This reverts commit b145c3f29d.
The deduplication logic appears to cause issues with separate
SBU muxes. The mode-switch call on these (like gpio-sbu-mux)
never appeared, so no successful mode-switch happened. The more
high-end Parade PS883X redrivers are not affected due to being
retimer-switch. The revert fixes dp altmode mode-switch for both.
Tested on:
Lenovo Thinkbook 16 G7 QOY
Lenovo Ideapad 5 2in1 14Q8X9
Microsoft Windows Dev Kit 2023 (Blackrock)
Lenovo Thinkpad T14s G6
Fixes: b145c3f29d ("usb: typec: mux: avoid duplicated mux switches")
Cc: stable <stable@kernel.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260530-typc-mux-modeset-v1-1-64b0281e2cd6@oldschoolsolutions.biz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
List of power domains in arrays of 'struct rpmhpd' are sorted according
to index name (the define, e.g. RPMHPD_MX), not by actual numerical
value. Fix few sorting mistakes, so comparing the tables between
different devices will be easier. No functional impact - same binary.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()`
because the buffer is not marked uptodate, even though its in-memory
contents are valid and are about to be overwritten.
To prevent this spurious warning, unconditionally set the `BH_Uptodate`
flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and
`udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and
matches the workaround previously applied to `udf_close_lvid()` in commit
853a0c25ba ("udf: Mark LVID buffer as uptodate before marking it dirty").
Extending this workaround ensures consistent behavior across all LVID
updates.
Buffer I/O error on dev loop0, logical block 128, lost sync page write
------------[ cut here ]------------
!buffer_uptodate(bh)
WARNING: fs/buffer.c:1087 at mark_buffer_dirty+0x299/0x410 fs/buffer.c:1087
...
Call Trace:
<TASK>
udf_open_lvid+0x369/0x5b0 fs/udf/super.c:2078
udf_reconfigure+0x336/0x540 fs/udf/super.c:679
reconfigure_super+0x232/0x8f0 fs/super.c:1080
vfs_cmd_reconfigure fs/fsopen.c:268 [inline]
vfs_fsconfig_locked+0x171/0x320 fs/fsopen.c:297
__do_sys_fsconfig fs/fsopen.c:463 [inline]
__se_sys_fsconfig+0x6b9/0x810 fs/fsopen.c:350
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
</TASK>
Fixes: 853a0c25ba ("udf: Mark LVID buffer as uptodate before marking it dirty")
Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot
Reported-by: syzbot+0306b38d9ed6ef71467d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0306b38d9ed6ef71467d
Link: https://syzkaller.appspot.com/ai_job?id=05f8e20f-f080-4c7f-a206-08dbc15cb4a1
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Link: https://patch.msgid.link/6ffb2ca8-e22f-4fd6-9f37-7202ec0878bd@mail.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
udf_table_prealloc_blocks() and udf_table_new_block() call
udf_delete_aext() on the unallocated-space-table inode while holding
sbi->s_alloc_mutex. When the deleted allocation descriptor empties an
allocation-extent (AED) block, udf_delete_aext() returns that block to
free space via udf_free_blocks(). For a table-managed partition that
path is udf_free_blocks() -> udf_table_free_blocks() ->
mutex_lock(&sbi->s_alloc_mutex), i.e. the task tries to acquire a mutex
it already holds.
On a PREEMPT_RT kernel the rtmutex deadlock detector reports this as
-EDEADLK:
rtmutex deadlock detected
WARNING: kernel/locking/rtmutex.c:1698 at rt_mutex_handle_deadlock
udf_table_free_blocks fs/udf/balloc.c:376 [inline]
udf_free_blocks+0xa8c/0x1900 fs/udf/balloc.c:678
udf_delete_aext+0x4f5/0xc00 fs/udf/inode.c:2381
udf_table_prealloc_blocks fs/udf/balloc.c:544 [inline]
udf_prealloc_blocks+0xbd4/0x10e0 fs/udf/balloc.c:702
On a non-RT kernel the same path is a hard self-deadlock (or a lockdep
recursive-locking splat). It is reachable from a crafted UDF image via
the write/sendfile path.
