Commit 835de37603 ("meminfo: add a per node counter for balloon
drivers") added NR_BALLOON_PAGES and exposed it in /proc/meminfo.
However, the per-node view at /sys/devices/system/node/nodeX/meminfo was
not updated, even though the counter is already tracked per-node.
Add it to node_read_meminfo() so users can see balloon usage per NUMA node
without having to parse the raw vmstat file.
Link: https://lore.kernel.org/20260509005631.17183-1-hao.ge@linux.dev
Signed-off-by: Hao Ge <hao.ge@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_rand() on the sampling_addr hot path called get_random_u32_below(),
which takes a local_lock_irqsave() around a per-CPU batched entropy pool
and periodically refills it with ChaCha20. At elevated nr_regions counts
(20k+), the lock_acquire / local_lock pair plus __get_random_u32_below()
dominate kdamond perf profiles.
Replace the helper with a lockless lfsr113 generator (struct rnd_state)
held per damon_ctx and seeded from get_random_u64() in damon_new_ctx().
kdamond is the single consumer of a given ctx, so no synchronization is
required. Range mapping uses traditional reciprocal multiplication,
similar as get_random_u32_below(); for spans larger than U32_MAX (only
reachable on 64-bit) the slow path combines two u32 outputs and uses
mul_u64_u64_shr() at 64-bit width. On 32-bit the slow path is dead code
and gets eliminated by the compiler.
The new helper takes a ctx parameter; damon_split_regions_of() and the
kunit tests that call it directly are updated accordingly.
lfsr113 is a linear PRNG and MUST NOT be used for anything
security-sensitive. DAMON's sampling_addr is not exposed to userspace and
is only consumed as a probe point for PTE accessed-bit sampling, so a
non-cryptographic PRNG is appropriate here.
Tested with paddr monitoring and max_nr_regions=20000: kdamond CPU usage
reduced from ~72% to ~50% of one core.
Link: https://lore.kernel.org/20260505145212.108644-1-jiayuan.chen@linux.dev
Link: https://lore.kernel.org/damon/20260426173346.86238-1-sj@kernel.org/T/#m4f1fd74112728f83a41511e394e8c3fef703039c
Link: https://lore.kernel.org/20260509011816.85145-1-sj@kernel.org
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shu Anzai <shu17az@gmail.com>
Cc: Quanmin Yan <yanquanmin1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SG2042's PCIe root complexes are cache-coherent with the CPU. Mark all
four PCIe controller nodes (pcie_rc0 through pcie_rc3) as dma-coherent
so the kernel uses coherent DMA mappings instead of non-coherent bounce
buffering.
Cc: stable@vger.kernel.org
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20260331171248.973014-3-gaohan@iscas.ac.cn
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
"userfaultfd: verify VMA state across UFFDIO_COPY retry", which is a
prerequisite for mm-unnstable's series "userfaultfd: merge
fs/userfaultfd.c into mm/userfaultfd.c".
dsa_port_from_netdev() may return a valid port from a different switch
chip. Programming another chip's port index into the local hardware
causes redirection to the wrong port, or an out-of-bounds access if the
index exceeds the local chip's port count.
Apply a minimal fix that adds a check to catch this case and adjusts the
extack message. When cls->common.skip_sw is not set, the operation could
instead redirect to the upstream port and let the software or upstream
switch(es) handle the forward, but that is not addressed here.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260530003940.2000994-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit builds on the implementation of the GT WA testing, increasing
the scope of testing to include the device OOB workaround list. As well
as checking for XE_RTP_ENGINE_CLASS(), this test also checks for rules
involving XE_RTP_GRAPHICS() and XE_RTP_MEDIA(), as well as their
derivatives.
