sensor_hub_input_attr_get_raw_value() is limited to returning a single
32-bit value, which is insufficient for sensors that report data larger
than 32 bits, such as a quaternion with four s16 elements.
Add sensor_hub_input_attr_read_values() that accepts a caller-provided
buffer and accumulates incoming data until the buffer is full. The two
paths are distinguished in sensor_hub_raw_event() by pending.max_raw_size
being non-zero, preserving backward compatibility.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Co-developed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().
Fixes: b586e5d9ee ("staging:iio:adc:spear rename device specific state structure to _state")
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the report from Jaeyoung Chung:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
lpc32xx_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().
Fixes: 7901b2a145 ("staging:iio:adc:lpc32xx rename local state structure to _state")
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path.
Fixes: f6dbf83c17 ("iio: light: gp2ap002: Take runtime PM reference on light read")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced.
Fixes: 0c3a333524 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early.
Fixes: 9a9a369d61 ("iio: accel: kxsd9: Deploy system and runtime PM")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.
Fixes: 3bbec97733 ("iio: bmc150_accel: add support for hardware fifo")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ensure that if a device has Vref1 but reading the regulator returns an
error, mcp47feb02_init_ctrl_regs() is not called with an uninitialized
vref1_uV value. Also add a device_property_present() check for the Vref1
supply before reading the regulator.
Fixes: dd154646d2 ("iio: dac: mcp47feb02: Fix Vref validation [1-999] case")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/adiPnla0M5EzvgD-@stanley.mountain/
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD7380 driver uses generic regmap types and APIs. However, its
Kconfig entry does not select REGMAP.
As a result, AD7380 can be enabled from an allnoconfig-derived config
with SPI_MASTER=y while REGMAP remains unset, causing ad7380.o to fail
to build.
Fixes: b095217c10 ("iio: adc: ad7380: new driver for AD7380 ADCs")
Signed-off-by: Samuel Moelius <samuel.moelius@trailofbits.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
i.MX21 (and thus imx21_init_early()) is gone since v5.10-rc1 (commit
4b563a0666 ("ARM: imx: Remove imx21 support")).
The init_irq() functions are gone since v5.12-rc5 (commit e2c1b0ff38
("ARM: imx: avic: Convert to using IRQCHIP_DECLARE")).
And mxc_device_init() was removed for v5.10-rc1 (in commit 8485adf17a
("ARM: imx: Remove imx device directory")).
The last user of imx1_reset_init() is gone since v4.9-rc1 (commit
e1291cffcc ("ARM: i.MX: Remove i.MX1 non-DT support")).
Drop declaration of enum mxc_cpu_pwr_mode, the actual definition follows
later in common.h without a usage in-between.
All users of of_device_id also include <linux/of.h>,
<linux/of_address.h> or <linux/of_platform.h> which is enough to not
need the forward declaration.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
Fixes: 0e1a47fcab ("drm/xe: Add a helper for DRM device-lifetime BO create")
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Zongyao Bai <zongyao.bai@intel.com>
Link: https://patch.msgid.link/20260626210631.3887291-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Currently, copy_process() can bail out to free_task() before p->bpf_storage
has been initialized, with this call graph (shown here for the
!CONFIG_MEMCG case):
copy_process
dup_task_struct
arch_dup_task_struct
[copies the entire task_struct, including ->bpf_storage member]
[RLIMIT_NPROC check fails]
delayed_free_task
free_task
bpf_task_storage_free
rcu_dereference(task->bpf_storage)
bpf_local_storage_destroy
In this case, the nascent task's ->bpf_storage member that
bpf_local_storage_destroy() operates on is a plain copy of the parent's
->bpf_storage pointer, not a real initialized pointer.
This leads to badness (kernel hangs, UAF).
This is reachable as long as the process calling fork() has been inserted
into a task storage map.
Cc: stable@kernel.org
Fixes: a10787e6d5 ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The local "finish" pointer in xe_vma_userptr_force_invalidate() is
unconditionally written before each read, so the static storage class
serves no purpose. Worse, it makes the variable a process-wide shared
slot: the function's per-VM asserts do not exclude concurrent callers
on different VMs, so two such callers can race on the slot and take
the wrong if (finish) branch.
The function is gated by CONFIG_DRM_XE_USERPTR_INVAL_INJECT
(developer/test option, default n), so production builds are
unaffected.
Drop the static.