The allocator already refuses to recurse on the add side: see the
comment in udf_table_free_blocks() explaining why it must not call
udf_add_aext() while holding s_alloc_mutex. Apply the same rule to the
delete side. Let udf_delete_aext() report the AED block it would
otherwise free through a new out-parameter, and have the two callers
that hold s_alloc_mutex free it after dropping the lock. The block is
already unlinked from the inode's descriptor chain by then, so nothing
can reference it in the meantime. All other callers pass NULL and keep
freeing the block inline, exactly as before.
The out-parameter is pre-initialised with the reserved partition number
0xFFFF, which can never name a real block, so the caller can tell
whether a block was handed back.
Reported-by: syzbot+6a680377e13041c19d50@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6a680377e13041c19d50
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://syzkaller.appspot.com/bug?extid=6a680377e13041c19d50
Link: https://patch.msgid.link/20260621035841.56194-1-kartikey406@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Long allocation descriptors carry an on-disk
extLocation.partitionReferenceNum. udf_current_aext() copies that value
into a kernel_lb_addr and returns it to several consumers.
If the partition reference is outside s_partitions, callers can later
index s_partmaps out of bounds. The truncate/free path can pass such an
extent to udf_free_blocks(), where the invalid partition reference
causes a slab out-of-bounds read.
Validate eloc->partitionReferenceNum in udf_current_aext() before
returning a decoded extent. This rejects invalid file extents and
indirect allocation descriptor extents in the common parser, so callers
do not need to duplicate the partition-map bounds check.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Link: https://patch.msgid.link/20260612225846.97678-1-kylebot@openai.com
Signed-off-by: Jan Kara <jack@suse.cz>
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
imx8mp_vpu_power_notifier() for i.MX8MP.
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
parse_dfs_referrals() validates that the response header and referral
array fit in the received buffer, but each referral also contains string
offsets supplied by the server.
Those offsets are used to compute the DfsPath and NetworkAddress string
pointers without checking whether they still point inside the response
buffer. A malformed referral can therefore make the computed pointer
exceed the end of the buffer. The resulting negative max_len is then
passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it
to kstrndup() as a size_t, allowing strnlen() to read out of bounds.
Validate each string offset before deriving the string pointer.
Fixes: 4ecce920e1 ("CIFS: move DFS response parsing out of SMB1 code")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In dfs_cache.c, the helper functions alloc_target(), setup_referral(),
and update_cache_entry_locked() currently utilize GFP_ATOMIC to
allocate memory.
However, all of these functions are executed in sleepable conditions.
Use GFP_KERNEL instead, to reduce the risk of allocation failure and
stop putting unnecessary pressure on emergency memory pools in
low-memory scenarios.
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use.
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add MIPI PHY power domain for shared PHY resources used by both
MIPI DSI and CSI blocks.
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Update the probe function to utilize the new
typec_cable_altmode_unsupported() helper. If the cable doesn't support
DisplayPort altmode, don't initialize altmode_ops and prevent altmode
from being activated.
A captive cable shouldn't be checked; it may not provide discoverable
capability information, but it is inherently designed to support the
device's requirements.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260626142702.1941182-4-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the probe function to utilize the new
typec_cable_altmode_unsupported() helper. If the cable doesn't support
Thunderbolt altmode, don't initialize altmode_ops and prevent altmode
from being activated.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260626142702.1941182-3-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce typec_cable_altmode_unsupported function to evaluate whether an
alternate mode is restricted based on the connected cable's properties.
Implement validation logic that parses the cable's identity to catch
incompatible setups early. Alternate modes are restricted over:
- cables lacking an identity header
- passive cables with USB 2.0 speed
- active cables unless they have corresponding plugs
The function returns false if the cable is not registered or the identifier
is not set.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260626142702.1941182-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Fixes: 776976a67a ("usb: gadget: r8a66597-udc: cleanup error path")
Issue found using a prototype static analysis tool
and confirmed by code review.
