Change node name eim-cs1 to eim-cs1-bus to fix below CHECK_DTS warnings:
arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: eim-cs1@f4000000 (fsl,eim-bus): $nodename:0: 'eim-cs1@f4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the fsl,eim-bus compatible strings for i.MX51 variants.
These compatibles are only intended for existing legacy chips (more than 15
years old) and will not be used for new device trees.
Fix below CHECK_DTBS warnings
arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: /eim-cs1@f4000000: failed to match any schema with compatible: ['fsl,eim-bus', 'simple-bus']
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Purgeable state updates only change VMA/BO metadata. They do not zap
PTEs when switching between DONTNEED and WILLNEED. PTEs are zapped
later if the BO is actually purged.
xe_vm_invalidate_madvise_range() waits on the VM dma-resv before checking
vma->skip_invalidation. Since purgeable madvise marks all affected VMAs to
skip invalidation, this wait is unnecessary and can stall on unrelated
in-flight work.
Skip the invalidate path entirely for purgeable state updates.
v2:
- Replace inline 'args->type != DRM_XE_VMA_ATTR_PURGEABLE_STATE'
check with a small helper madvise_range_needs_invalidation().
(Himal)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260526135447.2973029-1-arvind.yadav@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Fixes: ada7486c56 ("drm/xe: Implement madvise ioctl for xe")
Cc: <stable@vger.kernel.org> # v6.18+
(cherry picked from commit 134377098b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If a watcher deliberately disables interrupts (either by user choice, or
because we're dealing with a scoped reordered access) to avoid detecting
any data races in interrupts, NMIs are still able to fire.
When we set up a watchpoint on a scoped reordered access, we disabled
interrupts because the same CPU cannot observe reordering of its own
accesses. To ensure we observe no false positives from NMIs, disable
access checking for interrupt contexts as well.
Fixes: 69562e4983 ("kcsan: Add core support for a subset of weak memory modeling")
Signed-off-by: Marco Elver <elver@google.com>
In max98090_probe(), the -EPROBE_DEFER check after devm_clk_get() is
broken due to a missing IS_ERR() guard.
The code intends to return -EPROBE_DEFER only when the clock lookup
fails with that specific error. However, without IS_ERR() the check:
if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER)
is called unconditionally, including when devm_clk_get() succeeds and
returns a valid pointer. Calling PTR_ERR() on a valid pointer
reinterprets its address as a signed long; the result is arbitrary
and is almost never equal to -EPROBE_DEFER, so the check silently
does nothing in the success case. When devm_clk_get() fails with
any error other than -EPROBE_DEFER the check is also skipped, leaving
max98090->mclk holding an error pointer with no indication to the caller.
This means a deferred probe will never actually be triggered for this
device, and any non-EPROBE_DEFER clock error is silently swallowed with
the error pointer left in the mclk field.
Fix this by adding the missing IS_ERR() guard around the PTR_ERR() call,
matching the pattern already used in the sibling max98088 and wm8960
drivers.
Fixes: b10ab7b838 ("ASoC: max98090: Add master clock handling")
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Link: https://patch.msgid.link/20260720104254.14948-1-udaykhare77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cifs client and ksmbd server were missing the git branch info in the
MAINTAINERS file. They just were showing the git tree.
Signed-off-by: Steve French <stfrench@microsoft.com>
I noticed that we were immediately exiting this function if the
allocation fails, leaving the client and server object refcounts bumped.
Fix this by creating a common exit point to clean up dangling
references.
Fixes: 576acc2591 ("nfs4: take a reference on the nfs_client when running FREE_STATEID")
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Fixes: 7c1d5fae4a ("NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC call")
Tested-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Looking up a prog or map by name walks the whole id space. There is a
window between bpf_prog_get_next_id()/bpf_map_get_next_id() and getting
an fd for that id in which an unrelated object can be freed, and the
lookup then fails with ENOENT and aborts the whole command.
Skip such ids and keep walking, the same way do_show() already does.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/bpf/20260720071520.396363-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
In max98095_probe(), the -EPROBE_DEFER check after devm_clk_get() is
broken due to a missing IS_ERR() guard.
