iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised.
Fixes: 12d60c1efc ("iwlwifi: mvm: scrub key material in firmware dumps")
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715220243.355998ec4fbe.I40f3427657b897e911bdf4ebf8e494745508d126@changeid
When a firmware notification version is not in the handler's
size table, iwl_mld_notif_is_valid() falls back to comparing
against the last known structure size but the comparison is
wrong: 'return size < last_known_size' returns true (accept)
for undersized payloads and false (reject) for payloads that
are large enough.
Instead of trying to accept notifications that are large enough,
just refuse the notification. We shouldn't ever get a
notification that is longer than what we expect.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715220243.e0b91efe689d.I7d7604be6819da263e9091370892e6b6f4c57913@changeid
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc.
Fixes: 2b69d242e2 ("wifi: iwlwifi: fw: print PC register value instead of address")
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715220243.a61c65f34e87.Ie5f1a7ca43e0cc5a0ddc8305b0448ddffc09cd18@changeid
The loop should print all bandwidths, the extra * results in
calculating the wrong ARRAY_SIZE() here (of the array inside
the per-bandwidth, not the per-bandwidth array.) Fix that,
and also clarify the array variable assignment.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260715220243.5e1d3448bfca.I6919627382d46605b41b0c6a6f34deedfd45523c@changeid
The bfd_boolean type was gone and converted to the standard bool type
but we have some old code that uses the type. It caused a failure in
the build test.
util/libbfd.c: In function 'slurp_symtab':
util/libbfd.c:94:9: error: unknown type name 'bfd_boolean'
94 | bfd_boolean dynamic = FALSE;
| ^~~~~~~~~~~
util/libbfd.c:94:31: error: 'FALSE' undeclared (first use in this function)
94 | bfd_boolean dynamic = FALSE;
| ^~~~~
util/libbfd.c:94:31: note: each undeclared identifier is reported only once for each function it appears in
util/libbfd.c:102:27: error: 'TRUE' undeclared (first use in this function)
102 | dynamic = TRUE;
| ^~~~
Fix it with standard bool type and constants.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://sourceware.org/pipermail/binutils-cvs/2021-March/056231.html
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The loop for processing syscall args in augment_raw_syscalls has a
history of breaking with Clang updates, see e.g. commit 013eb043f3
("perf trace: Fix BPF loading failure (-E2BIG)") from Clang 15 to 16.
Now, a similar thing happened between Clang 21 and 22. While the issue
is mitigated on the main line by a recent verifier update, it remains
broken on the 6.12 and 6.18 stable branches:
[linux-6.18.y]# sudo perf trace true
libbpf: prog 'sys_enter': BPF program load failed: -E2BIG
libbpf: prog 'sys_enter': -- BEGIN PROG LOAD LOG --
[...]
BPF program is too large. Processed 1000001 insn
processed 1000001 insns (limit 1000000) max_states_per_insn 40 total_states 37941 peak_states 232 mark_read 0
-- END PROG LOAD LOG --
libbpf: prog 'sys_enter': failed to load: -E2BIG
libbpf: failed to load object 'augmented_raw_syscalls_bpf'
libbpf: failed to load BPF skeleton 'augmented_raw_syscalls_bpf': -E2BIG
Error: failed to get syscall or beauty map fd
[...]
The reason is that the loop is quite complex and the BPF verifier often
struggles to prove that it terminates.
Fix the issue by replacing the standard for loop with the bpf_for macro,
which uses a numeric BPF iterator. This should prevent future breakages
of this kind since the verifier has a much easier job proving that the
loop terminates.
Small adjustments were necessary for the loop to make it work. The main
problem is that the verifier sometimes has problems with bpf_for loops
that use a carry-over state, such as the `payload_offset` and `output`
vars here, since the verifier tries to track their values too precisely
and cannot prove loop convergence. To resolve the issue, we (1)
explicitly recompute `payload_offset` in every iteration and (2) use a
trick with adding a global zero to `output` to help the verifier forget
its precise state and use a range instead.
Finally, to keep backwards compatibility with older kernel versions that
don't have bpf_for (i.e. numeric iterators), fall back to standard loop.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Cc: stable@vger.kernel.org
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: a68fd6a6cd ("perf trace: Collect augmented data using BPF")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The BPF program in augmented_raw_syscalls uses a for loop to iterate all
syscall arguments. The loop body is quite complex and often poses
problems for the BPF verifier. As a preparation step for addressing this
issue, factor out the loop body into a separate function.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a wrapper for getting a reference to the NS head.
