Add snd_soc_acpi_amd_acp7x_sof_machines[] ACPI machine table for ACP7.B
and ACP7.F PCI revision based platforms. Add the extern declaration to
mach-config.h so that it can be referenced from the SOF PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260701095759.1012929-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few of the ROHM PMICs have a state-machine corrsponding to the SOC
power-states. Idea is that by changing the PMIC state, all power-outputs
will be switched to a pre-defined state. As an example, the SOC may use
a low-power state when system is suspended, and when transitioning from
the normal operation to suspend, the PMIC can be told to go to
SUSPEND-state - which will then switch outputs of all power-rails to
pre-defined low-power state matching the SOC expectation for SUSPEND.
In addition to the SUSPEND, there are a few other states as well.
The voltage values & enable / disable -states matching the SOC
expectations can be set for the PMIC states using
rohm,dvs-<state>-voltage -properties. It all started with the BD71837
supporting this, but over the years these same properties have been used
for a few other PMICs, and seems like this HW-state machine design is not
going away.
Copying the descriptions and types in each PMIC specific binding, and
discussing them during the reviews is getting tedious for the reviewers
and author(s) alike. Furthermore, having separate descriptions makes it
very easy to add errors, or differing, and even contradicting
documentation for properties with same name.
Avoid these issues by using one common file for the common ROHM PMIC
state-machine definitions and only referencing this from the individual
PMIC bindings.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/akZGe1CaQFDd3idm@mva-rohm
Signed-off-by: Mark Brown <broonie@kernel.org>
Please consider pulling these changes from the signed vfs-7.2-rc2.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCakeSGAAKCRCRxhvAZXjc
opdAAQDCui7Q517Wxe59USK+wtnOVARMzCN0Tu6e/HodvbbIEAD/RmgGnQrYF13I
3BuCwTMS9Q1lHQLUtIkd9WqqYa2rQws=
=uL08
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- netfs:
- fix the decision when to disallow write-streaming with fscache in
use, handling of asynchronous cache object creation, a double fput
in cachefiles, clearing S_KERNEL_FILE without the inode lock held,
page extraction bugs in the iov_iter helpers (a potential
underflow, a missing allocation failure check, a memory leak, and
a folio offset miscalculation), writeback error and ENOMEM
handling, DIO write retry for filesystems without a
->prepare_write() method, and the replacement of the wb_lock mutex
with a bit lock plus writethrough collection offload so that
multiple asynchronous writebacks don't interfere with each other.
- Fix the barriering when walking the netfs subrequest list during
retries as it was possible to see a subrequest that was just added
by the application thread.
- iomap:
- Change iomap to submit read bios after each extent instead of
building them up across extents. The old behavior was considered
problematic for a while and now caused an actual erofs bug.
- Guard the ioend io_size EOF trim in iomap against underflow when a
concurrent truncate moves EOF below the start of the ioend,
wrapping io_size to a huge value.
- overlayfs
- Fix a stale overlayfs comment about the locking order.
- Store the linked-in upper dentry instead of the disconnected
O_TMPFILE dentry during overlayfs tmpfile copy-up. With a FUSE or
virtiofs upper layer ->d_revalidate() would try to look up "/" in
the workdir and fail, causing persistent ESTALE errors that broke
dpkg and apt.
- vfs-bpf:
Have the bpf_real_data_inode() kfunc take a struct file instead of a
dentry so it is usable from the bprm_check_security, mmap_file, and
file_mprotect hooks, and rename it from bpf_real_inode() to make the
data-inode semantics explicit. The kfunc landed this cycle so the
change is safe.
- afs:
NULL pointer dereferences in the callback service and in
afs_get_tree(), several memory and refcount leaks, missing locking
around the dynamic root inode numbers and premature cell exposure
through /afs, a netns destruction hang caused by a misplaced
increment of net->cells_outstanding, a bulk lookup malfunction caused
by the dir_emit() API change, inode (re)initialisation issues, and
assorted smaller fixes to error codes, seqlock handling, and debug
output.
- vfs:
Refuse O_TMPFILE creation with an unmapped fsuid or fsgid and add a
selftest for it.
- vboxsf:
Add Jori Koolstra as vboxsf maintainer, taking over from Hans de
Goede.
- dio:
Release the pages attached to a short atomic dio bio; the REQ_ATOMIC
size check error path leaked them.
- procfs:
Only bump the parent directory link count when registering
directories in procfs. Registering regular files inflated the count
and leaked a link on every create and remove cycle.
