdog was always active if
CONFIG_DPM_WATCHDOG was set. Defaulting this new option to 'y' ensures
that the behavior remains unchanged for existing users and defconfigs
when they upgrade.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-3-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the module parameters defined in drivers/base/power/main.c
use the default prefix "main" (derived from the filename). The prefix
is too generic and non-descriptive.
Redefine MODULE_PARAM_PREFIX to "pm." to group the module
parameters under the namespace instead. This makes the parameters more
descriptive.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-2-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change the function's return type from 'int' to 'bool' and return the result
of memcmp() directly to simplify the code. While at it, cast ->start to
const u8 * to better match the expected type.
Also inline the verify_sha256_digest() check and remove the redundant
local 'ret' variable in purgatory().
No change in functionality expected.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://patch.msgid.link/20260723133634.161598-3-thorsten.blum@linux.dev
vfs_lookup_open() is a limited version of lookup_open() which is
exported for nfsd to use - to replace dentry_create().
It is limited in that no filename is given (thus no auditing) and no
LOOKUP_ flags are passed. A few "intent" LOOKUP flags are deduced from
the open flags.
If a non-regular file is found and appropriate error is returned and no
file is opened.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-4-neilb@ownmail.net
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
By moving this retry into lookup_open() we no longer need to pass around
the delegated_inode pointer.
Various variable assignments need to be moved out of the declaration
block so that they can be repeated after the "goto retry".
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-3-neilb@ownmail.net
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The mnt_want_write() call and the parent inode locking in
open_last_lookups() are only needed for lookup_open(). So we can move
them and all the got_write handling into lookup_open().
Note that we need to also check create_error when determining whether to
unlock shared or not, as O_CREAT can be cleared, but create_error is
only set of O_CREAT was set.
The fsnotify calls come too as they must be in the locked region.
Also use the existing dir_inode uniformly for dir->d_inode.
This is a step towards exporting an better "open/create" interface to nfsd.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-2-neilb@ownmail.net
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Replace snprintf() with sysfs_emit_at() in trans_table_show().
sysfs_emit_at() is preferred for formatting sysfs output because it
provides safer bounds checking.
Convert multiple PAGE_SIZE length checks to check the number of bytes
actually copied by sysfs_emit_at(), thus avoiding manual buffer size
accounting.
Consistently return -EFBIG when the transition table output exceeds the
sysfs buffer, including the header row.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260719132251.31936-3-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The MCTP serial receive state machine reads a frame length byte in
mctp_serial_push_header() case 2 and validates it upper-bound-only:
if (c > MCTP_SERIAL_FRAME_MTU) {
dev->rxstate = STATE_ERR;
} else {
dev->rxlen = c;
dev->rxpos = 0;
dev->rxstate = STATE_DATA;
...
}
A length of zero passes this check, so rxlen is set to 0 and the state
machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the
incoming byte is stored and rxpos incremented before the terminator is
tested:
dev->rxbuf[dev->rxpos] = c;
dev->rxpos++;
dev->rxstate = STATE_DATA;
if (dev->rxpos == dev->rxlen) {
dev->rxpos = 0;
dev->rxstate = STATE_TRAILER;
}
With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is
already 1 on the first data byte), so subsequent bytes are written past
the end of the fixed 74-byte rxbuf, which is the last member of the
netdev private area. Every following data byte is an attacker-controlled
1-byte out-of-bounds heap write, and the overflow continues until a
frame (0x7e) or escape byte resets the parser -- effectively unbounded.
Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line
discipline and bring the resulting mctpserialN netdev up, after which
the bytes arrive via the tty receive path.
Route a zero-length frame straight to STATE_TRAILER instead of
STATE_DATA. The trailer/framing bytes are still consumed, and the frame
resolves to a zero-length skb that the MCTP core rejects; the parser
never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can
no longer occur.
KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this
change):
UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370
index 74 is out of range for type 'u8 [74]'
BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf
Write of size 1 at addr ... by task kworker/u16:0
mctp_serial_tty_receive_buf
tty_ldisc_receive_buf
flush_to_ldisc
Allocated by task 152:
alloc_netdev_mqs
mctp_serial_open
v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so
the trailer/framing bytes are still consumed (Jeremy Kerr).