The code intends to return -EPROBE_DEFER only when the clock lookup
fails with that specific error. However, without IS_ERR() the check:
if (PTR_ERR(max98095->mclk) == -EPROBE_DEFER)
is called unconditionally, including when devm_clk_get() succeeds and
returns a valid pointer. Calling PTR_ERR() on a valid pointer
reinterprets its address as a signed long; the result is arbitrary
and is almost never equal to -EPROBE_DEFER, so the check silently
does nothing in the success case. When devm_clk_get() fails with
any error other than -EPROBE_DEFER the check is also skipped, leaving
max98095->mclk holding an error pointer with no indication to the caller.
This means a deferred probe will never actually be triggered for this
device, and any non-EPROBE_DEFER clock error is silently swallowed with
the error pointer left in the mclk field.
Fix this by adding the missing IS_ERR() guard around the PTR_ERR() call,
matching the pattern already used in the sibling max98088 and wm8960
drivers.
Fixes: e3048c3d2b ("ASoC: max98095: Add master clock handling")
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Link: https://patch.msgid.link/20260720103950.14474-1-udaykhare77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
do_boot_mode() copies the firmware payload, excluding its four-byte prefix,
into a fixed 15.5 KiB staging buffer. check_fw_sanity() already proves that
the image contains its seven-byte header and validates the declared image
length and checksum, but it does not impose this boot-mode destination
limit.
Reject images whose payload does not fit before allocating and filling the
staging buffer.
Fixes: d12b219a22 ("edgeport-ti: use request_firmware()")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
It matches the usual coding style to have the MODULE_DEVICE_TABLE macro
directly after the respective arrays.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/7f9d4a239c76b6bb384048ea5591a21ed87d9b0e.1782925276.git.u.kleine-koenig@baylibre.com
.subvendor and .subdevice were set to 0 implicitly, so only devices with
these two values set to 0 in hardware can probe automatically. Make this
requirement explicit.
While touching this array item, also make use of the pci macro designed
for that case.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/019450ffb519d02821364afca32b9f48bcd8d2b6.1782925276.git.u.kleine-koenig@baylibre.com
The pci driver must not kept registered if the module is unloaded after
vmbus_driver_register() fails. So check the return value of
vmbus_driver_register() and unregister the pci driver on failure.
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/4b7dbf00ce4ff664b7d5dd74b2f39d8d87c1ade9.1782925276.git.u.kleine-koenig@baylibre.com
The OCC poll response parser walks a counted list of sensor data blocks.
It used the static backing-array capacity as the parse boundary, but a
transport response makes only data_length bytes current and valid. A
truncated response can therefore make the parser consume a block header or
block extent outside the current response.
Use data_length as the parent boundary, prove the fixed poll header and
each current block header before reading them, and prove the complete block
before advancing. Keep parsed sensor metadata local until the complete
response has passed validation, then publish it. Propagate
malformed-response errors before publishing the OCC as active.
Fixes: aa195fe49b ("hwmon (occ): Parse OCC poll response")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260720115826.14813-1-pengpeng@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace ktime_get_real_seconds() with the monotonic
ktime_get_boottime_seconds() to ensure the keepalive mechanism is robust
against system clock modifications.
Right now, the driver uses ktime_get_real_seconds() to track peer
timeouts, relying on the system wall-clock.
An administrative time adjustment or an NTP sync that steps the clock
forward can cause `now' to instantly exceed `last_recv + timeout'.
When this occurs, the driver artificially expires healthy peers.
Depending on the OpenVPN user-space configuration, this triggers a
premature tunnel restart (if --keepalive or --ping-restart is used) or
a complete disconnection of the client (if --ping-exit is used).
Fixes: 3ecfd9349f ("ovpn: implement keepalive mechanism")
Signed-off-by: Marco Baffo <marco@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
mxuport_probe() reads version bytes at fixed offsets after
request_firmware() succeeds. Firmware loading success does not prove that
the blob reaches the highest version offset.
Reject short firmware images before reading the version bytes. This is
source-level parser hardening; no affected device or crash was observed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Fixes: ee467a1f20 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
The commit
08f9794d9b ("media: bcm2835-unicam: Fix RGB format / mbus code association")
introduced a check to see whether the format requested is the same as the
fourcc in the format list.