- minix:
Avoid an unsigned overflow in the minix bitmap block count
calculation that let crafted images with huge inode or zone counts
pass superblock validation and crash the kernel during mount.
- cachefiles:
Fix a double unlock in the cachefiles nomem_d_alloc error path left
over from the start_creating() conversion.
- fat:
Stop fat from reading directory entries past the 0x00
end-of-directory marker. If the trailing on-disk slots aren't
zero-filled the driver surfaced arbitrary garbage as directory
entries.
- freexvfs:
Don't BUG() on unknown typed-extent types in freevxfs, reachable via
ioctl(FIBMAP) on a crafted image; fail with an I/O error instead.
- orangefs:
Keep the readdir entry size 64-bit in orangefs fill_from_part().
Truncating it to __u32 bypassed the bounds check and led to
out-of-bounds reads triggerable by the userspace client.
- xfs:
Fix the error unwind in xfs_open_devices() which released the rt
device file twice and left dangling buftarg pointers behind that were
freed again when the failed mount was torn down.
- exec:
Fix an off-by-one in the comment documenting the maximum binfmt
rewrite depth in exec_binprm(). The code allows five rewrites, not
four; restricting the code would break userspace so the comment is
fixed instead.
- file handles:
Reject detached mounts in capable_wrt_mount(). A detached mount can
be dissolved concurrently, leaving a NULL mount namespace that
open_by_handle_at() would dereference.
* tag 'vfs-7.2-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (57 commits)
netfs: Fix barriering when walking subrequest list
iomap: submit read bio after each extent
fuse: call fuse_send_readpages explicitly from fuse_readahead
iomap: consolidate bio submission
fhandle: reject detached mounts in capable_wrt_mount()
netfs: Fix DIO write retry for filesystems without a ->prepare_write()
netfs: Fix folio state after ENOMEM whilst under writeback iteration
netfs: Fix writeback error handling
netfs: Fix writethrough to use collection offload
netfs: Replace wb_lock with a bit lock for asynchronicity
netfs: Fix kdoc warning
scatterlist: Fix offset in folio calc in extract_xarray_to_sg()
iov_iter: Remove unused variable in kunit_iov_iter.c
iov_iter: Fix a memory leak in iov_iter_extract_user_pages()
iov_iter: Fix missing alloc fail check in iov_iter_extract_bvec_pages()
iov_iter: Fix potential underflow in iov_iter_extract_xarray_pages()
cachefiles: Fix file burial to take lock when unsetting S_KERNEL_FILE
cachefiles: Fix double fput
netfs: Fix netfs_create_write_req() to handle async cache object creation
netfs: Fix decision whether to disallow write-streaming due to fscache use
...
It sets soc_card_data (1) in Card private data at (A), but the function (z)
after that gets it as priv (2) at (B). These are different data (*).
(z) static int mt8365_mt6357_gpio_probe(...)
{
(B) struct mt8365_mt6357_priv *priv = snd_soc_card_get_drvdata(card);
... ^^^^(2) ^^^^^^^^^^^
}
static int mt8365_mt6357_dev_probe(*soc_card_data, ...)
{ ^^^^^^^^^^^^^(1)
...
struct mt8365_mt6357_priv *mach_priv;
... ^^^^^^^^^(2)
(*) soc_card_data->mach_priv = mach_priv;
^^^^^^^^^^^^^(1) ^^^^^^^^^(2)
(A) snd_soc_card_set_drvdata(card, soc_card_data);
^^^^^^^^^^^ ^^^^^^^^^^^^^(1)
(z) mt8365_mt6357_gpio_probe(card);
...
}
Depending on the defined order in the struct (s), they may be the same
pointer, but mach_priv (2) is not top of soc_card_data (1), thus the
function (z) is getting wrong pointer. Fix it.
(1)
(s) struct mtk_soc_card_data {
const struct mtk_sof_priv *sof_priv;
...