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: a0c2ccd9b5 ("mctp: Add MCTP-over-serial transport binding")
Cc: stable@vger.kernel.org
Suggested-by: Jeremy Kerr <jk@codeconstruct.com.au>
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715082021.46315-1-doruk@0sec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When MCAM entries are allocated for a VF netdev via the devlink
mcam_count parameter, only OTX2_FLAG_NTUPLE_SUPPORT was set. That
enabled ethtool ntuple filters but not tc flower offload. Also set
OTX2_FLAG_TC_FLOWER_SUPPORT when entries are successfully allocated.
Fixes: 2da4894327 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715052007.2099851-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Delay allocating and linking the next swap_map_page until another image
page actually needs to be recorded.
The previous code linked and wrote a new swap map page as soon as the
current one became full. When the image size was an exact multiple of
MAP_PAGE_ENTRIES, that left an empty final map page that existed only to
terminate the on-disk chain.
Instead, keep a full map page in memory and only allocate the next map page
when the next image page arrives. This preserves the resume chain while
avoiding an unnecessary swap slot allocation and write for the empty
swap map page.
Signed-off-by: Haesung Kim <mattkim513@gmail.com>
Link: https://patch.msgid.link/20260714072627.3165744-1-mattkim513@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When memory_bm_create() succeeds for copy_bm but fails for zero_bm,
the function returns without freeing the resources allocated for
copy_bm. This results in a memory leak that includes radix tree nodes,
zone structures, and page lists.
Fix this by calling memory_bm_free() to release copy_bm's resources
before returning the error code when zero_bm allocation fails.
Fixes: 005e8dddd4 ("PM: hibernate: don't store zero pages in the image file")
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Link: https://patch.msgid.link/20260711145246.8625-1-malayarout91@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update the NIX_GET_HW_INFO mailbox message to return the VWQE timer
delay, which is used for vector packet wait time calculation.
Repurpose the existing rsvs16 reserved field in struct nix_hw_info
to vwqe_delay and populate it by reading the NIX_AF_VWQE_TIMER
register (applicable for non-OTX2 silicon).
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715073112.622662-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case iproute2 is older than version 5.14.0, released ~Sept 1, 2021,
the End.DT46 support is not available and the host_vpn_tests test contained
in the srv6_end_dt46_l3vpn_test.sh file is failing in some kernel backports.
This is the result of those tests:
################################################################################
TEST SECTION: SRv6 VPN connectivity test among hosts in the same tenant
################################################################################
TEST: IPv6 Hosts connectivity: hs-t100-1 -> hs-t100-2 (tenant 100) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t100-1 -> hs-t100-2 (tenant 100) [ FAIL ]
TEST: IPv6 Hosts connectivity: hs-t100-2 -> hs-t100-1 (tenant 100) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t100-2 -> hs-t100-1 (tenant 100) [ FAIL ]
TEST: IPv6 Hosts connectivity: hs-t200-3 -> hs-t200-4 (tenant 200) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t200-3 -> hs-t200-4 (tenant 200) [ FAIL ]
TEST: IPv6 Hosts connectivity: hs-t200-4 -> hs-t200-3 (tenant 200) [ FAIL ]
TEST: IPv4 Hosts connectivity: hs-t200-4 -> hs-t200-3 (tenant 200) [ FAIL ]
To amend this, check the current running iproute2 supports the required
feature and, if not, just skip the entire test to avoid a failure.
Signed-off-by: Alessio Faina <alessio.faina@canonical.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260715122859.36177-1-alessio.faina@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are still a handful of ancient mips/armv5/sh boards that use the
gpio_led:gpio member to pass an old-style gpio number, but all modern
users have been converted to gpio descriptors.
While the CONFIG_GPIOLIB_LEGACY option that guards devm_gpio_request_one()
and related helpers is currently turned on in all kernel builds,
the plan is to only enable it on the few platforms that actually
pass gpio numbers in any platform_data.
Split out the legacy portion of the platform_data handling into a custom
helper function that is guarded with in #ifdef block, to allow the
the leds-gpio driver to compile cleanly when CONFIG_GPIOLIB_LEGACY
gets turned off. Once the last user is converted, this function can
be removed.
Link: https://lore.kernel.org/all/e9252384-a55c-4a91-9c61-06e05a0b2ce4@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://patch.msgid.link/20260710211854.1371746-4-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add an optional mlx5 driver-namespace UMEM attribute on SRQ create so
userspace can supply the doorbell record umem explicitly, symmetric to
the CQ and QP sides. Resolve it inside mlx5_ib_db_map_user() and use it
as a private DBR page when present; otherwise take the existing UHW
share-or-pin path that preserves per-page DBR sharing across CQ/QP/SRQ
in the same process.