This would be used in scenarios when we know that getting a reference
would not fail.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
To simply check the number of output lines with and without the option.
Before this series, it failed like below:
$ perf test -v 125
125: perf stat --bpf-counters --for-each-cgroup test:
---- start ----
test child forked, pid 1941516
Normal output has 22 lines, but it now has 54
---- end(-1) ----
125: perf stat --bpf-counters --for-each-cgroup test : FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the evsel, there's an internal struct to put fields need copy when
the evsel is cloned. This is purely to make it easier track those
fields even if it sometimes failed to do so. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
IIUC bpf_fd and bpf_obj fields are not used anymore. It seems like
leftover from 3d6dfae889 ("perf parse-events: Remove BPF event
support").
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The --bpf-counters and --for-each-cgroup options use a set of shared
events among the given cgroups rather than adding events for each cgroup
respectively. It only uses cgroup-ID to compare and calculate the
result. So no need to open and keep FDs for cgroups in BPF mode.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If the realloc for fda->entries succeeds but the realloc for fda->priv
fails, the error path frees the newly allocated entries.
However, fda->entries is neither updated to point to the new entries block
nor cleared to NULL. If realloc moved the allocation to a new block, the
old fda->entries pointer is now freed memory.
When fdarray__exit() is later called to clean up, it executes
free(fda->entries), which would trigger a double-free on that old pointer.
Reported-by: Sashiko Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/20260710200150.11FE71F00A3A@smtp.kernel.org
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
starfive_pcie_host_init() acquires the PHY, clocks/resets, and an
optional regulator in sequence, but does not correctly unwind these
resources when a later step fails.
If starfive_pcie_clk_rst_init() fails after the PHY has already been
successfully enabled, the function returns directly without disabling
the PHY, leaking it and leaving it powered.
If regulator_enable() fails for the optional vpcie3v3 regulator, the
failure is only logged; the function falls through and returns
success, leaving the driver believing the regulator is enabled while
continuing to configure PCIe hardware that may be unpowered. This
also leaves the clocks and PHY enabled with nothing to clean them up.
Disable the PHY on the clk/reset failure path, and disable the
clocks/resets and PHY, then return the error, if the regulator fails
to enable.
Build-tested and boot-tested on StarFive VisionFive 2 v1.2A
Fixes: 05a75df418 ("PCI: starfive: Use regulator APIs to control the 3v3 power supply of PCIe slots")
Fixes: 39b91eb40c ("PCI: starfive: Add JH7110 PCIe controller")
Signed-off-by: Ali Tariq <alitariq45892@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260716102053.185276-1-alitariq45892@gmail.com
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCalj/DwAKCRBcsMJ8RxYu
Y3UMAYCrPzc41SGZdOkoxvO5g3BwGISXYCiCCIFFvnnDXztuiJytgZ+VPH+C7X4J
tlGjRXUBfi8PcoePIbDfPXxay+T/g5Pz29ADyl2UAkxPYRRWeYYxKTyCTBvBdUXS
lMCnv0pSPg==
=Hcay
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This contains mostly a series of bug fixes found by different LLM
models"
* tag 'xfs-fixes-7.2-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (21 commits)
xfs: don't zap bmbt forks if they are MAXLEVELS tall
xfs: clamp timestamp nanoseconds correctly
xfs: fully check the parent handle when it points to the rootdir
xfs: handle non-inode owners for rtrmap record checking
xfs: fix off-by-one error when calling xchk_xref_has_rt_owner
xfs: set xfarray killable sort correctly
xfs: grab rtrmap btree when checking rgsuper
xfs: write the rg superblock when fixing it
xfs: use the rt version of the cow staging checker
xfs: use rtrefcount btree cursor in xchk_xref_is_rt_cow_staging
xfs: don't wrap around quota ids in dqiterate
xfs: move cow_replace_mapping to xfs_bmap_util.c
xfs: make cow repair somewhat flaky when debugging knob enabled
xfs: don't replace the wrong part of the cow fork
xfs: resample the data fork mapping after cycling ILOCK
xfs: fix null pointer dereference in tracepoint
xfs: use xfs_csn_t for xlog_cil_push_now() push_seq parameter
xfs: tie zoned sysfs lifetime to zone info
xfs: fail recovery on a committed log item with no regions
xfs: splice unsorted log items back to the transaction after the loop
...