void *mach_priv;
}; (2)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzlteuae.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCakeeeQAKCRBcsMJ8RxYu
Y6Q+AX9gnOQ1ZkxIKb+/hHq061nh/41iOaiO1CHEgvkCuX2pkRDJkIO2g5+1WaCC
FcjSzLcBf0COW1/Pye2+ViB1u/SkMJZpKbrKl6lY4wcVHtqNSwn/D0zvbXsfBSsb
Zj6I2kGZGw==
=FpZC
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.2-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A collection of bugfixes and some small code refactoring"
* tag 'xfs-fixes-7.2-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: simplify __xfs_buf_ioend
xfs: fix handling of synchronous errors in xfs_buf_submit
xfs: remove xfs_buf_ioend
xfs: improve the xfs_buf_ioend_fail calling convention
xfs: use null daddr for unset first bad log block
xfs: fix memory leak in xfs_dqinode_metadir_create()
xfs: release dquot buffer after dqflush failure
xfs: also mark the buffer stale on verifier failure in xfs_buf_submit
xfs: open code xfs_buf_ioend_fail in xfs_buf_submit
xfs: fix AGFL extent count calculation in xrep_agfl_fill
xfs: simplify the failure path in xfs_buf_alloc_vmalloc
xfs: fix incorrect use of gfp flags in xfs_buf_alloc_backing_mem
xfs: lift setting __GFP_NOFAIL from xfs_buf_alloc_kmem to the caller
xfs: split up xfs_buf_alloc_backing_mem
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCakeC1xsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQgFxhu0/YY74ZBQD/chB7mZrRK5FWdhtEYZuT
5is9FKdEe7P3rRChGuDxGZoBAISClrfxdh46C90D8jhjE3G3xWsN5DIajo1YaDbH
TroI
=wiih
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.2a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- rename function parameters and a comment related to
xen_exchange_memory() (Jan Beulich)
- replace __ASSEMBLY__ with __ASSEMBLER__ (Thomas Huth)
- add some sanity checking to the Xen pvcalls frontend driver (Michael
Bommarito)
- fix error handling in the Xen gntdev driver (Wentao Liang)
- fix several minor bugs in Xen related drivers (Yousef Alhouseen)
* tag 'for-linus-7.2a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: correct commentary and parameter naming of xen_exchange_memory()
xenbus: reject unterminated directory replies
xen/gntalloc: validate grant count before allocation
xen/gntalloc: make grant counters unsigned
xen/front-pgdir-shbuf: free grant reference head on errors
xen/gntdev: fix error handling in ioctl
xen: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files
xen/pvcalls: bound backend response req_id before indexing rsp[]
- check the return value of gpiochip_add_data() in gpio-mvebu and
gpio-htc-egpio
- avoid locking context issues with GPIO drivers using the shared GPIO
proxy by only allowing sleeping operations (atomic GPIO ops don't
really make sense in shared context anyway)
- with the above: restoe non-sleeping GPIO access in pinctrl-meson
- fix return value on OOM in gpio-timberdale
- fix interrupt handling in gpio-mt7621
- support both A and B variants of NCT6126D in gpio-f7188x
-----BEGIN PGP SIGNATURE-----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=Q09c
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- check the return value of gpiochip_add_data() in gpio-mvebu and
gpio-htc-egpio
- avoid locking context issues with GPIO drivers using the shared GPIO
proxy by only allowing sleeping operations (atomic GPIO ops don't
really make sense in shared context anyway)
- with the above: restore non-sleeping GPIO access in pinctrl-meson
- fix return value on OOM in gpio-timberdale
- fix interrupt handling in gpio-mt7621
- support both A and B variants of NCT6126D in gpio-f7188x
* tag 'gpio-fixes-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
pinctrl: meson: restore non-sleeping GPIO access
gpio: timberdale: Return -ENOMEM on dynamic memory allocation in probe
gpio: mt7621: be sure IRQ domain is created before exposing GPIO chips
gpio: mt7621: more robust management of IRQ domain teardown
gpio: mt7621: avoid corruption of shared interrupt trigger state
gpio: shared-proxy: always serialize with a sleeping mutex
gpio-f7188x: Add support for NCT6126D version B
gpio: htc-egpio: use managed gpiochip registration
gpio: mvebu: fail probe if gpiochip registration fails
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpH1IMACgkQJNaLcl1U
h9BbqQf+Kbxx8fZTq9/B2We7wNK70hyrMB1hsnyKRGSgJXBEr+V/k5C5iG+vzFjB
syZLwk+Ghkk+FvtQbZsBrtkbY0kPyUz0xff+X6VyJO5ylFQs27RijTPwI1MheU+o
baSOhwRaAs8FFJdBEdC611STaxYVuJKc2Z+fKPQGp54VpD0anXjgTFTe0SP6IrnT
H7HtbQUIP3ZTtCLH2/Fq9ZZfeCmpOkeuvr5iMv/KrSI5uv6AkB8eCoTt1gnTSnNh
3XDkTlhT2EnoEEc2TCFi392rUcu+sv5sbld6PwaXlhJryLYz+95IXEWFYYwDL64c
3t0ElJvBRZIoOc9Ry589ElXxPbEQFQ==
=d+FT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpH1RQACgkQJNaLcl1U
h9AUJgf/SMsHAhkFaMozi5V6fSGjc5SjLfQPSEyX6gQOrLhQ8VKCHlstsZjEamp9
H0c/EF+4EMvQMO8FIDVSw/Na3fMuzrTDGJif6v2JQnNejT87tDG/GDH+3CRdLgYE
zCPbpjr6rIV85zjnC3yJ4ebybWNPZJ/IV+wpKhaNxU9/x1fVLE+z0TluYrpRNZrq
/uclUTV42OS7a0+oHq8n0Ysd1wALb5/aP6EQGZ/GTeLOPmIy2Qi93JcVkae7yzIL
cRrT3MD6iLiDSSp+nS4bVTiH6OHNfKSU79axxECxaKciYuAtuqgJi+/094qffdCe
7lcM6gtkLkIBvA2ZEcL1dFASBMFSVw==
=YuSX
-----END PGP SIGNATURE-----
regmap-irq: Provide IRQ resource request and release callbacks
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260702130903.1790633-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fanotify permission events are allocated with kmem_cache_alloc(), but
fanotify_alloc_perm_event() does not initialize watchdog_cnt.