This test will raise expectation fails for any workarounds in the
device_oob_was list that has an invalid rule type, preventing evaluation
or inclusion of rules that could be applied in the wrong context.
v6:
- No change
v5:
- No change
v4:
- No change
v3:
- Removed "VISIBLE_IF_KUNIT" keyword from xe_wa.h
- Heavily reworked rule checking within _dev_oob_test() function for
easier understanding and interpreting of errors
v2:
- Changed xe_rtp_table_dev_oob_test() to follow format of
xe_rtp_table_gt_test
- Changed device_oob_was generated params to follow format of
gt_was
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260601200947.2032784-10-violet.monti@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
This commit builds on the implementation of the GT WA testing, increasing
the scope of testing to include the OOB workaround list. The added test
checks for workarounds with XE_RTP_ENGINE_CLASS() rules and raises an
expectationfailure if any are found. Unlike the GT workarounds, there are
no flags within this workaround list, so all invalid rules will fail.
v6:
- No change
v5:
- No change
v4:
- No change
v3:
- Removed VISIBLE_IF_KUNIT keyword from xe_wa.h
- Reworked KUNIT_EXPECT_TRUE for easier decoding of errors
v2:
- Changed xe_rtp_table_oob_test() to follow format of
xe_rtp_table_gt_test
- Changed oob_was generated params to follow format of gt_was
generated params
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260601200947.2032784-9-violet.monti@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
It is currently possible for a RTP rule, and subsequently a workaround,
to expect contexts that may not be present when the workaround is
applied. For example, the workarounds in the engine_was[] in drm/xe/xe_wa.c
expect an engine entity to be active. Conversely, the gt_was[] is not
depending on an engine entity to implement its workarounds. This kunit
test addition checks the gt_was[] workaround list for any workarounds
with XEP_RTP_ENGINE_CLASS() rules. If a workaround does have one of
these rules, the workaround is then checked for the "FOREACH_ENGINE" flag,
which ensures the workaround is implemented properly.
The result of this test is an expectation failure if a workaround has an
improper XE_RTP_ENGINE_CLASS() rule setup, and aims to prevent future
issues of gt_was workarounds being applied without proper contexts.
The gt_tunings[] RTP table has the same functional layout and
requirements as gt_was[], so it shares the same kunit test function,
minimizing excessive code.
v6:
- No change
v5:
- Remove unnecessary headers from xe_rtp_table_test.c
v4:
- No change
v3:
- Removed "VISIBLE_IF_KUNIT" keyword from xe_wa.h
- Added gt_tunings[] for testing
- Reworked KUNIT_EXPECT_TRUE() for easier parsing of errors
v2:
- Moved contents of xe_rtp_tables_test.h to .c and removed file
- Renamed macro RTP_KUNIT_ARRAY_PARAM to RTP_TABLE_PARAM
- Removed unnecessary functions and iterative components from
generated _gen_params functions and implemented usage of table
name and WA number as entry name
- Condensed xe_rtp_table_gt_test() to use KUNIT_EXPECT_TRUE with no
message statement
- Removed xe_rtp_table_test_init() and xe_rtp_table_test_exit() as
fake device initialization is not necessary
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260601200947.2032784-8-violet.monti@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
We currently have a mixture of styles for our RTP tables with respect of
how we define the number of entries:
* xe_rtp_process_to_sr() expects to receive the number of entries as
arguments;
* xe_rtp_process() expects the array to have a sentinel at the end of
the array;
* in xe_rtp_test.c, even though xe_rtp_process_to_sr() does not
require a sentinel value, we need to rely on that technique to be
able to count xe_rtp_entry_sr entries because simply using
ARRAY_SIZE() is not possible.
The style used by xe_rtp_process_to_sr() makes it hard to share the
tables with other compilation units (e.g. kunit tests), since the number
of entries is calculated with ARRAY_SIZE(), which is done at compile
time.
Since we use the size of the tables to create some bitmasks, using a
sentinel style doesn't seem great either.
A way to reconcile things into a single style is to have a struct type
that would hold the entries array and the number of entries. Since we
have xe_rtp_entry and xe_rtp_entry_sr, we would have one type for each.