However, this breaks the case when userspace requested an unpacked fourcc,
e.g. RG10.
Unicam can work with or without unpacking pixels, e.g. pRAA or RG10, depending
on what userspace requests.
In the unpacking case, a dedicated register is being set.
If the userspace requests pRAA, this works, because the check validates the
pipeline:
v4l2-ctl -d /dev/video0 --set-fmt-video=width=3280,height=2464,pixelformat=pRAA \
--stream-mmap --stream-count=1 --stream-to=frame.raw
but, with
v4l2-ctl -d /dev/video0 --set-fmt-video=width=3280,height=2464,pixelformat=RG10 \
--stream-mmap --stream-count=1 --stream-to=frame.raw
unicam complains at validation level:
image: format mismatch: 0x300f <=> RG10 little-endian (0x30314752)
This should work, because MEDIA_BUS_FMT_SRGGB10_1X10 can be packed into either
RG10 or pRAA depending on the packing register.
To fix this, modified the condition check to also allow in the case when
requested format (fmt->pixelformat) is equal to fmtinfo->unpacked_fourcc.
Fixes: 08f9794d9b ("media: bcm2835-unicam: Fix RGB format / mbus code association")
Cc: stable@vger.kernel.org
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
[Sakari Ailus: Added Cc: stable.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Running kernel-doc on timer_migration.h reports:
Warning: kernel/time/timer_migration.h:105 bad line:
The empty line separating the @available paragraph from the @idle
member documentation in the struct tmigr_cpu kernel-doc block lacks
the " *" line prefix that kernel-doc requires on every line inside a
block. The header is not scanned by the build-time kernel-doc checks,
so the warning only shows up when kernel-doc is invoked on the file
directly.
Add the missing prefix. The empty line was introduced when the
@available documentation was expanded by commit 45a13ba52c
("timers/migration: Update stale @online doc to @available").
No functional change.
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Assisted-by: Claude:claude-sonnet-5
Link: https://patch.msgid.link/20260717035947.7-1-bbnpreetsingh@gmail.com
Use the struct keyword when describing a struct. Without that, the
type defaults to function.
Warning: ./include/linux/posix-timers_types.h:40 cannot understand
function prototype: 'struct posix_cputimer_base'
Warning: ./include/linux/posix-timers_types.h:55 cannot understand
function prototype: 'struct posix_cputimers'
Warning: ./include/linux/posix-timers_types.h:67 cannot understand
function prototype: 'struct posix_cputimers_work'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260720031236.3070575-2-rdunlap@infradead.org
Use the struct keyword when describing a struct.
Add missing kernel-doc for @it_pid_type.
Warning: ./include/linux/posix-timers.h:58 cannot understand
function prototype: 'struct cpu_timer'
Warning: ./include/linux/posix-timers.h:222 struct member
'it_pid_type' not described in 'k_itimer'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260720031236.3070575-1-rdunlap@infradead.org
The drm gpuvm code doesn't protect find operation against map operation,
and the driver needs to ensure a map operation shouldn't happen when a
find operation is in progress.
In some cases a find operation will be in progress when doing map/unmap
operations, and the find operation will do a NULL pointer dereference.
An example of the stack trace of such NULL dereference is shown below:
```
Unable to handle kernel access to user memory without uaccess routines at
virtual address 0000000000000010
[<ffffffff01e989d4>] drm_gpuva_find+0x28/0x6c [drm_gpuvm]
[<ffffffff01ed3a40>] pvr_vm_unmap+0x34/0x68 [powervr]
[<ffffffff01ec69da>] pvr_ioctl_vm_unmap+0x2e/0x50 [powervr]
[<ffffffff8080ce0a>] drm_ioctl_kernel+0x8e/0xdc
[<ffffffff8080d016>] drm_ioctl+0x1be/0x3e0
[<ffffffff802bec3e>] __riscv_sys_ioctl+0xba/0xc4
[<ffffffff80d858b2>] do_trap_ecall_u+0x23e/0x3f4
[<ffffffff80d92288>] handle_exception+0x168/0x174
```
As all occurences of drm_gpuva_find*() are already guarded by
vm_ctx->lock, make pvr_vm_map() to acquire this lock to prevent
disturbing any find operation. This fixes the NULL deference problem in
drm_gpuva_find*().