The watchdog reads watchdog_cnt after the event is moved to access_list.
A stale value can make it warn too early or skip the warning.
Initialize watchdog_cnt when allocating a permission event.
Fixes: b8cf8fda52 ("fanotify: add watchdog for permission events")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260703031345.9354-1-xuanqiang.luo@linux.dev
Signed-off-by: Jan Kara <jack@suse.cz>
Andrii reported an issue with optimized uprobes [1] that can clobber
redzone area with call instruction storing return address on stack
where user code may keep temporary data without adjusting rsp.
Fixing this by moving the optimized uprobes on top of 10-bytes nop
instruction, so we can squeeze another instruction to escape the
redzone area before doing the call, like:
lea -0x80(%rsp), %rsp
call tramp
Note the lea instruction is used to adjust the rsp register without
changing the flags.
We use nop10 and following transformation to optimized instructions
above and back as suggested by Peterz [2].
Optimize path (int3_update_optimize):
1) Initial state after set_swbp() installed the uprobe:
cc 2e 0f 1f 84 00 00 00 00 00
From offset 0 this is INT3 followed by the tail of the original
10-byte NOP.
After a previous unoptimization bytes 5..9 may still contain the
old call instruction, which remains valid for threads already there.
2) Rewrite the LEA tail and call displacement:
cc [8d 64 24 80 e8 d0 d1 d2 d3]
From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not
executable entry points while byte 0 is trapped.
3) Publish the first LEA byte:
[48] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this is:
lea -0x80(%rsp), %rsp
call <uprobe-trampoline>
Unoptimize path (int3_update_unoptimize):
1) Initial optimized state:
48 8d 64 24 80 e8 d0 d1 d2 d3
Same as 3) above.
2) Trap new entries before restoring the NOP bytes:
[cc] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this traps. A thread that had already executed the
LEA can still reach the intact CALL at offset 5.
3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped
and byte 5 as CALL.
cc [2e 0f 1f 84] e8 d0 d1 d2 d3
From offset 0 this still traps. Offset 5 is still the CALL for any
thread that was already past the first LEA byte.
4) Publish the first byte of the original NOP:
[66] 2e 0f 1f 84 e8 d0 d1 d2 d3
From offset 0 this is the restored 10-byte NOP; the CALL opcode and
displacement are now only NOP operands. Offset 5 still decodes as
CALL for a thread that was already there.
Tthere is only a single target uprobe-trampoline for the given nop10
instruction address, so the CALL instruction will not be changed across
unoptimization/optimization cycles.
Therefore, any task that is preempted at the CALL instruction is guaranteed
to observe that CALL and not anything else.
Note as explained in [2] we need to use following nop10:
PF1 PF2 ESC NOPL MOD SIB DISP32
NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1)
which means we need to allow 0x2e prefix which maps to INAT_PFX_CS
attribute in is_prefix_bad function.
Also changing the uprobe syscall error when called out of uprobe
trampoline to -EPROTO, so we are able to detect the fixed kernel.