The advantage of the proposed approach is that now we have a nice way to
share the tables directly to kunit tests with information about their
size.
v6:
- Removed sentinels that are not needed
v5:
- Removed added code from conflict resolution issues
v4:
- Removed conflicts with main branch
v3:
- No changes
v2:
- Add compatibility with new xe_rtp_table_sr format for
"bad-mcr-reg-forced-to-regular" and
"bad-regular-reg-forced-to-mcr"
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260601200947.2032784-7-violet.monti@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The chenridong@huaweicloud.com is no longer a valid email,
replace it with the personal email ridong.chen@linux.dev
Signed-off-by: Ridong Chen <ridong.chen@linux.dev>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired.
Fixes: 8195136669 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Closes: https://lore.kernel.org/all/20260601124156.2205704-1-mfleming@cloudflare.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add the missing @may_sleep parameter description to the
mpc52xx_fec_stop kernel-doc comment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260531000042.369043-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state.
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Zhao Zhang <zzhan461@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/fac6043fa20a2ff68e12958c431836f692c51268.1780113823.git.zzhan461@ucr.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dec_ttl action support to the OVS kernel datapath selftest
framework:
- Add dec_ttl nested NLA class to ovs-dpctl.py with proper
OVS_DEC_TTL_ATTR_ACTION sub-attribute handling
- Add parse support for dec_ttl(le_1(<inner_actions>)) action
string, consistent with the odp-util.c format where le_1()
holds the actions taken when TTL reaches 1
- Add dpstr output formatting for dec_ttl actions
- Add test_dec_ttl() to openvswitch.sh that verifies:
* Normal TTL packets are forwarded after decrement
* TTL=1 packets are dropped (TTL expiry)
* Graceful skip via ksft_skip if kernel lacks dec_ttl support
The dec_ttl class uses late-binding type resolution to reference
ovsactions for its inner action list, avoiding circular references
at class definition time.
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260530021443.1734484-1-houminxi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In fec_resume(), fec_enet_clk_enable() is called before
pinctrl_pm_select_default_state() in the non-WoL path, inverting the
ordering used in fec_suspend() which correctly switches to the sleep
pinctrl state before disabling clocks.
For PHYs with the PHY_RST_AFTER_CLK_EN flag (e.g. TI DP83848 or
SMSC LAN87xx), fec_enet_clk_enable() triggers a hardware reset pulse
via the phy-reset GPIO. With the GPIO pin still in sleep pinctrl state
at that point, the GPIO write has no physical effect and the PHY never
receives the required reset after clock enable, leading to unreliable
link establishment after system resume.
Fix by restoring the default pinctrl state before enabling clocks,
making resume the proper mirror of suspend. The call is made
unconditionally: fec_suspend() only switches to the sleep pinctrl state
on the non-WoL path and leaves the pins in the default state when WoL
is enabled, so on a WoL resume the device is already in the default
state and pinctrl_pm_select_default_state() is a no-op.
Fixes: de40ed31b3 ("net: fec: add Wake-on-LAN support")
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260529-b4-fec-resume-pinctrl-order-v3-1-6eda0f592fca@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there is no config fragment for the rseq selftests but there are
a couple of configuration options which are required for running them:
- CONFIG_RSEQ is required for obvious reasons, it is enabled by default
but it doesn't hurt to specify it in case the user is usinsg a
defconfig that disables it.
- CONFIG_RSEQ_SLICE_EXTENSION is tested by the slice_test test, the
test will fail without it.
Add a configuration fragment which enables these options, helping encourage
CI systems and people doing manual testing to run the tests with all the
features. This also requires CONFIG_EXPERT since it is a dependency for
slice extension.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260424-selftests-rseq-config-fragment-v2-1-a9475996edcb@kernel.org
Tariq Toukan says:
====================
net/mlx5: Avoid payload in skb's linear part for better GRO-processing
This is V7 of a series originally submitted by Christoph.
When LRO is enabled on the MLX, mlx5e_skb_from_cqe_mpwrq_nonlinear
copies parts of the payload to the linear part of the skb.
This triggers suboptimal processing in GRO, causing slow throughput.
This patch series addresses this by using eth_get_headlen to compute the
size of the protocol headers and only copy those bits. This results in a
significant throughput improvement (detailed results in the specific
patch).