Cc: stable@vger.kernel.org
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Fixes: 4bc736f890 ("drm/imagination: vm: make use of GPUVM's drm_exec helper")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260714073641.1935075-1-zhengxingda@iscas.ac.cn
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
unlock_ovpn() iterates over the release_list using llist_for_each_entry()
and drops the peer reference inside the loop body via ovpn_peer_put().
If this drops the last reference, the peer is eventually freed. However,
llist_for_each_entry() reads peer->release_entry.next in the loop advance
expression, which runs after the body. By that time the peer may have
already been freed, resulting in a use after free when advancing to the
next list entry.
Fix this by using llist_for_each_entry_safe(), which caches the next
pointer before executing the loop body.
Fixes: 80747caef3 ("ovpn: introduce the ovpn_peer object")
Signed-off-by: Marco Baffo <marco@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
The ovpn_parse_remote() function has two memory management issues:
1. When both 'host' and 'vpnip' are non-NULL, the first getaddrinfo()
allocation is leaked because 'result' is overwritten by the second
getaddrinfo() call without freeing the first allocation.
2. When both 'host' and 'vpnip' are NULL, 'result' is an uninitialized
stack variable passed to freeaddrinfo(), which is undefined behavior.
Fix by initializing 'result' to NULL and calling freeaddrinfo() after
the first getaddrinfo() result is consumed.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: longlong yan <yanlonglong@kylinos.cn>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_peer_keepalive_send() passes its peer reference to
ovpn_xmit_special(), which ultimately drops it. The keepalive scheduler
currently queues the work first and takes the reference only after
schedule_work() reports that the work was queued.
Once schedule_work() queues the item, another CPU may run the worker
before the caller gets to ovpn_peer_hold(). In that case the worker can
consume a reference that was not acquired for it, corrupting the peer
lifetime accounting.
Take the peer reference before queueing the work and drop it again when
the work was already pending.
Fixes: 3ecfd9349f ("ovpn: implement keepalive mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
When either the TCP RX or TX error path calls ovpn_peer_hold() followed
by schedule_work(&peer->tcp.defer_del_work), and the work item is already
pending from the other path, schedule_work() returns false and the work
runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put()
exactly once, the extra reference taken by the losing path is never
dropped, leaking the peer object.
The race window:
CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error):
ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2
schedule_work() <- queued schedule_work() <- NO-OP
(work already pending)
ovpn_tcp_peer_del_work runs:
ovpn_peer_del()
ovpn_peer_put() <- refcnt+1
<- peer never freed
Fix by checking the return value of schedule_work() in both paths and
calling ovpn_peer_put() to drop the extra reference if the work was
already pending. ovpn_peer_hold() is kept unconditional in the TX path
as it cannot fail at that point.
Fixes: a6a5e87b3e ("ovpn: avoid sleep in atomic context in TCP RX error path")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_peer_release_p2p() is called when an OVPN UDP socket is being
destroyed. It checks the currently published P2P peer and releases it only
if that peer still uses the socket being destroyed.
A peer replacement can publish a new peer before the old UDP socket is
destroyed. When the old socket destruction path runs afterwards,
ovpn_peer_release_p2p() observes the new peer through ovpn->peer. Since the
new peer uses a different socket, the function takes the socket mismatch
branch.
That branch still calls ovpn_peer_put(peer). At this point, however, peer
is the currently published replacement peer, not the peer associated with
the socket being destroyed. Dropping its reference can free it while
ovpn->peer still points to it, leading to later use-after-free accesses
from the peer and socket cleanup paths.
KASAN reports this as a slab-use-after-free on the kmalloc-1k ovpn_peer
object. In the reproducer, the object is allocated from ovpn_peer_new() via
ovpn_nl_peer_new_doit(), and freed through ovpn_peer_release_rcu() from RCU
callback processing. Observed access sites include ovpn_peer_remove(),
ovpn_socket_release(), ovpn_nl_peer_del_notify(), and unlock_ovpn().
Fix this by returning from the socket mismatch branch without putting the
peer.
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Enable the robust udata contract by setting uverbs_robust_udata and
adding proper input validation and output handling to all verbs that
accept struct ib_udata.