The optimized uprobe performance stays the same:
uprobe-nop : 3.129 ± 0.013M/s
uprobe-push : 3.045 ± 0.006M/s
uprobe-ret : 1.095 ± 0.004M/s
--> uprobe-nop10 : 7.170 ± 0.020M/s
uretprobe-nop : 2.143 ± 0.021M/s
uretprobe-push : 2.090 ± 0.000M/s
uretprobe-ret : 0.942 ± 0.000M/s
--> uretprobe-nop10: 3.381 ± 0.003M/s
usdt-nop : 3.245 ± 0.004M/s
--> usdt-nop10 : 7.256 ± 0.023M/s
[1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/
[2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t
Closes: https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/
Fixes: ba2bfc97b4 ("uprobes/x86: Add support to optimize uprobes")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Assisted-by: Codex:GPT-5.5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/20260703114917.238144-6-jolsa@kernel.org
When we do fork or clone without CLONE_VM the new process won't
have uprobe trampoline vma objects and at the same time it will
have optimized code calling that trampoline and crash.
Fixing this by allowing vma uprobe trampoline objects to be copied
on fork to the new process.
Fixes: ba2bfc97b4 ("uprobes/x86: Add support to optimize uprobes")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/20260703114917.238144-5-jolsa@kernel.org
In case the optimization fails, we leak new-ly created trampoline
vma mapping (in case we just created it), let's unmap it.
Fixes: ba2bfc97b4 ("uprobes/x86: Add support to optimize uprobes")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/20260703114917.238144-4-jolsa@kernel.org
Removing struct uprobe_trampoline object and it's tracking code,
because it's not needed. We can do same thing directly on top of
struct vm_area_struct objects.
This makes the code simpler and allows easy propagation of the
trampoline vma object into child process in following change.
Note the original code called destroy_uprobe_trampoline if the
optimiation failed, but it only freed the struct uprobe_trampoline
object, not the vma. The new vma leak is fixed in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://patch.msgid.link/20260703114917.238144-3-jolsa@kernel.org
Eric Dumazet says:
====================
macvlan: RTNL-less macvlan_fill_info()
This series removes the RTNL lock dependency from macvlan_fill_info(),
allowing it to run under RCU read lock.
The first patch annotates data races on 'mode' and 'flags' fields which
are accessed locklessly in the RX/TX paths.
The second patch transitions macvlan_fill_info() to RCU, adding necessary
annotations for other fields and handling concurrent updates to the MAC
address list by computing the count dynamically.
====================
Link: https://patch.msgid.link/20260701082214.2974946-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add READ_ONCE()/WRITE_ONCE() annotations on vlan->mode, vlan->flags,
vlan->bc_queue_len_req and port->bc_cutoff.
Fill IFLA_MACVLAN_MACADDR_DATA nested attribute and compute
on the fly the precise number of elements we put in it,
to fill an accurate IFLA_MACVLAN_MACADDR_COUNT attribute
as some user space applications could depend on its value
and the attributes order.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701082214.2974946-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both fields can be changed in macvlan_changelink() while being read
locklessly.
Add READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701082214.2974946-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Queue wake, stop, and disable paths walk local->interfaces under RCU.
The bulk hardware teardown path removes entries with list_del(), so an
asynchronous transmit completion can follow a poisoned list node in
ieee802154_wake_queue().
Use list_del_rcu() as in the single-interface removal path. The following
unregister_netdevice() waits for in-flight RCU readers before freeing the
netdevice, so no separate grace-period wait is needed.
Fixes: 592dfbfc72 ("mac820154: move interface unregistration into iface")
Reported-by: syzbot+36256deb69a588e9290e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=36256deb69a588e9290e
Cc: stable@vger.kernel.org
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260701164222.9094-1-alhouseenyousef@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
regcache_sync() can fail while replaying cached register state during
resume. max98390_resume() currently ignores that failure and returns
success.
Propagate the error and restore cache-only/dirty state on failure.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260702072918.85779-1-pengpeng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a followup based on sashiko comments [1] on commit e5b811fe79
("net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF")
Use plain rcu_read_lock()/spin_lock() in teql_master_xmit() instead of the
_bh variants, since ndo_start_xmit is already invoked with BH disabled
by the core stack and the _bh primitives can warn in_hardirq() when xmit
is reached through netpoll or a softirq xmit path with hard IRQs disabled.
Moves rcu_read_lock() after restart: label + adds rcu_read_unlock() before
goto restart (fixes the unbounded RCU hold across retries)
[1] https://sashiko.dev/#/patchset/20260628111229.669751-1-jhs%40mojatatu.com
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: e5b811fe79 ("net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF")
Link: https://patch.msgid.link/20260630150922.238714-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com> says:
This series converts the LPASS WSA and VA macro codec drivers to the
PM clock framework for runtime PM clock handling.