====================
Link: https://patch.msgid.link/20260601061522.398044-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_skb_from_cqe_mpwrq_nonlinear() copies MLX5E_RX_MAX_HEAD (256)
bytes from the page-pool to the skb's linear part. Those 256 bytes
include part of the payload.
When attempting to do GRO in skb_gro_receive, if headlen > data_offset
(and skb->head_frag is not set), we end up aggregating packets in the
frag_list.
This is of course not good when we are CPU-limited. Also causes a worse
skb->len/truesize ratio,...
So, let's avoid copying parts of the payload to the linear part. We use
eth_get_headlen() to parse the headers and compute the length of the
protocol headers, which will be used to copy the relevant bits of the
skb's linear part.
We still allocate MLX5E_RX_MAX_HEAD for the skb so that if the networking
stack needs to call pskb_may_pull() later on, we don't need to reallocate
memory.
This gives a nice throughput increase (ARM Neoverse-V2 with CX-7 NIC and
LRO enabled):
BEFORE:
=======
(netserver pinned to core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,9 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.01 32547.82
(netserver pinned to adjacent core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,10 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.00 52531.67
AFTER:
======
(netserver pinned to core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,9 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.00 52896.06
(netserver pinned to adjacent core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,10 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.00 85094.90
Additional tests across a larger range of parameters w/ and w/o LRO, w/
and w/o IPv6-encapsulation, different MTUs (1500, 4096, 9000), different
TCP read/write-sizes as well as UDP benchmarks, all have shown equal or
better performance with this patch.
For XDP pull at most ETH_HLEN bytes in the linear area so that XDP_PASS
can also benefit from this improvement and keep things simple when
dealing with skb geometry changes from the XDP program.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260601061522.398044-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Doing the call to dma_sync_single_for_cpu() earlier will allow us to
adjust headlen based on the actual size of the protocol headers.
Doing this earlier means that we don't need to call
mlx5e_copy_skb_header() anymore and rather can call
skb_copy_to_linear_data() directly.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260601061522.398044-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the necessary bits into the gen2 platforms tables and handlers
to allow decoding streams into 10bit pixel formats.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The 10bit pixel format can be only used when the decoder identifies the
stream as decoding into 10bit pixel format buffers, so update the
find_format helper to filter the formats and only allow the proper
formats when setting or trying a capture format.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Update the gen2 response and vdec s_fmt code to take in account
the P010 and QC010 when calculating the width, height and stride.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add the necessary plumbing into the HFi Gen2 to signal the decoder
the right 10bit pixel format and stride when in compressed mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The P010 (YUV format with 16-bits per pixel with interleaved UV)
and QC10C (P010 compressed mode similar to QC08C) requires specific
buffer calculations to allocate the right buffer size for the DPB
(decoded picture buffer) frames and frames consumed by userspace.
Similar to 8bit, the 10bit DPB frames uses QC10C format.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Use div_u64() instead of mult_fract as u64 operator division fails on 32 bit
systems which don't link against libgcc.
Fixes: 5c66647a5c ("media: iris: add FPS calculation and VPP FW overhead in frequency formula")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606030132.qnBXVDkM-lkp@intel.com/
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
VLAN-tagged interfaces on lan743x devices were previously unreachable via
SSH and failed to respond to large ping packets (e.g. "ping -s 1469" given
MTU=1500). In these scenarios, "ethtool -S" reports non-zero "RX Oversize
Frame Errors". According to Microchip AN2948, the MAC_RX FSE (VLAN field
size enforcement) bit determines whether frames with VLAN tags exceeding
the base MTU plus tag length are discarded.
The driver must set the MAC_RX.FSE bit before setting MAC_RX.RXEN to allow
VLAN-tagged frames up to the interface MTU, preventing them from being
treated as oversized. As a result, both the base and VLAN-tagged interfaces
can use the same MTU without receive errors.