- Fix sanity checks for ztailpacking tail pclusters to avoid
false corruption reports
- Use more informative s_id for file-backed mounts
- Hide the meaningless "cache_strategy=" mount option on plain
(uncompressed) filesystems
- Remove the unneeded erofs_is_ishare_inode() helper
-----BEGIN PGP SIGNATURE-----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=3hh+
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-7.2-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix sanity checks for ztailpacking tail pclusters to avoid
false corruption reports
- Use more informative s_id for file-backed mounts
- Hide the meaningless "cache_strategy=" mount option on plain
(uncompressed) filesystems
- Remove the unneeded erofs_is_ishare_inode() helper
* tag 'erofs-for-7.2-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: hide "cache_strategy=" for plain filesystems
erofs: get rid of erofs_is_ishare_inode() helper
erofs: relax sanity check for tail pclusters due to ztailpacking
erofs: use more informative s_id for file-backed mounts
- Make cpufreq_update_pressure() use cpuinfo.max_freq as the default
reference frequency when arch_scale_freq_ref() returns 0 to allow
the scheduler to still take CPU frequency caps into account in those
cases (Rafael Wysocki)
- Use the HWP guaranteed performance level as the full capacity
performance in intel_pstate on hybrid systems when turbo frequencies
are not allowed to be used to make scale-invariance work as expected
in those cases (Rafael Wysocki)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmpY4CcSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1nTgH+QHXf2KIXDZBVn3iroiZbdPF9h6iBfnh
XKn1wahWy/d41leF1g19yQL5UD+dztKRnn4Ek5ihMT7doAgqpCYAR//s/e5IDHai
FVoFhyiNoxlbm1A7qbq4F1X4tlnU1mfIj676W+SKa7Hn1KMnRL9kerJGsS6oq6cH
L56snK9LOxSYDXDjYqBZQtg7W3GVoqw0pjWdKMVU3faTHTl4SuTAfoHFNHSd2dMh
oZd9xKPWxGPOwKctmrWb4MpwW2eMJNrclWnpixPhAfXRPWm5qvZm/jtroSZ2y5pN
nHrd2jTHiINnaiqMzZgvydVIy5XgXx9Ero7+/Syw2NBEcHQ1KcocQTg=
=dMjb
-----END PGP SIGNATURE-----
Merge tag 'pm-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the intel_pstate driver and one
in the core:
- Make cpufreq_update_pressure() use cpuinfo.max_freq as the default
reference frequency when arch_scale_freq_ref() returns 0 to allow
the scheduler to still take CPU frequency caps into account in
those cases (Rafael Wysocki)
- Use the HWP guaranteed performance level as the full capacity
performance in intel_pstate on hybrid systems when turbo
frequencies are not allowed to be used to make scale-invariance
work as expected in those cases (Rafael Wysocki)"
* tag 'pm-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Make cpufreq_update_pressure() fall back to cpuinfo.max_freq
cpufreq: intel_pstate: Set non-turbo capacity to HWP_GUARANTEED_PERF()
spi_geni_init() reuses 'ret' after it has already been set by the
runtime PM acquire check earlier in the function. When an invalid
protocol is later detected, the function returns this stale 'ret'
value instead of a proper error code, so it can end up returning 0
(or some other non-error value) even though the protocol check
failed.
Fix this by returning -EINVAL directly on both invalid-proto paths.
Fixes: d8e9ea989a ("spi: qcom-geni: Fix missing error check on pm_runtime_get_sync()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202607122241.qzP3QAXF-lkp@intel.com/
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-fix_return_error_code-v1-1-3295003aacd5@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- imx: Assign child domains for imx93 to prevent power off when in use
- imx: Fix i.MX8MP power up sequences
- mediatek: Fix possible nullptr in HWV cleanup/on-check
-----BEGIN PGP SIGNATURE-----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=tWH8
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"imx:
- Assign child domains for imx93 to prevent power off when in use
- Fix i.MX8MP power up sequences
mediatek:
- Fix possible nullptr in HWV cleanup/on-check"
* tag 'pmdomain-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check
pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
pmdomain: imx: Fix i.MX8MP power notifier
pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
dt-bindings: power: imx93: Add MIPI PHY power domain
Compare the sampled clock values instead of their addresses. Comparing
addresses leaves the samples unsorted, preventing the code from discarding
the minimum and maximum samples.