The runtime clock enable/disable sequencing is moved to PM clock helpers
for clocks described in device tree, while regcache state handling remains
in the codec runtime PM callbacks. This keeps register cache synchronization
explicit in the driver and lets runtime PM drop codec clock votes when the
macros are idle.
The series also keeps WSA MCLK-output clock registration resource-managed
by switching it to devm_clk_hw_register(), which allows the empty WSA remove
callback to be dropped.
Link: https://patch.msgid.link/20260702-xo-sd-codec-v7-b4-v8-0-d39d0fdb7859@oss.qualcomm.com
Switch WSA MCLK output registration to devm_clk_hw_register() so the clk
hw is automatically unregistered on probe failure and remove.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702-xo-sd-codec-v7-b4-v8-3-d39d0fdb7859@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the LPASS VA macro codec driver to runtime PM clock management by
using the PM clock framework.
Replace manual macro/dcodec/mclk/npl clock handling with PM clock helpers
and runtime PM callbacks, and keep runtime PM references around fsgen clock
gating so PM-clock-managed clocks remain active while fsgen is enabled.
Set autosuspend delay to 100 ms so PM-clock-managed votes are dropped soon
after idle while still avoiding suspend/resume churn on short gaps.
Add a PM_CLK dependency to SND_SOC_LPASS_VA_MACRO since this patch
introduces PM clock APIs.
Improve failure unwind paths: handle runtime PM put errors in probe/fsgen
paths and restore regcache state correctly on resume failure.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702-xo-sd-codec-v7-b4-v8-2-d39d0fdb7859@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the LPASS WSA macro codec driver to runtime PM clock management by
using the PM clock framework.
Replace manual macro/dcodec/mclk/npl/fsgen clock toggling with PM clock
helpers and runtime PM callbacks. Keep the SWR gate runtime PM reference
from SWR clock enable until disable so autosuspend does not gate clocks
while SWR is still prepared.
Set autosuspend delay to 100 ms so PM-clock-managed votes are dropped soon
after idle while still avoiding suspend/resume churn on short gaps.
Add a PM_CLK dependency to SND_SOC_LPASS_WSA_MACRO since this patch
introduces PM clock APIs.
Tighten error unwind by checking pm_runtime_put_sync_suspend() in probe and
by restoring regcache state if pm_clk_resume()/regcache_sync() fails.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702-xo-sd-codec-v7-b4-v8-1-d39d0fdb7859@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RedBoot FIS partition names are stored in a fixed 16-byte field that is
expected to be NUL-terminated. parse_redboot_partitions() used strlen()
to size the names area and later copied the same field with strcpy(), so
a malformed table entry without a terminator could make both operations
read beyond the descriptor.
Validate each accepted FIS name with strnlen() before adding it to the
partition list.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The comment above makes it clear that this is a single element for
legacy handling. Clarify that with struct_size and avoid manual pointer
math.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The uclinux MTD map driver is still actively used on ColdFire (m68k)
platforms. The ColdFire startup code in arch/m68k/coldfire/head.S copies
an attached filesystem blob to _bss_stop, and the uclinux driver picks
it up from there. Most ColdFire defconfigs enable CONFIG_MTD_UCLINUX, as
the driver seems to serve as a replacement for CONFIG_BLK_DEV_INITRD on
these non-MMU targets.
The driver was removed as part of a series cleaning up AMD Élan specific
drivers, but unlike the other three drivers in that series, this driver
seemed to not be as Élan specific (nor unused) as initially thought.
This reverts commit c584b8a7ad.
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Closes: https://lore.kernel.org/all/b55ac37f-4523-46d0-8e77-3a17d7235ffe@westnet.com.au/
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The S5PC110 OneNAND DMA helpers have bounded waits for transfer
completion. The polling helper falls out of its timeout loop and returns
success, and the IRQ helper ignores wait_for_completion_timeout().
Return -ETIMEDOUT when the DMA transfer-done bit or completion does not
arrive before the timeout so callers can treat the buffer transfer as
failed.
Fixes: e23abf4b77 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
fsl_ifc_run_command() logs controller timeout and other non-OPC
completion states in ctrl->nand_stat. fsl_ifc_read_page() then only
increments the ECC failure counter for non-OPC status and still returns
max_bitflips, which can be zero.
Return -ETIMEDOUT when the command did not complete at all and -EIO for
other non-OPC read completions so the NAND core does not treat a failed
page read as a clean page.