Add mlx5's first UVERBS_OBJECT_SRQ UAPI definition chain to attach the
new attr.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-4-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use the per-attribute UMEM helper to pin the SRQ buffer umem on demand.
ib_umem_get_attr_or_va() resolves the new CREATE_SRQ_BUF_UMEM attribute
when present and otherwise falls back to the existing UHW ucmd->buf_addr
VA, preserving the legacy behavior.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-3-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Apply the per-attribute UMEM model to the SRQ create method. Add an
optional UMEM attribute that backs the SRQ WQE buffer, so userspace can
supply it as either a VA or a dma-buf through a single descriptor,
consistent with the CQ and QP create methods.
mlx5 is the only driver that pins an SRQ WQE buffer via umem; it maps a
single ucmd->buf_addr region through this attribute. No other driver
implements a user SRQ buffer, so none of them use the attribute.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260701124015.64350-2-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pass the pinctrl error pointer directly to %pe to print the
symbolic error name.
Detected by Coccinelle. Tested by compiling.
Signed-off-by: Ninad Naik <ninadnaik07@gmail.com>
Link: https://patch.msgid.link/20260713200732.2470666-1-ninadnaik07@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Implement returning to userspace applications PDNs of created PDs.
The PDN is used by applications that build work requests outside of the
rdma-core code base. The PDN is used to build work requests that require
mentioning the PD. The HW still ensures PD isolation using PDN attached
to MRs and WRs, therefore the PDN mentioned in the work request must match
the PDN of the used work queue. The work requests can fit only 16 bit PDNs.
Allow users to request short PDNs which are 16 bits.
The capability to request short PDN and get PDN is encoded in the response
of alloc user context IOCTL.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/20260717200839.495327-1-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Expose pci_sriov_get_totalvfs() to Rust PCI drivers so they can query
how many SR-IOV VFs a device supports.
Use a conditional C helper because the !CONFIG_PCI_IOV version of
pci_sriov_get_totalvfs() is a static inline function and is therefore
not emitted into the Rust bindings. Return Option<NonZero<u16>> so Rust
callers must handle the zero value that represents unavailable SR-IOV.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: linux-pci@vger.kernel.org
Link: https://lore.kernel.org/all/DJHPRE4TGGT8.BUTMYOF5YE05@nvidia.com/
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-3-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
pci_sriov_get_totalvfs() reports a VF count, not an errno-style
status. It returns 0 when SR-IOV is unavailable or the device is not a
PF, and otherwise returns the PF's driver_max_VFs value.
driver_max_VFs is stored as a u16 in struct pci_sriov. It is derived
from the SR-IOV TotalVFs field or from a driver-provided limit, so the
implementation cannot return a negative value.
Change the declaration, CONFIG_PCI_IOV stub, and implementation to
return unsigned int.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: linux-pci@vger.kernel.org
Link: https://lore.kernel.org/all/DJHPRE4TGGT8.BUTMYOF5YE05@nvidia.com/
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-2-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Document the default-intensity property to set a default color on
multicolor LEDs.
Update pwm-multicolor to support it and update the example to turn the
LED red on boot.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260713-multicolor-default-v3-1-fb43f3f789cf@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
The Acer Aspire AG14-22P has its internal microphone connected to the
ACP as a digital microphone, but the BIOS does not advertise it via the
AcpDmicConnected ACPI property, so the internal microphone does not work
out of the box. Add a DMI quirk to enable it.
Tested on an Aspire AG14-22P (board Dove2_MDU, BIOS V1.03): the acp6x
DMIC card is created and the internal microphone captures audio.
Assisted-by: Claude-Code:claude-fable-5
Signed-off-by: Jorn Baayen <jhbaayen@fastmail.com>
Link: https://patch.msgid.link/20260721151924.30316-1-jhbaayen@fastmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The slot array already tracks allocation and task_monitor_count
duplicates that state. On an invalid second release, the old code
warns but still decrements the counter, corrupting later allocations.