Fixes: 1a53924792 ("drm/i915/selftests: Measure CS_TIMESTAMP")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260714220430.238433-1-emreleno@gmail.com
(cherry picked from commit 682ea2d28d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The UV/Y plane DDB entriess are never cleared on
sk_wm_plane_disable_noatomic() and can leave stale DDB state
for NV12 planes on pre-Gen11 devices
Fixes: d34b59d5ba ("drm/i915: Add skl_wm_plane_disable_noatomic()")
Assisted-by: Copilot:claude-sonnet-4.6
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260615203355.218578-2-vinod.govindapillai@intel.com
(cherry picked from commit 60f68a6ba2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT
(Interrupt Request Status) register layout documented in Table 15
of the LTC3676/LTC3676-1 datasheet:
bit 0 - Pushbutton Status Active
bit 1 - Hard Reset Occurred
bit 2 - PGOOD Timeout Occurred
bit 3 - Undervoltage Warning
bit 4 - Undervoltage Standby (Fault) Occurred
bit 5 - Overtemperature Warning
bit 6 - Overtemperature Standby (Fault) Occurred
bit 7 - Reserved
The driver instead defines these starting at bit 3, one bit higher
than the datasheet specifies, which causes ltc3676_regulator_isr()
to check the wrong status bits and misreport (or miss) PGOOD
timeout, undervoltage and thermal warning/fault conditions.
Fix the bit offsets to match the datasheet.
Fixes: 37b918a034 ("regulator: Add LTC3676 support")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Ojha <Abhishek.ojha@savoirfairelinux.com>
Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When ksmbd validates a compound (chained) SMB2 request,
ksmbd_smb2_check_message() reads pdu->StructureSize2 without first
checking that the compound element is large enough to contain it.
StructureSize2 is a 2-byte field at offset 64
(__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element.
The compound-walking logic only guarantees that a full 64-byte SMB2
header is present for the trailing element: when NextCommand is 0, len is
reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A
remote client can craft a compound request whose last element has exactly
64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte
past the receive buffer, producing a slab-out-of-bounds read.
BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14
The buggy address is located 172 bytes inside of allocated 173-byte region
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
handle_ksmbd_work (fs/smb/server/server.c:119)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Reject any compound element that is too small to hold StructureSize2
before dereferencing it.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb3_preauth_hash_rsp() computes the SMB3.1.1 preauth integrity hash on
the response path. For a binding SESSION_SETUP it looks up the
per-connection preauth_session and reads its Preauth_HashValue.
smb2_sess_setup() frees that preauth_session under ksmbd_conn_lock().
Two SMB2 requests on one connection can run concurrently, so an unlocked
lookup and hash can use a preauth_session after another worker frees it.
Take ksmbd_conn_lock() before selecting conn->binding and hold it across
the selected preauth hash lookup and update. This preserves the existing
hash selection while preventing the lookup-to-use lifetime race.
Fixes: 1c5daa2ea9 ("ksmbd: handle channel binding with a different user")
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown.
Fixes: faf8578c77 ("ksmbd: find bound sessions during reauthentication")
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 4b706360ff ("ksmbd: fix multichannel binding and enforce channel
limit") moved the binding-path session key out of the session-wide
sess->sess_key (CIFS_KEY_SIZE = 40) into a new per-channel buffer, and
sized both that buffer and the on-stack copy used during binding with
SMB2_NTLMV2_SESSKEY_SIZE (16):
struct channel {
char sess_key[SMB2_NTLMV2_SESSKEY_SIZE]; /* 16 */
...
};
ntlm_authenticate() / krb5_authenticate():
char channel_key[SMB2_NTLMV2_SESSKEY_SIZE] = {}; /* 16 */
char *auth_key = conn->binding ? channel_key : sess->sess_key;
The two writers that fill this destination still bound the copy length
against CIFS_KEY_SIZE (40), not against the 16-byte buffer:
ksmbd_decode_ntlmssp_auth_blob() (NTLM key exchange):
if (sess_key_len > CIFS_KEY_SIZE) /* 40 */
return -EINVAL;
arc4_crypt(ctx_arc4, sess_key,
(char *)authblob + sess_key_off, sess_key_len);
ksmbd_krb5_authenticate():
if (resp->session_key_len > sizeof(sess->sess_key)) /* 40 */
...
memcpy(sess_key, resp->payload, resp->session_key_len);
On a binding SESSION_SETUP, auth_key points at the 16-byte channel_key,
so a client that supplies an NTLM EncryptedRandomSessionKey of up to 40
bytes (with NTLMSSP_NEGOTIATE_KEY_EXCH), or a Kerberos ticket whose
session key is longer than 16 bytes (a normal AES256 key is 32), writes
past the 16-byte stack buffer -- up to a 24-byte kernel stack overflow.
KASAN reports it as a stack-out-of-bounds write in arc4_crypt() called
from ksmbd_decode_ntlmssp_auth_blob().
The destinations must be able to hold the full session key the length
checks already permit. Size the per-channel key buffer and the two
on-stack channel_key buffers with CIFS_KEY_SIZE, matching sess->sess_key.