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Thangaraj Samynathan <Thangaraj.s@microchip.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de> # lan7430 on arm64 (RevPi
Link: https://patch.msgid.link/20260529210300.433135-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace hard-coded strings with the str_enabled_disabled() helper. This
unifies the output and helps the linker with deduplication, which can result
in a smaller binary. Additionally, address the following Coccinelle/coccicheck
warning reported by string_choices.cocci:
opportunity for str_enabled_disabled(uv_pch_intr_now_enabled)
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://patch.msgid.link/20260504181945.143928-2-thorsten.blum@linux.dev
Now that we have the ability to represent the context in which a DRM device
is in at compile-time, we can start carrying around this context with GEM
object types in order to allow a driver to safely create GEM objects before
a DRM device has registered with userspace.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260507220044.3204919-4-lyude@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This is just a type alias that resolves into the AllocImpl for a given
T: drm:💎:DriverObject.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260507220044.3204919-3-lyude@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The vcc_sdio regulator supports 1.8V to 3.4V output range according to
its datasheet.
The current DT incorrectly limits the max voltage to 3.0V. This limit
causes issues issues downstream with u-boot, which refuses to apply the
out-of range value, and falls back to the minimum in that range: 1.8V.
This is insufficient to power the SD card, so driver initialisation
fails and booting from it does not work.
Set regulator-max-microvolt to 3400000 µV to match hardware capability.
This matches the rk3399-orangepi for the same regulator.
Signed-off-by: Hugo Osvaldo Barrera <hugo@whynothugo.nl>
Reviewed-by: Dang Huynh <dang.huynh@mainlining.org>
Link: https://patch.msgid.link/20260519094439.7918-1-hugo@whynothugo.nl
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NanoPi Zero2 has one USB 2.0 Type-A HOST port and one USB 2.0 Type-C
OTG port.
Add support for using the USB 2.0 ports on NanoPi Zero2.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260529190355.4148175-6-heiko@sntech.de
The ArmSoM Sige1 has two USB 2.0 Type-A HOST ports behind an onboard
USB hub, and one USB 2.0 Type-C OTG port.
Add support for using the USB 2.0 ports on ArmSoM Sige1.
The onboard USB hub handles OHCI so only the EHCI controller is enabled.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
[added phy-supply for otg port]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260529190355.4148175-5-heiko@sntech.de
The ROCK 2A has three USB 2.0 Type-A HOST ports behind an onboard
USB hub, and one USB 3.0 Type-A port.
And the ROCK 2F has two USB 2.0 Type-A HOST ports behind an onboard
USB hub, and one USB 2.0 Type-C OTG port.
Add support for using the USB ports on Radxa ROCK 2A/2F.
The onboard USB hub handles OHCI so only the EHCI controller is enabled.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260529190355.4148175-4-heiko@sntech.de
The Radxa E20C has one USB2.0 Type-A HOST port and one USB2.0 Type-C port.
The Type-C port is conneced to a FE1.1s_QFN USB hub on the board, with its
ports being connected to the XHCI usb controller and an usb-uart bridge.
This also means, the XHCI controller can only be used in device-mode.
Add support for using the USB 2.0 ports on Radxa E20C.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
[set xhci to peripheral and add comment about the outward-facing hub]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260529190355.4148175-3-heiko@sntech.de
Rockchip RK3528 has one USB 3.0 DWC3 controller and oneUSB 2.0 EHCI/OHCI
controller and uses an Innosilicon-USB2PHY for USB 2.0. The DWC3
controller additionally uses the Naneng Combo PHY for USB3.
Add device tree nodes to describe these USB controllers along with the
USB 2.0 PHYs.
[moved snps,dis_u2_susphy_quirk here from individual boards,
describe both usb2+3 default phy connections, usb2 boards can override]
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260529190355.4148175-2-heiko@sntech.de
Convert analogix_dp_is_slave_video_stream_clock_on() and
analogix_dp_is_video_stream_on() from int to bool return type.