Fixes: 82771882d9 ("NAND Machine support for Integrated Flash Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The driver stores chip capacity information in both the OF match table
and the SPI id table. Probe currently uses of_device_get_match_data(),
so a non-OF SPI modalias match falls back to mchp23k256_caps even when
the SPI id table selected a different part.
Use spi_get_device_match_data() so SPI id-table driver_data is consumed
when OF match data is absent. This keeps the existing default fallback
while avoiding the wrong MTD geometry for id-table-only matches.
Fixes: 4379075a87 ("mtd: mchp23k256: Add support for mchp23lcv1024")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
lpc32xx_xmit_dma() waits for the DMA completion callback but ignores
wait_for_completion_timeout(). A timed out DMA transfer is therefore
unmapped and reported as successful to the NAND read/write path.
Return -ETIMEDOUT when the completion wait expires. Terminate the DMA
channel before unmapping the scatterlist so the timed out transfer cannot
continue to access the buffer after the error is returned.
Fixes: 2944a44da0 ("mtd: add LPC32xx SLC NAND driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
lpc32xx_xmit_dma() starts a DMA transfer and waits up to one second
for its completion, but it ignores the wait result and returns success
after unmapping the buffer.
A timed out read can therefore return success with incomplete data, and
a timed out write can continue the NAND operation without proof that the
DMA payload reached the controller.
Terminate the DMA channel on timeout, unmap the scatterlist through the
existing cleanup path, and return -ETIMEDOUT to the NAND read/write
callers. Initialize the shared cleanup-path result before using it for
dmaengine_prep_slave_sg() failures.
Fixes: 70f7cb78ec ("mtd: add LPC32xx MLC NAND driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case.
Reported-by: syzbot+e9c76b56dc05023b8117@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e9c76b56dc05023b8117
Fixes: 19bfa9ebeb ("mtd: use refcount to prevent corruption")
Signed-off-by: Xue Lei <Xue.Lei@windriver.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Every MTD registration runs mtd_virt_concat_create_join(). Once a
virtual concat has already been registered, the function builds the same
name again and takes the equal-name branch. That branch skips to the
next item without freeing the newly allocated string.
Free the temporary name before continuing.
Fixes: 43db6366fc ("mtd: Add driver for concatenating devices")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The driver registers two distinct WMI devices: a control device
(BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During
the probe phase, the event device handling path returns early before
initializing the platform profile device (data->pp_dev), leaving it
NULL.
However, the PM sleep operations are registered globally for the WMI
driver and are triggered for both devices. When entering suspend, the
event device invokes bitland_mifs_wmi_suspend(), which passes the
uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads
to a NULL pointer dereference inside dev_get_drvdata(), causing a
kernel Oops and halting the suspend sequence.
Fix this by adding a validity check for data->pp_dev in both the suspend
and resume callbacks, safely skipping profile operations for the event
device.
Fixes: dc1ec4fa86 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver")
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mingyou Chen <qby140326@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260701120140.430659-1-qby140326@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
dmi_get_system_info(...) can return NULL. Using that as %s arguments
of dev_info() would log "(null)" (as part of a message like
'... System Vendor: "(null)", Product Name: "(null)" ...'), which may
be confusing for users.
Use Elvis operator to print "(Unknown)" instead.
Fixes: 428b9fd2dc ("platform/x86/amd/pmc: Add delay_suspend module parameter")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606251540.Nr2BtaNu-lkp@intel.com/
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Link: https://patch.msgid.link/20260626220210.1761783-2-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
lookup_bdev() blindly returns inode->i_rdev without validating it.
When a FUSE filesystem exposes a root inode with S_IFBLK mode but
i_rdev == 0 (via rootmode=060000), any subsequent mount attempt using
that path as a block device source propagates dev_t 0 into the
superblock machinery. After commit 9ee5f161a4 ("fs: maintain a
global device-to-superblock table") this triggers a WARNING in
super_dev_register().
Reject i_rdev == 0 early with -ENODEV since no real block device
driver registers major 0.
Reported-by: syzbot+72fe3ea5814121fbc76e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72fe3ea5814121fbc76e
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://patch.msgid.link/20260703065548.1135125-1-yun.zhou@windriver.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Switch the iis clock error path to dev_err_probe(). This folds the
dev_err() and return into a single statement and, when devm_clk_get()
returns -EPROBE_DEFER, avoids logging a spurious error on every probe
retry while still recording the reason in the deferred-probe debugfs.
No functional change other than the demoted log level on deferred
probe; the returned error code is unchanged.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260701084336.308886-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path.
Fixes: 472a73e007 ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Reviewed-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 9a05475ceb ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later.