For verbs with no driver request or response struct, add
ib_no_udata_io(). For create_ah, which already responds with
ionic_ah_resp, add the missing input validation via
ib_is_udata_in_empty().
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20260717092345.2533564-1-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enable the uverbs robust udata interface in mana_ib by setting
uverbs_robust_udata and converting the driver to the new udata
handling model.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
mlx5r_umr_alloc_xlt() allocates physically contiguous scratch buffers
that are DMA mapped only in the DMA_TO_DEVICE direction. kmalloc()
provides the required contiguity and alignment for these sizes while
preserving the existing GFP allocation policy.
The emergency translation buffer has the same requirements. Convert all
of these UMR buffers to kmalloc() and release them with kfree(), which no
longer requires the caller to supply the allocation order.
Link: https://patch.msgid.link/20260715-get_pages-to-kmalloc-v1-4-b0b7fce288be@nvidia.com
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
usnic_uiom_get_pages() uses a page-sized array of struct page pointers
as temporary storage for pin_user_pages(). Nothing requires the array to
come directly from the page allocator.
Use kmalloc() for the array and kfree() after the pinning loop.
Link: https://patch.msgid.link/20260715-get_pages-to-kmalloc-v1-3-b0b7fce288be@nvidia.com
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
mlx4_alloc_priv_pages() allocates a zeroed, page-sized buffer for a
DMA-to-device page list. kmalloc() provides the required physical
contiguity, and a PAGE_SIZE allocation retains the alignment needed to
keep the list within one page.
Use kzalloc() for the buffer and kfree() on the error and teardown paths.
Link: https://patch.msgid.link/20260715-get_pages-to-kmalloc-v1-2-b0b7fce288be@nvidia.com
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
c4iw_reg_user_mr() allocates a page-sized temporary array of DMA
addresses while programming a PBL. The array has no page-specific
requirements, so allocate it with kmalloc() and release it with kfree().
This avoids the casts required by the page allocator and lets the free
operation derive the allocation size from the object.
Link: https://patch.msgid.link/20260715-get_pages-to-kmalloc-v1-1-b0b7fce288be@nvidia.com
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The irdma driver has been audited to confirm that:
1. Methods which do not accept udata input perform an explicit
check for no (or zero value) input.
2. Methods which do accept input perform the correct validation
to ensure that additional udata beyond the kernel's current
ABI definition is zero, and to enforce the required minimum
length.
3. Methods which do not return udata responses use the proper
helper.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-7-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The irdma driver maintains backward compatibility with the
legacy i40iw userspace provider by checking the length of
the user response buffer in irdma_create_qp.
Previously, the check relied on udata->outlen < sizeof(uresp).
That is technically okay since there have only ever been two
sizes for the resp struct (legacy and current). However, it
would be a problem if the resp struct is ever expanded in
the future because it would end up triggering the legacy
fallback path for non-legacy irdma providers that just haven't
moved over to the newer expanded struct yet.
Fix this by explicitly checking for the exact legacy resp size.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-6-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Replace the manual udata input copy and validation during
QP creation with the robust helper.
The irdma driver is backwards compatible with the legacy
i40iw userspace provider. The current create_qp ABI contains
two 8 byte fields. The legacy i40iw ABI was the same but
also contained two additional fields which were never actually
used. Furthermore, the i40iw userspace provider never explicitly
zero-initialized those extra fields, so there is a chance that
existing binaries are passing non-zero garbage values down
to the kernel.
Previously, the irdma driver only copied out the first 16
bytes and did not have any check for the rest of the buffer
being zero, so that additional garbage didn't matter.
By switching to ib_copy_validate_udata_in(), we will now be
checking to ensure that data beyond the kernel's definition
of the request is all zero.
In order to avoid breaking legacy binaries, we therefore need
to increase the request structure size to cover those garbage
fields.
- Legacy binaries will continue to pass down a 32 byte request,
with the driver copying the entire 32 bytes out but ignoring
the second 16 bytes, just as before.
- Newer binaries will pass down the normal 16 byte request. The
ib_copy_validate_udata_in() call will allow this to succeed
because we use user_compl_ctx as our minimum length (16 bytes).