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Signed-off-by: Slavin Liu <220245772@seu.edu.cn>
Link: https://patch.msgid.link/20260624140908.1282-1-getshell@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some docks/Type-C dongles expose a malformed DP Capabilities VDO: they
claim a DFP_D (source) or UFP_D (sink) capability but leave the
corresponding pin assignment field empty. Such a device can never have
Alt Mode configured. Currently the driver still proceeds, which is
misleading and offers no diagnostic.
Per VESA DPAM v2.1a Section 5.4.1 (Table 5-6):
Case 1 (receptacle): A DP Source device receptacle (DFP_D) declares its
lane routing in the DP Source Pin field (Bits 15:8); a DP Sink device
receptacle (UFP_D) declares its lanes in the DP Sink Pin field
(Bits 23:16).
Case 2 (direct-attach plug): A DP Sink device plug (UFP_D) declares its
lane routing in the DP Source Pin field (Bits 15:8), and a DP Source
device plug (DFP_D) declares its lanes in the DP Sink Pin field
(Bits 23:16).
In either case the field holds the supported pin assignment values
(e.g. C/D/E); 00000000b means no pin assignment is supported for that
capability.
Reject such a DP Alt Mode VDO in dp_altmode_probe(): if the claimed
capability has no matching pin assignments, fail probe with -ENODEV,
releasing the SOP' plug reference on the error path.
Signed-off-by: Madhu M <madhu.m@intel.com>
Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260623003215.4077711-1-madhu.m@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define named masks for Power Status fields (connection and source/sink)
and reuse them consistently for both field extraction and value
construction. This avoids raw bit usage, keeps the definitions aligned.
No functional change.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/fdf373fd9d98ba68c72cfa9e89b4e9bddf06aea8.1779214249.git.radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Operating without an interrupt line and using the driver's polling path
is valid. So move the log level to debug instead of warning.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/7d14634eb5f4f7f2e217cd0080e3288eb63fc940.1779214249.git.radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Log an error when the vendor ID read fails or returns zero, including
the I2C error code and register value, and initialize the vendor ID
variable to avoid logging an uninitialized value on read failure.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/0aa487d3f054b34689e95760fefd72f7571f64c9.1779214249.git.radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace reset_control_assert()/deassert() with reset_control_reset().
For dwc3-xilinx, reset_control_reset() routes via the zynqmp reset
driver and uses PM_RESET_ACTION_PULSE, which performs assert and
deassert in firmware. This results in a single SMC call issuing a
reset pulse and taking the IP out of reset.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/6a5e4e25d84d6abc971f1669739aae4d3146700f.1779518171.git.radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new debugfs file which displays the number of exceptions (program
checks) per CPU. This is helpful for debugging purposes.
The statistics are typically available at
/sys/kernel/debug/s390/exceptions.
[ hca@linux.ibm.com: Forward ported code, changed file location ]
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Enable cpuidle infrastructure, idle governor and s390 cpuidle driver by
default. They can be disabled via config options before compile or via
setting cpuidle.off kernel commandline option. When cpuidle.off=1 set,
given architecture's specific implementation is used as a fallback without
any governor or idle state support.
During runtime individual states of cpuidle driver can also be disabled
via sysfs attributes:
echo 1 > /sys/devices/system/cpu<N>/cpuidle/state<M>/disable
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Introduce generic cpuidle driver on s390. Use a two stage approach to
handle idle scenarios and use idle governor for idle stage selection.
Two stages are, from shallow to deep, idle polling and enabled wait.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Enable TIF_POLLING_NRFLAG to support idle polling state in the
upcoming cpuidle driver.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove unused arch_needs_cpu() hook. No architectures use it after
s390 removed its use case.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
hugetlb code is known to view all pagetable entries as PTEs, instead of
corresponding upper levels like PMD or PUD. For s390, with different
pagetable entry layout for different levels, this requires some
conversion action under the hood.