Use the slot array as the sole source of truth. Return after warning
about an unused slot, and return -EBUSY when no slot is free.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://lore.kernel.org/r/20260715015825.1413822-1-liqiang01@kylinos.cn
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Per-object monitors can allocate memory dynamically and such memory is
required for the lifetime of the object, then it should be freed with
the appropriate call.
Force the generation scripts to add a cleanup function the user will
need to wire to the appropriate event (e.g. sched_process_exit for
tasks). This can be safely removed if the object will never cease to
exist before disabling the monitor (e.g. if following only static
variables).
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-14-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
The da_monitor_reset_all() function for per-task monitors takes
tasklist_lock while iterating over tasks, then keeps it also while
iterating over idle tasks (one per CPU). The latter is not necessary
since the lock needs to guard only for_each_process_thread().
Use a scoped_guard for more compact syntax and adjust the scope only
where the lock is necessary.
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-13-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
The rvgen source comments still refer to da_monitor_synthesis.rst, which
no longer exists. The documentation is now available in
monitor_synthesis.rst. Update both references to point to the current
file.
Signed-off-by: Yu Chuanyu <lucayu.alight@gmail.com>
Acked-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260618-rvgen-doc-path-v1-1-9bcf0148417a@gmail.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Commit f0914b8436 ("mpls: Hold dev refcnt for mpls_nh.") added
change_nexthops() loop to call netdev_put() for the nexthop devices
before freeing mpls_route.
Then, mpls_nh_build_multi() was also changed to avoid iterating
uninitialised nexthops in mpls_rt_free_rcu().
However, setting rt->rt_nhn to 0 at the entry of mpls_nh_build_multi()
makes the following change_nexthops() no-op.
Let's set rt->rt_nhn just before returning from mpls_nh_build_multi().
Fixes: f0914b8436 ("mpls: Hold dev refcnt for mpls_nh.")
Reported-by: Anthony Doeraene <anthony.doeraene@uclouvain.be>
Closes: https://lore.kernel.org/netdev/036a0c95-f5d4-46ab-88e7-1eab567d7a84@uclouvain.be/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260716170609.804629-1-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and
erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed,
leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN
identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and
permanently disables the command queue, so no retry can succeed; the RDMA
core keeps the object after a failed destructor and forced uverbs cleanup
then nulls the pointers, making the resources unreachable.
Warn on failure but release every software-owned resource and return
success, since during terminal destruction the hardware command result is
only diagnostic.
Fixes: 1550557717 ("RDMA/erdma: Add verbs implementation")
Link: https://patch.msgid.link/20260722-b4-qp-and-cq-memory-are-leaked-if-the-d-v1-1-97e223dc1c96@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
* Avoid running unit tests without amd-pstate
* Fixes for EPP on shared memory systems
* Fixes for dynamic EPP callbacks
* Avoid loading on guests
* Allow lowest nonlinear == minimum freq
-----BEGIN PGP SIGNATURE-----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=rxGv
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v7.3-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 7.3 (07/22/26) from Mario Limonciello:
"* Avoid running unit tests without amd-pstate
* Fixes for EPP on shared memory systems
* Fixes for dynamic EPP callbacks
* Avoid loading on guests
* Allow lowest nonlinear == minimum freq"
* tag 'amd-pstate-v7.3-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (923 commits)
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
cpufreq/amd-pstate: Cache the firmware programmed EPP value
cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems
cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization
cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
Linux 7.2-rc4
Revert "drm/amd/display: Restore 5s vbl offdelay for NV3x+ DGPUs"
drm/amd/display: check GRPH_FLIP status before sending event
drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
drm/amd: Create a device link between APU display and XHCI devices
drm/amd/display: wire DCN42B mcache programming callback
drm/amd/display: set new_stream to NULL after release
drm/amd/display: Force PWM backlight on Lenovo Legion 5 15ARH05
drm/amdkfd: free MQD managers on DQM init failures
drm/amdgpu/ttm: Consider concurrent VM flushes for buffer entities
drm/amd/pm/smu7: Fix AC/DC switch notification
drm/amdgpu: Disable PCIe dynamic speed switching on Ryzen Pinnacle Ridge
drm/amdgpu: always emit the job vm fence
...