Fixes: 4b706360ff ("ksmbd: fix multichannel binding and enforce channel limit")
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
On an SMB2 SET_INFO(FileRenameInformation) whose target names an alternate
data stream, smb2_rename() obtains a formatted stream-name string from
ksmbd_vfs_xattr_stream_name(), which allocates it with kasprintf() and
returns it through an out-param:
rc = ksmbd_vfs_xattr_stream_name(stream_name, &xattr_stream_name, ...);
if (rc)
goto out;
rc = ksmbd_vfs_setxattr(..., xattr_stream_name, ...);
if (rc < 0) {
...
goto out;
}
goto out;
xattr_stream_name is declared inside the alternate-data-stream block, but
the out: label is outside that block and frees only new_name, so it cannot
release xattr_stream_name. ksmbd_vfs_setxattr() takes a const char * and
only reads the name, so it does not take ownership either. Both the
setxattr-failure and the success path therefore leak the kasprintf()'d
string. An authenticated client with a writable share can leak kernel
memory on every stream rename, exhausting kernel memory over time.
Free xattr_stream_name after its use, before the block's goto out. The
two earlier goto out paths never assign the variable, so there is no
double-free.
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 6b9a2e09d4 ("ksmbd: avoid zeroing the read buffer in smb2_read()")
switched the SMB2 READ payload buffer from kvzalloc() to kvmalloc(), on the
premise that only the nbytes actually read are ever transmitted, so the
ALIGN(length, 8) tail need not be initialized.
That premise does not hold for a compound response. ksmbd_vfs_read() fills
only nbytes, leaving [nbytes, ALIGN(length, 8)) uninitialized. The aux
payload is pinned as the last response iov with iov_len == nbytes, but when
the READ is a member of a compound, init_chained_smb2_rsp() 8-byte-aligns
the previous member by extending that same iov:
new_len = ALIGN(len, 8);
work->iov[work->iov_idx].iov_len += (new_len - len);
inc_rfc1001_len(work->response_buf, new_len - len);
so up to 7 uninitialized bytes of the kvmalloc()'d slab tail are sent
to the client. When the read length is small the buffer is served from
a general kmalloc slab, so those bytes can be stale kernel-heap
contents, including pointer values -- an information leak usable to
defeat KASLR.
An authenticated client triggers it with a compound request containing a
READ whose returned nbytes is not 8-aligned (for example [READ, CLOSE] with
a 1-byte read).
Zero only the alignment tail after the read, preserving the bulk
no-zeroing optimization of 6b9a2e09d4.
Fixes: 6b9a2e09d4 ("ksmbd: avoid zeroing the read buffer in smb2_read()")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn
pointer in an async ksmbd_work and then queue that work on ksmbd-io. The
work only increments conn->r_count, which prevents teardown from passing
the pending-request wait after the increment, but it does not pin the
struct ksmbd_conn object.
If connection teardown races with an oplock break notification, the last
conn reference can be dropped before the queued worker finishes. The
worker then uses the freed conn in ksmbd_conn_write() and
ksmbd_conn_r_count_dec().
Take a real conn reference when publishing the conn pointer to the async
work item, and drop it after the notification work has decremented
r_count. Apply the same lifetime rule to lease break notification, which
uses the same work->conn pattern.
Fixes: 3aa660c059 ("ksmbd: prevent connection release during oplock break notification")
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_file_allocation_info() converts the client-supplied
FILE_ALLOCATION_INFORMATION::AllocationSize into a 512-byte block
count with:
alloc_blks = (le64_to_cpu(file_alloc_info->AllocationSize) + 511) >> 9;
AllocationSize is a fully client-controlled __le64 field; the only
validation performed by the caller (smb2_set_info_file(), case
FILE_ALLOCATION_INFORMATION) is that the fixed buffer is at least
sizeof(struct smb2_file_alloc_info) == 8 bytes. The value itself is
never range-checked before this arithmetic.