This makes the code more readable and aligns with kernel best
practices for boolean status checks, while simplifying the
callers by removing unnecessary "== 0" comparisons.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260521102716.1373519-1-damon.ding@rock-chips.com
rockchip_drm_sys_resume()/drm_mode_config_helper_resume() is called
before the resume pm ops of dw-hdmi. This result in an atomic_enable()
before dw_hdmi_rockchip_resume()/dw_hdmi_resume() is called.
Resume (without changes):
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
- dw_hdmi_rockchip_resume()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
Change to use resume_early pm ops for system suspend to ensure pm ops
for dw-hdmi is run before rockchip-drm pm ops. Also fix a possible NULL
pointer dereference timing issue while at it.
Resume (with changes):
- dw_hdmi_rockchip_resume_early()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-12-jonas@kwiboo.se
The HDMI block is currently hardcoded to expect RGB output from the
display controller. However, the VOP in some SoCs are capable of YCbCr
output to the HDMI block.
Read the negotiated bus format from the bridge state and propagate it to
the CRCT state in form of output mode and bus format. Treat the format
MEDIA_BUS_FMT_FIXED as RGB888 and reject any unsupported formats.
This has no inpact until dw-hdmi bridge is fully converted to a HDMI
bridge and also adds support for the "color format" connector property.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-11-jonas@kwiboo.se
The HDMI helpers negotiated TMDS character rate and output bpc are
available from the connector state. Change the encoder helper from
mode_set() to atomic_mode_set() so these values can be used to configure
the HDMI PHY using phy_configure().
This has no impact until the dw-hdmi bridge is fully converted into a
HDMI bridge and HDMI helpers are used to assign hdmi.tmds_char_rate.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-10-jonas@kwiboo.se
All in-tree RK3568/RK3566 device trees using HDMI also include the
required hdmi-connector node at port@1 since their introduction.
Define the output_port for RK3568 so that dw-hdmi bridge driver can pick
up the display-connector bridge once the dw-hdmi connector is replaced
with a bridge connector in a future change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-9-jonas@kwiboo.se
Move the blank line before the RK3328 definitions for readability and
make the phy_config table spacing consistent with other tables.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-8-jonas@kwiboo.se
Remove the empty disable() and static return true mode_fixup() encoder
helper funcs as they do not provide any useful functionality.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-7-jonas@kwiboo.se
Take a reference on the dw-hdmi bridge during bind and drop it again
from unbind to ensure the bridge is kept alive for the lifetime of the
encoder component.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-6-jonas@kwiboo.se
Inline rockchip_hdmi_parse_dt() into dw_hdmi_rockchip_bind() so the
probe path is easier to follow in one place. Also ensure failures in
bind() use dev_err_probe() so probe deferrals and errors are reported
consistently.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-5-jonas@kwiboo.se
Change to use drmres helpers drmm_kzalloc() to allocate driver data
and drmm_encoder_init() to initialize the encoder. With use of drmres
the manual encoder cleanup in failure path and unbind is also removed.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-4-jonas@kwiboo.se
Replace indirect struct device accesses via hdmi->dev and pdev->dev with
the local dev parameter already available in dw_hdmi_rockchip_bind(),
for consistency and readability.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-3-jonas@kwiboo.se
Change to use of_device_get_match_data() to get match data prior to
allocating private data. All current entries in the of_device_id match
table provide match data, so no functional change is intended.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-2-jonas@kwiboo.se
The RDS IB connection teardown path is written so it can run during
partial startup and on repeated shutdown attempts. It uses NULL
pointers to distinguish resources that are still owned from resources
that have already been released.
When rds_ib_setup_qp() fails after allocating i_sends but before
allocating i_recvs, the sends_out path frees i_sends without clearing
the pointer. A later shutdown pass can still treat that stale pointer
as a live send ring allocation.
Clear i_sends after vfree() in the error unwind path so the existing
shutdown logic continues to use the correct ownership state.
Fixes: 3b12f73a5c ("rds: ib: add error handle")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/5a0f7624bb9845a7b67d26166a150b59e7f394ce.1779632468.git.xuyq21@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.
The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.
Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic().
Fixes: 3bfdc63936 ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Signed-off-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