Fixes: 18c4e53695 ("drm/xe/userptr: Convert invalidation to two-pass MMU notifier")
Assisted-by: Claude:claude-opus-4.7
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Zongyao Bai <zongyao.bai@intel.com>
Link: https://patch.msgid.link/20260625224452.3243231-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \
drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper]
Call Trace:
xe_vma_userptr_do_inval+0x40d/0xfd0 [xe]
xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe]
xe_vma_userptr_force_invalidate+0xde/0x290 [xe]
vma_check_userptr.constprop.0+0x1c6/0x220 [xe]
xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe]
...
xe_vm_bind_ioctl+0x3a0a/0x4480 [xe]
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Assisted-by: Claude:claude-opus-4.7
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260625215615.3016892-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Add a new helper clk_determine_rate_noop() that's for clocks where the
rate rounding is handled by the firmware/hardware, or the clock is
capable of any rate. The requested rate is passed through unchanged,
and the actual rate will be learned via recalc_rate() after the rate
is set.
This shared helper will be used to get rid of the driver-specific empty
determine rate implementations that are present in the tree.
Signed-off-by: Brian Masney <bmasney@redhat.com>
The init.ops is assigned a default value, however right below it is an
if, else if, and else where all of them also assign a value to init.ops.
Drop the redundant init.ops assignment at the top.
Fixes: 3b9ea606cd ("clk: imx: scu: add cpu frequency scaling support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Convert the DUMMY_CLOCK_* constants over to use HZ_PER_MHZ.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The clk documentation currently has a separate list of some members of
struct clk_core and struct clk_ops. Now that all of these structures
have proper kernel docs, let's go ahead and just include them here via
the identifiers statement in kerneldoc.
While changes are being made here, let's also include the clk flags.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Document all of the members of struct clk_core.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Let's add a DOC section for the clk core flags, and move the
documentation for each flag into the doc header so that it can
be easily referenced in the generated kernel documentation.
Note: The comment about "Please update clk_flags..." is included as a
separate comment so it doesn't show up in the generated documents.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Add an example test suite name 'example_test_skip_suite' to
'kunit-example-test.c' that shows how to skip an entire test suite based on
runtime conditions.
The example suite 'example_skip_suite' provides a 'suite_init' callback
named example_skip_suite_init() which marks the entire suite as skipped
using kunit_mark_skipped().
This demonstrates a way for conditionally skipping test suites when any
prerequisites for kunit_suite execution are not met. The 'suite_init'
callback can perform any necessary checks and mark the suite as skipped,
preventing all test cases from executing while also indicating why the
suite was skipped.
Link: https://lore.kernel.org/r/20260626085811.151133-3-vaibhav@linux.ibm.com
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit provides mechanisms to skip individual test cases, but
there is no way to skip an entire test suite based on runtime conditions
checked during suite initialization. This limitation forces test suites
to either fail or skip tests individually when certain prerequisites are
not available.
To address this limitation, the patch adds a 'status' field to struct
kunit_suite that allows suite_init callbacks to mark the entire suite as
KUNIT_SKIPPED. When a suite is marked as skipped, all test cases within
that suite are bypassed without execution.
The patch proposed changes to kunit_suite_has_succeeded() to Check suite
status before evaluating individual test case results. Also
kunit_run_tests() is updated to skip suite execution if kunit_suite's
'status' is KUNIT_SKIPPED, thats either set before suite_init or by the
suite_init callback itself. kunit_init_suite() is updated to initialize the
'status' of kunit_suite to KUNIT_SUCCESS so that any skipped suite's can be
restarted from debugfs.
This enables test suites to perform runtime capability checks in their
'suite_init' callback and gracefully skip all tests when prerequisites are
not met, rather than reporting failures or requiring each test case to
perform redundant checks. In case a kunit-suite is skipped it can be re-run
from the kunit's debugfs interface.
Also update debugfs_print_results() to clearly log the kunit-suite as
'SKIP'. kunit_suite_has_succeeded() is also updated on which
debugfs_print_results() depends to update 'kunit_suite.status' in case any
of the kunit_case has failed.
Finally, update KUnit Rust binding macro-rule 'kunit_unsafe_test_suite' to
add and initialize the newly introduced 'kunit_suite.status'. Without this
'kunit_suite.status' field is never initialized which is an error for the
Rust compiler.
Link: https://patchwork.kernel.org/project/linux-kselftest/patch/20260626085811.151133-2-vaibhav@linux.ibm.com/mbox/
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Enable the MU2 (Message Unit 2) node on the i.MX8MP Audio Board v2.
MU2 is required for inter-processor communication between the
application CPU and the HiFi4 DSP, allowing DSP firmware to exchange
control and status messages with the Linux host.
Without this change, the DSP driver cannot establish the message
channel and DSP audio processing is non-functional.