Fixes: 9a05475ceb ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
When an ICMP Fragmentation Needed error is received for a tunneled IPVS
connection, ip_vs_in_icmp() recomputes the MTU that the original packet
can use by subtracting the tunnel overhead from the reported next-hop
MTU.
The current code always subtracts sizeof(struct iphdr), which is only
the IPIP overhead. For GUE and GRE tunnels, ipvs_udp_decap() and
ipvs_gre_decap() already compute the additional tunnel header length,
but that value is scoped to the decapsulation block and is lost before
the ICMP_FRAG_NEEDED handling. As a result, the ICMP error sent back to
the client advertises an MTU that is too large, so PMTUD can fail to
converge for GUE/GRE-tunneled real servers.
With a reported next-hop MTU of 1400, a GUE tunnel currently returns
1380 to the client. The correct value is 1368:
1400 - sizeof(struct iphdr) - sizeof(struct udphdr) -
sizeof(struct guehdr)
Hoist the tunnel header length into the main ip_vs_in_icmp() scope and
subtract sizeof(struct iphdr) + ulen in the Fragmentation Needed path.
The IPIP path keeps ulen as 0, so its existing 1400 - 20 = 1380 result
is unchanged.
Fixes: 508f744c0d ("ipvs: strip udp tunnel headers from icmp errors")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
The get command on intervals provide partial matches such as subranges
for usability reasons. However, an open interval has no closing end
element. If the closing element matches within the range of the open
internal, ie. its closest match is the start element of the open range,
then, return 0 but offer no matching element to userspace through
netlink as a special case. Userspace provides at least a matching start
element in this case and the closing end element matching the open
interal is ignored.
Another possibility is to report the matching start element of the open
interval for this end interval. However, this results in duplicated
matching being listed in userspace because userspace does not expect a
start element as response to a end element.
Fixes: 2aa34191f0 ("netfilter: nft_set_rbtree: use binary search array in get command")
Reported-by: Melbin K Mathew <mlbnkm1@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhixing Chen <running910@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Really cap it to NF_CT_EXPECT_MAX_CNT (255) on updates.
The commit ("netfilter: nfnetlink_cthelper: cap to maximum number of
expectation per master") only covers creation of helpers, not updates.
Fixes: 397c830097 ("netfilter: nf_conntrack_helper: cap maximum number of expectation at helper registration")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Fix by changing the local variables to u64.
Fixes: 1c0d32fde5 ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Feng Wu <wufengwufengwufeng@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path.
Fixes: 1b50b8a371 ("[NETFILTER]: Add u32 match")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
quoting sashiko:
------------------------------------------------------------------------
[..] noticed a potential memory bug and header corruption involving the
SIP NAT helper.
In net/netfilter/nf_nat_sip.c:nf_nat_sip():
if (skb_ensure_writable(skb, skb->len)) {
nf_ct_helper_log(skb, ct, "cannot mangle packet");
return NF_DROP;
}
uh = (void *)skb->data + protoff;
uh->dest = ct_sip_info->forced_dport;
if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff,
0, 0, NULL, 0)) {
If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the
old data buffer is freed. However, nf_nat_sip() fails to update *dptr to
point to the new buffer.
It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP
packet, which would overwrite the sequence number with a checksum update.
------------------------------------------------------------------------
nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen.
But clones are possible, so rebuild dptr.
Disable nf_nat_mangle_udp_packet() branch for TCP streams.
It doesn't look like this can ever happen, else we should have received
bug reports about this, so just check the conntrack is UDP and drop
otherwise.
The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages,
so I don't think this is ever expected to be true for a TCP stream.
Fixes: 7266507d89 ("netfilter: nf_ct_sip: support Cisco 7941/7945 IP phones")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
The loop in intel_dp_check_mst_status() keeps servicing interrupts
originating from the sink without bound. Add an upper bound to the new
interrupts occurring during interrupt processing to not get stuck on
potentially stuck sink devices. Use arbitrary 32 tries to clear incoming
interrupts in one go.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Note: The condition likely pre-dates the commit in the Fixes: tag, but
this is about as far back as a backport has any chance of
succeeding. Before that, the retry had a goto.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 3c0ec2c2d5 ("drm/i915: Flatten intel_dp_check_mst_status() a bit")
Cc: stable@vger.kernel.org # v5.8+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260625142204.1078287-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
I will post DAI/Component/Card capsuling patch, but
current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Link: https://patch.msgid.link/87ik6zcu7g.wl-kuninori.morimoto.gx@renesas.com