When AllocationSize is close to U64_MAX (e.g. 0xffffffffffffffff),
"AllocationSize + 511" wraps around mod 2^64 to a small number
(0xffffffffffffffff + 511 = 510), so alloc_blks becomes 0. Since any
existing regular file has stat.blocks > 0, the function then takes
the "shrink" branch and calls:
ksmbd_vfs_truncate(work, fp, alloc_blks * 512); /* == 0 */
silently truncating the file to size 0, even though the client asked
to grow the allocation to (what looks like) the maximum possible
size. The trailing "if (size < alloc_blks * 512) i_size_write(inode,
size);" restore is guarded by a comparison that is never true once
alloc_blks == 0, so the truncation is not undone. This lets an
authenticated SMB client that already holds an open handle with
FILE_WRITE_DATA on a file silently truncate that same file to size 0
via a single crafted SET_INFO(FILE_ALLOCATION_INFORMATION) request
advertising a near-U64_MAX AllocationSize, even though the request
asks to grow the file's allocation rather than shrink it. This is a
functional/data-loss bug, not a privilege-boundary
violation: the same client could already truncate the file via
FILE_END_OF_FILE_INFORMATION or a plain write.
Fix it by validating AllocationSize against MAX_LFS_FILESIZE, the
same upper bound the VFS itself uses to reject unrepresentable file
sizes, before doing the "+511" rounding, and rejecting oversized
values with -EINVAL. Bounding AllocationSize to
MAX_LFS_FILESIZE - 511 guarantees the "+511" addition cannot wrap,
and that the subsequent "alloc_blks * 512" values passed to
vfs_fallocate() and ksmbd_vfs_truncate() stay within a representable
loff_t as well.
No legitimate SMB client asks for an allocation size anywhere near
2^64 bytes, so this only rejects a value that was previously
silently misinterpreted as zero.
Runtime-verified on a v6.19 KASAN test stand: sending SET_INFO
(FILE_ALLOCATION_INFORMATION) with AllocationSize = 0xffffffffffffffff
against ksmbd now returns -EINVAL and leaves the target file's size
unchanged, where the unpatched kernel truncated it from 4096 to 0
bytes.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit e0c48e42d8 ("usb: typec: ucsi: yoga-c630: remove
duplicate AltModes").
The yoga_c630 driver previously implemented its own duplicate altmode
detection in yoga_c630_ucsi_update_altmodes() to work around buggy EC
firmware that returns duplicate AltModes instead of empty ones.
With the introduction of the common ucsi_altmode_is_duplicate() helper
in both the standard and nvidia registration paths, duplicate detection
is now handled automatically in the core UCSI code. This makes the
yoga_c630-specific implementation added in commit e0c48e42d8 ("usb:
typec: ucsi: yoga-c630: remove duplicate AltModes") redundant.
Remove yoga_c630_ucsi_update_altmodes() and its callback to eliminate
code duplication and simplify the driver. Note that this causes the
driver to switch back from the nvidia registration path to the standard
path, which is the original behavior before commit e0c48e42d8 ("usb:
typec: ucsi: yoga-c630: remove duplicate AltModes"). Both paths now
include duplicate detection, ensuring the firmware bug is still properly
handled.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20260713084323.287516-3-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the duplicate altmode detection to ucsi_register_altmodes_nvidia()
which is used when a driver provides the update_altmodes() callback.
This ensures all drivers benefit from duplicate detection, whether they
use the standard registration path or the nvidia path with update_altmodes
callback.
Without this fix, drivers using the nvidia path (like yoga_c630) would
still encounter duplicate altmode registration errors from buggy firmware.
Fixes: a79f16efcd ("usb: typec: ucsi: Add support for the partner USB Modes")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20260713084323.287516-2-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some firmware implementations incorrectly return the same altmode
multiple times at different offsets when queried via
UCSI_GET_ALTERNATE_MODES. This causes sysfs duplicate filename errors
and kernel call traces when the driver attempts to register the same
altmode twice:
sysfs: cannot create duplicate filename '/devices/.../typec/port0/port0.0/partner'
typec-thunderbolt port0-partner.1: failed to create symlinks
typec-thunderbolt port0-partner.1: probe with driver typec-thunderbolt failed with error -17
The matching rules differ by recipient:
- UCSI_RECIPIENT_CON (port) and UCSI_RECIPIENT_SOP_P (plug):
Two altmodes with identical SVID and VDO are byte-for-byte
duplicates and the second has no observable function, so drop it.
- UCSI_RECIPIENT_SOP (partner):
The typec class binds each partner altmode to a port altmode of
the same SVID via altmode_match()/device_find_child(), which
returns the first port altmode with a matching SVID. If the
partner advertises more altmodes for SVID X than the port
advertises, the surplus partner altmode(s) collapse onto an
already-paired port altmode and trigger the
"duplicate filename .../partner" sysfs error during
typec_altmode_create_links(). Use the port-side altmode count for
SVID X as the authoritative cap and reject any partner altmode
that would exceed it. This preserves legitimate multi-Mode
partner altmodes (vendor SVIDs that the port really does
advertise more than once) while filtering the firmware-generated
duplicates that have no port counterpart, and is therefore
stricter than a plain SVID+VDO comparison (which still admits the
Thunderbolt case where firmware reports the same SVID twice with
different VDOs) without being over-broad like a plain SVID match
(which would falsely drop legitimate vendor multi-Mode entries).