* Fix a case blocking amd-pstate from binding
when lowest nonlinear freq == minimum freq
* Stop trying to bind in guests
-----BEGIN PGP SIGNATURE-----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=XjRG
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v7.2-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate fixes for 7.2 (7/22/26) from Mario Limonciello:
"* Fix a case blocking amd-pstate from binding
when lowest nonlinear freq == minimum freq
* Stop trying to bind in guests"
* tag 'amd-pstate-v7.2-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
Add driver for the LTC3220 18-channel LED driver
with I2C interface, individual brightness control, and hardware-assisted
blink/gradation features.
Signed-off-by: Edelweise Escala <edelweise.escala@analog.com>
Link: https://patch.msgid.link/20260709-ltc3220-driver-v13-2-9b53237642eb@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
LTC3220 is a multi-display LED driver with I2C interface.
The LTC3220 provides individual brightness control (64-step),
blinking, and gradation features for up to 18 LED outputs.
Signed-off-by: Edelweise Escala <edelweise.escala@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260709-ltc3220-driver-v13-1-9b53237642eb@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
Before commit 00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to
dev->lltx"), NETIF_F_LLTX was set unconditionally in both
__gre_tunnel_init() and ip6gre_tnl_init_features() alongside
GRE_FEATURES:
dev->features |= GRE_FEATURES | NETIF_F_LLTX;
When that commit converted NETIF_F_LLTX to the dev->lltx flag, it
placed 'dev->lltx = true' after the SEQ/CSUM early returns instead
of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or
CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition
around their ndo_start_xmit. Since GRE xmit re-enters the stack via
ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the
underlay device.
CPU0 CPU1
---- ----
lock(&qdisc_xmit_lock_key#6);
lock(&qdisc_xmit_lock_key#3);
lock(&qdisc_xmit_lock_key#6);
lock(&qdisc_xmit_lock_key#3);
Fix by moving dev->lltx = true before the early returns in both
functions, restoring the original unconditional behavior.
Fixes: 00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260713150945.1779628-1-yun.zhou@windriver.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When tipc_sk_create() fails to insert the new socket (tipc_sk_insert()
returns non-zero), its error path frees the sk with sk_free() but leaves
sock->sk pointing at the freed object:
if (tipc_sk_insert(tsk)) {
sk_free(sk);
pr_warn("Socket create failed; port number exhausted\n");
return -EINVAL;
}
This is harmless for plain socket(): the syscall layer clears sock->ops
before releasing, so tipc_release() is never called. It is not harmless
on the accept() path. tipc_accept() creates the pre-allocated child
socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves
new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then
fput()s the new file, so __sock_release() -> tipc_release() runs
lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the
sk_lock spinlock.
tipc_release() already guards this exact "failed accept() releases a
pre-allocated child" case with "if (sk == NULL) return 0;", but the
guard is bypassed because tipc_sk_create() left sock->sk non-NULL
(dangling) rather than NULL.
Clear sock->sk on the failed-insert path so the existing tipc_release()
NULL check fires and the use-after-free is avoided.
The tipc_sk_insert() failure is reached when the per-netns socket
rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M
elements) -- i.e. once a netns holds ~2M TIPC sockets every insert
returns -E2BIG.
BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839)
Write of size 8 at addr ffff8880047cdc38 by task init/1
lock_sock_nested (net/core/sock.c:3839)
tipc_release (net/tipc/socket.c:638)
__sock_release (net/socket.c:710)
sock_close (net/socket.c:1501)
__fput (fs/file_table.c:512)
Allocated by task 1:
sk_alloc (net/core/sock.c:2308)
tipc_sk_create (net/tipc/socket.c:487)
tipc_accept (net/tipc/socket.c:2744)
do_accept (net/socket.c:2034)
Freed by task 1:
__sk_destruct (net/core/sock.c:2391)
tipc_sk_create (net/tipc/socket.c:504)
tipc_accept (net/tipc/socket.c:2744)
do_accept (net/socket.c:2034)
Fixes: 00aff3590f ("net: tipc: fix possible refcount leak in tipc_sk_create()")
Cc: stable@vger.kernel.org
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Daehyeon Ko <4ncienth@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260714131939.1255974-1-4ncienth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After adding ACPI _LPI support to intel_idle, update its admin-guide
documentation to cover the changed behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/12962673.O9o76ZdvQC@rafael.j.wysocki
stmmac_mac_link_down() clears the MAC's transmit and receive enable bits.
stmmac_mac_link_up() is expected to set them again through
stmmac_mac_set(..., true), but it first switches on the negotiated speed
and returns early for a speed the switch does not list. The MAC is then
left gated off.