Fixes: bf68c18150 ("arm64: dts: imx8mp-ab2: add support for NXP i.MX8MP audio board (version 2)")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add alias for lpuart5 so the UART gets a stable line number.
Without this alias, the lpuart driver fails:
fsl-lpuart 42590000.serial: failed to get alias id, errno -19
This prevents the Bluetooth controller connected to this UART from
working.
Fixes: 104a391bb6 ("arm64: dts: freescale: imx95-toradex-smarc: Enable bluetooth on lpuart5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The start address of the DRAM area is 0x80000000. The minimal size of the
DDR on the SoM is 1 GiB.
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The HiSilicon clock symbols already depend on ARCH_HISI or COMPILE_TEST,
but the parent clock Makefile only descends into the hisilicon directory
when ARCH_HISI is enabled.
Add a hidden family gate selected by the HiSilicon clock and reset symbols,
default it for ARCH_HISI, and use it for the parent Makefile descent. This
keeps existing platform builds unchanged while allowing compile-test
coverage.
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/hisilicon/
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Sashiko detected potential coefficient overflow if large shunt resistor
is used. When going unnoticed it can cause "drastically incorrect
telemetry scaling factors" as Sashiko put it.
I am not convinced such "drastically incorrect telemetry scaling
factors" could have gone unnoticed, so I suspect such large shunt
resistors aren't really used. Well, it shouldn't hurt to detect the
error and abort the probe before Really Wrong current / power -values
are reported to user by the hwmon.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/d9e3320dbd62e094ff89598cb3aac5b5e716f9e7.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 87102808d0 ("hwmon: (pmbus/adm1275) Validate device ID")
Link: https://lore.kernel.org/r/c8ad38e0cdb347261c6245de2b7965e747f28d22.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a proper NULL check for the kmalloc() return value in syslog_show().
If memory allocation fails, syslog would be NULL and passing it to
misc_syslog() could lead to a NULL pointer dereference.
Fixes: 80a4062e88 ("firmware: imx: sm-misc: Dump syslog info")
Signed-off-by: Li Jun <lijun01@kylinos.cn>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The Kconfig entry for the MAX6697 sensor doesn't contain a
`select REGMAP_I2C` parameter, causing build failures if regmap
isn't selected previously during the build process.
Fixes: 3a2a8cc3fe ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260629-add-kconfig-deps-v1-3-8104df929b1a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Kconfig entry for the MAX1619 sensor doesn't contain a
`select REGMAP` parameter, causing build failures if regmap
isn't selected previously during the build process.
Fixes: f8016132ce ("hwmon: (max1619) Convert to use regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260629-add-kconfig-deps-v1-1-8104df929b1a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
w83627hf_probe() creates cpu0_vid and vrm with device_create_file() when
VID information is available.
The error path and remove callback only remove the common and optional
attribute groups. Those groups do not contain cpu0_vid or vrm, so the
files can remain after a later probe failure or after device removal
while their callbacks still expect live driver data.
Remove the standalone VID sysfs files from both the probe error path and
the remove callback.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260615064732.48113-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
w83793_probe() creates the vrm sysfs file after creating the VID files
when VID support is present.
The normal remove path deletes vrm, but the probe error path only
removes the sensor, SDA, VID, fan, PWM and temperature files. A later
probe failure can therefore leave vrm behind after the driver data has
been freed.
Remove vrm in the probe error path next to the VID files, matching the
normal remove path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260615064806.51139-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The nointxmask and disable_idle_d3 module parameters remain writable,
but vfio-pci now latches their values into each device at init. Once a
device is registered, changing the module parameter only affects future
devices, leaving no direct way to confirm the effective policy for an
existing device.
Add a pci debugfs directory under the VFIO device debugfs root and
report the per-device nointxmask and disable_idle_d3 values. These are
read-only debugfs views and use the same Y/N bool output convention as
the module parameters.
Read-only vfio-pci parameters, such as disable_vga, are not exposed here
because they cannot drift from the latched device value, therefore the
existing module parameter exposure via sysfs is sufficient.
Note that while only vfio-pci currently provides these options, the
implementation is in vfio-pci-core and therefore properly reflects the
device policy in the core, regardless of driver.
Assisted-by: OpenAI Codex:gpt-5
Cc: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-7-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister.
Fixes: 2202844e44 ("vfio/migration: Add debugfs to live migration driver")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260615192725.6A2221F000E9@smtp.kernel.org
Cc: stable@vger.kernel.org
Cc: Longfang Liu <liulongfang@huawei.com>
Assisted-by: OpenAI Codex:gpt-5
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615204717.735302-1-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