The converted PMD and PUD entries are then written via set_pte()
function, but that might add some PTE-specific modifications.
There is no functional problem with current code, and the clearing of
_PAGE_UNUSED in set_pte(). Avoid future problems by using the set_pmd()
and set_pud() functions instead.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Bastian Blank <waldi@debian.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The files has no real user because CEX2 and CEX3 device drivers
are removed, also remove these empty files.
Fixes: 5ac8c72462 ("s390/zcrypt: remove CEX2 and CEX3 device drivers")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 86f48f922b ("s390/mmap: disable mmap alignment when
randomize_va_space = 0") introduced get_align_mask() with return type of
'int', while the target field 'info.align_mask' in struct
vm_unmapped_area_info is 'unsigned long'.
With currently used masks, this should not cause truncation issues, but
fix it and return 'unsigned long' to avoid future problems.
Fixes: 86f48f922b ("s390/mmap: disable mmap alignment when randomize_va_space = 0")
Cc: stable@vger.kernel.org # v6.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
'level' is user space controlled and used to read from an array. Add the
missing array_index_nospec() call to prevent speculative execution.
Cc: stable@vger.kernel.org
Fixes: 0d30871739 ("s390/diag: Add memory topology information via diag310")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
`iio_event_getfd()` creates the event file descriptor with
`anon_inode_getfd()`, which allocates a new fd, creates the anonymous
file and installs it in the process fd table before returning to the
caller.
The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,
but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.
But since fd tables are shared between threads, another thread can guess
the newly allocated fd number and issue a `read()` on it as soon as the fd
has been installed.
This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in
parallel with the `kfifo_reset_out()` in `iio_event_getfd()`.
The kfifo documentation says that `kfifo_reset_out()` is only safe when it
is called from the reader thread and there is only one concurrent reader.
Otherwise it is dangerous and must be handled in the same way as
`kfifo_reset()`.
If that happens, `kfifo_to_user()` can advance the FIFO `out` index based
on state from before the reset, after the reset has already moved the `out`
index to the current `in` index. That can leave the FIFO with an `out`
index past the `in` index. A later `read()` can then see an underflowed
FIFO length and copy more data than the event FIFO buffer contains. This
can result in an out-of-bounds read and leak adjacent kernel memory to
userspace.
Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is
marked busy, but the new fd has not been installed yet, so userspace cannot
access it while the FIFO is reset.
Fixes: b91accafbb ("iio:event: Fix and cleanup locking")
Reported-by: Codex:gpt-5.5
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20EC9664-054E-438B-B411-2145D347F97B@gmail.com/
Tested-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/bb5b1dc6-eb59-43e1-8d26-51e658e88bbe@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Wang <is0124@gmail.com> says:
Add missing groups and functions in Tigerlake's pinctrl driver for INTC1055.
Add support "UP Xtreme i12" board.
The pinctrl-upboard is provide additional driving power & pin mux function
through native SOC pins->FPGA/CPLD->hat pins for flexable board level
applications. it's probe from ACPI device id AANT0F01 & AANT0F04.
Link: https://patch.msgid.link/20260706-upboard-pinctrl-add-upboard-intc1055-support-v4-0-cedce0802d3d@gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support "UP Xtreme i12" and I2C/PWM/UART/SPI pins mapping data.
Signed-off-by: Gary Wang <is0124@gmail.com>
Reviewed-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add i2c0, i2c1, pwm0, uart1, ssp2 pin groups & functions in tgllp_soc_data
for device id INTC1055. The pinctrl-upboard driver set the correct pin
function corresponding to these data.
Signed-off-by: Gary Wang <is0124@gmail.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
clk_get_rate() can return 0 when the clock provider is not properly
configured or the clock is unmanaged. The driver uses wdt_freq as a
divisor directly in airoha_wdt_probe() to compute max_timeout and in
airoha_wdt_get_timeleft() to compute the remaining time, which results
in a division by zero.