The speed selection is split into three switches, keyed on the interface.
The generic branch -- taken for everything that is neither USXGMII nor
XLGMII, so including PHY_INTERFACE_MODE_10GBASER -- lists only SPEED_2500,
SPEED_1000, SPEED_100 and SPEED_10.
MGBE on Tegra234 runs 10GBASE-R into an Aquantia AQR113C. That PHY does
rate matching, so phylink_link_up() replaces the media speed with the
MAC-side interface speed before calling into the MAC:
case RATE_MATCH_PAUSE:
speed = phylink_interface_max_speed(link_state.interface);
duplex = DUPLEX_FULL;
The driver is therefore called as
stmmac_mac_link_up(interface=10GBASER, speed=10000, duplex=1)
which falls through to "default: return;". The interface stops passing
traffic after the first link flap.
The failure is easy to misread. The link still comes up, because the PHY
is polled over MDIO and needs no MAC, so the interface reports carrier 1
at the media speed. The DMA is untouched, so its start bits stay set and
descriptors are still consumed. Only the MAC itself is gated off: the
receiver counts nothing (mmc_rx_framecount_gb stops advancing, RE is 0)
and nothing reaches the wire (TE is 0). The interface survives boot only
because stmmac_hw_setup(), called from ndo_open, enables the MAC
unconditionally -- so the problem appears only once the cable has been
unplugged and plugged back in, and "ip link set dev <ethX> down && ip
link set dev <ethX> up" appears to fix it.
The interface is not what the speed bits depend on: with the single
exception of 2.5G, which is selected through the XGMII block on USXGMII
and through the regular speed bits otherwise, each speed maps to one
field of struct mac_link. The per-interface switches are speed
validation, and phylink already validates the speed against
priv->hw->link.caps. So collapse the three switches into one keyed on the
speed alone, keeping the interface test only for the 2.5G case. This
covers 10G on 10GBASE-R, and equally 5G, and 1G/100/10 on USXGMII, all of
which hit "default: return;" today.
A core that does not support a speed leaves the corresponding mac_link
field at 0, and phylink will not offer it that speed in the first place.
For dwxgmac2 at 10G, link.xgmii.speed10000 is XGMAC_CONFIG_SS_10000,
which is 0 and is the correct speed selection for a 10GBASE-R MAC: ctrl
then equals old_ctrl, the register write is skipped, and execution
reaches stmmac_mac_set(..., true).
Log an error in the default case, since a speed with no entry here leaves
the MAC disabled and the symptom does not point at the cause.
Fixes: d8ca113724 ("net: stmmac: tegra: Add MGBE support")
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: vadik likholetov <vadikas@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713074911.30090-1-vadikas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 319c151747 ("epoll: take epitem list out of struct file")
intentionally removed temporary file references from the reverse path
check list. At the time, both epitems and their files were freed after
an RCU grace period, so unlist_file() could obtain file->f_lock through
an epitem while clear_tfile_check_list() held rcu_read_lock().
Commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU") made
struct file SLAB_TYPESAFE_BY_RCU and removed its RCU-delayed freeing.
RCU still protects the epitem, but no longer keeps the referenced file
from being freed and reused. A concurrent close can therefore make
unlist_file() lock or unlock f_lock in a recycled file object.
This violates the documented SLAB_TYPESAFE_BY_RCU rule requiring a
reference before acquiring an object's lock. The race was reproduced,
causing a wild unlock of f_lock in a recycled file and breaking its
mutual exclusion.
Add ->file to epitems_head to remember the pinned file independently of
->epitems. A concurrent EPOLL_CTL_DEL can empty ->epitems before the head
is unlisted, leaving no epi->ffd.file from which to drop the reference.
In list_file(), acquire the reference before adding the head to the
check list. The caller either owns a reference or holds the ep->mtx for
the epitem leading to the file. In the latter case, file_ref_get() can
fail after the last reference is dropped, but eventpoll_release_file()
must acquire the same mutex before the file can be freed. The dying leaf
can be skipped because removing links cannot increase the reverse path
count.
In unlist_file(), epnested_mutex excludes another list_file() or
unlist_file(), while head->next prevents a concurrent EPOLL_CTL_DEL from
freeing the head. Save head->file locally, clear it with head->next
under f_lock, and drop the reference after the RCU-protected operation.