- If the request is ever extended, the new fields would be
added after the "don't use" fields and would work as per
the normal uAPI mechanism.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-5-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Replace the use of ib_copy_from_udata() with
ib_copy_validate_udata_in() where applicable.
For each modified call site, the last argument of
ib_copy_validate_udata_in() was determined by taking
the last member of the ABI struct as per its original
definition (i.e., when it was first committed).
Some methods like irdma_create_cq required special care
because the last member of the current ABI def is beyond
that of the legacy i40iw's ABI def which we need to
remain compatible with. In some other cases like modify_qp,
the legacy i40iw provider never provided any udata at all
so the validation is only performed if inlen > 0.
irdma_create_qp is more challenging because the legacy ABI
was actually larger but the additional fields were never used,
and even worse, never initialized in the provider. This will
be handled in a followup commit.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-4-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Methods that may accept udata input but do not provide a
udata response should use the ib_respond_empty_udata()
helper to ensure that user response buffers are cleared.
Since the ib_respond_empty_udata() call itself can fail if
the user intentionally provides a bogus output buffer, it is
called at the beginning of the method to fail early before
mutating any state that would be difficult to unwind.
Additionally, add missing bounds validation for udata->outlen
in irdma_create_srq() to ensure it is large enough to hold the
response struct as per its original (and so far, only) definition.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-3-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Several methods do not accept udata input and do not provide
a udata response. Use the ib_no_udata_io helper to check that
the input buffers are empty and to zero fill any user response
buffers. For methods that do provide a response, enforce the
input buffer is empty using ib_is_udata_in_empty.
The irdma rdma-core provider as well as the legacy i40iw
provider were both checked to ensure they never passed any
udata to these ops.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-2-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The 'allocated' variable is never non-zero when its value is consumed.
'to_alloc' was always equal to key->len, so replace them with key->len
directly.
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Some editors interpret tabs as 4 spaces while others use 2, causing
ASCII art diagrams in comments to misalign and hurt readability.
Replace tabs with spaces to ensure consistent display across all editors.
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys.
Cc: stable@vger.kernel.org
Fixes: 1d57628ff9 ("dm-pcache: add persistent cache target in device-mapper")
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When setting gc_percent via message, kstrtoul parses the input into an
unsigned long, which is then implicitly truncated to u8 when passed to
pcache_cache_set_gc_percent(). For example, value 266 (0x10A) silently
truncates to 10 (0x0A), successfully bypassing the > 90 upper bound
check in pcache_cache_set_gc_percent(), and setting a different value
than the user intended.
Use kstrtou8 directly instead of kstrtoul, so that overflow values are
properly rejected.
Cc: stable@vger.kernel.org
Fixes: 1d57628ff9 ("dm-pcache: add persistent cache target in device-mapper")
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf().
Fixes: f5db4af466 ("dm raid1: add userspace log")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Krutskih <devsec@tpz.ru>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The helpers for dealing with flexible structures exist, so let's use them.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20250709-flex-array-check-v1-2-8adeb0bf0cde@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
It makes little to no sense to use SIZE_CHECK() on flexible structures, so
let's validate something that actually matters instead.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20250709-flex-array-check-v1-1-8adeb0bf0cde@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
The comparison (target_hz < 0) will always be false because the variable
'target_hz' is of the u32 type.
Remove redundant comparison and simply code around it.
Fixes: 87592da1a4 ("ASoC: codecs: ES8389: Add private members about HPF")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260719221502.536804-1-ethantidmore06@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable and configure the runtime PM autosuspend infrastructure during
the controller probe sequence to safeguard chunked flash operations.
The underlying hardware controller handles memory-mapped page programming
by dividing data transfers into an automated sequence of consecutive
64-byte chunks. To prevent the power management framework from
aggressively gating the interface between these individual chunk frames
or during immediate out-of-band status checks, an explicit 200ms delay
window is required.
Configure this temporal cushion using pm_runtime_set_autosuspend_delay()
and pm_runtime_use_autosuspend() at probe time, ensuring proper cleanup
via pm_runtime_dont_use_autosuspend() in error and driver removal
pathways. This guarantees interface continuity across the full lifecycle
of a multi-chunk write operation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260715222417.2997712-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, dev_fwnode() is added around the 'dev' parameter.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20260708095814.385480-1-jirislaby@kernel.org