Add a check for wdt_freq == 0 in probe and return -EINVAL with
dev_err_probe() to prevent the division by zero and provide a
diagnostic message.
Fixes: 3cf67f3769 ("watchdog: Add support for Airoha EN7851 watchdog")
Signed-off-by: Wayen Yan <win847@gmail.com>
Link: https://lore.kernel.org/r/178347932594.81327.4834644880399144119@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When a watchdog governor is unregistered, it updates existing watchdog
devices that were using this governor by falling back to `default_gov`.
If the governor being unregistered is currently set as `default_gov`,
the `default_gov` is never cleared. This leads to 2 use-after-free
issues:
1. New watchdog devices registered after this point will inherit the
dangling `default_gov`.
2. Existing watchdog devices using the unregistered governor will have
their `wdd->gov` reassigned to the dangling `default_gov`.
Fix the UAF by clearing `default_gov` if it matches the governor being
unregistered.
Fixes: da0d12ff2b ("watchdog: pretimeout: add panic pretimeout governor")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260707101803.3598173-1-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers.
Fixes: f2edb9f770 ("ipvs: implement passive PMTUD for IPIP packets")
Link: https://sashiko.dev/#/patchset/20260702073430.67680-1-zhaoyz24%40mails.tsinghua.edu.cn
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset.
Fixes: 2906f66a56 ("ipvs: SCTP Trasport Loadbalancing Support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20260705123040.35755-1-zhaoyz24@mails.tsinghua.edu.cn/
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
TCP state handling reparses the skb to find the TCP header. For IPv6 it
uses sizeof(struct ipv6hdr), while the surrounding IPVS code already
parsed the packet with ip_vs_fill_iph_skb() and has the real
transport-header offset in iph.len.
This makes TCP state handling look at the wrong bytes when an IPv6
packet carries extension headers. Use the parsed transport offset passed
down from ip_vs_set_state() when reading the TCP header.
For IPv4 and for IPv6 packets without extension headers, the passed
offset matches the previous value.
Fixes: 0bbdd42b7e ("IPVS: Extend protocol DNAT/SNAT and state handlers")
Link: https://lore.kernel.org/netdev/20260705125659.37744-1-zhaoyz24@mails.tsinghua.edu.cn/
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set.
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Cc: stable@vger.kernel.org
Acked-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>.
Fixes: d30301ba4b ("netfilter: flowtable: Add IPIP tx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Reported-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.
Fixes: d98103575d ("netfilter: flowtable: Add IP6IP6 rx sw acceleration")
Fixes: ab427db178 ("netfilter: flowtable: Add IPIP rx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
When pushing the IPIP header, the route of the other direction is used
to calculate the headroom, use the route in this direction. Accessing
the other tuple to set the IP source and destination is fine because
this tuple does not provide such information to avoid storing redundant
information. However, this tuple already provides the dst for this
direction, this went unnoticed because this bug affects headroom and
iph->frag_off only at this stage.
Fixes: d30301ba4b ("netfilter: flowtable: Add IPIP tx sw acceleration")
Fixes: 93cf357fa7 ("netfilter: flowtable: Add IP6IP6 tx sw acceleration")
Cc: stable@vger.kernel.org
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Because a single create function is emitted for every hash type,
from the IPv4 and IPv6 generic hash structure definitions the last
one, i.e. the IPv6 was in effect for IPv4 too. Use the proper size
when allocating the structure. Comment properly that because create()
refers to elements of the generic hash structure, all referred ones
must come before the IPv4/IPv6 dependent 'next' member.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Sashiko pointed out that the add/del backlog was not cleaned up
when resize failed. Fix it in the corresponding error path. Also,
make sure that the add/del backlog is htable-specific so when
resize creates a new htable, old/new backlog can't be mixed up.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