Christian Brauner <brauner@kernel.org> quotes:
> SLAB_TYPESAFE_BY_RCU allows a slab slot to be reused while an RCU reader
> still holds its old address. Once that address contains a new live
> struct file, KASAN sees valid, unpoisoned memory and cannot distinguish
> the stale object identity. CONFIG_DEBUG_SPINLOCK exposes the failure
> instead.
>
> The failing interleaving is:
>
> CPU0: nested EPOLL_CTL_ADD CPU1: close/open churn
> ------------------------------------ ---------------------------------
> p = hlist_first_rcu(&head->epitems)
> epi = container_of(p, ...)
> close(victim)
> __fput()
> eventpoll_release_file()
> file_free(victim)
> // the slot is free; f_lock remains
> spin_lock(&epi->ffd.file->f_lock)
> open() reuses the slot as new_file
> spin_lock_init(&new_file->f_lock)
> spin_unlock(&epi->ffd.file->f_lock) // wild unlock of new_file's lock
>
> CONFIG_DEBUG_SPINLOCK reports:
>
> BUG: spinlock already unlocked on CPU#0, poc_unlist/150
> lock: 0xffff8880067fb200, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1
> CPU: 0 UID: 1000 PID: 150 Comm: poc_unlist Not tainted 7.2.0-rc3-dirty #22 PREEMPTLAZY
> Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
> Call Trace:
> <TASK>
> dump_stack_lvl+0x64/0x80
> do_raw_spin_unlock+0x75/0xb0
> _raw_spin_unlock+0xe/0x30
> clear_tfile_check_list+0x88/0xe0
> do_epoll_ctl_file+0x519/0xcf0
> ? __pfx_ep_ptable_queue_proc+0x10/0x10
> do_epoll_ctl+0x8f/0x100
> __x64_sys_epoll_ctl+0x6f/0xa0
> do_syscall_64+0xdc/0x520
> ? srso_alias_return_thunk+0x5/0xfbef5
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
> RIP: 0033:0x42034e
> Code: 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 e9 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007a657ff3c198 EFLAGS: 00000202 ORIG_RAX: 00000000000000e9
> RAX: ffffffffffffffda RBX: 00007a657ff3ccdc RCX: 000000000042034e
> RDX: 0000000000000003 RSI: 0000000000000001 RDI: 0000000000000004
> RBP: 00007a657ff3c2f0 R08: 0000000000000000 R09: 00007a657ff3c6c0
> R10: 00007a657ff3c1a4 R11: 0000000000000202 R12: 00007a657ff3c6c0
> R13: ffffffffffffffb8 R14: 000000000000000d R15: 00007fffb7de0210
> </TASK>
> ------------[ cut here ]------------
>
> unlist_file() does not appear as a separate frame because it was inlined
> into clear_tfile_check_list(). This report was obtained with mdelay()
> instrumentation immediately before spin_lock() and spin_unlock() in
> unlist_file() to widen the two race windows.
>
> More importantly, this is a wild unlock. The stale unlock can target
> f_lock of a different live file and invalidate mutual exclusion for
> state protected by that lock. Turning this into a reliable exploit
> would require precise scheduling and same-slot reuse and is likely
> difficult, but the primitive is potentially exploitable.
Reported-by: Qi Tang <tpluszz77@gmail.com>
Reported-by: Junxi Qian <qjx1298677004@gmail.com>
Fixes: 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU")
Cc: stable@vger.kernel.org
Signed-off-by: Guidong Han <2045gemini@gmail.com>
Link: https://patch.msgid.link/20260718104406.27897-1-2045gemini@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Nazim Amirul says:
====================
net: stmmac: L3/L4 filter bug fixes
This series fixes three bugs in the stmmac L3/L4 TC flower filter
implementation for the XGMAC2 core. All three patches target net.
The L3/L4 filter match count statistics patch (originally patch 4/4)
has been split out and will be sent separately against net-next per
Andrew Lunn's review of v1.
Patch 1 fixes a register corruption bug in the L4 filter port configuration.
The XGMAC_L4_ADDR register holds both source and destination port match
values in a single register. The original code overwrites the entire register
when setting either field, silently erasing the other. This is fixed by
using a read-modify-write sequence.
Patch 2 fixes the basic flow match parser to properly reject unsupported
offload requests with -EOPNOTSUPP instead of silently accepting them.