If a duplicate is detected, skip it and emit a clean warning instead
of generating a kernel call trace:
ucsi_acpi USBC000:00: con2: Firmware bug: duplicate partner altmode SVID 0x8087 at offset 1, ignoring.
ucsi_acpi USBC000:00: con2: VDO mismatch: 0x8087a043 vs 0x00000001
The duplicate detection logic lives in a reusable helper
ucsi_altmode_is_duplicate() and is invoked from
ucsi_register_altmodes(). It applies to all three recipient types:
partner (SOP), port (CON), and plug (SOP_P) altmodes.
Fixes: a79f16efcd ("usb: typec: ucsi: Add support for the partner USB Modes")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
unchanged: still SVID+VDO exact-dup match.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260713084323.287516-1-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the
"emulated single-request FIFO" fast-path in dummy_queue() reuses for
small IN transfers: it copies the caller's request into it
(req->req = *_req) and queues it, treating list_empty(&fifo_req.queue)
as "the slot is free".
The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows
the standard pattern: list_del_init(&req->queue) unlinks the request,
then the lock is dropped and usb_gadget_giveback_request() invokes
req->complete(). But list_del_init() makes fifo_req.queue look empty
*before* the completion callback returns, so a concurrent dummy_queue()
on another CPU sees the slot as free, reuses fifo_req and runs
req->req = *_req -- overwriting req->complete while dummy_timer is
mid-calling it. The indirect call then jumps to a clobbered pointer,
causing a general protection fault / page fault in dummy_timer
(syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an
in-bounds memcpy on a live shared object, so KASAN cannot flag it.
Add a fifo_req_busy bit covering the shared request's whole lifetime:
set it in dummy_queue() when the FIFO fast-path takes fifo_req (making
it the fast-path guard, replacing the list_empty(&fifo_req.queue)
test), and clear it after the completion callback has returned, via a
dummy_giveback() helper used at all four gadget-request giveback
sites. The shared slot can no longer be reused until its completion
callback has finished.
Reported-by: syzbot+faf3a6cf579fc65591ca@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=faf3a6cf579fc65591ca
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/5db8bba5b3499a86cd2e776f9918126b68b2508b.1784198306.git.wangjinchao600@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The probe() calls pm_runtime_use_autosuspend(), but remove() does not call
pm_runtime_dont_use_autosuspend(). This can lead to a usage_count leak if
autosuspend_delay is set to a negative value.
The pm_runtime_use_autosuspend() also notes that it's important to undo
this with pm_runtime_dont_use_autosuspend() at driver exit time.
Fixes: 1f874edcb7 ("usb: chipidea: add runtime power management support")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-sonnet-4.6
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260716104126.2763454-1-xu.yang_2@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a lock to the function bos_descriptors_read().
This function accesses udev->bos, which could be simultaneously freed in
usb_reset_and_verify_device(), a function that is commonly called in
drivers all over the kernel.
Assisted-by: gkh_clanker_t1000
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260715-usb_core_patches_3-v1-1-53021f5576fd@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately.
Fixes: ffbe2feac5 ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260713114711.955253-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path.
Fixes: 11110783f5 ("usb: Inform the USB Type-C class about enumerated devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260611071201.1235545-1-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When logging the decode of a data abort we currently unconditionally decode
and display Xs. Currently the only defined non-RES0 values for this field
are for cases where ISV=1, move the decode of Xs into our existing check
for ISV=1. This avoids potential confusion if some other use is assigned to
these bits for ISV=0 cases in future, or misleading someone into thinking
there is a meaningful value there with currently defined architecture.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The Longmai Technologies USB Key (0x04b4:0xb708) advertises itself as a
SCSI/Bulk-only mass storage device but does not correctly handle ATA
pass-through commands. When such a command (ATA_12 or ATA_16) is sent to
the device it fails to respond and the transfer eventually times out,
leaving the device unusable.
Add an unusual_devs entry for this device that sets the US_FL_NO_ATA_1X
flag, so usb-storage short-circuits ATA pass-through commands and returns
INVALID COMMAND OPERATION CODE (0x20 0x05 0x24 0x00) instead of forwarding
them to the device.