Unsupported cases include partial protocol masks, non-IPv4 network proto,
and non-TCP/UDP transport proto. Extack messages are now included so users
know exactly which part of the match is unsupported. The -EOPNOTSUPP is
also now returned directly instead of using break, which was silently
discarding the error on FLOW_CLS_REPLACE operations.
Patch 3 fixes a stale action bug on filter deletion. When a filter entry
with a drop action is deleted, the action field was not reset, causing
it to persist and potentially affect subsequent filter configurations.
All three patches fix the original L3/L4 filter implementation introduced in
425eabddaf ("net: stmmac: Implement L3/L4 Filters using TC Flower").
====================
Link: https://patch.msgid.link/20260714023716.29865-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When deleting an L3/L4 flower filter entry, the action field is not
reset. If a filter was previously configured with a drop action, that
action may persist and affect subsequent filter configurations
unintentionally.
Clear the action field when the filter entry is deleted.
Fixes: 425eabddaf ("net: stmmac: Implement L3/L4 Filters using TC Flower")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260714023716.29865-5-muhammad.nazim.amirul.nazle.asmade@altera.com
Reviewed-by: Jakub Raczynski <j.raczynski@samsung.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The basic flow parser in tc_add_basic_flow() does not validate match
keys before proceeding. Unsupported offload configurations such as
partial protocol masks, non-IPv4 network proto, or non-TCP/UDP transport
proto are silently accepted instead of returning -EOPNOTSUPP.
Add validation to return -EOPNOTSUPP early for:
- No network or transport proto present in the key
- Partial protocol mask (only full mask supported)
- Network proto is not IPv4
- Transport proto is not TCP or UDP
Each rejection includes an extack message so the user knows which part
of the match is unsupported.
Also propagate -EOPNOTSUPP from tc_add_basic_flow() in tc_add_flow()
by returning it directly rather than using break. The break was silently
discarding the error for FLOW_CLS_REPLACE operations where entry->in_use
is already true, causing tc_add_flow() to return 0 (success) for
unsupported replace requests.
Fixes: 425eabddaf ("net: stmmac: Implement L3/L4 Filters using TC Flower")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260714023716.29865-4-muhammad.nazim.amirul.nazle.asmade@altera.com
Reviewed-by: Jakub Raczynski <j.raczynski@samsung.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The XGMAC_L4_ADDR register holds both source and destination port
match values. The current implementation overwrites the entire register
when configuring either port, so setting one silently erases the other.
Fix this by reading the register first, then masking and updating only
the relevant field before writing back.
Fixes: 425eabddaf ("net: stmmac: Implement L3/L4 Filters using TC Flower")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260714023716.29865-3-muhammad.nazim.amirul.nazle.asmade@altera.com
Reviewed-by: Jakub Raczynski <j.raczynski@samsung.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
flush_tlb_mm_range() and arch_tlbbatch_flush() pin the current CPU while
they decide whether the flush can be handled locally or must be sent to
remote CPUs. The CPU pinning is needed for the current CPU number and for
the local TLB flush path, which reads per-CPU TLB state.
The caller does not need to remain pinned while waiting for a remote TLB
flush to complete. After the remote-flush path has been selected,
flush_tlb_info is caller-private stack storage, so the caller no longer
has to stay on the same CPU to protect a shared per-CPU flush_tlb_info
object.
flush_tlb_multi() may also route through x86 PV backends. Those backends
must protect their own CPU-local scratch state instead of relying on the
caller to stay pinned. Hyper-V already does this by disabling interrupts
while using hyperv_pcpu_input_arg, and Xen's multicall path brackets its
per-CPU multicall buffer with xen_mc_batch() and xen_mc_issue().
kvm_flush_tlb_multi() also disables preemption while using __pv_cpu_mask.
Remote TLB flushes may synchronously wait for many CPUs, and the wait can
take tens of milliseconds when remote CPUs have interrupts disabled or
when many CPUs are involved. Keeping preemption disabled for that whole
wait unnecessarily increases scheduling latency on the initiating CPU.
Drop the CPU pinning before calling flush_tlb_multi() in the remote paths
of flush_tlb_mm_range() and arch_tlbbatch_flush(). Keep the local paths
inside the pinned section because they still access this CPU's TLB state.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260709122933.4021501-15-zhouchuyi@bytedance.com