Information about the device in /sys/kernel/debug/usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=06 Prot=50 MxPS=64 #Cfgs= 1
P: Vendor=04b4 ProdID=b708 Rev= 1.00
S: Manufacturer=Longmai Technologies
S: Product=USB Key
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Reported-by: Ai Chao <aichao@kylinos.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: Huang Wei <huangwei@kylinos.cn>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260716033341.2830872-1-huangwei@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Admin-only PF mode does not expose media or 3D execution capabilities
to userspace, so display pipelines cannot receive rendered content.
Fixes: d88c4bac8c ("drm/xe/pf: Restrict device query responses in admin-only PF mode")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260714053259.504308-2-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 7ef55ae582)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
This adds support for TQMa95xxLA modules, designed to be soldered
on a carrier board. MBa95xxCA is a carrier reference board / starter kit
design.
There is a common device tree for all variants with e.g. reduced
CPU core / feature count.
Enable the external accessible PCIe controllers as host,
add clocking and reset GPIO. While at it, add hogs for GPIO
lines from the M.2 slots until M.2 connector driver is available.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
GuC exec queue destruction can run asynchronously. If the final device
put happens from a destroy worker, drmm cleanup can end up draining
the same workqueue and deadlock.
Hold a drm_device reference for the queue lifetime and drop it after
queue teardown completes. This keeps drmm cleanup from running while
async destroy work is still pending.
Move GuC destroy work to a module-lifetime Xe workqueue and flush it
on PCI remove so hot-unbind/rebind still waits for pending destroy work.
With queue-held device refs, guc_submit_sw_fini() cannot run with live
GuC IDs. Replace the fini wait with an assertion and remove the unused
fini_wq.
v2:
- Rebase
v3:
- Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt)
- Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt)
- Drop separate deferred drm_dev_put worker.
- Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini().
v4:
- Replace the guc_submit_sw_fini() wait with an assertion and remove
the now-unused fini_wq. (sashiko)
v5:
- Move destroy work to a module-lifetime Xe workqueue instead of
system_dfl_wq. (Matt)
- Flush the module-lifetime destroy workqueue during PCI remove to
preserve the old device-remove wait semantics.
v6:
- Keep SVM pagemap destroy work on the per-device destroy_wq to avoid
letting it outlive the xe_device/drm_device. (Sashiko)
- Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work
can be queued from the reclaim path.
v7:
- Drop the per-device xe->destroy_wq and use the module-level destroy WQ
for SVM pagemap destroy as well. (Matt)
- Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*()
helpers because the WQ is no longer exec-queue specific. (Matt)
v8:
- Rebase.
v9:
- Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM
destroy_wq because it can be queued from reclaim and embeds
the dev_pagemap used by devres teardown. (Sashiko)
- Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM
from it.
- Update the module-WQ kdoc to document the GuC/SVM split.
v10:
- Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the
workqueue allocation warning.
v11:
- Drop the SVM pagemap destroy comment as it was revision-specific.
(Thomas)
v12:
- Rebase.
Fixes: 2d2be279f1 ("drm/xe: fix UAF around queue destruction")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Link: https://patch.msgid.link/20260716062624.211396-1-arvind.yadav@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit da1124abac)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
Fixes: 6bd90e700b ("drm/xe: Make dma-fences compliant with the safe access rules")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260714064402.2457257-1-arvind.yadav@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 41075f0eb5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
xe_pt_update_ops_init() fails to reset current_op to 0. On the
vm_bind path, ops_execute() calls xe_pt_update_ops_prepare() inside
the xe_validation_guard() / drm_exec_until_all_locked() loop. When
that loop retries due to lock contention or OOM eviction
(drm_exec_retry_on_contention() / xe_validation_retry_on_oom()),
xe_pt_update_ops_prepare() runs again on the same vops, and each
call to bind_op_prepare() increments current_op without resetting it.
After N retries current_op exceeds the array size allocated by
xe_vma_ops_alloc(), causing an out-of-bounds write into
SLUB-poisoned memory and a subsequent UAF crash in
xe_migrate_update_pgtables_cpu() when reading the corrupted pt_op->bind.
Also reset needs_svm_lock and needs_invalidation which are derived in
the same prepare pass and would otherwise cause wrong migrate ops
selection and redundant TLB invalidation on retry.
Fix this by resetting current_op, needs_svm_lock and needs_invalidation
in xe_pt_update_ops_init().
v2 (Matt):
- Add details in commit message.
- Add Fixes tag and Cc to stable@vger.kernel.org
Fixes: e8babb280b ("drm/xe: Convert multiple bind ops into single job")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Signed-off-by: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260714232433.2737533-1-zongyao.bai@intel.com
(cherry picked from commit 046045543e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
